Airworthiness Directives; International Aero Engines (IAE), 19904-19905 [E9-9965]
Download as PDF
19904
Federal Register / Vol. 74, No. 82 / Thursday, April 30, 2009 / Proposed Rules
(3) Reporting Requirements: For any
reporting requirement in this AD, under the
provisions of the Paperwork Reduction Act,
the Office of Management and Budget (OMB)
has approved the information collection
requirements and has assigned OMB Control
Number 2120–0056.
Related Information
(h) Refer to MCAI Transport Canada Civil
Aviation Airworthiness Directive CF–2008–
34, dated December 2, 2008; and Bombardier
Service Bulletin 670BA–49–012, Revision A,
dated August 28, 2008; for related
information.
Issued in Renton, Washington, on April 22,
2009.
Stephen P. Boyd,
Acting Manager, Transport Airplane
Directorate, Aircraft Certification Service.
[FR Doc. E9–9866 Filed 4–29–09; 8:45 am]
BILLING CODE 4910–13–P
New Jersey Avenue, SE., West Building
Ground Floor, Room W12–140,
Washington, DC 20590–0001.
• Hand Delivery: Deliver to Mail
address above between 9 a.m. and 5
p.m., Monday through Friday, except
Federal holidays.
• Fax: (202) 493–2251.
Contact International Aero Engines,
400 Main St., East Hartford, CT 06108;
telephone (860) 565–5515, fax (860)
565–0600 for a copy of the service
information identified in this AD.
FOR FURTHER INFORMATION CONTACT:
Kevin Dickert, Aerospace Engineer,
Engine Certification Office, FAA, Engine
& Propeller Directorate, 12 New England
Executive Park, Burlington, MA 01803;
e-mail: kevin_dickert@faa.gov;
telephone (781) 238–7117; fax (781)
238–7199.
SUPPLEMENTARY INFORMATION:
DEPARTMENT OF TRANSPORTATION
Comments Invited
Federal Aviation Administration
We invite you to send us any written
relevant data, views, or arguments
regarding this proposal. Send your
comments to an address listed under
ADDRESSES. Include ‘‘Docket No. FAA–
2007–29060; Directorate Identifier
2007–NE–34–AD’’ in the subject line of
your comments. We specifically invite
comments on the overall regulatory,
economic, environmental, and energy
aspects of the proposed AD. We will
consider all comments received by the
closing date and may amend the
proposed AD in light of those
comments.
We will post all comments we
receive, without change, to https://
www.regulations.gov, including any
personal information you provide. We
will also post a report summarizing each
substantive verbal contact with FAA
personnel concerning this proposed AD.
Using the search function of the Web
site, anyone can find and read the
comments in any of our dockets,
including, if provided, the name of the
individual who sent the comment (or
signed the comment on behalf of an
association, business, labor union, etc.).
You may review the DOT’s complete
Privacy Act Statement in the Federal
Register published on April 11, 2000
(65 FR 19477–78).
14 CFR Part 39
[Docket No. FAA–2007–29060; Directorate
Identifier 2007–NE–34–AD]
RIN 2120–AA64
Airworthiness Directives; International
Aero Engines (IAE)
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking
(NPRM).
AGENCY:
SUMMARY: The FAA proposes to adopt a
new airworthiness directive (AD) for
IAE V2500–A1, V2527E–A5, V2527M–
A5, V2528–D5, V2530–A5, and V2533–
A5 turbofan engines. This proposed AD
would require a onetime inspection of
certain vortex reducers for cracks, and
replacing the reducer and high-pressure
(HP) compressor stage 3–8 drum if the
reducer is cracked. This proposed AD
results from reports of fractured vortex
reducers found at shop visits. We are
proposing this AD to inspect for cracks
in the vortex reducer. Cracks in the
vortex reducer could cause an
uncontained failure of the HP
compressor stage 3–8 drum, which
could result in damage to the airplane.
DATES: We must receive any comments
on this proposed AD by June 29, 2009.
ADDRESSES: Use one of the following
addresses to comment on this proposed
AD.
• Federal eRulemaking Portal: Go to
https://www.regulations.gov and follow
the instructions for sending your
comments electronically.
• Mail: Docket Management Facility,
U.S. Department of Transportation, 1200
VerDate Nov<24>2008
15:01 Apr 29, 2009
Jkt 217001
street address for the Docket Operations
office (telephone (800) 647–5527) is the
same as the Mail address provided in
the ADDRESSES section. Comments will
be available in the AD docket shortly
after receipt.
Discussion
International Aero Engines has
informed us that they received reports
of two fractured vortex reducers found
at engine shop visits. Those findings
prompted IAE to perform stress analyses
and lifing work on both the vortex
reducer and the HP compressor stage 3–
8 drum. That work showed that a
cracked vortex reducer leads to an
increase in stress levels at the bolt holes
of the HP compressor stage 3–8 drum.
For certain stage 3–8 drums, the stress
increase at the stage 8 bolt holes could
lead to a reduced drum life depending
on the drum life when the vortex
reducer was cracked and the thrust
rating of the engine. Stage 3–8 drums,
part numbers (P/Ns) 6A5467, 6A6473,
and 6A7401, could fail from the
increased loading caused by a cracked
vortex reducer. This condition, if not
corrected, could cause an uncontained
failure of the HP compressor stage 3–8
drum, which could result in damage to
the airplane.
Relevant Service Information
We have reviewed and approved the
technical contents of IAE Service
Bulletin (SB) V2500–ENG–72–0510,
Revision 1, dated October 8, 2007, that
describes procedures for inspecting the
vortex reducer for cracks.
FAA’s Determination and Requirements
of the Proposed AD
We have evaluated all pertinent
information and identified an unsafe
condition that is likely to exist or
develop on other products of this same
type design. We are proposing this AD,
which would require a onetime
fluorescent penetrant inspection of
certain vortex reducers for cracks.
Examining the AD Docket
Costs of Compliance
We estimate that this proposed AD
would affect no engines installed on
airplanes of U.S. registry. Based on this,
we estimate there is no cost to U.S.
operators for the proposed AD.
You may examine the AD docket on
the Internet at https://
www.regulations.gov; or in person at the
Docket Operations office between 9 a.m.
and 5 p.m., Monday through Friday,
except Federal holidays. The AD docket
contains this proposed AD, the
regulatory evaluation, any comments
received, and other information. The
Authority for This Rulemaking
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
Section 106, describes the authority of
the FAA Administrator. Subtitle VII,
Aviation Programs, describes in more
detail the scope of the Agency’s
authority.
PO 00000
Frm 00003
Fmt 4702
Sfmt 4702
E:\FR\FM\30APP1.SGM
30APP1
Federal Register / Vol. 74, No. 82 / Thursday, April 30, 2009 / Proposed Rules
We are issuing this rulemaking under
the authority described in Subtitle VII,
Part A, Subpart III, Section 44701,
‘‘General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
Regulatory Findings
We have determined that this
proposed AD would not have federalism
implications under Executive Order
13132. This proposed AD would not
have a substantial direct effect on the
States, on the relationship between the
national Government and the States, or
on the distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed above, I
certify that the proposed AD:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under the
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979); and
3. Would not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared a regulatory evaluation
of the estimated costs to comply with
this proposed AD. You may get a copy
of this summary at the address listed
under ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Safety.
The Proposed Amendment
Under the authority delegated to me
by the Administrator, the Federal
Aviation Administration proposes to
amend 14 CFR part 39 as follows:
1. The authority citation for part 39
continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
International Aero Engines: Docket No.
FAA–2007–29060; Directorate Identifier
2007–NE–34–AD.
15:01 Apr 29, 2009
Affected ADs
Jkt 217001
Issued in Burlington, Massachusetts, on
April 27, 2009.
Peter A. White,
Assistant Manager, Engine and Propeller
Directorate, Aircraft Certification Service.
[FR Doc. E9–9965 Filed 4–29–09; 8:45 am]
BILLING CODE 4910–13–P
(b) None.
Applicability
(c) This AD applies to International Aero
Engines (IAE) V2500–A1, V2527E–A5,
V2527M–A5, V2528–D5, V2530–A5, and
V2533–A5 turbofan engines with high
pressure (HP) compressor stage 3–8 drums,
part numbers (P/Ns) 6A5467, 6A6473, and
6A7401, installed. These engines are
installed on, but not limited to, Airbus A319,
A320, and A321 series airplanes and Boeing
MD–90 airplanes.
Unsafe Condition
(d) This AD results from reports of
fractured vortex reducers found at shop
visits. We are issuing this AD to inspect for
cracks in the vortex reducer. Cracks in the
vortex reducer could cause an uncontained
failure of the HP compressor stage 3–8 drum,
which could result in damage to the airplane.
Compliance
(e) You are responsible for having the
actions required by this AD performed within
the compliance times specified unless the
actions have already been done.
Onetime Fluorescent Penetrant Inspection
(f) Fluorescent penetrant inspect the vortex
reducer for cracks when the HPC stage 3–8
drum has between 3,000 and 13,500 cycles
since new (CSN) if all of the following
conditions also apply:
(1) The HPC stage 3–8 drum has ever
operated in an engine at the V2527E–A5,
V2527M–A5, V2528–D5, V2530–A5 thrust
ratings,
(2) The vortex reducer had cycles
accumulated on it when mated with the HPC
stage 3–8 drum, and
(3) The HPC stage 3–8 drum had fewer
than 3,000 CSN when mated to the vortex
reducer.
(g) If the vortex reducer is cracked, remove
both the vortex reducer and the HPC stage 3–
8 drum from service.
(h) After the effective date of this AD, do
not return to service any HPC stage 3–8 drum
that was removed as specified in paragraph
(g) of this AD.
(i) The Manager, Engine Certification
Office, has the authority to approve
alternative methods of compliance for this
AD if requested using the procedures found
in 14 CFR 39.19.
Related Information
[Amended]
2. The FAA amends § 39.13 by adding
the following new airworthiness
directive:
VerDate Nov<24>2008
(a) The Federal Aviation Administration
(FAA) must receive comments on this
airworthiness directive (AD) action by June
29, 2009.
Alternative Methods of Compliance
PART 39—AIRWORTHINESS
DIRECTIVES
§ 39.13
Comments Due Date
19905
(j) Contact Kevin Dickert, Aerospace
Engineer, Engine Certification Office, FAA,
Engine & Propeller Directorate, 12 New
England Executive Park, Burlington, MA
01803; e-mail: kevin_dickert@faa.gov;
telephone (781) 238–7117; fax (781) 238–
7199, for more information about this AD.
PO 00000
Frm 00004
Fmt 4702
Sfmt 4702
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2009–0398; Directorate
Identifier 2008–NM–193–AD]
RIN 2120–AA64
Airworthiness Directives; BAE
Systems (Operations) Limited Model
BAe 146 and Avro 146–RJ Airplanes
AGENCY: Federal Aviation
Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking
(NPRM).
SUMMARY: We propose to adopt a new
airworthiness directive (AD) for the
products listed above. This proposed
AD results from mandatory continuing
airworthiness information (MCAI)
originated by an aviation authority of
another country to identify and correct
an unsafe condition on an aviation
product. The MCAI describes the unsafe
condition as:
There have been a number of incidents
where wing-to-fuselage or MLG [main
landing gear] door fairing panels have
detached from the aircraft during flight.
Subsequent inspection revealed the loss of
the fairing panels to be due to failure of
certain steel grommets * * *. A detaching
panel could strike the aircraft during flight,
causing damage. In addition, a detaching
panel could become attached to the structure
or control surfaces, resulting in reduced
control of the aircraft.
The proposed AD would require
actions that are intended to address the
unsafe condition described in the MCAI.
DATES: We must receive comments on
this proposed AD by June 1, 2009.
ADDRESSES: You may send comments by
any of the following methods:
• Federal eRulemaking Portal: Go to
https://www.regulations.gov. Follow the
instructions for submitting comments.
• Fax: (202) 493–2251.
• Mail: U.S. Department of
Transportation, Docket Operations, M–
30, West Building Ground Floor, Room
W12–140, 1200 New Jersey Avenue, SE.,
Washington, DC 20590.
• Hand Delivery: U.S. Department of
Transportation, Docket Operations, M–
30, West Building Ground Floor, Room
W12–40, 1200 New Jersey Avenue, SE.,
E:\FR\FM\30APP1.SGM
30APP1
Agencies
[Federal Register Volume 74, Number 82 (Thursday, April 30, 2009)]
[Proposed Rules]
[Pages 19904-19905]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-9965]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2007-29060; Directorate Identifier 2007-NE-34-AD]
RIN 2120-AA64
Airworthiness Directives; International Aero Engines (IAE)
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD)
for IAE V2500-A1, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, and V2533-
A5 turbofan engines. This proposed AD would require a onetime
inspection of certain vortex reducers for cracks, and replacing the
reducer and high-pressure (HP) compressor stage 3-8 drum if the reducer
is cracked. This proposed AD results from reports of fractured vortex
reducers found at shop visits. We are proposing this AD to inspect for
cracks in the vortex reducer. Cracks in the vortex reducer could cause
an uncontained failure of the HP compressor stage 3-8 drum, which could
result in damage to the airplane.
DATES: We must receive any comments on this proposed AD by June 29,
2009.
ADDRESSES: Use one of the following addresses to comment on this
proposed AD.
Federal eRulemaking Portal: Go to https://www.regulations.gov and follow the instructions for sending your
comments electronically.
Mail: Docket Management Facility, U.S. Department of
Transportation, 1200 New Jersey Avenue, SE., West Building Ground
Floor, Room W12-140, Washington, DC 20590-0001.
Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Fax: (202) 493-2251.
Contact International Aero Engines, 400 Main St., East Hartford, CT
06108; telephone (860) 565-5515, fax (860) 565-0600 for a copy of the
service information identified in this AD.
FOR FURTHER INFORMATION CONTACT: Kevin Dickert, Aerospace Engineer,
Engine Certification Office, FAA, Engine & Propeller Directorate, 12
New England Executive Park, Burlington, MA 01803; e-mail: kevin_dickert@faa.gov; telephone (781) 238-7117; fax (781) 238-7199.
SUPPLEMENTARY INFORMATION:
Comments Invited
We invite you to send us any written relevant data, views, or
arguments regarding this proposal. Send your comments to an address
listed under ADDRESSES. Include ``Docket No. FAA-2007-29060;
Directorate Identifier 2007-NE-34-AD'' in the subject line of your
comments. We specifically invite comments on the overall regulatory,
economic, environmental, and energy aspects of the proposed AD. We will
consider all comments received by the closing date and may amend the
proposed AD in light of those comments.
We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We
will also post a report summarizing each substantive verbal contact
with FAA personnel concerning this proposed AD. Using the search
function of the Web site, anyone can find and read the comments in any
of our dockets, including, if provided, the name of the individual who
sent the comment (or signed the comment on behalf of an association,
business, labor union, etc.). You may review the DOT's complete Privacy
Act Statement in the Federal Register published on April 11, 2000 (65
FR 19477-78).
Examining the AD Docket
You may examine the AD docket on the Internet at https://www.regulations.gov; or in person at the Docket Operations office
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this proposed AD, the regulatory
evaluation, any comments received, and other information. The street
address for the Docket Operations office (telephone (800) 647-5527) is
the same as the Mail address provided in the ADDRESSES section.
Comments will be available in the AD docket shortly after receipt.
Discussion
International Aero Engines has informed us that they received
reports of two fractured vortex reducers found at engine shop visits.
Those findings prompted IAE to perform stress analyses and lifing work
on both the vortex reducer and the HP compressor stage 3-8 drum. That
work showed that a cracked vortex reducer leads to an increase in
stress levels at the bolt holes of the HP compressor stage 3-8 drum.
For certain stage 3-8 drums, the stress increase at the stage 8 bolt
holes could lead to a reduced drum life depending on the drum life when
the vortex reducer was cracked and the thrust rating of the engine.
Stage 3-8 drums, part numbers (P/Ns) 6A5467, 6A6473, and 6A7401, could
fail from the increased loading caused by a cracked vortex reducer.
This condition, if not corrected, could cause an uncontained failure of
the HP compressor stage 3-8 drum, which could result in damage to the
airplane.
Relevant Service Information
We have reviewed and approved the technical contents of IAE Service
Bulletin (SB) V2500-ENG-72-0510, Revision 1, dated October 8, 2007,
that describes procedures for inspecting the vortex reducer for cracks.
FAA's Determination and Requirements of the Proposed AD
We have evaluated all pertinent information and identified an
unsafe condition that is likely to exist or develop on other products
of this same type design. We are proposing this AD, which would require
a onetime fluorescent penetrant inspection of certain vortex reducers
for cracks.
Costs of Compliance
We estimate that this proposed AD would affect no engines installed
on airplanes of U.S. registry. Based on this, we estimate there is no
cost to U.S. operators for the proposed AD.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, Section 106, describes the
authority of the FAA Administrator. Subtitle VII, Aviation Programs,
describes in more detail the scope of the Agency's authority.
[[Page 19905]]
We are issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701, ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We have determined that this proposed AD would not have federalism
implications under Executive Order 13132. This proposed AD would not
have a substantial direct effect on the States, on the relationship
between the national Government and the States, or on the distribution
of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that the proposed AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979); and
3. Would not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to
comply with this proposed AD. You may get a copy of this summary at the
address listed under ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Safety.
The Proposed Amendment
Under the authority delegated to me by the Administrator, the
Federal Aviation Administration proposes to amend 14 CFR part 39 as
follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. The FAA amends Sec. 39.13 by adding the following new
airworthiness directive:
International Aero Engines: Docket No. FAA-2007-29060; Directorate
Identifier 2007-NE-34-AD.
Comments Due Date
(a) The Federal Aviation Administration (FAA) must receive
comments on this airworthiness directive (AD) action by June 29,
2009.
Affected ADs
(b) None.
Applicability
(c) This AD applies to International Aero Engines (IAE) V2500-
A1, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, and V2533-A5 turbofan
engines with high pressure (HP) compressor stage 3-8 drums, part
numbers (P/Ns) 6A5467, 6A6473, and 6A7401, installed. These engines
are installed on, but not limited to, Airbus A319, A320, and A321
series airplanes and Boeing MD-90 airplanes.
Unsafe Condition
(d) This AD results from reports of fractured vortex reducers
found at shop visits. We are issuing this AD to inspect for cracks
in the vortex reducer. Cracks in the vortex reducer could cause an
uncontained failure of the HP compressor stage 3-8 drum, which could
result in damage to the airplane.
Compliance
(e) You are responsible for having the actions required by this
AD performed within the compliance times specified unless the
actions have already been done.
Onetime Fluorescent Penetrant Inspection
(f) Fluorescent penetrant inspect the vortex reducer for cracks
when the HPC stage 3-8 drum has between 3,000 and 13,500 cycles
since new (CSN) if all of the following conditions also apply:
(1) The HPC stage 3-8 drum has ever operated in an engine at the
V2527E-A5, V2527M-A5, V2528-D5, V2530-A5 thrust ratings,
(2) The vortex reducer had cycles accumulated on it when mated
with the HPC stage 3-8 drum, and
(3) The HPC stage 3-8 drum had fewer than 3,000 CSN when mated
to the vortex reducer.
(g) If the vortex reducer is cracked, remove both the vortex
reducer and the HPC stage 3-8 drum from service.
(h) After the effective date of this AD, do not return to
service any HPC stage 3-8 drum that was removed as specified in
paragraph (g) of this AD.
Alternative Methods of Compliance
(i) The Manager, Engine Certification Office, has the authority
to approve alternative methods of compliance for this AD if
requested using the procedures found in 14 CFR 39.19.
Related Information
(j) Contact Kevin Dickert, Aerospace Engineer, Engine
Certification Office, FAA, Engine & Propeller Directorate, 12 New
England Executive Park, Burlington, MA 01803; e-mail: kevin_dickert@faa.gov; telephone (781) 238-7117; fax (781) 238-7199, for
more information about this AD.
Issued in Burlington, Massachusetts, on April 27, 2009.
Peter A. White,
Assistant Manager, Engine and Propeller Directorate, Aircraft
Certification Service.
[FR Doc. E9-9965 Filed 4-29-09; 8:45 am]
BILLING CODE 4910-13-P