Certain New Chemicals; Receipt and Status Information, 11404-11414 [2010-5129]
Download as PDF
<![CDATA[
11404
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2010–0112; FRL–8814–1]
Certain New Chemicals; Receipt and
Status Information
erowe on DSK5CLS3C1PROD with NOTICES2
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 26, 2009
through January 22, 2010, consists of the
PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before April 9,
2010.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2010–0112, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2010–0112.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
2010–0112. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket index available
at https://www.regulations.gov. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone number
of the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
PO 00000
Frm 00002
Fmt 4701
Sfmt 4703
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
E:\FR\FM\10MRN2.SGM
10MRN2
11405
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 26, 2009
through January 22, 2010, consists of the
PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
and TME, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit I.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
10/26/09
01/23/10
H.B. Fuller
(G) Industrial adhesive
P–10–0023
10/26/09
01/23/10
CBI
P–10–0024
10/26/09
01/23/10
CBI
P–10–0025
10/26/09
01/23/10
CBI
P–10–0026
10/26/09
01/23/10
CBI
P–10–0027
10/26/09
01/23/10
CBI
P–10–0028
10/26/09
01/23/10
CBI
P–10–0029
10/28/09
01/25/10
CBI
P–10–0030
P–10–0031
10/28/09
10/28/09
01/25/10
01/25/10
PPG Industries, Inc.
Reichhold, Inc.
(S) Pigment derivative used in ink
contained in ink jet printer cartridges
(G) Precursor to another chemical
substance, destructive use
(G) Precursor to another chemical
substance, destructive use
(G) Precursor to another chemical
substance, destructive use
(G) Precursor to another chemical
substance, destructive use
(G) Precursor to another chemical
substance, destructive use
(S) Acrylic polymer used in the manufacture of adhesive tapes
(G) Component of a coating
(G) Flexibilizing resin, non-dispersive
P–10–0032
10/27/09
01/24/10
CBI
(G) Dewaxing aid
P–10–0033
10/27/09
01/24/10
CBI
(G) Gear oil additive
P–10–0034
10/27/09
01/24/10
Firmenich Inc.
P–10–0035
P–10–0036
10/29/09
10/30/09
01/26/10
01/27/10
CBI
CBI
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
(G) Conditioning agent
(S) Polyester filament and staple
P–10–0037
10/30/09
01/27/10
CBI
P–10–0038
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0022
11/02/09
01/30/10
CBI
P–10–0039
11/03/09
01/31/10
Nanocomp Technologies, Inc.
P–10–0040
11/03/09
01/31/10
P–10–0041
11/03/09
01/31/10
Nanocomp Technologies, Inc.
Huntsman Corporation
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Frm 00003
(S) Flame retardant in polyester filament and staple
(S) Flame retardant for use in adhesives and coatings
(G) For all applications listed here the
field is composite structures for
aerospace
(G) For all applications listed here the
field is aerospace
(G) Dispersing agent
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
Chemical
(G)
Isocyanate-functional
polyurethane prepolymer
(G) Benzenesulfonic acid, 4-amino,
azo pigment
(G) Substituted benzoyl chloride
(G) Substituted pyrazolone
(G) Salt of condensation product of
substituted pyrazolone
(G) Substituted benzoic acid
(G) Substituted benzoic acid
(G) Acrylic polymer
(G) Aromatic polyurethane
(G)
Alkanediol,
polymer
with
alkyleneamine, isocyanate and glycol
(G) Alkylester, polymer with alkyl acrylate
(G) Aromatic hydrogenated poly
alkyldiene containing poly alkyl
methacrylate
(S) 1(2H)-naphthalenone, octahydro2,3,81-trimethyl-, (3R, 4AR, 8AR)rel(G) Sodium carboxylate
(G)
Substituted
polyethylene
terephtalate
(G) Substituted propionic acid
(G) Heterocyclic salt
(S) Carbon
(S) Carbon
(G) Polyether polyacid comb polymer
10MRN2
11406
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
11/03/09
11/03/09
11/04/09
01/31/10
01/31/10
02/01/10
CBI
CBI
Green Era Solutions
(S) Laminating adhesive
(S) Coatings application
(S) Fragrance ingredient
P–10–0045
P–10–0046
11/04/09
11/04/09
02/01/10
02/01/10
CBI
Coim USA Inc.
(G) Adhesives
(S) Foam insulation
P–10–0047
11/05/09
02/02/10
CBI
(S) Curing agent for epoxy resin in
protective coatings
P–10–0048
11/05/09
02/02/10
CBI
P–10–0049
P–10–0050
11/06/09
11/09/09
02/03/10
02/06/10
CBI
CBI
P–10–0051
11/09/09
02/06/10
Cognis Corporation
(G) Pigment dispersant; drilling fluid
dispersant
(S) Resin for coatings for metal
(G) Component in corrosion inhibitor
formulation for oil field use
(S) Performance additive for hard surface cleaners
P–10–0052
P–10–0053
11/09/09
11/10/09
02/06/10
02/07/10
CBI
CBI
P–10–0054
11/10/09
02/07/10
P–10–0055
11/09/09
02/06/10
DIC International
(USA) LLC
CBI
P–10–0056
11/09/09
02/06/10
CBI
(S) Ingredient in fragrance compound
P–10–0057
P–10–0058
11/09/09
11/12/09
02/06/10
02/09/10
CBI
CBI
(G) Fuel additive
(G) Intermediate
P–10–0059
11/12/09
02/09/10
CBI
(G) Intermediate
P–10–0060
11/12/09
02/09/10
CBI
(G) Surface active agent
P–10–0061
11/13/09
02/10/10
CBI
P–10–0062
11/13/09
02/10/10
CBI
P–10–0063
11/12/09
02/09/10
Mitsui Chemicals
America, Inc.
(G) Chemical intermediate - destructive use
(G) Chemical intermediate - destructive use
(S) Binder for toner
P–10–0064
P–10–0065
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0042
P–10–0043
P–10–0044
11/16/09
11/16/09
02/13/10
02/13/10
CBI
CBI
P–10–0066
P–10–0067
11/16/09
11/16/09
02/13/10
02/13/10
CBI
CBI
P–10–0068
11/17/09
02/14/10
CBI
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
(G) Fuel additive intermediate
(S) Reactant for the manufacture of a
pesticide
(G) Additive for lubricating oil
(S) Ingredient in fragrance compound
(G) Curing aid
(G) Additive, open, non-dispersive
use
(G) Ethoxylation initiator
(G) Used in the manufacture of polyurethane foam
(S) Additive for rubber articles
Frm 00004
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
Chemical
(G) Polyester polyurethane
(G) Silicone modified alkyd resin
(S) Extractives and their physically
modified derivatives. Callitropsis
nootkatensis.
Oil,
callitropsis
nootkatensis
(G) Solvent free adhesives
(S) 1,4-benzenedicarboxylic acid,
polymer
with
2,2bis(hydroxymethyl)-1,3-propanediol,
hexanedioic acid, .alpha.-hydro.omega.-hydroxypoly(oxy-1,2ethanediyl), 1,3-isobenzofurandione
and 2,2′-oxybis[ethanol], benzoate
(G) Alkenoic acid, 2-methyl-, 2oxiranylmethyl ester, reaction products
with
4,4′-methylenebis
(cyclohexanamine)
(G) Sulfonated SMA
(G) Polyester polyurethane
(G) Amine salts of fatty acids
(S) Starch, 2-carboxyethyl 2-methyl-3oxo-3-[[3(trimethylammonio)propyl]amino]propyl ether, chloride
(G) Aryl polyolefin
(G) Halogenated aromatic amine
(G) Fluorinated acrylic acid ester copolymer (telomer type)
(S) Butanoic acid, 3-hydroxy-, 5-methyl-2-(1-methylethyl)cyclohexyl ester
(S) Butanoic acid, 3-mercapo-2-methyl-, ethyl ester
(G) Polyolefin aryl amine
(G) Partially fluorinated alcohol substituted glycol
(G) Partially fluorinated alcohol substituted glycol
(G) Partially fluorinated alcohol substituted glycol
(G) Alkyl thiol, manufacture of, byproducts from, distant lights
(G) Alkyl thiol, manufacture of, byproducts from, distant residues
(G) Aromatic discarboxylic acid, polymer
with
1,3diisocyanatomethylbenzene,
.alpha.,
.alpha′.-[(1methylethylidene)di-4,1-phenylene]bis[.omega.hydroxypoly[oxy(methyl-1-2,
ethanediyl)]]
and
2,2′oxybis[etehanol]
(G) Amidosilane
(G) Polyether modified polyurea
(G) Partially fluorinated ortho-ester
(G) Organotin compound
(G) Sulfur silane
10MRN2
11407
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
11/17/09
02/14/10
CBI
(G) Used in adhesive products
P–10–0070
11/17/09
02/14/10
CBI
(G) Used in adhesive products
P–10–0071
11/17/09
02/14/10
CBI
(G) Used in adhesive products
P–10–0072
11/13/09
02/10/10
11/17/09
11/17/09
02/14/10
02/14/10
The Dow Chemical
Company
CBI
Alberdingk Boley, Inc.
(S) Monomer inhibitor
P–10–0073
P–10–0074
P–10–0075
11/18/09
02/15/10
CBI
P–10–0076
11/18/09
02/15/10
CBI
P–10–0077
P–10–0078
11/18/09
11/18/09
02/15/10
02/15/10
11/18/09
02/15/10
CBI
Dow Chemical Company
CBI
(G) Resin for use in manufacture of
reinforced composite products
(S) Raw material used for production
of 1,1-biphenyl, 3,3′,4,4′-tetramethyl
(G) Automotive coatings
(G) Adhesive component
P–10–0079
P–10–0080
P–10–0081
11/19/09
11/18/09
02/16/10
02/15/10
CBI
CBI
(G) Adhesive
(S) Curing agent for epoxy resin in
protective coatings
P–10–0082
11/18/09
02/15/10
CBI
(G) Multi-purpose additive
P–10–0083
11/05/09
02/02/10
CBI
(G) Resin component
P–10–0084
11/20/09
02/17/10
CBI
(G) Dispersion additive for printing ink
P–10–0085
P–10–0086
P–10–0087
11/23/09
11/23/09
11/23/09
02/20/10
02/20/10
02/20/10
CBI
CBI
CBI
(G) Non-dispersive use
(G) Laminate resin viscosity modifier
(G) Destructive use
P–10–0088
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0069
11/24/09
02/21/10
Frx Polymers, Inc.
P–10–0089
11/25/09
02/22/10
CBI
(G) Frx co-polymers are non-halogenated
polyphosphonate-copolycarbonate flame retardant polymers that address the need to replace the current commercial bromine-containing flame retardants
that are being phased out due to
environmental regulation. Flame
retardants are required to meet fire
safety standards in order to reduce
flammability of combustible materials. Use sectors are: consumer
electronics as well as building and
construction lighting.
(G) Solvent / curing agent
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Frm 00005
(G) Hardener for industrial coatings
(S) For special metal coatings
(G) Colorant
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
Chemical
(G) alkyl acrylate, polymer with aliphatic acid vinyl ester, vinyl monomer, acrylate and hydroxyalkyl acrylate
(G) acrylate, polymer with aliphatic
acid vinyl ester, vinyl monomer and
hydroxyalkyl acrylate
(G) alkyl acrylate, polymer with aliphatic acid vinyl ester, acrylate
hydroxyalkyl acrylate, alkanenitrile
and acrylate
(G) Substituted oxidized piperidinyl
derivative
(G) Blocked polyisocyanate
(G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2-propen
-1-yl)oxy]ethyl
ester, polymer with butyl 2-methyl2-propenoate, ethenylbenzene, 2ethylhexyl 2-propenoate, methyl 2methyl-2-propenoate,
phosphoric
acid, di-ester with hydroxy ethyl
methacrylate and 2-(phosphonooxy)
ethyl 2-methyl-2-propenoate
(G) Brominated aromatic polyether
polyester
(S) Benzene, 4-bromo-1,2-dimethyl(G) Linear hydroxy funtional polyester
(G) Capped polyurethane adduct
(G) Substituted naphthalene mixed
salt
(G) Mdi modified polyester resin
(G) Phenol, polymer with formaldehyde, glycidyl ether, reaction products
with
5-amino-1,3,3trialkylcycloalkanemethanamine
(S) 1,2,3-propanetriol, homopolymer,
hexadecanoate octadecanoate
(G) Hydroxy-aryl, polymer with substituted benzene, cyanate
(G) Carbazole violet sulfonamide derivate
(G) Bismuth salt of lactic acid
(G) Epoxidized benzoxazine
(G) Octylated phenyl-alpha-naphthylamine
(G)
Polyphosphonate-copolycarbonate
(G) Dialkyl imidazolium salt
10MRN2
11408
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with 1,6-diisocyanatohexane, polypropylene glycol diamine and polypropylene
glycol
mono(2aminomethylethyl) ether ether with
trimethylolpropane (3:1)
(S) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with 4-aminobenzoic acid, 1,6diisocyanatohexane, polypropylene
glycol diamine and polypropylene
glycol
mono(2-aminomethylethyl)
ether ether with trimethylolpropane
(3:1)
(S) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with polymethylenepolyphenylene
isocyanate, polypropylene glycol
diamine and polypropylene glycol
mono(2-aminomethylethyl)
ether
ether with trimethylolpropane (3:1)
(S) Fatty acids, C18-unsaturated,
dimers, hydrogenated, polymers
with
4-aminobenzoic
acid,
polymethylenepolyphenylene
isocyanate, polypropylene glycol
diamine and polypropylene glycol
mono(2-aminomethylethyl)
ether
ether with trimethylolpropane (3:1)
(S) Fatty acids, C18-unsaturated,
dimers, polymers with 4-aminobenzoic
acid,
1,6diisocyanatohexane, polypropylene
glycol diamine and polypropylene
glycol
mono(2-aminomethylethyl)
ether ether with trimethylolpropane
(3:1)
(S) Fatty acids, C18-unsaturated,
dimers, polymers with 4-aminobenzoic
acid,
polymethylenepolyphenylene
isocyanate, polypropylene glycol
diamine and polypropylene glycol
mono(2-aminomethylethyl)
ether
ether with trimethylolpropane (3:1)
(G) Aminated epoxy salts
(G) Aminated epoxy salt
11/24/09
02/21/10
CBI
(G) Polymer additive laundry care
products
P–10–0091
11/24/09
02/21/10
CBI
(G) Polymer additive laundry care
products
P–10–0092
11/24/09
02/21/10
CBI
(G) Polymer additive laundry care
products
P–10–0093
11/24/09
02/21/10
CBI
(G) Polymer additive laundry care
products
P–10–0094
11/24/09
02/21/10
CBI
(G) Polymer additive laundry care
products
P–10–0095
11/24/09
02/21/10
CBI
(G) Polymer additive laundry care
products
P–10–0096
P–10–0097
11/30/09
11/30/09
02/27/10
02/27/10
CBI
CBI
P–10–0098
11/25/09
02/22/10
CBI
(G) Industrial coating binder
(G) Industrial coating additive for
electrocoat
(G) Additive for pigment ink
P–10–0099
12/02/09
03/01/10
CBI
(G) Modifier for polymers
P–10–0100
12/03/09
03/02/10
CBI
P–10–0101
P–10–0102
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0090
12/03/09
12/03/09
03/02/10
03/02/10
CBI
Robertet, Inc.
(G) Additive, open, non-dispersive
use
(G) Chemical intermediate
(S) As an odoriferous component of
fragrance compounds
P–10–0102
12/03/09
03/02/10
Robertet, Inc.
(S) As an odoriferous component of
fragrance compounds
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Frm 00006
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
(G) 2-propenoic acid, 2-methyl-, polymer with substituted esters with
acrylic acid and 2-propenoic acid
(S) Phosphonic acid, p-octyl-, lanthanum(3+) salt (2:1)
(G) Polyester amine compound
(G) Aromatic polyester
(S) Definition: Extractives and their
physically
modified
derivatives
jasminum sambac.
(S) Oils, jasmine, jasminum sambac
10MRN2
11409
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Fatty acids, C18-unsaturated, dime esters, hydrogenated, polymers
with
diethylene
glycol,
1,6diisocyanato-2,2,4-trimethylhexane,
1,6-diisocyanato-2,4,4trimethylhexane, 2-heptyl-3,4-bis(9isocyanatononyl)-1pentylcyclohexane,
1,1′methylenebis[4isocyanatobenzene], 2-oxepanone
and tricyclodecanedimethanol, 2hydroxyethyl acrylate-blocked
(S) Silicic acid, 1-ethenylhexyl ethyl
ester
(S) 1,2-cyclohexane dicarboxylic acid
bis (2-ethylhexyl) ester
(G) Hydroxyl - terminated aliphatic
polycarbonate
(S) Multiwall carbon nanotubes
12/04/09
03/03/10
CBI
(G) Resin for ultra violet curable adhesives
P–10–0104
12/08/09
03/07/10
Henkel Corporation
(S) Fragrance for fabric softener
P–10–0105
12/09/09
03/08/10
CBI
P–10–0106
12/10/09
03/09/10
12/10/09
03/09/10
Instrumental Polymer
Technologies, LLC
CBI
(S) Plasticizer for use with pvc and
rubber
(G) Resin for coatings
P–10–0107
P–10–0108
P–10–0109
P–10–0110
P–10–0111
12/10/09
12/08/09
12/11/09
12/10/09
03/09/10
03/07/10
03/10/10
03/09/10
CBI
CBI
CBI
The Dow Chemical
Company
P–10–0112
12/10/09
03/09/10
The Dow Chemical
Company
P–10–0113
12/10/09
03/09/10
The Dow chemical
Company
P–10–0114
12/10/09
03/09/10
The Dow Chemical
Company
P–10–0115
12/11/09
03/10/10
CBI
P–10–0116
12/11/09
03/10/10
CBI
P–10–0117
12/11/09
03/10/10
CBI
P–10–0118
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0103
12/11/09
03/10/10
CBI
P–10–0119
12/11/09
03/10/10
CBI
P–10–0120
12/11/09
03/10/10
CBI
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Frm 00007
(G) (1) Polymer composites : Open,
non-dispersive use; (2) Liquid dispersions : Open, non-dispersive
use; (3) Liquid dispersion : Contained use
(S) Antioxidant for plastic articles
(G) Coating additive
(G) Detergent
(S) Component rigid polyurethane
foams for construction panels; component rigid polyurethane foam for
appliances; component rigid foam
spray applications
(S) Component rigid polyurethane
foams for construction panels; component rigid polyurethane foam for
appliances; component rigid foam
spray applications
(S) Component rigid polyurethane
foams for construction panels; component rigid polyurethane foam for
appliances; component rigid foam
spray applications
(S) Component rigid polyurethane
foams for construction panels; component rigid polyurethane foam for
appliances; component rigid foam
spray applications
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
(G) Thioether antioxidant
(G) Urethane acrylate oligomer
(G) Polyester
(G) Benzene dicarboxylic acid, polyester with glycol and polyethylene
glycol
(G) Benzene dicarboxylic acid, polyester with glycol and polyethylene
glycol
(G) Benzene dicarboxylic acid, polyester with glycol and polyethylene
glycol
(G) Benzene dicarboxylic acid, polyester with glycol and polyethylene
glycol
(S) Nanofiber type: PR-19 (nanofiber
grade: XT-PS
(S) Nanofiber type: PR-19 (nanofiber
grade: XT-LHT)
(S) Nanofiber type: PR-19 (nanofiber
grade: XT-HHT)
(S) Nanofiber type: PR-24 (nanofiber
grade: XT-PS)
(S) Nanofiber type: PR-24 (nanofiber
grade: XT-LHT)
(S) Nanofiber type: PR-24 (nanofiber
grade: XT-HHT)
10MRN2
11410
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(S) Electrical conductivity additive for
composites; mechanical reinforcement for composites; additive for
battery electrodes
(G) Industrial coating binder
(G) Filling material
(S) Nanofiber type: PR-19 (nanofiber
grade: XT-PS-AM)
12/11/09
03/10/10
CBI
P–10–0122
12/11/09
03/10/10
CBI
P–10–0123
12/11/09
03/10/10
CBI
P–10–0124
12/11/09
03/10/10
CBI
P–10–0125
12/11/09
03/10/10
CBI
P–10–0126
12/11/09
03/10/10
CBI
P–10–0127
P–10–0128
12/14/09
12/14/09
03/13/10
03/13/10
CBI
CBI
P–10–0129
12/16/09
03/15/10
Henkel Corporation
(S) A polymerizable component of industrial adhesive and sealant
P–10–0130
12/16/09
03/15/10
Alberdingk Boley, Inc.
(S) Polyurethane coating for wood
P–10–0131
12/16/09
03/15/10
CBI
(G) Rheological additive for paints
P–10–0132
P–10–0133
12/16/09
12/17/09
03/15/10
03/16/10
CBI
CBI
P–10–0134
12/17/09
03/16/10
CBI
P–10–0135
P–10–0136
12/17/09
12/17/09
03/16/10
03/16/10
3M Company
CBI
P–10–0137
P–10–0138
12/18/09
12/18/09
03/17/10
03/17/10
CBI
CBI
P–10–0139
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0121
12/18/09
03/17/10
CBI
P–10–0140
P–10–0141
P–10–0142
12/18/09
12/18/09
12/22/09
03/17/10
03/17/10
03/21/10
CBI
CBI
CBI
P–10–0143
12/22/09
03/21/10
Instrumental Polymer
Technologies, LLC
(S) Catalyst complexing agent
(G) Chemical intermediate - destructive use
(G) Chemical intermediate - destructive use
(G) Heat transfer fluid
(G) Monomer for industrial paints,
coatings, ink and adhesives
(G) Coating agent
(G) Perfoemance chemical for oilfield
applications
(G) Perfoemance chemical for oilfield
applications
(G) Adhesive for car
(G) Adhesive component
(G) Component of fragrance mixture
for highly-dispersive applications
(G) Resin for coatings
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Frm 00008
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
(S) Nanofiber type: PR-19 (nanofiber
grade: XT-LHT-AM)
(S) Nanofiber type: PR-19 (nanofiber
grade: XT-HHT-AM)
(S) Nanofiber type: PR-24 (nanofiber
grade: XT-PS-AM)
(S) Nanofiber type: PR-24 (nanofiber
grade: XT-LHT-AM)
(S) Nanofiber type: PR-24 (nanofiber
grade: XT-HHT-AM)
(G) Blocked isocyanate crosslinker
(S) Siloxanes and silicones, di-me, 3hydroxypropyl
group-terminated,
ethoxylated, polymers with 1,6diisocyanato-2,2,4-trimethylhexane,
1,6-diisocyanato-2,4,4trimethylhexane, polypropylene glycol ether with glycerol (3:1) and
polypropylene glycol ether with
pentaerythritol (4:1), polypropylene
glycol mono-bu ether-blocked
(S)
Benzene,
1,3-bis(1-chloro-1methylethyl)-, reaction products
with polyisobtutylene and trimethyl2-propen-1-ylsilane
(G) Linseed oil, ester with pentaerythritol, polymer with .alpha.-hydro.omega.-hydroxypoly(oxy-1,4butanediyl),
3-hydroxy-2(hydroxymethyl) 2-methylpropanoic
acid
and
5-isocyanato-1(isocyanatomethyl)alkylcyclohexane, compounds with
triethylamine
(G) Polyester salt of hydrogenated
dimer of fatty acids and glycerol.
(G) Aromatic hydrocarbon
(G) Alkyl sulfide, manufacture of, byproducts from, distant lights
(G) Alkyl sulfide, manufacture of, byproducts from, distant lights
(G) Fluoroketone
(G) Polythiol
(G) Substituted polyethyleneimine
(G)
Long
chain
alkylacrylate,
homopolymers
(G)
Long
chain
alkylacrylate,
homopolymers
(G) Urethane modified epoxy resin
(G) Carbohydrate
(G) Furan, 2-(1,1-dimethylethyl)-2, 5dihydro-alkyl substituted
(G)
Hydroxyl-terminated
aliphatic
polycarbonate
10MRN2
11411
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
Wacker Chemical Corporation
Henkel Corporation
(S) Additive for paper and foil coatings and bonding agents
(S) Fragrance for fabric softener
(G)
(G)
(G)
(G)
(G)
(G) Methyl-phenyl silicone resin with
alkoxy groups
(S) Silicic acid, 9-decen-1-yl ethyl
ester
(G) Alkyl substituted polyamide
(G) Alkoxylated alkylamine
(G) Partially fluorinated borate ester
(G) Alkoxylated alkylamine salt
(G) Hydroxy - terminated; aliphatic
polycarbonate
(S) 1,2-propanediol, 3-(3,4-dihydro1(2H)-quinolinyl)(G) Phosphated polyalkoxylate
(S) 1H-imidazole, 1-(1-methylethyl)(S)
Quinoline,
1-butyl-1,2,3,4tetrahydro(G) Acid-functional oligomer
(G) Substituted phenyl azo substituted phenyl alkyl substituted
indole
(S) 2-propenoic acid, 2-methyl-,
octahydro-4, 7-methano-1h-inden-5yl ester
(S) Disiloxane, 1,1,3,3-tetramethyl-,
polymer with 1,7-octadiene
(G) Polycyclic polyamine diester
organometallic compound
(G) Polyester acrylate
(S) Silane, dimethyl(1-methylethyl)-
12/22/09
03/21/10
P–10–0145
12/23/09
03/22/10
P–10–0146
P–10–0147
P–10–0148
P–10–0149
P–10–0150
12/23/09
12/23/09
12/23/09
12/23/09
12/24/09
03/22/10
03/22/10
03/22/10
03/22/10
03/23/10
P–10–0151
12/23/09
03/22/10
CBI
Huntsman Corporation
CBI
Huntsman Corporation
Instrumental polymer
technologies, LLC
Henkel Corporation
P–10–0152
P–10–0153
P–10–0154
12/24/09
12/24/09
12/23/09
03/23/10
03/23/10
03/22/10
CBI
Sachem, Inc.
Henkel Corporation
P–10–0155
P–10–0156
12/24/09
12/23/09
03/23/10
03/22/10
CBI
Huntsman International, LLC
P–10–0157
12/28/09
03/27/10
Henkel Corporation
P–10–0158
12/28/09
03/27/10
Henkel Corporation
P–10–0159
12/29/09
03/28/10
CBI
P–10–0160
P–10–0161
01/04/10
01/04/10
04/03/10
04/03/10
CBI
Gelest, Inc.
P–10–0162
01/04/10
04/03/10
Gelest, Inc.
P–10–0163
01/04/10
04/03/10
Gelest, Inc.
P–10–0164
01/05/10
04/04/10
Worwag Coatings LLC
(S) Automotive part paint additive
P–10–0165
P–10–0166
01/06/10
01/07/10
04/05/10
04/06/10
CBI
CBI
(G) Printing additive
(G) Adhesive component
P–10–0167
P–10–0168
P–10–0169
01/08/10
01/11/10
01/11/10
04/07/10
04/10/10
04/10/10
CBI
CBI
CBI
P–10–0170
P–10–0171
01/12/10
01/13/10
04/11/10
04/12/10
CBI
Sachem, Inc.
(G) Flame retardant
(S) Resin for coatings for metal
(G) Chemical intermediate - destructive use
(G) Coatings
(G) Chemical intermediate
P–10–0172
01/13/10
04/12/10
Sachem, Inc.
(G) Destructive use catalyst
P–10–0173
01/14/10
04/13/10
The Shepherd Chemical Company
(G) Automotive additive
P–10–0174
erowe on DSK5CLS3C1PROD with NOTICES2
P–10–0144
01/14/10
04/13/10
The Shepherd Chemical Company
(G) Automotive additive
P–10–0175
01/14/10
04/13/10
CBI
(G) Open nondispersive (component
in polyurethane coating)
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Processing aid
Intermediate amine
Ethoxylation initiator
Grinding aid
Resin for coatings
(S) Cure accelerator in industrial adhesive formulations
(G) Filler dispersant
(G) Chemical intermediate
(S) Cure modifier in industrial adhesive formulations
(G) Open, non-dispersive use.
(S) Disperse dye for polyester fabrics
(S) A polymerizable component in
novel adhesive and sealant formulations
(S) A polymerizable component in industrial adhesive formulations
(G) Coatings additive
(G) Lithographic inks
(S)
Conversion
to
isopropyldimethylchlorosilane; Research
(S)
Conversion
to
(3isopropyldimethylsiloxy)prop-1-yl
chloride; Research
(S) Conversion to lithium reagent; Research
Frm 00009
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
(S)
Silane,
methylethyl)-
chlorodimethyl(1-
(S)
Silane,
(3chloropropoxy)dimethyl(1methylethyl)(G) Aliphatic diisocyanates, modified
dimer fatty acid, polyesterpolyol,
bishydroxymethylpropionic
acid
polymer
(G) Polyester resin
(G)
1,1′methylenebis[isocyanatobenzene],
polymer with polyester polyols and
a polyether polyol
(G) Brominated aromatic oligomer
(G) Polyester polyurethane
(G) Alkyl thiols, manufacturer of, byproducts from, distant heavies
(G) Urethane acrylate
(S)
1H-imidazolium,
1,3-bis(1methylethyl)-, bromide
(S)
1H-imidazolin,
1,3-bis(1methylethyl)-, hydroxide
(G) Vinylimidazole (VIMA) grafted
poly alpha olefin (PAO) complexed
with diisopropoxy titanium bisacetylacetonate
(G) Vinylimidazole (VIMA) grafted
poly alpha olefin (PAO) complexed
with
molybdenum
borate
neodecanoate
(G) Aliphatic hydroxyfunctional polyester-polyurethane dispersion
10MRN2
11412
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
I. 161 PREMANUFACTURE NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10—Continued
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
P–10–0176
01/15/10
04/14/10
CBI
(G) Electrographic toner
P–10–0177
01/19/10
04/18/10
(S) Inhibited curing agent
P–10–0178
01/19/10
04/18/10
Umicore Precious Metals NJ, LLC
Hitachi Chemical Co.
America, Ltd.
P–10–0179
01/19/10
04/18/10
CBI
(G) Industrial liquid coatings
P–10–0180
01/19/10
04/18/10
CBI
(S) Curing agent or accelerator for
epoxy resin
P–10–0181
01/19/10
04/18/10
(G) Component of electrical laminates
P–10–0182
01/19/10
04/18/10
The Dow Chemical
Company
CBI
In Table II of this unit, EPA provides
the following information (to the extent
(G) Aliphatic polycarboxylic acid, polymer with aromatic polycarboxylic
acid and aliphatic polyol
(G) PT carbonyl cyclosiloxane
(S) Adhesive for semiconductor packages
(G) Coated particles for support
(S) 2-propenoic acid, 2-methyl-, 2oxiranylmethyl ester, polymer with
butyl
2-propenoate,
ethyl
2propenoate and 2-propenenitrile
(G) Polymer of tall oil fatty acid, aliphatic diols, aliphatic polyols, and
aromatic acids
(G) Alkanediamines polymer with 1,6diisocyanatohexane, 1H-imidazole1-propanamine -blocked
(G) Phenyl glycidyl ether derivative
(G) Aromatic isocyanate
product with sand
reaction
that such information is not claimed as
CBI) on the TME received:
II. 1 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 10/26/09 TO 1/22/10
T–10–0001
10/28/09
Projected
Notice
End Date
Manufacturer/Importer
12/11/09
Received
Date
Case No.
PPG Industries, Inc.
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(G) Component of a coating
(G) Aromatic polyurethane
CBI) on the Notices of Commencement
to manufacture received:
III. 117 NOTICES OF COMMENCEMENT FROM: 10/26/09 TO 1/22/10
erowe on DSK5CLS3C1PROD with NOTICES2
Case No.
P–04–0179
P–04–0426
P–04–0456
P–05–0080
P–05–0081
P–05–0082
P–05–0083
P–05–0084
P–05–0085
P–05–0086
P–05–0088
P–05–0090
P–05–0091
P–05–0092
P–05–0093
P–05–0094
P–05–0095
P–05–0096
P–05–0097
P–05–0098
P–05–0099
P–05–0100
P–05–0101
P–07–0013
P–07–0356
VerDate Nov<24>2008
Received Date
11/17/09
12/01/09
11/04/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
11/16/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
12/28/09
01/06/10
12/23/09
15:13 Mar 09, 2010
Commencement
Notice End Date
11/10/09
10/27/09
10/23/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
10/24/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/08/09
12/07/09
12/14/09
Jkt 220001
PO 00000
Chemical
(G) Tertiary amine carboxylic acid compound
(G) Dithiophosphate alkyl ester
(G) Neutralized acrylic polymer
(G) Chemical 1: Paraffinic light base oil
(G) Paraffinic heavy base oil
(G) Hydrotreated middle distillate
(G) Light catalytic cracked distillate
(G) Hydrocracked light distillate
(G) Hydrotreated light distillate
(G) Hydrocracked heavy distillate
(G) Branched and linear hydrocarbons
(G) Chemical 1: Heavy naphtha
(G) Chemical 2: Hydrocracked heavy naphtha
(G) Hydrodesulfurized heavy naphtha
(G) Neutralized light naphtha
(G) Hydrotreated heavy naphtha
(G) Catalytic cracked heavy naphtha
(G) Chemical 1: Light naphtha
(G) Chemical 2: Hydrocracked light naphtha
(G) Hydrodesulfurized light naphtha
(G) Neutralized light naphtha
(G) Catalytic cracked light naphtha
(G) Hydrotreated light naphtha
(G) Alkylphenol novolak modified with amine and epoxy
(G)
Polymer
with
aliphatic
diisocyanates,
polycarbonatediol
bishydroxymethylproionic acid
Frm 00010
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
10MRN2
and
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
11413
III. 117 NOTICES OF COMMENCEMENT FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Received Date
Commencement
Notice End Date
01/06/10
12/18/09
P–07–0418
P–07–0435
P–07–0586
P–07–0622
P–08–0046
P–08–0047
P–08–0069
P–08–0179
P–08–0219
P–08–0238
P–08–0508
P–08–0631
10/28/09
12/23/09
11/10/09
11/02/09
11/30/09
11/30/09
12/07/09
12/15/09
12/30/09
11/02/09
10/26/09
11/16/09
09/16/09
12/14/09
10/30/09
10/23/09
11/20/09
11/11/09
11/18/09
12/03/09
12/28/09
10/12/09
10/05/09
11/04/09
P–08–0669
P–08–0670
P–08–0707
P–09–0048
P–09–0061
P–09–0075
P–09–0076
P–09–0115
11/10/09
12/11/09
11/19/09
10/28/09
12/11/09
11/03/09
12/08/09
11/02/09
11/03/09
11/03/09
11/01/09
10/06/09
12/08/09
10/09/09
11/26/09
10/07/09
P–09–0120
P–09–0127
P–09–0141
P–09–0160
01/05/10
01/11/10
01/19/10
12/07/09
12/14/09
12/19/09
12/18/09
11/26/09
P–09–0165
P–09–0166
P–09–0172
11/03/09
11/16/09
12/15/09
07/07/09
11/10/09
12/04/09
P–09–0174
P–09–0200
P–09–0210
P–09–0245
12/09/09
01/14/10
12/08/09
12/16/09
11/13/09
11/15/09
11/23/09
12/14/09
P–09–0246
12/29/09
12/22/09
P–09–0247
P–09–0253
P–09–0254
P–09–0257
P–09–0271
P–09–0279
12/28/09
12/11/09
11/06/09
11/24/09
11/27/09
11/02/09
12/05/09
11/27/09
11/02/09
10/18/09
11/17/09
10/29/09
P–09–0286
11/06/09
10/28/09
P–09–0289
P–09–0308
P–09–0347
P–09–0374
10/27/09
11/16/09
11/05/09
11/23/09
08/05/09
11/05/09
10/09/09
10/30/09
P–09–0379
P–09–0386
P–09–0409
P–09–0414
P–09–0427
erowe on DSK5CLS3C1PROD with NOTICES2
P–07–0358
11/03/09
11/09/09
10/27/09
12/01/09
11/03/09
09/15/09
10/14/09
10/16/09
11/04/09
10/28/09
P–09–0428
P–09–0435
P–09–0451
P–09–0453
P–09–0454
P–09–0477
P–09–0478
P–09–0481
P–09–0485
P–09–0490
12/17/09
11/10/09
12/22/09
11/04/09
01/05/10
11/12/09
12/23/09
12/22/09
11/13/09
12/09/09
12/10/09
11/02/09
12/09/09
10/27/09
11/16/09
11/06/09
12/10/09
12/02/09
11/07/09
11/18/09
VerDate Nov<24>2008
15:13 Mar 09, 2010
Jkt 220001
PO 00000
Chemical
(G) Hexitol, anhydro-, bis[[(1-oxo-2-propenyl)oxy]benzoate], polymer with phenylene bis[[(1-oxo-2-propenyl)oxy]alkyl(C1-C10)oxy benzoate]
(G) Hydrogenated polyalphaolefins
(G) Copolymer of acrylic acrylates, methacrylates and acid
(G) Polydimethysaline
(G) Alkanoldioic acid, dialkyl ester
(G) Mixed metal oxide complex
(G) Metal oxide complex
(G) Alkenyl succinimide
(G) 1,2,3-propanetricarboxamide derivative
(S) 1,3-cyclopentadiene, 5-butyl(G) Water-borne silicone grafted (meth)acrylic copolymer
(G) Perfluorinated aliphatic carboxylic acid
(G) Alkenoic acid polymer with (poly)hydroxy substituted alkane, ester with
acryloylcarbamic acid
(G) Urethane acrylate
(G) Urethane acrylate
(S) 2H-2,4A-methanonaphthalen-1(5H)-one, hexahydro-5,5-dimethyl(G) Surface modified ceramic particles
(G) Hydroxy-chloro-cyclopropyl-heteromonocycliccarboxylic acid
(G) Aliphatic, aromatic unsaturated bicyclic derivative
(G) Diamino - (substituted phenylazo) - benzene sulfonic acid, salt
(G)
Alkanedioic
acid,
polymer
with
N-(aminoalkyl)-alkyldiamine,
(chloromethyl)oxirane and alkylpolyol, acid salt
(G) Epoxidized siloxane
(G) Aliphatic polyurethane resin aqueous dispersion
(G) 1,3-ethyl, methylimidazolium undecafluoro substituted ionic methalic species
(G) 2-propenoic acid, polymer with butyl 2-propenoate, (2,3,4,5,6pentabromophenyl) methyl 2-propenoate and substitute acrylates
(G) Modified, saturated polyester resin
(G) Butylated melamine
(G) Substituted carboxylic acid reaction product with substituted amine and
amide, acetates
(G) Perfluoroalkylethylmethacrylate copolymer
(G) Alkanoic acid, potassium salt
(G) Furandione polymer with ethenylbenzene, alkyl ester
(G) Partially fluorinated alcohol, reaction products with phosphorus oxide
(P2O5), ammonium salts
(G) Partially fluorinated alcohol, reaction products with phosphorus oxide
(P2O5)
(G) Acrylamide-based copolymer
(G) Polyether polyester copolymer phosphate
(G) Polyacrylate, modified with siloxanes
(S) Multi-wall carbon nanotube
(G) Aryl alkylphosphonate
(G) Styrene-maleic anhydride copolymer, reaction product with amino compounds
(G) Poly(oxyalkylenediyl), a-substituted carbomonocycle-.omega.-substituted
carbomonocycle
(G) Solid epoxy resin
(G) Amine modified polyester acrylate
(G) Alkyl diphenyl ether
(G) Fatty acids, polymers with adipic acid, 1,6-hexandiol, 3-hydroxy-2(hydroxymethyl)-2-methylpropanoic
acid
and
1,1′-methylenebis[4isocyanatocyclohexane], compounds with triethylamine
(G) High molecular weight polyester
(G) Alkenyl succinic anhydride
(G) Urethane acrylate
(G) Polyester resin
(G) Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 2-(chloromethyl)oxirane,
reaction products with dithiol
(G) Mixed metal oxide complex
(S) 6,8-dimethyl-7-nonenal
(G) Butanamide, N-[substituted phenyl]-[(alkoxynitrophenyl)diazenyl]-3-oxo(G) Urethane prepolymer
(G) Polyurethane
(G) Fluoroalkyl sulfonamide
(G) Modified polyol
(G) Fluorinated polymer
(G) Fluorinated sulfonamide alcohol
(S) 2H-1,5-benzodioxepin-3 (4H)-one, 7-(1-methylethyl)-
Frm 00011
Fmt 4701
Sfmt 4703
E:\FR\FM\10MRN2.SGM
10MRN2
11414
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices
III. 117 NOTICES OF COMMENCEMENT FROM: 10/26/09 TO 1/22/10—Continued
Case No.
Commencement
Notice End Date
Received Date
P–09–0498
12/14/09
12/07/09
P–09–0499
P–09–0511
P–09–0531
P–09–0534
12/30/09
12/08/09
11/30/09
01/05/10
10/21/09
12/03/09
11/12/09
11/16/09
P–09–0536
01/05/10
11/16/09
P–09–0537
01/05/10
11/16/09
P–09–0538
01/05/10
11/16/09
P–09–0539
01/05/10
11/16/09
P–09–0544
12/10/09
12/01/09
P–09–0555
P–09–0564
P–09–0570
P–09–0572
P–09–0573
P–09–0575
11/30/09
12/07/09
12/28/09
12/23/09
12/23/09
12/18/09
11/18/09
11/20/09
12/04/09
12/10/09
12/04/09
12/13/09
P–09–0578
P–09–0581
P–09–0582
P–09–0583
P–09–0584
P–09–0585
12/18/09
12/30/09
12/30/09
01/14/10
01/14/10
12/07/09
12/13/09
12/16/09
12/16/09
12/16/09
12/16/09
11/20/09
P–09–0587
P–09–0588
12/08/09
12/08/09
11/24/09
11/25/09
P–09–0592
P–09–0598
01/13/10
12/18/09
12/22/09
12/07/09
P–09–0600
P–09–0612
P–09–0615
P–10–0003
P–10–0004
P–97–1011
P–98–0543
12/30/09
12/07/09
01/19/10
01/19/10
01/19/10
12/14/09
01/13/10
11/29/09
11/30/09
01/07/10
01/12/10
01/12/10
06/05/98
12/31/09
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: March 1, 2010.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2010–5129 Filed 3–9–10; 8:45 am]
erowe on DSK5CLS3C1PROD with NOTICES2
15:13 Mar 09, 2010
(G) Aromatic dicarboxylic acid, polymer with cycloaliphatic diamine, 2(chloromethyl)oxirane, alkyldioic acid and an aryl diphenol
(G) Aromatic polyether polymer
(G) Fluoroalkyl acrylate copolymer
(G) Acrylic solution polymer
(G) Carbamic acid, (methylenedicyclohexanediyl)bis-mixed diesters with polyethylene glycol and polyethylene glycol mono ethers
(G) Carbamic acid, (methylenedicyclohexanediyl)bis-mixed diesters with unsaturated alcohols, polyethylene glycol and polyethylene glycol mono ethers
(G) Polyethylene glycol, alpha, alpha′, alpha′′-propanetrilmonoesters with
[[[carboxyaminitrimethylcyclohexyl]methyl]amino]carbonyl]octadecenyloxy)polyethylene glycol
(G) Carbamic acid, (methylenedicyclohexanediyl)bis-mixed diesters with
isoalcohols, polyethylene glycol and polyethylene glycol mono ethers
(G) Carbamic acid, (trimethylhexanediyl)bis-mixed diesters with unsaturated alcohols, isoalcohols and polyethylene glycol
(G) Polyalkyleneglycol, reaction products with hydroxyalkyl acrylate,
dihydroxyalkyl alkanoic acid, sodium-aminoalkyl-alaninate, sodium salt
(G) Acrylate, polymer with aromatic vinyl monomer and acrylates
(G) Polyurethane prepolymer
(G) Alkyl thiol, manufacturer of, by-products from, distant heavies
(G) Alkyl thiol, manufacturer of, by-products from, distant heavies
(G) Alkyl thiol, manufacturer of, by-products from, distant residues heavies
(G) Naphthalenesulfonic acid, [(chloro-methyl-sulfophenyl)diazenyl]-hydroxymetal salt
(G) Naphthalenesulfonic acid, [(methyl-sulfophenyl)diazenyl]-hydroxy-metal salt
(G) Styrenyl surface treated manganese ferrite
(G) Acrylate polymer stabilized manganese ferrite
(G) Anthraquinone acid dye salt
(G) Copper phthalocyanine direct dye salt
(G) Polymer of aliphatic cyclic methacrylic acid and aliphatic methacrylic acid
ester
(S) Butanedioic acid, 2-methylene-, monoisooctadecyl ester
(S) Butanedioic acid, 2-methylene-, monoisooctadecyl ester, palladium(2+) salt
(2:1)
(G) Aqueous polyurethane resin dispersion
(G) Alkyl acrylic acid, polymer with alkyl acrylate alkyl ester and alkyldiyl
diacrylate
(G) Alkyl thiol, manufacturer of, by-products from, distant lights
(G) Silane treated glass
(S) Alkenes, C26-30 .alpha.-, polyoumd.
(G) Alkyl thiol, manufacturer of by-products from, distant lights
(G) Alkyl thiol, manufacturer of by-products from, distant residues
(S) Oxirane, 2,2′-(methylenebis ((2,6-dimethyl-4,1phenylene) oxymethylene))bis(G) Polyurethane with carboxy functions
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2010–0171; FRL–8814–8]
Certain New Chemicals; Receipt and
Status Information
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
BILLING CODE 6560–50–S
VerDate Nov<24>2008
Chemical
Jkt 220001
PO 00000
Frm 00012
Fmt 4701
Sfmt 4703
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from January 25, 2010
through February 12, 2010, consists of
the PMNs pending or expired, and the
notices of commencement
tomanufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before April 9,
2010.
E:\FR\FM\10MRN2.SGM
10MRN2
]]>Agencies
[Federal Register Volume 75, Number 46 (Wednesday, March 10, 2010)]
[Notices]
[Pages 11404-11414]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-5129]
[[Page 11403]]
-----------------------------------------------------------------------
Part V
Environmental Protection Agency
-----------------------------------------------------------------------
Certain New Chemicals; Receipt and Status Information; Notices
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 /
Notices
[[Page 11404]]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2010-0112; FRL-8814-1]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from October 26, 2009 through January 22, 2010, consists of the
PMNs and TME, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before April 9, 2010.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2010-0112, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2010-0112. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2010-0112. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available at https://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at https://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
Federal holidays. The telephone number of the EPA/DC Public Reading
Room is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
[[Page 11405]]
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 26, 2009 through January
22, 2010, consists of the PMNs and TME, both pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TME, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit I. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 161 Premanufacture Notices Received From: 10/26/09 to 1/22/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-10-0022 10/26/09 01/23/10 H.B. Fuller (G) Industrial (G) Isocyanate-
adhesive functional
polyurethane
prepolymer
P-10-0023 10/26/09 01/23/10 CBI (S) Pigment (G) Benzenesulfonic
derivative used in acid, 4-amino, azo
ink contained in ink pigment
jet printer
cartridges
P-10-0024 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical benzoyl chloride
substance,
destructive use
P-10-0025 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical pyrazolone
substance,
destructive use
P-10-0026 10/26/09 01/23/10 CBI (G) Precursor to (G) Salt of
another chemical condensation product
substance, of substituted
destructive use pyrazolone
P-10-0027 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical benzoic acid
substance,
destructive use
P-10-0028 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical benzoic acid
substance,
destructive use
P-10-0029 10/28/09 01/25/10 CBI (S) Acrylic polymer (G) Acrylic polymer
used in the
manufacture of
adhesive tapes
P-10-0030 10/28/09 01/25/10 PPG Industries, Inc. (G) Component of a (G) Aromatic
coating polyurethane
P-10-0031 10/28/09 01/25/10 Reichhold, Inc. (G) Flexibilizing (G) Alkanediol,
resin, non- polymer with
dispersive alkyleneamine,
isocyanate and
glycol
P-10-0032 10/27/09 01/24/10 CBI (G) Dewaxing aid (G) Alkylester,
polymer with alkyl
acrylate
P-10-0033 10/27/09 01/24/10 CBI (G) Gear oil additive (G) Aromatic
hydrogenated poly
alkyldiene
containing poly
alkyl methacrylate
P-10-0034 10/27/09 01/24/10 Firmenich Inc. (S) Aroma for use in (S) 1(2H)-
fragrance mixtures, naphthalenone,
which in turn are octahydro-2,3,81-
used in perfumes, trimethyl-, (3R,
soaps, cleansers, 4AR, 8AR)-rel-
etc.
P-10-0035 10/29/09 01/26/10 CBI (G) Conditioning (G) Sodium
agent carboxylate
P-10-0036 10/30/09 01/27/10 CBI (S) Polyester (G) Substituted
filament and staple polyethylene
terephtalate
P-10-0037 10/30/09 01/27/10 CBI (S) Flame retardant (G) Substituted
in polyester propionic acid
filament and staple
P-10-0038 11/02/09 01/30/10 CBI (S) Flame retardant (G) Heterocyclic salt
for use in adhesives
and coatings
P-10-0039 11/03/09 01/31/10 Nanocomp (G) For all (S) Carbon
Technologies, Inc. applications listed
here the field is
composite structures
for aerospace
P-10-0040 11/03/09 01/31/10 Nanocomp (G) For all (S) Carbon
Technologies, Inc. applications listed
here the field is
aerospace
P-10-0041 11/03/09 01/31/10 Huntsman Corporation (G) Dispersing agent (G) Polyether
polyacid comb
polymer
[[Page 11406]]
P-10-0042 11/03/09 01/31/10 CBI (S) Laminating (G) Polyester
adhesive polyurethane
P-10-0043 11/03/09 01/31/10 CBI (S) Coatings (G) Silicone modified
application alkyd resin
P-10-0044 11/04/09 02/01/10 Green Era Solutions (S) Fragrance (S) Extractives and
ingredient their physically
modified
derivatives.
Callitropsis
nootkatensis. Oil,
callitropsis
nootkatensis
P-10-0045 11/04/09 02/01/10 CBI (G) Adhesives (G) Solvent free
adhesives
P-10-0046 11/04/09 02/01/10 Coim USA Inc. (S) Foam insulation (S) 1,4-
benzenedicarboxylic
acid, polymer with
2,2-
bis(hydroxymethyl)-
1,3-propanediol,
hexanedioic acid,
.alpha.-hydro-
.omega.-
hydroxypoly(oxy-1,2-
ethanediyl), 1,3-
isobenzofurandione
and 2,2'-
oxybis[ethanol],
benzoate
P-10-0047 11/05/09 02/02/10 CBI (S) Curing agent for (G) Alkenoic acid, 2-
epoxy resin in methyl-, 2-
protective coatings oxiranylmethyl
ester, reaction
products with 4,4'-
methylenebis
(cyclohexanamine)
P-10-0048 11/05/09 02/02/10 CBI (G) Pigment (G) Sulfonated SMA
dispersant; drilling
fluid dispersant
P-10-0049 11/06/09 02/03/10 CBI (S) Resin for (G) Polyester
coatings for metal polyurethane
P-10-0050 11/09/09 02/06/10 CBI (G) Component in (G) Amine salts of
corrosion inhibitor fatty acids
formulation for oil
field use
P-10-0051 11/09/09 02/06/10 Cognis Corporation (S) Performance (S) Starch, 2-
additive for hard carboxyethyl 2-
surface cleaners methyl-3-oxo-3-[[3-
(trimethylammonio)pr
opyl]amino]propyl
ether, chloride
P-10-0052 11/09/09 02/06/10 CBI (G) Fuel additive (G) Aryl polyolefin
intermediate
P-10-0053 11/10/09 02/07/10 CBI (S) Reactant for the (G) Halogenated
manufacture of a aromatic amine
pesticide
P-10-0054 11/10/09 02/07/10 DIC International (G) Additive for (G) Fluorinated
(USA) LLC lubricating oil acrylic acid ester
copolymer (telomer
type)
P-10-0055 11/09/09 02/06/10 CBI (S) Ingredient in (S) Butanoic acid, 3-
fragrance compound hydroxy-, 5-methyl-2-
(1-
methylethyl)cyclohex
yl ester
P-10-0056 11/09/09 02/06/10 CBI (S) Ingredient in (S) Butanoic acid, 3-
fragrance compound mercapo-2-methyl-,
ethyl ester
P-10-0057 11/09/09 02/06/10 CBI (G) Fuel additive (G) Polyolefin aryl
amine
P-10-0058 11/12/09 02/09/10 CBI (G) Intermediate (G) Partially
fluorinated alcohol
substituted glycol
P-10-0059 11/12/09 02/09/10 CBI (G) Intermediate (G) Partially
fluorinated alcohol
substituted glycol
P-10-0060 11/12/09 02/09/10 CBI (G) Surface active (G) Partially
agent fluorinated alcohol
substituted glycol
P-10-0061 11/13/09 02/10/10 CBI (G) Chemical (G) Alkyl thiol,
intermediate - manufacture of, by-
destructive use products from,
distant lights
P-10-0062 11/13/09 02/10/10 CBI (G) Chemical (G) Alkyl thiol,
intermediate - manufacture of, by-
destructive use products from,
distant residues
P-10-0063 11/12/09 02/09/10 Mitsui Chemicals (S) Binder for toner (G) Aromatic
America, Inc. discarboxylic acid,
polymer with 1,3-
diisocyanatomethylbe
nzene, .alpha.,
.alpha'.-[(1-
methylethylidene)di-
4,1-
phenylene]bis[.omega
.-
hydroxypoly[oxy(meth
yl-1-2,
ethanediyl)]] and
2,2'-
oxybis[etehanol]
P-10-0064 11/16/09 02/13/10 CBI (G) Curing aid (G) Amidosilane
P-10-0065 11/16/09 02/13/10 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified polyurea
P-10-0066 11/16/09 02/13/10 CBI (G) Ethoxylation (G) Partially
initiator fluorinated ortho-
ester
P-10-0067 11/16/09 02/13/10 CBI (G) Used in the (G) Organotin
manufacture of compound
polyurethane foam
P-10-0068 11/17/09 02/14/10 CBI (S) Additive for (G) Sulfur silane
rubber articles
[[Page 11407]]
P-10-0069 11/17/09 02/14/10 CBI (G) Used in adhesive (G) alkyl acrylate,
products polymer with
aliphatic acid vinyl
ester, vinyl
monomer, acrylate
and hydroxyalkyl
acrylate
P-10-0070 11/17/09 02/14/10 CBI (G) Used in adhesive (G) acrylate, polymer
products with aliphatic acid
vinyl ester, vinyl
monomer and
hydroxyalkyl
acrylate
P-10-0071 11/17/09 02/14/10 CBI (G) Used in adhesive (G) alkyl acrylate,
products polymer with
aliphatic acid vinyl
ester, acrylate
hydroxyalkyl
acrylate,
alkanenitrile and
acrylate
P-10-0072 11/13/09 02/10/10 The Dow Chemical (S) Monomer inhibitor (G) Substituted
Company oxidized piperidinyl
derivative
P-10-0073 11/17/09 02/14/10 CBI (G) Hardener for (G) Blocked
industrial coatings polyisocyanate
P-10-0074 11/17/09 02/14/10 Alberdingk Boley, (S) For special metal (G) Butanoic acid, 3-
Inc. coatings oxo-, 2-[(2-methyl-1-
oxo-2-propen -1-
yl)oxy]ethyl ester,
polymer with butyl 2-
methyl-2-propenoate,
ethenylbenzene, 2-
ethylhexyl 2-
propenoate, methyl 2-
methyl-2-propenoate,
phosphoric acid, di-
ester with hydroxy
ethyl methacrylate
and 2-(phosphonooxy)
ethyl 2-methyl-2-
propenoate
P-10-0075 11/18/09 02/15/10 CBI (G) Resin for use in (G) Brominated
manufacture of aromatic polyether
reinforced composite polyester
products
P-10-0076 11/18/09 02/15/10 CBI (S) Raw material used (S) Benzene, 4-bromo-
for production of 1,2-dimethyl-
1,1-biphenyl,
3,3',4,4'-
tetramethyl
P-10-0077 11/18/09 02/15/10 CBI (G) Automotive (G) Linear hydroxy
coatings funtional polyester
P-10-0078 11/18/09 02/15/10 Dow Chemical Company (G) Adhesive (G) Capped
component polyurethane adduct
P-10-0079 11/18/09 02/15/10 CBI (G) Colorant (G) Substituted
naphthalene mixed
salt
P-10-0080 11/19/09 02/16/10 CBI (G) Adhesive (G) Mdi modified
polyester resin
P-10-0081 11/18/09 02/15/10 CBI (S) Curing agent for (G) Phenol, polymer
epoxy resin in with formaldehyde,
protective coatings glycidyl ether,
reaction products
with 5-amino-1,3,3-
trialkylcycloalkanem
ethanamine
P-10-0082 11/18/09 02/15/10 CBI (G) Multi-purpose (S) 1,2,3-
additive propanetriol,
homopolymer,
hexadecanoate
octadecanoate
P-10-0083 11/05/09 02/02/10 CBI (G) Resin component (G) Hydroxy-aryl,
polymer with
substituted benzene,
cyanate
P-10-0084 11/20/09 02/17/10 CBI (G) Dispersion (G) Carbazole violet
additive for sulfonamide derivate
printing ink
P-10-0085 11/23/09 02/20/10 CBI (G) Non-dispersive (G) Bismuth salt of
use lactic acid
P-10-0086 11/23/09 02/20/10 CBI (G) Laminate resin (G) Epoxidized
viscosity modifier benzoxazine
P-10-0087 11/23/09 02/20/10 CBI (G) Destructive use (G) Octylated phenyl-
alpha-naphthylamine
P-10-0088 11/24/09 02/21/10 Frx Polymers, Inc. (G) Frx co-polymers (G) Polyphosphonate-
are non-halogenated co-polycarbonate
polyphosphonate-co-
polycarbonate flame
retardant polymers
that address the
need to replace the
current commercial
bromine-containing
flame retardants
that are being
phased out due to
environmental
regulation. Flame
retardants are
required to meet
fire safety
standards in order
to reduce
flammability of
combustible
materials. Use
sectors are:
consumer electronics
as well as building
and construction
lighting.
P-10-0089 11/25/09 02/22/10 CBI (G) Solvent / curing (G) Dialkyl
agent imidazolium salt
[[Page 11408]]
P-10-0090 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with 1,6-
diisocyanatohexane,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0091 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with 4-
aminobenzoic acid,
1,6-
diisocyanatohexane,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0092 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with
polymethylenepolyphe
nylene isocyanate,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0093 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with 4-
aminobenzoic acid,
polymethylenepolyphe
nylene isocyanate,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0094 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products polymers with 4-
aminobenzoic acid,
1,6-
diisocyanatohexane,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0095 11/24/09 02/21/10 CBI
