Expansion of Foreign-Trade Zone 272; Lehigh Valley, Pennsylvania, 29975-29976 [2010-12958]
Download as PDF
<![CDATA[
jlentini on DSKJ8SOYB1PROD with NOTICES
Federal Register / Vol. 75, No. 103 / Friday, May 28, 2010 / Notices
dehydration, plastic embedding and
thin-sectioning of biological materials.
Justification for Duty-Free Entry: No
instruments of same general category are
manufactured in the United States.
Application accepted by Commissioner
of Customs: April 30, 2010.
Docket Number: 10–012. Applicant:
California Institute of Technology, 1200
E. California Blvd., M/C 127–72,
Pasadena, CA 91125. Instrument:
Electron Microscope. Manufacturer: FEI
Company, Czech Republic. Intended
Use: The instrument will be used to
improve researchers’ understanding of
the structural dynamics of materials like
graphite, as well as ultrafast structural
changes over time in microscopy.
Techniques used with the instrument
include imaging, both in real space and
using diffraction. Imaging is done using
light as opposed to thermal heating or
field ionization. Justification for DutyFree Entry: There are no domestic
manufacturers of this type of electron
microscope. Application accepted by
Commissioner of Customs: May 5, 2010.
Docket Number: 10–013. Applicant:
Howard Hughes Medical Institute, 4000
Jones Bridge Road, Chevy Chase, MD
20815. Instrument: Electron Microscope.
Manufacturer: FEI Company, Czech
Republic. Intended Use: The instrument
will be used to examine portions of
vertebrate and invertebrate organisms
embedded in plastic resins and cut into
thin sections mounted on support grids
for examination. The objective is to
examine, at high resolution, the
ultrastructural organization of complex
biological structures to help elucidate
function. The instrument can be used
for 2D and 3D imaging of stained or
even unstained, low-contrast samples.
The instrument also allows for
observation and analyses of samples at
both room and liquid-nitrogen
temperature. Justification for Duty-Free
Entry: There are no domestic
manufacturers of this type of electron
microscope. Application accepted by
Commissioner of Customs: May 12,
2010.
Docket Number: 10–014. Applicant:
Howard Hughes Medical Institute, 4000
Jones Bridge Road, Chevy Chase, MD
20815. Instrument: Electron Microscope.
Manufacturer: FEI Company, Czech
Republic. Intended Use: The instrument
will be used to examine portions of
vertebrate and invertebrate organisms
embedded in plastic resins and cut into
thin sections mounted on support grids
for examination. The objective is to
examine, at high resolution, the
ultrastructural organization of complex
biological structures to help elucidate
function. The instrument can be used
for 2D and 3D imaging of stained or
VerDate Mar<15>2010
17:43 May 27, 2010
Jkt 220001
even unstained, low-contrast samples.
The instrument also allows for
observation and analyses of samples at
both room and liquid-nitrogen
temperature. Justification for Duty-Free
Entry: There are no domestic
manufacturers of this type of electron
microscope. Application accepted by
Commissioner of Customs: May 14,
2010.
Docket Number: 10–016. Applicant:
United States Geological Survey, 6th
Ave. & Kipling St., P.O. Box 25046,
MS973, Denver Federal Center, Building
20, Denver, CO 80225. Instrument:
Electron Microscope. Manufacturer: FEI
Company, Czech Republic. Intended
Use: The instrument will be used for the
microanalysis of rocks, minerals and
other particulate matter. Analyses of the
morphology, surface textures, grain
boundaries, and other properties of the
materials investigated include the use of
chemical composition and
crystallographic orientation and strain.
The low vacuum and low voltage
features of the instrument allows for the
viewing of hydrated and un-coated
samples with minimal sample
degradation or alteration. The advantage
of this instrument is that it can operate
at high vacuum and high acceleration
voltages as well as atmospheric
pressures and/or low accelerating
voltages while still maintaining high
resolution and high beam currents.
Justification for Duty-Free Entry: There
are no domestic manufacturers of this
type of electron microscope.
Application accepted by Commissioner
of Customs: May 18, 2010.
Docket Number: 10–017. Applicant:
University of Massachusetts Medical
School, Department of Cell Biology, Rm.
S7–210, 55 Lake Avenue North,
Worcester, MA 01655. Instrument:
Electron Microscope. Manufacturer: FEI
Company, Czech Republic. Intended
Use: The instrument will enable the
study of tissue cell structures at high
resolution, the recording of images on
the Eagle CCD camera, and the
observation of cryo-fixed specimens at
low temperatures. Justification for DutyFree Entry: There are no domestic
manufacturers of this type of electron
microscope. Application accepted by
Commissioner of Customs: May 12,
2010.
Docket Number: 10–018. Applicant:
Texas Tech University, Department of
Mechanical Engineering, 7th Street and
Boston Ave., Lubbock, TX 79409–1021.
Instrument: Electron Microscope.
Manufacturer: Japanese Electron-Optics,
Limited (JEOL), Japan. Intended Use:
The instrument will be used to probe
the crystalline structure of materials at
a magnification beyond that required to
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
29975
image dislocation behavior of fully
crystalline nanostructured metals. The
instrument will provide detailed surface
structures and faceting information.
Justification for Duty-Free Entry: No
instruments of same general category are
manufactured in the United States.
Application accepted by Commissioner
of Customs: May 17, 2010.
Docket Number: 10–020. Applicant:
Howard Hughes Medical Institute, 4000
Jones Bridge Road, Chevy Chase, MD
20815. Instrument: Electron Microscope.
Manufacturer: FEI Company, Czech
Republic. Intended Use: The instrument
will be used to examine portions of
vertebrate and invertebrate organisms
embedded in plastic resins and cut into
thin sections mounted on support grids
for examination. The objective is to
examine, at high resolution, the
ultrastructural organization of complex
biological structures to help elucidate
function. The instrument can be used
for 2D and 3D imaging of stained or
even unstained, low-contrast samples.
The instrument also allows for
observation and analyses of samples at
both room and liquid-nitrogen
temperature. Justification for Duty-Free
Entry: There are no domestic
manufacturers of this type of electron
microscope. Application accepted by
Commissioner of Customs: May 12,
2010.
Dated: May 24, 2010.
Christopher Cassel,
Director, IA Subsidies Enforcement Office.
[FR Doc. 2010–12962 Filed 5–27–10; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1679]
Expansion of Foreign-Trade Zone 272;
Lehigh Valley, Pennsylvania
Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as
amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the
following Order:
Whereas, the Lehigh Valley Economic
Development Corporation, grantee of
Foreign-Trade Zone 272, submitted an
application to the Board for authority to
expand FTZ 272 to include a site in
Bethlehem, Pennsylvania, adjacent to
the Philadelphia Customs and Border
Protection port of entry (FTZ Docket 37–
2009, filed 9/9/2009);
Whereas, notice inviting public
comment has been given in the Federal
Register (74 FR 47920–47921,
September 18, 2009) and the application
E:\FR\FM\28MYN1.SGM
28MYN1
29976
Federal Register / Vol. 75, No. 103 / Friday, May 28, 2010 / Notices
has been processed pursuant to the FTZ
Act and the Board’s regulations; and,
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and
Board’s regulations are satisfied, and
that the proposal is in the public
interest;
Now, therefore, the Board hereby
orders:
The application to expand FTZ 272 is
approved, subject to the FTZ Act and
the Board’s regulations, including
Section 400.28, and to the Board’s
standard 2,000-acre activation limit for
the overall general-purpose zone
project, and further subject to a sunset
provision that would terminate
authority on May 31, 2017 for Site 9 if
no activity has occurred under FTZ
procedures before that date.
Signed at Washington, DC, this 13th day of
May 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import
Administration, Alternate Chairman, ForeignTrade Zones Board.
Attest:
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2010–12958 Filed 5–27–10; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–475–826]
Certain Cut–to–Length Carbon–Quality
Steel Plate Products From Italy:
Extension of the Final Results of
Antidumping Duty Administrative
Review
jlentini on DSKJ8SOYB1PROD with NOTICES
AGENCY: Import Administration,
International Trade Administration,
Department of Commerce.
EFFECTIVE DATE: May 28, 2010.
FOR FURTHER INFORMATION CONTACT:
Dmitry Vladimirov, AD/CVD
Operations, Office 5, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW, Washington, DC 20230;
telephone: (202) 482–0665.
SUPPLEMENTARY INFORMATION:
Background
On January 29, 2010, the Department
of Commerce (the Department)
published the preliminary results of the
administrative review of the
antidumping duty order on certain cut–
to-length carbon–quality steel plate
products from Italy. See Certain Cut–to–
VerDate Mar<15>2010
19:07 May 27, 2010
Jkt 220001
Length Carbon-Quality Steel Plate
Products From Italy: Preliminary Results
of Antidumping Duty Administrative
Review, 75 FR 4779 (January 29, 2010).
The review covers the period February
1, 2008, through January 31, 2009. The
final results of this administrative
review were originally due no later than
May 29, 2010. As explained in the
memorandum from the Deputy
Assistant Secretary for Import
Administration, the Department has
exercised its discretion to toll deadlines
for the duration of the closure of the
Federal Government from February 5
through February 12, 2010. Thus, the
deadline for the final results of this
administrative review has been
extended by seven days, until June 5,
2010. See Memorandum to the Record
from Ronald Lorentzen, DAS for Import
Administration, regarding ‘‘Tolling of
Administrative Deadlines As a Result of
the Government Closure During the
Recent Snowstorm,’’ dated February 12,
2010.
Extension of Time Limit for Final
Results
Section 751(a)(3)(A) of the Tariff Act
of 1930, as amended (the Act), requires
the Department to issue the final results
of an administrative review within 120
days after the date on which the
preliminary results are published.
However, if it is not practicable to
complete the review within this time
period, section 751(a)(3)(A) of the Act
allows the Department to extend the
time limit for the final results up to 180
days after the date on which the
preliminary results are published.
The Department finds that it is not
practicable to complete this review by
June 5, 2010, because the Department
requires additional time to consider the
extensive comments submitted by the
interested parties in relation to the
preliminary results of this review.
Consequently, in accordance with
section 751(a)(3)(A) of the Act, the
Department is extending the time limit
for completion of the final results of this
administrative review by 60 days to
August 4, 2010.
This notice is published in
accordance with section 751(a)(3)(A) of
the Act and 19 CFR 351.213(h)(2).
Dated: May 20, 2010.
John M. Andersen,
Acting Deputy Assistant Secretary for
Antidumping and Countervailing Duty
Operations.
[FR Doc. 2010–12963 Filed 5–27–10; 8:45 am]
BILLING CODE 3510–DS–S
PO 00000
Frm 00010
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
International Trade Administration
Initiation of Antidumping and
Countervailing Duty Administrative
Reviews
AGENCY: Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(‘‘the Department’’) has received requests
to conduct administrative reviews of
various antidumping and countervailing
duty orders and findings with April
anniversary dates. In accordance with
the Department’s regulations, we are
initiating those administrative reviews.
DATES: Effective Date: May 28, 2010.
FOR FURTHER INFORMATION CONTACT:
Sheila E. Forbes, Office of AD/CVD
Operations, Customs Unit, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW., Washington, DC 20230,
telephone: (202) 482–4697.
SUPPLEMENTARY INFORMATION:
Background
The Department has received timely
requests, in accordance with 19 CFR
351.213(b), for administrative reviews of
various antidumping and countervailing
duty orders and findings with April
anniversary dates.
Change to the Deadlines for NoShipment Letters and Separate Rate
Certifications
Effective with this Federal Register
notice, the Department is changing the
deadline for submission of No-Shipment
Letters and Separate Rate Certifications
from 30-days after initiation to 60-days
after initiation, as indicated in the
relevant sections of this Federal
Register notice. The Department
requires that a company under review,
which currently has a separate rate,
submit either a No-Shipment Letter or a
Separate Rate Certification, as relevant
to the company’s situation, as described
in the relevant sections of this Federal
Register notice, below. If a company
under review that currently has a
separate rate fails to submit either a NoShipment Letter, a Separate Rate
Certification, or a Separate Rate
Application (as appropriate) for this
POR, the company will not have
demonstrated its eligibility to retain its
separate rate status and will be
considered to be part of the China-wide
entity for purposes of this
administrative review. The
Department’s practice remains
unchanged for companies that do not
E:\FR\FM\28MYN1.SGM
28MYN1
]]>Agencies
[Federal Register Volume 75, Number 103 (Friday, May 28, 2010)]
[Notices]
[Pages 29975-29976]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-12958]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1679]
Expansion of Foreign-Trade Zone 272; Lehigh Valley, Pennsylvania
Pursuant to its authority under the Foreign-Trade Zones Act of
June 18, 1934, as amended (19 U.S.C. 81a-81u), the Foreign-Trade
Zones Board (the Board) adopts the following Order:
Whereas, the Lehigh Valley Economic Development Corporation,
grantee of Foreign-Trade Zone 272, submitted an application to the
Board for authority to expand FTZ 272 to include a site in Bethlehem,
Pennsylvania, adjacent to the Philadelphia Customs and Border
Protection port of entry (FTZ Docket 37-2009, filed 9/9/2009);
Whereas, notice inviting public comment has been given in the
Federal Register (74 FR 47920-47921, September 18, 2009) and the
application
[[Page 29976]]
has been processed pursuant to the FTZ Act and the Board's regulations;
and,
Whereas, the Board adopts the findings and recommendations of the
examiner's report, and finds that the requirements of the FTZ Act and
Board's regulations are satisfied, and that the proposal is in the
public interest;
Now, therefore, the Board hereby orders:
The application to expand FTZ 272 is approved, subject to the FTZ Act
and the Board's regulations, including Section 400.28, and to the
Board's standard 2,000-acre activation limit for the overall general-
purpose zone project, and further subject to a sunset provision that
would terminate authority on May 31, 2017 for Site 9 if no activity has
occurred under FTZ procedures before that date.
Signed at Washington, DC, this 13th day of May 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration, Alternate
Chairman, Foreign-Trade Zones Board.
Attest:
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2010-12958 Filed 5-27-10; 8:45 am]
BILLING CODE 3510-DS-P
