Notice of Issuance of Regulatory Guide, 14108 [2011-5970]

Download as PDF 14108 Federal Register / Vol. 76, No. 50 / Tuesday, March 15, 2011 / Notices System (ADAMS) under Accession No. ML101670489. Electronic copies of Regulatory Guide 1.43, Revision 1 are available through the NRC’s public Web site under ‘‘Regulatory Guides’’ at http: //www.nrc.gov/reading-rm/doccollections/. The regulatory analysis may be found under ADAMS Accession No. ML101670471. In addition, regulatory guides are available for inspection at the NRC’s Public Document Room (PDR) located at Room O–1F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852–2738. The PDR’s mailing address is USNRC PDR, Washington, DC 20555–0001. The PDR can also be reached by telephone at (301) 415–4737 or (800) 397–4209, by fax at (301) 415–3548, and by e-mail to pdr.resource@nrc.gov. Regulatory guides are not copyrighted, and NRC approval is not required to reproduce them. Dated at Rockville, Maryland, this 7th day of March, 2011. For the Nuclear Regulatory Commission. Thomas H. Boyce, Chief, Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2011–5967 Filed 3–14–11; 8:45 am] BILLING CODE 7590–01–P NUCLEAR REGULATORY COMMISSION [NRC–2009–0275] Notice of Issuance of Regulatory Guide Nuclear Regulatory Commission. ACTION: Notice of Issuance and Availability of Regulatory Guide 1.50, Revision 1, ‘‘Control of Preheat Temperature for Welding of Low-Alloy Steel.’’ AGENCY: staff uses in evaluating specific problems or postulated accidents, and data that the staff needs in its review of applications for permits and licenses. Revision 1 of Regulatory Guide 1.50, ‘‘Control of Preheat Temperature for Welding of Low-Alloy Steel,’’ was issued with a temporary identification as Draft Regulatory Guide, DG–1222. This guide describes a method that the staff of the NRC considers acceptable for implementing regulatory requirements related to the control of welding for lowalloy steel components during initial fabrication. This guide applies to lightwater-cooled reactors. II. Further Information In June 2009, DG–1222 was published with a public comment period of 60 days from the issuance of the guide. The public comment period was extended until October 1, 2009. The staff’s responses to the comments received are located in the NRC’s Agencywide Documents Access and Management System (ADAMS) under Accession No. ML101880091. Electronic copies of Regulatory Guide 1.50, Revision 1 are available through the NRC’s public Web site under ‘‘Regulatory Guides’’ at http:// www.nrc.gov/reading-rm/doccollections/. The regulatory analysis may be found under ADAMS Accession No. ML101870625. In addition, regulatory guides are available for inspection at the NRC’s Public Document Room (PDR) located at Room O–1F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852–2738. The PDR’s mailing address is USNRC PDR, Washington, DC 20555–0001. The PDR can also be reached by telephone at (301) 415–4737 or (800) 397–4209, by fax at (301) 415–3548, and by e-mail to pdr.resource@nrc.gov. Regulatory guides are not copyrighted, and NRC approval is not required to reproduce them. Gary L. Stevens, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555– 0001, telephone: (301) 251–7569 or email Gary.Stevens@nrc.gov. SUPPLEMENTARY INFORMATION: Dated at Rockville, Maryland, this 7th day of March, 2011. For the Nuclear Regulatory Commission. Thomas H. Boyce, Chief, Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. I. Introduction [FR Doc. 2011–5970 Filed 3–14–11; 8:45 am] The U.S. Nuclear Regulatory Commission (NRC or Commission) is issuing a revision to an existing guide in the agency’s ‘‘Regulatory Guide’’ series. This series was developed to describe and make available to the public information such as methods that are acceptable to the NRC staff for implementing specific parts of the agency’s regulations, techniques that the BILLING CODE 7590–01–P srobinson on DSKHWCL6B1PROD with NOTICES FOR FURTHER INFORMATION CONTACT: VerDate Mar<15>2010 16:50 Mar 14, 2011 Jkt 223001 NUCLEAR REGULATORY COMMISSION [NRC–2009–0274] Notice of Issuance of Regulatory Guide Nuclear Regulatory Commission. AGENCY: PO 00000 Frm 00141 Fmt 4703 Sfmt 4703 Notice of Issuance and Availability of Regulatory Guide 1.34, Revision 1, ‘‘Control of Electroslag Weld Properties.’’ ACTION: Gary L. Stevens, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555– 0001, telephone (301) 251–7569 or email Gary.Stevens@nrc.gov. SUPPLEMENTARY INFORMATION: FOR FURTHER INFORMATION CONTACT: I. Introduction The U.S. Nuclear Regulatory Commission (NRC) is issuing a revision to an existing guide in the agency’s ‘‘Regulatory Guide’’ series. This series was developed to describe and make available to the public information such as methods that are acceptable to the NRC staff for implementing specific parts of the agency’s regulations, techniques that the staff uses in evaluating specific problems or postulated accidents, and data that the staff needs in its review of applications for permits and licenses. Revision 1 of Regulatory Guide 1.34, ‘‘Control of Electroslag Weld Properties,’’ was issued with a temporary identification as Draft Regulatory Guide, DG–1223. This guide describes methods that the staff of the NRC considers acceptable for implementing requirements about the control of weld properties when fabricating electroslag welds for nuclear components made of ferritic or austenitic materials. This guide applies to light-water reactors. II. Further Information In June 2009, DG–1223 was published with a public comment period of 60 days from the issuance of the guide. The public comment period was extended until October 1, 2009. The staff’s responses to the comments received are located in the NRC’s Agencywide Documents Access and Management System (ADAMS) under Accession No. ML101670369. Electronic copies of Regulatory Guide 1.34, Revision 1 are available through the NRC’s public Web site under ‘‘Regulatory Guides’’ at http://www.nrc.gov/reading-rm/doccollections/. The regulatory analysis may be found in ADAMS under Accession No. ML101670363. In addition, regulatory guides are available for inspection at the NRC’s Public Document Room (PDR) located at Room O–1F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852–2738. The PDR’s mailing address is USNRC PDR, Washington, DC 20555–0001. The PDR can also be reached by telephone at (301) 415–4737 or (800) 397–4209, by E:\FR\FM\15MRN1.SGM 15MRN1

Agencies

[Federal Register Volume 76, Number 50 (Tuesday, March 15, 2011)]
[Notices]
[Page 14108]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-5970]


-----------------------------------------------------------------------

NUCLEAR REGULATORY COMMISSION

[NRC-2009-0275]


Notice of Issuance of Regulatory Guide

AGENCY: Nuclear Regulatory Commission.

ACTION: Notice of Issuance and Availability of Regulatory Guide 1.50, 
Revision 1, ``Control of Preheat Temperature for Welding of Low-Alloy 
Steel.''

-----------------------------------------------------------------------

FOR FURTHER INFORMATION CONTACT: Gary L. Stevens, Office of Nuclear 
Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 
20555-0001, telephone: (301) 251-7569 or e-mail Gary.Stevens@nrc.gov.

SUPPLEMENTARY INFORMATION:

I. Introduction

    The U.S. Nuclear Regulatory Commission (NRC or Commission) is 
issuing a revision to an existing guide in the agency's ``Regulatory 
Guide'' series. This series was developed to describe and make 
available to the public information such as methods that are acceptable 
to the NRC staff for implementing specific parts of the agency's 
regulations, techniques that the staff uses in evaluating specific 
problems or postulated accidents, and data that the staff needs in its 
review of applications for permits and licenses.
    Revision 1 of Regulatory Guide 1.50, ``Control of Preheat 
Temperature for Welding of Low-Alloy Steel,'' was issued with a 
temporary identification as Draft Regulatory Guide, DG-1222. This guide 
describes a method that the staff of the NRC considers acceptable for 
implementing regulatory requirements related to the control of welding 
for low-alloy steel components during initial fabrication. This guide 
applies to light-water-cooled reactors.

II. Further Information

    In June 2009, DG-1222 was published with a public comment period of 
60 days from the issuance of the guide. The public comment period was 
extended until October 1, 2009. The staff's responses to the comments 
received are located in the NRC's Agencywide Documents Access and 
Management System (ADAMS) under Accession No. ML101880091. Electronic 
copies of Regulatory Guide 1.50, Revision 1 are available through the 
NRC's public Web site under ``Regulatory Guides'' at http://www.nrc.gov/reading-rm/doc-collections/. The regulatory analysis may be 
found under ADAMS Accession No. ML101870625.
    In addition, regulatory guides are available for inspection at the 
NRC's Public Document Room (PDR) located at Room O-1F21, One White 
Flint North, 11555 Rockville Pike, Rockville, Maryland 20852-2738. The 
PDR's mailing address is USNRC PDR, Washington, DC 20555-0001. The PDR 
can also be reached by telephone at (301) 415-4737 or (800) 397-4209, 
by fax at (301) 415-3548, and by e-mail to pdr.resource@nrc.gov.
    Regulatory guides are not copyrighted, and NRC approval is not 
required to reproduce them.

    Dated at Rockville, Maryland, this 7th day of March, 2011.
    For the Nuclear Regulatory Commission.
Thomas H. Boyce,
Chief, Regulatory Guide Development Branch, Division of Engineering, 
Office of Nuclear Regulatory Research.
[FR Doc. 2011-5970 Filed 3-14-11; 8:45 am]
BILLING CODE 7590-01-P