Certain New Chemicals; Receipt and Status Information, 60444-60447 [2010-24570]
Download as PDF
<![CDATA[
60444
Federal Register / Vol. 75, No. 189 / Thursday, September 30, 2010 / Notices
Web site that enables subscribers to
receive e-mail notification when a
document is added to a subscribed
docket(s). For assistance with any FERC
Online service, please e-mail
FERCOnlineSupport@ferc.gov, or call
(866) 208–3676 (toll free). For TTY, call
(202) 502–8659.
Comment Date: October 5, 2010.
Kimberly D. Bose,
Secretary.
[FR Doc. 2010–24512 Filed 9–29–10; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
[Docket No. ER10–2774–000]
Arizona Solar One LLC; Supplemental
Notice That Initial Market-Based Rate
Filing Includes Request for Blanket
Section 204 Authorization
mstockstill on DSKH9S0YB1PROD with NOTICES6
September 23, 2010.
This is a supplemental notice in the
above-referenced proceeding of Arizona
Solar One LLC’s application for marketbased rate authority, with an
accompanying rate tariff, noting that
such application includes a request for
blanket authorization, under 18 CFR
Part 34, of future issuances of securities
and assumptions of liability.
Any person desiring to intervene or to
protest should file with the Federal
Energy Regulatory Commission, 888
First Street, NE., Washington, DC 20426,
in accordance with Rules 211 and 214
of the Commission’s Rules of Practice
and Procedure (18 CFR 385.211 and
§ 385.214). Anyone filing a motion to
intervene or protest must serve a copy
of that document on the Applicant.
Notice is hereby given that the
deadline for filing protests with regard
to the applicant’s request for blanket
authorization, under 18 CFR Part 34, of
future issuances of securities and
assumptions of liability, is October 13,
2010.
The Commission encourages
electronic submission of protests and
interventions in lieu of paper, using the
FERC Online links at https://
www.ferc.gov. To facilitate electronic
service, persons with Internet access
who will eFile a document and/or be
listed as a contact for an intervenor
must create and validate an
eRegistration account using the
eRegistration link. Select the eFiling
link to log on and submit the
intervention or protests.
Persons unable to file electronically
should submit an original and 14 copies
VerDate Mar<15>2010
17:48 Sep 29, 2010
Jkt 220001
of the intervention or protest to the
Federal Energy Regulatory Commission,
888 First Street, NE., Washington, DC
20426.
The filings in the above-referenced
proceeding are accessible in the
Commission’s eLibrary system by
clicking on the appropriate link in the
above list. They are also available for
review in the Commission’s Public
Reference Room in Washington, DC.
There is an eSubscription link on the
Web site that enables subscribers to
receive e-mail notification when a
document is added to a subscribed
dockets(s). For assistance with any
FERC Online service, please e-mail
FERCOnlineSupport@ferc.gov. or call
(866) 208–3676 (toll free). For TTY, call
(202) 502–8659.
Kimberly D. Bose,
Secretary.
[FR Doc. 2010–24511 Filed 9–29–10; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2010–0825 FRL–8849–4]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TMEs), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from September 1,
2010, to September 17, 2010, consists of
the PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TMEs number,
must be received on or before November
1, 2010.
SUMMARY:
PO 00000
Frm 00041
Fmt 4703
Sfmt 4703
Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2010–0825, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2010–0825.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2010–0825. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket
are listed in the docket index available
at https://www.regulations.gov. Although
listed in the index, some information is
ADDRESSES:
E:\FR\FM\30SEN1.SGM
30SEN1
Federal Register / Vol. 75, No. 189 / Thursday, September 30, 2010 / Notices
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
legal holidays. The telephone number of
the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Bernice
Mudd, Information Management
Division 7407M, Office of Chemical
Safety Pollution Prevention,
Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington,
DC 20460–0001; telephone number:
(202) 564–8951; fax number: (202) 564–
8955; e-mail address:
mudd.bernice@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
60445
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
B. What Should I Consider as I Prepare
My Comments for EPA?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TMEs and to
publish periodic status reports on the
chemicals under review and the receipt
of notices of commencement to
manufacture those chemicals. This
status report, which covers the period
from September 1, 2010, to September
17, 2010, consists of the PMNs and
TMEs, both pending or expired, and the
notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
II. Why is EPA Taking this Action?
III. Receipt and Status Report for PMNs
and TMEs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
mstockstill on DSKH9S0YB1PROD with NOTICES6
I. 30 PREMANUFACTURE NOTICES RECEIVED FROM: 9/01/10 TO 9/17/10
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Styrene-maleic anhydride copolymer, reaction product with amino
compounds.
(G) Styrene-maleic anhydride copolymer, reaction product with amino
compounds.
P–10–0536
09/01/10
11/29/10
CBI
(G) Additive, open, non-dispersive
use
P–10–0537
09/01/10
11/29/10
CBI
(G) Additive, open, non-dispersive
use
VerDate Mar<15>2010
17:48 Sep 29, 2010
Jkt 220001
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
E:\FR\FM\30SEN1.SGM
30SEN1
60446
Federal Register / Vol. 75, No. 189 / Thursday, September 30, 2010 / Notices
I. 30 PREMANUFACTURE NOTICES RECEIVED FROM: 9/01/10 TO 9/17/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
09/02/10
11/30/10
Cytec Industries Inc.
(G) Coating resin
P–10–0542
09/07/10
12/05/10
CBI
P–10–0543
09/07/10
12/05/10
CBI
(G) Used as an ingredient in manufacture of a polymer (binder) meant
to adhere glass fibers together.
(G) Material for electronic parts
P–10–0544
09/08/10
12/06/10
Henkel Corporation
(S) Catalyst for thermoset resins used
for electronics encapsulation
P–10–0545
09/09/10
12/07/10
CBI
P–10–0546
09/09/10
12/07/10
CBI
P–10–0547
P–10–0548
P–10–0549
P–10–0550
09/09/10
09/09/10
09/09/10
09/09/10
12/07/10
12/07/10
12/07/10
12/07/10
CBI
CBI
CBI
CBI
(G) Battery electrode component,
contained use
(G) Battery electrode component,
contained use
(G) Chemical intermediate
(G) Chemical intermediate
(G) Chemical intermediate
(G) Chemical intermediate
P–10–0551
P–10–0552
P–10–0553
P–10–0554
P–10–0555
P–10–0556
09/09/10
09/09/10
09/09/10
09/09/10
09/09/10
09/13/10
12/07/10
12/07/10
12/07/10
12/07/10
12/07/10
12/11/10
CBI
CBI
CBI
CBI
CBI
CBI
(G) Chemical intermediate
(G) Chemical intermediate
(G) Lubricant additive, dispersive use
(G) Chemical intermediate
(G) Chemical intermediate
(G) Latent curing agent in polyurethane adhesives
P–10–0557
P–10–0558
09/09/10
09/09/10
12/07/10
12/07/10
CBI
Dow Chemical Company
P–10–0559
09/09/10
12/07/10
Dow Chemical Company
P–10–0560
09/09/10
12/07/10
Dow Chemical Company
P–10–0561
09/09/10
12/07/10
Dow Chemical Company
P–10–0562
09/14/10
12/12/10
CBI
(G) Chemical intermediate
(S) Component for construction
sealants; component for transportation adhesive
(S) Component for construction
sealants; component for transportation adhesive
(S) Component for construction
sealants; component for transportation adhesive
(S) Component for construction
sealants; component for transportation adhesive
(G) Coating hardner
P–10–0563
P–10–0564
09/14/10
09/14/10
12/12/10
12/12/10
CBI
Cytec Industries Inc.
(G) Curing agent
(G) Wood stain
P–10–0565
P–10–0566
09/15/10
09/16/10
12/13/10
12/14/10
CBI
CBI
P–10–0567
mstockstill on DSKH9S0YB1PROD with NOTICES6
P–10–0541
09/16/10
12/14/10
CBI
(G) Adhesive and sealant
(S) Hardener for epoxy resin adhesive system
(G) Solvent
P–10–0568
09/17/10
12/15/10
CBI
(G) Filler-paste resin component
In Table II of this unit, EPA provides
the following information (to the extent
VerDate Mar<15>2010
17:48 Sep 29, 2010
Jkt 220001
Chemical
(G) Epoxy modified alkyd resin, partially neutralized.
(G) Amide, polyprotic acid.
(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidyne
polycarbomonocycle.
(S)
2,6-cyclohexadiene-1,4-dione,
compound with triphenylphosphine
(1:1).
(G) Modified lithium iron phosphate.
(G) Modified lithium iron phosphate.
(G) Vegetable oil, modified products.
(G) Vegetable oil, modified products.
(G) Vegetable oil, modified products.
(G) Vegetable oil, modified products,
esters.
(G) Olefins.
(G) Olefins.
(G) Olefins.
(G) Esters.
(G) Esters.
(S) Poly[oxy(methyl-1,2-ethanediyl)],
.alpha.-[2-[[2,2-dimethyl-3-[(1oxododecyl)oxy]propylidene]
amino]methylethyl]-.omega.-[2-[[2,2dimethyl-3-[(1-oxododecyl)oxy]
propylidene]amino]methylethoxy]-.
(G) Aromatic polyester.
(G) Silyl-modified polymer.
(G) Silyl-modified polymer.
(G) Silyl-modified polymer.
(G) Silyl-modified polymer.
(G) Alkyl methacrylates, polymer with
alkyl
acrylates,
styrene,
hydroxyalkyl
methacrylates,
epoxypropyl
acrylates
and
polyalkene glycol hydrogen sulfate,
alkyloxyalkyl alkenyloxy alkyl, ammonium salt.
(G) Cycloalkylamine.
(G) Maleated fatty oil, substituted
alkanoic acid ester, ester with polyethylene glycol, compounds with
alkyl alkanol amine.
(G) Oxirane polymer with isocyanate.
(S) Benzoic acid, 2-hydroxy-, reaction
products with triethylenetetramine.
(G) Alkanamide, 2-hydroxy-N,N-dimethyl.
(G) Unsaturated polyester resin.
that such information is not claimed as
CBI) on the TMEs received:
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
E:\FR\FM\30SEN1.SGM
30SEN1
Federal Register / Vol. 75, No. 189 / Thursday, September 30, 2010 / Notices
60447
II. 2 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 09/01/10 TO 09/17/10
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
T–10–0007
09/02/10
10/16/10
Cytec Industries Inc.
(G) Coating resin
T–10–0008
09/14/10
10/28/10
Cytec Industries Inc.
Chemical
(G) Wood stain
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
(G) Epoxy modified alkyd resin, partially neutralized.
(G) Maleated fatty oil, substituted
alkanoic acid ester, ester with polyethylene glycol, compounds with
alkyl alkanol amine.
CBI) on the Notices of Commencement
to manufacture received:
II. 15 NOTICES OF COMMENCEMENT FROM: 09/01/10 TO 09/17/10
Case No.
Commencement
Notice End Date
Received Date
P–05–0122
P–05–0123
P–07–0387
09/08/10
09/08/10
09/09/10
08/16/10
08/13/10
08/06/10
P–08–0507
P–08–0706
09/03/10
09/03/10
08/13/10
08/30/10
P–10–0180
09/14/10
09/08/10
P–10–0222
P–10–0248
P–10–0253
P–10–0318
P–10–0341
P–10–0357
P–10–0365
09/01/10
09/02/10
09/14/10
09/14/10
09/15/10
09/09/10
09/17/10
08/27/10
08/10/10
08/31/10
08/16/10
08/19/10
08/30/10
08/19/10
P–10–0377
P–10–0392
09/02/10
09/14/10
08/31/10
08/23/10
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: September 23, 2010.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2010–24570 Filed 9–29–10; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2010–0823; FRL–8849–5]
mstockstill on DSKH9S0YB1PROD with NOTICES6
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
SUMMARY:
VerDate Mar<15>2010
17:48 Sep 29, 2010
Jkt 220001
Chemical
(G) Alkylpolyoxyalkylenesulfosuccinimate.
(G) Alkylpolyoxyalkyleneamide.
(G) Polydimethylsiloxane hydroxyalkyl terminated, polymers with diisocyanate
and aminoalkyl groups aliphatic amine blocked.
(G) Aromatic polyester polyether polyurethane.
(G) Amides, from C18-unsaturated fatty acid dimers, aliphatic polyamines, aliphatic polyamine N-benzyl derivatives and tall-oil fatty acids.
(G) Alkanediamines polymer with 1,6-diisocyanatohexane, 1h-imidazole-1propanamine -blocked.
(G) Alkyltin halide.
(G) Alcohol ammonium sulfate.
(G) Methacrylate ester capped aromatic ether polymer.
(G) Propylene oxide ligand.
(G) Polyether polycarbodiimide.
(G) Zinc alkyl dithiophosphate.
(S) Extractives and their physically modified derivatives Santalum
austrocaledonicum. Oils, Santalum austrocaledonicum.
(S) Phenol, 4,4′-(1-methylethylidene)bis[2-(2-propen-1-yl)-, 1,1′-diacetate.
(G) Dispersion copolymer of styrene-butadiene-isobornyl acrylate.
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from June 21, 2010 to
June 30, 2010, consists of the PMNs and
TME, both pending or expired, and the
notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before November
1, 2010.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
number EPA–HQ–OPPT–2010–0823, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2010–0823.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2010–0823. EPA’s policy is that all
E:\FR\FM\30SEN1.SGM
30SEN1
]]>Agencies
[Federal Register Volume 75, Number 189 (Thursday, September 30, 2010)]
[Notices]
[Pages 60444-60447]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-24570]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2010-0825 FRL-8849-4]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TMEs), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from September 1, 2010, to September 17, 2010, consists of the
PMNs and TMEs, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TMEs number,
must be received on or before November 1, 2010.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2010-0825, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of
Pollution Prevention and Toxics (OPPT), Environmental Protection
Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2010-0825. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2010-0825. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index
available at https://www.regulations.gov. Although listed in the index,
some information is
[[Page 60445]]
not publicly available, e.g., CBI or other information whose disclosure
is restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at https://www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding legal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division 7407M, Office of Chemical
Safety Pollution Prevention, Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; fax number: (202) 564-8955; e-mail address:
mudd.bernice@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TMEs and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from September 1, 2010, to September
17, 2010, consists of the PMNs and TMEs, both pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 30 Premanufacture Notices Received From: 9/01/10 to 9/17/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-10-0536 09/01/10 11/29/10 CBI (G) Additive, open, (G) Styrene-maleic
non-dispersive use anhydride copolymer,
reaction product
with amino
compounds.
P-10-0537 09/01/10 11/29/10 CBI (G) Additive, open, (G) Styrene-maleic
non-dispersive use anhydride copolymer,
reaction product
with amino
compounds.
[[Page 60446]]
P-10-0541 09/02/10 11/30/10 Cytec Industries Inc. (G) Coating resin (G) Epoxy modified
alkyd resin,
partially
neutralized.
P-10-0542 09/07/10 12/05/10 CBI (G) Used as an (G) Amide, polyprotic
ingredient in acid.
manufacture of a
polymer (binder)
meant to adhere
glass fibers
together.
P-10-0543 09/07/10 12/05/10 CBI (G) Material for (G) Substituted
electronic parts polyhydro-oxo-
naphthalene
sulfonate with
alkylidyne
polycarbomonocycle.
P-10-0544 09/08/10 12/06/10 Henkel Corporation (S) Catalyst for (S) 2,6-
thermoset resins cyclohexadiene-1,4-
used for electronics dione, compound with
encapsulation triphenylphosphine
(1:1).
P-10-0545 09/09/10 12/07/10 CBI (G) Battery electrode (G) Modified lithium
component, contained iron phosphate.
use
P-10-0546 09/09/10 12/07/10 CBI (G) Battery electrode (G) Modified lithium
component, contained iron phosphate.
use
P-10-0547 09/09/10 12/07/10 CBI (G) Chemical (G) Vegetable oil,
intermediate modified products.
P-10-0548 09/09/10 12/07/10 CBI (G) Chemical (G) Vegetable oil,
intermediate modified products.
P-10-0549 09/09/10 12/07/10 CBI (G) Chemical (G) Vegetable oil,
intermediate modified products.
P-10-0550 09/09/10 12/07/10 CBI (G) Chemical (G) Vegetable oil,
intermediate modified products,
esters.
P-10-0551 09/09/10 12/07/10 CBI (G) Chemical (G) Olefins.
intermediate
P-10-0552 09/09/10 12/07/10 CBI (G) Chemical (G) Olefins.
intermediate
P-10-0553 09/09/10 12/07/10 CBI (G) Lubricant (G) Olefins.
additive, dispersive
use
P-10-0554 09/09/10 12/07/10 CBI (G) Chemical (G) Esters.
intermediate
P-10-0555 09/09/10 12/07/10 CBI (G) Chemical (G) Esters.
intermediate
P-10-0556 09/13/10 12/11/10 CBI (G) Latent curing (S) Poly[oxy(methyl-
agent in 1,2-ethanediyl)],
polyurethane .alpha.-[2-[[2,2-
adhesives dimethyl-3-[(1-
oxododecyl)oxy]propy
lidene]
amino]methylethyl]-
.omega.-[2-[[2,2-
dimethyl-3-[(1-
oxododecyl)oxy]propy
lidene]amino]methyle
thoxy]-.
P-10-0557 09/09/10 12/07/10 CBI (G) Chemical (G) Aromatic
intermediate polyester.
P-10-0558 09/09/10 12/07/10 Dow Chemical Company (S) Component for (G) Silyl-modified
construction polymer.
sealants; component
for transportation
adhesive
P-10-0559 09/09/10 12/07/10 Dow Chemical Company (S) Component for (G) Silyl-modified
construction polymer.
sealants; component
for transportation
adhesive
P-10-0560 09/09/10 12/07/10 Dow Chemical Company (S) Component for (G) Silyl-modified
construction polymer.
sealants; component
for transportation
adhesive
P-10-0561 09/09/10 12/07/10 Dow Chemical Company (S) Component for (G) Silyl-modified
construction polymer.
sealants; component
for transportation
adhesive
P-10-0562 09/14/10 12/12/10 CBI (G) Coating hardner (G) Alkyl
methacrylates,
polymer with alkyl
acrylates, styrene,
hydroxyalkyl
methacrylates,
epoxypropyl
acrylates and
polyalkene glycol
hydrogen sulfate,
alkyloxyalkyl
alkenyloxy alkyl,
ammonium salt.
P-10-0563 09/14/10 12/12/10 CBI (G) Curing agent (G) Cycloalkylamine.
P-10-0564 09/14/10 12/12/10 Cytec Industries Inc. (G) Wood stain (G) Maleated fatty
oil, substituted
alkanoic acid ester,
ester with
polyethylene glycol,
compounds with alkyl
alkanol amine.
P-10-0565 09/15/10 12/13/10 CBI (G) Adhesive and (G) Oxirane polymer
sealant with isocyanate.
P-10-0566 09/16/10 12/14/10 CBI (S) Hardener for (S) Benzoic acid, 2-
epoxy resin adhesive hydroxy-, reaction
system products with
triethylenetetramine
.
P-10-0567 09/16/10 12/14/10 CBI (G) Solvent (G) Alkanamide, 2-
hydroxy-N,N-
dimethyl.
P-10-0568 09/17/10 12/15/10 CBI (G) Filler-paste (G) Unsaturated
resin component polyester resin.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
[[Page 60447]]
II. 2 Test Marketing Exemption Notices Received From: 09/01/10 to 09/17/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-10-0007 09/02/10 10/16/10 Cytec Industries Inc. (G) Coating resin (G) Epoxy modified
alkyd resin,
partially
neutralized.
T-10-0008 09/14/10 10/28/10 Cytec Industries Inc. (G) Wood stain (G) Maleated fatty
oil, substituted
alkanoic acid ester,
ester with
polyethylene glycol,
compounds with alkyl
alkanol amine.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 15 Notices of Commencement From: 09/01/10 to 09/17/10
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-05-0122 09/08/10 08/16/10 (G)
Alkylpolyoxyalkylenesulfo
succinimate.
P-05-0123 09/08/10 08/13/10 (G)
Alkylpolyoxyalkyleneamide
.
P-07-0387 09/09/10 08/06/10 (G) Polydimethylsiloxane
hydroxyalkyl terminated,
polymers with
diisocyanate and
aminoalkyl groups
aliphatic amine blocked.
P-08-0507 09/03/10 08/13/10 (G) Aromatic polyester
polyether polyurethane.
P-08-0706 09/03/10 08/30/10 (G) Amides, from C18-
unsaturated fatty acid
dimers, aliphatic
polyamines, aliphatic
polyamine N-benzyl
derivatives and tall-oil
fatty acids.
P-10-0180 09/14/10 09/08/10 (G) Alkanediamines polymer
with 1,6-
diisocyanatohexane, 1h-
imidazole-1-propanamine -
blocked.
P-10-0222 09/01/10 08/27/10 (G) Alkyltin halide.
P-10-0248 09/02/10 08/10/10 (G) Alcohol ammonium
sulfate.
P-10-0253 09/14/10 08/31/10 (G) Methacrylate ester
capped aromatic ether
polymer.
P-10-0318 09/14/10 08/16/10 (G) Propylene oxide
ligand.
P-10-0341 09/15/10 08/19/10 (G) Polyether
polycarbodiimide.
P-10-0357 09/09/10 08/30/10 (G) Zinc alkyl
dithiophosphate.
P-10-0365 09/17/10 08/19/10 (S) Extractives and their
physically modified
derivatives Santalum
austrocaledonicum. Oils,
Santalum
austrocaledonicum.
P-10-0377 09/02/10 08/31/10 (S) Phenol, 4,4'-(1-
methylethylidene)bis[2-(2-
propen-1-yl)-, 1,1'-
diacetate.
P-10-0392 09/14/10 08/23/10 (G) Dispersion copolymer
of styrene-butadiene-
isobornyl acrylate.
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: September 23, 2010.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2010-24570 Filed 9-29-10; 8:45 am]
BILLING CODE 6560-50-S
