Approval for Expanded Manufacturing Authority; Foreign-Trade Subzone 33E; DNP IMS America Corporation (Thermal Transfer Ribbon Printer Roll Manufacturing); Mount Pleasant, PA, 64694 [2010-26416]

Download as PDF 64694 Federal Register / Vol. 75, No. 202 / Wednesday, October 20, 2010 / Notices Dated: October 14, 2010. Susan K. Fawcett, Records Officer, USPTO, Office of the Chief Information Officer. [FR Doc. 2010–26376 Filed 10–19–10; 8:45 am] BILLING CODE 3510–16–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket 59–2010] emcdonald on DSK2BSOYB1PROD with NOTICES Proposed Foreign-Trade Zone— Greenup and Boyd Counties, Kentucky; Application and Public Hearing An application has been submitted to the Foreign-Trade Zones Board (the Board) by the Greenup Boyd Riverport Authority to establish a general-purpose foreign-trade zone in Greenup and Boyd Counties, Kentucky, adjacent to the Charleston CBP port of entry. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the Board (15 CFR part 400). It was formally filed on October 15, 2010. The applicant is authorized to make the proposal under the Kentucky Revised Statutes section 65.530. The proposed zone would consist of one site covering 64 acres in Greenup County, Kentucky: Proposed Site 1 (64 acres)—Greenup Boyd Riverport Site located at 215 Pier One Drive, Wurtland. The site is owned by the Greenup Boyd Riverport Authority, Greenup and Boyd County Fiscal Courts, and Great Lakes Minerals, LLC. The application indicates a need for zone services in the Greenup and Boyd Counties, Kentucky, area. Several firms have indicated an interest in using zone procedures for warehousing/distribution activities for a variety of products. Specific manufacturing approvals are not being sought at this time. Such requests would be made to the Board on a case-by-case basis. In accordance with the Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to evaluate and analyze the facts and information presented in the application and case record and to report findings and recommendations to the Board. As part of the investigation, the Commerce examiner will hold a public hearing on November 5, 2010 at 9 a.m., at the Fiscal Court Room, beside the Greenup County Courthouse on Main Street, Greenup, Kentucky. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the VerDate Mar<15>2010 17:17 Oct 19, 2010 Jkt 223001 Board’s Executive Secretary at the address below. The closing period for their receipt is December 20, 2010. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to January 3, 2011. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 2111, U.S. Department of Commerce, 1401 Constitution Avenue, NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via https:// www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. The application to expand the scope of manufacturing authority under zone procedures to include activity related to thermal transfer ribbon printer roll manufacturing within Subzone 33E, as described in the application and Federal Register notice, is approved, subject to the FTZ Act and the Board’s regulations, including Section 400.28. Signed at Washington, DC, this 7th day of October 2010. Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration, Alternate Chairman, ForeignTrade Zones Board. Attest: Andrew McGilvray, Executive Secretary. [FR Doc. 2010–26416 Filed 10–19–10; 8:45 am] BILLING CODE 3510–DS–P Dated: October 15, 2010. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE [FR Doc. 2010–26420 Filed 10–19–10; 8:45 am] [A–570–905] International Trade Administration BILLING CODE P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1715] Approval for Expanded Manufacturing Authority; Foreign-Trade Subzone 33E; DNP IMS America Corporation (Thermal Transfer Ribbon Printer Roll Manufacturing); Mount Pleasant, PA Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a-81u), the ForeignTrade Zones Board (the Board) adopts the following Order: Whereas, the Regional Industrial Development Corporation of Southwestern Pennsylvania, grantee of FTZ 33, has requested an expansion of the scope of manufacturing authority on behalf of DNP IMS America Corporation (DNP), within Subzone 33E in Mount Pleasant, Pennsylvania, (FTZ Docket 9– 2010, filed 2/4/2010); Whereas, notice inviting public comment has been given in the Federal Register (75 FR 6635–6636, 2/10/2010) and the application has been processed pursuant to the FTZ Act and the Board’s regulations; and, Whereas, the Board adopts the findings and recommendations of the examiner’s report, and finds that the requirements of the FTZ Act and Board’s regulations are satisfied, and that the proposal is in the public interest; Now, therefore, the Board hereby orders: PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 Second Antidumping Duty Administrative Review of Certain Polyester Staple Fiber From the People’s Republic of China: Extension of Time Limit for the Final Results Agency: Import Administration, International Trade Administration, Department of Commerce. Dates: Effective Date: October 20, 2010. For Further Information Contact: Steven Hampton or Jerry Huang, AD/ CVD Operations, Office 9, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482–0116 or (202) 482– 4047, respectively. Background On July 14, 2010, the Department of Commerce (‘‘Department’’) published in the Federal Register the Preliminary Results of the second administrative review of certain polyester staple fiber (‘‘PSF’’) from the People’s Republic of China (‘‘PRC’’), covering the period June 1, 2008–May 31, 2009. Certain Polyester Staple Fiber From the People’s Republic of China: Notice of Preliminary Results and Preliminary Rescission, in Part, of the Antidumping Duty Administrative Review, 75 FR 40777 (July 14, 2010) (‘‘Preliminary Results’’). Extension of Time Limit for the Preliminary Results Section 751(a)(3)(A) of the Tariff Act of 1930, as amended (‘‘the Act’’), requires the Department to issue the E:\FR\FM\20OCN1.SGM 20OCN1

Agencies

[Federal Register Volume 75, Number 202 (Wednesday, October 20, 2010)]
[Notices]
[Page 64694]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-26416]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[Order No. 1715]


Approval for Expanded Manufacturing Authority; Foreign-Trade 
Subzone 33E; DNP IMS America Corporation (Thermal Transfer Ribbon 
Printer Roll Manufacturing); Mount Pleasant, PA

    Pursuant to its authority under the Foreign-Trade Zones Act of 
June 18, 1934, as amended (19 U.S.C. 81a-81u), the Foreign-Trade 
Zones Board (the Board) adopts the following Order:

    Whereas, the Regional Industrial Development Corporation of 
Southwestern Pennsylvania, grantee of FTZ 33, has requested an 
expansion of the scope of manufacturing authority on behalf of DNP IMS 
America Corporation (DNP), within Subzone 33E in Mount Pleasant, 
Pennsylvania, (FTZ Docket 9-2010, filed 2/4/2010);
    Whereas, notice inviting public comment has been given in the 
Federal Register (75 FR 6635-6636, 2/10/2010) and the application has 
been processed pursuant to the FTZ Act and the Board's regulations; 
and,
    Whereas, the Board adopts the findings and recommendations of the 
examiner's report, and finds that the requirements of the FTZ Act and 
Board's regulations are satisfied, and that the proposal is in the 
public interest;
    Now, therefore, the Board hereby orders:
    The application to expand the scope of manufacturing authority 
under zone procedures to include activity related to thermal transfer 
ribbon printer roll manufacturing within Subzone 33E, as described in 
the application and Federal Register notice, is approved, subject to 
the FTZ Act and the Board's regulations, including Section 400.28.

    Signed at Washington, DC, this 7th day of October 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration, Alternate 
Chairman, Foreign-Trade Zones Board.
Attest:
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2010-26416 Filed 10-19-10; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.