Certain New Chemicals; Receipt and Status Information, 51586-51592 [E9-23934]
Download as PDF
<![CDATA[
51586
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
I. 54 PREMANUFACTURE NOTICES RECEIVED FROM: 8/17/09 TO 9/4/09—Continued
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
P–09–0617
09/04/09
12/02/09
CBI
P–09–0618
09/04/09
12/02/09
P–09–0619
09/04/09
12/02/09
P–09–0620
09/04/09
12/02/09
P–09–0621
09/04/09
12/02/09
P–09–0622
09/04/09
12/02/09
P–09–0623
09/04/09
12/02/09
The Dow Chemical
Company
The Dow Chemical
Company
The Dow Chemical
Company
The Dow Chemical
Company
The Dow Chemical
Company
The Dow Chemical
Company
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(G) Unsaturated polyester resin for
filled and fiber reinforced composites
(S) Polymer for production of
polyurea articles
(S) Polymer for production of
polyurea articles
(S) Polymer for production of
polyurea articles
(S) Polymer for production of
polyurea articles
(S) Polymer for production of
polyurea articles
(S) Polymer for production of
polyurea articles
(G) Unsaturated polyester polyol
(G) MDI polyureau prepolymer
(G) MDI polyureau prepolymer
(G) MDI polyureau prepolymer
(G) MDI polyureau prepolymer
(G) MDI polyureau prepolymer
(G) MDI polyureau prepolymer
CBI) on the Notices of Commencement
to manufacture received:
II. 16 NOTICES OF COMMENCEMENT FROM: 8/17/09 TO 9/4/09
Case No.
Commencement
Notice End Date
Received Date
P–04–0269
P–05–0613
P–07–0070
P–08–0093
P–08–0256
09/01/09
08/14/09
08/18/09
08/18/09
09/02/09
08/17/09
07/17/09
07/28/09
08/01/09
08/04/09
P–08–0485
P–08–0687
08/18/09
08/27/09
08/12/09
08/18/09
P–08–0733
P–09–0235
P–09–0237
P–09–0276
P–09–0290
P–09–0315
P–09–0320
P–09–0330
P–09–0337
08/26/09
08/27/09
08/26/09
09/02/09
08/20/09
08/26/09
08/28/09
09/02/09
08/19/09
07/26/09
07/28/09
08/10/09
08/19/09
08/05/09
07/27/09
08/14/09
08/28/09
08/06/09
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: September 24, 2009.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E9–23936 Filed 10–6–09; 8:45 am]
erowe on DSK5CLS3C1PROD with NOTICES
15:25 Oct 06, 2009
(G) Mixed metal oxide
(G) Bisphenol S mono ester
(G) MDI and polymeric mdi prepolymer
(G) Aromatic polyester polyol
(S) Fatty acids, C16–18 and C18-unsaturated, me esters, epoxidized, polymers
with ethylene glycol
(G) Isocyanate functional polyester polyether urethane polymer
(G) First substance: Amines, polyethylenepoly-, reaction products with
isostearic acid and disubstituted methanal; Second substance: Alkylamide, N(2-ethylhexyl)(G) A multi-walled carbon nanotube
(G) Aspartic ester resin
(G) Formaldehyde, polymers with alkylphenol, branched and alkylamine
(G) Aliphatic diol polymer with isocyanates and acrylates
(G) Solid epoxy resin
(G) Modified (poly) lactic acid
(G) Silsesquioxanes
(G) Substituted butyric propionic acid copolymer
(G) Polyol, polyester polyol
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2009–0741; FRL–8793–7]
Certain New Chemicals; Receipt and
Status Information
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
BILLING CODE 6560–50–S
VerDate Nov<24>2008
Chemical
Jkt 220001
PO 00000
Frm 00037
Fmt 4703
Sfmt 4703
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from July 1, 2009
through August 14, 2009, consists of the
PMNs pending or expired, and the
notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the
specific PMN number or TME number,
E:\FR\FM\07OCN1.SGM
07OCN1
erowe on DSK5CLS3C1PROD with NOTICES
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
must be received on or before November
6, 2009.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2009–0741, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2009–0741.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2009–0741. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
VerDate Nov<24>2008
15:25 Oct 06, 2009
Jkt 220001
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
website to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone number
of the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
PO 00000
Frm 00038
Fmt 4703
Sfmt 4703
51587
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
E:\FR\FM\07OCN1.SGM
07OCN1
51588
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from July 1, 2009
through August 14, 2009, consists of the
PMNs pending or expired, and the
notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
pending or expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period. If you are interested in
information that is not included in the
following tables, you may contact EPA
as described in Unit I. to access
additional non-CBI information that
may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 7/1/09 TO 8/14/09
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) 3′H-cyclopropacal- bopolycle3′butanoic acid. 3′-phenyl-, methyl
ester; 3′H-cyclopropacarbopolycyle3’ butanoic acid, 3’- phenyl-, methyl
ester
(G)
Sulfo-substituted
metal
heteropolycycle-mixed
sodium,
alkanolamine salt
(G)
Sulfo-substituted
metal
heteropolycycle-mixed
sodium,
alkanolamine salt
(G)
Sulfo-substituted
metal
heteropolycycle-mixed
sodium,
alkanolamine salt
(G) Polyurea isocyanate
(G) Polyurea isocyanate
(G) Polyurea isocyanate
(G) Polyurea isocyanate
(G) Fluoroalkyl sulfonamide
(G) Modified polyol
(S) Benzoic acid, 4-(dimethylamino)-,
1,1′-[(methylimino)di-2, 1-ethanedyl]
ester
06/11/09
09/08/09
CBI
(G) a polymer in an encapsulated
photovultaic module
P–09–0470
06/30/09
09/27/09
The Dow Chemical
Company
(G) Gas treatment agent, contained
use
P–09–0471
06/30/09
09/27/09
The Dow Chemical
Company
(G) Gas treatment agent, contained
use
P–09–0472
06/30/09
09/27/09
The Dow Chemical
Company
(G) Gas treatment agent, contained
use
P–09–0473
P–09–0474
P–09–0475
P–09–0476
P–09–0477
P–09–0478
P–09–0479
06/30/09
06/30/09
06/30/09
06/30/09
07/01/09
07/01/09
06/25/09
09/27/09
09/27/09
09/27/09
09/27/09
09/28/09
09/28/09
09/22/09
PPG Industries, Inc.
PPG Industries, Inc.
PPG Industries, Inc.
PPG Industries, Inc.
3M Company
PPG Industries, Inc.
Lamberti USA, Inc.
P–09–0480
06/25/09
09/22/09
Lamberti USA, Inc.
P–09–0481
P–09–0482
07/01/09
07/01/09
09/28/09
09/28/09
3M Company
CBI
P–09–0483
07/02/09
09/29/09
CBI
P–09–0484
erowe on DSK5CLS3C1PROD with NOTICES
P–09–0416
07/02/09
09/29/09
CBI
P–09–0485
P–09–0486
P–09–0487
P–09–0488
07/01/09
07/02/09
07/02/09
07/02/09
09/28/09
09/29/09
09/29/09
09/29/09
3M Company
CBI
CBI
CBI
(G) Component of a coating
(G) Component of a coating
(G) Component of a coating
(G) Component of a coating
(G) Fluorinated intermediate
(G) Component of a coating
(S) Co-photoinitiator for ultra violetcurable pigmentated inks; cophotoinitiator for photoresists, optical fibers and printed plates; cophotoinitiator for ultra violet-curable
coatings; co-photoinitiator for ultra
violet-curable adhesives and other
coatings; non dispersive use
(S) Co-photoinitiator for ultra violetcurable pigmentated inks; cophotoinitiator for photoresists, optical fibers and printed plates; cophotoinitiator for ultra violet-curable
coatings; co-photoinitiator for ultra
violet-curable adhesives and other
coatings; non dispersive use
(S) Protector for textile
(S) Dispersed rosin size for sizing of
paper and paperboard
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Fluorinated intermediate
(G) Lubricant additive
(G) Emulsifier
(G) Component of consumer product
P–09–0489
07/02/09
09/29/09
Firmenich Inc.
P–09–0490
07/06/09
10/03/09
Firmenich Inc.
VerDate Nov<24>2008
15:25 Oct 06, 2009
Jkt 220001
PO 00000
Frm 00039
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
Fmt 4703
Sfmt 4703
E:\FR\FM\07OCN1.SGM
(S) 1-propanone, 1,1′ (oxydi-4, 1phenylene) bis [2-hydroxy-2-methyl-
(G) Fluorinated polymer
(G) Rosin, maleic anhydride, amine
resin
(G) Polyether modified polyamine
(G) Polyether modified polyamine
(G) Fluorinated sulfonamide alcohol
(G) Polyalkenyl, N,N′-bistriazole
(G) Organic phosphate esters
(G) Substituted acrylic acid maleic anhydride copolymer
(S) Definition: Extractives and their
physically modified derivatives.
Periploca sepium.
(S) 2H-1,5-benzodioxepin-3 (4h)-one,
7-(1-methylethyl)-
07OCN1
51589
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 7/1/09 TO 8/14/09—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
07/06/09
10/03/09
Forests Pacific Biochemicals Corporation
(S) Fragrance ingredient
P–09–0492
07/08/09
10/05/09
CBI
(G) Sealant; adhesive
P–09–0493
07/08/09
10/05/09
CBI
(G) Sealant; adhesive
P–09–0494
07/08/09
10/05/09
CBI
(G) Sealant; adhesive
P–09–0495
07/08/09
10/05/09
CBI
(G) Sealant; adhesive
P–09–0496
07/08/09
10/05/09
CBI
(G) Sealant; adhesive
P–09–0497
07/09/09
10/06/09
Nanocyl Corporation,
a Georgia Corporation
P–09–0498
07/10/09
10/07/09
CBI
(S) Additivies to improve electrical,
thermal and/or mechanical properties of thermoplastic, thermoset
and coating materials
(S) Part of a two-component gravure
ink and overprinting lacquer system
P–09–0499
07/13/09
10/10/09
CBI
P–09–0500
07/14/09
10/11/09
CBI
(S) Raw material used in fuel cell
plications.
(S) Fluorescent whitening agent
uncoated paper (formulation
Fluorescent whitening agent
coated paper (formulation 2).
P–09–0501
07/14/09
10/11/09
CBI
(G) Hole injection layer in a polymeric
photovoltaic module.
P–09–0502
P–09–0503
P–09–0504
P–09–0505
P–09–0506
07/14/09
07/15/09
07/15/09
07/15/09
07/14/09
10/11/09
10/12/09
10/12/09
10/12/09
10/11/09
CBI
CBI
CBI
CBI
Coim USA Inc.
(G) Open, non-dispersive use
(G) Polymerization feedstock
(G) Carpet treatment additive
(G) Coatings
(S) Form insulation board
P–09–0507
P–09–0508
P–09–0509
P–09–0510
P–09–0511
P–09–0512
07/15/09
07/15/09
07/15/09
07/16/09
07/16/09
07/16/09
10/12/09
10/12/09
10/12/09
10/13/09
10/13/09
10/13/09
Essential Industries
Essential Industries
Essential Industries
CBI
CBI
Gelest, Inc.
(S) Raw material for industrial coating
(S) Raw material for industrial coating
(S) Raw material for industrial coating
(G) Paper treatment additive
(G) Paper treatment additive
(S) Automotive part coating; research
P–09–0513
07/17/09
10/14/09
CBI
P–09–0514
07/17/09
10/14/09
Coim USA Inc.
(S) Fixative for cellulose based substrates in paper manufacturing industry
(S) Packaging adhesives
P–09–0515
07/16/09
10/13/09
Kuraray America, Inc.
(S) Lubricants; dispersants; adhesives
P–09–0516
erowe on DSK5CLS3C1PROD with NOTICES
P–09–0491
07/20/09
10/17/09
CBI
(S) Part of two-component gravure
inks and overprinting lacquers
P–09–0517
P–09–0518
P–09–0519
07/21/09
07/22/09
07/24/09
10/18/09
10/19/09
10/21/09
Essential Industries
CBI
CBI
(S) Raw material for industrial coating
(G) Paper processing aid
(G) Latent hardener curing agent for
one and two component polyurethane products
VerDate Nov<24>2008
15:25 Oct 06, 2009
Jkt 220001
PO 00000
Frm 00040
Fmt 4703
Sfmt 4703
apfor
1).
for
E:\FR\FM\07OCN1.SGM
(S) Definition: Extractives and their
physically modified derivatives.
callitropsis
nootkatensis.
Oil,
Callitropsis nootkatensis
(G) Isocyanate polymer, amine
blocked
(G) Isocyanate polymer, amine
blocked
(G) Isocyanate polymer, amine
blocked
(G) Isocyanate polymer, amine
blocked
(G) Isocyanate polymer, amine
blocked
(S) Short tangled multi-wall carbon
nanotubes obtained by catalytical
chemical vapour deposition
(G) Aromatic dicarboxylic acid, polymer with cycloaliphatic diamine, 2(chloromethyl)oxirane,
alkyldioic
acid and an aryl diphenol
(G) Aromatic polyether polymer
(G) 1,4-benzenedisulfonic acid, 2,2′[1,2-ethenediylbis[(3-sulfo-4,1-phenylene)imino[6-[bis(alkanol)amino]1,3,5-triazine-4,2-diyl]imino]]bis-,
hexasodium salt
(G) Hetromonocyclic[3,4-b]thiophene,
homopolymer, 2-[1-difluoro[(1,2,2trifluoroethenyl)oxy]methyl]-1,2,2,2tetrafluoroethoxy]-1,1,2,2tetrafluoroethyoxy]-1,1,2,2tetrafluoroethanesulfonic acid-tetrafluoroethylene polymer-doped
(G) Blocked aromatic isocyanate
(G) Fluoromaleate
(G) Fluoroalkyl acrylate copolymer
(G) Aliphatic urethane acrylate
(S) Hexanedioic acid, polymer with
oxybis[propanol]
and
1,2,3,propanetriol
(G) Aliphatic polyurethane dispersion
(G) Aliphatic polyurethane dispersion
(G) Aliphatic polyurethane dispersion
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(S)
Silane,
dichlorodimethyl-,
homopolymer
(G)
Aminoalkyl
polymer
with
(chloromethyl)oxirane
(S) Hexanedioic acid, polymer with 2methyl-1,3-propanediol
(S) 2,5-furandione, polymer with 2methyl-1-propene, amide, ammonium salt
(G) Fatty acids, C16–18 and C18-unsaturated, polymer with alkyldioic
acid, cycloalkylamine, aromatic diol,
C18-unsaturated fatty acid dimers,
epichlorohydrin, an aromatic acid
and triethylenetetramine
(G) Aliphatic polyurethane dispersion
(G) Furandione derivative
(G) Aromatic bis-oxalolidine
07OCN1
51590
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 7/1/09 TO 8/14/09—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
07/24/09
07/27/09
10/21/09
10/24/09
CBI
CBI
P–09–0522
07/27/09
10/24/09
P–09–0523
07/27/09
10/24/09
P–09–0524
P–09–0525
P–09–0526
P–09–0527
07/29/09
07/29/09
07/28/09
07/28/09
10/26/09
10/26/09
10/25/09
10/25/09
The Dow Chemical
Company
The Dow Chemical
Company
CBI
Huntsman Corporation
Huntsman Corporation
CBI
P–09–0528
P–09–0529
P–09–0530
07/30/09
07/30/09
07/30/09
10/27/09
10/27/09
10/27/09
CBI
CBI
Forbo Adhesives, LLC
(G) Rubber additive
(G) Open, non-dispersive use.
(G) Hot melt polyurethane adhesive
P–09–0531
07/30/09
10/27/09
CBI
P–09–0532
P–09–0533
07/30/09
07/27/09
10/27/09
10/24/09
CBI
Wacker Chemical Corporation
(G) Acrylic pressure sensitive adhesive
(G) Sealant
(S) Adhesion promoter
P–09–0534
07/29/09
10/26/09
CBI
(G) Open, non-dispersive use (waterborne coatings systems)
P–09–0535
P–09–0536
08/03/09
07/29/09
10/31/09
10/26/09
CBI
CBI
(S) Synthetic intermediate
(G) Open, non-dispersive use (waterborne coatings systems)
P–09–0537
07/29/09
10/26/09
CBI
(G) Open, non-dispersive use (waterborne coatings systems)
P–09–0538
07/29/09
10/26/09
CBI
(G) Open- non-dispersive use (waterborne coatings systems)
P–09–0539
07/29/09
10/26/09
CBI
(G) Open, non-dispersive use (waterborne coatings systems)
P–09–0540
08/03/09
10/31/09
CBI
(S) Synthetic intermediate
P–09–0541
08/03/09
10/31/09
CBI
P–09–0542
08/03/09
10/31/09
CBI
P–09–0543
P–09–0544
erowe on DSK5CLS3C1PROD with NOTICES
P–09–0520
P–09–0521
08/05/09
08/04/09
11/02/09
11/01/09
CBI
CBI
(S) A semiconductor host material for
oled devices
(S) Uses per FFDCA: Food / flavors;
fragrance material in cosmetics;
Uses per TSCA: Fragrance uses;
scented papers, detergents, candles, etc.
(G) Coatings
(G) Coating raw material
P–09–0545
08/04/09
11/01/09
P–09–0546
08/04/09
11/01/09
Dic International
(USA) LLC
CBI
VerDate Nov<24>2008
15:25 Oct 06, 2009
Jkt 220001
PO 00000
Frm 00041
Chemical
(G) Coating
(G) Functional fluid, plasticiser, solvent
(G) Surfactant
(G) Silane polymer mixture
(G) Dialkyl imidazolium salt
(G) Surfactant
(G) Ethoxylated, butoxylated alcohol
(G) Chemical intermediate
(G) Coatings
(G) Coatings
(S) Hardener for two-part coating systems
(G) Aromatic polyester
(G) Hydroxyamino aryl amine
(G) Hydroxyamino aryl triamine
(G) Fatty acids, polymer with an aromatic diol, C18-unsaturated fatty
acids dimers, epichlorohydrin and
triethylenetetramine
(G) Vinylsilane
(G) Diacid, half ester
(G) Isocyanate functional polyester
polyether urethane polymer
(G) Acrylic solution polymer
(G) Additive for lubricating oil
(G) Intermediate
Fmt 4703
Sfmt 4703
E:\FR\FM\07OCN1.SGM
(G) Ethoxylated, butoxylated alcohol
(G) Bisurea compound
(S) Siloxanes and silicones, me hydrogen,
me
3-(2oxiranylmethoxy)propyl,
ethoxyand methoxy-terminated
(G)
Carbamic
acid,
(methylenedicyclohexanediyl)bismixed diesters with polyethylene
glycol and polyethylene glycol
mono ethers
(G) Aromatic hydrocarbon
(G)
Carbamic
acid,
(methylenedicyclohexanediyl)bismixed diesters with unsaturated alcohols, polyethylene glycol and polyethylene glycol mono ethers
(G) Polyethylene glycol, alpha, alpha′,
alpha′′-propanetrilmonoesters with
[[[carboxyaminitrimethylcyclohexyl]methyl]amino]carbonyl]octadecenyloxy)polyethylene glycol
(G)
Carbamic
acid,
(methylenedicyclohexanediyl)bismixed diesters with isoalcohols,
polyethylene glycol and polyethylene glycol mono ethers
(G)
Carbamic
acid,
(trimethylhexanediyl)bis-mixed
diesters with unsaturated alcohols,
isoalcohols and polyethylene glycol
(G) Halogenated aromatic hydrocarbon
(G) Aromatic heterocycle
(S) 3-nonen-1-ol, 1-acetate, (3Z)-
(G) Aromatic urethane acrylate
(G) Polyalkyleneglycol, reaction products with hydroxyalkyl acrylate,
dihydroxyalkyl alkanoic acid, sodium-aminoalkyl-alaninate, sodium
salt
(G) Fluorinated acrylic ester copolymer (telomer type)
(G) Formaldehyde reaction products
with aromatic amine
07OCN1
51591
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
I. 100 PREMANUFACTURE NOTICES RECEIVED FROM: 7/1/09 TO 8/14/09—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
08/04/09
11/01/09
CBI
(G) Lubricant additive
P–09–0548
08/07/09
11/04/09
CBI
P–09–0549
08/07/09
11/04/09
CBI
P–09–0550
08/07/09
11/04/09
CBI
P–09–0551
08/07/09
11/04/09
CBI
P–09–0552
08/10/09
11/07/09
Henkel Corporation
P–09–0553
P–09–0554
08/10/09
08/10/09
11/07/09
11/07/09
CBI
Dynamic Fuels LLC c/
o Syntroleum Corporation
(G) Intermediate in the production of
a commercial product
(G) Intermediate in the production of
a commercial product
(G) Intermediate in the production of
a commercial product
(G) Intermediate in the production of
a commercial product
(S) A site limited starting material in
novel polymer synthesis reactions
(G) Flame retardant polymer additive
(S) Renewable diesel fuel to be
blended with petroleum-derived diesel
P–09–0555
08/11/09
11/08/09
CBI
(G) Dispersing resin
P–09–0556
08/10/09
11/07/09
CBI
P–09–0557
08/10/09
11/07/09
CBI
P–09–0558
08/10/09
11/07/09
CBI
P–09–0559
P–09–0560
P–09–0561
P–09–0562
08/11/09
08/11/09
08/11/09
08/12/09
11/08/09
11/08/09
11/08/09
11/09/09
CBI
CBI
CBI
CBI
(G) Monomers for polymers and oligo
ester; additive for cleaning products
and / or plastics
(G) Monomers for polymers and oligo
ester; additive for cleaning products
and / or plastics
(G) Additive for cleaning products and
/ or plastics
(G) Treating agent
(S) Intermediate
(S) Silane coupling agent
(G) Oilfield polymer
P–09–0563
08/12/09
11/09/09
Interfacial solutions
P–09–0564
P–09–0565
08/10/09
08/11/09
11/07/09
11/08/09
CBI
CBI
P–09–0566
P–09–0567
08/13/09
08/13/09
11/10/09
11/10/09
P–09–0568
erowe on DSK5CLS3C1PROD with NOTICES
P–09–0547
08/14/09
11/11/09
CBI
Angus Chemical Company, a subsidiary
of the Dow Chemical Company
CBI
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
VerDate Nov<24>2008
15:25 Oct 06, 2009
Jkt 220001
(S) Interior building materials; injection molded goods - electronics
(G) Lamination adhesive
(G) Chemical for use in paper making
(G) Open, non-dispersive use.
(G) Radical scavenger
(S) Aerospace structural adhesive
filler / syntatic system
Chemical
(G) Formaldehyde, reaction products
with aromatic amine and alkenyl
anhydride
(G) Alkyl thiol, manufacturer of, byproducts from, distant lights
(G) Alkyl thiol, manufacturer of, byproducts from, distant residues
(G) Alkyl thiol, manufacturer of, byproducts from, distant lights
(G) Alkyl thiol, manufacturer of, byproducts from, distant residues
(S)
Benzene,
1,3-bis(1-chloro-1methylethyl)(G) Metal phosphinate
(S) Fuels, diesel C8-C18 alkane
branched and linear definition: A
complex combination of hydrocarbons
obtained
by
the
hydrodeoxygenation and catalytic
hydroisomerization of animal fats
and vegetable oils followed by
distillative fractionation. It consists
predominantly of branched and linear paraffins having carbon numbers in the range of C9 to C18 and
boiling in the range of 179c to 309c
(354.2f to 588.3f) fuels, diesel,
C9–18-alkane branched and linear
(G) Acrylate, polymer with aromatic
vinyl monomer and acrylates
(G) Modified ketal
(G) Modified ketal
(G) Modified ketal
(G) Alkoxysilane
(G) Chloroalkoxysilane
(G) Alkoxysilane
(G) Polymer of acrylamido alkyl propane sulfonic acid sodium salt and
two acrylic monomers.
(G) Modified (poly) lactic acid
(G) Polyurethane prepolymer
(G) Hydrophobically modified cationic
polyamide resin
(G) Polysiloxane epoxy polymer
(G) Hydroxylamine derivative
(G) Formaldehyde, polymer with 2(chloromethyl)oxirane,
polyoxyalkane, and phenols
CBI) on the Notices of Commencement
to manufacture received:
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
E:\FR\FM\07OCN1.SGM
07OCN1
51592
Federal Register / Vol. 74, No. 193 / Wednesday, October 7, 2009 / Notices
II. 43 NOTICES OF COMMENCEMENT FROM: 7/1/09 TO 8/14/09
Case No.
Commencement
Notice End Date
Received Date
P–05–0668
P–06–0325
P–06–0560
P–07–0015
07/23/09
07/22/09
07/16/09
07/29/09
07/03/09
06/19/09
06/23/09
03/16/09
P–07–0016
P–08–0135
P–08–0137
P–08–0206
P–08–0316
P–08–0317
P–08–0393
P–08–0410
P–08–0476
P–08–0504
P–08–0505
07/06/09
07/14/09
07/28/09
07/24/09
07/15/09
07/15/09
07/30/09
07/28/09
07/21/09
07/14/09
07/08/09
06/08/09
07/06/09
06/22/09
06/29/09
07/08/09
07/08/09
07/15/09
06/25/09
09/23/08
06/15/09
06/19/09
P–08–0546
P–08–0682
P–08–0751
P–08–0753
P–09–0030
P–09–0043
P–09–0112
P–09–0122
P–09–0177
P–09–0214
P–09–0224
P–09–0284
P–09–0297
P–05–0351
P–05–0613
P–06–0340
P–07–0594
P–07–0595
P–08–0089
07/20/09
07/15/09
07/14/09
07/14/09
07/16/09
07/14/09
07/28/09
07/23/09
07/16/09
07/22/09
07/07/09
07/08/09
07/24/09
08/05/09
08/14/09
08/12/09
08/07/09
08/07/09
08/04/09
06/30/09
03/16/09
07/04/09
07/04/09
06/16/09
06/16/09
07/06/09
07/19/09
06/21/09
07/08/09
06/08/09
06/30/09
07/09/09
07/23/09
07/17/09
07/28/09
07/18/09
07/18/09
07/23/09
P–08–0115
P–09–0062
P–09–0132
P–09–0170
P–09–0186
P–09–0204
08/05/09
08/06/09
08/12/09
08/04/09
08/05/09
08/11/09
07/13/09
07/22/09
07/27/09
07/20/09
08/02/09
07/24/09
P–09–0236
P–98–0673
P–98–0679
08/11/09
08/04/09
08/04/09
07/31/09
04/28/08
04/28/08
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: September 24, 2009.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
erowe on DSK5CLS3C1PROD with NOTICES
[FR Doc. E9–23934 Filed 10–6–09; 8:45 am]
BILLING CODE 6560–50–S
Chemical
(G) Maleic anhydride, adipic acid, propylene glycol, polyglycol copolymer
(G) Fatty acid polymer with aliphatic diol and aromatic diacid
(G) Fluoroalkyl methacrylate copolymer
(G) Substituted naphthalenedisulfonic acid, substituted amino azo]-, sodium salt
(same generic name for both isomers)
(G) Hydrolyzed wheat silicone copolymer
(G) Silylated acrylic resin
(G) MDI polyester prepolymer
(G) Styrene/acrylate copolymer (carboxylated)
(G) Polyether polyphosphate ester
(G) Polyether polyalcohol derivative
(G) Urethane resin
(G) Glycidyl methacrylate alkyl (meth) acrylate copolymer
(G) Amine functional acrylic polymer
(G) Formaldehyde, polymer with amine and a phenol
(G) Copolymer of substituted propanesulfonic acid, maleate of ethylene oxidepropylene oxide
(S) 1,3-butanediol, manufacturer of, by-products from, distant residues
(G) Ethoxylated maleated triglyceride polymer
(G) Ester diol
(G) Organosilane derivative
(G) Polyester acrylate
(G) Benzenesulfonic acid, disodium salt
(G) Bis-A-epoxy resin - CTBN adduct
(G) Silicone modified polycarbonate
(G) Aliphatic urethane acrylate
(G) Styrene-methacrylate copolymer
(G) Isocyanate terminated urethane polymer
(G) Unsaturated polyester resin
(G) Copolymer of acrylic acid and methacrylic acid esters, and vinylcaprolactam
(G) SMA imide polyquat salt
(G) Bisphenol S mono ester
(S) Hexanedioic acid, potassium salt
(G) N,N,N-trialkylalkylamine chloride
(G) N,N,N-trialkylalkylamine acetate
(G) Fatty acid oils polymer with aromatic acid, acrylates, styrene, polyol and
conjugated anhydrides
(G) Olefin copolymer
(G) Alkyl aryl ether
(G) Alkyl substituted polyamide
(G) Isocyanate terminated polyether polyurethane
(S) Phenol, polymer with formaldehyde, bu ether
(G) Siloxanes and silicones, di-me, hydroxyalkyl me, alkoxylated, polymers with
diisocyanatoalkane, polyalkylene-glycol monoallyl ether-blocked
(S) Alkenes, C20–24 .alpha.-, polymers with maleic anhydride, C16–18- alkyl esters
(G) Alkyl benzene
(G) Alkyl benzenesulfonic acid
ENVIRONMENTAL PROTECTION
AGENCY
[FRL–8966–5; Docket ID No. EPA–HQ–ORD–
2009–0613]
Exposure Factors Handbook: 2009
Update
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice of public comment
period.
SUMMARY: EPA is announcing a 60-day
public comment period for the external
review draft document titled, ‘‘Exposure
Factors Handbook: 2009 Update’’ (EPA/
600/R–09/052A), which was prepared
by the National Center for
VerDate Nov<24>2008
15:25 Oct 06, 2009
Jkt 220001
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
Environmental Assessment (NCEA)
within EPA’s Office of Research and
Development (ORD). The Exposure
Factors Handbook provides a summary
of the available statistical data on
various factors used in assessing human
exposure. This Handbook is aimed at
exposure assessors inside the Agency as
well as those outside who use data on
standard factors to calculate human
exposure to toxic chemicals. These
factors include: drinking water
consumption; mouthing behavior; soil
ingestion rates; inhalation rates; dermal
factors, including skin area and soil
adherence factors; consumption of fruits
and vegetables, fish, meats, dairy
products, and homegrown foods; breast
milk intake; human activity factors;
E:\FR\FM\07OCN1.SGM
07OCN1
]]>Agencies
[Federal Register Volume 74, Number 193 (Wednesday, October 7, 2009)]
[Notices]
[Pages 51586-51592]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-23934]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2009-0741; FRL-8793-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from July 1, 2009 through August 14, 2009, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the specific PMN number or TME number,
[[Page 51587]]
must be received on or before November 6, 2009.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2009-0741, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2009-0741. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2009-0741. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
https://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at https://www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or
[[Page 51588]]
an application for a TME and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from July 1, 2009 through August 14, 2009, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit I. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 100 Premanufacture Notices Received From: 7/1/09 to 8/14/09
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-09-0416 06/11/09 09/08/09 CBI (G) a polymer in an (G) 3'H-cyclopropacal-
encapsulated bopolycle-
photovultaic module 3'butanoic acid. 3'-
phenyl-, methyl
ester; 3'H-
cyclopropacarbopolyc
yle-3' butanoic
acid, 3'- phenyl-,
methyl ester
P-09-0470 06/30/09 09/27/09 The Dow Chemical (G) Gas treatment (G) Sulfo-substituted
Company agent, contained use metal
heteropolycycle-
mixed sodium,
alkanolamine salt
P-09-0471 06/30/09 09/27/09 The Dow Chemical (G) Gas treatment (G) Sulfo-substituted
Company agent, contained use metal
heteropolycycle-
mixed sodium,
alkanolamine salt
P-09-0472 06/30/09 09/27/09 The Dow Chemical (G) Gas treatment (G) Sulfo-substituted
Company agent, contained use metal
heteropolycycle-
mixed sodium,
alkanolamine salt
P-09-0473 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0474 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0475 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0476 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0477 07/01/09 09/28/09 3M Company (G) Fluorinated (G) Fluoroalkyl
intermediate sulfonamide
P-09-0478 07/01/09 09/28/09 PPG Industries, Inc. (G) Component of a (G) Modified polyol
coating
P-09-0479 06/25/09 09/22/09 Lamberti USA, Inc. (S) Co-photoinitiator (S) Benzoic acid, 4-
for ultra violet- (dimethylamino)-,
curable pigmentated 1,1'-
inks; co- [(methylimino)di-2,
photoinitiator for 1-ethanedyl] ester
photoresists,
optical fibers and
printed plates; co-
photoinitiator for
ultra violet-curable
coatings; co-
photoinitiator for
ultra violet-curable
adhesives and other
coatings; non
dispersive use
P-09-0480 06/25/09 09/22/09 Lamberti USA, Inc. (S) Co-photoinitiator (S) 1-propanone, 1,1'
for ultra violet- (oxydi-4, 1-
curable pigmentated phenylene) bis [2-
inks; co- hydroxy-2-methyl-
photoinitiator for
photoresists,
optical fibers and
printed plates; co-
photoinitiator for
ultra violet-curable
coatings; co-
photoinitiator for
ultra violet-curable
adhesives and other
coatings; non
dispersive use
P-09-0481 07/01/09 09/28/09 3M Company (S) Protector for (G) Fluorinated
textile polymer
P-09-0482 07/01/09 09/28/09 CBI (S) Dispersed rosin (G) Rosin, maleic
size for sizing of anhydride, amine
paper and paperboard resin
P-09-0483 07/02/09 09/29/09 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified polyamine
P-09-0484 07/02/09 09/29/09 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified polyamine
P-09-0485 07/01/09 09/28/09 3M Company (G) Fluorinated (G) Fluorinated
intermediate sulfonamide alcohol
P-09-0486 07/02/09 09/29/09 CBI (G) Lubricant (G) Polyalkenyl, N,N'-
additive bistriazole
P-09-0487 07/02/09 09/29/09 CBI (G) Emulsifier (G) Organic phosphate
esters
P-09-0488 07/02/09 09/29/09 CBI (G) Component of (G) Substituted
consumer product acrylic acid maleic
anhydride copolymer
P-09-0489 07/02/09 09/29/09 Firmenich Inc. (S) Aroma for use in (S) Definition:
fragrance mixtures, Extractives and
which in turn are their physically
used in perfumes, modified
soaps, cleansers, derivatives.
etc. Periploca sepium.
P-09-0490 07/06/09 10/03/09 Firmenich Inc. (S) Aroma for use in (S) 2H-1,5-
fragrance mixtures, benzodioxepin-3 (4h)-
which in turn are one, 7-(1-
used in perfumes, methylethyl)-
soaps, cleansers,
etc.
[[Page 51589]]
P-09-0491 07/06/09 10/03/09 Forests Pacific (S) Fragrance (S) Definition:
Biochemicals ingredient Extractives and
Corporation their physically
modified
derivatives.
callitropsis
nootkatensis. Oil,
Callitropsis
nootkatensis
P-09-0492 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0493 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0494 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0495 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0496 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0497 07/09/09 10/06/09 Nanocyl Corporation, (S) Additivies to (S) Short tangled
a Georgia improve electrical, multi-wall carbon
Corporation thermal and/or nanotubes obtained
mechanical by catalytical
properties of chemical vapour
thermoplastic, deposition
thermoset and
coating materials
P-09-0498 07/10/09 10/07/09 CBI (S) Part of a two- (G) Aromatic
component gravure dicarboxylic acid,
ink and overprinting polymer with
lacquer system cycloaliphatic
diamine, 2-
(chloromethyl)oxiran
e, alkyldioic acid
and an aryl diphenol
P-09-0499 07/13/09 10/10/09 CBI (S) Raw material used (G) Aromatic
in fuel cell polyether polymer
applications.
P-09-0500 07/14/09 10/11/09 CBI (S) Fluorescent (G) 1,4-
whitening agent for benzenedisulfonic
uncoated paper acid, 2,2'-[1,2-
(formulation 1). ethenediylbis[(3-
Fluorescent sulfo-4,1-
whitening agent for phenylene)imino[6-
coated paper [bis(alkanol)amino]-
(formulation 2). 1,3,5-triazine-4,2-
diyl]imino]]bis-,
hexasodium salt
P-09-0501 07/14/09 10/11/09 CBI (G) Hole injection (G)
layer in a polymeric Hetromonocyclic[3,4-
photovoltaic module. b]thiophene,
homopolymer, 2-[1-
difluoro[(1,2,2-
trifluoroethenyl)oxy
]methyl]-1,2,2,2-
tetrafluoroethoxy]-
1,1,2,2-
tetrafluoroethyoxy]-
1,1,2,2-
tetrafluoroethanesul
fonic acid-
tetrafluoroethylene
polymer-doped
P-09-0502 07/14/09 10/11/09 CBI (G) Open, non- (G) Blocked aromatic
dispersive use isocyanate
P-09-0503 07/15/09 10/12/09 CBI (G) Polymerization (G) Fluoromaleate
feedstock
P-09-0504 07/15/09 10/12/09 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-09-0505 07/15/09 10/12/09 CBI (G) Coatings (G) Aliphatic
urethane acrylate
P-09-0506 07/14/09 10/11/09 Coim USA Inc. (S) Form insulation (S) Hexanedioic acid,
board polymer with
oxybis[propanol] and
1,2,3,-propanetriol
P-09-0507 07/15/09 10/12/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0508 07/15/09 10/12/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0509 07/15/09 10/12/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0510 07/16/09 10/13/09 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-09-0511 07/16/09 10/13/09 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-09-0512 07/16/09 10/13/09 Gelest, Inc. (S) Automotive part (S) Silane,
coating; research dichlorodimethyl-,
homopolymer
P-09-0513 07/17/09 10/14/09 CBI (S) Fixative for (G) Aminoalkyl
cellulose based polymer with
substrates in paper (chloromethyl)oxiran
manufacturing e
industry
P-09-0514 07/17/09 10/14/09 Coim USA Inc. (S) Packaging (S) Hexanedioic acid,
adhesives polymer with 2-
methyl-1,3-
propanediol
P-09-0515 07/16/09 10/13/09 Kuraray America, Inc. (S) Lubricants; (S) 2,5-furandione,
dispersants; polymer with 2-
adhesives methyl-1-propene,
amide, ammonium salt
P-09-0516 07/20/09 10/17/09 CBI (S) Part of two- (G) Fatty acids,
component gravure C16 18 and C18-
inks and unsaturated, polymer
overprinting with alkyldioic
lacquers acid,
cycloalkylamine,
aromatic diol, C18-
unsaturated fatty
acid dimers,
epichlorohydrin, an
aromatic acid and
triethylenetetramine
P-09-0517 07/21/09 10/18/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0518 07/22/09 10/19/09 CBI (G) Paper processing (G) Furandione
aid derivative
P-09-0519 07/24/09 10/21/09 CBI (G) Latent hardener (G) Aromatic bis-
curing agent for one oxalolidine
and two component
polyurethane
products
[[Page 51590]]
P-09-0520 07/24/09 10/21/09 CBI (G) Coating (G) Silane polymer
mixture
P-09-0521 07/27/09 10/24/09 CBI (G) Functional fluid, (G) Dialkyl
plasticiser, solvent imidazolium salt
P-09-0522 07/27/09 10/24/09 The Dow Chemical (G) Surfactant (G) Ethoxylated,
Company butoxylated alcohol
P-09-0523 07/27/09 10/24/09 The Dow Chemical (G) Surfactant (G) Ethoxylated,
Company butoxylated alcohol
P-09-0524 07/29/09 10/26/09 CBI (G) Chemical (G) Aromatic
intermediate polyester
P-09-0525 07/29/09 10/26/09 Huntsman Corporation (G) Coatings (G) Hydroxyamino aryl
amine
P-09-0526 07/28/09 10/25/09 Huntsman Corporation (G) Coatings (G) Hydroxyamino aryl
triamine
P-09-0527 07/28/09 10/25/09 CBI (S) Hardener for two- (G) Fatty acids,
part coating systems polymer with an
aromatic diol, C18-
unsaturated fatty
acids dimers,
epichlorohydrin and
triethylenetetramine
P-09-0528 07/30/09 10/27/09 CBI (G) Rubber additive (G) Vinylsilane
P-09-0529 07/30/09 10/27/09 CBI (G) Open, non- (G) Diacid, half
dispersive use. ester
P-09-0530 07/30/09 10/27/09 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-09-0531 07/30/09 10/27/09 CBI (G) Acrylic pressure (G) Acrylic solution
sensitive adhesive polymer
P-09-0532 07/30/09 10/27/09 CBI (G) Sealant (G) Bisurea compound
P-09-0533 07/27/09 10/24/09 Wacker Chemical (S) Adhesion promoter (S) Siloxanes and
Corporation silicones, me
hydrogen, me 3-(2-
oxiranylmethoxy)prop
yl, ethoxy- and
methoxy-terminated
P-09-0534 07/29/09 10/26/09 CBI (G) Open, non- (G) Carbamic acid,
dispersive use (methylenedicyclohex
(water-borne anediyl)bis-mixed
coatings systems) diesters with
polyethylene glycol
and polyethylene
glycol mono ethers
P-09-0535 08/03/09 10/31/09 CBI (S) Synthetic (G) Aromatic
intermediate hydrocarbon
P-09-0536 07/29/09 10/26/09 CBI (G) Open, non- (G) Carbamic acid,
dispersive use (methylenedicyclohex
(water-borne anediyl)bis-mixed
coatings systems) diesters with
unsaturated
alcohols,
polyethylene glycol
and polyethylene
glycol mono ethers
P-09-0537 07/29/09 10/26/09 CBI (G) Open, non- (G) Polyethylene
dispersive use glycol, alpha,
(water-borne alpha', alpha''-
coatings systems) propanetrilmonoester
s with
[[[carboxyaminitrime
thylcyclohexyl]methy
l]amino]carbonyl]-
octadecenyloxy)polye
thylene glycol
P-09-0538 07/29/09 10/26/09 CBI (G) Open- non- (G) Carbamic acid,
dispersive use (methylenedicyclohex
(water-borne anediyl)bis-mixed
coatings systems) diesters with
isoalcohols,
polyethylene glycol
and polyethylene
glycol mono ethers
P-09-0539 07/29/09 10/26/09 CBI (G) Open, non- (G) Carbamic acid,
dispersive use (trimethylhexanediyl
(water-borne )bis-mixed diesters
coatings systems) with unsaturated
alcohols,
isoalcohols and
polyethylene glycol
P-09-0540 08/03/09 10/31/09 CBI (S) Synthetic (G) Halogenated
intermediate aromatic hydrocarbon
P-09-0541 08/03/09 10/31/09 CBI (S) A semiconductor (G) Aromatic
host material for heterocycle
oled devices
P-09-0542 08/03/09 10/31/09 CBI (S) Uses per FFDCA: (S) 3-nonen-1-ol, 1-
Food / flavors; acetate, (3Z)-
fragrance material
in cosmetics; Uses
per TSCA: Fragrance
uses; scented
papers, detergents,
candles, etc.
P-09-0543 08/05/09 11/02/09 CBI (G) Coatings (G) Aromatic urethane
acrylate
P-09-0544 08/04/09 11/01/09 CBI (G) Coating raw (G)
material Polyalkyleneglycol,
reaction products
with hydroxyalkyl
acrylate,
dihydroxyalkyl
alkanoic acid,
sodium-aminoalkyl-
alaninate, sodium
salt
P-09-0545 08/04/09 11/01/09 Dic International (G) Additive for (G) Fluorinated
(USA) LLC lubricating oil acrylic ester
copolymer (telomer
type)
P-09-0546 08/04/09 11/01/09 CBI (G) Intermediate (G) Formaldehyde
reaction products
with aromatic amine
[[Page 51591]]
P-09-0547 08/04/09 11/01/09 CBI (G) Lubricant (G) Formaldehyde,
additive reaction products
with aromatic amine
and alkenyl
anhydride
P-09-0548 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant lights
P-09-0549 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant residues
P-09-0550 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant lights
P-09-0551 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant residues
P-09-0552 08/10/09 11/07/09 Henkel Corporation (S) A site limited (S) Benzene, 1,3-
starting material in bis(1-chloro-1-
novel polymer methylethyl)-
synthesis reactions
P-09-0553 08/10/09 11/07/09 CBI (G) Flame retardant (G) Metal phosphinate
polymer additive
P-09-0554 08/10/09 11/07/09 Dynamic Fuels LLC c/o (S) Renewable diesel (S) Fuels, diesel C8-
Syntroleum fuel to be blended C18 alkane branched
Corporation with petroleum- and linear
derived diesel definition: A
