Notice of Issuance of Regulatory Guide, 20399 [2010-8922]

Download as PDF Federal Register / Vol. 75, No. 74 / Monday, April 19, 2010 / Notices Dated: April 8, 2010. Antonio F. Dias, Chief, Reactor Safety Branch B, Advisory Committee on Reactor Safeguards. II. Further Information [FR Doc. 2010–8916 Filed 4–16–10; 8:45 am] BILLING CODE 7590–01–P NUCLEAR REGULATORY COMMISSION [NRC–2009–0418] Notice of Issuance of Regulatory Guide AGENCY: Nuclear Regulatory Commission. ACTION: Notice of Issuance and Availability of Regulatory Guide 6.9, Revision 1, ‘‘Establishing Quality Assurance Programs for the Manufacture and Distribution of Sealed Sources and Devices Containing Byproduct Material.’’ FOR FURTHER INFORMATION CONTACT: Jack W. Foster, Licensing Branch, Licensing and Inspection Support Directorate, Division of Materials Safety and State Agreement, Office of Federal and State Materials and Environmental Management Programs, U.S. Nuclear Regulatory Commission, Washington, DC 20555–0001, telephone (301) 415– 6250 or e-mail Jack.Foster@nrc.gov. In September 2009, DG–6007 was published with a public comment period of 60 days from the issuance of the guide. No comments were received and the public comment period closed on November 21, 2009. Electronic copies of Regulatory Guide 6.9, Revision 1 are available through the NRC’s public Web site under ‘‘Regulatory Guides’’ at https://www.nrc.gov/reading-rm/doccollections/. In addition, regulatory guides are available for inspection at the NRC’s Public Document Room (PDR) located at 11555 Rockville Pike, Rockville, Maryland. The PDR’s mailing address is USNRC PDR, Washington, DC 20555– 0001. The PDR can also be reached by telephone at (301) 415–4737 or (800) 397–4205, by fax at (301) 415–3548, and by e-mail to pdr.resource@nrc.gov. Regulatory guides are not copyrighted, and NRC approval is not required to reproduce them. Dated at Rockville, Maryland, this 12th day of April 2010. For the Nuclear Regulatory Commission. Andrea D. Valentin, Chief, Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010–8922 Filed 4–16–10; 8:45 am] BILLING CODE 7590–01–P SUPPLEMENTARY INFORMATION: OFFICE OF PERSONNEL MANAGEMENT wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1 I. Introduction The U.S. Nuclear Regulatory Commission (NRC) is issuing a revision to an existing guide in the agency’s ‘‘Regulatory Guide’’ series. This series was developed to describe and make available to the public information such as methods that are acceptable to the NRC staff for implementing specific parts of the agency’s regulations, techniques that the staff uses in evaluating specific problems or postulated accidents, and data that the staff needs in its review of applications for permits and licenses. Revision 1 of Regulatory Guide 6.9, ‘‘Establishing Quality Assurance Programs for the Manufacture and Distribution of Sealed Sources and Devices Containing Byproduct Material,’’ was issued with a temporary identification as Draft Regulatory Guide, DG–6007. This regulatory guide directs the reader to the type of quality assurance (QA) and quality control (QC) program acceptable to the staff of the NRC during the review of an application to manufacture or distribute sealed sources and devices containing byproduct materials. VerDate Nov<24>2008 15:04 Apr 16, 2010 Jkt 220001 Submission for Review: Declaration for Federal Employment, OF 306, 3206– 0182 U.S. Office of Personnel Management. ACTION: 60-Day Notice and request for comments. AGENCY: SUMMARY: Federal Investigative Services (FIS), U.S. Office of Personnel Management (OPM) offers the general public and other Federal agencies the opportunity to comment on an expiring information collection request (ICR), Office of Management and Budget (OMB) Control No. 3206–0182, for the Declaration for Federal Employment, Optional Form (OF) 306. As required by the Paperwork Reduction Act of 1995, (Pub. L. 104–13, 44 U.S.C. chapter 35) as amended by the Clinger-Cohen Act (Pub. L. 104–106), OPM is soliciting comments for this collection. The Office of Management and Budget (OMB) is particularly interested in comments that: 1. Evaluate whether the proposed collection of information is necessary PO 00000 Frm 00075 Fmt 4703 Sfmt 9990 20399 for the proper performance of the functions of the agency, including whether the information will have practical utility; 2. Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; 3. Enhance the quality, utility, and clarity of the information to be collected; and 4. Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submissions of responses. DATES: Comments are encouraged and will be accepted until June 18, 2010. This process is conducted in accordance with 5 CFR 1320.1. ADDRESSES: Interested persons are invited to submit written comments on the proposed information collection to FIS, OPM, 1900 E Street, NW., Washington, DC 20415, Attention: Lisa Loss or sent via electronic mail to FISDFormsComments@opm.gov. FOR FURTHER INFORMATION CONTACT: A copy of this ICR, with applicable supporting documentation, may be obtained by contacting FIS, OPM, 1900 E Street, NW., Washington, DC 20503, Attention: Lisa Loss or sent via electronic mail to FISDFormsComments@opm.gov. The Declaration for Federal Employment Optional Form (OF) 306, is completed by applicants who are under consideration for Federal or Federal contract employment. The OF 306 requests that the applicant provide personal identifying data, including convictions, imprisonments, probations, paroles or military court martial in the past 10 years, delinquency on a Federal debt, Selective Service Registration, United States military service and Federal civilian or military retirement pay or pension received or applied for. It is estimated that 178,114 individuals will respond annually. Each form takes approximately 15 minutes to complete. The annual estimated burden is 44,529 hours. SUPPLEMENTARY INFORMATION: U.S. Office of Personnel Management. John Berry, Director. [FR Doc. 2010–8955 Filed 4–16–10; 8:45 am] BILLING CODE 6325–53–P E:\FR\FM\19APN1.SGM 19APN1

Agencies

[Federal Register Volume 75, Number 74 (Monday, April 19, 2010)]
[Notices]
[Page 20399]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-8922]


-----------------------------------------------------------------------

NUCLEAR REGULATORY COMMISSION

[NRC-2009-0418]


Notice of Issuance of Regulatory Guide

AGENCY: Nuclear Regulatory Commission.

ACTION: Notice of Issuance and Availability of Regulatory Guide 6.9, 
Revision 1, ``Establishing Quality Assurance Programs for the 
Manufacture and Distribution of Sealed Sources and Devices Containing 
Byproduct Material.''

-----------------------------------------------------------------------

FOR FURTHER INFORMATION CONTACT: Jack W. Foster, Licensing Branch, 
Licensing and Inspection Support Directorate, Division of Materials 
Safety and State Agreement, Office of Federal and State Materials and 
Environmental Management Programs, U.S. Nuclear Regulatory Commission, 
Washington, DC 20555-0001, telephone (301) 415-6250 or e-mail 
Jack.Foster@nrc.gov.

SUPPLEMENTARY INFORMATION: 

I. Introduction

    The U.S. Nuclear Regulatory Commission (NRC) is issuing a revision 
to an existing guide in the agency's ``Regulatory Guide'' series. This 
series was developed to describe and make available to the public 
information such as methods that are acceptable to the NRC staff for 
implementing specific parts of the agency's regulations, techniques 
that the staff uses in evaluating specific problems or postulated 
accidents, and data that the staff needs in its review of applications 
for permits and licenses.
    Revision 1 of Regulatory Guide 6.9, ``Establishing Quality 
Assurance Programs for the Manufacture and Distribution of Sealed 
Sources and Devices Containing Byproduct Material,'' was issued with a 
temporary identification as Draft Regulatory Guide, DG-6007. This 
regulatory guide directs the reader to the type of quality assurance 
(QA) and quality control (QC) program acceptable to the staff of the 
NRC during the review of an application to manufacture or distribute 
sealed sources and devices containing byproduct materials.

II. Further Information

    In September 2009, DG-6007 was published with a public comment 
period of 60 days from the issuance of the guide. No comments were 
received and the public comment period closed on November 21, 2009. 
Electronic copies of Regulatory Guide 6.9, Revision 1 are available 
through the NRC's public Web site under ``Regulatory Guides'' at https://www.nrc.gov/reading-rm/doc-collections/.
    In addition, regulatory guides are available for inspection at the 
NRC's Public Document Room (PDR) located at 11555 Rockville Pike, 
Rockville, Maryland. The PDR's mailing address is USNRC PDR, 
Washington, DC 20555-0001. The PDR can also be reached by telephone at 
(301) 415-4737 or (800) 397-4205, by fax at (301) 415-3548, and by e-
mail to pdr.resource@nrc.gov.
    Regulatory guides are not copyrighted, and NRC approval is not 
required to reproduce them.

    Dated at Rockville, Maryland, this 12th day of April 2010.

    For the Nuclear Regulatory Commission.
Andrea D. Valentin,
Chief, Regulatory Guide Development Branch, Division of Engineering, 
Office of Nuclear Regulatory Research.
[FR Doc. 2010-8922 Filed 4-16-10; 8:45 am]
BILLING CODE 7590-01-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.