Agency Information Collection Activities; Requests for Comments: Clearance of Renewed Approval of Information Collection; Type Certification Procedures for Changed Products, 66347 [2011-27635]
Download as PDF
Federal Register / Vol. 76, No. 207 / Wednesday, October 26, 2011 / Notices
enhance the quality, utility and clarity
of the information collection; and (d)
ways that the burden could be
minimized without reducing the quality
of the collected information. The agency
will summarize and/or include your
comments in the request for OMB’s
clearance of this information collection.
Issued in Washington, DC on October 20,
2011.
Albert R. Spence,
FAA Assistant Information Collection
Clearance Officer, IT Enterprises Business
Services Division, AES–200.
[FR Doc. 2011–27628 Filed 10–25–11; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Agency Information Collection
Activities; Requests for Comments:
Clearance of Renewed Approval of
Information Collection; Type
Certification Procedures for Changed
Products
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice and request for
comments.
AGENCY:
In accordance with the
Paperwork Reduction Act of 1995, FAA
invites public comments about our
intention to request the Office of
Management and Budget (OMB)
approval to renew an information
collection. 14 CFR part 21 may require
applicants to demonstrate compliance
with the latest regulations in effect on
the date of application for amended
Type Certificates (TC) or Supplemental
TCs for aeronautical products.
DATES: Written comments should be
submitted by December 27, 2011.
FOR FURTHER INFORMATION CONTACT:
Kathy DePaepe at (405) 954–9362, or by
e-mail at: Kathy A. DePaepe @faa.gov.
SUPPLEMENTARY INFORMATION:
OMB Control Number: 2120–0657.
Title: Type Certification Procedures
for Changed Products.
Form Numbers: There are no FAA
forms associated with this collection.
Type of Review: Renewal of an
information collection.
Background: 14 CFR part 21 requires
that, with certain exceptions, all
aviation product changes comply with
the latest airworthiness standards when
determining the certification basis for
aeronautical products. This process is
intended to increase safety by applying
the latest regulations where practicable.
A certification application request, in
letter form, and a supporting data
jlentini on DSK4TPTVN1PROD with NOTICES
SUMMARY:
VerDate Mar<15>2010
16:53 Oct 25, 2011
Jkt 226001
package is made to the appropriate
Federal Aviation Administration (FAA)
Aircraft Certification Office by an
aircraft/product manufacturer/modifier.
Respondents: Approximately 2,558
manufacturers/modifiers.
Frequency: Information is collected
on occasion.
Estimated Average Burden per
Response: 7.35 hours.
Estimated Total Annual Burden:
18,815 hours.
ADDRESSES: Send comments to the FAA
at the following address: Ms. Kathy
DePaepe, Room 126B, Federal Aviation
Administration, AES–200, 6500 S.
MacArthur Blvd., Oklahoma City, OK
73169.
Public Comments Invited: You are
asked to comment on any aspect of this
information collection, including (a)
Whether the proposed collection of
information is necessary for FAA’s
performance; (b) the accuracy of the
estimated burden; (c) ways for FAA to
enhance the quality, utility and clarity
of the information collection; and (d)
ways that the burden could be
minimized without reducing the quality
of the collected information. The agency
will summarize and/or include your
comments in the request for OMB’s
clearance of this information collection.
Issued in Washington, DC on October 19,
2011.
Albert R. Spence,
FAA Assistant Information Collection
Clearance Officer, IT Enterprises Business
Services Division, AES–200.
[FR Doc. 2011–27635 Filed 10–25–11; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Agency Information Collection
Activities; Requests for Comments:
Clearance of Renewed Approval of
Information Collection; Hazardous
Materials Training Requirements
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice and request for
comments.
AGENCY:
In accordance with the
Paperwork Reduction Act of 1995, FAA
invites public comments about our
intention to request the Office of
Management and Budget (OMB)
approval to renew an information
collection. The Federal Register Notice
with a 60-day comment period soliciting
comments on the following collection of
information was published on August
24, 2011, vol. 76, no. 164, page 53024–
SUMMARY:
PO 00000
Frm 00079
Fmt 4703
Sfmt 4703
66347
53025. The collection involves
requirements for certain repair stations
to provide documentation showing that
persons handling hazmat for
transportation have been trained
following DOT guidelines.
DATES: Written comments should be
submitted by November 25, 2011.
FOR FURTHER INFORMATION CONTACT:
Kathy DePaepe at (405) 954–9362, or by
e-mail at: Kathy A. DePaepe @faa.gov.
SUPPLEMENTARY INFORMATION:
OMB Control Number: 2120–0705.
Title: Hazardous Materials Training
Requirements.
Form Numbers: There are no FAA
forms associated with this collection.
Type of Review: Renewal of an
information collection.
Background: The FAA, as prescribed
in 14 CFR parts 121 and 135, requires
certificate holders to submit manuals
and hazmat training programs, or
revisions to an approved hazmat
training program to obtain initial and
final approval as part of the FAA
certification process. Original
certification is completed in accordance
with 14 CFR part 119. Continuing
certification is completed in accordance
with part 121 and part 135. The FAA
uses the approval process to determine
compliance of the hazmat training
programs with the applicable
regulations, national policies and safe
operating practices. The FAA must
ensure that the documents adequately
establish safe operating procedures.
Respondents: Approximately 2,772
operators.
Frequency: Information is collected
on occasion.
Estimated Average Burden per
Response: 7 hours.
Estimated Total Annual Burden:
6,900 hours.
ADDRESSES:Interested persons are
invited to submit written comments on
the proposed information collection to
the Office of Information and Regulatory
Affairs, Office of Management and
Budget. Comments should be addressed
to the attention of the Desk Officer,
Department of Transportation/FAA, and
sent via electronic mail to oira_
submission@omb.eop.gov, or faxed to
(202) 395–6974, or mailed to the Office
of Information and Regulatory Affairs,
Office of Management and Budget,
Docket Library, Room 10102, 725 17th
Street, NW., Washington, DC 20503.
Public Comments Invited: You are
asked to comment on any aspect of this
information collection, including (a)
Whether the proposed collection of
information is necessary for FAA’s
performance; (b) the accuracy of the
estimated burden; (c) ways for FAA to
E:\FR\FM\26OCN1.SGM
26OCN1
Agencies
[Federal Register Volume 76, Number 207 (Wednesday, October 26, 2011)]
[Notices]
[Page 66347]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-27635]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Agency Information Collection Activities; Requests for Comments:
Clearance of Renewed Approval of Information Collection; Type
Certification Procedures for Changed Products
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice and request for comments.
-----------------------------------------------------------------------
SUMMARY: In accordance with the Paperwork Reduction Act of 1995, FAA
invites public comments about our intention to request the Office of
Management and Budget (OMB) approval to renew an information
collection. 14 CFR part 21 may require applicants to demonstrate
compliance with the latest regulations in effect on the date of
application for amended Type Certificates (TC) or Supplemental TCs for
aeronautical products.
DATES: Written comments should be submitted by December 27, 2011.
FOR FURTHER INFORMATION CONTACT: Kathy DePaepe at (405) 954-9362, or by
e-mail at: Kathy A. DePaepe @faa.gov.
SUPPLEMENTARY INFORMATION:
OMB Control Number: 2120-0657.
Title: Type Certification Procedures for Changed Products.
Form Numbers: There are no FAA forms associated with this
collection.
Type of Review: Renewal of an information collection.
Background: 14 CFR part 21 requires that, with certain exceptions,
all aviation product changes comply with the latest airworthiness
standards when determining the certification basis for aeronautical
products. This process is intended to increase safety by applying the
latest regulations where practicable. A certification application
request, in letter form, and a supporting data package is made to the
appropriate Federal Aviation Administration (FAA) Aircraft
Certification Office by an aircraft/product manufacturer/modifier.
Respondents: Approximately 2,558 manufacturers/modifiers.
Frequency: Information is collected on occasion.
Estimated Average Burden per Response: 7.35 hours.
Estimated Total Annual Burden: 18,815 hours.
ADDRESSES: Send comments to the FAA at the following address: Ms. Kathy
DePaepe, Room 126B, Federal Aviation Administration, AES-200, 6500 S.
MacArthur Blvd., Oklahoma City, OK 73169.
Public Comments Invited: You are asked to comment on any aspect of
this information collection, including (a) Whether the proposed
collection of information is necessary for FAA's performance; (b) the
accuracy of the estimated burden; (c) ways for FAA to enhance the
quality, utility and clarity of the information collection; and (d)
ways that the burden could be minimized without reducing the quality of
the collected information. The agency will summarize and/or include
your comments in the request for OMB's clearance of this information
collection.
Issued in Washington, DC on October 19, 2011.
Albert R. Spence,
FAA Assistant Information Collection Clearance Officer, IT Enterprises
Business Services Division, AES-200.
[FR Doc. 2011-27635 Filed 10-25-11; 8:45 am]
BILLING CODE 4910-13-P