Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Plastic Parts and Products Surface Coating (Renewal), EPA ICR Number 2044.04, OMB Control Number 2060-0537, 16458-16459 [2010-7316]

Download as PDF mstockstill on DSKH9S0YB1PROD with NOTICES 16458 Federal Register / Vol. 75, No. 62 / Thursday, April 1, 2010 / Notices review and approval according to the procedures prescribed in 5 CFR 1320.12. On July 30, 2009 (74 FR 38005), EPA sought comments on this ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional comments on this ICR should be submitted to EPA and OMB within 30 days of this notice. EPA has established a public docket for this ICR under docket ID number EPA–HQ–OECA–2009–0530, which is available for public viewing online at https://www.regulations.gov, in person viewing at the Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC), EPA West, Room 3334, 1301 Constitution Avenue, NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566–1744, and the telephone number for the Enforcement and Compliance Docket is (202) 566–1752. Use EPA’s electronic docket and comment system at https:// www.regulations.gov, to submit or view public comments, access the index listing of the contents of the docket, and to access those documents in the docket that are available electronically. Once in the system, select ‘‘docket search,’’ then key in the docket ID number identified above. Please note that EPA’s policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing at https://www.regulations.gov, as EPA receives them and without change, unless the comment contains copyrighted material, Confidential Business Information (CBI), or other information whose public disclosure is restricted by statute. For further information about the electronic docket, go to https://www.regulations.gov. Title: NSPS for Wool Fiberglass Insulation Manufacturing Plants and NESHAP for Wool Fiberglass Manufacturing (Renewal). ICR Numbers: EPA ICR Number 1160.09, OMB Control Number 2060– 0114. ICR Status: This ICR is scheduled to expire on May 31, 2010. Under OMB regulations, the Agency may continue to conduct or sponsor the collection of information while this submission is pending at OMB. An Agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The OMB control numbers for the EPA regulations in title 40 of the CFR, after appearing in the Federal Register when approved, are listed in 40 CFR part 9, VerDate Nov<24>2008 16:51 Mar 31, 2010 Jkt 220001 and displayed either by publication in the Federal Register or by other appropriate means, such as on the related collection instrument or form, if applicable. The display of OMB control numbers in certain EPA regulations is consolidated in 40 CFR part 9. Abstract: The NSPS for Wool Fiberglass Insulation Manufacturing Plants, published at 40 CFR part 60, subpart PPP, were proposed on February 7, 1984 and promulgated on February 25, 1985, and the NESHAP for Wool Fiberglass Manufacturing, published at 40 CFR part 63, subpart NNN, were proposed on March 31, 1997 and promulgated on June 14, 1999. Owners or operators of the affected facilities must make an initial notification, performance tests, periodic reports, and maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Reports, at a minimum, are required semiannually. Burden Statement: The annual public reporting and recordkeeping burden for this collection of information is estimated to average 103 hours per response. Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously applicable instructions and requirements which have subsequently changed; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information. Respondents/Affected Entities: Wool fiberglass insulation manufacturing plants. Estimated Number of Respondents: 61. Frequency of Response: Initially, occasionally, and semiannually. Estimated Total Annual Hour Burden: 18,599. Estimated Total Annual Cost: $2,233,940, which includes $1,745,440 in labor costs, no capital/startup costs, and $488,500 in operation and maintenance (O&M) costs. Changes in the Estimates: There is a small increase in the total labor hours for this ICR, due to an adjustment. The PO 00000 Frm 00037 Fmt 4703 Sfmt 4703 previous ICR did not include managerial and clerical hours for 40 CFR part 60, subpart PPP. This adjustment also results in a slight increase in the per respondent labor hours, from 101 to 103 hours per response. Although these adjustments resulted in an increase in calculated burden hours, the regulations have not changed over the past three years and are not anticipated to change over the next three years. Additionally, the growth rate for the respondents is very low, negative or non-existent. There is an increase in both respondent and Agency costs resulting from labor rate increases. This ICR has been updated to present the most recent available labor rates. Dated: March 26, 2010. John Moses, Director, Collection Strategies Division. [FR Doc. 2010–7315 Filed 3–31–10; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2009–0402; FRL–9132–6] Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Plastic Parts and Products Surface Coating (Renewal), EPA ICR Number 2044.04, OMB Control Number 2060–0537 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.), this document announces that an Information Collection Request (ICR) has been forwarded to the Office of Management and Budget (OMB) for review and approval. This is a request to renew an existing approved collection. The ICR which is abstracted below describes the nature of the collection and the estimated burden and cost. DATES: Additional comments may be submitted on or before May 3, 2010. ADDRESSES: Submit your comments, referencing docket ID number EPA–HQ– OECA–2009–0402, to (1) EPA online using https://www.regulations.gov (our preferred method), or by e-mail to docket.oeca@epa.gov, or by mail to: EPA Docket Center (EPA/DC), Environmental Protection Agency, Enforcement and Compliance Docket and Information Center, mail code 28221T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) OMB at: E:\FR\FM\01APN1.SGM 01APN1 Federal Register / Vol. 75, No. 62 / Thursday, April 1, 2010 / Notices Office of Information and Regulatory Affairs, Office of Management and Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street, NW., Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Robert C. Marshall, Jr., Office of Compliance, Mail Code: 2223A, Environmental Protection Agency, 1200 Pennsylvania Avenue, NW., Washington, DC 20460; telephone number: (202) 564–7021; fax number: (202) 564–0050; e-mail address: marshall.robert@epa.gov. EPA has submitted the following ICR to OMB for review and approval according to the procedures prescribed in 5 CFR 1320.12. On July 8, 2009 (74 FR 32580), EPA sought comments on this ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional comments on this ICR should be submitted to EPA and OMB within 30 days of this notice. EPA has established a public docket for this ICR under docket ID number EPA–HQ–OECA–2009–0402, which is available for public viewing online at https://www.regulations.gov, in person viewing at the Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC), EPA West, Room 3334, 1301 Constitution Avenue, NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566–1744, and the telephone number for the Enforcement and Compliance Docket is (202) 566–1752. Use EPA’s electronic docket and comment system at https:// www.regulations.gov, to submit or view public comments, access the index listing of the contents of the docket, and to access those documents in the docket that are available electronically. Once in the system, select ‘‘docket search,’’ then key in the docket ID number identified above. Please note that EPA’s policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing at https://www.regulations.gov, as EPA receives them and without change, unless the comment contains copyrighted material, Confidential Business Information (CBI), or other information whose public disclosure is restricted by statute. For further information about the electronic docket, go to https://www.regulations.gov. Title: NESHAP for Plastic Parts and Products Surface Coating (Renewal). mstockstill on DSKH9S0YB1PROD with NOTICES SUPPLEMENTARY INFORMATION: VerDate Nov<24>2008 16:51 Mar 31, 2010 Jkt 220001 ICR Numbers: EPA ICR Number 2044.04, OMB Control Number 2060– 0537. ICR Status: This ICR is scheduled to expire on April 30, 2010. Under OMB regulations, the Agency may continue to conduct or sponsor the collection of information while this submission is pending at OMB. An Agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The OMB control numbers for EPA’s regulations in title 40 of the CFR, after appearing in the Federal Register when approved, are listed in 40 CFR part 9, and displayed either by publication in the Federal Register or by other appropriate means, such as on the related collection instrument or form, if applicable. The display of OMB control numbers in certain EPA regulations is consolidated in 40 CFR part 9. Abstract: Entities potentially affected by this action are the owners or operators of plastic parts and products surface coating facilities. The affected entities are subject to the General Provisions of the NESHAP at 40 CFR part 63, subpart A, and any changes, or additions to the Provisions specified at 40 CFR part 63, subpart PPPP. Owners or operators of the affected facilities must submit a one-time-only report of any physical or operational changes, initial performance tests, and periodic reports and results. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Reports, at a minimum, are required semiannually. Burden Statement: The annual public reporting and recordkeeping burden for this collection of information is estimated to average 91 hours per response. Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously applicable instructions and requirements which have subsequently changed; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; PO 00000 Frm 00038 Fmt 4703 Sfmt 4703 16459 and transmit or otherwise disclose the information. Respondents/Affected Entities: Plastic parts and products surface coating facilities. Estimated Number of Respondents: 828. Frequency of Response: Initially, occasionally, and semiannually. Estimated Total Annual Hour Burden: 320,917. Estimated Total Annual Cost: $27,444,633, which includes $27,180,233 in labor costs, $16,000 in capital/startup costs, and $248,400 in operation and maintenance (O&M) costs. Changes in the Estimates: There is a small decrease in the total estimated burden currently identified in the OMB Inventory of Approved ICR Burdens. This change in burden from the most recently approved ICR is due to an adjustment. Minor calculation errors in the previous ICR were corrected. Dated: March 22, 2010. John Moses, Director, Collection Strategies Division. [FR Doc. 2010–7316 Filed 3–31–10; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OAR–2007–0492; FRL–9132–8] Draft Document Related to the Review of the National Ambient Air Quality Standards for Particulate Matter AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Extension of Comment Period. SUMMARY: The EPA is announcing an extension of the public comment period for a draft assessment document titled, Policy Assessment for the Review of the Particulate Matter National Ambient Air Quality Standards—First External Review Draft (75 FR 4067; January 26, 2010). The EPA is extending the comment period that originally was scheduled to end on April 12, 2010. The extended comment period will close on April 26, 2010. The EPA recognizes that this document was released for public comment nine days later than originally anticipated. As a result, the Agency is extending the comment period by two weeks to provide stakeholders and the public with adequate time to conduct appropriate analysis and prepare meaningful comments. DATES: Comments on the above report must be received on or before April 26, 2010. E:\FR\FM\01APN1.SGM 01APN1

Agencies

[Federal Register Volume 75, Number 62 (Thursday, April 1, 2010)]
[Notices]
[Pages 16458-16459]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-7316]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2009-0402; FRL-9132-6]


Agency Information Collection Activities; Submission to OMB for 
Review and Approval; Comment Request; NESHAP for Plastic Parts and 
Products Surface Coating (Renewal), EPA ICR Number 2044.04, OMB Control 
Number 2060-0537

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 
et seq.), this document announces that an Information Collection 
Request (ICR) has been forwarded to the Office of Management and Budget 
(OMB) for review and approval. This is a request to renew an existing 
approved collection. The ICR which is abstracted below describes the 
nature of the collection and the estimated burden and cost.

DATES: Additional comments may be submitted on or before May 3, 2010.

ADDRESSES: Submit your comments, referencing docket ID number EPA-HQ-
OECA-2009-0402, to (1) EPA online using https://www.regulations.gov (our 
preferred method), or by e-mail to docket.oeca@epa.gov, or by mail to: 
EPA Docket Center (EPA/DC), Environmental Protection Agency, 
Enforcement and Compliance Docket and Information Center, mail code 
28221T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) 
OMB at:

[[Page 16459]]

Office of Information and Regulatory Affairs, Office of Management and 
Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street, NW., 
Washington, DC 20503.

FOR FURTHER INFORMATION CONTACT: Robert C. Marshall, Jr., Office of 
Compliance, Mail Code: 2223A, Environmental Protection Agency, 1200 
Pennsylvania Avenue, NW., Washington, DC 20460; telephone number: (202) 
564-7021; fax number: (202) 564-0050; e-mail address: 
marshall.robert@epa.gov.

SUPPLEMENTARY INFORMATION: EPA has submitted the following ICR to OMB 
for review and approval according to the procedures prescribed in 5 CFR 
1320.12. On July 8, 2009 (74 FR 32580), EPA sought comments on this ICR 
pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional 
comments on this ICR should be submitted to EPA and OMB within 30 days 
of this notice.
    EPA has established a public docket for this ICR under docket ID 
number EPA-HQ-OECA-2009-0402, which is available for public viewing 
online at https://www.regulations.gov, in person viewing at the 
Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC), 
EPA West, Room 3334, 1301 Constitution Avenue, NW., Washington, DC. The 
EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 
p.m., Monday through Friday, excluding legal holidays. The telephone 
number for the Reading Room is (202) 566-1744, and the telephone number 
for the Enforcement and Compliance Docket is (202) 566-1752.
    Use EPA's electronic docket and comment system at https://www.regulations.gov, to submit or view public comments, access the 
index listing of the contents of the docket, and to access those 
documents in the docket that are available electronically. Once in the 
system, select ``docket search,'' then key in the docket ID number 
identified above. Please note that EPA's policy is that public 
comments, whether submitted electronically or in paper, will be made 
available for public viewing at https://www.regulations.gov, as EPA 
receives them and without change, unless the comment contains 
copyrighted material, Confidential Business Information (CBI), or other 
information whose public disclosure is restricted by statute. For 
further information about the electronic docket, go to https://www.regulations.gov.
    Title: NESHAP for Plastic Parts and Products Surface Coating 
(Renewal).
    ICR Numbers: EPA ICR Number 2044.04, OMB Control Number 2060-0537.
    ICR Status: This ICR is scheduled to expire on April 30, 2010. 
Under OMB regulations, the Agency may continue to conduct or sponsor 
the collection of information while this submission is pending at OMB. 
An Agency may not conduct or sponsor, and a person is not required to 
respond to, a collection of information unless it displays a currently 
valid OMB control number. The OMB control numbers for EPA's regulations 
in title 40 of the CFR, after appearing in the Federal Register when 
approved, are listed in 40 CFR part 9, and displayed either by 
publication in the Federal Register or by other appropriate means, such 
as on the related collection instrument or form, if applicable. The 
display of OMB control numbers in certain EPA regulations is 
consolidated in 40 CFR part 9.
    Abstract: Entities potentially affected by this action are the 
owners or operators of plastic parts and products surface coating 
facilities. The affected entities are subject to the General Provisions 
of the NESHAP at 40 CFR part 63, subpart A, and any changes, or 
additions to the Provisions specified at 40 CFR part 63, subpart PPPP. 
Owners or operators of the affected facilities must submit a one-time-
only report of any physical or operational changes, initial performance 
tests, and periodic reports and results. Owners or operators are also 
required to maintain records of the occurrence and duration of any 
startup, shutdown, or malfunction in the operation of an affected 
facility, or any period during which the monitoring system is 
inoperative. Reports, at a minimum, are required semiannually.
    Burden Statement: The annual public reporting and recordkeeping 
burden for this collection of information is estimated to average 91 
hours per response. Burden means the total time, effort, or financial 
resources expended by persons to generate, maintain, retain, or 
disclose or provide information to or for a Federal agency. This 
includes the time needed to review instructions; develop, acquire, 
install, and utilize technology and systems for the purposes of 
collecting, validating, and verifying information, processing and 
maintaining information, and disclosing and providing information; 
adjust the existing ways to comply with any previously applicable 
instructions and requirements which have subsequently changed; train 
personnel to be able to respond to a collection of information; search 
data sources; complete and review the collection of information; and 
transmit or otherwise disclose the information.
    Respondents/Affected Entities: Plastic parts and products surface 
coating facilities.
    Estimated Number of Respondents: 828.
    Frequency of Response: Initially, occasionally, and semiannually.
    Estimated Total Annual Hour Burden: 320,917.
    Estimated Total Annual Cost: $27,444,633, which includes 
$27,180,233 in labor costs, $16,000 in capital/startup costs, and 
$248,400 in operation and maintenance (O&M) costs.
    Changes in the Estimates: There is a small decrease in the total 
estimated burden currently identified in the OMB Inventory of Approved 
ICR Burdens. This change in burden from the most recently approved ICR 
is due to an adjustment. Minor calculation errors in the previous ICR 
were corrected.

    Dated: March 22, 2010.
John Moses,
Director, Collection Strategies Division.
[FR Doc. 2010-7316 Filed 3-31-10; 8:45 am]
BILLING CODE 6560-50-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.