Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 11424-11425 [2011-4625]

Download as PDF 11424 Notices Federal Register Vol. 76, No. 41 Wednesday, March 2, 2011 reached at 888–942–9574, and passcode, 6315042. Public participation is also available via a limited number of seats. For more information on open seating please reference http://www.eda.gov/ NACIE. Please specify any requests for reasonable accommodation of auxiliary aids at least five business days in advance of the meeting. Last minute requests will be accepted, but may be impossible to fill. This section of the FEDERAL REGISTER contains documents other than rules or proposed rules that are applicable to the public. Notices of hearings and investigations, committee meetings, agency decisions and rulings, delegations of authority, filing of petitions and applications and agency statements of organization and functions are examples of documents appearing in this section. DEPARTMENT OF COMMERCE Dated: February 24, 2011. Paul J. Corson, Office of Innovation and Entrepreneurship, U.S. Department of Commerce. Agenda topics to be discussed include: Briefings by outside experts, sub-committee updates and discussion, and Q & A with the audience. Any member of the public may submit pertinent written comments concerning the Council’s affairs at any time before and after the meeting. Comments may be submitted to Claire Brunner at the contact information indicated below. Copies of Board meeting minutes will be available within 90 days of the meeting. Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance SUPPLEMENTARY INFORMATION: Meeting of the National Advisory Council on Innovation and Entrepreneurship Office of Innovation and Entrepreneurship, U.S. Department of Commerce. ACTION: Notice of an open meeting. AGENCY: The National Advisory Council on Innovation and Entrepreneurship will hold a meeting on Tuesday, March 15, 2011. The meeting will be conducted from 9 a.m. to 12 p.m. and will be opened to the public via listen only conference call, as well as limited number of open seats, at the event. The Council was chartered on November 10, 2009, to advise the Secretary of Commerce on matters relating to innovation and entrepreneurship in the United States. DATE: March 15, 2011. TIME: 9 a.m.–12 p.m. (EST). ADDRESSES: Public participation via a listen in conference number can be SUMMARY: FOR FURTHER INFORMATION CONTACT: Claire Brunner, Office of Innovation and Entrepreneurship, Room 7019, 1401 Constitution Avenue, NW., Washington, DC 20230, telephone: 202–482–2686, e-mail: cbrunner@eda.doc.gov. Please reference, ‘‘NACIE March 15, 2011’’ in the subject line of your e-mail. [FR Doc. 2011–4664 Filed 3–1–11; 8:45 am] BILLING CODE 3510–03–P DEPARTMENT OF COMMERCE Economic Development Administration Economic Development Administration, Department of Commerce. ACTION: Notice and Opportunity for Public Comment. AGENCY: Pursuant to Section 251 of the Trade Act of 1974, as amended (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. Accordingly, EDA has initiated investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each of these firms contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE [2/3/2011 through 2/23/2011] Firm name Address Date accepted for investigation 400 Riverside Avenue, Medford, MA 02155. 07–Feb–11 Dependable Glass Works, Inc .. emcdonald on DSK2BSOYB1PROD with NOTICES Boston Retail Products, Inc ....... 11–Feb–11 Gold Leaf Design Group ........... 509 E. Gibson Street, Covington, LA 70433. 1300 S. Koster Ave, Chicago, IL 60623. Lutco, Inc ................................... 677 Cambridge Street, Worcester, MA 01610. 11–Feb–11 VerDate Mar<15>2010 16:34 Mar 01, 2011 Jkt 223001 PO 00000 Frm 00001 11–Feb–11 Fmt 4703 Sfmt 4703 Products The firm designs and manufactures a wide variety of custom and in-stock solutions for retail and non-retail environments. Their display, power and protection solutions include fixture, floor and wall damage protection, and home center merchandising. The firm manufactures various products for industrial and home use out of tempered glass. The firm designs, manufactures, and assembles decorative accessories and arts such as permanent botanical dis´ plays, decorative vessels, home decor products, and interior accents. The firm manufactures radial ball bearings, thrust ball bearings, housed bearing assemblies, flangettes/pillow blocks, metal stampings and custom products. E:\FR\FM\02MRN1.SGM 02MRN1 Federal Register / Vol. 76, No. 41 / Wednesday, March 2, 2011 / Notices 11425 LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT ASSISTANCE—Continued [2/3/2011 through 2/23/2011] Firm name Address Date accepted for investigation Martin David, Inc ....................... 68–B Winter Street, Holyoke, MA 01040. 11–Feb–11 Paul Schurman Machine, Inc .... 23201 NE 10th Avenue (PO Box 999), Ridgefield, WA 98642. 999 Adams Street (PO Box 86), Abington, MA 02351. 11–Feb–11 2680 Industrial Drive, Ogden, UT 84401. 1755 Birchwood Avenue, Des Plaines, IL 60018. 6200 Equitable Rd, Kansas City, MO 64120–1312. 14–Feb–11 Precast Specialties Corporation Richards Sheet Metal Works, Inc. Supreme Manufacturing Company, Inc. dba C&L Supreme. Western Forms, Inc ................... Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 7106, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the requirements set forth in EDA’s regulations at 13 CFR 315.9 for procedures to request a public hearing. The Catalog of Federal Domestic Assistance official number and title for the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance for Firms. Dated: February 23, 2011. Bryan Borlik, Director. [FR Doc. 2011–4625 Filed 3–1–11; 8:45 am] BILLING CODE 3510–24–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1744] emcdonald on DSK2BSOYB1PROD with NOTICES Grant of Authority for Subzone Status; Max Home, LLC (Upholstered Furniture); Fulton and Iuka, MS Pursuant to its authority under the Foreign-Trade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the Foreign-Trade Zones Board (the Board) adopts the following Order: Whereas, the Foreign-Trade Zones Act provides for ‘‘* * * the establishment * * * of foreign-trade zones in ports of entry of the United States, to expedite VerDate Mar<15>2010 16:34 Mar 01, 2011 Jkt 223001 08–Feb–11 11–Feb–11 11–Feb–11 Products The firm manufactures machined parts and components such as assault rifle handguards, gun sights front and rear, sling and strap attachments for military weapons, and barrel nuts. The firm manufactures pulp and paper forming and centrifugal pump machinery and parts. The firm custom manufacturers concrete architectural panels, curbs, hand holes, pull boxes, light bases, and bumper logs. The firm manufactures structural fabricated metal products for transportation, mining and industrial machinery. The firm manufactures precision machined CNC components for the packaging, scanning, and control industries. The firm manufactures aluminum concrete forming systems. and encourage foreign commerce, and for other purposes,’’ and authorizes the Foreign-Trade Zones Board to grant to qualified corporations the privilege of establishing foreign-trade zones in or adjacent to U.S. Customs and Border Protection ports of entry; Whereas, the Board’s regulations (15 CFR part 400) provide for the establishment of special-purpose subzones when existing zone facilities cannot serve the specific use involved, and when the activity results in a significant public benefit and is in the public interest; Whereas, the Greater Mississippi Foreign-Trade Zone, Inc., grantee of Foreign-Trade Zone 158, has made application to the Board for authority to establish a special-purpose subzone at the upholstered furniture manufacturing facilities of Max Home, LLC located in Fulton and Iuka, Mississippi (FTZ Docket 41–2009, filed 8–3–2009; amended 3–12–2010); Whereas, notice inviting public comment has been given in the Federal Register (74 FR 52454, 10–13–2009; 75 FR 12730, 3–17–2010) and the application has been processed pursuant to the FTZ Act and the Board’s regulations; and, Whereas, the Board adopts the findings and recommendations of the examiner’s report, and finds that the requirements of the FTZ Act and Board’s regulations would be satisfied, and that the proposal would be in the public interest if subject to the restrictions listed below; Now, therefore, the Board hereby grants authority for subzone status for activity related to the manufacture of upholstered furniture at the Max Home, PO 00000 Frm 00002 Fmt 4703 Sfmt 9990 LLC facilities located in Fulton and Iuka, Mississippi (Subzone 158F), as described in the application and Federal Register notices, subject to the FTZ Act and the Board’s regulations, including Section 400.28, and further subject to the following conditions: 1. The annual quantitative volume of foreign micro-denier suede upholstery fabric finished with a hot caustic soda solution that Max Home, LLC may admit to the proposed subzone under nonprivileged foreign status (19 CFR 146.42) is limited to 2.23 million square yards. 2. Max Home, LLC must admit all foreign-origin upholstery fabrics other than micro-denier suede fabric finished with a hot caustic soda solution to the proposed subzone under domestic (duty-paid) status (19 CFR 146.43). 3. For the purpose of monitoring by the FTZ Staff, Max Home, LLC shall submit additional operating information to supplement its annual report data. 4. The subzone authority for the Max Home, LLC facilities shall remain in effect for a period of five years from the date of approval by the FTZ Board. Signed at Washington, DC, this 18th day of February 2011. Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration, Alternate Chairman, ForeignTrade Zones Board. Attest: Andrew McGilvray, Executive Secretary. [FR Doc. 2011–4672 Filed 3–1–11; 8:45 am] BILLING CODE P E:\FR\FM\02MRN1.SGM 02MRN1

Agencies

[Federal Register Volume 76, Number 41 (Wednesday, March 2, 2011)]
[Notices]
[Pages 11424-11425]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-4625]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and Opportunity for Public Comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act of 1974, as amended (19 
U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has 
received petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. Accordingly, EDA has 
initiated investigations to determine whether increased imports into 
the United States of articles like or directly competitive with those 
produced by each of these firms contributed importantly to the total or 
partial separation of the firm's workers, or threat thereof, and to a 
decrease in sales or production of each petitioning firm.

   List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment Assistance
                                          [2/3/2011 through 2/23/2011]
----------------------------------------------------------------------------------------------------------------
                                                        Date accepted
           Firm name                    Address              for                        Products
                                                        investigation
----------------------------------------------------------------------------------------------------------------
Boston Retail Products, Inc...  400 Riverside Avenue,       07-Feb-11  The firm designs and manufactures a wide
                                 Medford, MA 02155.                     variety of custom and in-stock solutions
                                                                        for retail and non-retail environments.
                                                                        Their display, power and protection
                                                                        solutions include fixture, floor and
                                                                        wall damage protection, and home center
                                                                        merchandising.
Dependable Glass Works, Inc...  509 E. Gibson Street,       11-Feb-11  The firm manufactures various products
                                 Covington, LA 70433.                   for industrial and home use out of
                                                                        tempered glass.
Gold Leaf Design Group........  1300 S. Koster Ave,         11-Feb-11  The firm designs, manufactures, and
                                 Chicago, IL 60623.                     assembles decorative accessories and
                                                                        arts such as permanent botanical
                                                                        displays, decorative vessels, home
                                                                        d[eacute]cor products, and interior
                                                                        accents.
Lutco, Inc....................  677 Cambridge Street,       11-Feb-11  The firm manufactures radial ball
                                 Worcester, MA 01610.                   bearings, thrust ball bearings, housed
                                                                        bearing assemblies, flangettes/pillow
                                                                        blocks, metal stampings and custom
                                                                        products.

[[Page 11425]]

 
Martin David, Inc.............  68-B Winter Street,         11-Feb-11  The firm manufactures machined parts and
                                 Holyoke, MA 01040.                     components such as assault rifle
                                                                        handguards, gun sights front and rear,
                                                                        sling and strap attachments for military
                                                                        weapons, and barrel nuts.
Paul Schurman Machine, Inc....  23201 NE 10th Avenue        11-Feb-11  The firm manufactures pulp and paper
                                 (PO Box 999),                          forming and centrifugal pump machinery
                                 Ridgefield, WA 98642.                  and parts.
Precast Specialties             999 Adams Street (PO        08-Feb-11  The firm custom manufacturers concrete
 Corporation.                    Box 86), Abington, MA                  architectural panels, curbs, hand holes,
                                 02351.                                 pull boxes, light bases, and bumper
                                                                        logs.
Richards Sheet Metal Works,     2680 Industrial Drive,      14-Feb-11  The firm manufactures structural
 Inc.                            Ogden, UT 84401.                       fabricated metal products for
                                                                        transportation, mining and industrial
                                                                        machinery.
Supreme Manufacturing Company,  1755 Birchwood Avenue,      11-Feb-11  The firm manufactures precision machined
 Inc. dba C&L Supreme.           Des Plaines, IL 60018.                 CNC components for the packaging,
                                                                        scanning, and control industries.
Western Forms, Inc............  6200 Equitable Rd,          11-Feb-11  The firm manufactures aluminum concrete
                                 Kansas City, MO 64120-                 forming systems.
                                 1312.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter.
    A written request for a hearing must be submitted to the Trade 
Adjustment Assistance for Firms Division, Room 7106, Economic 
Development Administration, U.S. Department of Commerce, Washington, DC 
20230, no later than ten (10) calendar days following publication of 
this notice.
    Please follow the requirements set forth in EDA's regulations at 13 
CFR 315.9 for procedures to request a public hearing. The Catalog of 
Federal Domestic Assistance official number and title for the program 
under which these petitions are submitted is 11.313, Trade Adjustment 
Assistance for Firms.

    Dated: February 23, 2011.
Bryan Borlik,
Director.
[FR Doc. 2011-4625 Filed 3-1-11; 8:45 am]
BILLING CODE 3510-24-P