Airworthiness Directives; Bombardier, Inc. Model CL-600-2A12 (CL- 601) and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) Airplanes, 46597-46598 [C1-2011-17402]
Download as PDF
<![CDATA[
Federal Register / Vol. 76, No. 149 / Wednesday, August 3, 2011 / Rules and Regulations
food sales in 2009. Between 1990 and
2008, organic food sales historically
demonstrated a growth rate between 15
to 24 percent each year. In 2010, organic
food sales grew 7.7%.4
In addition, USDA has 94 accredited
certifying agents who provide
certification services to producers and
handlers. A complete list of names and
addresses of accredited certifying agents
may be found on the AMS NOP Web
site, at https://www.ams.usda.gov/nop.
AMS believes that most of these
accredited certifying agents would be
considered small entities under the
criteria established by the SBA.
srobinson on DSK4SPTVN1PROD with RULES
D. Paperwork Reduction Act
No additional collection or
recordkeeping requirements are
imposed on the public by this final rule.
Accordingly, OMB clearance is not
required by § 350(h) of the Paperwork
Reduction Act of 1995, 44 U.S.C. 3501,
et seq., or OMB’s implementing
regulations at 5 CFR part 1320.
E. Comments Received on Proposed
Rule AMS–TM–07–0136
AMS received nine comments on
proposed rule AMS–TM–07–0136.
Comments were received from an
organic producer, trade associations,
handlers, and private citizens. Most
comments expressed positions in
support of the 12 substances considered
under this sunset review. One
individual did not refer to subjects
within the scope of this rulemaking.
Some commenters specifically
supported substances that they promote,
represent, or rely on. A comment
submitted in support of Ferric
phosphate emphasized the importance
of the substance to reduce snail damage
on organic crops. A comment received
on Hydrogen chloride voiced that there
are no good alternatives to the use of the
substance for removal of residual lint
from ginned cottonseed, a process
necessary to facilitate mechanical
planting. A comment received on Egg
white lysozyme stated that the
substance is essential for organic wine
production. A comment submitted in
support of L-Malic acid underscored
that no alternatives exist for this
substance and stated its importance as
a processing aid for pH adjustment in
organic products. Multiple comments
received on Microorganisms
emphasized the critical need for
microorganisms in organic food
processing for production of dairy,
bread, fruit, vegetable, and meat
products. Comments received in
4 Organic Trade Association’s 2011 Organic
Industry Survey, https://www.ota.com.
VerDate Mar<15>2010
16:09 Aug 02, 2011
Jkt 223001
support of the allowance for Activated
charcoal confirmed the necessity of this
substance as a filtering aid in organic
processing. Comments submitted
supporting the allowance for the
substances Cyclohexylamine,
Diethylaminoethanol, and
Octadecylamine, all boiler water
additives, stated that these substances
are important for packaging
sterilization. Comments supporting the
use of Peracetic acid/Peroxyacetic acid
for sanitizing food contact surfaces
indicated that there are no alternative
materials with equivalent functionality.
One comment submitted in support of
Sodium acid pyrophosphate stated that
without the allowance for this substance
as a leavening agent, many organic
baked goods would no longer be
available because a satisfactory
alternative does not exist. The same
commenter also emphasized the
necessity of Tetrasodium pyrophosphate
in the manufacturing of meat analog
products to facilitate proper flow in the
extrusion process and ensure the
development of suitable product
texture. Overall, at least one comment
was received in favor of renewal for all
12 substances considered under this
sunset review.
Changes Requested But Not Made
One commenter opposed the
continued use of six of the 12
substances: Cyclohexylamine,
Diethylaminoethanol, Octadecylamine,
Peracetic acid/Peroxyacetic acid,
Sodium acid pyrophosphate, and
Tetrasodium pyrophosphate. The
commenter based their objection on the
safety of the substances as described in
the material safety data sheets (MSDS)
for each substance and recommended
removal of these substances from the
National List. However, the NOSB
reviewed these substances against the
evaluation criteria in 7 U.S.C. 6517 and
6518 of the OFPA, and found that when
these substances are used as limited by
the annotations for each substance, they
do not pose any danger to the
environment or to manufacturing
personnel or consumers. The NOSB
concluded that these substances remain
essential to organic production since no
organic alternatives exist and
recommended that the exemption for
these substances on the National List
continue. The NOP concurs with the
NOSB’s evaluation and
recommendation of these substances
and, therefore, does not find that
sufficient information was provided by
the commenter to justify the removal of
these substances from the National List.
PO 00000
Frm 00003
Fmt 4700
Sfmt 4700
46597
F. Effective Date
This final rule reflects
recommendations submitted to the
Secretary by the NOSB for the purpose
of fulfilling the requirements of 7 U.S.C.
6517(e) of the OFPA. Section 7 U.S.C.
6517(e) requires the NOSB to review
each substance on the National List
within 5 years of its publication. The
substances being reauthorized for use on
the National List were initially
authorized for use in organic agriculture
on September 12, 2006. Because these
substances are critical to organic
production and handling operations,
producers and handlers should be able
to continue to use these substances for
a full 5-year period beyond their
expiration date of September 12, 2011.
Accordingly, pursuant to 5 U.S.C.
553, it is found and determined that
good cause exists for not postponing the
effective date of this rule until 30 days
after publication in the Federal
Register. This rule shall be effective on
September 12, 2011.
List of Subjects in 7 CFR Part 205
Administrative practice and
procedure, Agriculture, Animals,
Archives and records, Imports, Labeling,
Organically produced products, Plants,
Reporting and recordkeeping
requirements, Seals and insignia, Soil
conservation.
The authority citation for 7 CFR part
205 continues to read as follows:
Authority: 7 U.S.C. 6501–6522.
Dated: July 28, 2011.
David R. Shipman,
Acting Administrator, Agricultural Marketing
Service.
[FR Doc. 2011–19659 Filed 8–2–11; 8:45 am]
BILLING CODE 3410–02–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2010–1307; Directorate
Identifier 2010–NM–049–AD; Amendment
39–16671; AD 2011–09–09]
RIN 2120–AA64
Airworthiness Directives; Bombardier,
Inc. Model CL–600–2A12 (CL–601) and
CL–600–2B16 (CL–601–3A, CL–601–
3R, and CL–604 Variants) Airplanes
Correction
In rule document 2011–17402
appearing on page 41653–41657, in the
issue of Friday, July 15, 2011, make the
following correction:
E:\FR\FM\03AUR1.SGM
03AUR1
46598
Federal Register / Vol. 76, No. 149 / Wednesday, August 3, 2011 / Rules and Regulations
39—AIRWORTHINESS DIRECTIVES
§ 39.13
[Corrected]
On page 41655, in the second table,
Table 2—Initial Compliance Times for
Airworthiness Limitations Tasks, a
fourth column title was inadvertently
printed above the words ‘‘Within 240
Flight hours after the effective date of
this AD.’’ The table should appear as set
forth below.
TABLE 2—INITIAL COMPLIANCE TIMES FOR AIRWORTHINESS LIMITATIONS TASKS
Bombardier, Inc. model—
Task(s)—
Initial compliance time (whichever occurs later)—
CL–600–2A12 (CL–601) airplanes,
serial numbers 3001 through
3066 inclusive; and CL–600–
2B16 (CL–601–3A and CL–601–
3R Variants) airplanes, serial
numbers 5001 through 5194 inclusive; on which Bombardier
Service Bulletin 601–0590 has
been accomplished.
CL–600–2A12 (CL–601) airplanes,
serial numbers 3001 through
3066 inclusive; and CL–600–
2B16 (CL–601–3A and CL–601–
3R Variants) airplanes, serial
numbers 5001 through 5194 inclusive; on which Bombardier
Service Bulletin 601–0590 has
been accomplished.
CL–600–2B16 (CL–604 Variants)
airplanes, serial numbers 5301
through 5665 inclusive.
30–11–00–101, Wing Anti-icing ...
CL–600–2B16 (CL–604 Variants)
airplanes, serial numbers 5701
and subsequent.
30–11–00–101, Detailed Inspection of the Wing Anti-Ice Duct
Piccolo-Tube, and 36–21–00–
101, Functional Test of the
Leading Edge Thermal Switches.
Prior to the accumulation of 4,800
total flight hours; or within
4,800 flight hours after accomplishing Task 30–11–06–204 in
Section 5–20–15 of the applicable Time Limits/Maintenance
Checks manual specified in
table 1 of this AD; whichever
occurs later.
Prior to the accumulation of 4,800
total flight hours; or within
4,800 flight hours after accomplishing Task 30–13–00–205 in
Section 5–20–15 of the applicable Time Limits/Maintenance
Checks manual specified in
table 1 of this AD; whichever
occurs later.
Prior to the accumulation of 6,400
total flight hours; except for airplanes having 6,400 total flight
hours or more as of the effective date of this AD on which
the task has not been accomplished: prior to the next scheduled 6,400 flight hour task inspection or prior to the next
scheduled accomplishment of
Task 57–10–00–208 in the applicable Time Limits/Maintenance Checks manual specified
in table 1 of this AD, whichever
occurs first.
Prior to the accumulation of 6,400
total flight hours.
30–11–00–102, Wing Anti-icing ...
30–11–00–101, Detailed Inspection of the Wing Anti-Ice Duct
Piccolo-Tube, and 36–21–00–
101, Functional Test of the
Leading Edge Thermal Switches.
[FR Doc. C1–2011–17402 Filed 7–28–11; 8:45 am]
BILLING CODE 1505–01–D
CONSUMER PRODUCT SAFETY
COMMISSION
16 CFR Chapter II
srobinson on DSK4SPTVN1PROD with RULES
[CPSC Docket No. CPSC–2011–0050]
Third Party Testing for Certain
Children’s Products; Toys:
Requirements for Accreditation of
Third Party Conformity Assessment
Bodies
Consumer Product Safety
Commission.
ACTION: Notice of requirements.
AGENCY:
VerDate Mar<15>2010
16:09 Aug 02, 2011
Jkt 223001
The Consumer Product Safety
Commission (‘‘CPSC,’’ ‘‘Commission,’’
or ‘‘we’’) is issuing a notice of
requirements that provides the criteria
and process for Commission acceptance
of accreditation of third party
conformity assessment bodies for
testing, pursuant to ASTM
International’s (formerly the American
Society for Testing and Materials)
(‘‘ASTM’’) Standard Consumer Safety
Specification for Toy Safety, F 963–08
(‘‘ASTM F 963–08’’), and section 4.27
(toy chests) from ASTM International’s
F 963–07e1 version of the standard
(‘‘ASTM F 963–07e1’’), which are the
consumer product safety standards for
toys, pursuant to section 106 of the
Consumer Product Safety Improvement
Act of 2008 (CPSIA), Public Law 110–
314. The Commission is issuing this
SUMMARY:
PO 00000
Frm 00004
Fmt 4700
Sfmt 4700
Within 240 flight hours after the
effective date of this AD.
Within 240 flight hours after the
effective date of this AD.
Within 320 flight hours after the
effective date of this AD.
Within 320 flight hours after the
effective date of this AD.
notice of requirements pursuant to
section 14(a)(3)(B)(vi) of the Consumer
Product Safety Act (CPSA).
DATES: Effective Date: The requirements
for accreditation of third party
conformity assessment bodies to assess
conformity with ASTM F 963–08 and/
or section 4.27 of ASTM F 963–07e1 are
effective August 3, 2011.1
Comments in response to this notice
of requirements should be submitted by
September 2, 2011. Comments on this
notice should be captioned ‘‘Third party
Testing for Certain Children’s Products;
Toys: Requirements for Accreditation of
1 The Commission voted 5–0 to publish this
notice of requirements. Chairman Inez M.
Tenenbaum, Commissioner Nancy A. Nord, and
Commissioner Robert S. Adler each issued a
statement, and the statements can be found at
https://www.cpsc.gov/pr/statements.html.
E:\FR\FM\03AUR1.SGM
03AUR1
]]>Agencies
[Federal Register Volume 76, Number 149 (Wednesday, August 3, 2011)]
[Rules and Regulations]
[Pages 46597-46598]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: C1-2011-17402]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2010-1307; Directorate Identifier 2010-NM-049-AD;
Amendment 39-16671; AD 2011-09-09]
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc. Model CL-600-2A12 (CL-
601) and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants)
Airplanes
Correction
In rule document 2011-17402 appearing on page 41653-41657, in the
issue of Friday, July 15, 2011, make the following correction:
[[Page 46598]]
39--AIRWORTHINESS DIRECTIVES
Sec. 39.13 [Corrected]
On page 41655, in the second table, Table 2--Initial Compliance
Times for Airworthiness Limitations Tasks, a fourth column title was
inadvertently printed above the words ``Within 240 Flight hours after
the effective date of this AD.'' The table should appear as set forth
below.
Table 2--Initial Compliance Times for Airworthiness Limitations Tasks
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
Bombardier, Inc. model-- Task(s)-- Initial compliance time (whichever occurs later)--
----------------------------------------------------------------------------------------------------------------
CL-600-2A12 (CL-601) airplanes, 30-11-00-101, Wing Anti- Prior to the Within 240 flight hours
serial numbers 3001 through 3066 icing. accumulation of 4,800 after the effective
inclusive; and CL-600-2B16 (CL- total flight hours; or date of this AD.
601-3A and CL-601-3R Variants) within 4,800 flight
airplanes, serial numbers 5001 hours after
through 5194 inclusive; on which accomplishing Task 30-
Bombardier Service Bulletin 601- 11-06-204 in Section 5-
0590 has been accomplished. 20-15 of the applicable
Time Limits/Maintenance
Checks manual specified
in table 1 of this AD;
whichever occurs later.
CL-600-2A12 (CL-601) airplanes, 30-11-00-102, Wing Anti- Prior to the Within 240 flight hours
serial numbers 3001 through 3066 icing. accumulation of 4,800 after the effective
inclusive; and CL-600-2B16 (CL- total flight hours; or date of this AD.
601-3A and CL-601-3R Variants) within 4,800 flight
airplanes, serial numbers 5001 hours after
through 5194 inclusive; on which accomplishing Task 30-
Bombardier Service Bulletin 601- 13-00-205 in Section 5-
0590 has been accomplished. 20-15 of the applicable
Time Limits/Maintenance
Checks manual specified
in table 1 of this AD;
whichever occurs later.
CL-600-2B16 (CL-604 Variants) 30-11-00-101, Detailed Prior to the Within 320 flight hours
airplanes, serial numbers 5301 Inspection of the Wing accumulation of 6,400 after the effective
through 5665 inclusive. Anti-Ice Duct Piccolo- total flight hours; date of this AD.
Tube, and 36-21-00-101, except for airplanes
Functional Test of the having 6,400 total
Leading Edge Thermal flight hours or more as
Switches. of the effective date
of this AD on which the
task has not been
accomplished: prior to
the next scheduled
6,400 flight hour task
inspection or prior to
the next scheduled
accomplishment of Task
57-10-00-208 in the
applicable Time Limits/
Maintenance Checks
manual specified in
table 1 of this AD,
whichever occurs first.
CL-600-2B16 (CL-604 Variants) 30-11-00-101, Detailed Prior to the Within 320 flight hours
airplanes, serial numbers 5701 Inspection of the Wing accumulation of 6,400 after the effective
and subsequent. Anti-Ice Duct Piccolo- total flight hours. date of this AD.
Tube, and 36-21-00-101,
Functional Test of the
Leading Edge Thermal
Switches.
----------------------------------------------------------------------------------------------------------------
[FR Doc. C1-2011-17402 Filed 7-28-11; 8:45 am]
BILLING CODE 1505-01-D
