Certain New Chemicals; Receipt and Status Information, 32754-32760 [2010-13627]
Download as PDF
<![CDATA[
32754
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: May 14, 2010.
Darryl S. Ballard,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2010–13626 Filed 6–8–10; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2010–0408; FRL–8825–5]
Certain New Chemicals; Receipt and
Status Information
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from March 1, 2010 to
April 23, 2010, consists of the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before July 9,
2010.
Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2010–0408, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Chemical Safety and
Pollution Prevention (OPPT),
Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington,
DC 20460–0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
erowe on DSK5CLS3C1PROD with NOTICES
ADDRESSES:
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2010–0408.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2010–0408. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket
are listed in the docket index available
at https://www.regulations.gov. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
PO 00000
Frm 00020
Fmt 4703
Sfmt 4703
p.m., Monday through Friday, excluding
legal holidays. The telephone number of
the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Bernice
Mudd, Information Management
Division (7407M), Office of Chemical
Safety and Pollution Prevention
Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington,
DC 20460–0001; telephone number:
(202) 564–8951; fax number: (202) 546–
8955; e-mail address:
mudd.bernice@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
E:\FR\FM\09JNN1.SGM
09JNN1
32755
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from March 1, 2010 to
April 23, 2010, consists of the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the
PMNs, both pending or expired, and the
notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 03/01/10 TO 04/23/10
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Methacrylate ester capped aromatic ether polymer
(S) 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester, reaction products
with
dicyclopentadiene,
5isocyanato-1-(isocyanatomethyl)1,3,3-trimethylcyclohexane, maleic
anhydride
and
2-methyl-1,3propanediol
(S) 2-propenoic acid, 2-hydroxyethyl
ester, reaction products with
dicyclopentadiene, 5-isocyanato-1(isocyanatomethyl)-1,3,3trimethylcyclohexane, maleic anhydride and 2-methyl-1,3-propanediol
(S) Titanium, Bu alc. 2-ethyl-1hexanol oleate stearate complexes
(S) 1,4-butanediol, polymer with 2,4diisocyanato-1-methylbenzene and
.alpha.-hydro-.omega.hydroxypoly[oxy(methyl-1,2ethanediyl)]
(G) Sulfonated heteropolycycle
(G) Sulfonated heteropolycycle
(G)
Isocyanate-functional
polyurethane prepolymer
(G)
Isocyanate-functional
polyurethane prepolymer
(S) Fatty acids, C18-unsaturated,
dimers, hydrogenated, bi[3-[(1-oxo2-propen-1-yl)oxy]-2,2-bis[[(1-oxo-2propen-1-yl)oxy]methyl]propyl]
esters
(G) Substituted cyclomethacrylate
03/01/10
05/29/10
CBI
P–10–0254
03/01/10
05/29/10
Piedmont Chemical Industries I, LLC.
(G) Thermoset molding compound;
Nondispersive use
(S) Ultra violet curable wood coatings;
ultra violet curable metal coatings
P–10–0255
03/01/10
05/29/10
Piedmont Chemical Industries I, LLC
(S) Ultra violet curable wood coatings;
ultra violet curable metal coatings
P–10–0256
03/01/10
05/29/10
CBI
P–10–0257
03/01/10
05/29/10
CBI
(S) Coupling agent for plastics; coupling agent for rubbers
(S) Polyurethane elastomer
P–10–0258
P–10–0259
P–10–0260
03/01/10
03/01/10
03/02/10
05/29/10
05/29/10
05/30/10
CBI
CBI
H.B. Fuller
(G) Pigment additive
(G) Pigment additive
(G) Industrial adhesive
P–10–0261
03/02/10
05/30/10
H.B. Fuller
(G) Industrial adhesive
P–10–0262
erowe on DSK5CLS3C1PROD with NOTICES
P–10–0253
03/02/10
05/30/10
Piedmont Chemical Industries I, LLC
(S) Ultra violet curable inks
P–10–0263
03/04/10
06/01/10
(G) Polymeric component
P–10–0264
03/04/10
06/01/10
Marubeni Specialty
Chemicals Inc.
CBI
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
PO 00000
Frm 00021
(G) Monomer
Fmt 4703
Sfmt 4703
(G) Methacrylate ester of fatty alcohol
alkoxylate
E:\FR\FM\09JNN1.SGM
09JNN1
32756
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 03/01/10 TO 04/23/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Coatings for car leather; water
borne industrial coatings like wood
(S) Antioxidant for plastic articles
(G)
Hexamethylenediisocyanate
homopolymer, alkyl-oxy-terminated
(G) Propanoic acid, alkylthio, (1,1dimethylethyl) - [[alkyl-4-hydroxy-2alkylphenyl]thio]alkylphenyl ester
(G) Acrylate copolymer
(G) Acrylate copolymer
(G) Polymer of aromatic dicarboxylic
acid and alkane diamine
(G) Aromatic polyester
(G)
Alkyl
bis(methoxymethyl)
hydrocarbomocycle
(S) Oils, Macrocystis pyrifera
03/04/10
06/01/10
CBI
P–10–0266
03/04/10
06/01/10
CBI
P–10–0267
P–10–0268
P–10–0269
03/05/10
03/05/10
03/09/10
06/02/10
06/02/10
06/06/10
CBI
CBI
CBI
P–10–0270
P–10–0271
03/10/10
03/12/10
06/07/10
06/09/10
CBI
CBI
P–10–0272
03/10/10
06/07/10
Robertet, Inc.
P–10–0273
03/12/10
06/09/10
CBI
(S) As an odoriferous component of
fragrance compounds
(G) Treatment for textiles
P–10–0274
03/12/10
06/09/10
CBI
(G) Adhesive component
P–10–0275
03/15/10
06/12/10
CBI
(G) Material for electronic parts
P–10–0276
P–10–0277
03/15/10
03/15/10
06/12/10
06/12/10
CBI
CBI
(G) Antiswelling agent for clay
(G) Material for electronic parts
P–10–0278
03/15/10
06/12/10
CBI
(G) Material for electronic parts
P–10–0279
03/15/10
06/12/10
CBI
(G) Material for electronic parts
P–10–0280
03/15/10
06/12/10
CBI
P–10–0281
03/17/10
06/14/10
CBI
(G) Adhesion promoter, corrosion inhibitor
(G) Component of foam
P–10–0282
03/17/10
06/14/10
CBI
P–10–0283
03/17/10
06/14/10
CBI
P–10–0284
P–10–0285
03/17/10
03/17/10
06/14/10
06/14/10
P–10–0286
03/19/10
06/16/10
P–10–0287
03/19/10
06/16/10
P–10–0288
03/19/10
06/16/10
P–10–0289
03/18/10
06/15/10
P–10–0290
03/22/10
06/19/10
CBI
Syngenta Crop Protection, Inc.
Instrumental polymer
technologies, LLC.
Instrumental Polymer
Technologies, LLC.
Instrumental Polymer
Technologies, LLC.
Instrumental Polymer
Technologies, LLC.
Reichhold, Inc.
P–10–0291
erowe on DSK5CLS3C1PROD with NOTICES
P–10–0265
03/23/10
06/20/10
FRX Polymers, Inc.
P–10–0292
03/23/10
06/20/10
CBI
(S) Base resin for gel coat compounds (used in FRP applications)
(G) FRX phosphonate oligomer is a
non-halogenated flame retardant
additive that addresses the need to
replace current commercial bromide-containing flame retardant additives that are being phased out
due to environmental regulation.
Flame retardants are required to
meet fire safety standards in order
to reduce flammability of combustible materials.
(G) Lubricant oil additive
P–10–0293
03/23/10
06/20/10
CBI
(G) Additive
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
PO 00000
(G) Laundry detergent component
(G) Laundry detergent component
(S) Extrusion of tubing systems; injection molding of special applications
(G) Raw material
(G) Material for electronic parts
Frm 00022
(G) Component in injection molded
parts
(G) Component in injection molded
parts
(G) Chemical intermediate
(S) Intermediate
(G) Resin for coatings
(G) Resin for coatings
(G) Resin for coatings
(G) Resin for coatings
Fmt 4703
Sfmt 4703
E:\FR\FM\09JNN1.SGM
(G) Perfluoroalkylethyl methacrylate
copolymer
(G)
1,1′methylenebis[isocyanatobenzene],
polymer with polyester polyols and
a polyether polyol
(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidene
polycarbomonocycle
(G) Polyethylene polyammonium salt
(G)
[5,5′-biisobenzofuran]-1,1′,3,3′tetrone,
polymer
with
1,4benzenediamine,
4,4′oxybis[benzenamine]
and
alkylaminosiloxane
(G) Polycarbomono cyclic sulphonium
camphosulphonate
(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidyne
polycarbomocycle
(G) Aluminum B-alanine complex
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
(G) Maleated nylon graft copolymer
(G) Maleated nylon graft copolymer
(G) Boron ester
(S)
Benzoic
acid,
3-amino-2mercapto(G)
Hydroxyl-terminated
aliphatic
polycarbonate
(G)
Hydroxyl-terminated
aliphatic
polycarbonate
(G)
Hydroxyl-terminated
aliphatic
polycarbonate
(G)
Hydroxyl-terminated
aliphatic
polycarbonate
(G) Methacrylate terminated polyester
(S) CA index name of respective
polymer: Phosphonic acid, p-methyl-, diphenyl ester, polymer with
4,4′(1methylethylidene)bis[phenol]
(G) Alkanoic acid, mixed esters with
dipentaerythritol and pentaerythritol
(G) Methacrylate copolymer
09JNN1
32757
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 03/01/10 TO 04/23/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
03/24/10
03/25/10
06/21/10
06/22/10
Scott bader, Inc.
CBI
(G) Resin or resin additive
(G) Component of foam
P–10–0296
P–10–0297
P–10–0298
P–10–0299
P–10–0300
P–10–0301
03/26/10
03/26/10
03/26/10
03/26/10
03/26/10
03/25/10
06/23/10
06/23/10
06/23/10
06/23/10
06/23/10
06/22/10
3M
3M
3M
3M
3M
Robertet, Inc.
P–10–0302
P–10–0303
03/29/10
03/30/10
06/26/10
06/27/10
CBI
CBI
(G) Fluorinated chemical intermediate
(G) Fluorinated chemical intermediate
(G) Fluorinated intermediate
(G) Fluorinated intermediate
(G) Fluorinated emulsifier
(S) As an odoriferous component of
fragrance compounds
(G) Destructive use in fuels
(G) Constituent in ink formulation
P–10–0304
03/30/10
06/27/10
CBI
P–10–0305
03/29/10
06/26/10
CBI
(S) Acid dye for coloring anodized
aluminum
(G) Paint component
P–10–0306
P–10–0307
P–10–0308
03/30/10
03/30/10
03/30/10
06/27/10
06/27/10
06/27/10
CBI
Dubois Chemicals Inc.
Oleon Americas, Inc.
(S) Binder for car repair putty
(S) Industrial boiler treatment
(G) Industrial hydraulic fluid
P–10–0309
03/30/10
06/27/10
CBI
P–10–0310
03/30/10
06/27/10
Futurefuel Chemical
Company
P–10–0310
03/30/10
06/27/10
Futurefuel Chemical
Company
P–10–0311
P–10–0312
04/01/10
04/01/10
06/29/10
06/29/10
CBI
Akzo Nobel Coatings
Inc.
(S) Acid dye for coloring anodized
aluminum
(S) Monomer in alkyl resins; monomer in surfactants solvent; antifreeze in paints and coatings;
coalecing aid - inks and coatings
(S) Monomer in alkyl resins; monomer in surfactants solvent; antifreeze in paints and coatings;
coalecing aid - inks and coatings
(S) Release agent
(S) Dispersant for the preparation of
stir-in pigments in car paints
P–10–0313
04/01/10
06/29/10
P–10–0314
03/23/10
06/20/10
ICI Performance Products LP
Sasol Chemicals North
America, LLC
P–10–0315
P–10–0316
03/31/10
03/31/10
06/28/10
06/28/10
CBI
CBI
P–10–0317
P–10–0318
P–10–0319
03/31/10
04/02/10
04/02/10
06/28/10
06/30/10
06/30/10
CBI
3M Company
CBI
P–10–0320
erowe on DSK5CLS3C1PROD with NOTICES
P–10–0294
P–10–0295
04/02/10
06/30/10
CBI
(G) Open, non-dispersive use
P–10–0321
P–10–0322
P–10–0323
04/02/10
04/02/10
03/15/10
06/30/10
06/30/10
06/12/10
CBI
CBI
Canon U.S.A., Inc.
(G) Concrete additive
(G) Concrete additive
(G) Additive for ink jet printing ink
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
PO 00000
Frm 00023
(S) Opacifying pigment for ceramic
whiteware
(S) Printing ink component, acts as
gallant, rheological modifier; for industrial use only; no known consumer uses
(S) Release agent
(G) Monomer for polymer for textile
treatment additive
(G) Paper treatment additive
(S) Dispersant
(G) Polyamide phenol for coatings,
open, non-dispersive use
Fmt 4703
Sfmt 4703
E:\FR\FM\09JNN1.SGM
Chemical
(G) Unsaturated urethane acrylate
(G) Fattay acid polymer with aliphatic
diol and aromatic diacid
(G) Fluorinated carboxylic acid
(G) Fluorinated alcohol
(G) Fluorinated carboxylate ester
(G) Perfluoroalkoxyalkyl vinyl ether
(G) Fluorinated surfactant
(S) Oils, laminaria digitata
(G) Fatty acid amine salt
(G) Heterocycle, disubstituted, salt
with anion (1:1)
(G) Product is a trivalent chrome
complex of an azo dye
(S) Acetic acid ethenyl ester, polymer
with ethane and methyl 2-methyl-2propenoate
(G) Unsaturated polyester resin
(G) Powdered amine
(S) Fatty acids, C16–18 and C18-unsaturated, mixed esters with adipic
acid and trimethylolpropane
(G) Product is a trivalent chrome
complex of an azo dye
(S) Glycerol formal 5-hydroxy-1,3dioxane
(S) Glycerol formal isomeric mixture
of 4-hydroxymethyl-1,3-dioxolane
(G) Alkyl alkoxy siloxane
(S) 2,5-furandione, telomer with
ethenylbenzene
and
(1methylethyl)benzenem imides with
polyethylene-polypropylene glycol
2-aminopropyl me ether
(S) Diphosphoric acid, calcium salt
(1:1)
(S) Aluminum, (2-butanolato)bis[ethyl3-(oxo-,
.kappa.,O)butanoato,.kappa.,O′](G) Me alkyl siloxane
(G) Perfluoroalkyl acrylate
(G) Fluoroalkyl acrylate copolymer
(G) Propylene oxide ligand
(G) Aromatic halogenated acid, polymer with a halogenated aromatic
diamine and an aromatic phenolic
amine
(G) Aromatic dianhydride, polymer
with an aromatic diamine and an aliphatic unsaturated ester
(G) Modified phenol resin
(G) Modified phenol resin
(G) Alkyl methacrylate polymer with
branched benzene, alkyl acrylate,
hydroxyalkyl methacrylate, methacrylic acid and substituted methacrylate, alkaline metal salt
09JNN1
32758
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 03/01/10 TO 04/23/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G)
Urea,
N,N′-(methyl-1,3-phenylene)bis[N′,N′-bis[3(polyalkyleneamino]-,
compound
with formaldehyde polymer with
phenol
(G) Neodymium ziegler-natta catalyst
04/01/10
06/29/10
CBI
(S) Curing agent or accelerator for
epoxy resin
P–10–0325
04/05/10
07/03/10
04/02/10
04/02/10
04/05/10
06/30/10
06/30/10
07/03/10
The Goodyear Tire
and Rubber Company
CBI
CBI
H.B. Fuller
(S) Polymerization catalyst
P–10–0326
P–10–0327
P–10–0328
P–10–0329
04/05/10
07/03/10
CBI
(G) Finishing agent for textile goods
P–10–0330
04/05/10
07/03/10
CBI
(G) Component of fragrance mixture
for highly dispersive applications.
P–10–0331
04/05/10
07/03/10
Reichhold, Inc.
(S) Carrier resin for coatings
P–10–0332
P–10–0333
04/06/10
04/06/10
07/04/10
07/04/10
CBI
CBI
(S) Polyol for rigid foam
(S) Industrial monomer to be polymerized or reacted.
P–10–0334
04/06/10
07/04/10
CBI
P–10–0335
P–10–0336
04/06/10
04/06/10
07/04/10
07/04/10
CBI
CBI
P–10–0337
04/06/10
07/04/10
CBI
P–10–0338
P–10–0339
P–10–0340
04/06/10
04/06/10
04/05/10
07/04/10
07/04/10
07/03/10
CBI
CBI
Henkel adhesives
(S) Industrial monomer to be polymerized or reacted.
(G) Metal coating(surface treatment)
(G) Reactive diluent for unsaturated
polyester and vinyl ester
(G) Reactive diluent for unsaturated
polyester and vinyl ester
(G) Laundry detergent component
(G) Laundry detergent component
(S) Hot melt adhesive
P–10–0341
P–10–0342
04/05/10
04/06/10
07/03/10
07/04/10
CBI
Bimax Inc.
P–10–0343
04/09/10
07/07/10
P–10–0344
04/05/10
07/03/10
Marubeni Specialty
Chemicals Inc.
CBI
P–10–0345
04/16/10
07/14/10
CBI
(G) Plasticizing component of a two
part coating
(G) Printing ink additive
P–10–0346
erowe on DSK5CLS3C1PROD with NOTICES
P–10–0324
04/16/10
07/14/10
CBI
(G) Printing ink additive
P–10–0347
04/19/10
07/17/10
CBI
P–10–0348
04/16/10
07/14/10
Dow Chemical Company
(S) Electrical insulating varnish for
motors, generators, transformers
(S) Chemical intermediate
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
PO 00000
Frm 00024
(G) Site-limited intermediate
(G) Site-limited intermediate
(G) Industrial adhesive
(S) Crosslinker for polymers
(S) Intermediate for production of dispersant polymer for paint colorants
(G) Polymeric component
Fmt 4703
Sfmt 4703
E:\FR\FM\09JNN1.SGM
(S) Propane, 1,1,1,2,3,3-hexafluoro(S) 1-propene, 1,2,3,3,3-pentafluoro(G) 2-propenoic acid, 2-mehyl-, alkyl
ester, polymer with ethenyl acetate,
N-(hydroxymethyl)-2-propenamide,
methyl 2-methyl-2-propenoate and
alkyl methacrylate
(S)
Hexadecanamide,
N-[3(hexadecyloxy)-2-hydroxypropyl]-N(2-hydroxyethyl)(G) Trimethylpentene oxymethylpropyl
ester of cyclopropanecarboxylic
acid
(G) Amine salt of vegetable oil, polymer with hydroxy substituted carboxylic acid, aliphatic diisocyanate,
tetra hydroxy alkane and polyol
(G) Amino alcohol substituted phenol
(G) 1,4:3,6-dianhydrohexitol-, reaction
produc6s with chloro-oxopropoxybenzoic
acid
and
hydroxymethoxybenzoic acid
(G) Benzoic acid, (acryloxy)alkoxy-,
1,1′-(methylphenylene) ester
(G) Polyester type urethane resin
(G) Acrylated polyester oligomer
(G) Methacrylated polyester oligomer
(G) Acrylate copolymer
(G) Acrylate copolymer
(S) Fatty acids, C18-unsaturated,
dimers, polymers with ethylenediamine, piperazine, polypropylene
glycol diamine, sebacic acid and
tall-oil fatty acids
(G) Polyether polycarbodiimide
(G) Poly 2-ethylhexyl methacrylate
(G) Substituted cyclomethacrylate
(G) Phenoxy alkyl ether
(G) Hexanoic acid, 6-[[2-[[5-[[2,7dihydro-3-methyl-2,7-dioxo-1-(3sulfobenzoyl)-heteropolycycle-6yl]amino]-2,4-disulfophenyl]amino]2-oxoethyl]amino]-, ammonium sodium salt (1:?:?)
(G) Copper, phthalic anhydride-2,3pyridinedicarboxylic acid-urea reaction
products
complexes,
aminosulfonylsulfo[[2-[[4-[(2sulfoethyl)amino]-6-[(4sulfophenyl)amino]monoheterocycle-2yl]amino]ethyl]amino]sulfonyl
derivates, sodium salts
(G) Modified polyester
(G) Cyclic nitrile aldehyde
09JNN1
32759
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 03/01/10 TO 04/23/10—Continued
Received
Date
Case No.
Projected
Notice
End Date
P–10–0349
04/16/10
07/14/10
P–10–0350
04/16/10
07/14/10
P–10–0351
04/16/10
07/14/10
Manufacturer/Importer
Dow Chemical Company
Dow Chemical Company
Zeon Chemicals L.P.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(S) Chemical intermediate
(G) Cyclic nitrile aldehyde
(S) Chemical intermediate
(G) Cyclic nitrile aldehyde
(S) Automotive seals and gaskets
(G) Modified acrylonitrile, butadiene
polymer, hydrogenated
CBI) on the Notices of Commencement
to manufacture received:
II. 57 NOTICES OF COMMENCEMENT FROM: 03/01/10 TO 04/23/10
Case No.
Received Date
Commencement
Notice End Date
03/08/10
01/28/10
P–03–0568
03/08/10
01/28/10
P–03–0789
P–06–0393
P–06–0494
P–06–0598
P–06–0825
03/22/10
03/18/10
03/01/10
03/08/10
04/20/10
03/09/10
02/10/10
02/23/10
03/01/10
03/24/10
P–06–0832
P–06–0833
P–06–0834
P–07–0328
P–07–0425
P–07–0690
P–08–0125
04/16/10
04/16/10
04/16/10
03/05/10
04/09/10
04/12/10
03/30/10
03/31/10
03/19/10
03/22/10
02/12/10
03/16/10
04/02/10
03/05/10
P–08–0138
P–08–0165
P–08–0561
P–08–0647
04/14/10
04/16/10
04/16/10
03/08/10
03/30/10
05/21/08
11/25/08
02/23/10
P–08–0672
P–09–0058
P–09–0179
03/26/10
03/23/10
04/07/10
03/02/10
03/04/10
04/02/10
P–09–0269
P–09–0332
P–09–0371
P–09–0372
P–09–0381
P–09–0418
P–09–0463
03/11/10
04/21/10
03/03/10
03/08/10
03/17/10
03/22/10
03/18/10
03/08/10
04/08/10
01/31/10
02/23/10
02/19/10
03/01/10
02/14/10
P–09–0500
03/02/10
01/23/10
P–09–0525
P–09–0526
P–09–0562
erowe on DSK5CLS3C1PROD with NOTICES
P–03–0481
04/06/10
04/06/10
03/01/10
03/18/10
03/18/10
02/16/10
P–09–0597
P–09–0634
P–09–0647
03/08/10
04/05/10
03/05/10
02/23/10
03/16/10
02/05/10
P–09–0649
04/16/10
04/08/10
P–09–0650
03/08/10
02/18/10
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
PO 00000
Chemical
(S)
5,2,6-(iminomethenimino)-1H-imidazo[4,5-b]pyrazine,
octahydro1,3,4,7,8,10-hexanitro(S)
5,2,6-(iminomethenimino)-1H-imidazo[4,5-b]pyrazine,
1,3,8,10tetraacetyloctahydro(G) Derivatized butyl ester photoinitiator
(G) Aliphatic urethane acrylate oligomer
(G) Fluoroalkyl methacrylate copolymer
(G) Polyester polyol urethane modified epoxy resin
(G) Oxepanone, polymer with dialkyl-alkanediol, alkyl-(hydroxyaalkyl)alkanediol, carbocycle, isocyanato-(isocyanatoalkyll)-trialkyl-, alkanoic acid,
hydroxy-(hydroxyalkyl)-alkyl-,
alkylamine,
N,N-dialkyl-,
aminoalkyltrialkylcarbocyclicamine, and alkyldiamine
(S) Fatty acids, palm-oil, me esters
(S) Fatty acids, peanut-oil, me esters
(S) Fatty acids, linseed-oil, me esters
(G) NCS 2: Substituted phenol
(G) MDI polyether prepolymer
(G) Polyester amine adduct
(G) Methacrylate ester of a polyester from an aromatic dicarboxylate and alkyl
polyols
(S) Carbonotrithioic acid, bis(phenylmethyl)ester
(G) Extract of tea
(G) Cycloalkyl piperonyl ether
(S) Extractives and their physically modified derivatives. Jasminum sambac.
Oils, jasmine, jasminum sambac
(G) Polyester polyurethane aqueous dispersion
(G) Alkenylsuccinicanhydride derivative
(G) Fatty acids, dimers, polymers with dihydroxyfunctional monocarboxylic acid,
alkane diol, alkyl isocyanate, alkanediol, aromatic anhydride, glycol ether and
alkanetriol, compounds with amino alcohol
(G) Crosslinked polystyrene resin with chelating bispicolylamine groups
(G) Phosphonic acid ester
(G) Organic acid metal halide complex
(S) Oils, spartium junceum
(G) Polycarbonate diol
(G) Surface modified aluminum hydroxide
(G) Salt of polymer of methylenebis[isocyanatocarbomonocycle],alkanepolyols
and amine derivatives
(G)
1,4-benzenedisulfonic
acid,
2,2′-[1,2-ethenediylbis[(3-sulfo-4,1-phenylene)imino[6-[bis(alkanol)amino]-1,3,5-triazine-4,2-diyl]imino]]bis-,
hexasodium salt
(G) Hydroxyamino aryl amine
(G) Hydroxyamino aryl triamine
(G) Polymer of acrylamido alkyl propane sulfonic acid sodium ammonium salt
and two acrylic monomers
(S) Oils, cypress, cypressus funebris
(S) Phenol, 4-(1,1-dimethylethyl)-2-nitro(G) Fatty acids, C18-unsaturted, dimers, polymers with glycidyl alkanoate, 4oxopentanoic acid and trimethylolpropane
(G) 2,5-furandione, polymer with alkene, alkyl ester, substituted imidazoline
amide
(G) Dimer fatty acid based polyester polyurethane
Frm 00025
Fmt 4703
Sfmt 4703
E:\FR\FM\09JNN1.SGM
09JNN1
32760
Federal Register / Vol. 75, No. 110 / Wednesday, June 9, 2010 / Notices
II. 57 NOTICES OF COMMENCEMENT FROM: 03/01/10 TO 04/23/10—Continued
Case No.
Commencement
Notice End Date
Received Date
P–10–0035
P–10–0041
P–10–0051
04/16/10
03/12/10
03/17/10
03/17/10
02/11/10
03/10/10
P–10–0053
P–10–0074
04/02/10
04/19/10
03/26/10
03/23/10
P–10–0075
P–10–0077
P–10–0078
P–10–0082
P–10–0085
P–10–0100
P–10–0102
P–10–0103
04/06/10
03/11/10
03/08/10
03/18/10
03/16/10
03/25/10
04/01/10
04/19/10
03/11/10
03/04/10
02/27/10
02/27/10
03/05/10
03/21/10
03/24/10
03/26/10
P–10–0140
P–10–0142
P–10–0143
P–10–0147
P–10–0149
P–10–0165
P–99–0332
04/16/10
04/12/10
04/08/10
04/19/10
04/19/10
04/19/10
03/18/10
03/31/10
04/01/10
04/02/10
04/03/10
04/07/10
04/09/10
03/01/10
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: May 14, 2010.
Darryl S. Ballard,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2010–13627 Filed 6–8–10; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2010–0456 FRL–8829–7]
Certain New Chemicals; Receipt and
Status Information
erowe on DSK5CLS3C1PROD with NOTICES
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
VerDate Mar<15>2010
15:10 Jun 08, 2010
Jkt 220001
Chemical
(G) Sodium carboxylate
(G) Polyether polyacid comb polymer
(S)
Starch,
2-carboxyethyl
2-methyl-3-oxo-3-[[3(trimethylammonio)propyl]amino]propyl ether, chloride
(G) Halogenated aromatic amine
(G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2-propen -1-yl)oxy]ethyl ester,
polymer with butyl 2-methyl-2-propenoate, ethenylbenzene, 2-ethylhexyl 2propenoate, methyl 2-methyl-2-propenoate, phosphoric acid, di-ester with hydroxy ethyl methacrylate and 2-(phosphonooxy) ethyl 2-methyl-2-propenoate
(G) Brominated aromatic polyether polyester
(G) Linear hydroxy funtional polyester
(G) Capped polyurethane adduct
(S) 1,2,3-propanetriol, homopolymer, hexadecanoate octadecanoate
(G) Bismuth salt of lactic acid
(G) Polyester amine compound
(S) Oils, jasmine, jasminum sambac
(S) Fatty acids, C18-unsaturated, di-me esters, hydrogenated, polymers with
diethylene glycol, 1,6-diisocyanato-2,2,4-trimethylhexane, 1,6-diisocyanato2,4,4-trimethylhexane,
2-heptyl-3,4-bis(9-isocyanatononyl)-1pentylcyclohexane, 1,1′-methylenebis[4-isocyanatobenzene], 2-oxepanone
and tricyclodecanedimethanol, 2-hydroxyethyl acrylate-blocked
(G) Urethane modified epoxy resin
(G) Furan, 2-(1,1-dimethylethyl)-2, 5-dihydro-alkyl substituted
(G) Hydroxyl-terminated aliphatic polycarbonate
(G) Alkoxylated alkylamine
(G) Alkoxylated alkylamine salt
(G) Polyester resin
(G) Urethane modified aromatic isocyanate
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from April 26, 2010 to
May 7, 2010, consists of the PMNs and
TME, both pending or expired, and the
notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before July 9,
2010.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2010–0456, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2010–0456.
The DCO is open from 8 a.m. to 4 p.m.,
PO 00000
Frm 00026
Fmt 4703
Sfmt 4703
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2010–0456. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
E:\FR\FM\09JNN1.SGM
09JNN1
]]>Agencies
[Federal Register Volume 75, Number 110 (Wednesday, June 9, 2010)]
[Notices]
[Pages 32754-32760]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-13627]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2010-0408; FRL-8825-5]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from March 1, 2010 to April 23, 2010, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 9, 2010.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2010-0408, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Chemical
Safety and Pollution Prevention (OPPT), Environmental Protection
Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2010-0408. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2010-0408. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index
available at https://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at https://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
legal holidays. The telephone number of the EPA/DC Public Reading Room
is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division (7407M), Office of
Chemical Safety and Pollution Prevention Environmental Protection
Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001;
telephone number: (202) 564-8951; fax number: (202) 546-8955; e-mail
address: mudd.bernice@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket.
[[Page 32755]]
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from March 1, 2010 to April 23, 2010,
consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs, both pending or expired,
and the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period. If
you are interested in information that is not included in the following
tables, you may contact EPA as described in Unit II. to access
additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 100 Premanufacture Notices Received From: 03/01/10 to 04/23/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-10-0253 03/01/10 05/29/10 CBI (G) Thermoset molding (G) Methacrylate
compound; ester capped
Nondispersive use aromatic ether
polymer
P-10-0254 03/01/10 05/29/10 Piedmont Chemical (S) Ultra violet (S) 2-propenoic acid,
Industries I, LLC. curable wood 2-methyl-, 2-
coatings; ultra hydroxyethyl ester,
violet curable metal reaction products
coatings with
dicyclopentadiene, 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexane
, maleic anhydride
and 2-methyl-1,3-
propanediol
P-10-0255 03/01/10 05/29/10 Piedmont Chemical (S) Ultra violet (S) 2-propenoic acid,
Industries I, LLC curable wood 2-hydroxyethyl
coatings; ultra ester, reaction
violet curable metal products with
coatings dicyclopentadiene, 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexane
, maleic anhydride
and 2-methyl-1,3-
propanediol
P-10-0256 03/01/10 05/29/10 CBI (S) Coupling agent (S) Titanium, Bu alc.
for plastics; 2-ethyl-1-hexanol
coupling agent for oleate stearate
rubbers complexes
P-10-0257 03/01/10 05/29/10 CBI (S) Polyurethane (S) 1,4-butanediol,
elastomer polymer with 2,4-
diisocyanato-1-
methylbenzene and
.alpha.-hydro-
.omega.-
hydroxypoly[oxy(meth
yl-1,2-ethanediyl)]
P-10-0258 03/01/10 05/29/10 CBI (G) Pigment additive (G) Sulfonated
heteropolycycle
P-10-0259 03/01/10 05/29/10 CBI (G) Pigment additive (G) Sulfonated
heteropolycycle
P-10-0260 03/02/10 05/30/10 H.B. Fuller (G) Industrial (G) Isocyanate-
adhesive functional
polyurethane
prepolymer
P-10-0261 03/02/10 05/30/10 H.B. Fuller (G) Industrial (G) Isocyanate-
adhesive functional
polyurethane
prepolymer
P-10-0262 03/02/10 05/30/10 Piedmont Chemical (S) Ultra violet (S) Fatty acids, C18-
Industries I, LLC curable inks unsaturated, dimers,
hydrogenated, bi[3-
[(1-oxo-2-propen-1-
yl)oxy]-2,2-bis[[(1-
oxo-2-propen-1-
yl)oxy]methyl]propyl
] esters
P-10-0263 03/04/10 06/01/10 Marubeni Specialty (G) Polymeric (G) Substituted
Chemicals Inc. component cyclomethacrylate
P-10-0264 03/04/10 06/01/10 CBI (G) Monomer (G) Methacrylate
ester of fatty
alcohol alkoxylate
[[Page 32756]]
P-10-0265 03/04/10 06/01/10 CBI (S) Coatings for car (G)
leather; water borne Hexamethylenediisocy
industrial coatings anate homopolymer,
like wood alkyl-oxy-terminated
P-10-0266 03/04/10 06/01/10 CBI (S) Antioxidant for (G) Propanoic acid,
plastic articles alkylthio, (1,1-
dimethylethyl) -
[[alkyl-4-hydroxy-2-
alkylphenyl]thio]alk
ylphenyl ester
P-10-0267 03/05/10 06/02/10 CBI (G) Laundry detergent (G) Acrylate
component copolymer
P-10-0268 03/05/10 06/02/10 CBI (G) Laundry detergent (G) Acrylate
component copolymer
P-10-0269 03/09/10 06/06/10 CBI (S) Extrusion of (G) Polymer of
tubing systems; aromatic
injection molding of dicarboxylic acid
special applications and alkane diamine
P-10-0270 03/10/10 06/07/10 CBI (G) Raw material (G) Aromatic
polyester
P-10-0271 03/12/10 06/09/10 CBI (G) Material for (G) Alkyl
electronic parts bis(methoxymethyl)hy
drocarbomocycle
P-10-0272 03/10/10 06/07/10 Robertet, Inc. (S) As an odoriferous (S) Oils, Macrocystis
component of pyrifera
fragrance compounds
P-10-0273 03/12/10 06/09/10 CBI (G) Treatment for (G)
textiles Perfluoroalkylethyl
methacrylate
copolymer
P-10-0274 03/12/10 06/09/10 CBI (G) Adhesive (G) 1,1'-
component methylenebis[isocyan
atobenzene], polymer
with polyester
polyols and a
polyether polyol
P-10-0275 03/15/10 06/12/10 CBI (G) Material for (G) Substituted
electronic parts polyhydro-oxo-
naphthalene
sulfonate with
alkylidene
polycarbomonocycle
P-10-0276 03/15/10 06/12/10 CBI (G) Antiswelling (G) Polyethylene
agent for clay polyammonium salt
P-10-0277 03/15/10 06/12/10 CBI (G) Material for (G) [5,5'-
electronic parts biisobenzofuran]-
1,1',3,3'-tetrone,
polymer with 1,4-
benzenediamine, 4,4'-
oxybis[benzenamine]
and
alkylaminosiloxane
P-10-0278 03/15/10 06/12/10 CBI (G) Material for (G) Polycarbomono
electronic parts cyclic sulphonium
camphosulphonate
P-10-0279 03/15/10 06/12/10 CBI (G) Material for (G) Substituted
electronic parts polyhydro-oxo-
naphthalene
sulfonate with
alkylidyne
polycarbomocycle
P-10-0280 03/15/10 06/12/10 CBI (G) Adhesion (G) Aluminum B-
promoter, corrosion alanine complex
inhibitor
P-10-0281 03/17/10 06/14/10 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
P-10-0282 03/17/10 06/14/10 CBI (G) Component in (G) Maleated nylon
injection molded graft copolymer
parts
P-10-0283 03/17/10 06/14/10 CBI (G) Component in (G) Maleated nylon
injection molded graft copolymer
parts
P-10-0284 03/17/10 06/14/10 CBI (G) Chemical (G) Boron ester
intermediate
P-10-0285 03/17/10 06/14/10 Syngenta Crop (S) Intermediate (S) Benzoic acid, 3-
Protection, Inc. amino-2-mercapto-
P-10-0286 03/19/10 06/16/10 Instrumental polymer (G) Resin for (G) Hydroxyl-
technologies, LLC. coatings terminated aliphatic
polycarbonate
P-10-0287 03/19/10 06/16/10 Instrumental Polymer (G) Resin for (G) Hydroxyl-
Technologies, LLC. coatings terminated aliphatic
polycarbonate
P-10-0288 03/19/10 06/16/10 Instrumental Polymer (G) Resin for (G) Hydroxyl-
Technologies, LLC. coatings terminated aliphatic
polycarbonate
P-10-0289 03/18/10 06/15/10 Instrumental Polymer (G) Resin for (G) Hydroxyl-
Technologies, LLC. coatings terminated aliphatic
polycarbonate
P-10-0290 03/22/10 06/19/10 Reichhold, Inc. (S) Base resin for (G) Methacrylate
gel coat compounds terminated polyester
(used in FRP
applications)
P-10-0291 03/23/10 06/20/10 FRX Polymers, Inc. (G) FRX phosphonate (S) CA index name of
oligomer is a non- respective polymer:
halogenated flame Phosphonic acid, p-
retardant additive methyl-, diphenyl
that addresses the ester, polymer with
need to replace 4,4'(1methylethylide
current commercial ne)bis[phenol]
bromide-containing
flame retardant
additives that are
being phased out due
to environmental
regulation. Flame
retardants are
required to meet
fire safety
standards in order
to reduce
flammability of
combustible
materials.
P-10-0292 03/23/10 06/20/10 CBI (G) Lubricant oil (G) Alkanoic acid,
additive mixed esters with
dipentaerythritol
and pentaerythritol
P-10-0293 03/23/10 06/20/10 CBI (G) Additive (G) Methacrylate
copolymer
[[Page 32757]]
P-10-0294 03/24/10 06/21/10 Scott bader, Inc. (G) Resin or resin (G) Unsaturated
additive urethane acrylate
P-10-0295 03/25/10 06/22/10 CBI (G) Component of foam (G) Fattay acid
polymer with
aliphatic diol and
aromatic diacid
P-10-0296 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated
chemical carboxylic acid
intermediate
P-10-0297 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated
chemical alcohol
intermediate
P-10-0298 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated
intermediate carboxylate ester
P-10-0299 03/26/10 06/23/10 3M (G) Fluorinated (G)
intermediate Perfluoroalkoxyalkyl
vinyl ether
P-10-0300 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated
emulsifier surfactant
P-10-0301 03/25/10 06/22/10 Robertet, Inc. (S) As an odoriferous (S) Oils, laminaria
component of digitata
fragrance compounds
P-10-0302 03/29/10 06/26/10 CBI (G) Destructive use (G) Fatty acid amine
in fuels salt
P-10-0303 03/30/10 06/27/10 CBI (G) Constituent in (G) Heterocycle,
ink formulation disubstituted, salt
with anion (1:1)
P-10-0304 03/30/10 06/27/10 CBI (S) Acid dye for (G) Product is a
coloring anodized trivalent chrome
aluminum complex of an azo
dye
P-10-0305 03/29/10 06/26/10 CBI (G) Paint component (S) Acetic acid
ethenyl ester,
polymer with ethane
and methyl 2-methyl-
2-propenoate
P-10-0306 03/30/10 06/27/10 CBI (S) Binder for car (G) Unsaturated
repair putty polyester resin
P-10-0307 03/30/10 06/27/10 Dubois Chemicals Inc. (S) Industrial boiler (G) Powdered amine
treatment
P-10-0308 03/30/10 06/27/10 Oleon Americas, Inc. (G) Industrial (S) Fatty acids,
hydraulic fluid C16 18 and C18-
unsaturated, mixed
esters with adipic
acid and
trimethylolpropane
P-10-0309 03/30/10 06/27/10 CBI (S) Acid dye for (G) Product is a
coloring anodized trivalent chrome
aluminum complex of an azo
dye
P-10-0310 03/30/10 06/27/10 Futurefuel Chemical (S) Monomer in alkyl (S) Glycerol formal 5-
Company resins; monomer in hydroxy-1,3-dioxane
surfactants solvent;
antifreeze in paints
and coatings;
coalecing aid - inks
and coatings
P-10-0310 03/30/10 06/27/10 Futurefuel Chemical (S) Monomer in alkyl (S) Glycerol formal
Company resins; monomer in isomeric mixture of
surfactants solvent; 4-hydroxymethyl-1,3-
antifreeze in paints dioxolane
and coatings;
coalecing aid - inks
and coatings
P-10-0311 04/01/10 06/29/10 CBI (S) Release agent (G) Alkyl alkoxy
siloxane
P-10-0312 04/01/10 06/29/10 Akzo Nobel Coatings (S) Dispersant for (S) 2,5-furandione,
Inc. the preparation of telomer with
stir-in pigments in ethenylbenzene and
car paints (1-
methylethyl)benzenem
imides with
polyethylene-
polypropylene glycol
2-aminopropyl me
ether
P-10-0313 04/01/10 06/29/10 ICI Performance (S) Opacifying (S) Diphosphoric
Products LP pigment for ceramic acid, calcium salt
whiteware (1:1)
P-10-0314 03/23/10 06/20/10 Sasol Chemicals North (S) Printing ink (S) Aluminum, (2-
America, LLC component, acts as butanolato)bis[ethyl-
gallant, rheological 3-(oxo-,
modifier; for .kappa.,O)butanoato-
industrial use only; ,.kappa.,O']-
no known consumer
uses
P-10-0315 03/31/10 06/28/10 CBI (S) Release agent (G) Me alkyl siloxane
P-10-0316 03/31/10 06/28/10 CBI (G) Monomer for (G) Perfluoroalkyl
polymer for textile acrylate
treatment additive
P-10-0317 03/31/10 06/28/10 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-10-0318 04/02/10 06/30/10 3M Company (S) Dispersant (G) Propylene oxide
ligand
P-10-0319 04/02/10 06/30/10 CBI (G) Polyamide phenol (G) Aromatic
for coatings, open, halogenated acid,
non-dispersive use polymer with a
halogenated aromatic
diamine and an
aromatic phenolic
amine
P-10-0320 04/02/10 06/30/10 CBI (G) Open, non- (G) Aromatic
dispersive use dianhydride, polymer
with an aromatic
diamine and an
aliphatic
unsaturated ester
P-10-0321 04/02/10 06/30/10 CBI (G) Concrete additive (G) Modified phenol
resin
P-10-0322 04/02/10 06/30/10 CBI (G) Concrete additive (G) Modified phenol
resin
P-10-0323 03/15/10 06/12/10 Canon U.S.A., Inc. (G) Additive for ink (G) Alkyl
jet printing ink methacrylate polymer
with branched
benzene, alkyl
acrylate,
hydroxyalkyl
methacrylate,
methacrylic acid and
substituted
methacrylate,
alkaline metal salt
[[Page 32758]]
P-10-0324 04/01/10 06/29/10 CBI (S) Curing agent or (G) Urea, N,N'-
accelerator for (methyl-1,3-
epoxy resin phenylene)bis[N',N'-
bis[3-
(polyalkyleneamino]-
, compound with
formaldehyde polymer
with phenol
P-10-0325 04/05/10 07/03/10 The Goodyear Tire and (S) Polymerization (G) Neodymium ziegler-
Rubber Company catalyst natta catalyst
P-10-0326 04/02/10 06/30/10 CBI (G) Site-limited (S) Propane,
intermediate 1,1,1,2,3,3-
hexafluoro-
P-10-0327 04/02/10 06/30/10 CBI (G) Site-limited (S) 1-propene,
intermediate 1,2,3,3,3-
pentafluoro-
P-10-0328 04/05/10 07/03/10 H.B. Fuller (G) Industrial (G) 2-propenoic acid,
adhesive 2-mehyl-, alkyl
ester, polymer with
ethenyl acetate, N-
(hydroxymethyl)-2-
propenamide, methyl
2-methyl-2-
propenoate and alkyl
methacrylate
P-10-0329 04/05/10 07/03/10 CBI (G) Finishing agent (S) Hexadecanamide, N-
for textile goods [3-(hexadecyloxy)-2-
hydroxypropyl]-N-(2-
hydroxyethyl)-
P-10-0330 04/05/10 07/03/10 CBI (G) Component of (G) Trimethylpentene
fragrance mixture oxymethylpropyl
for highly ester of
dispersive cyclopropanecarboxyl
applications. ic acid
P-10-0331 04/05/10 07/03/10 Reichhold, Inc. (S) Carrier resin for (G) Amine salt of
coatings vegetable oil,
polymer with hydroxy
substituted
carboxylic acid,
aliphatic
diisocyanate, tetra
hydroxy alkane and
polyol
P-10-0332 04/06/10 07/04/10 CBI (S) Polyol for rigid (G) Amino alcohol
foam substituted phenol
P-10-0333 04/06/10 07/04/10 CBI (S) Industrial (G) 1,4:3,6-
monomer to be dianhydrohexitol-,
polymerized or reaction produc6s
reacted. with chloro-
oxopropoxy-benzoic
acid and hydroxy-
methoxybenzoic acid
P-10-0334 04/06/10 07/04/10 CBI (S) Industrial (G) Benzoic acid,
monomer to be (acryloxy)alkoxy-,
polymerized or 1,1'-
reacted. (methylphenylene)
ester
P-10-0335 04/06/10 07/04/10 CBI (G) Metal (G) Polyester type
coating(surface urethane resin
treatment)
P-10-0336 04/06/10 07/04/10 CBI (G) Reactive diluent (G) Acrylated
for unsaturated polyester oligomer
polyester and vinyl
ester
P-10-0337 04/06/10 07/04/10 CBI (G) Reactive diluent (G) Methacrylated
