Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Clay Ceramics Manufacturing (Renewal), EPA ICR Number 2023.04, OMB Control Number 2060-0513, 31728-31729 [E9-15691]

Download as PDF 31728 Federal Register / Vol. 74, No. 126 / Thursday, July 2, 2009 / Notices technical person listed under FOR FURTHER INFORMATION CONTACT. Dated: June 26, 2009. Mary E. Henigin, Acting Director, Sector Policies and Programs Division. [FR Doc. E9–15686 Filed 7–1–09; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2008–0369; FRL–8925–4] Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Clay Ceramics Manufacturing (Renewal), EPA ICR Number 2023.04, OMB Control Number 2060–0513 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.), this document announces that an Information Collection Request (ICR) has been forwarded to the Office of Management and Budget (OMB) for review and approval. This is a request to renew an existing approved collection. The ICR, which is abstracted below, describes the nature of the collection and the estimated burden and cost. DATES: Additional comments may be submitted on or before August 3, 2009. ADDRESSES: Submit your comments, referencing docket ID number EPA– OECA–2008–0369, to (1) EPA online using https://www.regulations.gov (our preferred method), or by e-mail to docket.oeca@epa.gov, or by mail to: EPA Docket Center (EPA/DC), Environmental Protection Agency, Enforcement and Compliance Docket and Information Center, mail code 28221T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) OMB at: Office of Information and Regulatory Affairs, Office of Management and Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street, NW., Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Sounjay Gairola, Office of Enforcement and Compliance Assurance, Mail Code 2242A, Environmental Protection Agency, 1200 Pennsylvania Avenue, NW., Washington, DC 20460; telephone number: (202) 564–4003; e-mail address: gairola.sounjay@epa.gov. SUPPLEMENTARY INFORMATION: EPA has submitted the following ICR to OMB for review and approval according to the VerDate Nov<24>2008 15:35 Jul 01, 2009 Jkt 217001 procedures prescribed in 5 CFR 1320.12. On May 30, 2008 (73 FR 31088), EPA sought comments on this ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional comments on this ICR should be submitted to EPA and OMB within 30 days of this notice. EPA has established a public docket for this ICR under docket ID number EPA–HQ–OECA–2008–0369, which is available for public viewing online at https://www.regulations.gov, in person viewing at the Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC), EPA West, Room 3334, 1301 Constitution Avenue, NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566–1744, and the telephone number for the Enforcement and Compliance Docket is (202) 566–1752. Use EPA’s electronic docket and comment system at https:// www.regulations.gov, to submit or view public comments, access the index listing of the contents of the docket, and to access those documents in the docket that are available electronically. Once in the system, select ‘‘docket search,’’ then key in the docket ID number identified above. Please note that EPA’s policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing at https://www.regulations.gov, as EPA receives them and without change, unless the comment contains copyrighted material, Confidential Business Information (CBI), or other information whose public disclosure is restricted by statute. For further information about the electronic docket, go to https://www.regulations.gov. Title: NESHAP for Clay Ceramics Manufacturing (Renewal). ICR Numbers: EPA ICR Number 2023.04, OMB Control Number 2060– 0513. ICR Status: This ICR is scheduled to expire on August 31, 2009. Under OMB regulations, the Agency may continue to conduct or sponsor the collection of information while this submission is pending at OMB. An Agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The OMB control numbers for EPA’s regulations in title 40 of the CFR, after appearing in the Federal Register when approved, are listed in 40 CFR part 9, and displayed either by publication in the Federal Register or by other appropriate means, such as on the PO 00000 Frm 00042 Fmt 4703 Sfmt 4703 related collection instrument or form, if applicable. The display of OMB control numbers in certain EPA regulations is consolidated in 40 CFR part 9. Abstract: The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Clay Ceramics Manufacturing (40 CFR part 63, subpart KKKKK) were proposed on July 22, 2002 (67 FR 47893) and promulgated on May 16, 2003 (67 FR 26738). The affected entities are subject to the General Provisions of the NESHAP at 40 CFR part 63, subpart A, and any changes, or additions to the General Provisions specified at 40 CFR part 63, subpart KKKKK. Owners or operators of the affected facilities must submit a one-time-only report of any physical or operational changes, initial performance tests, and periodic reports and results. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Reports, at a minimum, are required semiannually. Burden Statement: The annual public reporting and recordkeeping burden for this collection of information is estimated to average 17 hours per response. Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously applicable instructions and requirements which have subsequently changed; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information. Respondents/Affected Entities: Clay ceramics manufacturing facilities. Estimated Number of Respondents: 10. Frequency of Response: Initially, occasionally, and semiannually. Estimated Total Annual Hour Burden: 527. Estimated Total Annual Cost: $45,702, which includes labor costs of $42,532, O&M costs of $2,468, and annualized capital/startup costs of $702. Changes in the Estimates: There is no change in the total estimated burden E:\FR\FM\02JYN1.SGM 02JYN1 Federal Register / Vol. 74, No. 126 / Thursday, July 2, 2009 / Notices currently identified in the OMB Inventory of Approved ICR Burdens. Apparent differences of less than 500 hours are attributable to rounding; in previous years, hours were rounded to the nearest thousand; this ICR presents more exact figures. Dated: June 26, 2009. John Moses, Director, Collection Strategies Division. [FR Doc. E9–15691 Filed 7–1–09; 8:45 am] BILLING CODE 6560–50–P ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2009–0124; FRL–8925–5] Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; Auto Body Compliance Assessment Pilot Project (New); EPA ICR No. 2344.01, OMB Control No. 2020–NEW AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: In compliance with the Paperwork Reduction Act (PRA) (44 U.S.C. 3501 et seq.), this document announces that an Information Collection Request (ICR) has been forwarded to the Office of Management and Budget (OMB) for review and approval. This is a request for a new collection. The ICR, which is abstracted below, describes the nature of the information collection and its estimated burden and cost. DATES: Additional comments may be submitted on or before August 3, 2009. ADDRESSES: Submit your comments, referencing Docket ID No. EPA HQ– OECA–2009–0124, to (1) EPA online using www.regulations.gov (our preferred method), by e-mail to docket.oeca@epa.gov, or by mail to: EPA Docket Center (EPA/DC), Environmental Protection Agency, Enforcement and Compliance Docket and Information Center, mail code 28221T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) OMB by mail to: Office of Information and Regulatory Affairs, Office of Management and Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street, NW., Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Kenneth Harmon, Office of Compliance, (2224A), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone VerDate Nov<24>2008 15:35 Jul 01, 2009 Jkt 217001 number: (202) 564–7049; fax number: (202) 564–7083; e-mail address: harmon.kenneth@epa.gov. EPA has submitted the following ICR to OMB for review and approval according to the procedures prescribed in 5 CFR 1320.12. On February 25, 2009 (74 FR 8534), EPA sought comments on this ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional comments on this ICR should be submitted to EPA and OMB within 30 days of this notice. EPA has established a public docket for this ICR under Docket ID No. EPA– HQ–OECA–2009–0124, which is available for online viewing at www.regulations.gov, or in person viewing at the OECA Docket in the EPA Docket Center (EPA/DC), EPA West, Room 3334, 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is 202–566–1744, and the telephone number for OECA Docket is 202–566– 1752. Use EPA’s electronic docket and comment system at www.regulations.gov, to submit or view public comments, access the index listing of the contents of the docket, and to access those documents in the docket that are available electronically. Once in the system, select ‘‘docket search,’’ then key in the docket ID number identified above. Please note that EPA’s policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing at www.regulations.gov as EPA receives them and without change, unless the comment contains copyrighted material, confidential business information (CBI), or other information whose public disclosure is restricted by statute. For further information about the electronic docket, go to www.regulations.gov. Title: Auto Body Compliance Assessment Pilot Project (New). ICR Numbers: EPA ICR No. 2344.01, OMB Control No. 2020–NEW. ICR Status: This ICR is for a new information collection activity. An Agency may not conduct or sponsor, and a person is not required to respond to, a collection of information, unless it displays a currently valid OMB control number. The OMB control numbers for EPA’s regulations in title 40 of the CFR, after appearing in the Federal Register when approved, are listed in 40 CFR part 9, are displayed either by publication in the Federal Register or by other appropriate means, such as on SUPPLEMENTARY INFORMATION: PO 00000 Frm 00043 Fmt 4703 Sfmt 4703 31729 the related collection instrument or form, if applicable. The display of OMB control numbers in certain EPA regulations is consolidated in 40 CFR part 9. Abstract: The purpose of the ICR is two-fold. First, it is to authorize the collection of information as part of a pilot study undertaken by EPA to evaluate whether and how EPA’s specific compliance assistance activities in Region 1 helped owners or operators of auto body shops improve their operations. The ICR would authorize the administration of surveys, by telephone and on-site, to a random sample of auto body shops subject to National Emission Standards for Hazardous Air Pollutants: Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources (NESHAP Subpart HHHHHH, hereinafter referred to as the Surface Coating Rule.). Specifically, the study has been designed to assess whether or not the assistance provided helped owners or operators understand these and other applicable environmental regulations, and whether or not the assistance helped owners or operators implement operational changes that improved environmental practices; including changes in behavior that resulted in the auto body shop either returning to compliance with regulations or taking steps toward achieving compliance. EPA has two objectives in collecting this information for the pilot study: (1) EPA’s primary objective is to assess the degree to which its compliance assistance activities can be correlated to improved environmental performance at auto body shops; (2) EPA’s secondary objective is to assess the validity of environmental performance information collected by telephone surveys. The Agency frequently relies on telephone surveys to gather information about environmental performance, but such self-reported data may not be accurate, and may suffer from non-response bias. The design for this study addresses both concerns. The second use for this ICR is to authorize the use of these surveys to collect anecdotal information as part of the Agency’s efforts to assess outcomes associated with the Office of Air Quality Planning and Standard’s Collision Repair Campaign (CRC). The CRC is a two-year campaign during which the EPA Headquarters Office of Air Quality Planning and Standards (OAQPS) and the ten EPA Regions will address health threats by reducing toxic auto body coating emissions at the national level. Each EPA regional office involved in the campaign will work with its respective partners (e.g., community, industry, E:\FR\FM\02JYN1.SGM 02JYN1

Agencies

[Federal Register Volume 74, Number 126 (Thursday, July 2, 2009)]
[Notices]
[Pages 31728-31729]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-15691]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2008-0369; FRL-8925-4]


Agency Information Collection Activities; Submission to OMB for 
Review and Approval; Comment Request; NESHAP for Clay Ceramics 
Manufacturing (Renewal), EPA ICR Number 2023.04, OMB Control Number 
2060-0513

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 
et seq.), this document announces that an Information Collection 
Request (ICR) has been forwarded to the Office of Management and Budget 
(OMB) for review and approval. This is a request to renew an existing 
approved collection. The ICR, which is abstracted below, describes the 
nature of the collection and the estimated burden and cost.

DATES: Additional comments may be submitted on or before August 3, 
2009.

ADDRESSES: Submit your comments, referencing docket ID number EPA-OECA-
2008-0369, to (1) EPA online using https://www.regulations.gov (our 
preferred method), or by e-mail to docket.oeca@epa.gov, or by mail to: 
EPA Docket Center (EPA/DC), Environmental Protection Agency, 
Enforcement and Compliance Docket and Information Center, mail code 
28221T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) 
OMB at: Office of Information and Regulatory Affairs, Office of 
Management and Budget (OMB), Attention: Desk Officer for EPA, 725 17th 
Street, NW., Washington, DC 20503.

FOR FURTHER INFORMATION CONTACT: Sounjay Gairola, Office of Enforcement 
and Compliance Assurance, Mail Code 2242A, Environmental Protection 
Agency, 1200 Pennsylvania Avenue, NW., Washington, DC 20460; telephone 
number: (202) 564-4003; e-mail address: gairola.sounjay@epa.gov.

SUPPLEMENTARY INFORMATION: EPA has submitted the following ICR to OMB 
for review and approval according to the procedures prescribed in 5 CFR 
1320.12. On May 30, 2008 (73 FR 31088), EPA sought comments on this ICR 
pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional 
comments on this ICR should be submitted to EPA and OMB within 30 days 
of this notice.
    EPA has established a public docket for this ICR under docket ID 
number EPA-HQ-OECA-2008-0369, which is available for public viewing 
online at https://www.regulations.gov, in person viewing at the 
Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC), 
EPA West, Room 3334, 1301 Constitution Avenue, NW., Washington, DC. The 
EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 
p.m., Monday through Friday, excluding legal holidays. The telephone 
number for the Reading Room is (202) 566-1744, and the telephone number 
for the Enforcement and Compliance Docket is (202) 566-1752.
    Use EPA's electronic docket and comment system at https://www.regulations.gov, to submit or view public comments, access the 
index listing of the contents of the docket, and to access those 
documents in the docket that are available electronically. Once in the 
system, select ``docket search,'' then key in the docket ID number 
identified above. Please note that EPA's policy is that public 
comments, whether submitted electronically or in paper, will be made 
available for public viewing at https://www.regulations.gov, as EPA 
receives them and without change, unless the comment contains 
copyrighted material, Confidential Business Information (CBI), or other 
information whose public disclosure is restricted by statute. For 
further information about the electronic docket, go to https://www.regulations.gov.
    Title: NESHAP for Clay Ceramics Manufacturing (Renewal).
    ICR Numbers: EPA ICR Number 2023.04, OMB Control Number 2060-0513.
    ICR Status: This ICR is scheduled to expire on August 31, 2009. 
Under OMB regulations, the Agency may continue to conduct or sponsor 
the collection of information while this submission is pending at OMB. 
An Agency may not conduct or sponsor, and a person is not required to 
respond to, a collection of information unless it displays a currently 
valid OMB control number. The OMB control numbers for EPA's regulations 
in title 40 of the CFR, after appearing in the Federal Register when 
approved, are listed in 40 CFR part 9, and displayed either by 
publication in the Federal Register or by other appropriate means, such 
as on the related collection instrument or form, if applicable. The 
display of OMB control numbers in certain EPA regulations is 
consolidated in 40 CFR part 9.
    Abstract: The National Emission Standards for Hazardous Air 
Pollutants (NESHAP) for Clay Ceramics Manufacturing (40 CFR part 63, 
subpart KKKKK) were proposed on July 22, 2002 (67 FR 47893) and 
promulgated on May 16, 2003 (67 FR 26738).
    The affected entities are subject to the General Provisions of the 
NESHAP at 40 CFR part 63, subpart A, and any changes, or additions to 
the General Provisions specified at 40 CFR part 63, subpart KKKKK.
    Owners or operators of the affected facilities must submit a one-
time-only report of any physical or operational changes, initial 
performance tests, and periodic reports and results. Owners or 
operators are also required to maintain records of the occurrence and 
duration of any startup, shutdown, or malfunction in the operation of 
an affected facility, or any period during which the monitoring system 
is inoperative. Reports, at a minimum, are required semiannually.
    Burden Statement: The annual public reporting and recordkeeping 
burden for this collection of information is estimated to average 17 
hours per response. Burden means the total time, effort, or financial 
resources expended by persons to generate, maintain, retain, or 
disclose or provide information to or for a Federal agency. This 
includes the time needed to review instructions; develop, acquire, 
install, and utilize technology and systems for the purposes of 
collecting, validating, and verifying information, processing and 
maintaining information, and disclosing and providing information; 
adjust the existing ways to comply with any previously applicable 
instructions and requirements which have subsequently changed; train 
personnel to be able to respond to a collection of information; search 
data sources; complete and review the collection of information; and 
transmit or otherwise disclose the information.
    Respondents/Affected Entities: Clay ceramics manufacturing 
facilities.
    Estimated Number of Respondents: 10.
    Frequency of Response: Initially, occasionally, and semiannually.
    Estimated Total Annual Hour Burden: 527.
    Estimated Total Annual Cost: $45,702, which includes labor costs of 
$42,532, O&M costs of $2,468, and annualized capital/startup costs of 
$702.
    Changes in the Estimates: There is no change in the total estimated 
burden

[[Page 31729]]

currently identified in the OMB Inventory of Approved ICR Burdens. 
Apparent differences of less than 500 hours are attributable to 
rounding; in previous years, hours were rounded to the nearest 
thousand; this ICR presents more exact figures.

    Dated: June 26, 2009.
John Moses,
Director, Collection Strategies Division.
[FR Doc. E9-15691 Filed 7-1-09; 8:45 am]
BILLING CODE 6560-50-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.