Sunshine Act Meetings, 71418 [2010-29597]

Download as PDF mstockstill on DSKH9S0YB1PROD with NOTICES 71418 Federal Register / Vol. 75, No. 225 / Tuesday, November 23, 2010 / Notices 2012. The member will be selected, in accordance with applicable Department of Commerce guidelines, based on his or her ability to advise the Secretary of Commerce on matters relating to the U.S. manufacturing sector, to act as a liaison among the stakeholders represented by the membership and to provide a forum for those stakeholders on current and emerging issues in the manufacturing sector. The Council’s membership shall reflect the diversity of American manufacturing by representing a balanced cross-section of the U.S. manufacturing industry in terms of industry sectors, geographic locations, demographics, and company size, particularly seeking the representation of small- and mediumsized enterprises. Based on the diversity of the manufacturing industry currently represented on the Council for this charter term, the Department particularly is encouraging applicants from the high-tech or bio-tech manufacturing sectors. Additional factors which may be considered in the selection of this Council member includes the candidate’s proven experience in promoting, developing and marketing programs in support of manufacturing industries, job creation in the manufacturing sector, or the candidate’s proven abilities to manage manufacturing organizations. Given the duties and objectives of the Council, the Department particularly seeks applicants who are active manufacturing executives (Chief Executive Officer, President, or a comparable level of responsibility) that are leaders within their local manufacturing communities and industries. Each Council member serves as the representative of a U.S. entity in the manufacturing sector. For the purposes of eligibility, a U.S. entity is defined as a firm incorporated in the United States (or an unincorporated firm with its principal place of business in the United States) that is controlled by U.S. citizens or by another U.S. entity. An entity is not a U.S. entity if 50 percent plus one share of its stock (if a corporation, or a similar ownership interest of an unincorporated entity) is controlled, directly or indirectly, by non-U.S. citizens or non-U.S. entities. The appointment to the Council will be made by the Secretary of Commerce. All Council members serve at the discretion of the Secretary of Commerce. Council members shall serve in a representative capacity, representing the views and interests of their particular subsector within the manufacturing sector. Council members are not Special Government Employees. VerDate Mar<15>2010 18:02 Nov 22, 2010 Jkt 223001 Council members receive no compensation for their participation in Council activities. Members participating in Council meetings and events are responsible for their travel, living and other personal expenses. Meetings are held regularly and not less than annually, usually in Washington, DC. Members are required to attend a majority of the Council’s meetings. The current Council met initially on October 14, 2010 in Washington, DC. The next meeting is scheduled to take place in January 2011. To be considered for membership, please provide the following: 1. Name and title of the individual requesting consideration. A sponsor letter from the applicant on his or her entity’s letterhead or, if the applicant is to represent an entity other than his or her employer, a letter from the entity to be represented, containing a brief statement of why the applicant should be considered for membership on the Council. This sponsor letter should also address the applicant’s manufacturingrelated experience, including any manufacturing trade policy experience. The applicant’s personal resume. An affirmative statement that the applicant meets all eligibility criteria. 2. An affirmative statement that the applicant is not required to register as a foreign agent under the Foreign Agents Registration Act of 1938, as amended. An affirmative statement that the applicant is not a federally registered lobbyist, and that the applicant understands that, if appointed, the applicant will not be allowed to continue to serve as a Council member if the applicant becomes a federally registered lobbyist. Information regarding the control of the entity to be represented, including the governing structure and stock holdings, as appropriate, signifying compliance with the criteria set forth above. 3. The entity’s size and ownership, product or service line and major markets in which the entity operates. Please include all relevant contact information such as mailing address, fax, e-mail, phone number, and support staff information where relevant. Dated: November 18, 2010. Jennifer Pilat, Executive Secretary, The Manufacturing Council. [FR Doc. 2010–29505 Filed 11–22–10; 8:45 am] BILLING CODE 3510–DR–P PO 00000 CONSUMER PRODUCT SAFETY COMMISSION Sunshine Act Meetings FEDERAL REGISTER CITATION OF PREVIOUS ANNOUNCEMENT: Vol. 75, No. 219, Monday, November 15, 2010, page 69640. ANNOUNCED TIME AND DATE OF MEETING: 9 a.m.–12 Noon, Wednesday November 17, 2010. Meeting Rescheduled to 9 a.m.–12 Noon, Wednesday November 24, 2010. For a recorded message containing the latest agenda information, call (301) 504–7948. CHANGES TO MEETING: CONTACT PERSON FOR ADDITIONAL INFORMATION: Todd A. Stevenson, Office of the Secretary, 4330 East West Highway, Bethesda, MD 20814 (301) 504–7923. Dated: November 17, 2010. Todd A. Stevenson, Secretary. [FR Doc. 2010–29597 Filed 11–19–10; 11:15 am] BILLING CODE 6355–01–P CONSUMER PRODUCT SAFETY COMMISSION Sunshine Act Meeting Notice Wednesday, November 24, 2010, 9 a.m.–12 Noon. TIME AND DATE: Hearing Room 420, Bethesda Towers, 4330 East West Highway, Bethesda, Maryland. PLACE: Commission Meeting—Open to the Public. STATUS: Matter To Be Considered Decisional Matter: Publically Available Consumer Product Safety Information Database—Final Rule. A live webcast of the Meeting can be viewed at https://www.cpsc.gov/webcast. For a recorded message containing the latest agenda information, call (301) 504–7948. CONTACT PERSON FOR MORE INFORMATION: Todd A. Stevenson, Office of the Secretary, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814, (301) 504–7923. Dated: November 17, 2010. Todd A. Stevenson, Secretary. [FR Doc. 2010–29598 Filed 11–19–10; 11:15 am] BILLING CODE 6355–01–P Frm 00007 Fmt 4703 Sfmt 9990 E:\FR\FM\23NON1.SGM 23NON1

Agencies

[Federal Register Volume 75, Number 225 (Tuesday, November 23, 2010)]
[Notices]
[Page 71418]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-29597]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION


Sunshine Act Meetings

Federal Register Citation of Previous Announcement: Vol. 75, No. 219, 
Monday, November 15, 2010, page 69640.

Announced Time and Date of Meeting:  9 a.m.-12 Noon, Wednesday November 
17, 2010.

Changes to Meeting:  Meeting Rescheduled to 9 a.m.-12 Noon, Wednesday 
November 24, 2010.
    For a recorded message containing the latest agenda information, 
call (301) 504-7948.

Contact Person for Additional Information:  Todd A. Stevenson, Office 
of the Secretary, 4330 East West Highway, Bethesda, MD 20814 (301) 504-
7923.

    Dated: November 17, 2010.
Todd A. Stevenson,
Secretary.
[FR Doc. 2010-29597 Filed 11-19-10; 11:15 am]
BILLING CODE 6355-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.