Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 47208-47210 [E9-22148]

Download as PDF sroberts on DSKD5P82C1PROD with NOTICES 47208 Federal Register / Vol. 74, No. 177 / Tuesday, September 15, 2009 / Notices Division, at the address listed above. Comments may also be submitted by facsimile to (301)713–0376, or by email to NMFS.Pr1Comments@noaa.gov. Please include the File No. in the subject line of the email comment. Those individuals requesting a public hearing should submit a written request to the Chief, Permits, Conservation and Education Division at the address listed above. The request should set forth the specific reasons why a hearing on this application would be appropriate. FOR FURTHER INFORMATION CONTACT: Amy Sloan or Kate Swails, (301)713– 2289. SUPPLEMENTARY INFORMATION: The subject permit is requested under the authority of the Marine Mammal Protection Act of 1972, as amended (MMPA; 16 U.S.C. 1361 et seq.) and the regulations governing the taking and importing of marine mammals (50 CFR part 216). The proposed five-year permit comprises a continuation of psychological and physiological studies at Long Marine Laboratory with captive pinnipeds, including California sea lions (Zalophus californianus); harbor seals (Phoca vitulina); and northern elephant seals (Mirounga angustirostris), designed to evaluate their perceptual and cognitive capabilities. Measurements obtained using behavioral and physiological methods will be used to improve knowledge of pinniped sensory adaptations, examine cognitive mechanisms for acquiring and processing sensory information, and develop procedures for rapidly and humanely studying marine mammal hearing and the effects of anthropogenic noise. The captive animals are trained to voluntarily participate in behavioral stimulus detection and discrimination paradigms that may be conducted in air or under water. The applicant currently holds one California sea lion, one harbor seal, and one northern elephant seal, and requests permission to obtain additional animals for the research program over the duration of the permit, not to exceed a total of two of each species listed above. Additional animals would be obtained from captive and rehabilitation facilities, including permanently captive and non-releasable rehabilitated animals. If those sources are not available, releasable rehabilitated animals from West Coast rehabilitation facilities are requested. In compliance with the National Environmental Policy Act of 1969 (42 U.S.C. 4321 et seq.), an initial determination has been made that the activity proposed is categorically excluded from the requirement to VerDate Nov<24>2008 19:12 Sep 14, 2009 Jkt 217001 prepare an environmental assessment or environmental impact statement. Concurrent with the publication of this notice in the Federal Register, NMFS is forwarding copies of the application to the Marine Mammal Commission and its Committee of Scientific Advisors. Dated: September 9, 2009. P. Michael Payne, Chief, Permits, Conservation and Education Division, Office of Protected Resources, National Marine Fisheries Service. [FR Doc. E9–22180 Filed 9–14–09; 8:45 am] BILLING CODE 3510–22–S DEPARTMENT OF COMMERCE International Trade Administration The Manufacturing Council: Meeting of The Manufacturing Council AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION: Notice of an open meeting. SUMMARY: The Manufacturing Council will hold a meeting to deliberate a letter of recommendation regarding the U.S. manufacturing industry. The Board was re-chartered on April 10, 2008, to advise the Secretary of Commerce on matters relating to the U.S. manufacturing industry. DATES: October 1, 2009. Time: 2:30 p.m. (ET). ADDRESSES: Department of Commerce, 1401 Constitution Avenue, NW., Room 4830, Washington, DC, 20230. Because of building security, all non-government attendees must pre-register. This program will be physically accessible to people with disabilities. Seating is limited and will be on a first come, first served basis. Requests for sign language interpretation, other auxiliary aids, or pre-registration, should be submitted no later than September 25, 2009, to J. Marc Chittum, The Manufacturing Council, Room 4043, 1401 Constitution Avenue, NW., Washington, DC 20230, telephone 202–482–4501, Marc.Chittum@mail.doc.gov. FOR FURTHER INFORMATION CONTACT: J. Marc Chittum, The Manufacturing Council, Room 4043, 1401 Constitution Avenue, NW., Washington, DC 20230, telephone: 202–482–4501, e-mail: Marc.Chittum@mail.doc.gov. Dated: September 10, 2009. J. Marc Chittum, Executive Secretary, U.S. Travel and Tourism Advisory Board. [FR Doc. E9–22242 Filed 9–14–09; 8:45 am] BILLING CODE 3510–DR–P PO 00000 Frm 00024 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE National Institute of Standards and Technology Announcement of NIST Partnership Opportunities for Technology Transfer AGENCY: National Institute of Standards and Technology, Commerce. ACTION: Announcement of NIST Partnership Opportunities for Technology Transfer. SUMMARY: The National Institute of Standards and Technology (NIST) is interested in working with regional, state and local economic development organizations, technology incubation centers, technology-oriented publicprivate business development initiatives and other organizations and partnerships to facilitate the transfer of technologies developed within the NIST Labs to the private sector through potential licensing and/or collaboration. A sampling of commercially viable technologies developed at the NIST Labs may be viewed at: https:// www.nist.gov/patents. This is not an opportunity to apply for government funding and NIST will not make any funds available to any party pursuant to this announcement. FOR FURTHER INFORMATION CONTACT: National Institute of Standards and Technology, Office of Technology Partnerships, Attn: Clara Asmail, Building 222, Room A242, Gaithersburg, MD 20899. Information is also available via telephone: 301–975–2239, fax 301– 975–3482, or e-mail: clara.asmail@nist.gov. Please reference ‘‘Opportunities for Tech Transfer Partnerships’’ in any communications. Dated: September 10, 2009. Patrick Gallagher, Deputy Director. [FR Doc. E9–22205 Filed 9–14–09; 8:45 am] BILLING CODE 3510–13–P DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance AGENCY: Economic Development Administration, Department of Commerce. ACTION: Notice and opportunity for public comment. Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for E:\FR\FM\15SEN1.SGM 15SEN1 Federal Register / Vol. 74, No. 177 / Tuesday, September 15, 2009 / Notices certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the 47209 total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT [8/1/2009 through 8/31/2009] Date accepted for filing Firm Address Decore-Ative Specialties, Inc .................. 2772 South Peck Road Monrovia, CA 91016. 8/24/2009 C & R Plating Corp .................................. Miniature Precision Components, Inc ..... 302 Factory St. Columbia City, IN 46725 100 Wisconsin St. Walworth, WI 53184– 1901. 3 Latti Farm Road Millbury, MA 01527 ... 8/10/2009 8/14/2009 8/12/2009 8/11/2009 Genesee Packaging, Inc ......................... P.O. Box 645 Rocky Mount, NC 27802 .. 4514 Easton Road St. Joseph, MO 64503. 2010 N Dort Highway Flint, MI 48506 .... R.H. LeMieur Corp. ................................. 638 Patriots Road Templeton, MA 01468 8/10/2009 Cloverdale ................................................ 3015 34th Street, NW Mandan, ND 58554. 221 Shepard Street Ripon, WI 54971 ..... 8/6/2009 JEN Manufacturing, Inc ........................... Southern Mattress Co., Inc ..................... St. Joseph Packaging, Inc ....................... Alliance Laundry Systems, LLC .............. Prospect Machine Products, Inc ............. 8/6/2009 8/10/2009 8/12/2009 Products Wood cabinet doors & drawers for use in custom home remodeling. They also manufacture a laminated thermo-Foil door product. Plating of parts for industrial sectors. Plastic components for automobiles and other industries. Polyurethane foam disposable paint brushes and roller refills. Mattresses and box springs. Folding cartons and displays made of paper and paperbox material. Rigid boxes and cartons of paper or paperboard. Dining room furniture, bar stools, benches, desk chairs, rocking chairs, hutches, cabinets, hunt boards and buffets. Sausages and other prepared meat products. The company is a manufacturer of laundry machines for the commercial, industrial, and consumer industries. Drawn metal stampings. 8/10/2009 Freeway Corporation ............................... 139 Union City Road, PO Prospect, CT 06712. 5757 West Custer Street Manitowoc, WI 54220. 147 River Street Oneonta, NY 13820– 2239. 9301 Allen Drive Cleveland, OH 44125 .. American Cord and Webbing Co., Inc .... 88 Century Drive Woonsocket, RI 02895 8/14/2009 Hoist Liftruck Mfg., Inc ............................. 6499 W. 65th Street Bedford Park, IL 60638. 8 Mohawk Drive Leominster, MA 01453 8/13/2009 Motor housings, clamps, and various other steel components. Plastic injection molding products and pressure switches. Washers, bearings, turned metal products, stampings and assemblies. Stamped metal closures, plastic closures, cord and twine. Heavy-duty lift trucks. 8/11/2009 Fasteners. 18 Henry Graf Road, Unit 1 Newburyport, MA 01950. 3550 W. Tacoma St. Broken Arrow, OK 74012. 7315 West Wilson Avenue Harwood, IL 60706. 8/11/2009 Value added LCD goods. 8/10/2009 Tempered Glass. 8/10/2009 Jagemann Stamping Company ............... Mold-A-Matic Corporation ........................ Reed & Prince Manufacturing Corporation. Mass Integrated Systems Inc .................. Cameron Glass, Inc ................................. Quality Control Corp ................................ 8/13/2009 8/24/2009 8/13/2009 4500 W Eldorado Pkwy. McKinney, TX 75070. 964 Main Street W. Springfield, MA 01089. 387 Church Street New Bedford, MA 02745. 8/10/2009 Steering, braking, fuel system, pumps, actuators, air tools, directional control valves and surgical medical devices components. Manufacturing services include project management, management systems, material control, assembly and testing, and heat treating. Structural steel engineering. 8/11/2009 Metal finishing services. 8/11/2009 Beacon Group, Inc .................................. 85 Granby Street Bloomfield, CT 06002 8/11/2009 Gamblin Enterprises Inc, dba All American. Eastman Machine Company ................... 926 5th Ave. South Kent, WA 98032 ...... 8/11/2009 Custom-dyed knit, woven tape and cord for decorator window and blind treatments and a complete line of cordage for vertical blinds and pleated shades. Hubs, shafts, disks, seals, rings, housings, cases and gear boxes for the aerospace industry. Zinc, rack and barrel plating. 779 Washington Street Buffalo, NY 14203–1308. 71 North 16th Street Lebanon, PA 17042. 8/11/2009 Glenn Ihde & Company ........................... Standard Plating Inc ................................ sroberts on DSKD5P82C1PROD with NOTICES Julius Koch USA, Inc ............................... Henry Molded Products, Inc .................... VerDate Nov<24>2008 20:34 Sep 14, 2009 Jkt 217001 PO 00000 Frm 00025 Fmt 4703 Sfmt 4703 8/24/2009 E:\FR\FM\15SEN1.SGM Industrial cutting and spreading equipment for flexible materials. Molded pulp protective packaging materials. 15SEN1 47210 Federal Register / Vol. 74, No. 177 / Tuesday, September 15, 2009 / Notices Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Office of Performance Evaluation, Room 7009, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance. William P. Kittredge, Program Officer for TAA. [FR Doc. E9–22148 Filed 9–14–09; 8:45 am] BILLING CODE 3510–24–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–944] sroberts on DSKD5P82C1PROD with NOTICES Certain Oil Country Tubular Goods From the People’s Republic of China: Preliminary Affirmative Countervailing Duty Determination, Preliminary Negative Critical Circumstances Determination AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce preliminarily determines that countervailable subsidies are being provided to producers and exporters of certain oil country tubular goods from the People’s Republic of China. For information on the estimated subsidy rates, see the ‘‘Suspension of Liquidation’’ section of this notice. DATES: Effective Date: September 15, 2009. FOR FURTHER INFORMATION CONTACT: David Neubacher, Shane Subler, Magd Zalok, Maryanne Burke, and Henry Almond, AD/CVD Operations, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482–5823, (202) 482–0189, (202) 482–4162, (202) 482–5604, and (202) 482–0049, respectively. SUPPLEMENTARY INFORMATION: Case History The following events have occurred since the publication of the Department VerDate Nov<24>2008 19:12 Sep 14, 2009 Jkt 217001 of Commerce’s (‘‘Department’’) notice of initiation in the Federal Register. See Certain Oil Country Tubular Goods from the People’s Republic of China: Initiation of Countervailing Duty Investigation, 74 FR 20678 (May 5, 2009) (‘‘Initiation Notice’’), and the accompanying Initiation Checklist. On May 13, 2009, Maverick Tube Corporation, United States Steel Corporation, TMK IPSCO, V&M Star LP, Wheatland Tube Corporation, Evraz Rocky Mountain Steel, and United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union, AFL–CIO–CLC (‘‘United Steelworkers’’) (collectively, the ‘‘petitioners’’) submitted new subsidy allegations requesting the Department to expand its countervailing duty (‘‘CVD’’) investigation to include additional subsidy programs.1 On June 4, 2009, the Department declined to investigate these allegations as the petitioners did not allege the elements necessary for the imposition of CVDs or failed to support these allegations with reasonably available evidence. See Memorandum to Susan Kuhbach, Director, AD/CVD Operations, Office 1, ‘‘Analysis of Petitioners’ New Subsidy Allegations’’ (June 4, 2009). On June 3, 2009, the Department selected four Chinese producers/ exporters of certain oil country tubular goods (‘‘OCTG’’) as mandatory respondents, Jiangsu Changbao Steel Tube Co., Ltd. (‘‘Changbao’’), Tianjin Pipe (Group) Co. (‘‘TPCO’’), Wuxi Seamless Oil Pipe Co., Ltd. (‘‘Wuxi’’), and Zhejiang Jianli Enterprise Co., Ltd. (‘‘Jianli’’). See Memorandum to John M. Andersen, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, ‘‘Respondent Selection Memo’’ (June 3, 2009). This memorandum is on file in the Department’s Central Records Unit in Room 1117 of the main Department building (‘‘CRU’’). On the same date, we issued the CVD questionnaires to the Government of the People’s Republic of China (‘‘GOC’’), Changbao, TPCO, Wuxi, and Jianli. On June 10, 2009, the U.S. International Trade Commission (‘‘ITC’’) issued its affirmative preliminary determination that there is a reasonable indication that an industry in the United States is materially injured by reason of allegedly subsidized imports of certain oil country tubular goods from the People’s Republic of China (‘‘PRC’’). See Certain Oil Country Tubular Goods from China; Determinations, 1 See the petitioners’ Submission of New Subsidy Allegations (May 13, 2009). PO 00000 Frm 00026 Fmt 4703 Sfmt 4703 Investigation Nos. 701–TA–463 and 731–TA–1159, 74 FR 27559 (June 10, 2009). On June 15, 2009, the Department postponed the deadline for the preliminary determination in this investigation until September 8, 2009. See Certain Oil Country Tubular Goods from the People’s Republic of China: Postponement of Preliminary Determination in the Countervailing Duty Investigation, 74 FR 28220 (June 15, 2009). We received responses to our questionnaire from the GOC, Changbao, TPCO, Wuxi, and Jianli on July 20, 2009. See the GOC’s Original Questionnaire Response (July 20, 2009) (‘‘GQR’’), Changbao’s Original Questionnaire Response (July 20, 2009) (‘‘CQR’’), TPCO’s Original Questionnaire Response (July 20, 2009) (‘‘TQR’’), Wuxi’s Original Questionnaire Response (July 20, 2009) (‘‘WQR’’), and Jianli’s Original Questionnaire Response (July 20, 2009) (‘‘JQR’’). On August 26, 2009, TPCO provided a response on behalf of TPCO Charging Development Co., Ltd. (‘‘TCQR’’). On September 1, 2009, TPCO provided a response on behalf of Tianjin Pipe Investment Holding Co., Ltd. (‘‘TPCO Holding QR’’). We sent supplemental questionnaires to Changbao, TPCO, Wuxi, and Jianli on August 7, 2009 and to the GOC on July 27, 2009, August 11, 2009 and August 28, 2009. We received responses to these supplemental questionnaires as follows: Changbao’s First Supplemental Response on August 21, 2009; Jianli’s First Supplemental Response on August 21, 2009; TPCO’s First Supplemental Response, part 1 on August 21, 2009, and part 2 on August 26, 2009; Wuxi’s First Supplemental response (‘‘W1SR’’) on August 24, 2009; the GOC’s CrossOwned Affiliates Supplemental on August 3, 2009; GOC’s First Supplemental Response (‘‘G1SR’’) on August 26, 2009; and GOC’s Second Supplemental Response (‘‘G2SR’’) on September 1, 2009. On July 23, 2009, Maverick Tube Corporation requested that the Department extend the deadline for the submission of new subsidy allegations beyond the July 30, 2009 deadline established by the Department’s regulations. On July 24, 2009, we declined to extend the deadline. On July 30, 2009, the petitioners submitted additional new subsidy allegations to the Department.2 Jianli and the GOC 2 The petitioners, collectively, alleged that the GOC confers a subsidy on OCTG through its export restrictions on steel rounds. Maverick Tube Corporation made allegations regarding subsidies to respondent Jianli. United States Steel Corporation made allegations regarding subsidies to respondents E:\FR\FM\15SEN1.SGM 15SEN1

Agencies

[Federal Register Volume 74, Number 177 (Tuesday, September 15, 2009)]
[Notices]
[Pages 47208-47210]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-22148]

-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration

Notice of Petitions by Firms for Determination of Eligibility To
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and opportunity for public comment.

-----------------------------------------------------------------------

Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et
seq.), the Economic Development Administration (EDA) has received
petitions for

[[Page 47209]]

certification of eligibility to apply for Trade Adjustment Assistance
from the firms listed below. EDA has initiated separate investigations
to determine whether increased imports into the United States of
articles like or directly competitive with those produced by each firm
contributed importantly to the total or partial separation of the
firm's workers, or threat thereof, and to a decrease in sales or
production of each petitioning firm.

List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment
[8/1/2009 through 8/31/2009]
----------------------------------------------------------------------------------------------------------------
Date accepted
Firm Address for filing Products
----------------------------------------------------------------------------------------------------------------
Decore-Ative Specialties, Inc........... 2772 South Peck Road 8/24/2009 Wood cabinet doors &
Monrovia, CA 91016. drawers for use in custom
home remodeling. They
also manufacture a
laminated thermo-Foil
door product.
C & R Plating Corp...................... 302 Factory St. Columbia 8/10/2009 Plating of parts for
City, IN 46725. industrial sectors.
Miniature Precision Components, Inc..... 100 Wisconsin St. 8/14/2009 Plastic components for
Walworth, WI 53184-1901. automobiles and other
industries.
JEN Manufacturing, Inc.................. 3 Latti Farm Road 8/6/2009 Polyurethane foam
Millbury, MA 01527. disposable paint brushes
and roller refills.
Southern Mattress Co., Inc.............. P.O. Box 645 Rocky Mount, 8/12/2009 Mattresses and box
NC 27802. springs.
St. Joseph Packaging, Inc............... 4514 Easton Road St. 8/11/2009 Folding cartons and
Joseph, MO 64503. displays made of paper
and paperbox material.
Genesee Packaging, Inc.................. 2010 N Dort Highway Flint, 8/10/2009 Rigid boxes and cartons of
MI 48506. paper or paperboard.
R.H. LeMieur Corp....................... 638 Patriots Road 8/10/2009 Dining room furniture, bar
Templeton, MA 01468. stools, benches, desk
chairs, rocking chairs,
hutches, cabinets, hunt
boards and buffets.
Cloverdale.............................. 3015 34th Street, NW 8/6/2009 Sausages and other
Mandan, ND 58554. prepared meat products.
Alliance Laundry Systems, LLC........... 221 Shepard Street Ripon, 8/12/2009 The company is a
WI 54971. manufacturer of laundry
machines for the
commercial, industrial,
and consumer industries.
Prospect Machine Products, Inc.......... 139 Union City Road, PO 8/10/2009 Drawn metal stampings.
Prospect, CT 06712.
Jagemann Stamping Company............... 5757 West Custer Street 8/13/2009 Motor housings, clamps,
Manitowoc, WI 54220. and various other steel
components.
Mold-A-Matic Corporation................ 147 River Street Oneonta, 8/24/2009 Plastic injection molding
NY 13820-2239. products and pressure
switches.
Freeway Corporation..................... 9301 Allen Drive 8/13/2009 Washers, bearings, turned
Cleveland, OH 44125. metal products, stampings
and assemblies.
American Cord and Webbing Co., Inc...... 88 Century Drive 8/14/2009 Stamped metal closures,
Woonsocket, RI 02895. plastic closures, cord
and twine.
Hoist Liftruck Mfg., Inc................ 6499 W. 65th Street 8/13/2009 Heavy-duty lift trucks.
Bedford Park, IL 60638.
Reed & Prince Manufacturing Corporation. 8 Mohawk Drive Leominster, 8/11/2009 Fasteners.
MA 01453.
Mass Integrated Systems Inc............. 18 Henry Graf Road, Unit 1 8/11/2009 Value added LCD goods.
Newburyport, MA 01950.
Cameron Glass, Inc...................... 3550 W. Tacoma St. Broken 8/10/2009 Tempered Glass.
Arrow, OK 74012.
Quality Control Corp.................... 7315 West Wilson Avenue 8/10/2009 Steering, braking, fuel
Harwood, IL 60706. system, pumps, actuators,
air tools, directional
control valves and
surgical medical devices
components. Manufacturing
services include project
management, management
systems, material
control, assembly and
testing, and heat
treating.
Glenn Ihde & Company.................... 4500 W Eldorado Pkwy. 8/10/2009 Structural steel
McKinney, TX 75070. engineering.
Standard Plating Inc.................... 964 Main Street W. 8/11/2009 Metal finishing services.
Springfield, MA 01089.
Julius Koch USA, Inc.................... 387 Church Street New 8/11/2009 Custom-dyed knit, woven
Bedford, MA 02745. tape and cord for
decorator window and
blind treatments and a
complete line of cordage
for vertical blinds and
pleated shades.
Beacon Group, Inc....................... 85 Granby Street 8/11/2009 Hubs, shafts, disks,
Bloomfield, CT 06002. seals, rings, housings,
cases and gear boxes for
the aerospace industry.
Gamblin Enterprises Inc, dba All 926 5th Ave. South Kent, 8/11/2009 Zinc, rack and barrel
American. WA 98032. plating.
Eastman Machine Company................. 779 Washington Street 8/11/2009 Industrial cutting and
Buffalo, NY 14203-1308. spreading equipment for
flexible materials.
Henry Molded Products, Inc.............. 71 North 16th Street 8/24/2009 Molded pulp protective
Lebanon, PA 17042. packaging materials.
----------------------------------------------------------------------------------------------------------------

[[Page 47210]]

Any party having a substantial interest in these proceedings may
request a public hearing on the matter. A written request for a hearing
must be submitted to the Office of Performance Evaluation, Room 7009,
Economic Development Administration, U.S. Department of Commerce,
Washington, DC 20230, no later than ten (10) calendar days following
publication of this notice. Please follow the procedures set forth in
Section 315.9 of EDA's final rule (71 FR 56704) for procedures for
requesting a public hearing. The Catalog of Federal Domestic Assistance
official program number and title of the program under which these
petitions are submitted is 11.313, Trade Adjustment Assistance.

William P. Kittredge,
Program Officer for TAA.
[FR Doc. E9-22148 Filed 9-14-09; 8:45 am]
BILLING CODE 3510-24-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.