Third Party Testing for Certain Children's Products; Full-Size Baby Cribs and Non-Full-Size Baby Cribs: Requirements for Accreditation of Third Party Conformity Assessment Bodies, 81789-81792 [2010-32180]

Download as PDF Federal Register / Vol. 75, No. 248 / Tuesday, December 28, 2010 / Rules and Regulations part of new consumer product safety standards to be codified at 16 CFR parts 1219 and 1220. C. Comment on the Proposal In the Federal Register of July 23, 2010 (75 FR 43107), the Commission published a notice of proposed rulemaking proposing to revoke 16 CFR parts 1508 and 1509. We received one comment on the proposal. The comment agreed with the proposed revocation, stating: ‘‘The proposed new regulations will be more thorough and comprehensive than the old regulations. It is simply logical to revoke the old outdated 16 CFR parts 1508 and 1509.’’ We agree with the comment, and therefore, we are revoking 16 CFR parts 1508 and 1509 entirely. D. Paperwork Reduction Act This rule would not impose any information collection requirements. Accordingly, this rule is not subject to the Paperwork Reduction Act, 44 U.S.C. 3501–3520. E. Environmental Considerations This rule falls within the scope of the Commission’s environmental review regulation at 16 CFR 1021.5(c)(1), which provides a categorical exclusion from any requirement for the agency to prepare an environmental assessment or environmental impact statement for rules that revoke product safety standards. F. Effective Date The final rule to revoke 16 CFR parts 1508 and 1509 becomes effective on June 28, 2011. This date corresponds to the effective date of the new mandatory standards developed for full-size and non-full-size cribs. List of Subjects 16 CFR Part 1508 Consumer protection, Cribs and bassinets, Infants and children, Reporting and recordkeeping requirements. emcdonald on DSK2BSOYB1PROD with RULES2 16 CFR Part 1509 Consumer protection, Cribs and bassinets, Infants and children, Reporting and recordkeeping requirements. ■ For the reasons stated above, and under the authority of section 3 of the CPSIA and 5 U.S.C. 553, the Consumer Product Safety Commission removes 16 CFR parts 1508 and 1509 entirely. PART 1508—[REMOVED] 1. Under authority of section 3 of the CPSIA, part 1508 is removed. ■ VerDate Mar<15>2010 22:20 Dec 27, 2010 Jkt 223001 PART 1509—[REMOVED] 2. Under authority of section 3 of the CPSIA, part 1509 is removed. ■ Dated: December 17, 2010. Todd A. Stevenson, Secretary, U.S. Consumer Product Safety Commission. [FR Doc. 2010–32179 Filed 12–27–10; 8:45 am] BILLING CODE 6355–01–P CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. CPSC–2009–0064] 16 CFR Parts 1219 and 1220 Third Party Testing for Certain Children’s Products; Full-Size Baby Cribs and Non-Full-Size Baby Cribs: Requirements for Accreditation of Third Party Conformity Assessment Bodies Consumer Product Safety Commission. ACTION: Notice of requirements. AGENCY: The Consumer Product Safety Commission (CPSC or Commission) is issuing a notice of requirements that provides the criteria and process for Commission acceptance of accreditation of third party conformity assessment bodies for testing pursuant to specific CPSC regulations relating to full-size and non-full-size baby cribs. The Commission is issuing this notice of requirements pursuant to section 14(a)(3)(B)(vi) of the Consumer Product Safety Act (CPSA) (15 U.S.C. 2063(a)(3)(B)(vi)). SUMMARY: Effective Date: The requirements for accreditation of third party conformity assessment bodies to assess conformity with 16 CFR parts 1219 and/or 1220 are effective December 28, 2010. FOR FURTHER INFORMATION CONTACT: Robert ‘‘Jay’’ Howell, Assistant Executive Director for Hazard Identification and Reduction, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, Maryland 20814; email rhowell@cpsc.gov. SUPPLEMENTARY INFORMATION: DATES: I. Introduction Section 14(a)(3)(B)(vi) of the CPSA, as added by section 102(a)(2) of the Consumer Product Safety Improvement Act of 2008 (CPSIA), Public Law 110– 314, directs the CPSC to publish a notice of requirements for accreditation of third party conformity assessment bodies to assess children’s products for conformity with ‘‘other children’s PO 00000 Frm 00025 Fmt 4701 Sfmt 4700 81789 product safety rules.’’ Section 14(f)(1) of the CPSA defines ‘‘children’s product safety rule’’ as ‘‘a consumer product safety rule under [the CPSA] or similar rule, regulation, standard, or ban under any other Act enforced by the Commission, including a rule declaring a consumer product to be a banned hazardous product or substance.’’ Under section 14(a)(3)(A) of the CPSA, each manufacturer (including the importer) or private labeler of products subject to those regulations must have products that are manufactured more than 90 days after the Federal Register publication date of a notice of the requirements for accreditation, tested by a third party conformity assessment body accredited to do so, and must issue a certificate of compliance with the applicable regulations based on that testing. Section 14(a)(2) of the CPSA, as added by section 102(a)(2) of the CPSIA, requires that certification be based on testing of sufficient samples of the product, or samples that are identical in all material respects to the product. The Commission also emphasizes that, irrespective of certification, the product in question must comply with applicable CPSC requirements (see, e.g., section 14(h) of the CPSA, as added by section 102(b) of the CPSIA). This notice provides the criteria and process for Commission acceptance of accreditation of third party conformity assessment bodies for testing pursuant to safety standards for full-size and nonfull-size baby cribs, which appears elsewhere in this issue of the Federal Register. The standards for full-size and non-full-size baby cribs will be codified at 16 CFR parts 1219 and 1220 respectively. The standards contain the test methods that conformity assessment bodies will use to assess full-size and non-full-size baby cribs. The Commission is recognizing limited circumstances in which it will accept certifications based on product testing conducted before the full-size and nonfull-size baby crib standards become effective in six months. The details regarding those limited circumstances can be found in part IV of this document below. Although section 14(a)(3)(B)(vi) of the CPSA directs the CPSC to publish a notice of requirements for accreditation of third party conformity assessment bodies to assess conformity with ‘‘all other children’s product safety rules,’’ this notice of requirements is limited to the test methods identified immediately above. The CPSC also recognizes that section 14(a)(3)(B)(vi) of the CPSA is captioned: ‘‘All Other Children’s Product Safety Rules,’’ but the body of the statutory E:\FR\FM\28DER2.SGM 28DER2 emcdonald on DSK2BSOYB1PROD with RULES2 81790 Federal Register / Vol. 75, No. 248 / Tuesday, December 28, 2010 / Rules and Regulations requirement refers only to ‘‘other children’s product safety rules.’’ Nevertheless, section 14(a)(3)(B)(vi) of the CPSA could be construed as requiring a notice of requirements for ‘‘all’’ other children’s product safety rules, rather than as a notice of requirements for ‘‘some’’ or ‘‘certain’’ children’s product safety rules. However, whether a particular rule represents a ‘‘children’s product safety rule’’ may be subject to interpretation, and the Commission staff is continuing to evaluate which rules, regulations, standards, or bans are ‘‘children’s product safety rules.’’ The CPSC intends to issue additional notices of requirements for other rules which the Commission determines to be ‘‘children’s product safety rules.’’ This notice of requirements applies to all third party conformity assessment bodies as described in section 14(f)(2) of the CPSA. Generally speaking, such third party conformity assessment bodies are: (1) Third party conformity assessment bodies that are not owned, managed, or controlled by a manufacturer or private labeler of a children’s product to be tested by the third party conformity assessment body for certification purposes; (2) ‘‘firewalled’’ conformity assessment bodies (those that are owned, managed, or controlled by a manufacturer or private labeler of a children’s product to be tested by the third party conformity assessment body for certification purposes and that seek accreditation under the additional statutory criteria for ‘‘firewalled’’ conformity assessment bodies); and (3) third party conformity assessment bodies owned or controlled, in whole or in part, by a government. The Commission requires baseline accreditation of each category of third party conformity assessment body to the International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC) Standard 17025:2005, ‘‘General Requirements for the Competence of Testing and Calibration Laboratories.’’ The accreditation must be by an accreditation body that is a signatory to the International Laboratory Accreditation Cooperation—Mutual Recognition Arrangement (ILAC–MRA), and the scope of the accreditation must include testing for any of the test methods identified earlier in part I of this document for which the third party conformity assessment body seeks to be accredited. (A description of the history and content of the ILAC–MRA approach and of the requirements of the ISO/IEC 17025:2005 laboratory accreditation standard is provided in the CPSC staff VerDate Mar<15>2010 20:54 Dec 27, 2010 Jkt 223001 briefing memorandum ‘‘Third Party Conformity Assessment Body Accreditation Requirements for Testing Compliance With 16 CFR Part 1501 (Small Parts Regulations),’’ dated November 2008 and available on the CPSC’s Web site at https://www.cpsc.gov/ library/foia/foia09/brief/smallparts.pdf.) The Commission has established an electronic accreditation registration and listing system that can be accessed via its Web site at https://www.cpsc.gov/ about/cpsia/labaccred.html. In the Federal Register of October 22, 2008 (73 FR 62965), the Commission published a notice of requirements for the accreditation of third party conformity assessment bodies to test children’s products for conformity with the then-existing CPSC regulations for full-size baby cribs at 16 CFR part 1508 and for non-full-size baby cribs at 16 CFR part 1509. Elsewhere in this issue of the Federal Register, the Commission is revoking 16 CFR parts 1508 and 1509, so testing to those regulations will no longer be required. The revocation of those regulations will become effective on June 28, 2011, and so, on that date, we will no longer accept applications from third party conformity assessment bodies for CPSC acceptance to test for conformity with 16 CFR parts 1508 and/or 1509. As stated in part I of this document, the Commission, elsewhere in this issue of the Federal Register, is issuing new standards for full-size and non-full-size baby cribs that will be codified at 16 CFR parts 1219 and 1220, respectively. This notice of requirements is effective on December 28, 2010. The final rule announcing the Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs is effective on June 28, 2011. The effect of these twin publications is that each manufacturer (including the importer) or private labeler of a product subject to 16 CFR parts 1219 or 1220 must have any such product manufactured on or after June 28, 2011, tested by a third party conformity assessment body accredited to do so and must issue a certificate of compliance with 16 CFR parts 1219 or 1220 based on that testing. This notice of requirements is exempt from the notice and comment rulemaking requirements of the Administrative Procedure Act, 5 U.S.C. 553 (see section 14(a)(3)(G) of the CPSA, as added by section 102(a)(2) of the CPSIA (15 U.S.C. 2063(a)(3)(G))). PO 00000 Frm 00026 Fmt 4701 Sfmt 4700 II. Accreditation Requirements A. Baseline Third Party Conformity Assessment Body Accreditation Requirements For a third party conformity assessment body to be accredited to test children’s products for conformity with the test methods identified earlier in part I of this document, it must be accredited by an ILAC–MRA signatory accrediting body, and the accreditation must be registered with, and accepted by, the Commission. A listing of ILAC– MRA signatory accrediting bodies is available on the Internet at https:// ilac.org/membersbycategory.html. The accreditation must be to ISO Standard ISO/IEC 17025:2005, ‘‘General Requirements for the Competence of Testing and Calibration Laboratories,’’ and the scope of the accreditation must expressly include testing to the test method for full-size and/or non-full-size baby cribs included in 16 CFR parts 1219 and/or 1220, Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs. A true copy, in English, of the accreditation and scope documents demonstrating compliance with these requirements must be registered with the Commission electronically. The additional requirements for accreditation of firewalled and governmental conformity assessment bodies are described in parts II.B and II.C of this document below. The Commission will maintain on its Web site an up-to-date listing of third party conformity assessment bodies whose accreditations it has accepted and the scope of each accreditation. Once the Commission adds a third party conformity assessment body to that list, the third party conformity assessment body may commence testing of full-size and/or non-full-size baby cribs to support certification by the manufacturer or private labeler of compliance with the test methods identified earlier in part I of this document. B. Additional Accreditation Requirements for Firewalled Conformity Assessment Bodies In addition to the baseline accreditation requirements in part II.A of this document above, firewalled conformity assessment bodies seeking accredited status must submit to the Commission copies, in English, of their training documents showing how employees are trained to notify the Commission immediately and confidentially of any attempt by the manufacturer, private labeler, or other interested party to hide or exert undue influence over the third party E:\FR\FM\28DER2.SGM 28DER2 Federal Register / Vol. 75, No. 248 / Tuesday, December 28, 2010 / Rules and Regulations emcdonald on DSK2BSOYB1PROD with RULES2 conformity assessment body’s test results. This additional requirement applies to any third party conformity assessment body in which a manufacturer or private labeler of a children’s product to be tested by the third party conformity assessment body owns an interest of ten percent or more. While the Commission is not addressing common parentage of a third party conformity assessment body and a children’s product manufacturer at this time, it will be vigilant to see if this issue needs to be addressed in the future. As required by section 14(f)(2)(D) of the CPSA, the Commission must formally accept, by order, the accreditation application of a third party conformity assessment body before the third party conformity assessment body can become an accredited firewalled conformity assessment body. The Commission’s order must also find that accrediting the firewalled conformity assessment body would provide equal or greater consumer safety protection than the manufacturer’s or private labeler’s use of an independent conformity assessment body. C. Additional Accreditation Requirements for Governmental Conformity Assessment Bodies In addition to the baseline accreditation requirements of part II.A of this document above, the CPSIA permits accreditation of a third party conformity assessment body owned or controlled, in whole or in part, by a government if: • To the extent practicable, manufacturers or private labelers located in any nation are permitted to choose conformity assessment bodies that are not owned or controlled by the government of that nation; • The third party conformity assessment body’s testing results are not subject to undue influence by any other person, including another governmental entity; • The third party conformity assessment body is not accorded more favorable treatment than other third party conformity assessment bodies in the same nation who have been accredited; • The third party conformity assessment body’s testing results are accorded no greater weight by other governmental authorities than those of other accredited third party conformity assessment bodies; and • The third party conformity assessment body does not exercise undue influence over other governmental authorities on matters affecting its operations or on decisions VerDate Mar<15>2010 20:54 Dec 27, 2010 Jkt 223001 81791 by other governmental authorities controlling distribution of products based on outcomes of the third party conformity assessment body’s conformity assessments. The Commission will accept the accreditation of a governmental third party conformity assessment body if it meets the baseline accreditation requirements of part II.A of this document above and meets the additional conditions stated here. To obtain this assurance, CPSC staff will engage the governmental entities relevant to the accreditation request. conformity assessment body electronically of acceptance of its accreditation. All information to support an accreditation acceptance request must be provided in the English language. Once the Commission adds a third party conformity assessment body to the list, the third party conformity assessment body may then begin testing of children’s products to support certification of compliance with the regulations identified earlier in part I of this document for which it has been accredited. III. How does a third party conformity assessment body apply for acceptance of its accreditation? The Commission has established an electronic accreditation acceptance and registration system accessed via the Commission’s Web site at https:// www.cpsc.gov/about/cpsia/ labaccred.html. The applicant provides, in English, basic identifying information concerning its location, the type of accreditation it is seeking, and electronic copies of its ILAC–MRA accreditation certificate and scope statement, and firewalled third party conformity assessment body training document(s), if relevant. Commission staff will review the submission for accuracy and completeness. In the case of baseline third party conformity assessment bodies and government-owned or government-operated conformity assessment bodies, when that review and any necessary discussions with the applicant are satisfactorily completed, the third party conformity assessment body in question is added to the CPSC’s list of accredited third party conformity assessment bodies at https:// www.cpsc.gov/about/cpsia/ labaccred.html. In the case of a firewalled conformity assessment body seeking accredited status, when the staff’s review is complete, the staff transmits its recommendation on accreditation to the Commission for consideration. (A third party conformity assessment body that ultimately may seek acceptance as a firewalled third party conformity assessment body may initially request acceptance as a third party conformity assessment body accredited for testing of children’s products other than those of its owners.) If the Commission accepts a staff recommendation to accredit a firewalled conformity assessment body, the firewalled conformity assessment body then will be added to the CPSC’s list of accredited third party conformity assessment bodies. In each case, the Commission will notify the third party IV. Acceptance of Children’s Product Certifications Based on Third Party Conformity Assessment Body Testing to the New Safety Standards for Full-Size and Non-Full-Size Baby Cribs Prior to Their Effective Date PO 00000 Frm 00027 Fmt 4701 Sfmt 4700 Elsewhere in this issue of the Federal Register, the Commission is publishing new safety standards for full-size and non-full-size baby cribs, which will be codified at 16 CFR parts 1219 and 1220, respectively. The effect of this notice of requirements and the final rule is that each manufacturer (including the importer) or private labeler of a product subject to 16 CFR parts 1219 or 1220 must have any such product manufactured on or after June 28, 2011 tested by a third party conformity assessment body accredited to do so and must issue a certificate of compliance with 16 CFR parts 1219 or 1220 based on that testing. To ease the transition to the new standards and avoid a ‘‘bottlenecking’’ of products at conformity assessment bodies at or near the effective date of 16 CFR parts 1219 and 1220, the Commission will accept certifications based on testing that occurred prior to the effective date of the new standards in certain prescribed circumstances. However, any such testing must comport with all CPSC requirements, including: 1. At the time of product testing, the product 1 was tested by a third party conformity assessment body that was ISO/IEC 17025 accredited by an ILAC– MRA accreditation body at the time of the test. For firewalled conformity assessment bodies, the firewalled conformity assessment body must be one that the Commission has accredited by order at or before the time the product was tested, even if the order did not include the test methods specified in this notice. If the third party 1 The CPSIA requires that certification be based on testing of sufficient samples of the product or samples that are identical in all material respects to the product. E:\FR\FM\28DER2.SGM 28DER2 81792 Federal Register / Vol. 75, No. 248 / Tuesday, December 28, 2010 / Rules and Regulations emcdonald on DSK2BSOYB1PROD with RULES2 conformity assessment body has not been accredited as a firewalled conformity assessment body by a Commission order, the Commission will not accept a certificate of compliance based on testing performed by the third party conformity assessment body before it is accredited, by Commission order, as a firewalled conformity assessment body; VerDate Mar<15>2010 20:54 Dec 27, 2010 Jkt 223001 2. The third party conformity assessment body’s application is accepted by the CPSC by June 28, 2011, as established by the Commission; 3. The test results show compliance with 16 CFR part 1219 or 16 CFR part 1220; 4. The product was tested on or after July 23, 2010 and before June 28, 2011; and 5. The third party conformity assessment body’s accreditation remains PO 00000 Frm 00028 Fmt 4701 Sfmt 9990 in effect through the effective date for mandatory third party testing and manufacturer/private labeler certification for the subject products’ respective regulations. Dated: December 17, 2010. Todd A. Stevenson, Secretary, Consumer Product Safety Commission. [FR Doc. 2010–32180 Filed 12–27–10; 8:45 am] BILLING CODE 6355–01–P E:\FR\FM\28DER2.SGM 28DER2

Agencies

Consumer Product Safety Commission

[Federal Register Volume 75, Number 248 (Tuesday, December 28, 2010)]
[Rules and Regulations]
[Pages 81789-81792]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-32180]


-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

[CPSC Docket No. CPSC-2009-0064]

16 CFR Parts 1219 and 1220


Third Party Testing for Certain Children's Products; Full-Size 
Baby Cribs and Non-Full-Size Baby Cribs: Requirements for Accreditation 
of Third Party Conformity Assessment Bodies

AGENCY: Consumer Product Safety Commission.

ACTION: Notice of requirements.

-----------------------------------------------------------------------

SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) is 
issuing a notice of requirements that provides the criteria and process 
for Commission acceptance of accreditation of third party conformity 
assessment bodies for testing pursuant to specific CPSC regulations 
relating to full-size and non-full-size baby cribs. The Commission is 
issuing this notice of requirements pursuant to section 14(a)(3)(B)(vi) 
of the Consumer Product Safety Act (CPSA) (15 U.S.C. 
2063(a)(3)(B)(vi)).

DATES: Effective Date: The requirements for accreditation of third 
party conformity assessment bodies to assess conformity with 16 CFR 
parts 1219 and/or 1220 are effective December 28, 2010.

FOR FURTHER INFORMATION CONTACT: Robert ``Jay'' Howell, Assistant 
Executive Director for Hazard Identification and Reduction, U.S. 
Consumer Product Safety Commission, 4330 East West Highway, Bethesda, 
Maryland 20814; e-mail rhowell@cpsc.gov.

SUPPLEMENTARY INFORMATION:

I. Introduction

    Section 14(a)(3)(B)(vi) of the CPSA, as added by section 102(a)(2) 
of the Consumer Product Safety Improvement Act of 2008 (CPSIA), Public 
Law 110-314, directs the CPSC to publish a notice of requirements for 
accreditation of third party conformity assessment bodies to assess 
children's products for conformity with ``other children's product 
safety rules.'' Section 14(f)(1) of the CPSA defines ``children's 
product safety rule'' as ``a consumer product safety rule under [the 
CPSA] or similar rule, regulation, standard, or ban under any other Act 
enforced by the Commission, including a rule declaring a consumer 
product to be a banned hazardous product or substance.'' Under section 
14(a)(3)(A) of the CPSA, each manufacturer (including the importer) or 
private labeler of products subject to those regulations must have 
products that are manufactured more than 90 days after the Federal 
Register publication date of a notice of the requirements for 
accreditation, tested by a third party conformity assessment body 
accredited to do so, and must issue a certificate of compliance with 
the applicable regulations based on that testing. Section 14(a)(2) of 
the CPSA, as added by section 102(a)(2) of the CPSIA, requires that 
certification be based on testing of sufficient samples of the product, 
or samples that are identical in all material respects to the product. 
The Commission also emphasizes that, irrespective of certification, the 
product in question must comply with applicable CPSC requirements (see, 
e.g., section 14(h) of the CPSA, as added by section 102(b) of the 
CPSIA).
    This notice provides the criteria and process for Commission 
acceptance of accreditation of third party conformity assessment bodies 
for testing pursuant to safety standards for full-size and non-full-
size baby cribs, which appears elsewhere in this issue of the Federal 
Register. The standards for full-size and non-full-size baby cribs will 
be codified at 16 CFR parts 1219 and 1220 respectively. The standards 
contain the test methods that conformity assessment bodies will use to 
assess full-size and non-full-size baby cribs. The Commission is 
recognizing limited circumstances in which it will accept 
certifications based on product testing conducted before the full-size 
and non-full-size baby crib standards become effective in six months. 
The details regarding those limited circumstances can be found in part 
IV of this document below.
    Although section 14(a)(3)(B)(vi) of the CPSA directs the CPSC to 
publish a notice of requirements for accreditation of third party 
conformity assessment bodies to assess conformity with ``all other 
children's product safety rules,'' this notice of requirements is 
limited to the test methods identified immediately above.
    The CPSC also recognizes that section 14(a)(3)(B)(vi) of the CPSA 
is captioned: ``All Other Children's Product Safety Rules,'' but the 
body of the statutory

[[Page 81790]]

requirement refers only to ``other children's product safety rules.'' 
Nevertheless, section 14(a)(3)(B)(vi) of the CPSA could be construed as 
requiring a notice of requirements for ``all'' other children's product 
safety rules, rather than as a notice of requirements for ``some'' or 
``certain'' children's product safety rules. However, whether a 
particular rule represents a ``children's product safety rule'' may be 
subject to interpretation, and the Commission staff is continuing to 
evaluate which rules, regulations, standards, or bans are ``children's 
product safety rules.'' The CPSC intends to issue additional notices of 
requirements for other rules which the Commission determines to be 
``children's product safety rules.''
    This notice of requirements applies to all third party conformity 
assessment bodies as described in section 14(f)(2) of the CPSA. 
Generally speaking, such third party conformity assessment bodies are: 
(1) Third party conformity assessment bodies that are not owned, 
managed, or controlled by a manufacturer or private labeler of a 
children's product to be tested by the third party conformity 
assessment body for certification purposes; (2) ``firewalled'' 
conformity assessment bodies (those that are owned, managed, or 
controlled by a manufacturer or private labeler of a children's product 
to be tested by the third party conformity assessment body for 
certification purposes and that seek accreditation under the additional 
statutory criteria for ``firewalled'' conformity assessment bodies); 
and (3) third party conformity assessment bodies owned or controlled, 
in whole or in part, by a government.
    The Commission requires baseline accreditation of each category of 
third party conformity assessment body to the International 
Organization for Standardization (ISO)/International Electrotechnical 
Commission (IEC) Standard 17025:2005, ``General Requirements for the 
Competence of Testing and Calibration Laboratories.'' The accreditation 
must be by an accreditation body that is a signatory to the 
International Laboratory Accreditation Cooperation--Mutual Recognition 
Arrangement (ILAC-MRA), and the scope of the accreditation must include 
testing for any of the test methods identified earlier in part I of 
this document for which the third party conformity assessment body 
seeks to be accredited.
    (A description of the history and content of the ILAC-MRA approach 
and of the requirements of the ISO/IEC 17025:2005 laboratory 
accreditation standard is provided in the CPSC staff briefing 
memorandum ``Third Party Conformity Assessment Body Accreditation 
Requirements for Testing Compliance With 16 CFR Part 1501 (Small Parts 
Regulations),'' dated November 2008 and available on the CPSC's Web 
site at https://www.cpsc.gov/library/foia/foia09/brief/smallparts.pdf.)
    The Commission has established an electronic accreditation 
registration and listing system that can be accessed via its Web site 
at https://www.cpsc.gov/about/cpsia/labaccred.html.
    In the Federal Register of October 22, 2008 (73 FR 62965), the 
Commission published a notice of requirements for the accreditation of 
third party conformity assessment bodies to test children's products 
for conformity with the then-existing CPSC regulations for full-size 
baby cribs at 16 CFR part 1508 and for non-full-size baby cribs at 16 
CFR part 1509. Elsewhere in this issue of the Federal Register, the 
Commission is revoking 16 CFR parts 1508 and 1509, so testing to those 
regulations will no longer be required. The revocation of those 
regulations will become effective on June 28, 2011, and so, on that 
date, we will no longer accept applications from third party conformity 
assessment bodies for CPSC acceptance to test for conformity with 16 
CFR parts 1508 and/or 1509.
    As stated in part I of this document, the Commission, elsewhere in 
this issue of the Federal Register, is issuing new standards for full-
size and non-full-size baby cribs that will be codified at 16 CFR parts 
1219 and 1220, respectively. This notice of requirements is effective 
on December 28, 2010. The final rule announcing the Safety Standards 
for Full-Size Baby Cribs and Non-Full-Size Baby Cribs is effective on 
June 28, 2011. The effect of these twin publications is that each 
manufacturer (including the importer) or private labeler of a product 
subject to 16 CFR parts 1219 or 1220 must have any such product 
manufactured on or after June 28, 2011, tested by a third party 
conformity assessment body accredited to do so and must issue a 
certificate of compliance with 16 CFR parts 1219 or 1220 based on that 
testing.
    This notice of requirements is exempt from the notice and comment 
rulemaking requirements of the Administrative Procedure Act, 5 U.S.C. 
553 (see section 14(a)(3)(G) of the CPSA, as added by section 102(a)(2) 
of the CPSIA (15 U.S.C. 2063(a)(3)(G))).

II. Accreditation Requirements

A. Baseline Third Party Conformity Assessment Body Accreditation 
Requirements

    For a third party conformity assessment body to be accredited to 
test children's products for conformity with the test methods 
identified earlier in part I of this document, it must be accredited by 
an ILAC-MRA signatory accrediting body, and the accreditation must be 
registered with, and accepted by, the Commission. A listing of ILAC-MRA 
signatory accrediting bodies is available on the Internet at https://ilac.org/membersbycategory.html. The accreditation must be to ISO 
Standard ISO/IEC 17025:2005, ``General Requirements for the Competence 
of Testing and Calibration Laboratories,'' and the scope of the 
accreditation must expressly include testing to the test method for 
full-size and/or non-full-size baby cribs included in 16 CFR parts 1219 
and/or 1220, Safety Standards for Full-Size Baby Cribs and Non-Full-
Size Baby Cribs. A true copy, in English, of the accreditation and 
scope documents demonstrating compliance with these requirements must 
be registered with the Commission electronically. The additional 
requirements for accreditation of firewalled and governmental 
conformity assessment bodies are described in parts II.B and II.C of 
this document below.
    The Commission will maintain on its Web site an up-to-date listing 
of third party conformity assessment bodies whose accreditations it has 
accepted and the scope of each accreditation. Once the Commission adds 
a third party conformity assessment body to that list, the third party 
conformity assessment body may commence testing of full-size and/or 
non-full-size baby cribs to support certification by the manufacturer 
or private labeler of compliance with the test methods identified 
earlier in part I of this document.

B. Additional Accreditation Requirements for Firewalled Conformity 
Assessment Bodies

    In addition to the baseline accreditation requirements in part II.A 
of this document above, firewalled conformity assessment bodies seeking 
accredited status must submit to the Commission copies, in English, of 
their training documents showing how employees are trained to notify 
the Commission immediately and confidentially of any attempt by the 
manufacturer, private labeler, or other interested party to hide or 
exert undue influence over the third party

[[Page 81791]]

conformity assessment body's test results. This additional requirement 
applies to any third party conformity assessment body in which a 
manufacturer or private labeler of a children's product to be tested by 
the third party conformity assessment body owns an interest of ten 
percent or more. While the Commission is not addressing common 
parentage of a third party conformity assessment body and a children's 
product manufacturer at this time, it will be vigilant to see if this 
issue needs to be addressed in the future.
    As required by section 14(f)(2)(D) of the CPSA, the Commission must 
formally accept, by order, the accreditation application of a third 
party conformity assessment body before the third party conformity 
assessment body can become an accredited firewalled conformity 
assessment body. The Commission's order must also find that accrediting 
the firewalled conformity assessment body would provide equal or 
greater consumer safety protection than the manufacturer's or private 
labeler's use of an independent conformity assessment body.

C. Additional Accreditation Requirements for Governmental Conformity 
Assessment Bodies

    In addition to the baseline accreditation requirements of part II.A 
of this document above, the CPSIA permits accreditation of a third 
party conformity assessment body owned or controlled, in whole or in 
part, by a government if:
     To the extent practicable, manufacturers or private 
labelers located in any nation are permitted to choose conformity 
assessment bodies that are not owned or controlled by the government of 
that nation;
     The third party conformity assessment body's testing 
results are not subject to undue influence by any other person, 
including another governmental entity;
     The third party conformity assessment body is not accorded 
more favorable treatment than other third party conformity assessment 
bodies in the same nation who have been accredited;
     The third party conformity assessment body's testing 
results are accorded no greater weight by other governmental 
authorities than those of other accredited third party conformity 
assessment bodies; and
     The third party conformity assessment body does not 
exercise undue influence over other governmental authorities on matters 
affecting its operations or on decisions by other governmental 
authorities controlling distribution of products based on outcomes of 
the third party conformity assessment body's conformity assessments.
    The Commission will accept the accreditation of a governmental 
third party conformity assessment body if it meets the baseline 
accreditation requirements of part II.A of this document above and 
meets the additional conditions stated here. To obtain this assurance, 
CPSC staff will engage the governmental entities relevant to the 
accreditation request.

III. How does a third party conformity assessment body apply for 
acceptance of its accreditation?

    The Commission has established an electronic accreditation 
acceptance and registration system accessed via the Commission's Web 
site at https://www.cpsc.gov/about/cpsia/labaccred.html. The applicant 
provides, in English, basic identifying information concerning its 
location, the type of accreditation it is seeking, and electronic 
copies of its ILAC-MRA accreditation certificate and scope statement, 
and firewalled third party conformity assessment body training 
document(s), if relevant.
    Commission staff will review the submission for accuracy and 
completeness. In the case of baseline third party conformity assessment 
bodies and government-owned or government-operated conformity 
assessment bodies, when that review and any necessary discussions with 
the applicant are satisfactorily completed, the third party conformity 
assessment body in question is added to the CPSC's list of accredited 
third party conformity assessment bodies at https://www.cpsc.gov/about/cpsia/labaccred.html. In the case of a firewalled conformity assessment 
body seeking accredited status, when the staff's review is complete, 
the staff transmits its recommendation on accreditation to the 
Commission for consideration. (A third party conformity assessment body 
that ultimately may seek acceptance as a firewalled third party 
conformity assessment body may initially request acceptance as a third 
party conformity assessment body accredited for testing of children's 
products other than those of its owners.) If the Commission accepts a 
staff recommendation to accredit a firewalled conformity assessment 
body, the firewalled conformity assessment body then will be added to 
the CPSC's list of accredited third party conformity assessment bodies. 
In each case, the Commission will notify the third party conformity 
assessment body electronically of acceptance of its accreditation. All 
information to support an accreditation acceptance request must be 
provided in the English language.
    Once the Commission adds a third party conformity assessment body 
to the list, the third party conformity assessment body may then begin 
testing of children's products to support certification of compliance 
with the regulations identified earlier in part I of this document for 
which it has been accredited.

IV. Acceptance of Children's Product Certifications Based on Third 
Party Conformity Assessment Body Testing to the New Safety Standards 
for Full-Size and Non-Full-Size Baby Cribs Prior to Their Effective 
Date

    Elsewhere in this issue of the Federal Register, the Commission is 
publishing new safety standards for full-size and non-full-size baby 
cribs, which will be codified at 16 CFR parts 1219 and 1220, 
respectively. The effect of this notice of requirements and the final 
rule is that each manufacturer (including the importer) or private 
labeler of a product subject to 16 CFR parts 1219 or 1220 must have any 
such product manufactured on or after June 28, 2011 tested by a third 
party conformity assessment body accredited to do so and must issue a 
certificate of compliance with 16 CFR parts 1219 or 1220 based on that 
testing.
    To ease the transition to the new standards and avoid a 
``bottlenecking'' of products at conformity assessment bodies at or 
near the effective date of 16 CFR parts 1219 and 1220, the Commission 
will accept certifications based on testing that occurred prior to the 
effective date of the new standards in certain prescribed 
circumstances. However, any such testing must comport with all CPSC 
requirements, including:
    1. At the time of product testing, the product \1\ was tested by a 
third party conformity assessment body that was ISO/IEC 17025 
accredited by an ILAC-MRA accreditation body at the time of the test. 
For firewalled conformity assessment bodies, the firewalled conformity 
assessment body must be one that the Commission has accredited by order 
at or before the time the product was tested, even if the order did not 
include the test methods specified in this notice. If the third party

[[Page 81792]]

conformity assessment body has not been accredited as a firewalled 
conformity assessment body by a Commission order, the Commission will 
not accept a certificate of compliance based on testing performed by 
the third party conformity assessment body before it is accredited, by 
Commission order, as a firewalled conformity assessment body;
---------------------------------------------------------------------------

    \1\ The CPSIA requires that certification be based on testing of 
sufficient samples of the product or samples that are identical in 
all material respects to the product.
---------------------------------------------------------------------------

    2. The third party conformity assessment body's application is 
accepted by the CPSC by June 28, 2011, as established by the 
Commission;
    3. The test results show compliance with 16 CFR part 1219 or 16 CFR 
part 1220;
    4. The product was tested on or after July 23, 2010 and before June 
28, 2011; and
    5. The third party conformity assessment body's accreditation 
remains in effect through the effective date for mandatory third party 
testing and manufacturer/private labeler certification for the subject 
products' respective regulations.

    Dated: December 17, 2010.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. 2010-32180 Filed 12-27-10; 8:45 am]
BILLING CODE 6355-01-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.