Approval for Expanded Manufacturing Authority; Foreign-Trade Subzone 15E; Kawasaki Motors Manufacturing Corp., U.S.A., Inc. (Internal Combustion Engines); Maryville, MO, 46087-46088 [E9-21622]
Download as PDF
<![CDATA[
Federal Register / Vol. 74, No. 172 / Tuesday, September 8, 2009 / Notices
separate rate, the cash deposit rate will
be the PRC-wide rate of 157.68 percent
(see Ironing Tables Order); and (4) for
all non-PRC exporters of subject
merchandise which have not received
their own rate, the cash deposit rate will
Margin
be the rate applicable to the PRC
(percent)
exporters that supplied that non-PRC
exporter. These deposit requirements,
when imposed, shall remain in effect
until publication of the final results of
157.68
the next administrative review.
Preliminary Results of Review
We preliminarily determine that the
following antidumping duty margin
exists:
Exporter
The PRC-Wide Entity (including
Foshan Shunde Yongjian
Housewares & Hardware Co.,
Ltd.) .........................................
jlentini on DSKJ8SOYB1PROD with NOTICES
Assessment Rate
Pursuant to 19 CFR 351.212(b), the
Department will determine, and CBP
shall assess, antidumping duties on all
appropriate entries. The Department
will issue appropriate assessment
instructions directly to CBP 15 days
after the date of publication of the final
results of this review. For assessment
purposes, where possible, we calculate
importer-specific ad valorem
assessment rates for ironing tables from
the PRC based on the ratio of the total
amount of the dumping duties
calculated for the examined sales to the
total entered value of those same sales.
Where assessments are based upon total
facts available, including total AFA, we
instruct CBP to assess duties at the ad
valorem margin rate published above.
We will instruct CBP to assess
antidumping duties on all appropriate
entries covered by this review if any
assessment rate calculated in the final
results of this review is above de
minimis. The final results of this review
shall be the basis for the assessment of
antidumping duties on entries of
merchandise covered by the final results
of this review and for future deposits of
estimated duties, where applicable.
Cash Deposit Requirements
The following cash deposit
requirements will be effective upon
publication of the final results of this
administrative review for all shipments
of the subject merchandise entered, or
withdrawn from warehouse, for
consumption on or after the publication
date, as provided for by section
751(a)(2)(C) of the Act: (1) For the
exporters listed above, the cash deposit
rate will be established in the final
results of this review (except, if the rate
is zero or de minimis, i.e., less than 0.5
percent, no cash deposit will be
required for that company); (2) for
previously investigated or reviewed PRC
and non-PRC exporters not listed above
that have separate rates, the cash
deposit rate will continue to be the
exporter-specific rate published for the
most recent period; (3) for all PRC
exporters of subject merchandise which
have not been found to be entitled to a
VerDate Nov<24>2008
17:32 Sep 04, 2009
Jkt 217001
Public Comment
Interested parties may submit case
briefs within 30 days of the date of
publication of this notice in accordance
with 19 CFR 351.309(c)(1)(ii). As part of
the case brief, parties are encouraged to
provide a summary of the arguments not
to exceed five pages and a table of
statutes, regulations, and cases cited in
accordance with 19 CFR 351.309(c)(2).
Rebuttal briefs, which must be limited
to issues raised in the case briefs, must
be filed within five days after the case
brief is filed in accordance with 19 CFR
351.309(d).
Any interested party may request a
hearing within 30 days of publication of
this notice in accordance with 19 CFR
351.310(c). Any hearing will be held 37
days after the publication of this notice,
or the first workday thereafter unless the
Department alters the date pursuant to
19 CFR 351.310(d). Individuals who
wish to request a hearing must submit
a written request within 30 days of the
publication of this notice in the Federal
Register to the Assistant Secretary for
Import Administration, U.S. Department
of Commerce, Room 1870, 14th Street
and Constitution Avenue, NW.,
Washington, DC 20230. Requests for a
public hearing should contain: (1) The
party’s name, address, and telephone
number; (2) the number of participants;
and (3) to the extent practicable, an
identification of the arguments to be
raised at the hearing. If a hearing is
held, an interested party may make an
affirmative presentation only on
arguments included in that party’s case
brief and may make a rebuttal
presentation only on arguments
included in that party’s rebuttal brief in
accordance with 19 CFR 351.310(c).
Parties should confirm by telephone the
time, date, and place of the hearing
within 48 hours before the scheduled
time.
The Department will issue the final
results of this review, which will
include the results of its analysis of
issues raised in the briefs, not later than
120 days after the date of publication of
this notice in accordance with section
751(a)(3)(A) of the Act and 19 CFR
351.213(h)(1).
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
46087
Notification to Importers
This notice also serves as a
preliminary reminder to importers of
their responsibility under 19 CFR
351.402(f) to file a certificate regarding
the reimbursement of antidumping
duties prior to liquidation of the
relevant entries during these review
periods. Failure to comply with this
requirement could result in the
Secretary’s presumption that
reimbursement of antidumping duties
occurred and the subsequent assessment
of double antidumping duties.
These preliminary results of
administrative review are issued and
this notice is published in accordance
with sections 751(a)(1) and 777(i)(1) of
the Act.
Dated: August 31, 2009.
Ronald K. Lorentzen,
Acting Assistant Secretary for Import
Administration.
[FR Doc. E9–21426 Filed 9–4–09; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1643]
Approval for Expanded Manufacturing
Authority; Foreign-Trade Subzone 15E;
Kawasaki Motors Manufacturing Corp.,
U.S.A., Inc. (Internal Combustion
Engines); Maryville, MO
Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as
amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the
following Order:
Whereas, Greater Kansas City ForeignTrade Zone, Inc., grantee of ForeignTrade Zone 15, has requested an
expansion of the scope of manufacturing
authority on behalf of Kawasaki Motors
Manufacturing Corp., U.S.A., Inc.
(KMMC), operator of Subzone 15E at the
KMMC engine manufacturing plant in
Maryville, Missouri (FTZ Docket 59–
2008, filed 10–14–08);
Whereas, notice inviting public
comment has been given in the Federal
Register (73 FR 62950, 10–22–08) and
the application has been processed
pursuant to the FTZ Act and the Board’s
regulations; and,
Whereas, the Board adopts the
findings and recommendations of the
examiner’s report, and finds that the
requirements of the FTZ Act and
Board’s regulations are satisfied, and
that the proposal is in the public
interest;
Now, therefore, the Board hereby
orders:
E:\FR\FM\08SEN1.SGM
08SEN1
46088
Federal Register / Vol. 74, No. 172 / Tuesday, September 8, 2009 / Notices
The application to expand the scope
of manufacturing authority under zone
procedures within Subzone 15E, as
described in the application and
Federal Register notice, is approved,
subject to the FTZ Act and the Board’s
regulations, including Section 400.28.
DEPARTMENT OF COMMERCE
Signed at Washington, DC, this 27th day of
August 2009.
Ronald K. Lorentzen,
Acting Assistant Secretary of Commerce for
Import Administration, Alternate Chairman,
Foreign-Trade Zones Board.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E9–21622 Filed 9–4–09; 8:45 am]
AGENCY: Bureau of Industry and
Security, Commerce.
ACTION: Request for comments on
foreign policy-based export controls.
BILLING CODE P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1642]
Designation of New Grantee; ForeignTrade Zone 219, Yuma, AZ; Resolution
and Order
Pursuant to its authority under the
Foreign-Trade Zones Act of June 18,
1934, as amended (19 U.S.C. 81a–81u),
and the Foreign-Trade Zones Board
Regulations (15 CFR Part 400), the
Foreign-Trade Zones Board (the Board)
adopts the following Order:
jlentini on DSKJ8SOYB1PROD with NOTICES
The Foreign-Trade Zones (FTZ) Board (the
Board) has considered the application (filed
06/23/2009) submitted by the Yuma County
Airport Authority, grantee of FTZ 219, Yuma,
Arizona, requesting reissuance of the grant of
authority for said zone to the Greater Yuma
Economic Development Corporation, a nonprofit organization, which has accepted such
reissuance subject to approval by the FTZ
Board. Upon review, the Board finds that the
requirements of the FTZ Act and the Board’s
regulations are satisfied, and that the
proposal is in the public interest.
Therefore, the Board approves the
application and recognizes the Greater Yuma
Economic Development Corporation as the
new grantee of Foreign Trade Zone 219,
subject to the FTZ Act and the Board’s
regulations, including Section 400.28.
Signed at Washington, DC, this 27th day of
August 2009.
Ronald K. Lorentzen,
Acting Assistant Secretary of Commerce for
Import Administration, Alternate Chairman,
Foreign-Trade Zones Board.
Attest:
Andrew McGilvray,
Executive Secretary.
[FR Doc. E9–21621 Filed 9–4–09; 8:45 am]
BILLING CODE P
VerDate Nov<24>2008
17:32 Sep 04, 2009
Jkt 217001
Bureau of Industry and Security
[Docket No. 0908181241–91250–01]
Effects of Foreign Policy-Based Export
Controls
SUMMARY: The Bureau of Industry and
Security (BIS) is reviewing the foreign
policy-based export controls in the
Export Administration Regulations to
determine whether they should be
modified, rescinded or extended. To
help make these determinations, BIS is
seeking comments on how existing
foreign policy-based export controls
have affected exporters and the general
public.
DATES: Comments must be received by
October 8, 2009.
ADDRESSES: Comments may be sent by
e-mail to publiccomments@bis.doc.gov
or on paper to Regulatory Policy
Division, Bureau of Industry and
Security, Department of Commerce,
14th Street & Pennsylvania Avenue,
NW., Room 2705, Washington, DC
20230. Include the phrase ‘‘FPBEC
Comment’’ in the subject line of the email message or on the envelope if
submitting comments on paper.
FOR FURTHER INFORMATION CONTACT: Joan
Roberts, Foreign Policy Division, Office
of Nonproliferation and Treaty
Compliance, Bureau of Industry and
Security, Telephone: (202) 482–4252.
Copies of the current Annual Foreign
Policy Report to the Congress are
available at https://www.bis.doc.gov/
news/2009/2009-fpr.pdf and copies may
also be requested by calling the Office
of Nonproliferation and Treaty
Compliance at the number listed above.
SUPPLEMENTARY INFORMATION: Foreign
policy-based controls in the Export
Administration Regulations (EAR) are
implemented pursuant to Section 6 of
the Export Administration Act of 1979,
as amended. The current foreign policybased export controls maintained by the
Bureau of Industry and Security (BIS)
are set forth in the EAR, including in
parts 742 (CCL Based Controls), 744
(End-User and End-Use Based Controls)
and 746 (Embargoes and Other Special
Controls). These controls apply to a
range of countries, items, activities and
persons, including: entities acting
contrary to the national security or
foreign policy interests of the United
States (§ 744.11); certain general
purpose microprocessors for ‘military
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
end-uses’ and ‘military end-users’
(§ 744.17); significant items (SI): hot
section technology for the development,
production, or overhaul of commercial
aircraft engines, components, and
systems (§ 742.14); encryption items
(§ 742.15); crime control and detection
commodities (§ 742.7); specially
designed implements of torture
(§ 742.11); certain firearms and related
items based on the Organization of
American States Model Regulations for
the Control of the International
Movement of Firearms, their Parts and
Components and Munitions included
within the Inter-American Convention
Against the Illicit Manufacturing of and
Trafficking in Firearms, Ammunition,
Explosives, and Other Related Materials
(§ 742.17); regional stability items
(§ 742.6); equipment and related
technical data used in the design,
development, production, or use of
certain rocket systems and unmanned
air vehicles (§§ 742.5 and 744.3);
chemical precursors and biological
agents, associated equipment, technical
data, and software related to the
production of chemical and biological
agents (§§ 742.2 and 744.4) and various
chemicals included in those controlled
pursuant to the Chemical Weapons
Convention (§ 742.18); nuclear
propulsion (§ 744.5); aircraft and vessels
(§ 744.7); restrictions to exports on
certain persons designated as weapons
of mass destruction proliferators
(§ 744.8); communication intercepting
devices (software and technology)
(§ 742.13); embargoed countries (part
746); countries designated as supporters
of acts of international terrorism
(§§ 742.8, 742.9, 742.10, 742.19, 746.2,
746.4, 746.7, and 746.9); certain entities
in Russia (§ 744.10); individual
terrorists and terrorist organizations
(§§ 744.12, 744.13 and 744.14); certain
persons designated by Executive Order
13315 (‘‘Blocking Property of the
Former Iraqi Regime, Its Senior Officials
and Their Family Members’’) (§ 744.18);
and certain sanctioned entities
(§ 744.20). Attention is also given in this
context to the controls on nuclearrelated commodities and technology
(§§ 742.3 and 744.2), which are, in part,
implemented under section 309(c) of the
Nuclear Non Proliferation Act.
Under the provisions of section 6 of
the Export Administration Act of 1979,
as amended (50 U.S.C. app. §§ 2401–
2420 (2000)) (EAA), export controls
maintained for foreign policy purposes
require annual extension. Section 6 of
the EAA requires a report to Congress
when foreign policy-based export
controls are extended. The EAA expired
on August 20, 2001. Executive Order
E:\FR\FM\08SEN1.SGM
08SEN1
]]>Agencies
[Federal Register Volume 74, Number 172 (Tuesday, September 8, 2009)]
[Notices]
[Pages 46087-46088]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-21622]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Order No. 1643]
Approval for Expanded Manufacturing Authority; Foreign-Trade
Subzone 15E; Kawasaki Motors Manufacturing Corp., U.S.A., Inc.
(Internal Combustion Engines); Maryville, MO
Pursuant to its authority under the Foreign-Trade Zones Act of
June 18, 1934, as amended (19 U.S.C. 81a-81u), the Foreign-Trade
Zones Board (the Board) adopts the following Order:
Whereas, Greater Kansas City Foreign-Trade Zone, Inc., grantee of
Foreign-Trade Zone 15, has requested an expansion of the scope of
manufacturing authority on behalf of Kawasaki Motors Manufacturing
Corp., U.S.A., Inc. (KMMC), operator of Subzone 15E at the KMMC engine
manufacturing plant in Maryville, Missouri (FTZ Docket 59-2008, filed
10-14-08);
Whereas, notice inviting public comment has been given in the
Federal Register (73 FR 62950, 10-22-08) and the application has been
processed pursuant to the FTZ Act and the Board's regulations; and,
Whereas, the Board adopts the findings and recommendations of the
examiner's report, and finds that the requirements of the FTZ Act and
Board's regulations are satisfied, and that the proposal is in the
public interest;
Now, therefore, the Board hereby orders:
[[Page 46088]]
The application to expand the scope of manufacturing authority
under zone procedures within Subzone 15E, as described in the
application and Federal Register notice, is approved, subject to the
FTZ Act and the Board's regulations, including Section 400.28.
Signed at Washington, DC, this 27th day of August 2009.
Ronald K. Lorentzen,
Acting Assistant Secretary of Commerce for Import Administration,
Alternate Chairman, Foreign-Trade Zones Board.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E9-21622 Filed 9-4-09; 8:45 am]
BILLING CODE P
