Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 22554-22555 [2010-9948]

Download as PDF 22554 Federal Register / Vol. 75, No. 82 / Thursday, April 29, 2010 / Notices with respect to technical questions that affect the level of export controls applicable to materials and related technology. Agenda Open Session 1. Opening Remarks and Introduction. 2. Remarks from the Bureau of Industry and Security Management. 3. Discussion on USG’s 2009 Confidence Building Measures (CBMs) Submitted to the Biological and Toxin Weapon Convention (BWC). 4. Presentation on Composite for Biological Agents and Processing Equipment. 5. Report on Composite Working Group and Export Control Classification Number (ECCN) Review Subgroup. 6. Report on Recent Commerce Control List Changes Published in the Federal Register. 7. New Business. 8. Public Comments. Closed Session 9. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yspringer@bis.doc.gov no later than May 6, 2010. A limited number of seats will be available during the public session of the meeting. Reservations are not accepted. To the extent time permits, members of the public may present oral statements to the Committee. Written statements may be submitted at any time before or after the meeting. However, to facilitate distribution of public presentation materials to Committee members, the materials should be forwarded prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on December 18, 2009, pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended, that the portion of the meeting dealing with matters the premature disclosure of which would likely frustrate the implementation of a proposed agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202) 482–2813. Dated: April 26, 2010. Yvette Springer, Committee Liaison Officer. [FR Doc. 2010–10027 Filed 4–28–10; 8:45 am] BILLING CODE 3510–JT–P DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance AGENCY: Economic Development Administration, Department of Commerce. ACTION: Notice and opportunity for public comment. Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT MARCH 31, 2010 THROUGH APRIL 22, 2010 Date accepted for filing Address Crustbuster/Speed King, Inc ................... 2300 E. Trail Street, P.O. Box 1438, Dodge City, KS 67801. 4/2/2010 Bradford Clocks, Limited ......................... 1080 Hudson 18255. PA 4/9/2010 Permanent Magnet Co., Inc .................... 4437 Bragdon St., Indianapolis, IN 46226. 800 West Ninth Street, Little Rock, AR 72201. 4/9/2010 Arkansas Flag & Banner, Inc .................. 4/12/2010 Able Manufacturing & Assembly, LLC .... mstockstill on DSKH9S0YB1PROD with NOTICES Firm 1000 Schifferdecker Ave, Joplin, MO 68801. 4/13/2010 The Craft-Art Company, Inc .................... 1209 Logan Circle NW., Atlanta, GA 30318. 4/13/2010 KMS Fab, LLC ......................................... 100 Parry Street, Luzerne, PA 18709 ..... 4/14/2010 Zenith Engraving Company, Inc .............. 731 Wilson Street, Chester, SC 29706 ... 4/14/2010 VerDate Mar<15>2010 16:19 Apr 28, 2010 Jkt 220001 PO 00000 Drive, Frm 00005 Weatherly, Fmt 4703 Sfmt 4703 E:\FR\FM\29APN1.SGM Products Grain Drills, Cotton Harvesting, Seed Handling, Grain Carts and Industrial Agricultural Equipment. Manufactures wooden clocks, human and pet cremation urns and flag cases. Alnico magnets for industrial use. Manufacture custom products such as flags, banners, table coverings, accessories, etc. that are woven, embroidered, knitted, crocheted, etc. and otherwise processed (e.g. printing). Specialty truck cabs, hoods, etc.; construction and military cabs, hoods, etc.; Water cooling tower parts; Passenger train bonnets; Wind energy parts; Misc. Plastic Parts. The firm produces custom wood counter, table, and vanity tops. Primary material is wood. Manufactures precision sheet metal fabrications ranging from prototype to large production runs. The firm produces screens for rotary screen textile printing; primary manufacturing material is nickel. 29APN1 22555 Federal Register / Vol. 75, No. 82 / Thursday, April 29, 2010 / Notices LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT MARCH 31, 2010 THROUGH APRIL 22, 2010—Continued Date accepted for filing Firm Address Fort Worth Aluminum Foundry, Inc ......... 2708 North Nichols, Fort Worth, TX 76106. P.O. Box 622188, Oviedo, FL 32762 ...... NCAD Products, Inc ................................ Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Trade Adjustment Assistance for Firms Division, Room 7106, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance. Dated: April 22, 2010. Bryan Borlik, Program Director. [FR Doc. 2010–9948 Filed 4–28–10; 8:45 am] BILLING CODE 3510–24–P DEPARTMENT OF COMMERCE International Trade Administration [A–580–836] mstockstill on DSKH9S0YB1PROD with NOTICES Certain Cut–to-Length Carbon–Quality Steel Plate from the Republic of Korea: Rescission of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On March 30, 2010, in response to requests from interested parties, the Department of Commerce (the Department) published a notice of initiation of the administrative review of the antidumping duty order on certain cut–to-length carbon–quality steel plate (CTL plate) from the Republic of Korea. The period of review is February 1, 2009, through January 31, 2010. The Department is rescinding this review. EFFECTIVE DATE: April 29, 2010. FOR FURTHER INFORMATION CONTACT: Yang Jin Chun, AD/CVD Operations, Office 5, Import Administration, International Trade Administration, VerDate Mar<15>2010 16:19 Apr 28, 2010 Jkt 220001 4/16/2010 4/16/2010 U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482–5760. SUPPLEMENTARY INFORMATION: Background On March 30, 2010, in response to requests from interested parties, the Department initiated an administrative review of the antidumping duty order on CTL plate from the Republic of Korea for the period February 1, 2009, through January 31, 2010. See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for Revocation in Part, 75 FR 15679, 15681 (March 30, 2010) (Initiation Notice). The two companies identified in the Initiation Notice for review were Dongkuk Steel Mill Co., Ltd. (DSM), and Hyosung Corporation (Hyosung). On March 31, 2010, DSM withdrew its request for review of its sales of merchandise subject to the order. On April 1, 2010, Hyosung withdrew its request for review of its sales of subject merchandise. Rescission of Review In accordance with 19 CFR 351.213(d)(1), the Department will rescind an administrative review ‘‘if a party that requested the review withdraws the request within 90 days of the date of publication of notice of initiation of the requested review.’’ We received letters withdrawing the requests for review of DSM and Hyosung within the 90–day time limit. We received no other requests for review of these companies. In accordance with 19 CFR 351.213(d)(1), the Department is rescinding the review with respect to CTL plate from the Republic of Korea produced and/or exported by these two companies. The Department will issue appropriate assessment instructions to U.S. Customs and Border Protection 15 days after publication of this notice. Notification to Importer This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 Products Manufacturer of Custom cast aluminum for heavy industry pressure leaf filters. The firm produces industrial, commercial and medical goods. Primary materials include steel and plastic. certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department’s presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties. This notice is published in accordance with section 777(i)(1) of the Tariff Act of 1930, as amended, and 19 CFR 351.213(d)(4). Dated: April 23, 2010. Edward C. Yang, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. [FR Doc. 2010–10019 Filed 4–28–10; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF DEFENSE Office of the Secretary [Docket No. DOD–2009–HA–0155] Submission for OMB Review; Comment Request ACTION: Notice. The Department of Defense has submitted to OMB for clearance, the following proposal for collection of information under the provisions of the Paperwork Reduction Act (44 U.S.C. Chapter 35). DATES: Consideration will be given to all comments received by June 1, 2010. Title and OMB Number: Retention of Behavioral Health Providers Survey and Focus Groups; OMB Control Number 0720–TBD. Type of Request: New. Number of Respondents: 800. Responses per Respondent: 1. Annual Responses: 800. Average Burden per Response: 15 minutes. Annual Burden Hours: 200 hours. Needs and Uses: The Force Health Protection and Readiness (FHP&R) program has hired Lockheed Martin to E:\FR\FM\29APN1.SGM 29APN1

Agencies

[Federal Register Volume 75, Number 82 (Thursday, April 29, 2010)]
[Notices]
[Pages 22554-22555]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-9948]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and opportunity for public comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et 
seq.), the Economic Development Administration (EDA) has received 
petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. EDA has initiated 
separate investigations to determine whether increased imports into the 
United States of articles like or directly competitive with those 
produced by each firm contributed importantly to the total or partial 
separation of the firm's workers, or threat thereof, and to a decrease 
in sales or production of each petitioning firm.

 List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment March 31, 2010
                                             Through April 22, 2010
----------------------------------------------------------------------------------------------------------------
                                                                       Date accepted
                  Firm                              Address             for filing             Products
----------------------------------------------------------------------------------------------------------------
Crustbuster/Speed King, Inc.............  2300 E. Trail Street, P.O.        4/2/2010  Grain Drills, Cotton
                                           Box 1438, Dodge City, KS                    Harvesting, Seed
                                           67801.                                      Handling, Grain Carts and
                                                                                       Industrial Agricultural
                                                                                       Equipment.
Bradford Clocks, Limited................  1080 Hudson Drive,                4/9/2010  Manufactures wooden
                                           Weatherly, PA 18255.                        clocks, human and pet
                                                                                       cremation urns and flag
                                                                                       cases.
Permanent Magnet Co., Inc...............  4437 Bragdon St.,                 4/9/2010  Alnico magnets for
                                           Indianapolis, IN 46226.                     industrial use.
Arkansas Flag & Banner, Inc.............  800 West Ninth Street,           4/12/2010  Manufacture custom
                                           Little Rock, AR 72201.                      products such as flags,
                                                                                       banners, table coverings,
                                                                                       accessories, etc. that
                                                                                       are woven, embroidered,
                                                                                       knitted, crocheted, etc.
                                                                                       and otherwise processed
                                                                                       (e.g. printing).
Able Manufacturing & Assembly, LLC......  1000 Schifferdecker Ave,         4/13/2010  Specialty truck cabs,
                                           Joplin, MO 68801.                           hoods, etc.; construction
                                                                                       and military cabs, hoods,
                                                                                       etc.; Water cooling tower
                                                                                       parts; Passenger train
                                                                                       bonnets; Wind energy
                                                                                       parts; Misc. Plastic
                                                                                       Parts.
The Craft-Art Company, Inc..............  1209 Logan Circle NW.,           4/13/2010  The firm produces custom
                                           Atlanta, GA 30318.                          wood counter, table, and
                                                                                       vanity tops. Primary
                                                                                       material is wood.
KMS Fab, LLC............................  100 Parry Street, Luzerne,       4/14/2010  Manufactures precision
                                           PA 18709.                                   sheet metal fabrications
                                                                                       ranging from prototype to
                                                                                       large production runs.
Zenith Engraving Company, Inc...........  731 Wilson Street,               4/14/2010  The firm produces screens
                                           Chester, SC 29706.                          for rotary screen textile
                                                                                       printing; primary
                                                                                       manufacturing material is
                                                                                       nickel.

[[Page 22555]]

 
Fort Worth Aluminum Foundry, Inc........  2708 North Nichols, Fort         4/16/2010  Manufacturer of Custom
                                           Worth, TX 76106.                            cast aluminum for heavy
                                                                                       industry pressure leaf
                                                                                       filters.
NCAD Products, Inc......................  P.O. Box 622188, Oviedo,         4/16/2010  The firm produces
                                           FL 32762.                                   industrial, commercial
                                                                                       and medical goods.
                                                                                       Primary materials include
                                                                                       steel and plastic.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter.
    A written request for a hearing must be submitted to the Trade 
Adjustment Assistance for Firms Division, Room 7106, Economic 
Development Administration, U.S. Department of Commerce, Washington, DC 
20230, no later than ten (10) calendar days following publication of 
this notice.
    Please follow the procedures set forth in Section 315.9 of EDA's 
final rule (71 FR 56704) for procedures for requesting a public 
hearing. The Catalog of Federal Domestic Assistance official program 
number and title of the program under which these petitions are 
submitted is 11.313, Trade Adjustment Assistance.

    Dated: April 22, 2010.
Bryan Borlik,
Program Director.
[FR Doc. 2010-9948 Filed 4-28-10; 8:45 am]
BILLING CODE 3510-24-P