Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 34426-34428 [2010-14612]
Download as PDF
<![CDATA[
34426
Federal Register / Vol. 75, No. 116 / Thursday, June 17, 2010 / Notices
7317.00.20 and 7317.00.30. Also
excluded from the scope of this
proceeding are thumb tacks, which are
currently classified under
HTSUS 7317.00.10.00. Also excluded
from the scope of this proceeding are
certain brads and finish nails that are
equal to or less than 0.0720 inches in
shank diameter, round or rectangular in
cross section, between 0.375 inches and
2.5 inches in length, and that are
collated with adhesive or polyester film
tape backed with a heat seal adhesive.
Also excluded from the scope of this
proceeding are fasteners having a case
hardness greater than or equal to 50
HRC, a carbon content greater than or
equal to 0.5 percent, a round head, a
secondary reduced–diameter raised
head section, a centered shank, and a
smooth symmetrical point, suitable for
use in gas–actuated hand tools.
While the HTSUS subheadings are
provided for convenience and customs
purposes, the written description of the
scope of this investigation is dispositive.
mstockstill on DSKH9S0YB1PROD with NOTICES
Analysis of Comments Received
All issues raised in the case and
rebuttal briefs by parties to this
proceeding and are listed in the
Appendix to this notice and addressed
in the Issues and Decision
Memorandum (‘‘Final Decision Memo’’),
which is hereby adopted by this notice.
Parties can find a complete discussion
of the issues raised in this new shipper
review and the corresponding
recommendations in this public
memorandum, which is on file in the
Central Records Unit (‘‘CRU’’), room
1117 of the main Department of
Commerce building. In addition, a copy
of the Final Decision Memo can be
accessed directly on our website at
https://ia.ita.doc.gov/. The paper copy
and electronic version of the Final
Decision Memo are identical in content.
Changes Since the Preliminary Results
Based on a review of the record as
well as comments received from parties
regarding our Preliminary Results, we
have made revisions to the margin
calculation for Qingdao Denarius in the
final results. For all changes to the
calculations of Qingdao Denarius, see
the Final Decision Memo and Final
Analysis Memorandum. For changes to
the surrogate values see Memorandum
to the File, through Alex Villanueva,
Program Manager, AC/CVD Operations,
Office 9, from Tim Lord, Case Analyst,
AD/CVD Operations, Office 9, Analysis
of the Final Results of the First New
Shipper Review of Certain Steel Nails
from the People’s Republic of China:
Qingdao Denarius Manufacture Co., Ltd.
(‘‘Qingdao Denarius’’).
VerDate Mar<15>2010
16:13 Jun 16, 2010
Jkt 220001
Final Results of the Review
The weighted–average dumping
margin for the POR is as follows:
CERTAIN STEEL NAILS FROM PRC
Manufacturer/Exporter
Weighted–Average
Margin (Percent)
Qingdao Denarius .........
34.14
Assessment
The Department will determine, and
U.S. Customs and Border Protection
(‘‘CBP’’) shall assess, antidumping duties
on all appropriate entries, pursuant to
19 CFR 351.212(b)(1). We have
calculated importer–specific duty
assessment rates on a per–unit basis.
Specifically, we divided the total
dumping margins (calculated as the
difference between normal value and
export price) for each importer by the
total quantity of subject merchandise
sold to that importer during the POR to
calculate a per–unit assessment amount.
In this and future reviews, we will
direct CBP to assess importer–specific
assessment rates based on the resulting
per–unit (i.e., per–kilogram) rates by the
weight in kilograms of each entry of the
subject merchandise during the POR.
The Department intends to issue
appropriate assessment instructions
directly to CBP 15 days after publication
of the final results of this new shipper
review.
Cash Deposit Requirements
The following cash deposit
requirements will be effective upon
publication of these final results of this
new shipper review for all shipments of
subject merchandise by Qingdao
Denarius, entered, or withdrawn from
warehouse, for consumption on or after
the publication date, as provided by
section 751(a)(2)(C) of the Tariff Act of
1930, as amended (‘‘Act’’): (1) for subject
merchandise produced and exported by
Qingdao Denarius, the cash deposit rate
will be the percent listed above, or the
equivalent per–unit rate; (2) for subject
merchandise exported by Qingdao
Denarius, but not manufactured by
Qingdao Denarius, the cash deposit rate
will continue to be the PRC–wide rate
of 118.04 percent; and (3) for subject
merchandise manufactured by Qingdao
Denarius, but exported by any party
other than Qingdao Denarius, the cash
deposit rate will be the rate applicable
to the exporter. These cash deposit
requirements will remain in effect until
further notice.
Reimbursement of Duties
This notice also serves as a final
reminder to importers of their
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
responsibility under 19 CFR
351.402(f)(2) to file a certificate
regarding the reimbursement of
antidumping duties prior to liquidation
of the relevant entries during this POR.
Failure to comply with this requirement
could result in the Department’s
presumption that reimbursement of
antidumping duties has occurred and
the subsequent assessment of doubled
antidumping duties.
Administrative Protective Orders
This notice also serves as a reminder
to parties subject to administrative
protective orders (‘‘APO’’) of their
responsibility concerning the return or
destruction of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305, which continues
to govern business proprietary
information in this segment of the
proceeding. Timely written notification
of the return/destruction of APO
materials or conversion to judicial
protective order is hereby requested.
Failure to comply with the regulations
and terms of an APO is a violation
which is subject to sanction.
We are issuing and publishing this
determination in accordance with
sections 751(a)(2)(B) and 777(i) of the
Act, and 19 CFR 351.214(h) and
351.221(b)(5).
Dated: June 10, 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import
Administration.
Appendix I Decision Memorandum
COMMENT 1: LEGITIMACY OF
QINGDAO DENARIUS AS A NEW
SHIPPER COMMENT 2: SURROGATE
VALUES
A. CARTONS
B. STEEL SCRAP
C. CURRENCY CONVERSION
COMMENT 3: CLASSIFICATION OF
CERTAIN INPUTS
COMMENT 4: SURROGATE
FINANCIAL RATIOS
COMMENT 5: ADJUSTMENT TO
GROSS UNIT PRICE
[FR Doc. 2010–14666 Filed 6–16–10; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for
Determination of Eligibility To Apply
for Trade Adjustment Assistance
AGENCY: Economic Development
Administration, Department of
Commerce.
E:\FR\FM\17JNN1.SGM
17JNN1
Federal Register / Vol. 75, No. 116 / Thursday, June 17, 2010 / Notices
ACTION: Notice and opportunity for
public comment.
Pursuant to Section 251 of the Trade
Act of 1974 (19 U.S.C. 2341 et seq.), the
Economic Development Administration
(EDA) has received petitions for
certification of eligibility to apply for
Trade Adjustment Assistance from the
firms listed below. EDA has initiated
separate investigations to determine
whether increased imports into the
United States of articles like or directly
34427
competitive with those produced by
each firm contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT
[4/28/2010 through 6/7/2010]
Firm
Kansas City Tent & Awning
Company.
A. Rifkin Company ..................
Date accepted
products for
filing
Address
1819 Holmes, Kansas City,
MO 64108.
1400 Sans Souci Parkway,
Wilkes-Barre, PA 18703.
930 Hamilton Street, Allentown, PA 18101.
4/28/2010
Fitzpatrick Manufacturing
Company.
33637 Sterling Ponds, Sterling, MI 48312.
5/14/2010
ZMC Industries, LLC dba
Vomax.
Electro Chemical Engineering
& Manufacturing.
76 Industrial Drive,
Northhampton, MA 01060.
750 Broad Street, Emmaus,
PA 18049.
5/14/2010
Kepner-Scott Shoe Company
209 North Liberty Street,
Orwigsburg, PA 17961.
1000 East Main Street, Mount
Joy, PA 17552.
Saratoga Drive, Waukesha,
WI 53186.
1490 Mitchell Road, PO Aurora, IL 60507.
601 South 10th Street, Allentown, PA 18103.
5/17/2010
Cooley Group Holdings Inc. ....
50 Esten Avenue, Pawtucket,
RI 02860.
5/24/2010
Corcoran Printing, Inc. ............
641 N. Pennsylvania, Wilkes
Barre, PA 18705.
5/24/2010
Chatsworth Data Corporation ..
20710 Lassen Street,
Chatsworth, CA 91311.
5/25/2010
Pairpoint Glass Company, LLC
851 Sandwich Road, P.O.
Sagamore, MA 02561.
485 Hague Street, Rochester,
NY 14606.
25 Vantage Point Drive, Rochester, NY 14624.
257 Expert Way, Dalton, GA
30721.
17066 Berwick Turnpike,
Gillete, PA 16925.
2724 N. Sheridan, Tulsa, OK
74115.
2999 Elizabethtown Road,
Hershey, PA 17033.
603 First Avenue, Sterling, IL
61081.
5/26/2010
Applied Separations, Inc. ........
Mount Joy Wire Corporation ...
TLX Technologies, LLC ...........
Valley Fastener Group, LLC ...
Eastern Surfaces, Inc. .............
Woerner Industries, Inc. dba
Lassco Wizer.
Century Mold Company, Inc. ..
Expert Die, Inc. ........................
Dura-Bilt Products, Inc. dba
Lassco Wizer.
The Carpentree, Inc. ...............
Ames Industries, Inc. ...............
mstockstill on DSKH9S0YB1PROD with NOTICES
Frantz Manufacturing ..............
Paneltech Products, Inc. .........
Puritan Products, Inc. ..............
Charles Alan Incorporated ......
Custom Wood Gifts, LLC ........
VerDate Mar<15>2010
18:01 Jun 16, 2010
5/14/2010
5/14/2010
5/17/2010
5/17/2010
5/17/2010
5/17/2010
5/18/2010
5/26/2010
5/27/2010
5/27/2010
6/1/2010
6/1/2010
6/3/2010
6/3/2010
2999 John Stevens Way,
Hoquiam, WA 98550.
Lehigh Valley Industrial, Bethlehem, PA 18107.
2901 Stanley Avenue, Fort
Worth, TX 76110.
5465 Woodbine Avenue,
North, SC 29406.
Jkt 220001
PO 00000
Frm 00010
6/3/2010
6/4/2010
6/7/2010
6/7/2010
Fmt 4703
Sfmt 4703
Products
The company designs and manufactures custom tents and
awnings.
A. Rifkin manufactures security and multi-use reusable fabric
lock bags systems and related products.
Applied Separations manufactures analytical laboratory instruments for DNA testing and systems to produce supercritical fluids.
Machining and assembly of industrial motion control products, automotive powertrain and driveline components,
aftermarket automotive tooling, mold and die components.
Vomax manufactures custom performance apparel. They use
a method of dye sublimation.
Electro Chemical manufactures steel tanks that are lined with
various materials for the containment of corrosive materials.
Kepner Scott’s line of footwear consists of children’s orthopedic, casual and dress footware.
Mount Joy is a manufacturer of carbon steel wire.
The firm designs and manufactures latching, u-frame, actuators, high speed, tubular and valve solenoids.
Valley manufactures and distributes carbon steel, stainless
steel, brass, aluminum, and copper fastening products.
Eastern Surfaces is a manufacturer of natural and man-made
stone and solid surface products. We also template, fabricate and install counters.
Cooley Group Holdings Inc. manufactures made to order rubber roofing membrane in roll form and other made to order
engineered composites.
Corcoran Printing’s products include high quality multi-color
commercial printing such as brochures, posters, catalogs,
and postcards.
Chatsworth Data produces Impact Indicators and Recorders,
Optical Mark Recorders and Scanners and Cable Circuit
Analysis Systems.
Manufactures pressed and blown glass.
Woerner manufactures primarily equipment used in the finishing area of the printing industry and church furniture.
CM produces injection molded plastic parts primarily for
‘‘under the hood’’ plastic parts for automotive markets.
The firm produces saw blades, CNC tools, knives and circular blades.
National manufacturer of sunrooms, screenrooms, patio
awnings and porch roofs.
Frames for art and photography pictures.
Ames builds intricate, close tolerance molds for a multitude
of custom products.
The company is a manufacturer of ball bearings and steel
balls for the Company industrial machinery and automotive
industries.
Manufacturer of composite construction panels, interior and
exterior, glass fiber protection fabrics.
Firm sells specialty chemicals and custom chemical formulations.
Home and office furniture.
The firm produces laser cut replicas of historic sites and
buildings; primary manufacturing material is wood.
E:\FR\FM\17JNN1.SGM
17JNN1
34428
Federal Register / Vol. 75, No. 116 / Thursday, June 17, 2010 / Notices
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT—
Continued
[4/28/2010 through 6/7/2010]
Firm
Everbrite Electronics, Inc. .......
H. H. Fessler Knitting Co, Inc.
d/b/a FesslerUSA.
720 W. Cherry Street,
Chanute, KS 66720.
216 West Independence,
Orwigsburg, PA 17961.
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Trade Adjustment
Assistance for Firms Division, Room
7106, Economic Development
Administration, U.S. Department of
Commerce, Washington, DC 20230, no
later than ten (10) calendar days
following publication of this notice.
Please follow the procedures set forth
in Section 315.9 of EDA’s final rule (71
FR 56704) for procedures for requesting
a public hearing. The Catalog of Federal
Domestic Assistance official program
number and title of the program under
which these petitions are submitted is
11.313, Trade Adjustment Assistance.
Dated: June 11, 2010.
Miriam J. Kearse,
Eligibility Certifier.
[FR Doc. 2010–14612 Filed 6–16–10; 8:45 am]
BILLING CODE 3510–24–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XW61
Taking and Importing Marine
Mammals: Taking Marine Mammals
Incidental to Navy Training Exercises
in Three East Coast Range Complexes
mstockstill on DSKH9S0YB1PROD with NOTICES
AGENCY: National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice; issuance of three Letters
of Authorization.
SUMMARY: In accordance with the
Marine Mammal Protection Act
(MMPA), as amended, and
implementing regulations, notification
is hereby given that NMFS has issued
three one-year Letters of Authorization
(LOAs) to take marine mammals by
harassment incidental to the U.S. Navy’s
training activities within the Navy’s
Virginia Capes (VACAPES), Jacksonville
(JAX), and Cherry Point Range
VerDate Mar<15>2010
16:13 Jun 16, 2010
Date accepted
products for filing
Address
Jkt 220001
6/7/2010
6/7/2010
Products
Electronic switching power supplies for neon signs and LED
based products and related components.
FesslerUSA manufactures custom women and children’s apparel and provides design and production.
Complexes to the Commander, U.S.
Fleet Forces Command, 1562 Mitscher
Avenue, Suite 250, Norfolk, VA 23551–
2487 and persons operating under his
authority.
DATES: Effective from June 5, 2010,
through June 4, 2011.
ADDRESSES: Copies of the Navy’s
January 28, 2010, LOA applications, the
LOAs, the Navy’s 2009 marine mammal
monitoring report and the Navy’s 2009
exercise report are available by writing
to P. Michael Payne, Chief, Permits,
Conservation, and Education Division,
Office of Protected Resources, National
Marine Fisheries Service, 1315 EastWest Highway, Silver Spring, MD
20910, by telephoning the contact listed
here (see FOR FURTHER INFORMATION
CONTACT), or online at: https://
www.nmfs.noaa.gov/pr/permits/
incidental.htm#applications.
Documents cited in this notice may be
viewed, by appointment, during regular
business hours, at the aforementioned
address.
FOR FURTHER INFORMATION CONTACT:
Shane Guan, Office of Protected
Resources, NMFS (301) 713–2289 x 137.
SUPPLEMENTARY INFORMATION:
Background
Section 101(a)(5)(A) of the MMPA (16
U.S.C. 1361 et seq.) directs the Secretary
of Commerce to allow, upon request, the
incidental, but not intentional taking of
marine mammals by U.S. citizens who
engage in a military readiness activity if
certain findings are made and
regulations are issued.
Authorization may be granted for
periods of 5 years or less if NMFS finds
that the taking will have a negligible
impact on the species or stock(s), and
will not have an unmitigable adverse
impact on the availability of the species
or stock(s) for certain subsistence uses.
In addition, NMFS must prescribe
regulations that include permissible
methods of taking and other means
effecting the least practicable adverse
impact on the species and its habitat,
and on the availability of the species for
subsistence uses, paying particular
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
attention to rookeries, mating grounds,
and areas of similar significance. The
regulations also must include
requirements pertaining to the
monitoring and reporting of such taking.
Regulations governing the taking of
marine mammals incidental to the U.S.
Navy’s training activities at the Navy’s
VACAPES, JAX, and Cherry Point Range
Complexes were published on June 15,
2009 (VACAPES: 74 FR 28328; JAX: 74
FR 28349; Cherry Point: 74 FR 28370),
and remain in effect through June 4,
2014. They are codified at 50 CFR part
218 subpart A (for VACAPES Range
Complex), subpart B (for JAX Range
Complex), and subpart C (for Cherry
Point Range Complex). These
regulations include mitigation,
monitoring, and reporting requirements
for the incidental taking of marine
mammals by the Navy’s range complex
training exercises. For detailed
information on these actions, please
refer to the June 15, 2009 Federal
Register Notices and 50 CFR part 218
subparts A, B, and C.
Summary of LOA Request
NMFS received an application from
the U.S. Navy for three LOAs covering
the Navy’s training activities at the
VACAPES, JAX, and Cherry Point Range
Complexes off the US East Coast under
the regulations issued on June 15, 2009
(VACAPES: 74 FR 28328; JAX: 74 FR
28349; Cherry Point: 74 FR 28370). The
Navy requested that these LOAs become
effective on June 5, 2010. The
application requested authorization, for
a period not to exceed one year, to take,
by harassment, marine mammals
incidental to proposed training
activities that involve underwater
explosives.
Summary of Activity under the 2009
LOA
As described in the Navy’s exercise
reports, in 2009, the training activities
conducted by the Navy were within the
scope and amounts contemplated by the
final rule and authorized by the 2009
LOAs. In fact, the number of training
E:\FR\FM\17JNN1.SGM
17JNN1
]]>Agencies
[Federal Register Volume 75, Number 116 (Thursday, June 17, 2010)]
[Notices]
[Pages 34426-34428]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-14612]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for Determination of Eligibility To
Apply for Trade Adjustment Assistance
AGENCY: Economic Development Administration, Department of Commerce.
[[Page 34427]]
ACTION: Notice and opportunity for public comment.
-----------------------------------------------------------------------
Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et
seq.), the Economic Development Administration (EDA) has received
petitions for certification of eligibility to apply for Trade
Adjustment Assistance from the firms listed below. EDA has initiated
separate investigations to determine whether increased imports into the
United States of articles like or directly competitive with those
produced by each firm contributed importantly to the total or partial
separation of the firm's workers, or threat thereof, and to a decrease
in sales or production of each petitioning firm.
List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment
[4/28/2010 through 6/7/2010]
----------------------------------------------------------------------------------------------------------------
Date accepted
Firm Address products for Products
filing
----------------------------------------------------------------------------------------------------------------
Kansas City Tent & Awning 1819 Holmes, Kansas 4/28/2010 The company designs and manufactures
Company. City, MO 64108. custom tents and awnings.
A. Rifkin Company............. 1400 Sans Souci 5/14/2010 A. Rifkin manufactures security and multi-
Parkway, Wilkes- use reusable fabric lock bags systems
Barre, PA 18703. and related products.
Applied Separations, Inc...... 930 Hamilton Street, 5/14/2010 Applied Separations manufactures
Allentown, PA 18101. analytical laboratory instruments for
DNA testing and systems to produce
supercritical fluids.
Fitzpatrick Manufacturing 33637 Sterling Ponds, 5/14/2010 Machining and assembly of industrial
Company. Sterling, MI 48312. motion control products, automotive
powertrain and driveline components,
aftermarket automotive tooling, mold and
die components.
ZMC Industries, LLC dba Vomax. 76 Industrial Drive, 5/14/2010 Vomax manufactures custom performance
Northhampton, MA apparel. They use a method of dye
01060. sublimation.
Electro Chemical Engineering & 750 Broad Street, 5/17/2010 Electro Chemical manufactures steel tanks
Manufacturing. Emmaus, PA 18049. that are lined with various materials
for the containment of corrosive
materials.
Kepner-Scott Shoe Company..... 209 North Liberty 5/17/2010 Kepner Scott's line of footwear consists
Street, Orwigsburg, of children's orthopedic, casual and
PA 17961. dress footware.
Mount Joy Wire Corporation.... 1000 East Main 5/17/2010 Mount Joy is a manufacturer of carbon
Street, Mount Joy, steel wire.
PA 17552.
TLX Technologies, LLC......... Saratoga Drive, 5/17/2010 The firm designs and manufactures
Waukesha, WI 53186. latching, u-frame, actuators, high
speed, tubular and valve solenoids.
Valley Fastener Group, LLC.... 1490 Mitchell Road, 5/17/2010 Valley manufactures and distributes
PO Aurora, IL 60507. carbon steel, stainless steel, brass,
aluminum, and copper fastening products.
Eastern Surfaces, Inc......... 601 South 10th 5/18/2010 Eastern Surfaces is a manufacturer of
Street, Allentown, natural and man-made stone and solid
PA 18103. surface products. We also template,
fabricate and install counters.
Cooley Group Holdings Inc..... 50 Esten Avenue, 5/24/2010 Cooley Group Holdings Inc. manufactures
Pawtucket, RI 02860. made to order rubber roofing membrane in
roll form and other made to order
engineered composites.
Corcoran Printing, Inc........ 641 N. Pennsylvania, 5/24/2010 Corcoran Printing's products include high
Wilkes Barre, PA quality multi-color commercial printing
18705. such as brochures, posters, catalogs,
and postcards.
Chatsworth Data Corporation... 20710 Lassen Street, 5/25/2010 Chatsworth Data produces Impact
Chatsworth, CA 91311. Indicators and Recorders, Optical Mark
Recorders and Scanners and Cable Circuit
Analysis Systems.
Pairpoint Glass Company, LLC.. 851 Sandwich Road, 5/26/2010 Manufactures pressed and blown glass.
P.O. Sagamore, MA
02561.
Woerner Industries, Inc. dba 485 Hague Street, 5/26/2010 Woerner manufactures primarily equipment
Lassco Wizer. Rochester, NY 14606. used in the finishing area of the
printing industry and church furniture.
Century Mold Company, Inc..... 25 Vantage Point 5/27/2010 CM produces injection molded plastic
Drive, Rochester, NY parts primarily for ``under the hood''
14624. plastic parts for automotive markets.
Expert Die, Inc............... 257 Expert Way, 5/27/2010 The firm produces saw blades, CNC tools,
Dalton, GA 30721. knives and circular blades.
Dura-Bilt Products, Inc. dba 17066 Berwick 6/1/2010 National manufacturer of sunrooms,
Lassco Wizer. Turnpike, Gillete, screenrooms, patio awnings and porch
PA 16925. roofs.
The Carpentree, Inc........... 2724 N. Sheridan, 6/1/2010 Frames for art and photography pictures.
Tulsa, OK 74115.
Ames Industries, Inc.......... 2999 Elizabethtown 6/3/2010 Ames builds intricate, close tolerance
Road, Hershey, PA molds for a multitude of custom
17033. products.
Frantz Manufacturing.......... 603 First Avenue, 6/3/2010 The company is a manufacturer of ball
Sterling, IL 61081. bearings and steel balls for the Company
industrial machinery and automotive
industries.
Paneltech Products, Inc....... 2999 John Stevens 6/3/2010 Manufacturer of composite construction
Way, Hoquiam, WA panels, interior and exterior, glass
98550. fiber protection fabrics.
Puritan Products, Inc......... Lehigh Valley 6/4/2010 Firm sells specialty chemicals and custom
Industrial, chemical formulations.
Bethlehem, PA 18107.
Charles Alan Incorporated..... 2901 Stanley Avenue, 6/7/2010 Home and office furniture.
Fort Worth, TX 76110.
Custom Wood Gifts, LLC........ 5465 Woodbine Avenue, 6/7/2010 The firm produces laser cut replicas of
North, SC 29406. historic sites and buildings; primary
manufacturing material is wood.
[[Page 34428]]
Everbrite Electronics, Inc.... 720 W. Cherry Street, 6/7/2010 Electronic switching power supplies for
Chanute, KS 66720. neon signs and LED based products and
related components.
H. H. Fessler Knitting Co, 216 West 6/7/2010 FesslerUSA manufactures custom women and
Inc. d/b/a FesslerUSA. Independence, children's apparel and provides design
Orwigsburg, PA 17961. and production.
----------------------------------------------------------------------------------------------------------------
Any party having a substantial interest in these proceedings may
request a public hearing on the matter. A written request for a hearing
must be submitted to the Trade Adjustment Assistance for Firms
Division, Room 7106, Economic Development Administration, U.S.
Department of Commerce, Washington, DC 20230, no later than ten (10)
calendar days following publication of this notice.
Please follow the procedures set forth in Section 315.9 of EDA's
final rule (71 FR 56704) for procedures for requesting a public
hearing. The Catalog of Federal Domestic Assistance official program
number and title of the program under which these petitions are
submitted is 11.313, Trade Adjustment Assistance.
Dated: June 11, 2010.
Miriam J. Kearse,
Eligibility Certifier.
[FR Doc. 2010-14612 Filed 6-16-10; 8:45 am]
BILLING CODE 3510-24-P
