Delegation of National Emission Standards for Hazardous Air Pollutants for Source Categories; State of Arizona, Maricopa County Air Quality Department; State of California, Santa Barbara County Air Pollution Control District, 14807-14812 [2011-6425]
Download as PDF
<![CDATA[
WReier-Aviles on DSKGBLS3C1PROD with RULES
Federal Register / Vol. 76, No. 53 / Friday, March 18, 2011 / Rules and Regulations
of Management and Budget under
Executive Order 12866 (58 FR 51735,
October 4, 1993);
• Do not impose an information
collection burden under the provisions
of the Paperwork Reduction Act (44
U.S.C. 3501 et seq.);
• Are certified as not having a
significant economic impact on a
substantial number of small entities
under the Regulatory Flexibility Act
(5 U.S.C. 601 et seq.);
• Do not contain any unfunded
mandate or significantly or uniquely
affect small governments, as described
in the Unfunded Mandates Reform Act
of 1995 (Pub. L. 104–4);
• Do not have Federalism
implications as specified in Executive
Order 13132 (64 FR 43255, August 10,
1999);
• Are not economically significant
regulatory actions based on health or
safety risks subject to Executive Order
13045 (62 FR 19885, April 23, 1997);
• Are not significant regulatory
actions subject to Executive Order
13211 (66 FR 28355, May 22, 2001);
• Are not subject to requirements of
Section 12(d) of the National
Technology Transfer and Advancement
Act of 1995 (15 U.S.C. 272 note) because
application of those requirements would
be inconsistent with the Clean Air Act;
and
• Do not provide EPA with the
discretionary authority to address, as
appropriate, disproportionate human
health or environmental effects, using
practicable and legally permissible
methods, under Executive Order 12898
(59 FR 7629, February 16, 1994).
In addition, these actions do not have
tribal implications as specified by
Executive Order 13175 (65 FR 67249,
November 9, 2000), because the SIP is
not approved to apply in Indian country
located in the state, and EPA notes that
it will not impose substantial direct
costs on tribal governments or preempt
tribal law.
The Congressional Review Act, 5
U.S.C. 801 et seq., as added by the Small
Business Regulatory Enforcement
Fairness Act of 1996, generally provides
that before a rule may take effect, the
agency promulgating the rule must
submit a rule report, which includes a
copy of the rule, to each House of the
Congress and to the Comptroller General
of the United States. EPA will submit a
report containing these actions and
other required information to the U.S.
Senate, the U.S. House of
Representatives, and the Comptroller
General of the United States prior to
publication of the rule in the Federal
Register. A major rule cannot take effect
VerDate Mar<15>2010
13:29 Mar 17, 2011
Jkt 223001
until 60 days after it is published in the
Federal Register. This action is not a
‘‘major rule’’ as defined by 5 U.S.C.
804(2).
Under section 307(b)(1) of the Clean
Air Act, petitions for judicial review of
this action must be filed in the United
States Court of Appeals for the
appropriate circuit by May 17, 2011.
Filing a petition for reconsideration by
the Administrator of this final rule does
not affect the finality of this action for
the purposes of judicial review nor does
it extend the time within which a
petition for judicial review may be filed,
and shall not postpone the effectiveness
of such rule or action. This action may
not be challenged later in proceedings to
enforce its requirements. (See section
307(b)(2).)
List of Subjects in 40 CFR Part 52
Environmental protection, Air
pollution control, Incorporation by
reference, Intergovernmental relations,
Nitrogen dioxide, Ozone, Reporting and
recordkeeping requirements, Volatile
organic compounds.
Dated: March 8, 2011.
H. Curtis Spalding,
Regional Administrator, EPA New England.
Part 52 of chapter I, title 40 of the
Code of Federal Regulations is amended
as follows:
PART 52—[AMENDED]
1. The authority citation for part 52
continues to read as follows:
■
Authority: 42 U.S.C. 7401 et seq.
Subpart EE—New Hampshire
2. Section 52.1534 is amended by
adding paragraph (e) to read as follows:
■
§ 52.1534
Control strategy: Ozone.
*
*
*
*
*
(e) Determination of Attainment.
Effective April 18, 2011, EPA is
determining that the BostonManchester-Portsmouth (SE), New
Hampshire 8-hour ozone nonattainment
area has attained the 1997 8-hour ozone
standard based on 2007–2009
monitoring data. Under the provisions
of EPA’s ozone implementation rule (see
40 CFR 51.918), this determination
suspends the reasonable further
progress and attainment demonstration
requirements of section 182(b)(1) and
related requirements of section 172(c)(9)
of the Clean Air Act for as long as the
area does not monitor any violations of
the 1997 8-hour ozone standard. If a
violation of the 1997 ozone NAAQS is
monitored in the Boston-ManchesterPortsmouth (SE), New Hampshire 8-
PO 00000
Frm 00031
Fmt 4700
Sfmt 4700
14807
hour ozone nonattainment area, this
determination shall no longer apply. In
addition, this area met its June 15, 2010
attainment deadline for the 1997 ozone
standard.
[FR Doc. 2011–6306 Filed 3–17–11; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 63
[EPA–R09–OAR–2011–0213; FRL–9283–4]
Delegation of National Emission
Standards for Hazardous Air Pollutants
for Source Categories; State of
Arizona, Maricopa County Air Quality
Department; State of California, Santa
Barbara County Air Pollution Control
District
Environmental Protection
Agency (EPA).
ACTION: Direct final rule.
AGENCY:
EPA is amending certain
regulations to reflect the current
delegation status of national emission
standards for hazardous air pollutants
(NESHAP) in Arizona and California.
Several NESHAP were delegated to the
Maricopa County Air Quality
Department and the Santa Barbara
County Air Pollution Control District
within the past 12 months. The purpose
of this action is to update the listing in
the Code of Federal Regulations.
DATES: This rule is effective on May 17,
2011 without further notice, unless EPA
receives adverse comments by April 18,
2011. If we receive such comments, we
will publish a timely withdrawal in the
Federal Register to notify the public
that this direct final rule will not take
effect.
ADDRESSES: Submit comments,
identified by docket number EPA–R09–
OAR–2011–0213, by one of the
following methods:
1. Federal eRulemaking Portal:
https://www.regulations.gov. Follow the
on-line instructions.
2. E-mail: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel
(AIR–4), U.S. Environmental Protection
Agency Region IX, 75 Hawthorne Street,
San Francisco, CA 94105–3901.
Instructions: All comments will be
included in the public docket without
change and may be made available
online at https://www.regulations.gov,
including any personal information
provided, unless the comment includes
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Information that
SUMMARY:
E:\FR\FM\18MRR1.SGM
18MRR1
14808
Federal Register / Vol. 76, No. 53 / Friday, March 18, 2011 / Rules and Regulations
you consider CBI or otherwise protected
should be clearly identified as such and
should not be submitted through
https://www.regulations.gov or e-mail.
https://www.regulations.gov is an
‘‘anonymous access’’ system, and EPA
will not know your identity or contact
information unless you provide it in the
body of your comment. If you send email directly to EPA, your e-mail
address will be automatically captured
and included as part of the public
comment. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: The index to the docket for
this action is available electronically at
https://www.regulations.gov and in hard
copy at EPA Region IX, 75 Hawthorne
Street, San Francisco, California. While
all documents in the docket are listed in
the index, some information may be
publicly available only at the hard copy
location (e.g., copyrighted material), and
some may not be publicly available in
either location (e.g., CBI). To inspect the
hard copy materials, please schedule an
appointment during normal business
hours with the contact listed in the FOR
FURTHER INFORMATION CONTACT section.
FOR FURTHER INFORMATION CONTACT: Mae
Wang, EPA Region IX, (415) 947–4124,
wang.mae@epa.gov.
SUPPLEMENTARY INFORMATION:
Throughout this document, ‘‘we,’’ ‘‘us’’
and ‘‘our’’ refer to EPA.
Table of Contents
I. Background
A. Delegation of NESHAP
B. Maricopa County Delegations
C. Santa Barbara County Delegations
II. EPA Action
A. Maricopa County
B. Santa Barbara County
III. Statutory and Executive Order Reviews
WReier-Aviles on DSKGBLS3C1PROD with RULES
I. Background
A. Delegation of NESHAP
Section 112(l) of the Clean Air Act, as
amended in 1990 (CAA), authorizes
EPA to delegate to State or local air
pollution control agencies the authority
to implement and enforce the standards
set out in the Code of Federal
Regulations, Title 40 (40 CFR), Part 63,
National Emission Standards for
Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA
promulgated regulations, codified at 40
CFR Part 63, Subpart E (hereinafter
referred to as ‘‘Subpart E’’), establishing
procedures for EPA’s approval of State
rules or programs under section 112(l)
VerDate Mar<15>2010
13:29 Mar 17, 2011
Jkt 223001
(see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65
FR 55810).
Any request for approval under CAA
section 112(l) must meet the approval
criteria in 112(l)(5) and Subpart E. To
streamline the approval process for
future applications, a State or local
agency may submit a one-time
demonstration that it has adequate
authorities and resources to implement
and enforce any CAA section 112
standards. If such demonstration is
approved, then the State or local agency
would no longer need to resubmit a
demonstration of these same authorities
and resources for every subsequent
request for delegation of CAA section
112 standards. However, EPA maintains
the authority to withdraw its approval if
the State does not adequately
implement or enforce an approved rule
or program.
B. Maricopa County Delegations
On March 2, 2000, EPA published a
direct final action delegating to the
Maricopa County Air Quality
Department (Maricopa County) several
NESHAP and approving Maricopa
County’s delegation mechanism for
future standards (see 65 FR 11231). That
action explained the procedure for EPA
to grant future delegations to Maricopa
County by letter, with periodic Federal
Register listings of standards that have
been delegated. On March 5, 2010, and
April 5, 2010, Maricopa County
requested delegation of the following
NESHAP contained in 40 CFR Part 63:
• Subpart WWWWW—National
Emission Standards for Hospital
Ethylene Oxide Sterilizers
• Subpart YYYYY—NESHAP for Area
Sources: Electric Arc Furnace
Steelmaking Facilities
• Subpart ZZZZZ—NESHAP for Iron
and Steel Foundries Area Sources
• Subpart BBBBBB—NESHAP for
Source Category: Gasoline
Distribution Bulk Terminals, Bulk
Plants, and Pipeline Facilities
• Subpart CCCCCC—NESHAP for
Source Category: Gasoline Dispensing
Facilities
• Subpart DDDDDD—NESHAP for
Polyvinyl Chloride and Copolymers
Production Area Sources
• Subpart EEEEEE—NESHAP for
Primary Copper Smelting Area
Sources
• Subpart FFFFFF—NESHAP for
Secondary Copper Smelting Area
Sources
• Subpart GGGGGG—NESHAP for
Primary Nonferrous Metals Area
Sources—Zinc, Cadmium, and
Beryllium
PO 00000
Frm 00032
Fmt 4700
Sfmt 4700
• Subpart HHHHHH—NESHAP: Paint
Stripping and Miscellaneous Surface
Coating Operations at Area Sources
• Subpart LLLLLL—NESHAP for
Acrylic and Modacrylic Fibers
Production Area Sources
• Subpart MMMMMM—NESHAP for
Carbon Black Production Area
Sources
• Subpart NNNNNN—NESHAP for
Chemical Manufacturing Area
Sources: Chromium Compounds
• Subpart OOOOOO—NESHAP for
Flexible Polyurethane Foam
Production and Fabrication Area
Sources
• Subpart PPPPPP—NESHAP for Lead
Acid Battery Manufacturing Area
Sources
• Subpart QQQQQQ—NESHAP for
Wood Preserving Area Sources
• Subpart RRRRRR—NESHAP for Clay
Ceramics Manufacturing Area Sources
• Subpart SSSSSS—NESHAP for Glass
Manufacturing Area Sources
• Subpart TTTTTT—NESHAP for
Secondary Nonferrous Metals
Processing Area Sources
On May 6, 2010, EPA granted
delegation to Maricopa County for these
NESHAP, along with any amendments
to previously-delegated NESHAP, as of
July 1, 2008. Subsequently, on October
7, 2010, Maricopa County requested
delegation of the following NESHAP
contained in 40 CFR Part 63:
• Subpart WWWWWW—NESHAP:
Area Source Standards for Plating and
Polishing Operations
• Subpart XXXXXX—NESHAP Area
Source Standards for Nine Metal
Fabrication and Finishing Source
Categories
• Subpart YYYYYY—NESHAP for Area
Sources: Ferroalloys Production
Facilities
• Subpart ZZZZZZ—NESHAP: Area
Source Standards for Aluminum,
Copper, and Other Nonferrous
Foundries
On December 14, 2010, EPA granted
delegation to Maricopa County for these
NESHAP, along with any amendments
to previously-delegated NESHAP, as of
July 1, 2009. Today’s action is serving
to notify the public of the May 6, 2010,
and December 14, 2010, delegations and
to codify these delegations into the Code
of Federal Regulations.
C. Santa Barbara County Delegations
On October 6, 2003, the California Air
Resources Board (CARB) submitted on
behalf of nine California districts a
request for delegation of all Federal
section 112 standards that apply to area
sources, with the exception of the dry
cleaning and chromium electroplating
E:\FR\FM\18MRR1.SGM
18MRR1
Federal Register / Vol. 76, No. 53 / Friday, March 18, 2011 / Rules and Regulations
standards for which State or local rules
have already been approved (see 61 FR
25397 and 64 FR 12762). This request
was approved on December 19, 2003
(see 68 FR 70726). In that approval, it
was explained that future requests by
other districts could be approved by
letter, followed by a Federal Register
notice to codify the delegations into the
CFR.
On April 1, 2010, the Santa Barbara
County Air Pollution Control District
(Santa Barbara County) asked CARB to
make a delegation request on their
behalf for CAA section 112 area source
standards. CARB submitted the request
on behalf of the district on May 20,
2010. On July 30, 2010, EPA Region IX
approved this request by letter, granting
the Santa Barbara County the authority
to implement and enforce existing area
source standards unchanged as
promulgated by EPA.
II. EPA Action
A. Maricopa County
Today’s document serves to notify the
public of the delegation of NESHAP to
Maricopa County on May 6, 2010, and
December 14, 2010. Today’s action will
codify these delegations into the CFR.
WReier-Aviles on DSKGBLS3C1PROD with RULES
B. Santa Barbara County
This document serves to notify the
public that, with the exception of the
dry cleaning and chromium
electroplating standards, EPA granted
delegation of unchanged Federal section
112 area source standards to Santa
Barbara County on July 30, 2010.
Today’s action will codify these
delegations into the CFR. Santa Barbara
County will also receive delegation of
any future area source standards or
revisions 90 days after promulgation of
these standards or revisions, unless the
district chooses to decline delegation of
a particular future standard by notifying
the EPA Region IX office in writing. If
no such notification is received, the
delegation will go into effect 90 days
after promulgation of the standard or
revision, without any additional action
from the district or EPA. Additionally,
as mentioned in 74 FR 12591 (March 25,
2009), and pursuant to 40 CFR sections
63.9(a)(4)(ii) and 63.10(a)(4)(ii), EPA
Region IX waives the requirement that
notifications or reports for delegated
area source standards be submitted to
EPA as well as Santa Barbara County.
III. Statutory and Executive Order
Reviews
Under the CAA, the Administrator is
required to approve delegation requests
that comply with the provisions of the
CAA and applicable Federal regulations.
VerDate Mar<15>2010
13:29 Mar 17, 2011
Jkt 223001
42 U.S.C. 7412(l); 40 CFR 63.91(b).
Thus, in reviewing delegation
submissions, EPA’s role is to approve
State choices, provided that they meet
the criteria of the CAA. Accordingly,
this action merely approves State law as
meeting Federal requirements and does
not impose additional requirements
beyond those imposed by State law. For
that reason, this action:
• Is not a ‘‘significant regulatory
action’’ subject to review by the Office
of Management and Budget under
Executive Order 12866 (58 FR 51735,
October 4, 1993);
• Does not impose an information
collection burden under the provisions
of the Paperwork Reduction Act (44
U.S.C. 3501 et seq.);
• Is certified as not having a
significant economic impact on a
substantial number of small entities
under the Regulatory Flexibility Act
(5 U.S.C. 601 et seq.);
• Does not contain any unfunded
mandate or significantly or uniquely
affect small governments, as described
in the Unfunded Mandates Reform Act
of 1995 (Pub. L. 104–4);
• Does not have Federalism
implications as specified in Executive
Order 13132 (64 FR 43255, August 10,
1999);
• Is not an economically significant
regulatory action based on health or
safety risks subject to Executive Order
13045 (62 FR 19885, April 23, 1997);
• Is not a significant regulatory action
subject to Executive Order 13211 (66 FR
28355, May 22, 2001);
• Is not subject to requirements of
Section 12(d) of the National
Technology Transfer and Advancement
Act of 1995 (15 U.S.C. 272 note) because
application of those requirements would
be inconsistent with the CAA; and
• Does not provide EPA with the
discretionary authority to address
disproportionate human health or
environmental effects with practical,
appropriate, and legally permissible
methods under Executive Order 12898
(59 FR 7629, February 16, 1994).
In addition, this rule does not have
Tribal implications as specified by
Executive Order 13175 (65 FR 67249,
November 9, 2000), because the
delegations are not approved to apply in
Indian country located in the State, and
EPA notes that it will not impose
substantial direct costs on Tribal
governments or preempt Tribal law.
The Congressional Review Act,
5 U.S.C. 801 et seq., as added by the
Small Business Regulatory Enforcement
Fairness Act of 1996, generally provides
that before a rule may take effect, the
agency promulgating the rule must
submit a rule report, which includes a
PO 00000
Frm 00033
Fmt 4700
Sfmt 4700
14809
copy of the rule, to each House of the
Congress and to the Comptroller General
of the United States. EPA will submit a
report containing this action and other
required information to the U.S. Senate,
the U.S. House of Representatives, and
the Comptroller General of the United
States prior to publication of the rule in
the Federal Register. A major rule
cannot take effect until 60 days after it
is published in the Federal Register.
This action is not a ‘‘major rule’’ as
defined by 5 U.S.C. 804(2).
Under section 307(b)(1) of the CAA,
petitions for judicial review of this
action must be filed in the United States
Court of Appeals for the appropriate
circuit by May 17, 2011. Filing a
petition for reconsideration by the
Administrator of this final rule does not
affect the finality of this action for the
purposes of judicial review nor does it
extend the time within which a petition
for judicial review may be filed, and
shall not postpone the effectiveness of
such rule or action. Parties with
objections to this direct final rule are
encouraged to file a comment in
response to the parallel notice of
proposed rulemaking for this action
published in the Proposed Rules section
of today’s Federal Register, rather than
file an immediate petition for judicial
review of this direct final rule, so that
EPA can withdraw this direct final rule
and address the comment in the
proposed rulemaking. This action may
not be challenged later in proceedings to
enforce its requirements (see section
307(b)(2)).
List of Subjects in 40 CFR Part 63
Environmental protection,
Administrative practice and procedure,
Air pollution control, Hazardous
substances, Intergovernmental relations,
Reporting and recordkeeping
requirements.
Authority: This action is issued under the
authority of Section 112 of the Clean Air Act,
as amended, 42 U.S.C. 7412.
Dated: March 3, 2011.
Deborah Jordan,
Director, Air Division, Region IX.
Title 40, chapter I, part 63 of the Code
of Federal Regulations is amended as
follows:
PART 63—[AMENDED]
1. The authority citation for Part 63
continues to read as follows:
■
Authority: 42 U.S.C. 7401, et seq.
E:\FR\FM\18MRR1.SGM
18MRR1
14810
Federal Register / Vol. 76, No. 53 / Friday, March 18, 2011 / Rules and Regulations
Subpart E—Approval of State
Programs and Delegation of Federal
Authorities
2. Section 63.99 is amended as
follows:
■
a. By revising the table in paragraph
(a)(3)(i);
■ b. By revising paragraphs
(a)(5)(i)(B)(11) and (12); and
■ c. By adding paragraph (a)(5)(i)(B)(13).
■
§ 63.99
Delegated Federal authorities.
(a) * * *
(3) * * *
(i) * * *
DELEGATION STATUS FOR PART 63 STANDARDS—ARIZONA
Subpart
Description
ADEQ 1
MCAQD 2
PDEQ 3
PCAQCD 4
A .......................
F .......................
G .......................
General Provisions ...........................................................................
Synthetic Organic Chemical Manufacturing Industry .......................
Synthetic Organic Chemical Manufacturing Industry: Process
Vents, Storage Vessels, Transfer Operations, and Wastewater.
Organic Hazardous Air Pollutants: Equipment Leaks ......................
Organic Hazardous Air Pollutants: Certain Processes Subject to
the Negotiated Regulation for Equipment Leaks.
Polyvinyl Chloride and Copolymers Production ...............................
Coke Oven Batteries ........................................................................
Perchloroethylene Dry Cleaning .......................................................
Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks.
Ethylene Oxide Sterilization Facilities ..............................................
Industrial Process Cooling Towers ...................................................
Gasoline Distribution Facilities .........................................................
Pulp and Paper .................................................................................
Halogenated Solvent Cleaning .........................................................
Group I Polymers and Resins ..........................................................
Epoxy Resins Production and Non-Nylon Polyamides Production ..
Secondary Lead Smelting ................................................................
Marine Tank Vessel Loading Operations .........................................
Phosphoric Acid Manufacturing Plants .............................................
Phosphate Fertilizers Production Plants ..........................................
Petroleum Refineries ........................................................................
Off-Site Waste and Recovery Operations ........................................
Magnetic Tape Manufacturing Operations .......................................
Aerospace Manufacturing and Rework Facilities .............................
Oil and Natural Gas Production Facilities ........................................
Wood Furniture Manufacturing Operations ......................................
Printing and Publishing Industry .......................................................
Primary Aluminum Reduction Plants ................................................
Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite,
and Stand-Alone Semichemical Pulp Mills.
Tanks—Level 1 .................................................................................
Containers .........................................................................................
Surface Impoundments .....................................................................
Individual Drain Systems ..................................................................
Closed Vent Systems, Control Devices, Recovery Devices and
Routing to a Fuel Gas System or a Process.
Equipment Leaks—Control Level 1 ..................................................
Equipment Leaks—Control Level 2 ..................................................
Oil-Water Separators and Organic-Water Separators .....................
Storage Vessels (Tanks)—Control Level 2 ......................................
Ethylene Manufacturing Process Units: Heat Exchange Systems
and Waste Operations.
Generic MACT Standards ................................................................
Steel Pickling ....................................................................................
Mineral Wool Production ..................................................................
Hazardous Waste Combustors .........................................................
Pharmaceuticals Production .............................................................
Natural Gas Transmission and Storage Facilities ............................
Flexible Polyurethane Foam Production ..........................................
Group IV Polymers and Resins ........................................................
Portland Cement Manufacturing Industry .........................................
Pesticide Active Ingredient Production .............................................
Wool Fiberglass Manufacturing ........................................................
Manufacture of Amino/Phenolic Resins ...........................................
Polyether Polyols Production ............................................................
Primary Copper Smelting .................................................................
Secondary Aluminum Production .....................................................
Primary Lead Smelting .....................................................................
Petroleum Refineries: Catalytic Cracking, Catalytic Reforming, and
Sulfur Recovery Units.
Publicly Owned Treatment Works ....................................................
Ferroalloys Production ......................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
....................
....................
....................
X
X
X
X
....................
X
X
....................
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
....................
X
....................
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
....................
....................
....................
....................
....................
....................
X
....................
....................
....................
....................
....................
....................
....................
....................
....................
X
X
X
X
X
X
....................
....................
E:\FR\FM\18MRR1.SGM
18MRR1
H .......................
I .........................
J ........................
L ........................
M .......................
N .......................
O .......................
Q .......................
R .......................
S .......................
T .......................
U .......................
W ......................
X .......................
Y .......................
AA .....................
BB .....................
CC ....................
DD ....................
EE .....................
GG ....................
HH ....................
JJ ......................
KK .....................
LL ......................
MM ....................
OO ....................
PP .....................
QQ ....................
RR ....................
SS .....................
WReier-Aviles on DSKGBLS3C1PROD with RULES
TT .....................
UU ....................
VV .....................
WW ...................
XX .....................
YY .....................
CCC ..................
DDD ..................
EEE ..................
GGG .................
HHH ..................
III .......................
JJJ ....................
LLL ....................
MMM .................
NNN ..................
OOO .................
PPP ..................
QQQ .................
RRR ..................
TTT ...................
UUU ..................
VVV ..................
XXX ..................
VerDate Mar<15>2010
13:29 Mar 17, 2011
Jkt 223001
PO 00000
Frm 00034
Fmt 4700
Sfmt 4700
Federal Register / Vol. 76, No. 53 / Friday, March 18, 2011 / Rules and Regulations
14811
DELEGATION STATUS FOR PART 63 STANDARDS—ARIZONA—Continued
Subpart
Description
ADEQ 1
MCAQD 2
PDEQ 3
PCAQCD 4
AAAA ................
CCCC ...............
DDDD ...............
EEEE ................
FFFF .................
GGGG ..............
HHHH ...............
IIII ......................
JJJJ ..................
KKKK ................
MMMM ..............
NNNN ...............
OOOO ..............
PPPP ................
QQQQ ..............
RRRR ...............
SSSS ................
TTTT .................
UUUU ...............
VVVV ................
WWWW ............
XXXX ................
YYYY ................
ZZZZ .................
AAAAA ..............
BBBBB ..............
CCCCC .............
DDDDD .............
Municipal Solid Waste Landfills ........................................................
Manufacturing of Nutritional Yeast ...................................................
Plywood and Composite Wood Products .........................................
Organic Liquids Distribution (non-gasoline) .....................................
Miscellaneous Organic Chemical Manufacturing .............................
Solvent Extraction for Vegetable Oil Production ..............................
Wet-Formed Fiberglass Mat Production ...........................................
Surface Coating of Automobiles and Light-Duty Trucks ..................
Paper and Other Web Coating .........................................................
Surface Coating of Metal Cans ........................................................
Miscellaneous Metal Parts and Products .........................................
Large Appliances ..............................................................................
Printing, Coating, and Dyeing of Fabrics and Other Textiles ..........
Surface Coating of Plastic Parts and Products ................................
Wood Building Products ...................................................................
Surface Coating of Metal Furniture ..................................................
Surface Coating of Metal Coil ..........................................................
Leather Finishing Operations ...........................................................
Cellulose Products Manufacturing ....................................................
Boat Manufacturing ...........................................................................
Reinforced Plastics Composites Production ....................................
Tire Manufacturing ............................................................................
Stationary Combustion Turbines ......................................................
Stationary Reciprocating Internal Combustion Engines ...................
Lime Manufacturing Plants ...............................................................
Semiconductor Manufacturing ..........................................................
Coke Oven: Pushing, Quenching and Battery Stacks .....................
Industrial, Commercial, and Institutional Boiler and Process Heaters.
Iron and Steel Foundries ..................................................................
Integrated Iron and Steel ..................................................................
Site Remediation ..............................................................................
Miscellaneous Coating Manufacturing ..............................................
Mercury Emissions from Mercury Cell Chlor-Alkali Plants ...............
Brick and Structural Clay Products Manufacturing ..........................
Clay Ceramics Manufacturing ..........................................................
Asphalt Roofing and Processing ......................................................
Flexible Polyurethane Foam Fabrication Operation .........................
Hydrochloric Acid Production ...........................................................
Engine Test Cells/Stands .................................................................
Friction Products Manufacturing .......................................................
Taconite Iron Ore Processing ...........................................................
Refractory Products Manufacturing ..................................................
Primary Magnesium Refining ...........................................................
Hospital Ethylene Oxide Sterilizers ..................................................
Area Sources: Electric Arc Furnace Steelmaking Facilities .............
Iron and Steel Foundries Area Sources ...........................................
Gasoline Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities.
Gasoline Dispensing Facilities ..........................................................
Polyvinyl Chloride and Copolymers Production Area Sources ........
Primary Copper Smelting Area Sources ..........................................
Secondary Copper Smelting Area Sources .....................................
Primary Nonferrous Metals Area Sources—Zinc, Cadmium, and
Beryllium.
Paint Stripping and Miscellaneous Surface Coating Operations at
Area Sources.
Acrylic and Modacrylic Fibers Production Area Sources .................
Carbon Black Production Area Sources ...........................................
Chemical Manufacturing Area Sources: Chromium Compounds ....
Flexible Polyurethane Foam Production and Fabrication Area
Sources.
Lead Acid Battery Manufacturing Area Sources ..............................
Wood Preserving Area Sources .......................................................
Clay Ceramics Manufacturing Area Sources ...................................
Glass Manufacturing Area Sources ..................................................
Secondary Nonferrous Metals Processing Area Sources ................
Area Source Standards for Plating and Polishing Operations .........
Area Source Standards for Nine Metal Fabrication and Finishing
Source Categories.
Area Sources: Ferroalloys Production Facilities ..............................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
X
X
X
X
X
....................
X
X
X
X
X
X
X
X
X
....................
X
X
X
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
....................
....................
....................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
X
X
X
X
X
X
X
X
X
X
....................
....................
....................
....................
....................
....................
X
X
....................
....................
....................
....................
....................
X
X
X
X
X
X
X
X
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
X
X
X
X
X
X
X
X
X
X
X
X
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
X
....................
....................
E:\FR\FM\18MRR1.SGM
18MRR1
EEEEE ..............
FFFFF ...............
GGGGG ............
HHHHH .............
IIIII .....................
JJJJJ .................
KKKKK ..............
LLLLL ................
MMMMM ...........
NNNNN .............
PPPPP ..............
QQQQQ ............
RRRRR .............
SSSSS ..............
TTTTT ...............
WWWWW .........
YYYYY ..............
ZZZZZ ...............
BBBBBB ...........
CCCCCC ..........
DDDDDD ..........
EEEEEE ...........
FFFFFF ............
GGGGGG .........
HHHHHH ..........
WReier-Aviles on DSKGBLS3C1PROD with RULES
LLLLLL ..............
MMMMMM ........
NNNNNN ..........
OOOOOO .........
PPPPPP ...........
QQQQQQ .........
RRRRRR ..........
SSSSSS ...........
TTTTTT ............
WWWWWW .....
XXXXXX ...........
YYYYYY ...........
VerDate Mar<15>2010
13:29 Mar 17, 2011
Jkt 223001
PO 00000
Frm 00035
Fmt 4700
Sfmt 4700
14812
Federal Register / Vol. 76, No. 53 / Friday, March 18, 2011 / Rules and Regulations
DELEGATION STATUS FOR PART 63 STANDARDS—ARIZONA—Continued
Subpart
Description
ADEQ 1
MCAQD 2
PDEQ 3
PCAQCD 4
ZZZZZZ ............
Area Source Standards for Aluminum, Copper, and Other Nonferrous Foundries.
....................
X
....................
....................
1 Arizona
Department of Environmental Quality.
County Air Quality Department.
3 Pima County Department of Environmental Quality.
4 Pinal County Air Quality Control District.
2 Maricopa
(5) * * *
(i) * * *
(B) * * *
(11) Santa Barbara County Air
Pollution Control District.
(12) Ventura County Air Pollution
Control District.
(13) Yolo-Solano Air Quality
Management District.
*
*
*
*
*
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 98
[EPA–HQ–OAR–2011–0191; FRL–9283–7]
RIN 2060–AQ87
Final Regulation Extending the
Reporting Deadline for Year 2010 Data
Elements Required Under the
Mandatory Reporting of Greenhouse
Gases Rule
[FR Doc. 2011–6425 Filed 3–17–11; 8:45 am]
Environmental Protection
Agency (EPA).
ACTION: Final rule.
BILLING CODE 6560–50–P
AGENCY:
ENVIRONMENTAL PROTECTION
AGENCY
SUMMARY:
40 CFR Part 81
[EPA–HQ–OAR–2007–0562; EPA–HQ–OAR–
2010–0163; FRL–9261–3]
RIN–2060–AQ30
Additional Air Quality Designations for
the 2006 24-Hour Fine Particle National
Ambient Air Quality Standards,
110(k)(6) Correction and Technical
Correction Related to Prior
Designation, and Decisions Related to
the 1997 Air Quality Designations and
Classifications for the Annual Fine
Particles National Ambient Air Quality
Standards
Correction
In rule document 2011–2269
appearing on pages 6056–6066 in the
issue of Thursday, February 3, 2011,
make the following corrections:
§ 81.303
[Table Corrected]
1. On page 6064, in the table for
Arizona, in the last row, in the last
column labeled ‘‘Type’’, ‘‘Unclassifiable/
Attainment’’ should read ‘‘................’’.
■ 2. On page 6065, in the table for
Arizona, in the first row, in the last
column labeled ‘‘Type’’, ‘‘Unclassifiable/
Attainment’’ should read ‘‘................’’.
WReier-Aviles on DSKGBLS3C1PROD with RULES
■
[FR Doc. C1–2011–2269 Filed 3–17–11; 8:45 am]
BILLING CODE 1505–01–D
VerDate Mar<15>2010
13:29 Mar 17, 2011
Jkt 223001
EPA is promulgating this final
rule to extend until September 30, 2011
the reporting deadline for year 2010
data required under the Mandatory
Reporting of Greenhouse Gases Rule.
This deadline extension will, in the first
year of the Greenhouse Gas Reporting
Program, allow time for needed
refinement of the electronic data
reporting system, stakeholder testing of
the reporting system and feedback to
EPA, and reporter access to the
reporting system in advance of the
reporting deadline. This rule changes
only the deadline for reporting for 2011;
it does not change the reporting
deadline for future years and does not
change what data must be reported.
DATES: This final rule is effective on
March 18, 2011.
ADDRESSES: Docket: All documents in
the docket are listed in the https://
www.regulations.gov index. Although
listed in the index, some information is
not publicly available, e.g., Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available either
electronically in https://
www.regulations.gov or in hard copy at
the Air Docket, EPA/DC, EPA West
Building, Room 3334, 1301 Constitution
Ave., NW., Washington, DC. This
Docket Facility is open from 8:30 a.m.
to 4:30 p.m., Monday through Friday,
excluding Federal holidays. The
PO 00000
Frm 00036
Fmt 4700
Sfmt 4700
telephone number for the Public
Reading Room is (202) 566–1744, and
the telephone number for the Air Docket
is (202) 566–1742.
FOR FURTHER INFORMATION CONTACT:
Carole Cook, Climate Change Division,
Office of Atmospheric Programs (MC–
6207J), Environmental Protection
Agency, 1200 Pennsylvania Ave., NW.,
Washington, DC 20460; telephone
number: (202) 343–9263; fax number:
(202) 343–2342; e-mail address:
GHGReportingRule@EPA.gov.
Worldwide Web (WWW). In addition
to being available in the docket, an
electronic pre-publication copy of this
final rule will also be available through
the WWW. Following the
Administrator’s signature, a copy of this
action will be posted on EPA’s
greenhouse gas reporting rule Web site
at https://www.epa.gov/climatechange/
emissions/ghgrulemaking.html.
SUPPLEMENTARY INFORMATION: Acronyms
and Abbreviations. The following
acronyms and abbreviations are used in
this document.
APA Administrative Procedure Act
CAA Clean Air Act
CBI Confidential Business Information
CEMS continuous emission monitoring
system(s)
CFR Code of Federal Regulations
CRA Congressional Review Act
e-GGRT Electronic Greenhouse Gas
Reporting Tool
EPA U.S. Environmental Protection Agency
FR Federal Register
GHG greenhouse gas
NAICS North American Industry
Classification System
NTTAA National Technology Transfer and
Advancement Act
OMB Office of Management and Budget
RFA Regulatory Flexibility Act
UMRA Unfunded Mandates Reform Act
U.S.C. United States Code
WWW Worldwide Web
Organization of this Document. The
following outline is provided to aid in
locating information in this preamble.
I. Background
II. Summary of the Final Rule
A. Facilities Affected
B. Amendment
III. Rationale for the Final Rule
IV. Need for a Final Rule
V. Statutory and Executive Order Reviews
E:\FR\FM\18MRR1.SGM
18MRR1
]]>Agencies
[Federal Register Volume 76, Number 53 (Friday, March 18, 2011)]
[Rules and Regulations]
[Pages 14807-14812]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-6425]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 63
[EPA-R09-OAR-2011-0213; FRL-9283-4]
Delegation of National Emission Standards for Hazardous Air
Pollutants for Source Categories; State of Arizona, Maricopa County Air
Quality Department; State of California, Santa Barbara County Air
Pollution Control District
AGENCY: Environmental Protection Agency (EPA).
ACTION: Direct final rule.
-----------------------------------------------------------------------
SUMMARY: EPA is amending certain regulations to reflect the current
delegation status of national emission standards for hazardous air
pollutants (NESHAP) in Arizona and California. Several NESHAP were
delegated to the Maricopa County Air Quality Department and the Santa
Barbara County Air Pollution Control District within the past 12
months. The purpose of this action is to update the listing in the Code
of Federal Regulations.
DATES: This rule is effective on May 17, 2011 without further notice,
unless EPA receives adverse comments by April 18, 2011. If we receive
such comments, we will publish a timely withdrawal in the Federal
Register to notify the public that this direct final rule will not take
effect.
ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR-
2011-0213, by one of the following methods:
1. Federal eRulemaking Portal: https://www.regulations.gov. Follow
the on-line instructions.
2. E-mail: steckel.andrew@epa.gov.
3. Mail or delivery: Andrew Steckel (AIR-4), U.S. Environmental
Protection Agency Region IX, 75 Hawthorne Street, San Francisco, CA
94105-3901.
Instructions: All comments will be included in the public docket
without change and may be made available online at https://www.regulations.gov, including any personal information provided,
unless the comment includes Confidential Business Information (CBI) or
other information whose disclosure is restricted by statute.
Information that
[[Page 14808]]
you consider CBI or otherwise protected should be clearly identified as
such and should not be submitted through https://www.regulations.gov or
e-mail. https://www.regulations.gov is an ``anonymous access'' system,
and EPA will not know your identity or contact information unless you
provide it in the body of your comment. If you send e-mail directly to
EPA, your e-mail address will be automatically captured and included as
part of the public comment. If EPA cannot read your comment due to
technical difficulties and cannot contact you for clarification, EPA
may not be able to consider your comment. Electronic files should avoid
the use of special characters, any form of encryption, and be free of
any defects or viruses.
Docket: The index to the docket for this action is available
electronically at https://www.regulations.gov and in hard copy at EPA
Region IX, 75 Hawthorne Street, San Francisco, California. While all
documents in the docket are listed in the index, some information may
be publicly available only at the hard copy location (e.g., copyrighted
material), and some may not be publicly available in either location
(e.g., CBI). To inspect the hard copy materials, please schedule an
appointment during normal business hours with the contact listed in the
FOR FURTHER INFORMATION CONTACT section.
FOR FURTHER INFORMATION CONTACT: Mae Wang, EPA Region IX, (415) 947-
4124, wang.mae@epa.gov.
SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us'' and
``our'' refer to EPA.
Table of Contents
I. Background
A. Delegation of NESHAP
B. Maricopa County Delegations
C. Santa Barbara County Delegations
II. EPA Action
A. Maricopa County
B. Santa Barbara County
III. Statutory and Executive Order Reviews
I. Background
A. Delegation of NESHAP
Section 112(l) of the Clean Air Act, as amended in 1990 (CAA),
authorizes EPA to delegate to State or local air pollution control
agencies the authority to implement and enforce the standards set out
in the Code of Federal Regulations, Title 40 (40 CFR), Part 63,
National Emission Standards for Hazardous Air Pollutants for Source
Categories. On November 26, 1993, EPA promulgated regulations, codified
at 40 CFR Part 63, Subpart E (hereinafter referred to as ``Subpart
E''), establishing procedures for EPA's approval of State rules or
programs under section 112(l) (see 58 FR 62262). Subpart E was later
amended on September 14, 2000 (see 65 FR 55810).
Any request for approval under CAA section 112(l) must meet the
approval criteria in 112(l)(5) and Subpart E. To streamline the
approval process for future applications, a State or local agency may
submit a one-time demonstration that it has adequate authorities and
resources to implement and enforce any CAA section 112 standards. If
such demonstration is approved, then the State or local agency would no
longer need to resubmit a demonstration of these same authorities and
resources for every subsequent request for delegation of CAA section
112 standards. However, EPA maintains the authority to withdraw its
approval if the State does not adequately implement or enforce an
approved rule or program.
B. Maricopa County Delegations
On March 2, 2000, EPA published a direct final action delegating to
the Maricopa County Air Quality Department (Maricopa County) several
NESHAP and approving Maricopa County's delegation mechanism for future
standards (see 65 FR 11231). That action explained the procedure for
EPA to grant future delegations to Maricopa County by letter, with
periodic Federal Register listings of standards that have been
delegated. On March 5, 2010, and April 5, 2010, Maricopa County
requested delegation of the following NESHAP contained in 40 CFR Part
63:
Subpart WWWWW--National Emission Standards for Hospital
Ethylene Oxide Sterilizers
Subpart YYYYY--NESHAP for Area Sources: Electric Arc Furnace
Steelmaking Facilities
Subpart ZZZZZ--NESHAP for Iron and Steel Foundries Area
Sources
Subpart BBBBBB--NESHAP for Source Category: Gasoline
Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities
Subpart CCCCCC--NESHAP for Source Category: Gasoline
Dispensing Facilities
Subpart DDDDDD--NESHAP for Polyvinyl Chloride and Copolymers
Production Area Sources
Subpart EEEEEE--NESHAP for Primary Copper Smelting Area
Sources
Subpart FFFFFF--NESHAP for Secondary Copper Smelting Area
Sources
Subpart GGGGGG--NESHAP for Primary Nonferrous Metals Area
Sources--Zinc, Cadmium, and Beryllium
Subpart HHHHHH--NESHAP: Paint Stripping and Miscellaneous
Surface Coating Operations at Area Sources
Subpart LLLLLL--NESHAP for Acrylic and Modacrylic Fibers
Production Area Sources
Subpart MMMMMM--NESHAP for Carbon Black Production Area
Sources
Subpart NNNNNN--NESHAP for Chemical Manufacturing Area
Sources: Chromium Compounds
Subpart OOOOOO--NESHAP for Flexible Polyurethane Foam
Production and Fabrication Area Sources
Subpart PPPPPP--NESHAP for Lead Acid Battery Manufacturing
Area Sources
Subpart QQQQQQ--NESHAP for Wood Preserving Area Sources
Subpart RRRRRR--NESHAP for Clay Ceramics Manufacturing Area
Sources
Subpart SSSSSS--NESHAP for Glass Manufacturing Area Sources
Subpart TTTTTT--NESHAP for Secondary Nonferrous Metals
Processing Area Sources
On May 6, 2010, EPA granted delegation to Maricopa County for these
NESHAP, along with any amendments to previously-delegated NESHAP, as of
July 1, 2008. Subsequently, on October 7, 2010, Maricopa County
requested delegation of the following NESHAP contained in 40 CFR Part
63:
Subpart WWWWWW--NESHAP: Area Source Standards for Plating and
Polishing Operations
Subpart XXXXXX--NESHAP Area Source Standards for Nine Metal
Fabrication and Finishing Source Categories
Subpart YYYYYY--NESHAP for Area Sources: Ferroalloys
Production Facilities
Subpart ZZZZZZ--NESHAP: Area Source Standards for Aluminum,
Copper, and Other Nonferrous Foundries
On December 14, 2010, EPA granted delegation to Maricopa County for
these NESHAP, along with any amendments to previously-delegated NESHAP,
as of July 1, 2009. Today's action is serving to notify the public of
the May 6, 2010, and December 14, 2010, delegations and to codify these
delegations into the Code of Federal Regulations.
C. Santa Barbara County Delegations
On October 6, 2003, the California Air Resources Board (CARB)
submitted on behalf of nine California districts a request for
delegation of all Federal section 112 standards that apply to area
sources, with the exception of the dry cleaning and chromium
electroplating
[[Page 14809]]
standards for which State or local rules have already been approved
(see 61 FR 25397 and 64 FR 12762). This request was approved on
December 19, 2003 (see 68 FR 70726). In that approval, it was explained
that future requests by other districts could be approved by letter,
followed by a Federal Register notice to codify the delegations into
the CFR.
On April 1, 2010, the Santa Barbara County Air Pollution Control
District (Santa Barbara County) asked CARB to make a delegation request
on their behalf for CAA section 112 area source standards. CARB
submitted the request on behalf of the district on May 20, 2010. On
July 30, 2010, EPA Region IX approved this request by letter, granting
the Santa Barbara County the authority to implement and enforce
existing area source standards unchanged as promulgated by EPA.
II. EPA Action
A. Maricopa County
Today's document serves to notify the public of the delegation of
NESHAP to Maricopa County on May 6, 2010, and December 14, 2010.
Today's action will codify these delegations into the CFR.
B. Santa Barbara County
This document serves to notify the public that, with the exception
of the dry cleaning and chromium electroplating standards, EPA granted
delegation of unchanged Federal section 112 area source standards to
Santa Barbara County on July 30, 2010. Today's action will codify these
delegations into the CFR. Santa Barbara County will also receive
delegation of any future area source standards or revisions 90 days
after promulgation of these standards or revisions, unless the district
chooses to decline delegation of a particular future standard by
notifying the EPA Region IX office in writing. If no such notification
is received, the delegation will go into effect 90 days after
promulgation of the standard or revision, without any additional action
from the district or EPA. Additionally, as mentioned in 74 FR 12591
(March 25, 2009), and pursuant to 40 CFR sections 63.9(a)(4)(ii) and
63.10(a)(4)(ii), EPA Region IX waives the requirement that
notifications or reports for delegated area source standards be
submitted to EPA as well as Santa Barbara County.
III. Statutory and Executive Order Reviews
Under the CAA, the Administrator is required to approve delegation
requests that comply with the provisions of the CAA and applicable
Federal regulations. 42 U.S.C. 7412(l); 40 CFR 63.91(b). Thus, in
reviewing delegation submissions, EPA's role is to approve State
choices, provided that they meet the criteria of the CAA. Accordingly,
this action merely approves State law as meeting Federal requirements
and does not impose additional requirements beyond those imposed by
State law. For that reason, this action:
Is not a ``significant regulatory action'' subject to
review by the Office of Management and Budget under Executive Order
12866 (58 FR 51735, October 4, 1993);
Does not impose an information collection burden under the
provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.);
Is certified as not having a significant economic impact
on a substantial number of small entities under the Regulatory
Flexibility Act (5 U.S.C. 601 et seq.);
Does not contain any unfunded mandate or significantly or
uniquely affect small governments, as described in the Unfunded
Mandates Reform Act of 1995 (Pub. L. 104-4);
Does not have Federalism implications as specified in
Executive Order 13132 (64 FR 43255, August 10, 1999);
Is not an economically significant regulatory action based
on health or safety risks subject to Executive Order 13045 (62 FR
19885, April 23, 1997);
Is not a significant regulatory action subject to
Executive Order 13211 (66 FR 28355, May 22, 2001);
Is not subject to requirements of Section 12(d) of the
National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272
note) because application of those requirements would be inconsistent
with the CAA; and
Does not provide EPA with the discretionary authority to
address disproportionate human health or environmental effects with
practical, appropriate, and legally permissible methods under Executive
Order 12898 (59 FR 7629, February 16, 1994).
In addition, this rule does not have Tribal implications as
specified by Executive Order 13175 (65 FR 67249, November 9, 2000),
because the delegations are not approved to apply in Indian country
located in the State, and EPA notes that it will not impose substantial
direct costs on Tribal governments or preempt Tribal law.
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the
Small Business Regulatory Enforcement Fairness Act of 1996, generally
provides that before a rule may take effect, the agency promulgating
the rule must submit a rule report, which includes a copy of the rule,
to each House of the Congress and to the Comptroller General of the
United States. EPA will submit a report containing this action and
other required information to the U.S. Senate, the U.S. House of
Representatives, and the Comptroller General of the United States prior
to publication of the rule in the Federal Register. A major rule cannot
take effect until 60 days after it is published in the Federal
Register. This action is not a ``major rule'' as defined by 5 U.S.C.
804(2).
Under section 307(b)(1) of the CAA, petitions for judicial review
of this action must be filed in the United States Court of Appeals for
the appropriate circuit by May 17, 2011. Filing a petition for
reconsideration by the Administrator of this final rule does not affect
the finality of this action for the purposes of judicial review nor
does it extend the time within which a petition for judicial review may
be filed, and shall not postpone the effectiveness of such rule or
action. Parties with objections to this direct final rule are
encouraged to file a comment in response to the parallel notice of
proposed rulemaking for this action published in the Proposed Rules
section of today's Federal Register, rather than file an immediate
petition for judicial review of this direct final rule, so that EPA can
withdraw this direct final rule and address the comment in the proposed
rulemaking. This action may not be challenged later in proceedings to
enforce its requirements (see section 307(b)(2)).
List of Subjects in 40 CFR Part 63
Environmental protection, Administrative practice and procedure,
Air pollution control, Hazardous substances, Intergovernmental
relations, Reporting and recordkeeping requirements.
Authority: This action is issued under the authority of Section
112 of the Clean Air Act, as amended, 42 U.S.C. 7412.
Dated: March 3, 2011.
Deborah Jordan,
Director, Air Division, Region IX.
Title 40, chapter I, part 63 of the Code of Federal Regulations is
amended as follows:
PART 63--[AMENDED]
0
1. The authority citation for Part 63 continues to read as follows:
Authority: 42 U.S.C. 7401, et seq.
[[Page 14810]]
Subpart E--Approval of State Programs and Delegation of Federal
Authorities
0
2. Section 63.99 is amended as follows:
0
a. By revising the table in paragraph (a)(3)(i);
0
b. By revising paragraphs (a)(5)(i)(B)(11) and (12); and
0
c. By adding paragraph (a)(5)(i)(B)(13).
Sec. 63.99 Delegated Federal authorities.
(a) * * *
(3) * * *
(i) * * *
Delegation Status for Part 63 Standards--Arizona
----------------------------------------------------------------------------------------------------------------
Subpart Description ADEQ \1\ MCAQD \2\ PDEQ \3\ PCAQCD \4\
----------------------------------------------------------------------------------------------------------------
A............................. General Provisions...... X X X X
F............................. Synthetic Organic X X X X
Chemical Manufacturing
Industry.
G............................. Synthetic Organic X X X X
Chemical Manufacturing
Industry: Process
Vents, Storage Vessels,
Transfer Operations,
and Wastewater.
H............................. Organic Hazardous Air X X X X
Pollutants: Equipment
Leaks.
I............................. Organic Hazardous Air X X X X
Pollutants: Certain
Processes Subject to
the Negotiated
Regulation for
Equipment Leaks.
J............................. Polyvinyl Chloride and X X X ............
Copolymers Production.
L............................. Coke Oven Batteries..... X X X X
M............................. Perchloroethylene Dry X X X X
Cleaning.
N............................. Hard and Decorative X X X X
Chromium Electroplating
and Chromium Anodizing
Tanks.
O............................. Ethylene Oxide X X X X
Sterilization
Facilities.
Q............................. Industrial Process X X X X
Cooling Towers.
R............................. Gasoline Distribution X X X X
Facilities.
S............................. Pulp and Paper.......... X X X ............
T............................. Halogenated Solvent X X X X
Cleaning.
U............................. Group I Polymers and X X X X
Resins.
W............................. Epoxy Resins Production X X X X
and Non-Nylon
Polyamides Production.
X............................. Secondary Lead Smelting. X X X X
Y............................. Marine Tank Vessel ............ ............ ............ ............
Loading Operations.
AA............................ Phosphoric Acid X X X ............
Manufacturing Plants.
BB............................ Phosphate Fertilizers X X X ............
Production Plants.
CC............................ Petroleum Refineries.... X X X X
DD............................ Off-Site Waste and X X X X
Recovery Operations.
EE............................ Magnetic Tape X X X X
Manufacturing
Operations.
GG............................ Aerospace Manufacturing X X X X
and Rework Facilities.
HH............................ Oil and Natural Gas X X X ............
Production Facilities.
JJ............................ Wood Furniture X X X X
Manufacturing
Operations.
KK............................ Printing and Publishing X X X X
Industry.
LL............................ Primary Aluminum X ............ X ............
Reduction Plants.
MM............................ Chemical Recovery X X X ............
Combustion Sources at
Kraft, Soda, Sulfite,
and Stand-Alone
Semichemical Pulp Mills.
OO............................ Tanks--Level 1.......... X X X X
PP............................ Containers.............. X X X X
QQ............................ Surface Impoundments.... X X X X
RR............................ Individual Drain Systems X X X X
SS............................ Closed Vent Systems, X X X ............
Control Devices,
Recovery Devices and
Routing to a Fuel Gas
System or a Process.
TT............................ Equipment Leaks--Control X X X ............
Level 1.
UU............................ Equipment Leaks--Control X X X ............
Level 2.
VV............................ Oil-Water Separators and X X X X
Organic-Water
Separators.
WW............................ Storage Vessels (Tanks)-- X X X ............
Control Level 2.
XX............................ Ethylene Manufacturing X X X ............
Process Units: Heat
Exchange Systems and
Waste Operations.
YY............................ Generic MACT Standards.. X X X ............
CCC........................... Steel Pickling.......... X X X ............
DDD........................... Mineral Wool Production. X X X ............
EEE........................... Hazardous Waste X X X ............
Combustors.
GGG........................... Pharmaceuticals X X X ............
Production.
HHH........................... Natural Gas Transmission X X X ............
and Storage Facilities.
III........................... Flexible Polyurethane X X X ............
Foam Production.
JJJ........................... Group IV Polymers and X X X X
Resins.
LLL........................... Portland Cement X X X ............
Manufacturing Industry.
MMM........................... Pesticide Active X X X ............
Ingredient Production.
NNN........................... Wool Fiberglass X X X ............
Manufacturing.
OOO........................... Manufacture of Amino/ X X X ............
Phenolic Resins.
PPP........................... Polyether Polyols X X X ............
Production.
QQQ........................... Primary Copper Smelting. X X X ............
RRR........................... Secondary Aluminum X X X ............
Production.
TTT........................... Primary Lead Smelting... X X X ............
UUU........................... Petroleum Refineries: X X X ............
Catalytic Cracking,
Catalytic Reforming,
and Sulfur Recovery
Units.
VVV........................... Publicly Owned Treatment X X X ............
Works.
XXX........................... Ferroalloys Production.. X X X ............
[[Page 14811]]
AAAA.......................... Municipal Solid Waste X X X ............
Landfills.
CCCC.......................... Manufacturing of X X X ............
Nutritional Yeast.
DDDD.......................... Plywood and Composite X X X ............
Wood Products.
EEEE.......................... Organic Liquids X X X ............
Distribution (non-
gasoline).
FFFF.......................... Miscellaneous Organic X X X ............
Chemical Manufacturing.
GGGG.......................... Solvent Extraction for X X X ............
Vegetable Oil
Production.
HHHH.......................... Wet-Formed Fiberglass X X X ............
Mat Production.
IIII.......................... Surface Coating of X X ............ ............
Automobiles and Light-
Duty Trucks.
JJJJ.......................... Paper and Other Web X X X ............
Coating.
KKKK.......................... Surface Coating of Metal X X X ............
Cans.
MMMM.......................... Miscellaneous Metal X X X ............
Parts and Products.
NNNN.......................... Large Appliances........ X X X ............
OOOO.......................... Printing, Coating, and X X X ............
Dyeing of Fabrics and
Other Textiles.
PPPP.......................... Surface Coating of X X ............ ............
Plastic Parts and
Products.
QQQQ.......................... Wood Building Products.. X X X ............
RRRR.......................... Surface Coating of Metal X X X ............
Furniture.
SSSS.......................... Surface Coating of Metal X X X ............
Coil.
TTTT.......................... Leather Finishing X X X ............
Operations.
UUUU.......................... Cellulose Products X X X ............
Manufacturing.
VVVV.......................... Boat Manufacturing...... X X X ............
WWWW.......................... Reinforced Plastics X X X ............
Composites Production.
XXXX.......................... Tire Manufacturing...... X X X ............
YYYY.......................... Stationary Combustion X X X ............
Turbines.
ZZZZ.......................... Stationary Reciprocating X X ............ ............
Internal Combustion
Engines.
AAAAA......................... Lime Manufacturing X X X ............
Plants.
BBBBB......................... Semiconductor X X X ............
Manufacturing.
CCCCC......................... Coke Oven: Pushing, X X X ............
Quenching and Battery
Stacks.
DDDDD......................... Industrial, Commercial, X X ............ ............
and Institutional
Boiler and Process
Heaters.
EEEEE......................... Iron and Steel Foundries X X X ............
FFFFF......................... Integrated Iron and X X X ............
Steel.
GGGGG......................... Site Remediation........ X X X ............
HHHHH......................... Miscellaneous Coating X X X ............
Manufacturing.
IIIII......................... Mercury Emissions from X X X ............
Mercury Cell Chlor-
Alkali Plants.
JJJJJ......................... Brick and Structural X X X ............
Clay Products
Manufacturing.
KKKKK......................... Clay Ceramics X X X ............
Manufacturing.
LLLLL......................... Asphalt Roofing and X X X ............
Processing.
MMMMM......................... Flexible Polyurethane X X X ............
Foam Fabrication
Operation.
NNNNN......................... Hydrochloric Acid X X X ............
Production.
PPPPP......................... Engine Test Cells/Stands X X X ............
QQQQQ......................... Friction Products X X X ............
Manufacturing.
RRRRR......................... Taconite Iron Ore X X X ............
Processing.
SSSSS......................... Refractory Products X X X ............
Manufacturing.
TTTTT......................... Primary Magnesium X X X ............
Refining.
WWWWW......................... Hospital Ethylene Oxide ............ X X ............
Sterilizers.
YYYYY......................... Area Sources: Electric ............ X X ............
Arc Furnace Steelmaking
Facilities.
ZZZZZ......................... Iron and Steel Foundries ............ X X ............
Area Sources.
BBBBBB........................ Gasoline Distribution ............ X X ............
Bulk Terminals, Bulk
Plants, and Pipeline
Facilities.
CCCCCC........................ Gasoline Dispensing ............ X X ............
Facilities.
DDDDDD........................ Polyvinyl Chloride and ............ X X ............
Copolymers Production
Area Sources.
EEEEEE........................ Primary Copper Smelting ............ X X ............
Area Sources.
FFFFFF........................ Secondary Copper ............ X X ............
Smelting Area Sources.
GGGGGG........................ Primary Nonferrous ............ X X ............
Metals Area Sources--
Zinc, Cadmium, and
Beryllium.
HHHHHH........................ Paint Stripping and ............ X X ............
Miscellaneous Surface
Coating Operations at
Area Sources.
LLLLLL........................ Acrylic and Modacrylic ............ X X ............
Fibers Production Area
Sources.
MMMMMM........................ Carbon Black Production ............ X X ............
Area Sources.
NNNNNN........................ Chemical Manufacturing ............ X X ............
Area Sources: Chromium
Compounds.
OOOOOO........................ Flexible Polyurethane ............ X X ............
Foam Production and
Fabrication Area
Sources.
PPPPPP........................ Lead Acid Battery ............ X X ............
Manufacturing Area
Sources.
QQQQQQ........................ Wood Preserving Area ............ X X ............
Sources.
RRRRRR........................ Clay Ceramics ............ X X ............
Manufacturing Area
Sources.
SSSSSS........................ Glass Manufacturing Area ............ X X ............
Sources.
TTTTTT........................ Secondary Nonferrous ............ X X ............
Metals Processing Area
Sources.
WWWWWW........................ Area Source Standards ............ X ............ ............
for Plating and
Polishing Operations.
XXXXXX........................ Area Source Standards ............ X ............ ............
for Nine Metal
Fabrication and
Finishing Source
Categories.
YYYYYY........................ Area Sources: ............ X ............ ............
Ferroalloys Production
Facilities.
[[Page 14812]]
ZZZZZZ........................ Area Source Standards ............ X ............ ............
for Aluminum, Copper,
and Other Nonferrous
Foundries.
----------------------------------------------------------------------------------------------------------------
\1\ Arizona Department of Environmental Quality.
\2\ Maricopa County Air Quality Department.
\3\ Pima County Department of Environmental Quality.
\4\ Pinal County Air Quality Control District.
(5) * * *
(i) * * *
(B) * * *
(11) Santa Barbara County Air Pollution Control District.
(12) Ventura County Air Pollution Control District.
(13) Yolo-Solano Air Quality Management District.
* * * * *
[FR Doc. 2011-6425 Filed 3-17-11; 8:45 am]
BILLING CODE 6560-50-P
