Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 43653 [2011-18328]
Download as PDF
<![CDATA[
Federal Register / Vol. 76, No. 140 / Thursday, July 21, 2011 / Notices
Notice and opportunity for
public comment.
ACTION:
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for
Determination of Eligibility To Apply
for Trade Adjustment Assistance
Economic Development
Administration, Department of
Commerce.
AGENCY:
Pursuant to Section 251 of the Trade
Act of 1974, as amended (19 U.S.C. 2341
et seq.), the Economic Development
Administration (EDA) has received
petitions for certification of eligibility to
apply for Trade Adjustment Assistance
from the firms listed below.
43653
Accordingly, EDA has initiated
investigations to determine whether
increased imports into the United States
of articles like or directly competitive
with those produced by each of these
firms contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT
ASSISTANCE 6/23/2011 THROUGH 7/14/2011
Date
accepted for
investigation
Firm name
Address
Apex Industries, Inc. .................
3808 North Sullivan Road,
Building 14, PO Box 15288,
Spokane Valley, WA 99215.
350 Commerce Drive, Rochester, NY 14623.
07/11/2011
Genesis Metal Corporation .......
8255 Highway 16, Beggs, OK
74421–2892.
07/13/2011
Herbalix Restoratives, LLC .......
PO Box 65346, Port Ludlow,
WA 98365.
07/13/2011
J.K. Adams Company, Inc. .......
1430 Route 30, Dorset, VT
05251.
07/11/2011
J.M. McConkey & Co., Inc. .......
1615 Puyallup Street, PO Box
1690, Sumner, WA 98390.
07/11/2011
Dynalab Corp. ...........................
wreier-aviles on DSKDVH8Z91PROD with NOTICES
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
7106, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the requirements set
forth in EDA’s regulations at 13 CFR
315.9 for procedures to request a public
hearing. The Catalog of Federal
Domestic Assistance official number
and title for the program under which
these petitions are submitted is 11.313,
Trade Adjustment Assistance for Firms.
Dated: July 14, 2011.
Sunni Massey,
Eligibility Certifier.
[FR Doc. 2011–18328 Filed 7–20–11; 8:45 am]
BILLING CODE 3510–WH–P
VerDate Mar<15>2010
15:00 Jul 20, 2011
Jkt 223001
07/13/2011
Products
The firm manufactures computer enclosure parts using mainly
cold-rolled steel, stainless steel and aluminum. It is a sheet
metal fabrication and paint/powder coating company.
The firm is a master distributor that sells plastic laboratory
supplies and equipment to the scientific, education and industrial markets.
The firm is a welding and fabrication company specializing in
custom manufacturing of heat exchanger boilers, direct fired
heaters, economizers and waste heat recovery.
The firm manufactures natural body care products by distilling,
heating, blending and forming all ingredients such as herbal
essences, glycerin, and beeswax.
The firm is a secondary processor for hardwood lumber and
manufactures over 100 proprietary products. Kiln dried
planks are formed into panels to be molded, shaped and
routed.
The firm uses recycled polypropylene, PET, and styrene to
create both injection molded and thermoformed containers
and trays.
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1771]
Grant of Authority; Establishment of a
Foreign-Trade Zone Under the
Alternative Site Framework,
Terrebonne Parish, LA
Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as
amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the
following Order:
Whereas, the Foreign-Trade Zones Act
provides for ‘‘* * * the establishment
* * * of foreign-trade zones in ports of
entry of the United States, to expedite
and encourage foreign commerce, and
for other purposes,’’ and authorizes the
Foreign-Trade Zones Board to grant to
qualified corporations the privilege of
establishing foreign-trade zones in or
adjacent to U.S. Customs and Border
Protection ports of entry;
Whereas, the Board adopted the
alternative site framework (ASF) in
December 2008 (74 FR 1170–1173,
01/12/2009 (correction 74 FR 3987,
01/22/2009); 75 FR 71069–71070,
11/22/2010) as an option for the
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
establishment or reorganization of
general-purpose zones;
Whereas, the Houma-Terrebonne
Airport Commission (the Grantee) has
made application to the Board (FTZ
Docket 69–2010, filed 12/6/2010)
requesting the establishment of a
foreign-trade zone under the ASF with
a service area of Terrebonne Parish,
Louisiana, adjacent to the Morgan City
Customs and Border Protection port of
entry, and proposed Sites 1 and 2 would
be categorized as magnet sites;
Whereas, notice inviting public
comment has been given in the Federal
Register (75 FR 77614–77615, 12/13/
2010) and the application has been
processed pursuant to the FTZ Act and
the Board’s regulations; and,
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and
Board’s regulations are satisfied, and
that the proposal is in the public
interest;
Now, therefore, the Board hereby
grants to the Grantee the privilege of
establishing a foreign-trade zone,
designated on the records as ForeignTrade Zone No. 279, as described in the
E:\FR\FM\21JYN1.SGM
21JYN1
]]>Agencies
[Federal Register Volume 76, Number 140 (Thursday, July 21, 2011)]
[Notices]
[Page 43653]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-18328]
[[Page 43653]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for Determination of Eligibility To
Apply for Trade Adjustment Assistance
AGENCY: Economic Development Administration, Department of Commerce.
ACTION: Notice and opportunity for public comment.
-----------------------------------------------------------------------
Pursuant to Section 251 of the Trade Act of 1974, as amended (19
U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has
received petitions for certification of eligibility to apply for Trade
Adjustment Assistance from the firms listed below. Accordingly, EDA has
initiated investigations to determine whether increased imports into
the United States of articles like or directly competitive with those
produced by each of these firms contributed importantly to the total or
partial separation of the firm's workers, or threat thereof, and to a
decrease in sales or production of each petitioning firm.
List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment Assistance 6/23/
2011 Through 7/14/2011
----------------------------------------------------------------------------------------------------------------
Date
Firm name Address accepted for Products
investigation
----------------------------------------------------------------------------------------------------------------
Apex Industries, Inc.......... 3808 North Sullivan 07/11/2011 The firm manufactures computer enclosure
Road, Building 14, PO parts using mainly cold-rolled steel,
Box 15288, Spokane stainless steel and aluminum. It is a
Valley, WA 99215. sheet metal fabrication and paint/powder
coating company.
Dynalab Corp.................. 350 Commerce Drive, 07/13/2011 The firm is a master distributor that
Rochester, NY 14623. sells plastic laboratory supplies and
equipment to the scientific, education
and industrial markets.
Genesis Metal Corporation..... 8255 Highway 16, 07/13/2011 The firm is a welding and fabrication
Beggs, OK 74421-2892. company specializing in custom
manufacturing of heat exchanger boilers,
direct fired heaters, economizers and
waste heat recovery.
Herbalix Restoratives, LLC.... PO Box 65346, Port 07/13/2011 The firm manufactures natural body care
Ludlow, WA 98365. products by distilling, heating,
blending and forming all ingredients
such as herbal essences, glycerin, and
beeswax.
J.K. Adams Company, Inc....... 1430 Route 30, Dorset, 07/11/2011 The firm is a secondary processor for
VT 05251. hardwood lumber and manufactures over
100 proprietary products. Kiln dried
planks are formed into panels to be
molded, shaped and routed.
J.M. McConkey & Co., Inc...... 1615 Puyallup Street, 07/11/2011 The firm uses recycled polypropylene,
PO Box 1690, Sumner, PET, and styrene to create both
WA 98390. injection molded and thermoformed
containers and trays.
----------------------------------------------------------------------------------------------------------------
Any party having a substantial interest in these proceedings may
request a public hearing on the matter. A written request for a hearing
must be submitted to the Trade Adjustment Assistance for Firms
Division, Room 7106, Economic Development Administration, U.S.
Department of Commerce, Washington, DC 20230, no later than ten (10)
calendar days following publication of this notice.
Please follow the requirements set forth in EDA's regulations at 13
CFR 315.9 for procedures to request a public hearing. The Catalog of
Federal Domestic Assistance official number and title for the program
under which these petitions are submitted is 11.313, Trade Adjustment
Assistance for Firms.
Dated: July 14, 2011.
Sunni Massey,
Eligibility Certifier.
[FR Doc. 2011-18328 Filed 7-20-11; 8:45 am]
BILLING CODE 3510-WH-P
