President's Export Council Subcommittee on Export Administration; Notice of Open Meeting, 66685 [2011-27821]
Download as PDF
<![CDATA[
Federal Register / Vol. 76, No. 208 / Thursday, October 27, 2011 / Notices
subsequent 15-day period to January 10,
2012.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room 2111,
U.S. Department of Commerce, 1401
Constitution Avenue NW., Washington,
DC 20230–0002, and in the ‘‘Reading
Room’’ section of the Board’s Web site,
which is accessible via https://
www.trade.gov/ftz.
For further information, contact
Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202)
482–0473.
Dated: October 21, 2011.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2011–27856 Filed 10–26–11; 8:45 am]
BILLING CODE P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 66–2011]
wreier-aviles on DSK7SPTVN1PROD with NOTICES
Foreign-Trade Zone 37—Orange
County, NY, Application for Subzone,
ITT Water Technology, Inc. (Centrifugal
and Submersible Pumps), Auburn, NY
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by the County of Orange, New
York, grantee of FTZ 37, requesting
special purpose subzone status for the
centrifugal and submersible pump
manufacturing and warehousing
facilities of ITT Water Technology, Inc.
(ITTWT), located in Auburn, New York.
The application was submitted pursuant
to the provisions of the Foreign-Trade
Zones Act, as amended (19 U.S.C. 81a–
81u), and the regulations of the Board
(15 CFR part 400). It was formally filed
on October 21, 2011.
The ITTWT facilities (224 employees)
consist of two sites: Site 1—
manufacturing plant (24.5 acres) located
at One Goulds Drive, Auburn, New
York; and, Site 2—warehouse (2.5 acres)
located at 38 York Street, Auburn. The
facilities are used to manufacture and
distribute centrifugal and submersible
pumps and related controllers (up to
one million units of each per year) used
in commercial, residential, and waste
water applications. Components and
materials sourced from abroad
(representing 39% of the value of the
finished pumps) include: electric
motors, pump parts, mechanical seals,
plastic o-rings, rubber o-rings, shafts,
flanges, motor and shaft couplings, and
VerDate Mar<15>2010
14:47 Oct 26, 2011
Jkt 226001
fasteners (duty rates range from free to
8.5 percent).
DEPARTMENT OF COMMERCE
FTZ procedures could exempt ITTWT
from customs duty payments on the
foreign components used in export
production. The company anticipates
that some 10 percent of the facilities’
shipments will be exported. On its
domestic sales, ITTWT would be able to
choose the duty rates during customs
entry procedures that apply to finished
centrifugal and submersible pumps
(duty free) and controllers (1.5%) for the
foreign inputs noted above. FTZ
designation would further allow ITTWT
to realize logistical benefits through the
use of weekly customs entry procedures.
Customs duties also could possibly be
deferred or reduced on foreign status
production equipment. The request
indicates that the savings from FTZ
procedures would help improve the
facilities’ international competitiveness.
66685
Bureau of Industry and Security
In accordance with the Board’s
regulations, Pierre Duy of the FTZ Staff
is designated examiner to evaluate and
analyze the facts and information
presented in the application and case
record and to report findings and
recommendations to the Board.
Public comment is invited from
interested parties. Submissions (original
and 3 copies) shall be addressed to the
Board’s Executive Secretary at the
address below. The closing period for
their receipt is December 27, 2011.
Rebuttal comments in response to
material submitted during the foregoing
period may be submitted during the
subsequent 15-day period to January 10,
2012.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room 2111,
U.S. Department of Commerce, 1401
Constitution Avenue NW., Washington,
DC 20230–0002, and in the ‘‘Reading
Room’’ section of the Board’s Web site,
which is accessible via https://
www.trade.gov/ftz.
For further information, contact Pierre
Duy at Pierre.Duy@trade.gov or (202)
482–1378.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2011–27854 Filed 10–26–11; 8:45 am]
BILLING CODE P
PO 00000
President’s Export Council
Subcommittee on Export
Administration; Notice of Open
Meeting
The President’s Export Council
Subcommittee on Export
Administration (PECSEA) will meet on
November 14, 2011, 10 a.m., at the U.S.
Department of Commerce, Herbert C.
Hoover Building, Room 3884, 14th
Street between Pennsylvania and
Constitution Avenues, NW.,
Washington, DC. The PECSEA provides
advice on matters pertinent to those
portions of the Export Administration
Act, as amended, that deal with United
States policies of encouraging trade with
all countries with which the United
States has diplomatic or trading
relations and of controlling trade for
national security and foreign policy
reasons.
Agenda:
1. Opening remarks by the Chairman
and Vice Chairman.
2. Opening remarks by the Bureau of
Industry and Security.
3. Presentation of papers or comments
by the public.
4. Review of Deliverables for the PEC.
5. Discussion of 2012 Workplan.
6. Subcommittee Breakout Sessions.
The open session will be accessible
via teleconference to 20 participants on
a first come, first serve basis. To join the
conference, submit inquiries to Ms.
Yvette Springer at
Yvette.Springer@bis.doc.gov, no later
than, November 7, 2011.
A limited number of seats will be
available for the public session.
Reservations are not accepted. To the
extent time permits, members of the
public may present oral statements to
the PECSEA. Written statements may be
submitted at any time before or after the
meeting. However, to facilitate
distribution of public presentation
materials to PECSEA members, the
PECSEA suggests that public
presentation materials or comments be
forwarded before the meeting to Ms.
Yvette Springer at
Yvette.Springer@bis.doc.gov.
For more information, contact Yvette
Springer on 202–482–2813.
Dated: October 20, 2011.
Kevin J. Wolf,
Assistant Secretary for Export
Administration.
[FR Doc. 2011–27821 Filed 10–26–11; 8:45 am]
BILLING CODE 3510–JT–P
Frm 00004
Fmt 4703
Sfmt 4703
E:\FR\FM\27OCN1.SGM
27OCN1
]]>Agencies
[Federal Register Volume 76, Number 208 (Thursday, October 27, 2011)]
[Notices]
[Page 66685]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-27821]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
President's Export Council Subcommittee on Export Administration;
Notice of Open Meeting
The President's Export Council Subcommittee on Export
Administration (PECSEA) will meet on November 14, 2011, 10 a.m., at the
U.S. Department of Commerce, Herbert C. Hoover Building, Room 3884,
14th Street between Pennsylvania and Constitution Avenues, NW.,
Washington, DC. The PECSEA provides advice on matters pertinent to
those portions of the Export Administration Act, as amended, that deal
with United States policies of encouraging trade with all countries
with which the United States has diplomatic or trading relations and of
controlling trade for national security and foreign policy reasons.
Agenda:
1. Opening remarks by the Chairman and Vice Chairman.
2. Opening remarks by the Bureau of Industry and Security.
3. Presentation of papers or comments by the public.
4. Review of Deliverables for the PEC.
5. Discussion of 2012 Workplan.
6. Subcommittee Breakout Sessions.
The open session will be accessible via teleconference to 20
participants on a first come, first serve basis. To join the
conference, submit inquiries to Ms. Yvette Springer at
Yvette.Springer@bis.doc.gov, no later than, November 7, 2011.
A limited number of seats will be available for the public session.
Reservations are not accepted. To the extent time permits, members of
the public may present oral statements to the PECSEA. Written
statements may be submitted at any time before or after the meeting.
However, to facilitate distribution of public presentation materials to
PECSEA members, the PECSEA suggests that public presentation materials
or comments be forwarded before the meeting to Ms. Yvette Springer at
Yvette.Springer@bis.doc.gov.
For more information, contact Yvette Springer on 202-482-2813.
Dated: October 20, 2011.
Kevin J. Wolf,
Assistant Secretary for Export Administration.
[FR Doc. 2011-27821 Filed 10-26-11; 8:45 am]
BILLING CODE 3510-JT-P
