Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 27991-27992 [2010-11961]

Download as PDF Federal Register / Vol. 75, No. 96 / Wednesday, May 19, 2010 / Notices jlentini on DSKJ8SOYB1PROD with NOTICES 1:30 p.m. until 3 p.m. - Surfclam and Ocean Quahog specification setting will be held for 2011–13. 3 p.m. until 4:30 p.m. - Squid, Mackerel, and Butterfish specification setting will be held for 2011. 4:30 p.m. until 5:30 p.m. - The Executive Committee will meet. Thursday, June 10, 2010 8:30 a.m. - The Council will convene. 8:30 a.m. until 11 a.m. - The Council will review public comments and discuss the Omnibus ACL/AM Amendment (Annual Catch Limits / Accountability Measures). 11 a.m. until 12:30 p.m. - The Council will then receive Committee Reports and address any continuing and new business. Agenda items by day for the Council’s Committees and the Council itself are: On Tuesday, June 8 - the Surfclam, Ocean Quahog and Tilefish Committee with Advisors will review the SSC and staff recommendations and advice for 2011–13 quota specifications and associated management measure for surfclams and ocean quahogs; develop 2011–13 quota specifications and associated management measures for Council consideration and action; and receive a presentation on Climate Change and Responses in a Coupled Marine System; the Mid-Atlantic surfclam (MASC) model is being developed as part of a multidisciplinary study looking at adaptation to climate change in a human-natural coupled system. The RSA Committee will review the Mid-Atlantic RSA program performance and develop a mission statement to emphasize ways to improve program coordination with other cooperative research efforts. The Squid, Mackerel, and Butterfish Committee with Advisors will review the SSC and Monitoring Committee’s recommendations and SSC advice for 2011 quota levels and associated management measures; develop 2011 quota specifications and associated management measures for Council consideration and action; address Amendment 11’s outstanding issue: cap capacity via a mackerel limited entry system; and, ratify earlier approved purposes / actions included in Amendment 11. On Wednesday, June 9 - the Ecosystems and Ocean Planning Committee will receive an annual VerDate Mar<15>2010 16:07 May 18, 2010 Jkt 220001 presentation regarding NMFS NERO’s habitat initiatives and programs. The Council will convene to receive a presentation on the outcome of the recent TRAC Assessment of Atlantic mackerel, conduct its Business Session, receive Organizational and Council Liaison Reports, the Executive Director’s Report and receive an update on the status of Council FMPs. The Council will review the Surfclam and Ocean Quahog Committee’s recommendations for 2011–13 quota specifications and associated management measures, and develop and adopt 2011–13 quota specifications and associated management measures for surfclams and ocean quahogs. The Council will review the SMB Committee’s recommendations for 2011 quota specifications and associated management measures, and develop and adopt 2011 quota specifications and associated management measures for Atlantic mackerel, squids, and butterfish. The Executive Committee will review highlights of the May Northeast Regional Coordinating Council (NRCC) meeting; review highlights of the May Council Coordination Committee (CCC) meeting; discuss the framework and the process to move forward with the ‘‘Visioning’’ project suggested at the end of the Council’s March Catch Share Workshop; review and discuss Advisory Panel input in the specification setting process; and, discuss the status of the proposed surfclam excessive share analysis. On Thursday, June 10 - the Council will convene to review Public Hearing oral comments and written comments on the Omnibus ACL / AM Amendment; review the Tilefish trip analysis; address SMB Amendment 11 allocation action and implications for ACLs / AMs; address the means to make future modifications to the ACL / AM Amendment; discuss the integration of the ACL / AM Amendment with Atlantic State Marine Fisheries Commission regarding annual specification setting processes; and, discuss the mechanics of how the August specification setting process will be actualized. Following this action, the Council will receive Committee Reports and discuss any continuing and new business. Although non-emergency issues not contained in this agenda may come before this group for discussion, in PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 27991 accordance with the Magnuson-Stevens Fishery Conservation and Management Act (Magnuson-Stevens Act), those issues may not be the subject of formal action during these meetings. Actions will be restricted to those issues specifically identified in this notice and any issues arising after publication of this notice that require emergency action under Section 305(c) of the Magnuson-Stevens Act, provided the public has been notified of the Council’s intent to take final action to address the emergency. Special Accommodations These meetings are physically accessible to people with disabilities. Requests for sign language interpretation or other auxiliary aid should be directed to M. Jan Saunders, (302) 526–5251, at least 5 days prior to the meeting date. Dated: May 13, 2010. Tracey L. Thompson, Acting Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2010–11895 Filed 5–18–10; 8:45 am] BILLING CODE 3510–22–S DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance AGENCY: Economic Development Administration, Department of Commerce. ACTION: Notice and opportunity for public comment. Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions or certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. E:\FR\FM\19MYN1.SGM 19MYN1 27992 Federal Register / Vol. 75, No. 96 / Wednesday, May 19, 2010 / Notices LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT 4/23/2010 THROUGH 5/12/2010 Date accepted for filing Firm Address Piolax Corporation ................... 139 Etowah Industrial Ct., Canton, GA 30114. 18623 Northline Drive, Cornelius, NC 28031. 1605 Corporate Center Drive, West Bend, WI 53095. 280 Maple Ave., Victor, NY 14564. 41016 Concept Drive, Plymouth, MI 48170. P.O. Box 725, Claremore, OK 74018. 300 Second Avenue, Waltham, MA 02451. Surface Products, Inc .............. BesTech Tool Corp ................. Victor Insulator, Inc ................. Argent International, Inc .......... UPCO, Inc ............................... Photovac, Inc ........................... 4/27/2010 4/27/2010 4/28/2010 Electrical porcelain insulators. 5/4/2010 Self-adhesive sheet, tape and strip parts. 5/6/2010 5/12/2010 UPCO manufactures various oilfield products to include sucker and pony rods, sinker bars and pup joints. Photovac, Inc. manufactures hand-held instruments for detection, measurement, analysis and monitoring of volatile organic compounds (VOCs) in air, soil or groundwater. Product: Flush doors. Materials: Wood, stain, varnish, glue, inlay, sawing, planing, sanding equipment. Process: Plane and sand wood, cut wood pieces, do inlay, glue, sand, stain, varnish, add hardware, inspect, ship. Service industry machinery, specializing in high pressure cleaning equipment. Dakota Micro manufactures the AgCam system, a video camera and monitor system for agricultural applications. The systems are produced using electrical components, which are assembled using either line production or hand assembly into the AgCam systems. New Standard is a manufacturer of metal products for various industries. Products are stamped, fabricated, welded and/or assembled. Metal products—different types of steel, copper pressure leaf filters. Quality Rolling & Deburring Inc. is a metal cleaning and finishing service manufacturer. They finish parts with copper, zinc, nickel, gold and bright tin. Fireplace articles made of steel and copper. 5/12/2010 Laser and machine control systems. 5/7/2010 P.O. Box 178; 3225 Old Darby, MT 59829. 5/4/2010 Sioux Corporation .................... 5/5/2010 Dakota Micro, Inc .................... One Sioux Plaza; P.O. Box Beresford, SD 57004. 8659 148th Ave., SE., Cayuga, ND 58013. New Standard Corporation, Inc 74 Commerce Way, York, PA 17406. 5/4/2010 Quality Rolling & Deburring Inc 135 South Main Street, Thomaston, CT 06787. 5/5/2010 HY–C Company, Inc ............... 2107 N. 14th Street, St. Louis, MO 63106. P.O. Box 189, Jacksonville, MO 72076. jlentini on DSKJ8SOYB1PROD with NOTICES Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 7106, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance. Dated: May 12, 2010. Bryan Borlik, Program Director. [FR Doc. 2010–11961 Filed 5–18–10; 8:45 am] BILLING CODE 3510–24–P VerDate Mar<15>2010 16:07 May 18, 2010 Jkt 220001 The firm produces plastic automotive components/fasteners; primary manufacturing material is plastic. The firm produces counter-tops; manufacturing materials include granite, solid surface & engineered stone. Stamped and machined metal parts. 5/4/2010 Pine Door Manufacturing, Inc AGL Corporation ..................... Products 5/4/2010 DEPARTMENT OF COMMERCE Economic Development Administration [Docket No.: 100427196–0196–01] Solicitation of Applications for the Research and Evaluation Program: FY 2010 Mapping Regional Innovation Clusters Project Competition AGENCY: Economic Development Administration, Department of Commerce. ACTION: Notice and request for applications. SUMMARY: Pursuant to the Research and Evaluation program, the Economic Development Administration (EDA) solicits applications to develop, implement, and disseminate information that will enable policymakers and practitioners to more effectively understand the regional innovation clusters that drive the national economy and how regional assets and innovation inputs help shape PO 00000 Frm 00014 Fmt 4703 Sfmt 4703 these clusters at the local level. EDA’s mission is to lead the Federal economic development agenda by promoting innovation and competitiveness, preparing American regions for growth and success in the worldwide economy. Through its Research and Evaluation program, EDA works towards fulfilling its mission by funding research and technical assistance projects to promote competitiveness and innovation in distressed rural and urban regions throughout the United States and its territories. By working in conjunction with its research partners, EDA will help States, local governments, and community-based organizations to achieve their highest economic potential. DATES: To be considered timely, a completed application, regardless of the format in which it is submitted, must be either (a) transmitted and time-stamped at https://www.grants.gov no later than June 21, 2010, at 5:00 pm Eastern Time; or (b) received by the EDA E:\FR\FM\19MYN1.SGM 19MYN1

Agencies

[Federal Register Volume 75, Number 96 (Wednesday, May 19, 2010)]
[Notices]
[Pages 27991-27992]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-11961]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and opportunity for public comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et 
seq.), the Economic Development Administration (EDA) has received 
petitions or certification of eligibility to apply for Trade Adjustment 
Assistance from the firms listed below. EDA has initiated separate 
investigations to determine whether increased imports into the United 
States of articles like or directly competitive with those produced by 
each firm contributed importantly to the total or partial separation of 
the firm's workers, or threat thereof, and to a decrease in sales or 
production of each petitioning firm.

[[Page 27992]]



   List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment 4/23/2010
                                                Through 5/12/2010
----------------------------------------------------------------------------------------------------------------
                                                                    Date accepted
                 Firm                            Address             for filing               Products
----------------------------------------------------------------------------------------------------------------
Piolax Corporation....................  139 Etowah Industrial           4/27/2010  The firm produces plastic
                                         Ct., Canton, GA 30114.                     automotive components/
                                                                                    fasteners; primary
                                                                                    manufacturing material is
                                                                                    plastic.
Surface Products, Inc.................  18623 Northline Drive,          4/27/2010  The firm produces counter-
                                         Cornelius, NC 28031.                       tops; manufacturing
                                                                                    materials include granite,
                                                                                    solid surface & engineered
                                                                                    stone.
BesTech Tool Corp.....................  1605 Corporate Center           4/28/2010  Stamped and machined metal
                                         Drive, West Bend, WI                       parts.
                                         53095.
Victor Insulator, Inc.................  280 Maple Ave., Victor,          5/4/2010  Electrical porcelain
                                         NY 14564.                                  insulators.
Argent International, Inc.............  41016 Concept Drive,             5/4/2010  Self-adhesive sheet, tape and
                                         Plymouth, MI 48170.                        strip parts.
UPCO, Inc.............................  P.O. Box 725, Claremore,         5/6/2010  UPCO manufactures various
                                         OK 74018.                                  oilfield products to include
                                                                                    sucker and pony rods, sinker
                                                                                    bars and pup joints.
Photovac, Inc.........................  300 Second Avenue,               5/7/2010  Photovac, Inc. manufactures
                                         Waltham, MA 02451.                         hand-held instruments for
                                                                                    detection, measurement,
                                                                                    analysis and monitoring of
                                                                                    volatile organic compounds
                                                                                    (VOCs) in air, soil or
                                                                                    groundwater.
Pine Door Manufacturing, Inc..........  P.O. Box 178; 3225 Old           5/4/2010  Product: Flush doors.
                                         Darby, MT 59829.                           Materials: Wood, stain,
                                                                                    varnish, glue, inlay,
                                                                                    sawing, planing, sanding
                                                                                    equipment. Process: Plane
                                                                                    and sand wood, cut wood
                                                                                    pieces, do inlay, glue,
                                                                                    sand, stain, varnish, add
                                                                                    hardware, inspect, ship.
Sioux Corporation.....................  One Sioux Plaza; P.O. Box        5/5/2010  Service industry machinery,
                                         Beresford, SD 57004.                       specializing in high
                                                                                    pressure cleaning equipment.
Dakota Micro, Inc.....................  8659 148th Ave., SE.,            5/4/2010  Dakota Micro manufactures the
                                         Cayuga, ND 58013.                          AgCam system, a video camera
                                                                                    and monitor system for
                                                                                    agricultural applications.
                                                                                    The systems are produced
                                                                                    using electrical components,
                                                                                    which are assembled using
                                                                                    either line production or
                                                                                    hand assembly into the AgCam
                                                                                    systems.
New Standard Corporation, Inc.........  74 Commerce Way, York, PA        5/4/2010  New Standard is a
                                         17406.                                     manufacturer of metal
                                                                                    products for various
                                                                                    industries. Products are
                                                                                    stamped, fabricated, welded
                                                                                    and/or assembled. Metal
                                                                                    products--different types of
                                                                                    steel, copper pressure leaf
                                                                                    filters.
Quality Rolling & Deburring Inc.......  135 South Main Street,           5/5/2010  Quality Rolling & Deburring
                                         Thomaston, CT 06787.                       Inc. is a metal cleaning and
                                                                                    finishing service
                                                                                    manufacturer. They finish
                                                                                    parts with copper, zinc,
                                                                                    nickel, gold and bright tin.
HY-C Company, Inc.....................  2107 N. 14th Street, St.        5/12/2010  Fireplace articles made of
                                         Louis, MO 63106.                           steel and copper.
AGL Corporation.......................  P.O. Box 189,                   5/12/2010  Laser and machine control
                                         Jacksonville, MO 72076.                    systems.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter. A written request for a hearing 
must be submitted to the Trade Adjustment Assistance for Firms 
Division, Room 7106, Economic Development Administration, U.S. 
Department of Commerce, Washington, DC 20230, no later than ten (10) 
calendar days following publication of this notice.
    Please follow the procedures set forth in Section 315.9 of EDA's 
final rule (71 FR 56704) for procedures for requesting a public 
hearing. The Catalog of Federal Domestic Assistance official program 
number and title of the program under which these petitions are 
submitted is 11.313, Trade Adjustment Assistance.

    Dated: May 12, 2010.
Bryan Borlik,
Program Director.
[FR Doc. 2010-11961 Filed 5-18-10; 8:45 am]
BILLING CODE 3510-24-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.