Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 38988-38989 [2010-16449]

Download as PDF 38988 Federal Register / Vol. 75, No. 129 / Wednesday, July 7, 2010 / Notices This initiation and notice are in accordance with section 751(a)(2)(B) of the Act and 19 CFR 351.214 and 351.221(c)(1)(i). Dated: June 30, 2010. John M. Andersen, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2010–16506 Filed 7–6–10; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648–XV90 Marine Mammals; File No. 14636 AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice; issuance of permit. SUMMARY: Notice is hereby given that Daniel P. Costa, Ph.D., University of California at Santa Cruz, Long Marine Laboratory, 100 Shaffer Road, Santa Cruz, CA has been issued a permit to conduct research on northern elephant seals (Mirounga angustirostris). ADDRESSES: The permit and related documents are available for review upon written request or by appointment in the following office(s): Permits, Conservation and Education Division, Office of Protected Resources, NMFS, 1315 East-West Highway, Room 13705, Silver Spring, MD 20910; phone (301)713–2289; fax (301)713–0376; and Southwest Region, NMFS, 501 West Ocean Blvd., Suite 4200, Long Beach, CA 90802–4213; phone (562)980–4001; fax (562)980–4018. FOR FURTHER INFORMATION CONTACT: Amy Sloan or Tammy Adams, (301)713–2289. SUPPLEMENTARY INFORMATION: On April 20, 2010, notice was published in the Federal Register (75 FR 20565) that a request for a permit to conduct research on the species identified above had been submitted by the above-named applicant. The requested permit has been issued under the authority of the Marine Mammal Protection Act of 1972, as amended (16 U.S.C. 1361 et seq.), and the regulations governing the taking and importing of marine mammals (50 CFR part 216). The permit authorizes Dr. Costa to continue long-term studies on northern elephant seals in California, including population growth and status, reproductive strategies, behavioral and physiological adaptations for diving and fasting, general physiology and metabolism, and sensory capacities. The permit expires June 30, 2015. In compliance with the National Environmental Policy Act of 1969 (42 U.S.C. 4321 et seq.), a final determination has been made that the activity proposed is categorically excluded from the requirement to prepare an environmental assessment or environmental impact statement. Dated: June 29, 2010. P. Michael Payne, Chief, Permits, Conservation and Education Division, Office of Protected Resources, National Marine Fisheries Service. [FR Doc. 2010–16495 Filed 7–6–10; 8:45 am] BILLING CODE 3510–22–S DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance AGENCY: Economic Development Administration, Department of Commerce. ACTION: Notice and Opportunity for Public Comment. Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT 6/7/2010 THROUGH 6/24/2010 Date accepted for filing Firm Address Flinchbaugh Engineering, Inc ... 4387 Run Way, York, PA 17406. 10860 Mulberry Avenue, Fontana, CA 92337–7027. 6/7/2010 Precision manufacturing of CNC machined metal parts. 6/7/2010 45 Leigh Drive, York, PA 17406. 1590 Todd Farm Drive, Elgin, IL 60123. 8630 S. Regency Drive, Tulsa, OK 74131. 1425 Commerce Lane, Jupiter, FL 33458. P.O. Box 100, Progreso, TX 78579. 1249 Lehigh Station Rd., Henrietta, NY 14467. 6/8/2010 Manufactures wood and plastic laminate cabinets, countertops, reception desks, partitions, shelving, and millwork on a production and custom basis for commercial, industrial and other businesses. American Products is a manufacturer of electronic controls. 151 Jimmy Carter, Plains, GA 31780. 6/9/2010 S&H Cabinets & Manufacturing, Inc. American Products, Inc ............ First Priority, Inc ........................ OK Fabricators, LLC ................. cprice-sewell on DSK8KYBLC1PROD with NOTICES Pace Machine &Tool, Inc ......... Rio Rico Farms, Inc .................. Ted Hosmer Enterprises, Inc .... Windham Castings, Inc ............. VerDate Mar<15>2010 15:28 Jul 06, 2010 Jkt 220001 PO 00000 Frm 00014 Fmt 4703 6/8/2010 6/9/2010 6/9/2010 6/9/2010 6/9/2010 Sfmt 4703 Products The company is a manufacturer of pharmaceuticals for the veterinary industry. Heavy equipment parts fabrication, to include but not limited to HVAC, boilers, steam vents. The firm produces custom-made machine parts; primary manufacturing material is metal. Grower and processor of edible roots for human consumption. The firm offers design/build for landscape and nursery supplies and plant material consisting of shrubs, trees, perennials, annuals, and a wide variety of mulches. In the winter months, the firm provides snow removal services. The firm produces cast aluminum furniture; primary manufacturing material is aluminum. E:\FR\FM\07JYN1.SGM 07JYN1 Federal Register / Vol. 75, No. 129 / Wednesday, July 7, 2010 / Notices 38989 LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT 6/7/2010 THROUGH 6/24/2010—Continued Firm Date accepted for filing Address Fulford Manufacturing Company, Inc. 65 Tripps 02915. RI 6/10/2010 Trelleborg Sealing Solutions US, Inc. The Marwin Company, Inc ....... 2531 Bremer Rd, Fort Wayne, IN. 1703 Atlas Road P.O., Columbia, SC 29290. 1560 Lisbon Street, Lewiston, ME 04240. 6/10/2010 IQE, Inc ..................................... 119 Technology Drive, Bethlehem, PA 18015. 6/14/2010 Oklahoma Safety Equipment Co., Inc. Oliver Manufacturing Company, Inc. Dry Corp, LLC ........................... 1710 W. Tacoma, Broken Arrow, OK 74012. 17777 U.S. Highway 50, Rocky Ford, CO 81067. 349 Military Cutoff Road, Wilmington, NC 28405. 6/14/2010 Lorbern Manufacturing, Inc ....... 708 Morse Avenue, Schaumburg, IL 60193. 6/15/2010 MicroMax, Inc ........................... 6/15/2010 Pollmann North America, Inc .... 5840 N. Canton Center Rd., Canton, MI 48187. 950 Chicago Tube Drive, Romeoville, IL 60446. DJ Acquisition Management Corp. d/b/a Weco. 6364 Dean Parkway, Ontario, NY 14519. 6/18/2010 Fletcher Rugs, Inc d/b/a Mountain Rug Mills. AG Devices of Colorado, Inc .... 609 North King Street, Hendersonville, NC 28792. 9595 Highway 65, Austin, CO 81410. 1500 Jefferson Road, Rochester, NY 14623. 1500 Jefferson Road, Lincoln, RI 02865. 6/22/2010 Elmet Technologies, Inc ........... Eldre Corporation ...................... cprice-sewell on DSK8KYBLC1PROD with NOTICES Tanury Industries ...................... Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 7106, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance. VerDate Mar<15>2010 15:28 Jul 06, 2010 Jkt 220001 Lane, East, 6/11/2010 6/14/2010 6/14/2010 6/15/2010 6/15/2010 6/24/2010 6/24/2010 6/24/2010 Products Fulford Manufacturing company manufactures hardware, plumbing fixtures and fittings, metal stampings, costume jewelry using materials that include stainless steel, brass and aluminum. The company manufactures precision plastic bearings and sealing systems. The firm produces attic stairways, bi-fold doors, & pocket door frames; primary manufacturing material is wood. Elmet is global supplier of high performance materials including molybdenum, refractory metals, wire products and lighting products. IQE manufactures epitaxial wafers used in cell phones, cell phone towers, advanced military communications, defense radar and guidance systems, sensors and optoelectronics. Pressure measuring instruments. Manufacturer of farm machinery and equipment, specializing in cleaning machines for fruit, grain or vegetables. The firm produces waterproof cast, bandage, prosthetic and ostomy protectors. The primary manufacturing materials include natural rubber latex, neoprene, PVC vinyl, and injection molded plastic. The company is a manufacturer of machine parts and tooling for the fastener industry. The firm manufactures machined metal parts and tooling. Engineering design and testing services. The company is a manufacturer of electro-mechanical and mechanical subassemblies for the automotive, medical, appliance, and consumer electronics industries. The Company is engaged in contract manufacturing for original equipment manufacturers (OEMs). This includes metal fabrication, machining, finishing and assembly to the customer’s product specifications. The firm produces area rugs and carpets. The primary manufacturing material is wool and cotton. AG Devices produces custom electrical cables for a range of applications. Manufacturer of laminated Bus Bars or current carrying wiring devices. The firm provides metal finishing services to a wide group of decorative products. Dated: June 25, 2010. Miriam J. Kearse, Eligibility Certifier. [FR Doc. 2010–16449 Filed 7–6–10; 8:45 am] BILLING CODE 3510–24–P DEPARTMENT OF COMMERCE International Trade Administration [A–588–857] Welded Large Diameter Line Pipe From Japan: Notice of Rescission of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On January 29, 2010, the U.S. Department of Commerce (the PO 00000 Frm 00015 Fmt 4703 Sfmt 4703 Department) published a notice of initiation of an administrative review of the antidumping duty order on welded large diameter line pipe from Japan. The review covers 4 producers/exporters of welded large diameter line pipe from Japan, which are, JFE Steel Corporation, Nippon Steel Corporation, Sumitomo Corporation, and Sumitomo Metal Industries, Ltd. (a.k.a. Sumimoto Metals Pipe & Tube Company). Based on a withdrawal of the request for review from United States Steel Corporation (hereafter ‘‘U.S. Steel’’), a domestic producer of welded large diameter line pipe, we are now rescinding this administrative review in full. DATES: Effective Date: July 7, 2010. FOR FURTHER INFORMATION CONTACT: John Drury, or Angelica Mendoza, AD/CVD Operations, Office 7, Import E:\FR\FM\07JYN1.SGM 07JYN1

Agencies

[Federal Register Volume 75, Number 129 (Wednesday, July 7, 2010)]
[Notices]
[Pages 38988-38989]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-16449]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and Opportunity for Public Comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et 
seq.), the Economic Development Administration (EDA) has received 
petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. EDA has initiated 
separate investigations to determine whether increased imports into the 
United States of articles like or directly competitive with those 
produced by each firm contributed importantly to the total or partial 
separation of the firm's workers, or threat thereof, and to a decrease 
in sales or production of each petitioning firm.

    List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment 6/7/2010
                                                Through 6/24/2010
----------------------------------------------------------------------------------------------------------------
                                                             Date
              Firm                       Address           accepted                    Products
                                                          for filing
----------------------------------------------------------------------------------------------------------------
Flinchbaugh Engineering, Inc...  4387 Run Way, York, PA     6/7/2010  Precision manufacturing of CNC machined
                                  17406.                               metal parts.
S&H Cabinets & Manufacturing,    10860 Mulberry Avenue,     6/7/2010  Manufactures wood and plastic laminate
 Inc.                             Fontana, CA 92337-                   cabinets, countertops, reception desks,
                                  7027.                                partitions, shelving, and millwork on a
                                                                       production and custom basis for
                                                                       commercial, industrial and other
                                                                       businesses.
American Products, Inc.........  45 Leigh Drive, York,      6/8/2010  American Products is a manufacturer of
                                  PA 17406.                            electronic controls.
First Priority, Inc............  1590 Todd Farm Drive,      6/8/2010  The company is a manufacturer of
                                  Elgin, IL 60123.                     pharmaceuticals for the veterinary
                                                                       industry.
OK Fabricators, LLC............  8630 S. Regency Drive,     6/9/2010  Heavy equipment parts fabrication, to
                                  Tulsa, OK 74131.                     include but not limited to HVAC, boilers,
                                                                       steam vents.
Pace Machine &Tool, Inc........  1425 Commerce Lane,        6/9/2010  The firm produces custom-made machine
                                  Jupiter, FL 33458.                   parts; primary manufacturing material is
                                                                       metal.
Rio Rico Farms, Inc............  P.O. Box 100,              6/9/2010  Grower and processor of edible roots for
                                  Progreso, TX 78579.                  human consumption.
Ted Hosmer Enterprises, Inc....  1249 Lehigh Station        6/9/2010  The firm offers design/build for landscape
                                  Rd., Henrietta, NY                   and nursery supplies and plant material
                                  14467.                               consisting of shrubs, trees, perennials,
                                                                       annuals, and a wide variety of mulches.
                                                                       In the winter months, the firm provides
                                                                       snow removal services.
Windham Castings, Inc..........  151 Jimmy Carter,          6/9/2010  The firm produces cast aluminum furniture;
                                  Plains, GA 31780.                    primary manufacturing material is
                                                                       aluminum.

[[Page 38989]]

 
Fulford Manufacturing Company,   65 Tripps Lane, East,     6/10/2010  Fulford Manufacturing company manufactures
 Inc.                             RI 02915.                            hardware, plumbing fixtures and fittings,
                                                                       metal stampings, costume jewelry using
                                                                       materials that include stainless steel,
                                                                       brass and aluminum.
Trelleborg Sealing Solutions     2531 Bremer Rd, Fort      6/10/2010  The company manufactures precision plastic
 US, Inc.                         Wayne, IN.                           bearings and sealing systems.
The Marwin Company, Inc........  1703 Atlas Road P.O.,     6/11/2010  The firm produces attic stairways, bi-fold
                                  Columbia, SC 29290.                  doors, & pocket door frames; primary
                                                                       manufacturing material is wood.
Elmet Technologies, Inc........  1560 Lisbon Street,       6/14/2010  Elmet is global supplier of high
                                  Lewiston, ME 04240.                  performance materials including
                                                                       molybdenum, refractory metals, wire
                                                                       products and lighting products.
IQE, Inc.......................  119 Technology Drive,     6/14/2010  IQE manufactures epitaxial wafers used in
                                  Bethlehem, PA 18015.                 cell phones, cell phone towers, advanced
                                                                       military communications, defense radar
                                                                       and guidance systems, sensors and
                                                                       optoelectronics.
Oklahoma Safety Equipment Co.,   1710 W. Tacoma, Broken    6/14/2010  Pressure measuring instruments.
 Inc.                             Arrow, OK 74012.
Oliver Manufacturing Company,    17777 U.S. Highway 50,    6/14/2010  Manufacturer of farm machinery and
 Inc.                             Rocky Ford, CO 81067.                equipment, specializing in cleaning
                                                                       machines for fruit, grain or vegetables.
Dry Corp, LLC..................  349 Military Cutoff       6/15/2010  The firm produces waterproof cast,
                                  Road, Wilmington, NC                 bandage, prosthetic and ostomy
                                  28405.                               protectors. The primary manufacturing
                                                                       materials include natural rubber latex,
                                                                       neoprene, PVC vinyl, and injection molded
                                                                       plastic.
Lorbern Manufacturing, Inc.....  708 Morse Avenue,         6/15/2010  The company is a manufacturer of machine
                                  Schaumburg, IL 60193.                parts and tooling for the fastener
                                                                       industry. The firm manufactures machined
                                                                       metal parts and tooling.
MicroMax, Inc..................  5840 N. Canton Center     6/15/2010  Engineering design and testing services.
                                  Rd., Canton, MI 48187.
Pollmann North America, Inc....  950 Chicago Tube          6/15/2010  The company is a manufacturer of electro-
                                  Drive, Romeoville, IL                mechanical and mechanical subassemblies
                                  60446.                               for the automotive, medical, appliance,
                                                                       and consumer electronics industries.
DJ Acquisition Management Corp.  6364 Dean Parkway,        6/18/2010  The Company is engaged in contract
 d/b/a Weco.                      Ontario, NY 14519.                   manufacturing for original equipment
                                                                       manufacturers (OEMs). This includes metal
                                                                       fabrication, machining, finishing and
                                                                       assembly to the customer's product
                                                                       specifications.
Fletcher Rugs, Inc d/b/a         609 North King Street,    6/22/2010  The firm produces area rugs and carpets.
 Mountain Rug Mills.              Hendersonville, NC                   The primary manufacturing material is
                                  28792.                               wool and cotton.
AG Devices of Colorado, Inc....  9595 Highway 65,          6/24/2010  AG Devices produces custom electrical
                                  Austin, CO 81410.                    cables for a range of applications.
Eldre Corporation..............  1500 Jefferson Road,      6/24/2010  Manufacturer of laminated Bus Bars or
                                  Rochester, NY 14623.                 current carrying wiring devices.
Tanury Industries..............  1500 Jefferson Road,      6/24/2010  The firm provides metal finishing services
                                  Lincoln, RI 02865.                   to a wide group of decorative products.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter. A written request for a hearing 
must be submitted to the Trade Adjustment Assistance for Firms 
Division, Room 7106, Economic Development Administration, U.S. 
Department of Commerce, Washington, DC 20230, no later than ten (10) 
calendar days following publication of this notice.
    Please follow the procedures set forth in Section 315.9 of EDA's 
final rule (71 FR 56704) for procedures for requesting a public 
hearing. The Catalog of Federal Domestic Assistance official program 
number and title of the program under which these petitions are 
submitted is 11.313, Trade Adjustment Assistance.

    Dated: June 25, 2010.
Miriam J. Kearse,
Eligibility Certifier.
[FR Doc. 2010-16449 Filed 7-6-10; 8:45 am]
BILLING CODE 3510-24-P