Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 41398-41399 [E9-19712]

Download as PDF 41398 Federal Register / Vol. 74, No. 157 / Monday, August 17, 2009 / Notices Dated: August 12, 2009. Yvette Springer, Committee Liaison Officer. [FR Doc. E9–19665 Filed 8–14–09; 8:45 am] FOR FURTHER INFORMATION CONTACT: Paul J. Howard, Executive Director, New England Fishery Management Council; telephone: (978) 465–0492. BILLING CODE 3510–JT–P SUPPLEMENTARY INFORMATION: DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN: 0648–XR00 New England Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice of a public meeting. SUMMARY: The New England Fishery Management Council (Council) is scheduling a public meeting of its Scallop Survey Advisory Panel, in September, 2009, to consider actions affecting New England fisheries in the exclusive economic zone (EEZ). Recommendations from this group will be brought to the full Council for formal consideration and action, if appropriate. DATES: This meeting will be held on Thursday, September 3, 2009 at 9 a.m. ADDRESSES: This meeting will be held at the Hotel Providence, 139 Mathewson Street, Providence, RI 02903; telephone: (401) 861–8000; fax: (401) 861–8002. Council address: New England Fishery Management Council, 50 Water Street, Mill 2, Newburyport, MA 01950. The Advisory Panel will review and discuss the results from the 2009 regular and experimental scallop surveys. Recommendations for calibration peer review, 2010 survey research, and integrated survey methodology may be developed. The panel may recommend changes to scallop survey research priorities. Other related scallop survey priorities. Other related scallop survey and research set aside issues may be discussed. Although non-emergency issues not contained in this agenda may come before this group for discussion, in accordance with the Magnuson-Stevens Fishery Conservation and Management Act (Magnuson-Stevens Act), those issues may not be the subject of formal action during this meeting. Actions will be restricted to those issues specifically identified in this notice and any issues arising after publication of this notice that require emergency action under Section 305(c) of the Magnuson-Stevens Act, provided the public has been notified of the Council’s intent to take final action to address the emergency. Special Accommodations This meeting is physically accessible to people with disabilities. Requests for sign language interpretation or other auxiliary aids should be directed to Paul J. Howard, Executive Director, at (978) 465–0492, at least 5 days prior to the meeting date. Authority: 16 U.S.C. 1801 et seq. Dated: August 12, 2009. William D. Chappell, Acting Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. E9–19661 Filed 8–14–09; 8:45 am] BILLING CODE 3510–22–S DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance AGENCY: Economic Development Administration, Department of Commerce. ACTION: Notice and opportunity for public comment. Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT [July 7, 2009 through August 6, 2009] Date accepted for filing Firm Address Mastercraft Specialties, Inc. ..... 800 Maple Street, Red Lion, PA 17356. 7/24/2009 SideLifts, Inc. ............................ 1208 B Badger Street, Yorkville, IL 60560. N52 W5338 Portland Road, Cedarburg, WI 53095. 335 H. Clark Dr., El Paso, TX 79905. 7 Main Street, Ellington, CT 06029. 2391 S. State Road 263, West Lebanon, IN 47991. 300 SE., 14th Street, Pella, IA 50219. 1250 S. Old State Road 67, Mooresville, IN 46158. 1302 Industrial Pike, Gastonia, NC 28052–0010. 3600 Candlers Mtn. Rd., Lynchburg, VA 24506. 7/9/2009 Federal Tool & Engineering, LLC. J.B. Hill Boot Company ............ mstockstill on DSKH9S0YB1PROD with NOTICES Dymotek Corporation ................ Tru-Flex Metal Hose Corporation. Precision Inc. D.B.A. Precision Pulley & Idler. Overton & Sons Tool & Die, Company, Inc.. Conitex Sonoco, Inc. ................ C.R. Hudgins Plating, Inc. ........ VerDate Nov<24>2008 17:55 Aug 14, 2009 Jkt 217001 PO 00000 Frm 00033 7/23/2009 7/23/2009 7/23/2009 Products Furniture for college and military dormitories; healthcare/nursing home furniture for patient rooms; store fixtures and point of purchase displays. Electric four-directional lift truck. Welded, machined, stamped, fabricated and assembled metal components. Leather footwear, cowboy boots. 7/20/2009 Dynamic molding technologies, core capabilities, secondary services and support systems. Flexible metal hoses, piping, connectors and associated products. Conveyor pulleys and idlers. 7/20/2009 Metal tools. 7/21/2009 Paper cones and tubes for spun yarn, and corrugated pallets. 7/29/2009 Electroplating, coating and anodizing metals services. 7/30/2009 Fmt 4703 Sfmt 4703 E:\FR\FM\17AUN1.SGM 17AUN1 Federal Register / Vol. 74, No. 157 / Monday, August 17, 2009 / Notices 41399 LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT— Continued [July 7, 2009 through August 6, 2009] Date accepted for filing Firm Address Flow Sciences, Inc. ................... 2025 Mercantile Drive, Leland, NC 28451. 1127 Union Avenue, Laconia, NH 03246. 7/23/2009 1314 Perkins Ave., Elkhart, IN 45616. 205 South 600 W, Logan, UT 84321. 78 Progress Ave., Tyngsboro, MA 01879. 16000 E. Michigan Ave., Albion, MI 49224. 4330 Clary Blvd., Kansas City, MO 64130. 6009 Manchester Road, St Louis, MO 63110–1908. 2925 N. 7 Highway, Blue Springs, MO 64014. 38 River Road, Uxbridge, MA 01569. 3 Latti Farm Road, Millbury, MA 01527. 10095 Queens Way, Chagrin Falls, OH 44023. 315 Sawmill Road, P.O. Box, Greenfield, NH 03047. 6202 S. State Rd., Goodrich, MI 48438. P.O. Box 978, Muskogee, OK 74402. 47–10 32nd Place, Long Island, NY 11101. 2818 National Place, Colorado, CO 80906. 915 Borom Road, York, PA 17404. 7/9/2009 Safety enclosures; materials include acrylic, polypropylene, lab-grade phenolic, & stainless steel. Custom pool tables. They also service and sell all types of billiard accessories, air hockey, shuffleboard and ping pong tables and offer game room design services. Heating elements and devices. 7/9/2009 Biological laboratory reagent products. Barons Billiards, Inc. ................. Ultra Heat Inc. ........................... ScyTek Laboratories, Inc. ......... C&C Machine, Inc. .................... Caster Concepts, Inc. ............... Arrowhead Containers, Inc ....... Great Eagle Enterprises Corp .. Gemaco, Inc ............................. Lampin Corporation .................. JEN Manufacturing, Inc. ........... Mar-Bal, Incorporated ............... New England Forest Products .. Burton Industries Inc. ................ Acme Engineering and Manufacturing. KDK Trimmings & Novelty, Inc. IP Automation, Inc. ................... Surtech Industries, Inc. ............. 7/21/2009 7/23/2009 7/23/2009 7/23/2009 7/23/2009 7/23/2009 7/23/2009 8/6/2009 Hard and softwood. 7/7/2009 7/7/2009 7/21/2009 7/9/2009 7/10/2009 Crownlite Mfg. Corp. ................. 1546 Ocean Ave., Bohemia, NY 11716. 7800 Graphics Drive, Tinley Park, IL 60477. 3057 Delta Drive, Colorado, CO 80910. 3015 34th Street, NW., Mandan, ND 58554. 935 Loma Verde, El Paso, TX 79936. 7/9/2009 mstockstill on DSKH9S0YB1PROD with NOTICES Claudes Sauces, Inc. ................ Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Office of Performance Evaluation, Room 7009, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of VerDate Nov<24>2008 17:55 Aug 14, 2009 Jkt 217001 Full CNC capabilities in turned parts from .020″ to 6″diameter and lengths up to 36″. Polyurethane foam disposable paint brushes and roller refills. 7/30/2009 7/9/2009 Cloverdale ................................. Die & metal stamping products: brushings, sleeves, covers, handles, enclosure boxes, wrenches, etc. Playing cards and table game layouts. Thermoset custom molded parts and molding compounds 48 Main Street, Stockbridge, MA 01262. Finishes LTD ............................. Custom precision machined prototype and production components. Casters for industrial machines and large equipment; other machined parts. Corrugated boxes and displays. 7/28/2009 RTR Technologies, Inc. ............ Bryco Machine, Inc. .................. Products 7/7/2009 7/14/2009 8/6/2009 7/10/2009 Robotic process equipment, automation, fixtures and special machinery. Industrial grade propeller exhaust fans, blowers and centrifuges. Trimming for apparel. Stitched trimming for women’s clothing. Machined metal products. Finishing services to include: powder coating, metal blasting, polishing and buffing, nickel braze coatings, specialty liquid and Teflon coatings and other services. Track heaters, contact rail heaters and OSC heaters and related controls, auxiliary and freeze protection heaters and related controls for rolling stock, passenger comfort heaters for rolling stock and their related controls, HVAC, door operation and train. Metal lighting fixtures. Complex state-of-the-art machined metal parts in both short and long production runs in addition to prototyping. Anodizing and plating coatings for metal forming operations. Sausages and other prepared meat products. Meat sauces and marinades. this notice. Please follow the procedures set forth in Section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance. PO 00000 Frm 00034 Fmt 4703 Sfmt 4703 Dated: August 11, 2009. William P. Kittredge, Program Officer for TAA. [FR Doc. E9–19712 Filed 8–14–09; 8:45 am] BILLING CODE 3510–24–P E:\FR\FM\17AUN1.SGM 17AUN1

Agencies

[Federal Register Volume 74, Number 157 (Monday, August 17, 2009)]
[Notices]
[Pages 41398-41399]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-19712]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY: Economic Development Administration, Department of Commerce.

ACTION: Notice and opportunity for public comment.

-----------------------------------------------------------------------

    Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et 
seq.), the Economic Development Administration (EDA) has received 
petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. EDA has initiated 
separate investigations to determine whether increased imports into the 
United States of articles like or directly competitive with those 
produced by each firm contributed importantly to the total or partial 
separation of the firm's workers, or threat thereof, and to a decrease 
in sales or production of each petitioning firm.

        List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment
                                      [July 7, 2009 through August 6, 2009]
----------------------------------------------------------------------------------------------------------------
                                                             Date
              Firm                       Address           accepted                    Products
                                                          for filing
----------------------------------------------------------------------------------------------------------------
Mastercraft Specialties, Inc...  800 Maple Street, Red     7/24/2009  Furniture for college and military
                                  Lion, PA 17356.                      dormitories; healthcare/nursing home
                                                                       furniture for patient rooms; store
                                                                       fixtures and point of purchase displays.
SideLifts, Inc.................  1208 B Badger Street,      7/9/2009  Electric four-directional lift truck.
                                  Yorkville, IL 60560.
Federal Tool & Engineering, LLC  N52 W5338 Portland        7/23/2009  Welded, machined, stamped, fabricated and
                                  Road, Cedarburg, WI                  assembled metal components.
                                  53095.
J.B. Hill Boot Company.........  335 H. Clark Dr., El      7/23/2009  Leather footwear, cowboy boots.
                                  Paso, TX 79905.
Dymotek Corporation............  7 Main Street,            7/23/2009  Dynamic molding technologies, core
                                  Ellington, CT 06029.                 capabilities, secondary services and
                                                                       support systems.
Tru-Flex Metal Hose Corporation  2391 S. State Road        7/30/2009  Flexible metal hoses, piping, connectors
                                  263, West Lebanon, IN                and associated products.
                                  47991.
Precision Inc. D.B.A. Precision  300 SE., 14th Street,     7/20/2009  Conveyor pulleys and idlers.
 Pulley & Idler.                  Pella, IA 50219.
Overton & Sons Tool & Die,       1250 S. Old State Road    7/20/2009  Metal tools.
 Company, Inc..                   67, Mooresville, IN
                                  46158.
Conitex Sonoco, Inc............  1302 Industrial Pike,     7/21/2009  Paper cones and tubes for spun yarn, and
                                  Gastonia, NC 28052-                  corrugated pallets.
                                  0010.
C.R. Hudgins Plating, Inc......  3600 Candlers Mtn.        7/29/2009  Electroplating, coating and anodizing
                                  Rd., Lynchburg, VA                   metals services.
                                  24506.

[[Page 41399]]

 
Flow Sciences, Inc.............  2025 Mercantile Drive,    7/23/2009  Safety enclosures; materials include
                                  Leland, NC 28451.                    acrylic, polypropylene, lab-grade
                                                                       phenolic, & stainless steel.
Barons Billiards, Inc..........  1127 Union Avenue,        7/21/2009  Custom pool tables. They also service and
                                  Laconia, NH 03246.                   sell all types of billiard accessories,
                                                                       air hockey, shuffleboard and ping pong
                                                                       tables and offer game room design
                                                                       services.
Ultra Heat Inc.................  1314 Perkins Ave.,         7/9/2009  Heating elements and devices.
                                  Elkhart, IN 45616.
ScyTek Laboratories, Inc.......  205 South 600 W,           7/9/2009  Biological laboratory reagent products.
                                  Logan, UT 84321.
C&C Machine, Inc...............  78 Progress Ave.,         7/23/2009  Custom precision machined prototype and
                                  Tyngsboro, MA 01879.                 production components.
Caster Concepts, Inc...........  16000 E. Michigan         7/23/2009  Casters for industrial machines and large
                                  Ave., Albion, MI                     equipment; other machined parts.
                                  49224.
Arrowhead Containers, Inc......  4330 Clary Blvd.,         7/23/2009  Corrugated boxes and displays.
                                  Kansas City, MO 64130.
Great Eagle Enterprises Corp...  6009 Manchester Road,     7/23/2009  Die & metal stamping products: brushings,
                                  St Louis, MO 63110-                  sleeves, covers, handles, enclosure
                                  1908.                                boxes, wrenches, etc.
Gemaco, Inc....................  2925 N. 7 Highway,        7/23/2009  Playing cards and table game layouts.
                                  Blue Springs, MO
                                  64014.
Lampin Corporation.............  38 River Road,            7/23/2009  Full CNC capabilities in turned parts from
                                  Uxbridge, MA 01569.                  .020 to 6diameter
                                                                       and lengths up to 36.
JEN Manufacturing, Inc.........  3 Latti Farm Road,         8/6/2009  Polyurethane foam disposable paint brushes
                                  Millbury, MA 01527.                  and roller refills.
Mar-Bal, Incorporated..........  10095 Queens Way,         7/28/2009  Thermoset custom molded parts and molding
                                  Chagrin Falls, OH                    compounds
                                  44023.
New England Forest Products....  315 Sawmill Road, P.O.    7/30/2009  Hard and softwood.
                                  Box, Greenfield, NH
                                  03047.
Burton Industries Inc..........  6202 S. State Rd.,         7/7/2009  Robotic process equipment, automation,
                                  Goodrich, MI 48438.                  fixtures and special machinery.
Acme Engineering and             P.O. Box 978,              7/7/2009  Industrial grade propeller exhaust fans,
 Manufacturing.                   Muskogee, OK 74402.                  blowers and centrifuges.
KDK Trimmings & Novelty, Inc...  47-10 32nd Place, Long    7/21/2009  Trimming for apparel. Stitched trimming
                                  Island, NY 11101.                    for women's clothing.
IP Automation, Inc.............  2818 National Place,       7/9/2009  Machined metal products.
                                  Colorado, CO 80906.
Surtech Industries, Inc........  915 Borom Road, York,     7/10/2009  Finishing services to include: powder
                                  PA 17404.                            coating, metal blasting, polishing and
                                                                       buffing, nickel braze coatings, specialty
                                                                       liquid and Teflon coatings and other
                                                                       services.
RTR Technologies, Inc..........  48 Main Street,            7/9/2009  Track heaters, contact rail heaters and
                                  Stockbridge, MA 01262.               OSC heaters and related controls,
                                                                       auxiliary and freeze protection heaters
                                                                       and related controls for rolling stock,
                                                                       passenger comfort heaters for rolling
                                                                       stock and their related controls, HVAC,
                                                                       door operation and train.
Crownlite Mfg. Corp............  1546 Ocean Ave.,           7/9/2009  Metal lighting fixtures.
                                  Bohemia, NY 11716.
Bryco Machine, Inc.............  7800 Graphics Drive,       7/7/2009  Complex state-of-the-art machined metal
                                  Tinley Park, IL 60477.               parts in both short and long production
                                                                       runs in addition to prototyping.
Finishes LTD...................  3057 Delta Drive,         7/14/2009  Anodizing and plating coatings for metal
                                  Colorado, CO 80910.                  forming operations.
Cloverdale.....................  3015 34th Street, NW.,     8/6/2009  Sausages and other prepared meat products.
                                  Mandan, ND 58554.
Claudes Sauces, Inc............  935 Loma Verde, El        7/10/2009  Meat sauces and marinades.
                                  Paso, TX 79936.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter. A written request for a hearing 
must be submitted to the Office of Performance Evaluation, Room 7009, 
Economic Development Administration, U.S. Department of Commerce, 
Washington, DC 20230, no later than ten (10) calendar days following 
publication of this notice. Please follow the procedures set forth in 
Section 315.9 of EDA's final rule (71 FR 56704) for procedures for 
requesting a public hearing. The Catalog of Federal Domestic Assistance 
official program number and title of the program under which these 
petitions are submitted is 11.313, Trade Adjustment Assistance.

    Dated: August 11, 2009.
William P. Kittredge,
Program Officer for TAA.
[FR Doc. E9-19712 Filed 8-14-09; 8:45 am]
BILLING CODE 3510-24-P