Substantial Product Hazard List: Hand-Held Hair Dryers, 27504-27507 [2010-11624]

Download as PDF 27504 Federal Register / Vol. 75, No. 94 / Monday, May 17, 2010 / Proposed Rules List of Subjects in 16 CFR Part 1120 Administrative practice and procedure, Clothing, Consumer protection, Infants and children, Imports, Incorporation by reference. For the reasons stated above, and under the authority of 15 U.S.C. 2064(j), 5 U.S.C. 553, and section 3 of Public Law 110–314, 122 Stat. 3016 (August 14, 2008), the Consumer Product Safety Commission proposes to amend 16 CFR part 1120, as proposed to be added elsewhere in this issue of the Federal Register, as follows: PART 1120—SUBSTANTIAL PRODUCT HAZARD LIST 1. The authority citation for part 1120 is revised to read as follows: Authority: 15 U.S.C. 2064(j); Sec. 3, Pub. L. 110–314, 122 Stat. 3016. 2. In § 1120.2, add paragraph (c) to read as follows: § 1120.2 Definitions. * * * * * (c) Drawstring means a non-retractable cord, ribbon, or tape of any material to pull together parts of outerwear to provide for closure. 3. In § 1120.3, add paragraph (b) to read as follows: § 1120.3 Substantial product hazard list. mstockstill on DSKH9S0YB1PROD with PROPOSALS * * * * * (b) (1) Children’s upper outerwear in sizes 2T to 16 or the equivalent, and having one or more drawstrings, that is subject to, but not in conformance with, the requirements of ASTM F 1816–97, Standard Safety Specification for Drawstrings on Children’s Upper Outerwear. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959 USA, telephone: 610–832–9585; https:// www2.astm.org/. You may inspect a copy at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 502, 4330 East West Highway, Bethesda, MD 20814, telephone 301– 504–7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741– 6030, or go to: https://www.archives.gov/ federal_register/code_of_federal_ regulations/ibr_locations.html. (2) At its option, the Commission may use one or more of the following methods to determine what sizes of children’s upper outerwear are equivalent to sizes 2T to 16: VerDate Mar<15>2010 17:12 May 14, 2010 Jkt 220001 (i) Garments in girls’ size Large (L) and boys’ size Large (L) are equivalent to girls’ or boys’ size 12, respectively. Garments in girls’ and boys’ sizes smaller than Large (L), including ExtraSmall (XS), Small (S), and Medium (M), are equivalent to sizes smaller than size 12. The fact that an item of children’s upper outerwear with a hood and neck drawstring is labeled as being larger than Large (L) does not necessarily mean that the item is not equivalent to a size in the range of 2T to 12. (ii) Garments in girls’ size Extra-Large (XL) and boys’ size Extra-Large (XL) are equivalent to size 16. The fact that an item of children’s upper outerwear with a waist or bottom drawstring is labeled as being larger than Extra-Large (XL) does not necessarily mean that the item is not equivalent to a size in the range of 2T to 16. (iii) In cases where garment labels give a range of sizes, if the range includes any size that is subject to a requirement in ASTM F 1816–97, the garment will be considered subject, even if other sizes in the stated range, taken alone, would not be subject to the requirement. For example, a coat sized 12 through 14 remains subject to the prohibition of hood and neck area drawstrings, even though this requirement of the ASTM standard only applies to garments up to size 12. A size 13 through 15 coat would not be considered within the scope of the ASTM standard’s prohibition of neck and hood drawstrings, but would be subject to the requirements for waist or bottom drawstrings. (iv) To fall within the scope of paragraphs (b)(2)(i) through (2)(iii) of this section, a garment need not state anywhere on it, or on its tags, labels, package, or any other materials accompanying it, the term ‘‘girls,’’ the term ‘‘boys,’’ or whether the garment is designed or intended for girls or boys. (v) The Commission may determine equivalency to be as stated in a manufacturer’s (including importer’s), distributor’s, or retailer’s statements of what sizes are equivalent to sizes 2T to 16. A firm’s statement of what sizes are equivalent to sizes 2T to 16 may not be used to show that the size of a garment is not equivalent to a size in the range of 2T to 16. (vi) The Commission may use any other evidence that would tend to show that an item of children’s upper outerwear is a size that is equivalent to sizes 2T to 16. PO 00000 Frm 00049 Fmt 4702 Sfmt 4702 Dated: May 11, 2010. Todd Stevenson, Secretary, U.S. Consumer Product Safety Commission. [FR Doc. 2010–11622 Filed 5–14–10; 8:45 am] BILLING CODE 6355–01–P CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1120 [CPSC Docket No. CPSC–2010–0042] Substantial Product Hazard List: HandHeld Hair Dryers AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking. SUMMARY: The Consumer Product Safety Improvement Act of 2008 (‘‘CPSIA’’), authorizes the United States Consumer Product Safety Commission (‘‘Commission’’) to specify, by rule, for any consumer product or class of consumer products, characteristics whose existence or absence shall be deemed a substantial product hazard under certain circumstances. In this document, the Commission is proposing a rule to determine that any hand-held hair dryer without integral immersion protection presents a substantial product hazard. DATE: Written comments in response to this notice must be received by August 2, 2010. ADDRESSES: You may submit comments, identified by Docket No. CPSC–2010– 0042, by any of the following methods: Electronic Submissions Submit electronic comments in the following way: Federal eRulemaking Portal: https:// www.regulations.gov. Follow the instructions for submitting comments. To ensure timely processing of comments, the Commission is no longer accepting comments submitted by electronic mail (e-mail) except through https://www.regulations.gov. Written Submissions Submit written submissions in the following way: Mail/Hand delivery/Courier (for paper, disk, or CD–ROM submissions), preferably in five copies, to: Office of the Secretary, Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814; telephone (301) 504–7923. Instructions: All submissions received must include the agency name and docket number for this rulemaking. All comments received may be posted E:\FR\FM\17MYP1.SGM 17MYP1 Federal Register / Vol. 75, No. 94 / Monday, May 17, 2010 / Proposed Rules mstockstill on DSKH9S0YB1PROD with PROPOSALS without change, including any personal identifiers, contact information, or other personal information provided, to https://www.regulations.gov. Do not submit confidential business information, trade secret information, or other sensitive or protected information electronically. Such information should be submitted in writing. Docket: For access to the docket to read background documents or comments received, go to https:// www.regulations.gov. FOR FURTHER INFORMATION CONTACT: Randy Butturini, Office of Hazard Identification and Reduction, Consumer Product Safety Commission, 4330 EastWest Highway, Bethesda, MD 20814; telephone (301) 504–7562, rbutturini@cpsc.gov. SUPPLEMENTARY INFORMATION: A. Background and Statutory Authority The Consumer Product Safety Improvement Act of 2008 (‘‘CPSIA’’) was enacted on August 14, 2008. Public Law 110–314, 122 Stat. 3016 (August 14, 2008). The CPSIA amends statutes which the U.S. Consumer Product Safety Commission (‘‘Commission’’ or ‘‘CPSC’’) administers, and adds certain new requirements. Section 223 of the CPSIA expands section 15 of the Consumer Product Safety Act (‘‘CPSA’’) to add a new subsection (j). That subsection delegates to the Commission authority to specify by rule for a consumer product or class of consumer products, characteristics whose presence or absence the Commission considers present a substantial product hazard. Those characteristics must be readily observable, have been addressed by an applicable voluntary standard that has been effective in reducing the risk of injury, and there must be substantial compliance with the voluntary standard. 15 U.S.C. 2064(j). Underwriters Laboratories (‘‘UL’’) Standard for Safety for Household Electric Personal Grooming Appliances, UL 859, is a voluntary standard that specifies immersion protection requirements for certain household appliances, including hand-held hair dryers. The current immersion protection provisions have been in effect since 1991. UL Standard for Safety for Commercial Electric Personal Grooming Appliances, UL 1727, specifies immersion protection requirements for grooming appliances, including hand-held hair dryers, which are ‘‘intended for use by qualified personnel in commercial establishments such as beauty parlors, barber shops, or cosmetic studios.’’ UL 1727 requires the VerDate Mar<15>2010 17:12 May 14, 2010 Jkt 220001 same integral immersion protection as UL 859. Such ‘‘commercial’’ hand-held hair dryers may be consumer products if they are available for sale to, or use of, consumers. The Commission is proposing a rule to deem any hand-held hair dryer without integral immersion protection, as specified in UL 859 or UL 1727, a substantial product hazard. Hand-held hair dryers, most often used in bathrooms and near water, are subject to accidental immersion during their use. Section 15(a) of the CPSA defines ‘‘substantial product hazard’’ to include, a product defect which (because of the pattern of defect, the number of defective products distributed in commerce, the severity of the risk, or otherwise) creates a substantial risk of injury to the public. 15 U.S.C. 1064(a) On November 25, 2002, CPSC’s Director of the Office of Compliance sent a letter to manufacturers and importers of hand-held hair dryers stating that CPSC staff considers hair dryers available for sale to, or use by, consumers to present a substantial product hazard if they do not have immersion protection as required by UL 859. The letter urged manufacturers and importers to assure that their hand-held hair dryers provide immersion protection. The letter noted that ‘‘[s]ome firms market hand held hair dryers that they contend are intended for professional use only, that is, for use by professionals in hair salons. However, the staff also considers ‘professional’ hair dryers that are available for sale to consumers and that fail to provide immersion protection to be defective and to present a substantial product hazard.’’ B. The Product A hand-held hair dryer is a portable electrical appliance with a cord-andplug connection. Typically, they have a big barrel-like body with a pistol grip handle. Frequently, such hair dryers have two control switches or knobs: one turns the unit on and off and may allow the user to adjust the blower speed; the second adjusts the heat setting, often ‘‘cool/low/high.’’ Hand-held hair dryers routinely contain open-coil heating elements that are, in essence, uninsulated, electrically energized wires across which a fan blows air. These dryers are typically used in bathrooms near water sources, such as sinks, bathtubs, and lavatories. Being uninsulated, if the heating element were to contact water, an alternative current flow path could easily be created, posing the risk of shock or electrocution to the user holding the dryer (or PO 00000 Frm 00050 Fmt 4702 Sfmt 4702 27505 retrieving it after dropping it into a sink, bathtub, or lavatory). The proposed rule would define ‘‘hand-held hair dryer’’ as ‘‘an electrical appliance, intended to be held with one hand during use, which creates a flow of air over or through a self-contained heating element for the purpose of drying hair.’’ The characteristics of a hand-held hair dryer with integral immersion protection are readily observable. The power cord of a hand-held hair dryer with integral immersion protection has a large block-shaped plug that incorporates a type of circuit interrupter which is either a Ground Fault Circuit Interrupter (‘‘GFCI’’), an Appliance Leakage Circuit Interrupter (‘‘ALCI’’), or an Immersion Detection Circuit Interrupter (‘‘IDCI’’). The plug usually also has buttons labeled ‘‘Test’’ and ‘‘Reset.’’ If the hair dryer should become wetted or immersed in water enough to cause electrical current to flow beyond normal circuitry, the circuit interrupter will sense the flow and, in a fraction of a second, disconnect the hair dryer from its power source, preventing serious injury or death to a consumer. An estimated 23 million units of hand-held hair dryers are sold annually. The staff does not know exactly how many companies supply hand-held hair dryers. Sixteen suppliers of hand-held hair dryers are listed in the UL Online Certifications Directory as being in compliance with UL 859. An additional 42 companies are listed in the Intertek ETL Listed Mark Product Directory as complying with the UL 859 standard. Ten firms are listed to the UL 1727 standard on UL’s Online Certifications directory and another four firms are listed in the Intertek ETL Listed Mark Product Directory as being in compliance with UL 1727. In 2007, the three largest suppliers listed accounted for approximately 92% of domestic hand-held hair dryer sales. C. The Risk of Injury The Commission has reports of 104 deaths and 43 electric shock injuries due to hair dryer immersion/water contact from 1984 to 2004. Of the 104 electrocutions resulting in death, the most incidents (91) occurred during 1984–90 (before the current immersion protection provisions of UL 859 took effect) compared to 12 during 1991–97, and one during 1998–04. During 1980–86, before the introduction of the initial UL requirements for hair dryers, a total of 110 electrocutions (15.7 annual average) were reported due to hair dryer immersion/water contact. In 1987, UL implemented a change to voluntary E:\FR\FM\17MYP1.SGM 17MYP1 27506 Federal Register / Vol. 75, No. 94 / Monday, May 17, 2010 / Proposed Rules standard UL 859 to require immersion protection for hand-held hair dryers if the dryer switch was in the ‘‘off’’ position. During 1987–90, a total of 39 such electrocutions (9.75 annual average) were reported. In 1991, a revision to the UL standard requiring immersion protection in the ‘‘off’’ as well as ‘‘on’’ position took effect. During 1991–97, after the enhanced standard took effect, a total of 12 electrocutions (1.71 annual average) were reported and three electrocutions (0.3 annual average) were reported during 1998–2007, a period when most hair dryers made before 1991 were likely to be out of use. Reporting is ongoing for the years 2006 and 2007. mstockstill on DSKH9S0YB1PROD with PROPOSALS D. Voluntary Standards Hand-held hair dryers are included in UL 859, Standard for Safety for Household Electric Personal Grooming Appliances. In 1985, UL revised this standard to require protection against electrocution when a hair dryer is plugged into an electrical outlet, with its switch in the ‘‘off’’ position, and is immersed in water. The requirement took effect in October 1987. Between 1987 and 1990, the average number of reported deaths from hair dryer immersion/water contact dropped to approximately 10 deaths per year. In 1990, the National Electrical Code (NEC) (Article 422–24, 1990 edition) instituted requirements for protection against electrocutions from immersion of hair dryers when the switch is in either the ‘‘on’’ or the ‘‘off’’ position. In 1987, UL, in keeping with NEC, revised its immersion protection standard to require that ‘‘A handsupported hair-drying appliance (such as a hair dryer, blower-styler, heated air comb, heated air hair curler, curling iron-hair dryer combination, a wallhung hair dryer or hand unit of a wallmounted hair dryer, or similar appliance) shall be constructed to reduce the risk of electric shock when the appliance is energized, with its power switch in either the ‘‘on’’ or ‘‘off’’ position, and immersed in water having an electrically conductive path to ground.’’ This revision, which took effect January 1, 1991, expanded immersion protection to cover the appliance whether the switch was in the ‘‘on’’ or ‘‘off’’ position. As discussed in section C of this document, the reported incidents of death from immersion-related electrocutions involving hand-held hair dryers significantly declined with implementation of immersion protection requirements in UL 859. The average number of reported hand-held VerDate Mar<15>2010 17:12 May 14, 2010 Jkt 220001 hair dryer electrocutions resulting in death is now less than one per year. UL 1727, Standard for Safety for Commercial Electric Personal Grooming Appliances, originally issued in 1986, was revised to include the same integral immersion protection as UL 859 after the full immersion protection requirements in UL 859 proved to be effective. These requirements in UL 1727 became effective March 31, 1994. E. Recalls As noted in section A of this document, in November 2002, the director of the Office of Compliance sent a letter to importers and manufacturers of hand-held hair dryers indicating the staff’s expectation that such hair dryers should have immersion protection and that the staff would consider them to present a substantial product hazard if they did not. There have been numerous recalls of hand-held hair dryers due to lack of immersion protection. Since January 1, 1991, there have been 30 recalls of hand-held hair dryers due to lack of an immersion protection device. Of these, three occurred during the year 2009. F. Substantial Compliance There is no statutory definition of ‘‘substantial compliance’’ in either the CPSIA or the CPSA. Legislative history of the CPSA provision that is related to issuance of consumer product safety standards indicates that substantial compliance should be measured by reference to the number of complying products, rather than the number of manufacturers of products complying with the standard. H.R. Rep. No. 208, 97th Cong., 1st Sess. 871 (1981). Legislative history of this CPSA rulemaking provision also indicates that there is substantial compliance when the unreasonable risk of injury associated with a product will be eliminated or adequately reduced ‘‘in a timely fashion.’’ Id. The Commission has not taken the position that there is any particular percentage that differentiates substantial compliance from something that is not substantial compliance. Rather than any bright line, the Commission has been of the view in the rulemaking context that the determination needs to be made on a case-by-case basis. The staff estimates sales of hand-held hair dryers are about 23 million units annually. There are 16 suppliers of hand-held hair dryers listed in the UL Online Certifications Directory, and an additional 42 suppliers listed in the Intertek ETL Listed Mark Product Directory as supplying hand-held hair dryers compliant with UL 859. Ten PO 00000 Frm 00051 Fmt 4702 Sfmt 4702 firms are listed to the UL 1727 standard on UL’s Online Certifications Directory and another four firms are listed in the Intertek ETL Listed Mark Product Directory as being in compliance with UL 1727. In 2007, the three largest suppliers listed accounted for approximately 92% of domestic hand-held hair dryer sales. As discussed above, additional suppliers are also listed as supplying hand-held hair dryers that are in compliance with the UL standards. Since the three largest suppliers (which are listed as producing hair dryers that comply with the UL standards) account for 92% of the domestic sales of handheld hair dryers and additional companies are also listed as producing complying hand-held hair dryers, the staff estimates that over 95% of handheld hair dryers for sale in this country comply with the UL standards. The Commission, therefore, determines that there is substantial compliance with UL 859 and UL 1727. G. Effect of Section 15(j) Rule Section 15(j) of the CPSA allows the Commission to issue a rule specifying that a consumer product (or class of consumer products) has characteristics whose presence or absence creates a substantial product hazard. Placing a consumer product on this substantial product hazard list has certain ramifications. A product that is or has a substantial product hazard is subject to the reporting requirements of section 15(b) of the CPSA. 15 U.S.C. 2064(b). A manufacturer who fails to report a substantial product hazard to the Commission is subject to civil penalties under section 20 of the CPSA and possibly to criminal penalties under section 21 of the CPSA. Id. 2069 & 2070. A product that is or contains a substantial product hazard is subject to corrective action under section 15(c) and (d) of the CPSA. Id. 2064(c) & (d). Thus, the Commission can order the manufacturer, distributor or retailer of the product to offer to repair or replace the product, or to refund the purchase price to the consumer. Finally, a product that is offered for import into the United States and is or contains a substantial product hazard shall be refused admission into the United States under section 17(a) of the CPSA. Id. 2066(a). H. Regulatory Flexibility Certification The Regulatory Flexibility Act (‘‘RFA’’) generally requires that agencies review proposed rules for their potential economic impact on small entities, including small businesses. 5 U.S.C. 601–612. As noted in section B of this E:\FR\FM\17MYP1.SGM 17MYP1 Federal Register / Vol. 75, No. 94 / Monday, May 17, 2010 / Proposed Rules document above, CPSC has identified 58 suppliers of hand-held hair dryers to the U.S. consumer market which provide products listed to the UL standard. Three large firms supply approximately 92% of the U.S. market share. According to the Small Business Administration Size Standards, these three firms are not small businesses. According to the UL Online Certifications Directory and the Intertek ETL Listed Mark Products Directory, these three firms plus an additional 55 firms are UL listed to produce complying hair dryers. All but one of these 55 firms appears to be a small business. Thus, the overwhelming majority of hair dryers sold in the United States are already UL listed. Since the majority of businesses (both large and small) are already in compliance with the voluntary standard, the proposed rule is not expected to pose a significant burden to small business. Therefore, the Commission certifies that, in accordance with section 605 of the RFA, the rule, if promulgated, will not have a significant economic impact on a substantial number of small entities. I. Environmental Considerations A rule determining that hand-held hair dryers without immersion protection in accordance with UL 859 or UL 1727 present a substantial product hazard is not expected to have an adverse impact on the environment and is considered to be a ‘‘categorical exclusion’’ for the purposes of the National Environmental Policy Act according to the CPSC regulations that cover its ‘‘environmental review’’ procedures (16 CFR 1021.5(c)(1)). mstockstill on DSKH9S0YB1PROD with PROPOSALS J. Paperwork Reduction Act This proposed rule would not impose any information collection requirements. Accordingly, this rule is not subject to the Paperwork Reduction Act, 44 U.S.C. 3501–3520. K. Effective Date The proposed effective date of Part 1120, which declares that any held-held hair dryer without immersion protection, as specified in UL 859 or UL 1727, is a substantial product hazard, is 30 days from issuance of any final regulation in the Federal Register. Thus, it would apply to hand-held hair dryers imported or introduced into commerce 30 days or more after publication of any final rule in the Federal Register. L. Preemption The proposed rule would place handheld hair dryers without integral immersion protection on a list of VerDate Mar<15>2010 17:12 May 14, 2010 Jkt 220001 27507 products that present a substantial product hazard. The proposed rule does not establish a consumer product safety standard. The preemption provisions in section 26(a) of the CPSA, 15 U.S.C. 2075(a), apply when a consumer product safety standard is in effect. Therefore, section 26(a) of the CPSA would not apply to this rule. commerce, the severity of the risk, or otherwise) creates a substantial risk of injury to the public. (b) Hand-held hair dryer means an electrical appliance, intended to be held with one hand during use, which creates a flow of air over or through a self-contained heating element for the purpose of drying hair. M. Request for Comments The Commission invites interested persons to submit their comments to the Commission on any aspect of the proposed rule. Comments should be submitted as provided in the instructions in the ADDRESSES section at the beginning of this notice. § 1120.3 List of Subjects in 16 CFR Part 1120 Administrative practice and procedure, Consumer protection, Household appliances, Imports, Incorporation by reference. Therefore, the Commission proposes to amend Title 16 of the Code of Federal Regulations by adding part 1120 to read as follows: PART 1120—SUBSTANTIAL PRODUCT HAZARD LIST Sec. 1120.1 1120.2 1120.3 Authority Definitions Substantial product hazard list Authority: 15 U.S.C. 2064(j). § 1120.1 Authority. Under the authority of section 15(j) of the Consumer Product Safety Act (CPSA), the Commission determines that consumer products or classes of consumer products listed in § 1120.3 have characteristics whose existence or absence presents a substantial product hazard under section 15(a)(2) of the CPSA. The Commission has determined that the listed products have characteristics that are readily observable and have been addressed by a voluntary standard, that the voluntary standard has been effective, and that there is substantial compliance with the voluntary standard. The listed products are subject to the reporting requirements of section 15(b) of the CPSA and to the recall provisions of section 15(c) and (d) of the CPSA, and shall be refused entry into the United States under section 17(a)(4) of the CPSA. § 1120.2 Frm 00052 Fmt 4702 Dated: May 11, 2010. Todd Stevenson, Secretary, U.S. Consumer Product Safety Commission. [FR Doc. 2010–11624 Filed 5–14–10; 8:45 am] BILLING CODE 6355–01–P DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG–2010–0349] Definitions. The definitions in section 3 of the Consumer Product Safety Act (15 U.S.C. 2052) apply to this part 1120. (a) Substantial product hazard means a product defect which (because of the pattern of defect, the number of defective products distributed in PO 00000 Substantial product hazard list. The following products or class of products shall be deemed to be substantial product hazards under section 15(a)(2) of the CPSA. (a) Hand-held hair dryers that do not provide integral immersion protection in compliance with the requirements of section 5 of Underwriters Laboratories (UL) Standard for Safety for Household Electric Personal Grooming Appliances, UL 859–2007, 10th Edition, approved March 21, 2007, or section 6 of UL Standard for Safety for Commercial Electric Personal Grooming Appliances, UL 1727, 4th Edition, approved March 25, 1999. The Director of the Federal Register approves these incorporations by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from UL, Inc., 333 Pfingsten Road, Northbrook, IL 60062. You may inspect a copy at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 502, 4330 East West Highway, Bethesda, MD 20814, telephone 301–504–7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: https://www.archives.gov/ federal_register/code_of_federal_ regulations/ibr_locations.html. (b) [Reserved] Sfmt 4702 RIN 1625–AA08 Safety Zone; Delaware River, Big Timber Creek, Westville, NJ Coast Guard, DHS. Notice of Proposed Rulemaking. AGENCY: ACTION: E:\FR\FM\17MYP1.SGM 17MYP1

Agencies

[Federal Register Volume 75, Number 94 (Monday, May 17, 2010)]
[Proposed Rules]
[Pages 27504-27507]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-11624]


-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

16 CFR Part 1120

[CPSC Docket No. CPSC-2010-0042]


Substantial Product Hazard List: Hand-Held Hair Dryers

AGENCY: Consumer Product Safety Commission.

ACTION: Notice of proposed rulemaking.

-----------------------------------------------------------------------

SUMMARY: The Consumer Product Safety Improvement Act of 2008 
(``CPSIA''), authorizes the United States Consumer Product Safety 
Commission (``Commission'') to specify, by rule, for any consumer 
product or class of consumer products, characteristics whose existence 
or absence shall be deemed a substantial product hazard under certain 
circumstances. In this document, the Commission is proposing a rule to 
determine that any hand-held hair dryer without integral immersion 
protection presents a substantial product hazard.

DATE: Written comments in response to this notice must be received by 
August 2, 2010.

ADDRESSES: You may submit comments, identified by Docket No. CPSC-2010-
0042, by any of the following methods:

Electronic Submissions

    Submit electronic comments in the following way:
    Federal eRulemaking Portal: https://www.regulations.gov. Follow the 
instructions for submitting comments.
    To ensure timely processing of comments, the Commission is no 
longer accepting comments submitted by electronic mail (e-mail) except 
through https://www.regulations.gov.

Written Submissions

    Submit written submissions in the following way:
    Mail/Hand delivery/Courier (for paper, disk, or CD-ROM 
submissions), preferably in five copies, to: Office of the Secretary, 
Consumer Product Safety Commission, Room 820, 4330 East West Highway, 
Bethesda, MD 20814; telephone (301) 504-7923.
    Instructions: All submissions received must include the agency name 
and docket number for this rulemaking. All comments received may be 
posted

[[Page 27505]]

without change, including any personal identifiers, contact 
information, or other personal information provided, to https://www.regulations.gov. Do not submit confidential business information, 
trade secret information, or other sensitive or protected information 
electronically. Such information should be submitted in writing.
    Docket: For access to the docket to read background documents or 
comments received, go to https://www.regulations.gov.

FOR FURTHER INFORMATION CONTACT: Randy Butturini, Office of Hazard 
Identification and Reduction, Consumer Product Safety Commission, 4330 
East-West Highway, Bethesda, MD 20814; telephone (301) 504-7562, 
rbutturini@cpsc.gov.

SUPPLEMENTARY INFORMATION:

A. Background and Statutory Authority

    The Consumer Product Safety Improvement Act of 2008 (``CPSIA'') was 
enacted on August 14, 2008. Public Law 110-314, 122 Stat. 3016 (August 
14, 2008). The CPSIA amends statutes which the U.S. Consumer Product 
Safety Commission (``Commission'' or ``CPSC'') administers, and adds 
certain new requirements.
    Section 223 of the CPSIA expands section 15 of the Consumer Product 
Safety Act (``CPSA'') to add a new subsection (j). That subsection 
delegates to the Commission authority to specify by rule for a consumer 
product or class of consumer products, characteristics whose presence 
or absence the Commission considers present a substantial product 
hazard. Those characteristics must be readily observable, have been 
addressed by an applicable voluntary standard that has been effective 
in reducing the risk of injury, and there must be substantial 
compliance with the voluntary standard. 15 U.S.C. 2064(j).
    Underwriters Laboratories (``UL'') Standard for Safety for 
Household Electric Personal Grooming Appliances, UL 859, is a voluntary 
standard that specifies immersion protection requirements for certain 
household appliances, including hand-held hair dryers. The current 
immersion protection provisions have been in effect since 1991. UL 
Standard for Safety for Commercial Electric Personal Grooming 
Appliances, UL 1727, specifies immersion protection requirements for 
grooming appliances, including hand-held hair dryers, which are 
``intended for use by qualified personnel in commercial establishments 
such as beauty parlors, barber shops, or cosmetic studios.'' UL 1727 
requires the same integral immersion protection as UL 859. Such 
``commercial'' hand-held hair dryers may be consumer products if they 
are available for sale to, or use of, consumers.
    The Commission is proposing a rule to deem any hand-held hair dryer 
without integral immersion protection, as specified in UL 859 or UL 
1727, a substantial product hazard. Hand-held hair dryers, most often 
used in bathrooms and near water, are subject to accidental immersion 
during their use. Section 15(a) of the CPSA defines ``substantial 
product hazard'' to include, a product defect which (because of the 
pattern of defect, the number of defective products distributed in 
commerce, the severity of the risk, or otherwise) creates a substantial 
risk of injury to the public. 15 U.S.C. 1064(a)
    On November 25, 2002, CPSC's Director of the Office of Compliance 
sent a letter to manufacturers and importers of hand-held hair dryers 
stating that CPSC staff considers hair dryers available for sale to, or 
use by, consumers to present a substantial product hazard if they do 
not have immersion protection as required by UL 859. The letter urged 
manufacturers and importers to assure that their hand-held hair dryers 
provide immersion protection. The letter noted that ``[s]ome firms 
market hand held hair dryers that they contend are intended for 
professional use only, that is, for use by professionals in hair 
salons. However, the staff also considers `professional' hair dryers 
that are available for sale to consumers and that fail to provide 
immersion protection to be defective and to present a substantial 
product hazard.''

B. The Product

    A hand-held hair dryer is a portable electrical appliance with a 
cord-and-plug connection. Typically, they have a big barrel-like body 
with a pistol grip handle. Frequently, such hair dryers have two 
control switches or knobs: one turns the unit on and off and may allow 
the user to adjust the blower speed; the second adjusts the heat 
setting, often ``cool/low/high.'' Hand-held hair dryers routinely 
contain open-coil heating elements that are, in essence, uninsulated, 
electrically energized wires across which a fan blows air. These dryers 
are typically used in bathrooms near water sources, such as sinks, 
bathtubs, and lavatories. Being uninsulated, if the heating element 
were to contact water, an alternative current flow path could easily be 
created, posing the risk of shock or electrocution to the user holding 
the dryer (or retrieving it after dropping it into a sink, bathtub, or 
lavatory).
    The proposed rule would define ``hand-held hair dryer'' as ``an 
electrical appliance, intended to be held with one hand during use, 
which creates a flow of air over or through a self-contained heating 
element for the purpose of drying hair.''
    The characteristics of a hand-held hair dryer with integral 
immersion protection are readily observable. The power cord of a hand-
held hair dryer with integral immersion protection has a large block-
shaped plug that incorporates a type of circuit interrupter which is 
either a Ground Fault Circuit Interrupter (``GFCI''), an Appliance 
Leakage Circuit Interrupter (``ALCI''), or an Immersion Detection 
Circuit Interrupter (``IDCI''). The plug usually also has buttons 
labeled ``Test'' and ``Reset.'' If the hair dryer should become wetted 
or immersed in water enough to cause electrical current to flow beyond 
normal circuitry, the circuit interrupter will sense the flow and, in a 
fraction of a second, disconnect the hair dryer from its power source, 
preventing serious injury or death to a consumer.
    An estimated 23 million units of hand-held hair dryers are sold 
annually. The staff does not know exactly how many companies supply 
hand-held hair dryers. Sixteen suppliers of hand-held hair dryers are 
listed in the UL Online Certifications Directory as being in compliance 
with UL 859. An additional 42 companies are listed in the Intertek ETL 
Listed Mark Product Directory as complying with the UL 859 standard. 
Ten firms are listed to the UL 1727 standard on UL's Online 
Certifications directory and another four firms are listed in the 
Intertek ETL Listed Mark Product Directory as being in compliance with 
UL 1727. In 2007, the three largest suppliers listed accounted for 
approximately 92% of domestic hand-held hair dryer sales.

C. The Risk of Injury

    The Commission has reports of 104 deaths and 43 electric shock 
injuries due to hair dryer immersion/water contact from 1984 to 2004. 
Of the 104 electrocutions resulting in death, the most incidents (91) 
occurred during 1984-90 (before the current immersion protection 
provisions of UL 859 took effect) compared to 12 during 1991-97, and 
one during 1998-04.
    During 1980-86, before the introduction of the initial UL 
requirements for hair dryers, a total of 110 electrocutions (15.7 
annual average) were reported due to hair dryer immersion/water 
contact. In 1987, UL implemented a change to voluntary

[[Page 27506]]

standard UL 859 to require immersion protection for hand-held hair 
dryers if the dryer switch was in the ``off'' position. During 1987-90, 
a total of 39 such electrocutions (9.75 annual average) were reported. 
In 1991, a revision to the UL standard requiring immersion protection 
in the ``off'' as well as ``on'' position took effect. During 1991-97, 
after the enhanced standard took effect, a total of 12 electrocutions 
(1.71 annual average) were reported and three electrocutions (0.3 
annual average) were reported during 1998-2007, a period when most hair 
dryers made before 1991 were likely to be out of use. Reporting is 
ongoing for the years 2006 and 2007.

D. Voluntary Standards

    Hand-held hair dryers are included in UL 859, Standard for Safety 
for Household Electric Personal Grooming Appliances. In 1985, UL 
revised this standard to require protection against electrocution when 
a hair dryer is plugged into an electrical outlet, with its switch in 
the ``off'' position, and is immersed in water. The requirement took 
effect in October 1987. Between 1987 and 1990, the average number of 
reported deaths from hair dryer immersion/water contact dropped to 
approximately 10 deaths per year.
    In 1990, the National Electrical Code (NEC) (Article 422-24, 1990 
edition) instituted requirements for protection against electrocutions 
from immersion of hair dryers when the switch is in either the ``on'' 
or the ``off'' position.
    In 1987, UL, in keeping with NEC, revised its immersion protection 
standard to require that ``A hand-supported hair-drying appliance (such 
as a hair dryer, blower-styler, heated air comb, heated air hair 
curler, curling iron-hair dryer combination, a wall-hung hair dryer or 
hand unit of a wall-mounted hair dryer, or similar appliance) shall be 
constructed to reduce the risk of electric shock when the appliance is 
energized, with its power switch in either the ``on'' or ``off'' 
position, and immersed in water having an electrically conductive path 
to ground.'' This revision, which took effect January 1, 1991, expanded 
immersion protection to cover the appliance whether the switch was in 
the ``on'' or ``off'' position.
    As discussed in section C of this document, the reported incidents 
of death from immersion-related electrocutions involving hand-held hair 
dryers significantly declined with implementation of immersion 
protection requirements in UL 859. The average number of reported hand-
held hair dryer electrocutions resulting in death is now less than one 
per year.
    UL 1727, Standard for Safety for Commercial Electric Personal 
Grooming Appliances, originally issued in 1986, was revised to include 
the same integral immersion protection as UL 859 after the full 
immersion protection requirements in UL 859 proved to be effective. 
These requirements in UL 1727 became effective March 31, 1994.

E. Recalls

    As noted in section A of this document, in November 2002, the 
director of the Office of Compliance sent a letter to importers and 
manufacturers of hand-held hair dryers indicating the staff's 
expectation that such hair dryers should have immersion protection and 
that the staff would consider them to present a substantial product 
hazard if they did not. There have been numerous recalls of hand-held 
hair dryers due to lack of immersion protection. Since January 1, 1991, 
there have been 30 recalls of hand-held hair dryers due to lack of an 
immersion protection device. Of these, three occurred during the year 
2009.

F. Substantial Compliance

    There is no statutory definition of ``substantial compliance'' in 
either the CPSIA or the CPSA. Legislative history of the CPSA provision 
that is related to issuance of consumer product safety standards 
indicates that substantial compliance should be measured by reference 
to the number of complying products, rather than the number of 
manufacturers of products complying with the standard. H.R. Rep. No. 
208, 97th Cong., 1st Sess. 871 (1981). Legislative history of this CPSA 
rulemaking provision also indicates that there is substantial 
compliance when the unreasonable risk of injury associated with a 
product will be eliminated or adequately reduced ``in a timely 
fashion.'' Id. The Commission has not taken the position that there is 
any particular percentage that differentiates substantial compliance 
from something that is not substantial compliance. Rather than any 
bright line, the Commission has been of the view in the rulemaking 
context that the determination needs to be made on a case-by-case 
basis.
    The staff estimates sales of hand-held hair dryers are about 23 
million units annually. There are 16 suppliers of hand-held hair dryers 
listed in the UL Online Certifications Directory, and an additional 42 
suppliers listed in the Intertek ETL Listed Mark Product Directory as 
supplying hand-held hair dryers compliant with UL 859. Ten firms are 
listed to the UL 1727 standard on UL's Online Certifications Directory 
and another four firms are listed in the Intertek ETL Listed Mark 
Product Directory as being in compliance with UL 1727.
    In 2007, the three largest suppliers listed accounted for 
approximately 92% of domestic hand-held hair dryer sales. As discussed 
above, additional suppliers are also listed as supplying hand-held hair 
dryers that are in compliance with the UL standards. Since the three 
largest suppliers (which are listed as producing hair dryers that 
comply with the UL standards) account for 92% of the domestic sales of 
hand-held hair dryers and additional companies are also listed as 
producing complying hand-held hair dryers, the staff estimates that 
over 95% of hand-held hair dryers for sale in this country comply with 
the UL standards. The Commission, therefore, determines that there is 
substantial compliance with UL 859 and UL 1727.

G. Effect of Section 15(j) Rule

    Section 15(j) of the CPSA allows the Commission to issue a rule 
specifying that a consumer product (or class of consumer products) has 
characteristics whose presence or absence creates a substantial product 
hazard. Placing a consumer product on this substantial product hazard 
list has certain ramifications. A product that is or has a substantial 
product hazard is subject to the reporting requirements of section 
15(b) of the CPSA. 15 U.S.C. 2064(b). A manufacturer who fails to 
report a substantial product hazard to the Commission is subject to 
civil penalties under section 20 of the CPSA and possibly to criminal 
penalties under section 21 of the CPSA. Id. 2069 & 2070.
    A product that is or contains a substantial product hazard is 
subject to corrective action under section 15(c) and (d) of the CPSA. 
Id. 2064(c) & (d). Thus, the Commission can order the manufacturer, 
distributor or retailer of the product to offer to repair or replace 
the product, or to refund the purchase price to the consumer.
    Finally, a product that is offered for import into the United 
States and is or contains a substantial product hazard shall be refused 
admission into the United States under section 17(a) of the CPSA. Id. 
2066(a).

H. Regulatory Flexibility Certification

    The Regulatory Flexibility Act (``RFA'') generally requires that 
agencies review proposed rules for their potential economic impact on 
small entities, including small businesses. 5 U.S.C. 601-612. As noted 
in section B of this

[[Page 27507]]

document above, CPSC has identified 58 suppliers of hand-held hair 
dryers to the U.S. consumer market which provide products listed to the 
UL standard. Three large firms supply approximately 92% of the U.S. 
market share. According to the Small Business Administration Size 
Standards, these three firms are not small businesses. According to the 
UL Online Certifications Directory and the Intertek ETL Listed Mark 
Products Directory, these three firms plus an additional 55 firms are 
UL listed to produce complying hair dryers. All but one of these 55 
firms appears to be a small business. Thus, the overwhelming majority 
of hair dryers sold in the United States are already UL listed. Since 
the majority of businesses (both large and small) are already in 
compliance with the voluntary standard, the proposed rule is not 
expected to pose a significant burden to small business. Therefore, the 
Commission certifies that, in accordance with section 605 of the RFA, 
the rule, if promulgated, will not have a significant economic impact 
on a substantial number of small entities.

I. Environmental Considerations

    A rule determining that hand-held hair dryers without immersion 
protection in accordance with UL 859 or UL 1727 present a substantial 
product hazard is not expected to have an adverse impact on the 
environment and is considered to be a ``categorical exclusion'' for the 
purposes of the National Environmental Policy Act according to the CPSC 
regulations that cover its ``environmental review'' procedures (16 CFR 
1021.5(c)(1)).

J. Paperwork Reduction Act

    This proposed rule would not impose any information collection 
requirements. Accordingly, this rule is not subject to the Paperwork 
Reduction Act, 44 U.S.C. 3501-3520.

K. Effective Date

    The proposed effective date of Part 1120, which declares that any 
held-held hair dryer without immersion protection, as specified in UL 
859 or UL 1727, is a substantial product hazard, is 30 days from 
issuance of any final regulation in the Federal Register. Thus, it 
would apply to hand-held hair dryers imported or introduced into 
commerce 30 days or more after publication of any final rule in the 
Federal Register.

L. Preemption

    The proposed rule would place hand-held hair dryers without 
integral immersion protection on a list of products that present a 
substantial product hazard. The proposed rule does not establish a 
consumer product safety standard. The preemption provisions in section 
26(a) of the CPSA, 15 U.S.C. 2075(a), apply when a consumer product 
safety standard is in effect. Therefore, section 26(a) of the CPSA 
would not apply to this rule.

M. Request for Comments

    The Commission invites interested persons to submit their comments 
to the Commission on any aspect of the proposed rule. Comments should 
be submitted as provided in the instructions in the ADDRESSES section 
at the beginning of this notice.

List of Subjects in 16 CFR Part 1120

    Administrative practice and procedure, Consumer protection, 
Household appliances, Imports, Incorporation by reference.

    Therefore, the Commission proposes to amend Title 16 of the Code of 
Federal Regulations by adding part 1120 to read as follows:

PART 1120--SUBSTANTIAL PRODUCT HAZARD LIST

Sec.
1120.1 Authority
1120.2 Definitions
1120.3 Substantial product hazard list

    Authority: 15 U.S.C. 2064(j).


Sec.  1120.1  Authority.

    Under the authority of section 15(j) of the Consumer Product Safety 
Act (CPSA), the Commission determines that consumer products or classes 
of consumer products listed in Sec.  1120.3 have characteristics whose 
existence or absence presents a substantial product hazard under 
section 15(a)(2) of the CPSA. The Commission has determined that the 
listed products have characteristics that are readily observable and 
have been addressed by a voluntary standard, that the voluntary 
standard has been effective, and that there is substantial compliance 
with the voluntary standard. The listed products are subject to the 
reporting requirements of section 15(b) of the CPSA and to the recall 
provisions of section 15(c) and (d) of the CPSA, and shall be refused 
entry into the United States under section 17(a)(4) of the CPSA.


Sec.  1120.2  Definitions.

    The definitions in section 3 of the Consumer Product Safety Act (15 
U.S.C. 2052) apply to this part 1120.
    (a) Substantial product hazard means a product defect which 
(because of the pattern of defect, the number of defective products 
distributed in commerce, the severity of the risk, or otherwise) 
creates a substantial risk of injury to the public.
    (b) Hand-held hair dryer means an electrical appliance, intended to 
be held with one hand during use, which creates a flow of air over or 
through a self-contained heating element for the purpose of drying 
hair.


Sec.  1120.3  Substantial product hazard list.

    The following products or class of products shall be deemed to be 
substantial product hazards under section 15(a)(2) of the CPSA.
    (a) Hand-held hair dryers that do not provide integral immersion 
protection in compliance with the requirements of section 5 of 
Underwriters Laboratories (UL) Standard for Safety for Household 
Electric Personal Grooming Appliances, UL 859-2007, 10th Edition, 
approved March 21, 2007, or section 6 of UL Standard for Safety for 
Commercial Electric Personal Grooming Appliances, UL 1727, 4th Edition, 
approved March 25, 1999. The Director of the Federal Register approves 
these incorporations by reference in accordance with 5 U.S.C. 552(a) 
and 1 CFR part 51. You may obtain a copy from UL, Inc., 333 Pfingsten 
Road, Northbrook, IL 60062. You may inspect a copy at the Office of the 
Secretary, U.S. Consumer Product Safety Commission, Room 502, 4330 East 
West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the 
National Archives and Records Administration (NARA). For information on 
the availability of this material at NARA, call 202-741-6030, or go to: 
https://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
    (b) [Reserved]

    Dated: May 11, 2010.
Todd Stevenson,
Secretary, U.S. Consumer Product Safety Commission.
[FR Doc. 2010-11624 Filed 5-14-10; 8:45 am]
BILLING CODE 6355-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.