Foreign-Trade Zone 21-Charleston, SC, Application for Subzone, Luigi Bormioli Corporation (Glassware), Barnwell, SC, 8651-8652 [2010-3861]
Download as PDF
<![CDATA[
Federal Register / Vol. 75, No. 37 / Thursday, February 25, 2010 / Notices
intended for the tire cord, tire bead, or
other rubber reinforcement applications
is not included in the scope. However,
should petitioners or other interested
parties provide a reasonable basis to
believe or suspect that there exists a
pattern of importation of such products
for other than those applications, end–
use certification for the importation of
such products may be required. Under
such circumstances, only the importers
of record would normally be required to
certify the end use of the imported
merchandise.
All products meeting the physical
description of subject merchandise that
are not specifically excluded are
included in this scope.
The merchandise subject to this order
are classifiable under subheadings
7213.91.3000, 7213.91.3010,
7213.91.3011, 7213.91.3015,
7213.91.3020, 7213.91.3090,
7213.91.3091, 7213.91.3092,
7213.91.3093,1 7213.91.4500,
7213.91.4510, 7213.91.4590,
7213.91.6000, 7213.91.6010,
7213.91.6090, 7213.99.0030,
7213.99.0031, 7213.99.0038,
7213.99.0090, 7227.20.0000,2
7227.20.0010, 7227.20.0020,
7227.20.0030, 7227.20.0080,
7227.20.0090, 7227.20.0095,
7227.90.6010, 7227.90.6020,
7227.90.6085, 7227.90.6050,
7227.90.6051, 7227.90.6053,
7227.90.6058, 7227.90.6059, and
7227.90.6080 of the HTSUS. Although
the HTSUS subheadings are provided
for convenience and customs purposes,
the written description of the scope of
this order is dispositive.3
Final Results of Review
The Department has determined that
the following margins exist for the
period October 1, 2007, through
September 30, 2008:
Manufacturer / Exporter
Weighted Average
Margin (percentge)
AMPL ............................
23.95
jlentini on DSKJ8SOYB1PROD with NOTICES
Assessment Rates
Pursuant to these final results, the
Department has determined, and CBP
shall assess, antidumping duties on all
appropriate entries. The Department
1 As a result of a typographical error, this HTSUS
subheading appeared as ‘‘721.39.3093’’ in the
Preliminary Results.
2 As a result of a typographical error, this HTSUS
subheading appeared as ‘‘7227.20.000’’ in the
Preliminary Results.
3 Effective July 1, 2008, U.S. Customs and Border
Protection (CBP) reclassified certain HTSUS
numbers related to the subject merchandise. See
https://www.usitc.gov/publications/docs/tata/hts/
bychapter/0810chgs.pdf.
VerDate Nov<24>2008
16:34 Feb 24, 2010
Jkt 220001
intends to issue assessment instructions
for AMPL to CBP 15 days after the date
of publication of these final results.
Pursuant to 19 CFR 351.212(b)(1), we
calculated importer–specific (or
customer–specific) ad valorem duty
assessment rates based on the ratio of
the total amount of the dumping
margins calculated for the examined
sales to the total entered value of those
same sales. We will instruct CBP to
assess antidumping duties on all
appropriate entries covered by this
review if any importer–specific (or
customer–specific) assessment rates
calculated in the final results of this
review are above de minimis.
The Department clarified its
‘‘automatic assessment’’ regulation on
May 6, 2003. See Antidumping and
Countervailing Duty Proceedings:
Assessment of Antidumping Duties, 68
FR 23954 (May 6, 2003) (Assessment of
Antidumping Duties). This clarification
will apply to entries of subject
merchandise during the POR produced
by AMPL for which AMPL did not
know the merchandise was destined for
the United States. In such instances, we
will instruct CBP to liquidate un–
reviewed entries at the 11.40 percent
all–others rate if there is no companyspecific rate for an intermediary
involved in the transaction. See Notice
of Antidumping Duty Orders: Carbon
and Certain Alloy Steel Wire Rod from
Brazil, Indonesia, Mexico, Moldova,
Trinidad and Tobago, and Ukraine, 67
FR 65945, 65947 (October 29, 2002)
(Wire Rod Orders) (establishing an all–
others rate of 11.40 percent). See
Assessment of Antidumping Duties for a
full discussion of this clarification.
Cash Deposit Requirements
Furthermore, the following deposit
requirements will be effective upon
publication of these final results for all
shipments of wire rod from Trinidad
and Tobago entered, or withdrawn from
warehouse, for consumption on or after
the publication date of the final results
of this administrative review, as
provided by section 751(a)(1) of the
Tariff Act of 1930, as amended (the Act):
(1) the cash deposit rate for AMPL will
be the rate established in the final
results of review; (2) if the exporter is
not a firm covered in this review or the
less–than-fair–value (LTFV)
investigation, but the manufacturer is,
the cash deposit rate will be the rate
established for the most recent period
for the manufacturer of the
merchandise; and (3) if neither the
exporter nor the manufacturer is a firm
covered in this or any previous review
conducted by the Department, the cash
deposit rate will be the all–others rate
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
8651
of 11.40 percent ad valorem from the
LTFV investigation. See Wire Rod
Orders at 65947. These deposit
requirements, when imposed, shall
remain in effect until further notice.
Reimbursement of Duties
This notice also serves as a final
reminder to importers of their
responsibility under 19 CFR
351.402(f)(2) to file a certificate
regarding the reimbursement of
antidumping duties prior to liquidation
of the relevant entries during this POR.
Failure to comply with this requirement
could result in the Secretary’s
presumption that reimbursement of
antidumping duties occurred and the
subsequent assessment of doubled
antidumping duties. See 19 CFR
351.402(f)(3).
Administrative Protective Orders
This notice also serves as a reminder
to parties subject to administrative
protective orders (APO) of their
responsibility concerning the return or
destruction of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305(a)(3), which
continues to govern business
proprietary information in this segment
of the proceeding. Timely written
notification of the return/destruction of
APO materials or conversion to judicial
protective order is hereby requested.
Failure to comply with the regulations
and terms of an APO is a violation
which is subject to sanction.
We are issuing and publishing this
notice in accordance with sections
751(a)(1) and 777(i) of the Act.
Dated: February 19, 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import
Administration.
[FR Doc. 2010–3884 Filed 2–24–10; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 10–2010]
Foreign-Trade Zone 21—Charleston,
SC, Application for Subzone, Luigi
Bormioli Corporation (Glassware),
Barnwell, SC
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by the South Carolina State Ports
Authority, grantee of FTZ 21, requesting
special-purpose subzone status for the
warehousing and distribution facility of
Luigi Bormioli Corporation (Luigi
Bormioli), located in Barnwell, South
Carolina. The application was submitted
E:\FR\FM\25FEN1.SGM
25FEN1
jlentini on DSKJ8SOYB1PROD with NOTICES
8652
Federal Register / Vol. 75, No. 37 / Thursday, February 25, 2010 / Notices
pursuant to the provisions of the
Foreign-Trade Zones Act, as amended
(19 U.S.C. 81a–81u), and the regulations
of the Board (15 CFR part 400). It was
formally filed on February 16, 2010.
The Luigi Bormioli facility (35
employees, 19 acres, $11.5 million in
annual shipments) is located at 1656
Fuldner Rd. (Joey Zorn Blvd.), Barnwell,
South Carolina. The facility is used for
the storage and distribution of glass
fragrance containers and glass tableware
products (duty rate ranges from 3 to
38%).
FTZ procedures could exempt Luigi
Bormioli from customs duty payments
on foreign products that are re-exported
(approximately 2 percent of shipments).
On its domestic sales, the company
would be able to defer duty payments
until merchandise is shipped from the
plant and entered for consumption. FTZ
designation would further allow Luigi
Bormioli to realize logistical benefits
through the use of weekly customs entry
procedures. The request indicates that
the savings from FTZ procedures would
help improve the facility’s international
competitiveness.
In accordance with the Board’s
regulations, Maureen Hinman of the
FTZ Staff is designated examiner to
evaluate and analyze the facts and
information presented in the application
and case record and to report findings
and recommendations to the Board.
Public comment is invited from
interested parties. Submissions (original
and 3 copies) shall be addressed to the
Board’s Executive Secretary at the
address below. The closing period for
their receipt is April 26, 2010. Rebuttal
comments in response to material
submitted during the foregoing period
may be submitted during the subsequent
15-day period to May 11, 2010.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room 2111,
U.S. Department of Commerce, 1401
Constitution Avenue, NW., Washington,
DC 20230–0002, and in the ‘‘Reading
Room’’ section of the Board’s Web site,
which is accessible via www.trade.gov/
ftz.
For further information, contact
Maureen Hinman at
maureen.hinman@trade.gov or (202)
482–0627.
Dated: February 16, 2010.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2010–3861 Filed 2–24–10; 8:45 am]
BILLING CODE P
VerDate Nov<24>2008
16:34 Feb 24, 2010
Jkt 220001
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 11–2010]
Foreign-Trade Zone 59—Lincoln, NE
Application for Subzone CNH America,
LLC (Agricultural Machinery
Manufacturing) Grand Island, NE
An application has been submitted to
the Foreign-Trade Zones Board (the
Board) by the Lincoln Foreign Trade
Zone, Inc., grantee of FTZ 59, requesting
special-purpose subzone status for the
agricultural combine and hay tools
manufacturing facilities of CNH
America, LLC (CNH), located in Grand
Island, Nebraska. The application was
submitted pursuant to the provisions of
the Foreign-Trade Zones Act, as
amended (19 U.S.C. 81a–81u), and the
regulations of the Board (15 CFR part
400). It was formally filed on February
16, 2010.
The CNH facilities (1,274 employees)
consist of two sites in Grand Island,
Nebraska on approximately 171.5 acres:
Site 1 (132.52 acres)—main plant
located at 3445 W. Stolley Park Road;
and Site 2 (38.93 acres)—warehouse
located at 1011 Claude Road. The
facilities are used for the manufacture,
testing, warehousing and distribution of
combines and hay tools. The CNH
facilities annually can produce up to
5,960 combines and 4,600 hay tools.
Components and materials sourced from
abroad (representing 10% of the value of
the finished product) include: Articles
of plastic (incl. tubes, hoses, fittings,
stoppers and lids); articles of rubber
(incl. belts, tubes, hoses, grommets,
plugs, mountings, sheets, strips); tires;
gaskets; washers; safety glass; iron
tubes; pipes and fittings; cable;
fasteners; springs; articles of steel; sign
plates; internal-combustion engines and
parts; pumps; filters; parts for
agricultural equipment; valves; bearings;
transmission shafts; electric motors;
generators; clutches; brakes; ignitions;
electromagnetic couplings; gears;
flywheels; pulleys; electrical lighting or
signaling equipment; loudspeakers;
heaters; defrosters; resistors; switches;
relays; lamps; wires; cables; locks and
keys; thermostats and measuring
instruments (duty rates range from free
to 9%).
FTZ procedures could exempt CNH
from customs duty payments on the
foreign components used in export
production. The company anticipates
that some 30 percent of the plant’s
shipments will be exported. On its
domestic sales, CNH would be able to
choose the duty rates during customs
entry procedures that apply to combines
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
and hay tools (duty-free) for the foreign
inputs noted above. FTZ designation
would further allow CNH to realize
logistical benefits through the use of
certain customs entry procedures. The
request indicates that the savings from
FTZ procedures would help improve
the plant’s international
competitiveness.
In accordance with the Board’s
regulations, Diane Finver of the FTZ
Staff is designated examiner to evaluate
and analyze the facts and information
presented in the application and case
record and to report findings and
recommendations to the Board.
Public comment is invited from
interested parties. Submissions (original
and 3 copies) shall be addressed to the
Board’s Executive Secretary at the
address below. The closing period for
their receipt is April 26, 2010. Rebuttal
comments in response to material
submitted during the foregoing period
may be submitted during the subsequent
15-day period to May 11, 2010.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room 2111,
U.S. Department of Commerce, 1401
Constitution Avenue, NW., Washington,
DC 20230–0002, and in the ‘‘Reading
Room’’ section of the Board’s Web site,
which is accessible via www.trade.gov/
ftz.
For further information, contact Diane
Finver at Diane.Finver@trade.gov or
(202) 482–1367.
Dated: February 16, 2010.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2010–3883 Filed 2–24–10; 8:45 am]
BILLING CODE P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XT57
Incidental Takes of Marine Mammals
During Specified Activities; Marine
Geophysical Survey in the
Commonwealth of the Northern
Mariana Islands, April to June 2010
AGENCY: National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice; proposed incidental take
authorization; request for comments.
SUMMARY: NMFS has received an
application from the Lamont-Doherty
Earth Observatory (L–DEO), a part of
E:\FR\FM\25FEN1.SGM
25FEN1
]]>Agencies
[Federal Register Volume 75, Number 37 (Thursday, February 25, 2010)]
[Notices]
[Pages 8651-8652]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-3861]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 10-2010]
Foreign-Trade Zone 21--Charleston, SC, Application for Subzone,
Luigi Bormioli Corporation (Glassware), Barnwell, SC
An application has been submitted to the Foreign-Trade Zones Board
(the Board) by the South Carolina State Ports Authority, grantee of FTZ
21, requesting special-purpose subzone status for the warehousing and
distribution facility of Luigi Bormioli Corporation (Luigi Bormioli),
located in Barnwell, South Carolina. The application was submitted
[[Page 8652]]
pursuant to the provisions of the Foreign-Trade Zones Act, as amended
(19 U.S.C. 81a-81u), and the regulations of the Board (15 CFR part
400). It was formally filed on February 16, 2010.
The Luigi Bormioli facility (35 employees, 19 acres, $11.5 million
in annual shipments) is located at 1656 Fuldner Rd. (Joey Zorn Blvd.),
Barnwell, South Carolina. The facility is used for the storage and
distribution of glass fragrance containers and glass tableware products
(duty rate ranges from 3 to 38%).
FTZ procedures could exempt Luigi Bormioli from customs duty
payments on foreign products that are re-exported (approximately 2
percent of shipments). On its domestic sales, the company would be able
to defer duty payments until merchandise is shipped from the plant and
entered for consumption. FTZ designation would further allow Luigi
Bormioli to realize logistical benefits through the use of weekly
customs entry procedures. The request indicates that the savings from
FTZ procedures would help improve the facility's international
competitiveness.
In accordance with the Board's regulations, Maureen Hinman of the
FTZ Staff is designated examiner to evaluate and analyze the facts and
information presented in the application and case record and to report
findings and recommendations to the Board.
Public comment is invited from interested parties. Submissions
(original and 3 copies) shall be addressed to the Board's Executive
Secretary at the address below. The closing period for their receipt is
April 26, 2010. Rebuttal comments in response to material submitted
during the foregoing period may be submitted during the subsequent 15-
day period to May 11, 2010.
A copy of the application will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 2111, U.S. Department of Commerce, 1401 Constitution Avenue, NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Maureen Hinman at
maureen.hinman@trade.gov or (202) 482-0627.
Dated: February 16, 2010.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2010-3861 Filed 2-24-10; 8:45 am]
BILLING CODE P
