Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting, 14426 [2010-6605]

Download as PDF 14426 Federal Register / Vol. 75, No. 57 / Thursday, March 25, 2010 / Notices DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on April 27, 2010, 9:30 a.m., in the Herbert C. Hoover Building, Room 3884, 14th Street between Constitution and Pennsylvania Avenues, NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on technical questions that affect the level of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and Introductions. 2. Remarks from the Bureau of Industry and Security Management. 3. Industry Presentations. 4. New Business. mstockstill on DSKH9S0YB1PROD with NOTICES Closed Session 5. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yspringer@bis.doc.gov no later than April 20, 2010. A limited number of seats will be available during the public session of the meeting. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate distribution of public presentation materials to the Committee members, the Committee suggests that the materials be forwarded before the meeting to Ms. Springer. The Assistant Secretary for Administration, with the concurrence of the General Counsel, formally determined on March 11, 2010 pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 § 10(d)), that the portion of this meeting dealing with pre-decisional changes to the Commerce Control List and U.S. export control policies shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. VerDate Nov<24>2008 16:42 Mar 24, 2010 Jkt 220001 2 §§ 10(a)(1) and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information contact Yvette Springer on (202) 482–2813. Dated: March 18, 2010. Yvette Springer, Committee Liaison Officer. [FR Doc. 2010–6602 Filed 3–24–10; 8:45 am] BILLING CODE 3510–JT–P DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical Advisory Committee (MPETAC) will meet on April 8, 2010, 9 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Pennsylvania and Constitution Avenues, NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to materials processing equipment and related technology. Agenda Open Session 1. Opening Remarks and Introductions. 2. Election of new Chairman. 3. Presentation of Papers and Comments by the Public. 4. Discussion on 2010 Proposals for Wassenaar Expert’s Meeting. Closed Session 5. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). The open session will be accessible via teleconference to 20 participants on a first come, first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yspringer@bis.doc.gov no later than April 1, 2010. A limited number of seats will be available for the public session. Reservations are not accepted. To the extent that time permits, members of the public may present oral statements to the Committee. The public may submit written statements at any time before or after the meeting. However, to facilitate the distribution of public presentation materials to the Committee members, the Committee suggests that presenters forward the public presentation PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 materials prior to the meeting to Ms. Springer via e-mail. The Assistant Secretary for Administration, with the concurrence of the delegate of the General Counsel, formally determined on March 11, 2010, pursuant to Section 10(d) of the Federal Advisory Committee Act, as amended (5 U.S.C. app. 2 §§ (10)(d)), that the portion of the meeting dealing with matters the disclosure of portion of the meeting dealing with matters the disclosure of which would be likely to frustrate significantly implementation of an agency action as described in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)1 and 10(a)(3). The remaining portions of the meeting will be open to the public. For more information, call Yvette Springer at (202) 482–2813. March 19, 2010. Yvette Springer, Committee Liaison Officer. [FR Doc. 2010–6605 Filed 3–24–10; 8:45 am] BILLING CODE 3510–JT–P DEPARTMENT OF COMMERCE Bureau of Industry and Security Regulations and Procedures Technical Advisory Committee; Notice of Partially Closed Meeting The Regulations and Procedures Technical Advisory Committee (RPTAC) will meet April 13, 2010, 9 a.m., Room 3884, in the Herbert C. Hoover Building, 14th Street between Constitution and Pennsylvania Avenues, NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration on implementation of the Export Administration Regulations (EAR) and provides for continuing review to update the EAR as needed. Agenda Public Session 1. Opening remarks by the Chairman. 2. Presentation of papers or comments by the Public. 3. Opening remarks by Bureau of Industry and Security. 4. Export Enforcement update. 5. Regulations update. 6. Working group reports. 7. Automated Export System (AES) update. Closed Session 8. Discussion of matters determined to be exempt from the provisions relating to public meetings found in 5 U.S.C. app. 2 §§ 10(a)(1) and 10(a)(3). E:\FR\FM\25MRN1.SGM 25MRN1

Agencies

[Federal Register Volume 75, Number 57 (Thursday, March 25, 2010)]
[Notices]
[Page 14426]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-6605]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Bureau of Industry and Security


Materials Processing Equipment Technical Advisory Committee; 
Notice of Partially Closed Meeting

    The Materials Processing Equipment Technical Advisory Committee 
(MPETAC) will meet on April 8, 2010, 9 a.m., Room 3884, in the Herbert 
C. Hoover Building, 14th Street between Pennsylvania and Constitution 
Avenues, NW., Washington, DC. The Committee advises the Office of the 
Assistant Secretary for Export Administration with respect to technical 
questions that affect the level of export controls applicable to 
materials processing equipment and related technology.

Agenda

Open Session

    1. Opening Remarks and Introductions.
    2. Election of new Chairman.
    3. Presentation of Papers and Comments by the Public.
    4. Discussion on 2010 Proposals for Wassenaar Expert's Meeting.

Closed Session

    5. Discussion of matters determined to be exempt from the 
provisions relating to public meetings found in 5 U.S.C. app. 2 
Sec. Sec.  10(a)(1) and 10(a)(3).
    The open session will be accessible via teleconference to 20 
participants on a first come, first serve basis. To join the 
conference, submit inquiries to Ms. Yvette Springer at 
Yspringer@bis.doc.gov no later than April 1, 2010.
    A limited number of seats will be available for the public session. 
Reservations are not accepted. To the extent that time permits, members 
of the public may present oral statements to the Committee. The public 
may submit written statements at any time before or after the meeting. 
However, to facilitate the distribution of public presentation 
materials to the Committee members, the Committee suggests that 
presenters forward the public presentation materials prior to the 
meeting to Ms. Springer via e-mail.
    The Assistant Secretary for Administration, with the concurrence of 
the delegate of the General Counsel, formally determined on March 11, 
2010, pursuant to Section 10(d) of the Federal Advisory Committee Act, 
as amended (5 U.S.C. app. 2 Sec. Sec.  (10)(d)), that the portion of 
the meeting dealing with matters the disclosure of portion of the 
meeting dealing with matters the disclosure of which would be likely to 
frustrate significantly implementation of an agency action as described 
in 5 U.S.C. 552b(c)(9)(B) shall be exempt from the provisions relating 
to public meetings found in 5 U.S.C. app. 2 Sec. Sec.  10(a)1 and 
10(a)(3). The remaining portions of the meeting will be open to the 
public.
    For more information, call Yvette Springer at (202) 482-2813.

    March 19, 2010.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2010-6605 Filed 3-24-10; 8:45 am]
BILLING CODE 3510-JT-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.