Schylling Associates, Inc., Provisional Acceptance of a Settlement Agreement and Order, 30784-30787 [2010-13088]
Download as PDF
30784
Federal Register / Vol. 75, No. 105 / Wednesday, June 2, 2010 / Notices
information to a third party. Section
3506(c)(2)(A) of the PRA (44 U.S.C.
3506(c)(2)(A)) requires Federal agencies
to provide a 60-day notice in the
Federal Register concerning each
proposed collection of information
before submitting the collection to OMB
for approval. To comply with this
requirement, the CPSC is publishing
notice of the proposed collection of
information set forth in this document.
With respect to the following
collection of information, the CPSC
invites comments on these topics: (1)
Whether the proposed collection of
information is necessary for the proper
performance of CPSC’s functions,
including whether the information will
have practical utility; (2) the accuracy of
CPSC’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used; (3)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (4) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques,
when appropriate, and other forms of
information technology.
Title: Safety Standard for Infant Bath
Seats—16 CFR 1215
Description: The rule would require
each infant bath seat to comply with
ASTM F 1967–08a, Standard Consumer
Safety Specification for Infant Bath
Seats.’’ Sections 8 and 9 of ASTM F
1967–08a contain requirements for
marking and instructional literature.
We estimate the burden of this
collection of information as follows:
TABLE 1—ESTIMATED ANNUAL REPORTING BURDEN
Number of
respondents
16 CFR section
sroberts on DSKD5P82C1PROD with NOTICES
1215.2(a) ..............................................................................
There are no capital costs or operating
and maintenance costs associated with
this collection of information.
Our estimates are based on the
following:
Proposed 16 CFR 1215.2(a) would
require each infant bath seat to comply
with ASTM F 1967–08a. Sections 8 and
9 of ASTM F 1967–08a contain
requirements for marking and
instructional literature that are
disclosure requirements, thus falling
within the definition of ‘‘collections of
information’’ at 5 CFR 1320.3(c).
Section 8.6.1 of ASTM F 1967–08a
requires that the name and ‘‘either the
place of business (city, State, and
mailing address, including zip code) or
telephone number, or both’’ of the
manufacturer, distributor, or seller be
clearly and legibly marked on ‘‘each
product and its retail package.’’ Section
8.6.2 of ASTM F 1967–08a requires that
‘‘a code mark or other means that
identifies the date (month and year as a
minimum) of manufacture’’ be clearly
and legibly marked on ‘‘each product
and its retail package.’’ In both cases, the
information must be placed on both the
product and the retail package.
There are three known firms
supplying bath seats to the United
States market. One of the three firms is
known to already produce labels that
comply with sections 8.6.1 and 8.6.2 of
the standard, so there would be no
additional burden on this firm. The
remaining two firms are assumed to
already use labels on both their
products and their packaging, but might
need to make some modifications to
their existing labels. The estimated time
required to make these modifications is
about 30 minutes per model. Each of
these firms supplies an average of one
model of infant bath seat, therefore, the
VerDate Mar<15>2010
19:08 Jun 01, 2010
Jkt 220001
Frequency
of responses
2
1
estimated burden hours associated with
labels is 30 minutes × 2 firms × 1 model
per firm = 60 minutes or 1 annual hour.
The Commission estimates that
hourly compensation for the time
required to create and update labels is
$27.78 (Bureau of Labor Statistics,
September 2009, all workers, goodsproducing industries, Sales and office,
Table 9). Therefore, the estimated
annual cost associated with the
Commission-recommended labeling
requirements is approximately $27.78.
Section 9.1 of ASTM F 1967–08a
requires instructions to be supplied
with the product. Infant bath seats are
products that generally require some
installation and maintenance, and
products sold without such information
would not be able to successfully
compete with products supplying this
information. Under OMB’s regulations
(5 CFR 1320.3(b)(2)), the time, effort,
and financial resources necessary to
comply with a collection of information
that would be incurred by persons in
the ‘‘normal course of their activities’’
are excluded from a burden estimate
where an agency demonstrates that the
disclosure activities needed to comply
are ‘‘usual and customary.’’ Therefore,
because the CPSC is unaware of infant
bath seats that: (a) Generally require
some installation, but (b) lack any
instructions to the user about such
installation, we tentatively estimate that
there are no burden hours associated
with the instruction requirement in
section 9.1 of ASTM F 1967–08a
because any burden associated with
supplying instructions with an infant
bath seat would be ‘‘usual and
customary’’ and not within the
definition of ‘‘burden’’ under OMB’s
regulations.
PO 00000
Frm 00015
Fmt 4703
Sfmt 4703
Total annual
responses
Hours per
response
2
Total burden
hours
0.5
1
Based on this analysis, the
requirements of the bath seat rule would
impose a burden to industry of 1 hour
at a cost of $27.78.
Dated: May 25, 2010.
Todd Stevenson,
Secretary, U.S. Consumer Product Safety
Commission.
[FR Doc. 2010–13087 Filed 6–1–10; 8:45 am]
BILLING CODE 6355–01–P
CONSUMER PRODUCT SAFETY
COMMISSION
[CPSC Docket No. 10–C0004]
Schylling Associates, Inc., Provisional
Acceptance of a Settlement Agreement
and Order
AGENCY: Consumer Product Safety
Commission.
ACTION: Notice.
SUMMARY: It is the policy of the
Commission to publish settlements
which it provisionally accepts under the
Consumer Product Safety Act in the
Federal Register in accordance with the
terms of 16 CFR 1118.20(e). Published
below is a provisionally-accepted
Settlement Agreement with Schylling
Associates, Inc., containing a civil
penalty of $400,000.00.
DATES: Any interested person may ask
the Commission not to accept this
agreement or otherwise comment on its
contents by filing a written request with
the Office of the Secretary by June 17,
2010.
ADDRESSES: Persons wishing to
comment on this Settlement Agreement
should send written comments to the
Comment 10–C0004, Office of the
Secretary, Consumer Product Safety
E:\FR\FM\02JNN1.SGM
02JNN1
Federal Register / Vol. 75, No. 105 / Wednesday, June 2, 2010 / Notices
Commission, 4330 East West Highway,
Room 820, Bethesda, Maryland 20814–
4408.
FOR FURTHER INFORMATION CONTACT: Alex
Dennis, Attorney, Division of
Enforcement and Information, Office of
the General Counsel, Consumer Product
Safety Commission, 4330 East West
Highway, Bethesda, Maryland 20814–
4408; telephone (301) 504–7817.
SUPPLEMENTARY INFORMATION: The text of
the Agreement and Order appears
below.
Dated: May 26, 2010.
Todd A. Stevenson,
Secretary.
United States of America
Consumer Product Safety Commission
CPSC Docket No. 10–C0004
In the Matter of Schylling Associates, Inc.;
Settlement Agreement
1. In accordance with 16 CFR 1118.20,
Schylling Associates, Inc. (‘‘Schylling’’) and
the staff (‘‘Staff’’) of the United States
Consumer Product Safety Commission
(‘‘CPSC’’ or the ‘‘Commission’’) enter into this
Settlement Agreement (‘‘Agreement’’). The
Agreement and the incorporated attached
Order (‘‘Order’’) settle the Staff’s allegations
set forth below.
Parties
2. The Commission is an independent
Federal regulatory agency established
pursuant to, and responsible for the
enforcement of, the Consumer Product Safety
Act, 15 U.S.C. 2051–2089 (‘‘CPSA’’).
3. Schylling is a corporation organized and
existing under the laws of the
Commonwealth of Massachusetts, with
principal offices located in Rowley,
Massachusetts. At all times relevant hereto,
Schylling designed, imported and sold toys
and children’s products.
sroberts on DSKD5P82C1PROD with NOTICES
Staff Allegations
A. Introduction/Distribution in Commerce of
Banned Toys
4. From January 24, 2002 through March
2002, Schylling imported approximately
10,200 units of certain tin pail toys (‘‘Pails’’),
consisting of Thomas and Friends, Curious
George, and Primary Colors (red/yellow)
styles, which had been produced in China by
one of its Hong Kong manufacturers, Eway
Enterprises, Ltd. (‘‘Eway’’). Schylling
distributed approximately 4,700 units of the
Pails to its customers in February and March
2002. The Pails were sold or offered for sale
to consumers at toy stores and gift shops
nationwide in February and March 2002, for
about $6 per unit.
5. Between June 2001 and June 2002,
Schylling imported approximately 66,000
units of certain spinning top toys (‘‘Tops’’),
consisting of Thomas and Friends, Curious
George, and Circus styles, which had been
produced in China by another of its Hong
Kong manufacturers, Sanda Kan Industrial,
Ltd. (‘‘Sanda Kan’’). Schylling distributed
these Tops to its U.S. customers from July
VerDate Mar<15>2010
19:08 Jun 01, 2010
Jkt 220001
2001 until at least September 2002. The Tops
were sold or offered for sale to consumers at
toy stores and gift shops nationwide from
July 2001 until at least September 2002, for
about $13 per unit.
6. Between April 2003 and May 2003,
Schylling imported approximately 3,600
units of certain Winnie-the-Pooh style
spinning top toys, which also had been
produced in China by Sanda Kan. Schylling
distributed these Winnie-the-Pooh tops to its
U.S. customers from April until November
2003. The Winnie-the-Pooh tops were sold or
offered for sale to consumers at toy stores and
gift shops nationwide from April until
November 2003, for about $12 per unit.
7. The Pails, Tops and Winnie-the-Pooh
tops described in paragraphs 4 through 6
above (collectively, the ‘‘Subject Products’’)
are ‘‘consumer product(s),’’ and, at all times
relevant hereto, Schylling was a
‘‘manufacturer’’ of those consumer products,
which were ‘‘distributed in commerce,’’ as
those terms are defined in CPSA sections
3(a)(3), (5), (8), and (11), 15 U.S.C. 2052(a)(3),
(5), (8), and (11).
8. The Subject Products are articles
intended to be entrusted to or for use by
children, and, therefore, are subject to the
requirements of the Commission’s Ban of
Lead-Containing Paint and Certain Consumer
Products Bearing Lead-Containing Paint, 16
CFR Part 1303 (the ‘‘Lead-Paint Ban’’). Under
the Lead-Paint Ban, toys and other children’s
articles must not bear ‘‘lead-containing
paint,’’ defined as paint or other surface
coating materials whose lead content is more
than 0.06 percent of the weight of the total
nonvolatile content of the paint or the weight
of the dried paint film. 16 CFR 1303.2(b)(1) 1
9. On March 7, 2002, as a result of testing
conducted in Hong Kong at its behest,
Schylling obtained a test report from an
independent laboratory demonstrating that
the wooden handles of as many as 12
production samples of the Primary Colors
(red/yellow) style tin pail toys bore paint or
other surface coating materials whose lead
content exceeded the permissible limit of
0.06 percent set forth in the Lead-Paint Ban.
In late March 2002, without furnishing any
copy of the associated test report, Eway
informed Schylling that the supplier of the
yellow and red paints used on the Pails had
conducted re-testing and confirmed that the
paints failed to comply with the Lead-Paint
Ban.
10. Shortly after March 2002, following a
brief evaluation of possibly purchasing
additional pails from Eway having a clear
(lacquer) finish instead of paint, Schylling
reportedly severed its business relationship
with Eway due to the referenced lead paint
test failures. Beginning March 26, 2002,
Schylling, without informing CPSC, initiated
a unilateral recall of the Pails from its
customers, as further discussed in paragraphs
19 and 20 below.
11. On June 30 and July 1, 2002, as a result
of testing conducted in Hong Kong at its
behest, Schylling obtained three test reports
1 At the time of the alleged violations stated in
this Settlement Agreement, the permissible limit of
0.06 percent was in effect for the Lead-Paint Ban.
As of August 14, 2009, the limit was amended to
0.009 percent pursuant to 15 U.S.C. 1278a(f)(1).
PO 00000
Frm 00016
Fmt 4703
Sfmt 4703
30785
from an independent laboratory
demonstrating that the wooden handles of
production samples from each of the Thomas
and Friends, Curious George, and Circus
style spinning top toys respectively,
representing altogether as many as 9 samples,
bore paint or other surface coating materials
whose lead content exceeded the permissible
limit of 0.06 percent set forth in the LeadPaint Ban. On July 15, 2002, as a result of retesting conducted in Hong Kong at its behest,
Schylling obtained an additional three failing
test reports from an independent laboratory
that confirmed the June 30th and July 1st
results with respect to another set of
production samples from each of these three
styles of spinning top toys. For the reasons
further discussed in paragraphs 21 and 22
below, however, Schylling reportedly
concluded at the time that it had resolved the
lead-containing paint problem before any
non-compliant Tops were imported into the
United States. In order to avoid any lead-inpaint problems in the future, Schylling then
instructed its manufacturer, Sanda Kan, that
henceforth all spinning top toys had to be
made with unpainted plastic rather than
wooden handles, and had to pass applicable
testing for the presence of lead.
12. Some five years later, in early August
2007, a Chicago Tribune news reporter
contacted Schylling and informed it that a
sample of the Thomas and Friends style Top,
purchased from a U.S. consumer via a Web
site, had been tested by an independent
laboratory for the presence of lead-containing
paint and yielded failing results. Upon
learning this information, Schylling
submitted reports to CPSC under Section
15(b) with respect to the subject Tops and
Pails, as further discussed in paragraph 24
below. On August 22, 2007, the Commission
and Schylling announced a recall of about
66,000 Tops and about 4,700 Pails because
‘‘Surface paints on the wooden handles of the
tops and pails contain excessive levels of
lead, which violates the federal lead paint
standard. Lead is toxic if ingested by young
children and can cause adverse health
effects.’’
13. On September 28, 2007, a
representative of one of Schylling’s licensors,
the Walt Disney Company, informed
Schylling that at Disney’s behest a sample of
the Winnie-the-Pooh style spinning top toys
had been tested by an independent
laboratory, which determined that the top’s
wooden handle bore red paint whose lead
content exceeded the permissible limit of
0.06 percent set forth in the Lead-Paint Ban.
Until that time Schylling reportedly was
unaware that it had sold any Winnie-thePooh tops with wooden handles, as it
supposedly had ordered the Winnie-the-Pooh
tops from Sanda Kan with unpainted plastic
rather than wooden handles, and the noncompliant tops reportedly had not been
detected during Schylling’s normal quality
control review of incoming shipments. Even
though it had sold this toy only in 2003,
Schylling was able to locate in storage a pair
of the Winnie-the-Pooh tops that it believed
to be from the same shipment as the sample
tested by Disney, and the items were sent to
an independent laboratory for confirmatory
testing.
E:\FR\FM\02JNN1.SGM
02JNN1
30786
Federal Register / Vol. 75, No. 105 / Wednesday, June 2, 2010 / Notices
sroberts on DSKD5P82C1PROD with NOTICES
14. On October 22, 2007, as a result of
testing conducted in Hong Kong at its behest,
Schylling obtained a test report from an
independent laboratory demonstrating that
the wooden handles of both samples of the
Winnie-the-Pooh tops bore red paint whose
lead content exceeded the permissible limit
of 0.06 percent set forth in the Lead-Paint
Ban. Schylling promptly submitted a report
to CPSC under Section 15(b) with respect to
the Winnie-the-Pooh tops, and on November
7, 2007, the Commission and Schylling
announced an expansion of the original
recall of Tops and Pails to include about
3,600 of these tops because ‘‘Surface paint on
the wooden handle of the top contains
excessive levels of lead, violating the federal
lead paint standard.’’
15. Although Schylling reported no
incidents or injuries associated with the
presence of excessive lead in the paint or
other surface coatings of the Subject
Products, it failed to take adequate action to
ensure that none would bear or contain leadcontaining paint. That created a risk of lead
poisoning and adverse health effects to
children.
16. The Subject Products constitute
‘‘banned hazardous products’’ under CPSA
section 8 and the Lead-Paint Ban, 15 U.S.C.
2057 and 16 CFR 1303.1(a)(1), 1303.4(b), in
that they bear or contain paint or other
surface coating materials whose lead content
exceeds the permissible limit of 0.06 percent
of the weight of the total nonvolatile content
of the paint or the weight of the dried paint
film.
17. Between June 2001 and November
2003, Schylling sold, manufactured for sale,
offered for sale, distributed in commerce, or
imported into the United States, or caused
one or more of such acts, with respect to the
Subject Products, in violation of section
19(a)(1) of the CPSA, 15 U.S.C. 2068(a)(1).
Schylling committed these prohibited acts
‘‘knowingly,’’ as that term is defined in
section 20(d) of the CPSA, 15 U.S.C. 2069(d).
18. Pursuant to section 20 of the CPSA, 15
U.S.C. 2069, Schylling is subject to civil
penalties for the violations described in
paragraph 17.
B. Failure To Report
19. Upon receiving the March 7, 2002
failing test results on certain samples of the
tin pail toys, Schylling reportedly halted
shipments immediately and locked-down its
relevant inventory to prevent any further
shipments of all three styles of the Pails, and
contacted Eway to investigate the matter.
Although it reportedly never obtained any
failing lead test reports for them, Schylling
included the Thomas and Friends and
Curious George styles of Pails because it had
reason to suspect they were also noncompliant as they had come from the same
manufacturer, been part of the same
shipments, and had similar red and yellow
painted wooden handles. Schylling and
Eway determined the scope of product units
affected by this non-compliance issue
encompassed shipments from Hong Kong to
the United States initiated on January 24,
2002 and February 28, 2002, relating to a
single Schylling purchase order from early
December 2001. Schylling further determined
VerDate Mar<15>2010
19:08 Jun 01, 2010
Jkt 220001
that out of the nearly 10,200 imported Pails
affected by this issue, only about 4,700 units
had been shipped to its U.S. customers, the
shipments occurred in February and March
2002, and that hundreds of its customers had
received some quantity of these units.
20. At the conclusion of its investigation of
this matter, beginning on March 26, 2002,
Schylling reportedly notified every customer,
by telephone and mail, that they should
return the Pails in their possession. However,
Schylling did not inform the Commission of
the non-compliance or other related
information that could have allowed the
CPSC staff to assess the attendant risks and
any need for corrective action. While this
unilateral recall of the Pails reportedly
succeeded in recovering approximately 84%
(or 3,948) of the shipped units, the rest of the
Pails were not recovered by Schylling at the
time and for at least 5 years thereafter.
21. Upon receiving the June 30 and July 1,
2002 failing test results on certain samples of
the spinning top toys, Schylling reportedly
contacted Sanda Kan immediately to inform
the factory that it was rejecting these tops
because they could not be sold in the United
States, and to investigate the matter. In
response to Schylling’s inquiries about the
status of its then-existing inventory of Tops
and these failing test results, Sanda Kan
reportedly explained that it had recently
changed paint suppliers and suspected that
the new supplier had been the source of the
lead-containing paint. Sanda Kan assured
Schylling that these failed samples were from
a new production run involving this new
supplier, indicating that the scope of
spinning top toys affected by this noncompliance issue included the most recent
Schylling purchase order, which had not yet
been imported into the United States.
Schylling also had in its possession at the
time two earlier passing test results that it
believed to be pertinent: A November 1997
test report showed that various paint colors
from several Thomas and Friends style top
samples complied with the Lead-Paint Ban’s
regulatory limit for total lead content; and a
January 2000 test report showed that various
paints used on the same style tops likewise
complied.
22. Even though it had recently
encountered a similar non-compliance issue
involving the Pails and Eway, Schylling
reportedly concluded that it had resolved the
lead-containing paint problem regarding the
Tops before any non-compliant units of these
toys were imported into the United States.
This conclusion was reportedly based on
Sanda Kan’s assurances, Schylling’s longstanding business relationship with and
perception of that supplier as a reliable
source in the industry, the passing test
results from 1997 and 2000, and its
instructions to Sanda Kan to switch to plastic
handles. Schylling did not conduct testing
for the presence of lead on any Tops (with
wooden handles) in its warehouse at the
time, and continued to ship them to its U.S.
customers for several more months until at
least September 2002.
23. As previously described in paragraph
12, Schylling was contacted on August 7,
2007, by a Chicago Tribune news reporter
who informed the company that a sample of
PO 00000
Frm 00017
Fmt 4703
Sfmt 4703
the Thomas and Friends style Top had been
purchased from a U.S. consumer via an
Internet auction Web site in relation to an
upcoming news story, and had subsequently
failed independent lab testing for the
presence of lead-containing paint.
Specifically, Schylling learned that the
University of Iowa Hygienic Laboratory had
tested the sample twice, and results
demonstrated that the Top’s wooden handle
bore red paint with a lead content of 2.4
percent. Schylling reportedly was surprised
to learn this information, and upon further
investigation received from Sanda Kan a
passing test result obtained in 2001 that
showed six bottles of wet paint, intended for
use on the spinning top toys, had passed
testing for compliance with the European
Standard on Safety of Toys (EN71) limits for
soluble lead (albeit not total lead) content.
After reviewing the situation, Schylling
determined that the Thomas and Friends
style Top in question had been purchased
from Sanda Kan prior to July 2002, when
Schylling instructed that the handles be
changed to plastic.
24. On August 9, 2007, Schylling filed a
Section 15(b) report with the CPSC
concerning the subject Tops. The next day,
on August 10, 2007, reportedly ‘‘out of an
abundance of caution,’’ Schylling filed a
Section 15(b) report with the CPSC
concerning the subject Pails.
25. By dates well before August 2007,
Schylling knew or should have known that
at least a proportion of the subject Tops and
Pails distributed in commerce did not
comply with the Lead-Paint Ban, in that they
bear or contain paint or other surface coating
materials whose lead content exceeds the
permissible limit of 0.06 percent of the
weight of the total nonvolatile content of the
paint or the weight of the dried paint film.
Accordingly, Schylling had obtained
information that reasonably supported the
conclusion that the subject Tops and Pails
failed to comply with an applicable
consumer product safety rule. CPSA section
15(b)(1), 15 U.S.C. 2064(b)(1), required
Schylling to immediately inform the
Commission of each of these failures to
comply.
26. Schylling’s failure to furnish
information to CPSC as required by CPSA
section 15(b)(1), 15 U.S.C. 2064(b)(1),
violated section 19(a)(4) of the CPSA, 15
U.S.C. 2068(a)(4), with respect to these toys.
Schylling committed these prohibited acts
‘‘knowingly,’’ as that term is defined in
section 20(d) of the CPSA, 15 U.S.C. 2069(d).
27. Pursuant to section 20 of the CPSA, 15
U.S.C. § 2069, Schylling is subject to civil
penalties for the violations described in
paragraph 26.
Responsive Allegations of Schylling
28. Schylling denies that it violated
Sections 15(b)(1), 19(a)(1) or 19(a)(4) of the
CPSA, 15 U.S.C. 2064(b)(1), 2068(a)(1), or
2068(a)(4), and further denies that it did so
‘‘knowingly’’ (as defined in section 20(d) of
the CPSA, 15 U.S.C. 2069(d)). Schylling
further denies the factual or legal conclusions
or characterizations in the Staff Allegations,
in paragraphs 4–27, including that Schylling
had any knowledge prior to August 2007 that
E:\FR\FM\02JNN1.SGM
02JNN1
Federal Register / Vol. 75, No. 105 / Wednesday, June 2, 2010 / Notices
sroberts on DSKD5P82C1PROD with NOTICES
it had imported or sold any spinning tops
that did not comply with the lead paint
standard.
29. Schylling never intentionally or
knowingly imported, sold or offered for sale
any products that did not comply with the
lead paint standard or other legal
requirement. At all times relevant to this
matter, Schylling’s actions were reasonable,
were based on its good faith understanding
of the operative facts and fully satisfied any
and all standards of care.
30. Schylling has entered into the
Agreement for settlement purposes only, to
avoid incurring additional expenses and the
distraction of litigation. Accordingly, the
Agreement and Order do not constitute, and
are not evidence of, any fault or wrongdoing
on the part of Schylling.
Agreement of the Parties
31. Under the CPSA, the Commission has
jurisdiction over this matter and over
Schylling.
32. The parties enter into the Agreement
for settlement purposes only. The Agreement
does not constitute an admission by
Schylling, or a determination by the
Commission, that Schylling knowingly
violated the CPSA.
33. In settlement of the Staff’s allegations,
Schylling shall pay a civil penalty in the total
amount of Four Hundred Thousand
($400,000.00) dollars. The civil penalty shall
be paid in four (4) installments as follows:
$75,000.00 shall be paid within twenty (20)
calendar days of service of the Commission’s
final Order accepting the Agreement;
$75,000.00 shall be paid on or before the oneyear anniversary of the Commission’s final
Order accepting the Agreement; $125,000.00
shall be paid on or before the two-year
anniversary of service of the Commission’s
final Order accepting the Agreement; and
$125,000.00 shall be paid on or before the
three-year anniversary of service of the
Commission’s final Order accepting the
Agreement. Each payment shall be made by
check payable to the order of the United
States Treasury.
34. Upon the Commission’s provisional
acceptance of the Agreement, the Agreement
shall be placed on the public record and
published in the Federal Register in
accordance with the procedures set forth in
16 CFR 1118.20(e). In accordance with 16
CFR 1118.20(f), if the Commission does not
receive any written request not to accept the
Agreement within fifteen (15) days, the
Agreement shall be deemed finally accepted
on the sixteenth (16th) day after the date it
is published in the Federal Register.
35. Upon the Commission’s final
acceptance of the Agreement and issuance of
the final Order, Schylling knowingly,
voluntarily, and completely waives any
rights it may have in this matter to the
following: (1) An administrative or judicial
hearing; (2) judicial review or other challenge
or contest of the validity of the Commission’s
Order or actions; (3) a determination by the
Commission of whether Schylling failed to
comply with the CPSA and its underlying
regulations; (4) a statement of findings of fact
VerDate Mar<15>2010
19:08 Jun 01, 2010
Jkt 220001
and conclusions of law; and (5) any claims
under the Equal Access to Justice Act.
36. The Commission may publish the terms
of the Agreement and Order.
37. The Agreement and Order shall apply
to, and be binding upon, Schylling and each
of its successors and assigns.
38. The Commission issues the Order
under the provisions of the CPSA, and
violation of the Order may subject those
referenced in paragraph 37 to appropriate
legal action.
39. The Agreement may be used in
interpreting the Order. Understandings,
agreements, representations, or
interpretations apart from those contained in
the Agreement and Order may not be used to
vary or contradict its terms. The Agreement
shall not be waived, amended, modified, or
otherwise altered, except in a writing that is
executed by the party against whom such
waiver, amendment, modification, or
alteration is sought to be enforced.
40. If any provision of the Agreement and
Order is held to be illegal, invalid, or
unenforceable under present or future laws
effective during the terms of the Agreement
and Order, such provision shall be fully
severable. The balance of the Agreement and
Order shall remain in full force and effect,
unless the Commission and Schylling agree
that severing the provision materially affects
the purpose of the Agreement and Order.
Schylling Associates, Inc.
Dated: May 17, 2010.
Jack Schylling,
President, Schylling Associates, Inc.
Dated: May 18, 2010.
Victor E. Schwartz,
Cary Silverman,
Shook, Hardy & Bacon, LLP, 1155 F Street,
NW., Suite 200, Washington, DC 20004–
1305. Counsel for Schylling Associates, Inc.
U.S. Consumer Product Safety Commission
Staff.
Cheryl A. Falvey,
General Counsel, Office of the General
Counsel.
Dated: May 18, 2010.
Melissa V. Hampshire,
Assistant General Counsel,
Alex Dennis,
Attorney, Division of Enforcement and
Information, Office of the General Counsel.
United States of America
Consumer Product Safety Commission
CPSC Docket No. 10–C0004
In the Matter of Schylling Associates, Inc.;
Order
Upon consideration of the Settlement
Agreement entered into between Schylling
Associates, Inc. (‘‘Schylling’’), and the U.S.
Consumer Product Safety Commission
(‘‘Commission’’) staff, and the Commission
having jurisdiction over the subject matter
and over Schylling, and it appearing that the
Settlement Agreement and Order are in the
public interest, it is ordered, that the
Settlement Agreement be, and hereby is,
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
30787
accepted; and it is further ordered, that
Schylling shall pay a civil penalty in the total
amount of Four Hundred Thousand
($400,000.00) dollars. The civil penalty shall
be paid in four (4) installments as follows:
$75,000.00 shall be paid within twenty (20)
calendar days of service of the Commission’s
final Order accepting the Agreement;
$75,000.00 shall be paid on or before the oneyear anniversary of service of the
Commission’s final Order accepting the
Agreement; $125,000.00 shall be paid on or
before the two-year anniversary of service of
the Commission’s final Order accepting the
Agreement; and $125,000.00 shall be paid on
or before the three-year anniversary of service
of the Commission’s final Order accepting
the Agreement. Each payment shall be made
by check payable to the order of the United
States Treasury. Upon the failure of Schylling
to make any of the foregoing payments when
due, (i) the entire amount of the civil penalty
shall become due and payable, and (ii)
interest on the outstanding balance shall
accrue and be paid by Schylling at the
Federal legal rate of interest set forth at 28
U.S.C. 1961(a) and (b).
Provisionally accepted and provisional
Order issued on the 26th day of May, 2010.
By Order of the Commission.
Todd A. Stevenson,
Secretary, U.S. Consumer Product Safety
Commission.
[FR Doc. 2010–13088 Filed 6–1–10; 8:45 am]
BILLING CODE 6355–01–P
DEPARTMENT OF DEFENSE
Office of the Secretary
[Transmittal No. 10–06]
36(b)(1) Arms Sales Notification
AGENCY: Defense Security Cooperation
Agency, DoD.
ACTION: Notice.
SUMMARY: The Department of Defense is
publishing the unclassified text of a
section 36(b)(1) arms sales notification
to fulfill the requirements of section 155
of Public Law 104–164 dated 21 July
1996.
FOR FURTHER INFORMATION CONTACT: Ms.
B. English, DSCA/DBO/CFM, (703) 601–
3740.
The following is a copy of a letter to
the Speaker of the House of
Representatives, Transmittal 10–06 with
attached transmittal, policy justification,
and Sensitivity of Technology.
Dated: May 26, 2010.
Mitchell S. Bryman,
Alternate OSD Federal Register Liaison
Officer, Department of Defense.
BILLING CODE 5001-06-P
E:\FR\FM\02JNN1.SGM
02JNN1
Agencies
[Federal Register Volume 75, Number 105 (Wednesday, June 2, 2010)]
[Notices]
[Pages 30784-30787]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-13088]
-----------------------------------------------------------------------
CONSUMER PRODUCT SAFETY COMMISSION
[CPSC Docket No. 10-C0004]
Schylling Associates, Inc., Provisional Acceptance of a
Settlement Agreement and Order
AGENCY: Consumer Product Safety Commission.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: It is the policy of the Commission to publish settlements
which it provisionally accepts under the Consumer Product Safety Act in
the Federal Register in accordance with the terms of 16 CFR 1118.20(e).
Published below is a provisionally-accepted Settlement Agreement with
Schylling Associates, Inc., containing a civil penalty of $400,000.00.
DATES: Any interested person may ask the Commission not to accept this
agreement or otherwise comment on its contents by filing a written
request with the Office of the Secretary by June 17, 2010.
ADDRESSES: Persons wishing to comment on this Settlement Agreement
should send written comments to the Comment 10-C0004, Office of the
Secretary, Consumer Product Safety
[[Page 30785]]
Commission, 4330 East West Highway, Room 820, Bethesda, Maryland 20814-
4408.
FOR FURTHER INFORMATION CONTACT: Alex Dennis, Attorney, Division of
Enforcement and Information, Office of the General Counsel, Consumer
Product Safety Commission, 4330 East West Highway, Bethesda, Maryland
20814-4408; telephone (301) 504-7817.
SUPPLEMENTARY INFORMATION: The text of the Agreement and Order appears
below.
Dated: May 26, 2010.
Todd A. Stevenson,
Secretary.
United States of America
Consumer Product Safety Commission
CPSC Docket No. 10-C0004
In the Matter of Schylling Associates, Inc.; Settlement Agreement
1. In accordance with 16 CFR 1118.20, Schylling Associates, Inc.
(``Schylling'') and the staff (``Staff'') of the United States
Consumer Product Safety Commission (``CPSC'' or the ``Commission'')
enter into this Settlement Agreement (``Agreement''). The Agreement
and the incorporated attached Order (``Order'') settle the Staff's
allegations set forth below.
Parties
2. The Commission is an independent Federal regulatory agency
established pursuant to, and responsible for the enforcement of, the
Consumer Product Safety Act, 15 U.S.C. 2051-2089 (``CPSA'').
3. Schylling is a corporation organized and existing under the
laws of the Commonwealth of Massachusetts, with principal offices
located in Rowley, Massachusetts. At all times relevant hereto,
Schylling designed, imported and sold toys and children's products.
Staff Allegations
A. Introduction/Distribution in Commerce of Banned Toys
4. From January 24, 2002 through March 2002, Schylling imported
approximately 10,200 units of certain tin pail toys (``Pails''),
consisting of Thomas and Friends, Curious George, and Primary Colors
(red/yellow) styles, which had been produced in China by one of its
Hong Kong manufacturers, Eway Enterprises, Ltd. (``Eway'').
Schylling distributed approximately 4,700 units of the Pails to its
customers in February and March 2002. The Pails were sold or offered
for sale to consumers at toy stores and gift shops nationwide in
February and March 2002, for about $6 per unit.
5. Between June 2001 and June 2002, Schylling imported
approximately 66,000 units of certain spinning top toys (``Tops''),
consisting of Thomas and Friends, Curious George, and Circus styles,
which had been produced in China by another of its Hong Kong
manufacturers, Sanda Kan Industrial, Ltd. (``Sanda Kan''). Schylling
distributed these Tops to its U.S. customers from July 2001 until at
least September 2002. The Tops were sold or offered for sale to
consumers at toy stores and gift shops nationwide from July 2001
until at least September 2002, for about $13 per unit.
6. Between April 2003 and May 2003, Schylling imported
approximately 3,600 units of certain Winnie-the-Pooh style spinning
top toys, which also had been produced in China by Sanda Kan.
Schylling distributed these Winnie-the-Pooh tops to its U.S.
customers from April until November 2003. The Winnie-the-Pooh tops
were sold or offered for sale to consumers at toy stores and gift
shops nationwide from April until November 2003, for about $12 per
unit.
7. The Pails, Tops and Winnie-the-Pooh tops described in
paragraphs 4 through 6 above (collectively, the ``Subject
Products'') are ``consumer product(s),'' and, at all times relevant
hereto, Schylling was a ``manufacturer'' of those consumer products,
which were ``distributed in commerce,'' as those terms are defined
in CPSA sections 3(a)(3), (5), (8), and (11), 15 U.S.C. 2052(a)(3),
(5), (8), and (11).
8. The Subject Products are articles intended to be entrusted to
or for use by children, and, therefore, are subject to the
requirements of the Commission's Ban of Lead-Containing Paint and
Certain Consumer Products Bearing Lead-Containing Paint, 16 CFR Part
1303 (the ``Lead-Paint Ban''). Under the Lead-Paint Ban, toys and
other children's articles must not bear ``lead-containing paint,''
defined as paint or other surface coating materials whose lead
content is more than 0.06 percent of the weight of the total
nonvolatile content of the paint or the weight of the dried paint
film. 16 CFR 1303.2(b)(1) \1\
---------------------------------------------------------------------------
\1\ At the time of the alleged violations stated in this
Settlement Agreement, the permissible limit of 0.06 percent was in
effect for the Lead-Paint Ban. As of August 14, 2009, the limit was
amended to 0.009 percent pursuant to 15 U.S.C. 1278a(f)(1).
---------------------------------------------------------------------------
9. On March 7, 2002, as a result of testing conducted in Hong
Kong at its behest, Schylling obtained a test report from an
independent laboratory demonstrating that the wooden handles of as
many as 12 production samples of the Primary Colors (red/yellow)
style tin pail toys bore paint or other surface coating materials
whose lead content exceeded the permissible limit of 0.06 percent
set forth in the Lead-Paint Ban. In late March 2002, without
furnishing any copy of the associated test report, Eway informed
Schylling that the supplier of the yellow and red paints used on the
Pails had conducted re-testing and confirmed that the paints failed
to comply with the Lead-Paint Ban.
10. Shortly after March 2002, following a brief evaluation of
possibly purchasing additional pails from Eway having a clear
(lacquer) finish instead of paint, Schylling reportedly severed its
business relationship with Eway due to the referenced lead paint
test failures. Beginning March 26, 2002, Schylling, without
informing CPSC, initiated a unilateral recall of the Pails from its
customers, as further discussed in paragraphs 19 and 20 below.
11. On June 30 and July 1, 2002, as a result of testing
conducted in Hong Kong at its behest, Schylling obtained three test
reports from an independent laboratory demonstrating that the wooden
handles of production samples from each of the Thomas and Friends,
Curious George, and Circus style spinning top toys respectively,
representing altogether as many as 9 samples, bore paint or other
surface coating materials whose lead content exceeded the
permissible limit of 0.06 percent set forth in the Lead-Paint Ban.
On July 15, 2002, as a result of re-testing conducted in Hong Kong
at its behest, Schylling obtained an additional three failing test
reports from an independent laboratory that confirmed the June 30th
and July 1st results with respect to another set of production
samples from each of these three styles of spinning top toys. For
the reasons further discussed in paragraphs 21 and 22 below,
however, Schylling reportedly concluded at the time that it had
resolved the lead-containing paint problem before any non-compliant
Tops were imported into the United States. In order to avoid any
lead-in-paint problems in the future, Schylling then instructed its
manufacturer, Sanda Kan, that henceforth all spinning top toys had
to be made with unpainted plastic rather than wooden handles, and
had to pass applicable testing for the presence of lead.
12. Some five years later, in early August 2007, a Chicago
Tribune news reporter contacted Schylling and informed it that a
sample of the Thomas and Friends style Top, purchased from a U.S.
consumer via a Web site, had been tested by an independent
laboratory for the presence of lead-containing paint and yielded
failing results. Upon learning this information, Schylling submitted
reports to CPSC under Section 15(b) with respect to the subject Tops
and Pails, as further discussed in paragraph 24 below. On August 22,
2007, the Commission and Schylling announced a recall of about
66,000 Tops and about 4,700 Pails because ``Surface paints on the
wooden handles of the tops and pails contain excessive levels of
lead, which violates the federal lead paint standard. Lead is toxic
if ingested by young children and can cause adverse health
effects.''
13. On September 28, 2007, a representative of one of
Schylling's licensors, the Walt Disney Company, informed Schylling
that at Disney's behest a sample of the Winnie-the-Pooh style
spinning top toys had been tested by an independent laboratory,
which determined that the top's wooden handle bore red paint whose
lead content exceeded the permissible limit of 0.06 percent set
forth in the Lead-Paint Ban. Until that time Schylling reportedly
was unaware that it had sold any Winnie-the-Pooh tops with wooden
handles, as it supposedly had ordered the Winnie-the-Pooh tops from
Sanda Kan with unpainted plastic rather than wooden handles, and the
non-compliant tops reportedly had not been detected during
Schylling's normal quality control review of incoming shipments.
Even though it had sold this toy only in 2003, Schylling was able to
locate in storage a pair of the Winnie-the-Pooh tops that it
believed to be from the same shipment as the sample tested by
Disney, and the items were sent to an independent laboratory for
confirmatory testing.
[[Page 30786]]
14. On October 22, 2007, as a result of testing conducted in
Hong Kong at its behest, Schylling obtained a test report from an
independent laboratory demonstrating that the wooden handles of both
samples of the Winnie-the-Pooh tops bore red paint whose lead
content exceeded the permissible limit of 0.06 percent set forth in
the Lead-Paint Ban. Schylling promptly submitted a report to CPSC
under Section 15(b) with respect to the Winnie-the-Pooh tops, and on
November 7, 2007, the Commission and Schylling announced an
expansion of the original recall of Tops and Pails to include about
3,600 of these tops because ``Surface paint on the wooden handle of
the top contains excessive levels of lead, violating the federal
lead paint standard.''
15. Although Schylling reported no incidents or injuries
associated with the presence of excessive lead in the paint or other
surface coatings of the Subject Products, it failed to take adequate
action to ensure that none would bear or contain lead-containing
paint. That created a risk of lead poisoning and adverse health
effects to children.
16. The Subject Products constitute ``banned hazardous
products'' under CPSA section 8 and the Lead-Paint Ban, 15 U.S.C.
2057 and 16 CFR 1303.1(a)(1), 1303.4(b), in that they bear or
contain paint or other surface coating materials whose lead content
exceeds the permissible limit of 0.06 percent of the weight of the
total nonvolatile content of the paint or the weight of the dried
paint film.
17. Between June 2001 and November 2003, Schylling sold,
manufactured for sale, offered for sale, distributed in commerce, or
imported into the United States, or caused one or more of such acts,
with respect to the Subject Products, in violation of section
19(a)(1) of the CPSA, 15 U.S.C. 2068(a)(1). Schylling committed
these prohibited acts ``knowingly,'' as that term is defined in
section 20(d) of the CPSA, 15 U.S.C. 2069(d).
18. Pursuant to section 20 of the CPSA, 15 U.S.C. 2069,
Schylling is subject to civil penalties for the violations described
in paragraph 17.
B. Failure To Report
19. Upon receiving the March 7, 2002 failing test results on
certain samples of the tin pail toys, Schylling reportedly halted
shipments immediately and locked-down its relevant inventory to
prevent any further shipments of all three styles of the Pails, and
contacted Eway to investigate the matter. Although it reportedly
never obtained any failing lead test reports for them, Schylling
included the Thomas and Friends and Curious George styles of Pails
because it had reason to suspect they were also non-compliant as
they had come from the same manufacturer, been part of the same
shipments, and had similar red and yellow painted wooden handles.
Schylling and Eway determined the scope of product units affected by
this non-compliance issue encompassed shipments from Hong Kong to
the United States initiated on January 24, 2002 and February 28,
2002, relating to a single Schylling purchase order from early
December 2001. Schylling further determined that out of the nearly
10,200 imported Pails affected by this issue, only about 4,700 units
had been shipped to its U.S. customers, the shipments occurred in
February and March 2002, and that hundreds of its customers had
received some quantity of these units.
20. At the conclusion of its investigation of this matter,
beginning on March 26, 2002, Schylling reportedly notified every
customer, by telephone and mail, that they should return the Pails
in their possession. However, Schylling did not inform the
Commission of the non-compliance or other related information that
could have allowed the CPSC staff to assess the attendant risks and
any need for corrective action. While this unilateral recall of the
Pails reportedly succeeded in recovering approximately 84% (or
3,948) of the shipped units, the rest of the Pails were not
recovered by Schylling at the time and for at least 5 years
thereafter.
21. Upon receiving the June 30 and July 1, 2002 failing test
results on certain samples of the spinning top toys, Schylling
reportedly contacted Sanda Kan immediately to inform the factory
that it was rejecting these tops because they could not be sold in
the United States, and to investigate the matter. In response to
Schylling's inquiries about the status of its then-existing
inventory of Tops and these failing test results, Sanda Kan
reportedly explained that it had recently changed paint suppliers
and suspected that the new supplier had been the source of the lead-
containing paint. Sanda Kan assured Schylling that these failed
samples were from a new production run involving this new supplier,
indicating that the scope of spinning top toys affected by this non-
compliance issue included the most recent Schylling purchase order,
which had not yet been imported into the United States. Schylling
also had in its possession at the time two earlier passing test
results that it believed to be pertinent: A November 1997 test
report showed that various paint colors from several Thomas and
Friends style top samples complied with the Lead-Paint Ban's
regulatory limit for total lead content; and a January 2000 test
report showed that various paints used on the same style tops
likewise complied.
22. Even though it had recently encountered a similar non-
compliance issue involving the Pails and Eway, Schylling reportedly
concluded that it had resolved the lead-containing paint problem
regarding the Tops before any non-compliant units of these toys were
imported into the United States. This conclusion was reportedly
based on Sanda Kan's assurances, Schylling's long-standing business
relationship with and perception of that supplier as a reliable
source in the industry, the passing test results from 1997 and 2000,
and its instructions to Sanda Kan to switch to plastic handles.
Schylling did not conduct testing for the presence of lead on any
Tops (with wooden handles) in its warehouse at the time, and
continued to ship them to its U.S. customers for several more months
until at least September 2002.
23. As previously described in paragraph 12, Schylling was
contacted on August 7, 2007, by a Chicago Tribune news reporter who
informed the company that a sample of the Thomas and Friends style
Top had been purchased from a U.S. consumer via an Internet auction
Web site in relation to an upcoming news story, and had subsequently
failed independent lab testing for the presence of lead-containing
paint. Specifically, Schylling learned that the University of Iowa
Hygienic Laboratory had tested the sample twice, and results
demonstrated that the Top's wooden handle bore red paint with a lead
content of 2.4 percent. Schylling reportedly was surprised to learn
this information, and upon further investigation received from Sanda
Kan a passing test result obtained in 2001 that showed six bottles
of wet paint, intended for use on the spinning top toys, had passed
testing for compliance with the European Standard on Safety of Toys
(EN71) limits for soluble lead (albeit not total lead) content.
After reviewing the situation, Schylling determined that the Thomas
and Friends style Top in question had been purchased from Sanda Kan
prior to July 2002, when Schylling instructed that the handles be
changed to plastic.
24. On August 9, 2007, Schylling filed a Section 15(b) report
with the CPSC concerning the subject Tops. The next day, on August
10, 2007, reportedly ``out of an abundance of caution,'' Schylling
filed a Section 15(b) report with the CPSC concerning the subject
Pails.
25. By dates well before August 2007, Schylling knew or should
have known that at least a proportion of the subject Tops and Pails
distributed in commerce did not comply with the Lead-Paint Ban, in
that they bear or contain paint or other surface coating materials
whose lead content exceeds the permissible limit of 0.06 percent of
the weight of the total nonvolatile content of the paint or the
weight of the dried paint film. Accordingly, Schylling had obtained
information that reasonably supported the conclusion that the
subject Tops and Pails failed to comply with an applicable consumer
product safety rule. CPSA section 15(b)(1), 15 U.S.C. 2064(b)(1),
required Schylling to immediately inform the Commission of each of
these failures to comply.
26. Schylling's failure to furnish information to CPSC as
required by CPSA section 15(b)(1), 15 U.S.C. 2064(b)(1), violated
section 19(a)(4) of the CPSA, 15 U.S.C. 2068(a)(4), with respect to
these toys. Schylling committed these prohibited acts ``knowingly,''
as that term is defined in section 20(d) of the CPSA, 15 U.S.C.
2069(d).
27. Pursuant to section 20 of the CPSA, 15 U.S.C. Sec. 2069,
Schylling is subject to civil penalties for the violations described
in paragraph 26.
Responsive Allegations of Schylling
28. Schylling denies that it violated Sections 15(b)(1),
19(a)(1) or 19(a)(4) of the CPSA, 15 U.S.C. 2064(b)(1), 2068(a)(1),
or 2068(a)(4), and further denies that it did so ``knowingly'' (as
defined in section 20(d) of the CPSA, 15 U.S.C. 2069(d)). Schylling
further denies the factual or legal conclusions or characterizations
in the Staff Allegations, in paragraphs 4-27, including that
Schylling had any knowledge prior to August 2007 that
[[Page 30787]]
it had imported or sold any spinning tops that did not comply with
the lead paint standard.
29. Schylling never intentionally or knowingly imported, sold or
offered for sale any products that did not comply with the lead
paint standard or other legal requirement. At all times relevant to
this matter, Schylling's actions were reasonable, were based on its
good faith understanding of the operative facts and fully satisfied
any and all standards of care.
30. Schylling has entered into the Agreement for settlement
purposes only, to avoid incurring additional expenses and the
distraction of litigation. Accordingly, the Agreement and Order do
not constitute, and are not evidence of, any fault or wrongdoing on
the part of Schylling.
Agreement of the Parties
31. Under the CPSA, the Commission has jurisdiction over this
matter and over Schylling.
32. The parties enter into the Agreement for settlement purposes
only. The Agreement does not constitute an admission by Schylling,
or a determination by the Commission, that Schylling knowingly
violated the CPSA.
33. In settlement of the Staff's allegations, Schylling shall
pay a civil penalty in the total amount of Four Hundred Thousand
($400,000.00) dollars. The civil penalty shall be paid in four (4)
installments as follows: $75,000.00 shall be paid within twenty (20)
calendar days of service of the Commission's final Order accepting
the Agreement; $75,000.00 shall be paid on or before the one-year
anniversary of the Commission's final Order accepting the Agreement;
$125,000.00 shall be paid on or before the two-year anniversary of
service of the Commission's final Order accepting the Agreement; and
$125,000.00 shall be paid on or before the three-year anniversary of
service of the Commission's final Order accepting the Agreement.
Each payment shall be made by check payable to the order of the
United States Treasury.
34. Upon the Commission's provisional acceptance of the
Agreement, the Agreement shall be placed on the public record and
published in the Federal Register in accordance with the procedures
set forth in 16 CFR 1118.20(e). In accordance with 16 CFR
1118.20(f), if the Commission does not receive any written request
not to accept the Agreement within fifteen (15) days, the Agreement
shall be deemed finally accepted on the sixteenth (16th) day after
the date it is published in the Federal Register.
35. Upon the Commission's final acceptance of the Agreement and
issuance of the final Order, Schylling knowingly, voluntarily, and
completely waives any rights it may have in this matter to the
following: (1) An administrative or judicial hearing; (2) judicial
review or other challenge or contest of the validity of the
Commission's Order or actions; (3) a determination by the Commission
of whether Schylling failed to comply with the CPSA and its
underlying regulations; (4) a statement of findings of fact and
conclusions of law; and (5) any claims under the Equal Access to
Justice Act.
36. The Commission may publish the terms of the Agreement and
Order.
37. The Agreement and Order shall apply to, and be binding upon,
Schylling and each of its successors and assigns.
38. The Commission issues the Order under the provisions of the
CPSA, and violation of the Order may subject those referenced in
paragraph 37 to appropriate legal action.
39. The Agreement may be used in interpreting the Order.
Understandings, agreements, representations, or interpretations
apart from those contained in the Agreement and Order may not be
used to vary or contradict its terms. The Agreement shall not be
waived, amended, modified, or otherwise altered, except in a writing
that is executed by the party against whom such waiver, amendment,
modification, or alteration is sought to be enforced.
40. If any provision of the Agreement and Order is held to be
illegal, invalid, or unenforceable under present or future laws
effective during the terms of the Agreement and Order, such
provision shall be fully severable. The balance of the Agreement and
Order shall remain in full force and effect, unless the Commission
and Schylling agree that severing the provision materially affects
the purpose of the Agreement and Order.
Schylling Associates, Inc.
Dated: May 17, 2010.
Jack Schylling,
President, Schylling Associates, Inc.
Dated: May 18, 2010.
Victor E. Schwartz,
Cary Silverman,
Shook, Hardy & Bacon, LLP, 1155 F Street, NW., Suite 200,
Washington, DC 20004-1305. Counsel for Schylling Associates, Inc.
U.S. Consumer Product Safety Commission Staff.
Cheryl A. Falvey,
General Counsel, Office of the General Counsel.
Dated: May 18, 2010.
Melissa V. Hampshire,
Assistant General Counsel,
Alex Dennis,
Attorney, Division of Enforcement and Information, Office of the
General Counsel.
United States of America
Consumer Product Safety Commission
CPSC Docket No. 10-C0004
In the Matter of Schylling Associates, Inc.; Order
Upon consideration of the Settlement Agreement entered into
between Schylling Associates, Inc. (``Schylling''), and the U.S.
Consumer Product Safety Commission (``Commission'') staff, and the
Commission having jurisdiction over the subject matter and over
Schylling, and it appearing that the Settlement Agreement and Order
are in the public interest, it is ordered, that the Settlement
Agreement be, and hereby is, accepted; and it is further ordered,
that Schylling shall pay a civil penalty in the total amount of Four
Hundred Thousand ($400,000.00) dollars. The civil penalty shall be
paid in four (4) installments as follows: $75,000.00 shall be paid
within twenty (20) calendar days of service of the Commission's
final Order accepting the Agreement; $75,000.00 shall be paid on or
before the one-year anniversary of service of the Commission's final
Order accepting the Agreement; $125,000.00 shall be paid on or
before the two-year anniversary of service of the Commission's final
Order accepting the Agreement; and $125,000.00 shall be paid on or
before the three-year anniversary of service of the Commission's
final Order accepting the Agreement. Each payment shall be made by
check payable to the order of the United States Treasury. Upon the
failure of Schylling to make any of the foregoing payments when due,
(i) the entire amount of the civil penalty shall become due and
payable, and (ii) interest on the outstanding balance shall accrue
and be paid by Schylling at the Federal legal rate of interest set
forth at 28 U.S.C. 1961(a) and (b).
Provisionally accepted and provisional Order issued on the 26th
day of May, 2010.
By Order of the Commission.
Todd A. Stevenson,
Secretary, U.S. Consumer Product Safety Commission.
[FR Doc. 2010-13088 Filed 6-1-10; 8:45 am]
BILLING CODE 6355-01-P