Certain New Chemicals; Receipt and Status Information, 34571-34575 [E9-16928]
Download as PDF
<![CDATA[
34571
Federal Register / Vol. 74, No. 135 / Thursday, July 16, 2009 / Notices
II.—1 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 5/26/09 TO 6/12/09
T–09–0012
05/29/09
Projected
Notice
End Date
Manufacturer/Importer
07/12/09
Received
Date
Case No.
Cytec Industries Inc.
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(G) Polyester binding resin
(G) Epoxidized fatty acids, polymer
with organic acids and alcohols
compd. with amine alcohol
CBI) on the Notices of Commencement
to manufacture received:
III.—14 NOTICES OF COMMENCEMENT FROM: 5/26/09 TO 6/12/09
Case No.
Commencement
Notice End Date
Received Date
P–00–0510
P–04–0006
P–07–0460
P–08–0263
05/27/09
06/05/09
06/04/09
06/10/09
04/28/09
04/30/09
05/28/09
05/23/09
P–08–0547
P–08–0727
06/04/09
05/26/09
06/01/09
05/15/09
P–09–0008
06/09/09
05/26/09
P–09–0103
06/03/09
05/21/09
P–09–0171
P–09–0182
06/08/09
06/08/09
05/19/09
05/27/09
P–09–0184
P–09–0190
06/09/09
06/09/09
05/28/09
06/02/09
P–09–0205
P–09–0206
06/02/09
05/28/09
05/13/09
05/20/09
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: July 9, 2009.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E9–16927 Filed 7–15–09; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
erowe on DSK5CLS3C1PROD with NOTICES
[EPA–HQ–OPPT–2009–0507; FRL–8428–4]
Certain New Chemicals; Receipt and
Status Information
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
VerDate Nov<24>2008
15:08 Jul 15, 2009
Jkt 217001
Chemical
(G) Anionic oil modified polyurethane dispersion
(G) Arylphosphine copper iodide
(G) Polyoxyethylene alkyl ether phosphate
(S) Ethanol, 2,2′-[[3-[(2-hydroxyethyl)amino]propyl]imino]bis-, N-(hydrogenated
tallow alkyl) derivates
(G) Polyether urethane block copolymer compound with unsaturated fatty acids
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer, cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated
(S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with 1,3dioxolan-2-one,
1,6-hexanediol,
hydrazine,
5-isocyanato-1(isocyanatomethyl)-1,3,3-trimethylcyclohexane and 1,5-pentanediol, ethanolamine-blocked, compounds with triisopropanolamine
(G) Formaldehyde, polymers with alkyl aromatic phenol, cycloaliphatic-phenol
polymer glycidyl ether, epichlorohydrin and aromatic diol, acrylic
cycloaliphatic carboxylates.
(G) Halogenated carbamyal benzoyl alkyl sulfamide
(G) 2-propenoic acid, 2-methyl-, polymer with ethenylbenzene, ethyl-2propenoate, formaldehyde, 2-hydroxyethyl 2-propenoate, methyl 2-methyl-2propenoate and substituted monoheterocycle, tert-bu2ethylhexaneperoxoateinitiated, compounds with 2(dimethylamino)ethanol
(G) Polyester polyurethane acrylate oligomer
(S) Fatty acids, C18-unsaturated, dimers, di-me esters, hydrogenated, bis[4(acetyloxy)benzoates]
(G) Quaternary ammonium compound
(G) Alkymethacrylate
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from June 15, 2009
through July 3, 2009, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before August
17, 2009.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2009–0507, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2009–0507.
E:\FR\FM\16JYN1.SGM
16JYN1
erowe on DSK5CLS3C1PROD with NOTICES
34572
Federal Register / Vol. 74, No. 135 / Thursday, July 16, 2009 / Notices
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2009–0507. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
website to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
VerDate Nov<24>2008
15:08 Jul 15, 2009
Jkt 217001
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone number
of the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
PO 00000
Frm 00024
Fmt 4703
Sfmt 4703
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from June 15, 2009
through July 3, 2009, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
and TMEs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
E:\FR\FM\16JYN1.SGM
16JYN1
34573
Federal Register / Vol. 74, No. 135 / Thursday, July 16, 2009 / Notices
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit I.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I.—44 PREMANUFACTURE NOTICES RECEIVED FROM: 6/15/09 TO 7/3/09
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
06/12/09
09/09/09
CBI
(G) Thermoset adhesive additive
P–09–0425
06/15/09
09/12/09
Grafil, Inc.
(S) Precursor for carbonization/production of carbon fiber
P–09–0426
06/16/09
09/13/09
CBI
P–09–0427
06/16/09
09/13/09
CBI
(S) Site limited, raw material, fully
consumed import only
(S) Epoxy adhesive system for production of electronic waters
P–09–0428
P–09–0429
P–09–0430
06/18/09
06/18/09
06/18/09
09/15/09
09/15/09
09/15/09
P–09–0431
06/18/09
09/15/09
P–09–0432
06/18/09
09/15/09
P–09–0433
06/18/09
09/15/09
P–09–0434
06/19/09
09/16/09
CBI
CBI
Spectra Colors
poration
Spectra Colors
poration
Spectra Colors
poration
Spectra Colors
poration
Firmenich Inc.
P–09–0435
P–09–0436
06/19/09
06/19/09
09/16/09
09/16/09
Mane, USA
CBI
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
(G) Perfumery ingredient
(G) Lubricant additive
P–09–0437
06/19/09
09/16/09
Cytec Industries Inc.
(G) Binding resin
P–09–0438
06/19/09
09/16/09
Cytec Industries Inc.
(G) Binding resin
P–09–0439
06/19/09
09/16/09
CBI
P–09–0440
erowe on DSK5CLS3C1PROD with NOTICES
P–09–0424
06/22/09
09/19/09
CBI
P–09–0441
06/23/09
09/20/09
CBI
P–09–0442
06/25/09
09/22/09
CBI
P–09–0443
06/25/09
09/22/09
CBI
(S) Metal pre-treatment; coating formulations; filler treatment
(G) Unsaturated polyester resin for
filled and fiber reinforced composites
(G) Blocked polyurethane prepolymer
for heat curing metal assembly.
(G) Used in the manufacture of polyurethane foam
(G) Used in the manufacture of polyurethane foam
VerDate Nov<24>2008
15:08 Jul 15, 2009
Jkt 217001
PO 00000
Chemical
(S) Siloxanes and silicones, di-me, bu
groupand
3-[2-(3carboxymethylene-1oxopropoxy)ethoxy]propyl
groupterminated
(S) 2-propenoic acid, 2-methyl-, polymer with 2-propenamide and 2propenenitrile
(G) Branched and linear alcohols
Cor-
(G) Coating component
(G) Open-non-dispersive uses
(G) Dye for washable ink systems
(G)
Phenol,
4,4′-(1methylethylidene)bis-, polymer with
2-(chloromethyl)oxirane,
reaction
products with dithiol
(G) Mixed metal oxide complex
(G) Silylated polymer
(G) Polymeric monoazo compound
Cor-
(G) Dye for washable ink systems
(G) Polymeric monoazo compound
Cor-
(G) Dye for washable ink systems
Cor-
(G) Dye for washable ink systems
(G)
Polymeric
monoazo
triphenylmethane
(G) Polymeric triphenylmethane
Frm 00025
Fmt 4703
Sfmt 4703
E:\FR\FM\16JYN1.SGM
(S) 7-octen-4-one, 2,6-dimethyl-
(S) 6,8-dimethyl-7-nonenal
(G) 2-propenoic acid, 2-methyl-,
C12–15-branched and linear alkyl
esters, telomers with alkyl 2[[(alkylthio)thioxomethyl]thio]-2alkanoate, aminoalkyl methacrylate
and alkyl methacrylate, tert-bu 2ethylhexanoperoxoate-initiated
(G) Fatty acids, polymers with substituted
carbocycles,
alkyldiol,
alkylaldehyde,
substituted
heterocycle, substituted alkyldiol,
polymd. modified oil and resin
acids, carboxymethyl ethers compounds with substituted alcohol.
(G) Fatty acids, polymers with substituted
carbocycles,
alkyldiol,
alkylaldehyde,
substituted
heterocycle, substituted alkyldiol,
polymd. modified oil and resin
acids, carboxymethyl esters compounds with substituted alcohol.
(G)
Silicones,
aminomodified,
hydroformiates
(G) Unsaturated polyester resin
(G) Blocked polyurethane prepolymer
(G) Organomodified silanic hydrogen
fluid
(G) Modified silicone polyether copolymer
16JYN1
34574
Federal Register / Vol. 74, No. 135 / Thursday, July 16, 2009 / Notices
I.—44 PREMANUFACTURE NOTICES RECEIVED FROM: 6/15/09 TO 7/3/09—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G)
Unprotonated
polymer:
polydimethylsiloxane hydroxyalkyl
terminate,
polymers
with
diisocyanate and aminoalkyl groups
aliphatic amine blocked; protonated
polymer:
polydimethylsiloxane
hydroxyalkyl terminated, polymers
with diisocyanate and aminoalkyl
groups aliphatic amine blocked,
acetates
(G)
Unprotonated
polymer:
polydimethylsiloxane hydroxyalkyl
terminate,
polymers
with
diisocyanate and aminoalkyl groups
aliphatic amine blocked; protonated
polymer:
polydimethylsiloxane
hydroxyalkyl terminated, polymers
with diisocyanate and aminoalkyl
groups aliphatic amine blocked,
acetates
(G) Toluene halo alkyl sulfo derivative
sodium salt
(G) Sodium olefin sulfonate derivative
(G) Sodium olefin sulfonate derivative
(S) 1,4-cyclohexanedicarboxylic acid,
trans(G) Methyl methacrylate silyn siloxy
methacrylate terpolymer
(G)
Butanamide,
N-[substituted
phenyl][(alkoxynitrophenyl)diazenyl]-3-oxo(S) 13-decosen-1-amine, N, N-dimethyl-(13Z)(G) Urethane prepolymer
(G) Polyurethane
06/25/09
09/22/09
Wacker Chemical Corporation
(S) Unprotonated polymer: chemical
intermediate; protonated polymer
textile softener
P–09–0445
06/25/09
09/02/09
Wacker Chemical Corporation
(S) Unprotonated polymer: chemical
intermediate; protonated polymer
textile softener
P–09–0446
06/22/09
09/19/09
Weylchem US Inc.
(G) Intermediate
P–09–0447
P–09–0448
P–09–0449
06/24/09
06/24/09
06/24/09
09/21/09
09/21/09
09/21/09
06/25/09
09/22/09
P–09–0451
06/25/09
09/22/09
CBI
CBI
Eastman Chemical
Company
Ricoh Americas Corporation
CBI
(G) Processin aid
(G) Processin aid
(G) Chemical intermediate
P–09–0450
P–09–0452
06/29/09
09/26/09
P–09–0453
P–09–0454
06/30/09
06/30/09
09/27/09
09/27/09
Oil Chem Technologies, Inc.
CBI
CBI
P–09–0455
06/30/09
09/27/09
06/30/09
09/27/09
P–09–0459
P–09–0460
P–09–0461
P–09–0462
P–09–0463
06/29/09
06/29/09
06/29/09
06/29/09
06/30/09
09/26/09
09/26/09
09/26/09
09/26/09
09/27/09
The Dow Chemical
Company
The Dow Chemical
Company
CBI
CBI
CBI
CBI
CBI
(S) Intermediate for oil recovery surfactant
(G) Adhesive Component
(G) Dispersive use for solventborne
coatings systems
(S) Intermediate
P–09–0456
P–09–0464
06/29/09
09/26/09
CBI
P–09–0465
06/29/09
09/26/09
CBI
P–09–0466
06/29/09
09/26/09
CBI
P–09–0467
06/29/09
09/26/09
CBI
P–09–0468
06/29/09
09/26/09
CBI
P–09–0469
erowe on DSK5CLS3C1PROD with NOTICES
P–09–0444
06/29/09
09/26/09
CBI
In Table II of this unit, EPA provides
the following information (to the extent
VerDate Nov<24>2008
15:08 Jul 15, 2009
Jkt 217001
(S) For use in copy machine developer
(G) Dispersion additive
use in energy produc-
(G) Ferrate (4-) [heteropolycycle]-ammonium compound
(G)
Sulfo-substituted
metal
heteropolycycle-mixed sodium salt
(G) Amine carboxylate
(G) Amine carboxylate
(G) Amine carboxylate
(G) Amine carboxylate
(G) Salt of polymer of methylenebis
[isocyanatocarbomonocycle],
alkanepolyols and amine derivatives
(G) Ether amine phosphonate salt
use in energy produc-
(G) Ether amine phosphonate salt
use in energy produc-
(G) Ether amine phosphonate salt
use in energy produc-
(G) Ether amine phosphonate salt
use in energy produc-
(G) Ether amine phosphonate salt
use in energy produc-
(G) Ether amine phosphonate salt
(S) Intermediate
(G) Polyurethane foam catalyst
(G) Polyurethane foam catalyst
(G) Polyurethane foam catalyst
(G) Polyurethane foam catalyst
(G) Specialty additive contained in an
article
(G) Contained
tion
(G) Contained
tion
(G) Contained
tion
(G) Contained
tion
(G) Contained
tion
(G) Contained
tion
that such information is not claimed as
CBI) on the TMEs received:
PO 00000
Frm 00026
Fmt 4703
Sfmt 4703
E:\FR\FM\16JYN1.SGM
16JYN1
34575
Federal Register / Vol. 74, No. 135 / Thursday, July 16, 2009 / Notices
II.—2 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 6/15/09 TO 7/3/09
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
T–09–0013
06/19/09
08/02/09
Cytec Industries Inc.
(G) Binding resin
T–09–0014
06/19/09
08/02/09
Cytec Industries Inc.
Chemical
(G) Binding resin
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
(G) Fatty acids, polymers with substituted
carbocycles,
alkyldiol,
alkyladehyde,
substituted
heterocycle, substituted alkyldiol,
polymd. modified oil and resin
acids, carboxymethyl esters compounds with substituted alcohol.
(G) Fatty acids, polymers with substituted
carbocycle,
alkyldiol,
alkylaldehyde,
substituted
heterocycle, substituted alkyldiol,
polymd. modified oil and resin
acids,
carboxymethyl
ethers
compds. with substituted alcohol.
CBI) on the Notices of Commencement
to manufacture received:
III.—9 NOTICES OF COMMENCEMENT FROM: 6/15/09 TO 7/3/09
Case No.
Commencement
Notice End Date
Received Date
P–04–0395
P–06–0349
P–07–0303
06/17/09
06/16/09
06/23/09
06/08/09
05/28/09
05/25/09
P–08–0446
P–08–0523
P–08–0751
P–09–0110
P–09–0192
06/18/09
06/23/09
06/22/09
06/16/09
06/16/09
06/01/09
05/21/09
06/06/09
05/12/09
06/10/09
P–09–0203
06/15/09
05/20/09
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: July 9, 2009.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E9–16928 Filed 7–15–09; 8:45 am]
BILLING CODE 6560–50–S
Chemical
(G) Water soluble polymer dispersion
(G) Fatty acid polymer with aliphatic diol and aromatic diacid
(G) 2-propenoic acid, 1,1′-[2,2-bis(hydroxymethyl)-1,3-propanediyl] ester, polymer with multifunctional isocyanate,pentaerythritol triacrylate-blocked
(G) Poly(oxyalkylene) azo benzamide
(G) TDI polyester polypropylene ethylene copolymer
(G) Fluorinated acrylic copolymer
(G) Alkyl ammonium tungstate complex
(S) 1. 1,2,4,5-benzenetetracarboxylic acid, 1,4-bis[2-[(2-methyl-1-oxo-2-propen1-yl)oxy]-1-[[(2-methyl-1-oxo-2-propen-1-yl)oxy]methyl]ethyl] ester. (S) 2.
1,2,4,5-benzenetetracarboxylic acid, 1,5-bis[2-[(2-methyl-1-oxo-2-propen-1yl)oxy]-1-[[(2-methyl-1-oxo-2-propen-1-yl)oxy]methyl]ethyl] ester.
(G) Unsaturated urethane methacrylate
ENVIRONMENTAL PROTECTION
AGENCY
Ambient Air Quality Standards for
nitrogen dioxide.
[FRL–8932–1]
DATES: The teleconference will be held
on Monday, August 10, 2009 from 1
p.m. to 4 p.m. (Eastern Daylight Time).
Science Advisory Board Staff Office;
Clean Air Scientific Advisory
Committee (CASAC); Notification of a
Public Advisory Committee
Teleconference of the CASAC Oxides
of Nitrogen Primary NAAQS Review
Panel
erowe on DSK5CLS3C1PROD with NOTICES
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: The Environmental Protection
Agency (EPA) Science Advisory Board
(SAB) Staff Office announces a public
teleconference of the Clean Air
Scientific Advisory Committee’s
(CASAC) Oxides of Nitrogen Primary
NAAQS Review Panel (Panel) to
provide comments concerning EPA’s
proposed revisions to the National
VerDate Nov<24>2008
15:08 Jul 15, 2009
Jkt 217001
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
ADDRESSES: The public teleconference
will be conducted by telephone only.
FOR FURTHER INFORMATION CONTACT:
Members of the public who wish to
obtain the call-in number and access
code to participate in the teleconference
may contact Dr. Angela Nugent,
Designated Federal Officer (DFO), EPA
Science Advisory Board (1400F), U.S.
Environmental Protection Agency, 1200
Pennsylvania Avenue, NW.,
Washington, DC 20460; via telephone/
voice mail (202) 343–9981; fax (202)
233–0643; or e-mail at
nugent.angela@epa.gov. General
information concerning the CASAC can
be found on the EPA Web site at
https://www.epa.gov/casac.
SUPPLEMENTARY INFORMATION:
E:\FR\FM\16JYN1.SGM
16JYN1
]]>Agencies
[Federal Register Volume 74, Number 135 (Thursday, July 16, 2009)]
[Notices]
[Pages 34571-34575]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-16928]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2009-0507; FRL-8428-4]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from June 15, 2009 through July 3, 2009, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before August 17, 2009.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2009-0507, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2009-0507.
[[Page 34572]]
The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the DCO's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2009-0507. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
https://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at https://www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from June 15, 2009 through July 3,
2009, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you
[[Page 34573]]
are interested in information that is not included in the following
tables, you may contact EPA as described in Unit I. to access
additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I.--44 Premanufacture Notices Received From: 6/15/09 to 7/3/09
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-09-0424 06/12/09 09/09/09 CBI (G) Thermoset (S) Siloxanes and
adhesive additive silicones, di-me, bu
group- and 3-[2-(3-
carboxymethylene-1-
oxopropoxy)ethoxy]pr
opyl group-
terminated
P-09-0425 06/15/09 09/12/09 Grafil, Inc. (S) Precursor for (S) 2-propenoic acid,
carbonization/ 2-methyl-, polymer
production of carbon with 2-propenamide
fiber and 2-propenenitrile
P-09-0426 06/16/09 09/13/09 CBI (S) Site limited, raw (G) Branched and
material, fully linear alcohols
consumed import only
P-09-0427 06/16/09 09/13/09 CBI (S) Epoxy adhesive (G) Phenol, 4,4'-(1-
system for methylethylidene)bis-
production of , polymer with 2-
electronic waters (chloromethyl)oxiran
e, reaction products
with dithiol
P-09-0428 06/18/09 09/15/09 CBI (G) Coating component (G) Mixed metal oxide
complex
P-09-0429 06/18/09 09/15/09 CBI (G) Open-non- (G) Silylated polymer
dispersive uses
P-09-0430 06/18/09 09/15/09 Spectra Colors (G) Dye for washable (G) Polymeric monoazo
Corporation ink systems compound
P-09-0431 06/18/09 09/15/09 Spectra Colors (G) Dye for washable (G) Polymeric monoazo
Corporation ink systems compound
P-09-0432 06/18/09 09/15/09 Spectra Colors (G) Dye for washable (G) Polymeric monoazo
Corporation ink systems triphenylmethane
P-09-0433 06/18/09 09/15/09 Spectra Colors (G) Dye for washable (G) Polymeric
Corporation ink systems triphenylmethane
P-09-0434 06/19/09 09/16/09 Firmenich Inc. (S) Aroma for use in (S) 7-octen-4-one,
fragrance mixtures, 2,6-dimethyl-
which in turn are
used in perfumes,
soaps, cleansers,
etc.
P-09-0435 06/19/09 09/16/09 Mane, USA (G) Perfumery (S) 6,8-dimethyl-7-
ingredient nonenal
P-09-0436 06/19/09 09/16/09 CBI (G) Lubricant (G) 2-propenoic acid,
additive 2-methyl-, C12 15-
branched and linear
alkyl esters,
telomers with alkyl
2-
[[(alkylthio)thioxom
ethyl]thio]-2-
alkanoate,
aminoalkyl
methacrylate and
alkyl methacrylate,
tert-bu 2-
ethylhexanoperoxoate-
initiated
P-09-0437 06/19/09 09/16/09 Cytec Industries Inc. (G) Binding resin (G) Fatty acids,
polymers with
substituted
carbocycles,
alkyldiol,
alkylaldehyde,
substituted
heterocycle,
substituted
alkyldiol, polymd.
modified oil and
resin acids,
carboxymethyl ethers
compounds with
substituted alcohol.
P-09-0438 06/19/09 09/16/09 Cytec Industries Inc. (G) Binding resin (G) Fatty acids,
polymers with
substituted
carbocycles,
alkyldiol,
alkylaldehyde,
substituted
heterocycle,
substituted
alkyldiol, polymd.
modified oil and
resin acids,
carboxymethyl esters
compounds with
substituted alcohol.
P-09-0439 06/19/09 09/16/09 CBI (S) Metal pre- (G) Silicones,
treatment; coating aminomodified,
formulations; filler hydroformiates
treatment
P-09-0440 06/22/09 09/19/09 CBI (G) Unsaturated (G) Unsaturated
polyester resin for polyester resin
filled and fiber
reinforced
composites
P-09-0441 06/23/09 09/20/09 CBI (G) Blocked (G) Blocked
polyurethane polyurethane
prepolymer for heat prepolymer
curing metal
assembly.
P-09-0442 06/25/09 09/22/09 CBI (G) Used in the (G) Organomodified
manufacture of silanic hydrogen
polyurethane foam fluid
P-09-0443 06/25/09 09/22/09 CBI (G) Used in the (G) Modified silicone
manufacture of polyether copolymer
polyurethane foam
[[Page 34574]]
P-09-0444 06/25/09 09/22/09 Wacker Chemical (S) Unprotonated (G) Unprotonated
Corporation polymer: chemical polymer:
intermediate; polydimethylsiloxane
protonated polymer hydroxyalkyl
textile softener terminate, polymers
with diisocyanate
and aminoalkyl
groups aliphatic
amine blocked;
protonated polymer:
polydimethylsiloxane
hydroxyalkyl
terminated, polymers
with diisocyanate
and aminoalkyl
groups aliphatic
amine blocked,
acetates
P-09-0445 06/25/09 09/02/09 Wacker Chemical (S) Unprotonated (G) Unprotonated
Corporation polymer: chemical polymer:
intermediate; polydimethylsiloxane
protonated polymer hydroxyalkyl
textile softener terminate, polymers
with diisocyanate
and aminoalkyl
groups aliphatic
amine blocked;
protonated polymer:
polydimethylsiloxane
hydroxyalkyl
terminated, polymers
with diisocyanate
and aminoalkyl
groups aliphatic
amine blocked,
acetates
P-09-0446 06/22/09 09/19/09 Weylchem US Inc. (G) Intermediate (G) Toluene halo
alkyl sulfo
derivative sodium
salt
P-09-0447 06/24/09 09/21/09 CBI (G) Processin aid (G) Sodium olefin
sulfonate derivative
P-09-0448 06/24/09 09/21/09 CBI (G) Processin aid (G) Sodium olefin
sulfonate derivative
P-09-0449 06/24/09 09/21/09 Eastman Chemical (G) Chemical (S) 1,4-
Company intermediate cyclohexanedicarboxy
lic acid, trans-
P-09-0450 06/25/09 09/22/09 Ricoh Americas (S) For use in copy (G) Methyl
Corporation machine developer methacrylate silyn
siloxy methacrylate
terpolymer
P-09-0451 06/25/09 09/22/09 CBI (G) Dispersion (G) Butanamide, N-
additive [substituted phenyl]-
[(alkoxynitrophenyl)
diazenyl]-3-oxo-
P-09-0452 06/29/09 09/26/09 Oil Chem (S) Intermediate for (S) 13-decosen-1-
Technologies, Inc. oil recovery amine, N, N-dimethyl-
surfactant (13Z)-
P-09-0453 06/30/09 09/27/09 CBI (G) Adhesive (G) Urethane
Component prepolymer
P-09-0454 06/30/09 09/27/09 CBI (G) Dispersive use (G) Polyurethane
for solventborne
coatings systems
P-09-0455 06/30/09 09/27/09 The Dow Chemical (S) Intermediate (G) Ferrate (4-)
Company [heteropolycycle]-
ammonium compound
P-09-0456 06/30/09 09/27/09 The Dow Chemical (S) Intermediate (G) Sulfo-substituted
Company metal
heteropolycycle-
mixed sodium salt
P-09-0459 06/29/09 09/26/09 CBI (G) Polyurethane foam (G) Amine carboxylate
catalyst
P-09-0460 06/29/09 09/26/09 CBI (G) Polyurethane foam (G) Amine carboxylate
catalyst
P-09-0461 06/29/09 09/26/09 CBI (G) Polyurethane foam (G) Amine carboxylate
catalyst
P-09-0462 06/29/09 09/26/09 CBI (G) Polyurethane foam (G) Amine carboxylate
catalyst
P-09-0463 06/30/09 09/27/09 CBI (G) Specialty (G) Salt of polymer
additive contained of methylenebis
in an article [isocyanatocarbomono
cycle],
alkanepolyols and
amine derivatives
P-09-0464 06/29/09 09/26/09 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-09-0465 06/29/09 09/26/09 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-09-0466 06/29/09 09/26/09 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-09-0467 06/29/09 09/26/09 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-09-0468 06/29/09 09/26/09 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-09-0469 06/29/09 09/26/09 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
[[Page 34575]]
II.--2 Test Marketing Exemption Notices Received From: 6/15/09 to 7/3/09
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-09-0013 06/19/09 08/02/09 Cytec Industries Inc. (G) Binding resin (G) Fatty acids,
polymers with
substituted
carbocycles,
alkyldiol,
alkyladehyde,
substituted
heterocycle,
substituted
alkyldiol, polymd.
modified oil and
resin acids,
carboxymethyl esters
compounds with
substituted alcohol.
T-09-0014 06/19/09 08/02/09 Cytec Industries Inc. (G) Binding resin (G) Fatty acids,
polymers with
substituted
carbocycle,
alkyldiol,
alkylaldehyde,
substituted
heterocycle,
substituted
alkyldiol, polymd.
modified oil and
resin acids,
carboxymethyl ethers
compds. with
substituted alcohol.
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III.--9 Notices of Commencement From: 6/15/09 to 7/3/09
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-04-0395 06/17/09 06/08/09 (G) Water soluble polymer
dispersion
P-06-0349 06/16/09 05/28/09 (G) Fatty acid polymer
with aliphatic diol and
aromatic diacid
P-07-0303 06/23/09 05/25/09 (G) 2-propenoic acid, 1,1'-
[2,2-bis(hydroxymethyl)-
1,3-propanediyl] ester,
polymer with
multifunctional
isocyanate,pentaerythrito
l triacrylate-blocked
P-08-0446 06/18/09 06/01/09 (G) Poly(oxyalkylene) azo
benzamide
P-08-0523 06/23/09 05/21/09 (G) TDI polyester
polypropylene ethylene
copolymer
P-08-0751 06/22/09 06/06/09 (G) Fluorinated acrylic
copolymer
P-09-0110 06/16/09 05/12/09 (G) Alkyl ammonium
tungstate complex
P-09-0192 06/16/09 06/10/09 (S) 1. 1,2,4,5-
benzenetetracarboxylic
acid, 1,4-bis[2-[(2-
methyl-1-oxo-2-propen-1-
yl)oxy]-1-[[(2-methyl-1-
oxo-2-propen-1-
yl)oxy]methyl]ethyl]
ester. (S) 2. 1,2,4,5-
benzenetetracarboxylic
acid, 1,5-bis[2-[(2-
methyl-1-oxo-2-propen-1-
yl)oxy]-1-[[(2-methyl-1-
oxo-2-propen-1-
yl)oxy]methyl]ethyl]
ester.
P-09-0203 06/15/09 05/20/09 (G) Unsaturated urethane
methacrylate
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: July 9, 2009.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E9-16928 Filed 7-15-09; 8:45 am]
BILLING CODE 6560-50-S
