Certain New Chemicals; Receipt and Status Information, 16857-16861 [E9-8362]
Download as PDF
<![CDATA[
16857
Federal Register / Vol. 74, No. 69 / Monday, April 13, 2009 / Notices
II. 2 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 2/17/09 TO 2/27/09
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
T–09–0004
02/17/09
04/02/09
Cytec Industries Inc.
(G) Industrial coating agent
T–09–0005
02/23/09
04/08/09
Cytec Industries Inc.
Chemical
(G) Industrial coatings agent
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
(G) Fatty acids, polymers with substituted alkanoate, polyethylene glycol mono-me ether, polyol and substituted carbomonocycle
(G) Substituted acrylates, polymer
with substituted polyglycol ether
prepolymer, substituted alkylnitrileinitiated
CBI) on the Notices of Commencement
to manufacture received:
III. 21 NOTICES OF COMMENCEMENT FROM: 2/17/09 TO 2/27/09
Case No.
Commencement
Notice End Date
Received Date
P–07–0414
P–08–0067
02/18/09
02/17/09
01/06/09
01/23/09
P–08–0178
P–08–0262
P–08–0305
P–08–0353
P–08–0548
P–08–0557
P–08–0559
P–08–0624
P–08–0688
P–08–0693
02/20/09
02/18/09
02/19/09
02/23/09
02/19/09
02/24/09
02/18/09
02/24/09
02/18/09
02/18/09
02/02/09
02/03/09
02/05/09
02/13/09
02/05/09
02/15/09
01/16/09
02/15/09
01/15/09
02/06/09
P–08–0699
P–08–0703
02/17/09
02/17/09
02/04/09
02/06/09
P–08–0739
02/17/09
01/16/09
P–08–0745
P–08–0746
P–09–0012
P–09–0019
P–09–0045
P–09–0046
02/24/09
02/24/09
02/23/09
02/24/09
02/23/09
02/19/09
01/30/09
01/31/09
02/10/09
01/29/09
02/09/09
02/05/09
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: March 23, 2009.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E9–8360 Filed 4–10–09; 8:45 am]
18:51 Apr 10, 2009
(G) Alkyl heteroalkyl chloride
(G)
1,1′′′-[1,4-phenylenebis(methylene)]bis[1′,3′-dihydro-8-methoxy-3′3,′-dimethyl-6-nitro- aromatic substituted indole
(G) Substituted benzoyl chloride
(G) Polyester polyurethane
(G) Compound of oxalkylated amine with fatty acid adduct
(S) Propanoic acid, 2,2-dimethyl-, 3-methyl-3-buten-1-yl ester
(G) Polyether modified polyurethane
(G) Acrylated aliphatic polyurethane
(G) Aliphatic ketoxime
(G) Acrylated aliphatic polyurethane
(G) Epoxy-amine adduct
(G) Substituted carbomonocycles, polymer with substituted glycols and
alkyldioic acid
(G) Alkoxysilane
(G) Dihydroxyalkanoic acid, polymer with polyetherdiol and alicyclic
diisocyanate
(G) Fatty acids, vegetable, polymers with aliphatic and cycloaliphatic
dicarboxylic acids, polyols, dihydroxycarboxylic acids, cycloaliphatic
diisocyanates, and tertiary alkyl amines.
(G) Silicone copolyol phthalate
(G) Silicone copolyol phthalate (zinc salts)
(S) Magnesium, chloroethenyl(G) Cycloaliphatic diglycidyl ester
(S) Propanol, 1(or 2)-(methyl-2-phenoxyethoxy)(S)
Cyclosiloxanes,
3-[2-hydroxy-3-[(2-methyl-1-oxo-2-propen-1yl)oxy]propoxy]propyl
me,
3-[3-hydroxy-2-[(2-methyl-1-oxo-2-propen-1yl)oxy]propoxy]propyl me, me 3-(2-oxiranylmethoxy)propyl
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2009–0147; FRL–8406–5]
Certain New Chemicals; Receipt and
Status Information
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
BILLING CODE 6560–50–S
VerDate Nov<24>2008
Chemical
Jkt 217001
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from January 26, 2009
through February 13, 2009, consists of
the PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
E:\FR\FM\13APN1.SGM
13APN1
16858
Federal Register / Vol. 74, No. 69 / Monday, April 13, 2009 / Notices
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before May 13,
2009.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2009–0147, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2009–0147.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2009–0147. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
VerDate Nov<24>2008
18:51 Apr 10, 2009
Jkt 217001
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
website to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone number
of the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
I. General Information
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
PO 00000
Frm 00029
Fmt 4703
Sfmt 4703
E:\FR\FM\13APN1.SGM
13APN1
16859
Federal Register / Vol. 74, No. 69 / Monday, April 13, 2009 / Notices
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from January 26, 2009
through February 13, 2009, consists of
the PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
and TME, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit I.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 44 PREMANUFACTURE NOTICES RECEIVED FROM: 01/26/09 TO 02/13/09
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
P–09–0178
01/26/09
04/25/09
CBI
(G) Polymer coating
P–09–0179
01/26/09
04/25/09
CBI
(G) Polymer coating
P–09–0180
01/26/09
04/25/09
DuPont Performance
Elastomers, LLC
(G) Polymer modifier / process aid
fluoroelastomer part
P–09–0181
01/26/09
04/25/09
CBI
(G) Intermediate polymer
P–09–0182
01/27/09
04/26/09
CBI
(G) Polymer for waterborne paint
P–09–0183
01/27/09
04/26/09
Cook Composites and
Polymers Co.
P–09–0184
01/26/09
04/25/09
CBI
P–09–0185
01/27/09
04/26/09
Cytec Industries Inc.
(S) Thermoset laminating resin for reinforced composite parts; thermoset
closed molding resin for reinforced
composite parts
(S) Resin for ultra violet or eletron
beam radiation curable coatings
and inks
(G) Coatings resin
P–09–0186
01/27/09
04/26/09
Cytec Industries Inc.
(G) coating resin
P–09–0187
01/29/09
04/28/09
Lubrizol
P–09–0188
01/29/09
04/28/09
CBI
P–09–0189
P–09–0190
01/29/09
01/30/09
04/28/09
04/29/09
Reichhold, Inc.
CBI
(S) Corrosion inhibitor in metalworking fluids
(G) Component of paints, coatings,
and industrial composites
(S) Pigment gringing vehicle
(G) Curative for epoxy containing adhesives
VerDate Nov<24>2008
18:51 Apr 10, 2009
Jkt 217001
PO 00000
Frm 00030
Fmt 4703
Sfmt 4703
E:\FR\FM\13APN1.SGM
Chemical
(G) Fatty acids, dimers, polymers with
alkane diol, dihydroxyfunctional
monocarboxylic
acid,
alkyl
isocyanate, alkanediol, aromatic anhydride,
glycol
ether
and
alkanetriol, compounds with amino
alcohol
(G) Fatty acids, dimers, polymers
dihydroxyfunctional monocarboxylic
acid, alkane diol, alkyl isocyanate,
alkanediol, aromatic anhydride, glycol ether and alkanetriol, compounds with amino alcohol
(G)
Modified
tetrafluoroethylenehexafluoropropene-vinylidene fluoride copolymer
(G) Dimer fatty acids, polymers with
alkane diol, alkyl glycol, carboxylic
acid anhydride, glycol ether and alcohol
(G) 2-propenoic acid, 2-methyl-, polymer with ethenylbenzene, ethyl 2propenoate, formaldehyde, 2-hydroxyethyl 2-propenoate, methyl 2methyl-2-propenoate
and
substituted monoheterocycle, tert-bu 2ethylhexaneperoxoate-initiated,
compounds
with
2(dimethylamino)ethanol]
(G) 2,5-furandione, polymer with
alkanediol,
3a,4,5,6,7,7ahexahydro-4,7-methano-1H-inden5(or 6)-yl ester
(G) Polyester polyurethane acrylate
oligomer
(G) Substituted carbomonocycles
polymer
with
substituted
hetermonocycle, alkane diol, substituted alkanoic acid, alkylene glycol compound with substituted
amine
(S) Phenol, polymer with formaldehyde, bu ether
(S) N,N′-methylenebismorpholine
(G) Carbon nanomaterial
(G) Polyester polymer
(S) Fatty acids, C18-unsaturated,
dimers,
di-me
esters,
hydrogenated,
bis[4(acetyloxy)benzoates]
13APN1
16860
Federal Register / Vol. 74, No. 69 / Monday, April 13, 2009 / Notices
I. 44 PREMANUFACTURE NOTICES RECEIVED FROM: 01/26/09 TO 02/13/09—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
P–09–0191
01/30/09
04/29/09
CBI
(G) Emulsifier
P–09–0192
01/30/09
04/29/09
Esstech, Inc.
(S) Adhesive
P–09–0193
02/03/09
05/03/09
CBI
(S) Intermediate for flame retardant
polyurethane manufacture
P–09–0194
02/03/09
05/03/09
CBI
(S) Binder for flame retardant textile
coatings
P–09–0195
02/03/09
05/03/09
CBI
(S) Intermediate for flame retardant
polyurethane manufacture
P–09–0196
P–09–0198
P–09–0199
P–09–0200
P–09–0201
P–09–0202
P–09–0203
02/03/09
02/04/09
02/04/09
02/05/09
02/05/09
02/05/09
02/06/09
05/03/09
05/04/09
05/04/09
05/05/09
05/05/09
05/05/09
05/06/09
CBI
CBI
CBI
DuPont Company
DuPont Company
CBI
CBI
(G)
(G)
(G)
(G)
(G)
(G)
(G)
P–09–0204
02/06/09
05/06/09
Wacker Chemical Corporation
(S) Additive for antifoam agents
P–09–0205
P–09–0206
02/06/09
02/06/09
05/06/09
05/06/09
CBI
CBI
P–09–0207
02/09/09
05/09/09
CBI
P–09–0208
02/10/09
05/10/09
CBI
P–09–0209
02/10/09
05/10/09
Cognis Corporation
(G) Inhibitor for oil field applications
(G) Raw material for reaction to form
a polymer.
(S) Site limited, isolated, chemical intermediate
(S) Curing agent for epoxy coating
systems
(G) Low foaming wetting agent
P–09–0210
02/11/09
05/11/09
CBI
(G) Pour point depressant
P–09–0211
P–09–0212
02/11/09
02/12/09
05/11/09
05/12/09
CBI
CBI
P–09–0213
P–09–0214
P–09–0215
P–09–0216
P–09–0217
02/11/09
02/11/09
02/11/09
02/12/09
02/12/09
05/11/09
05/11/09
05/11/09
05/12/09
05/12/09
CBI
CBI
CBI
Solvay Fluorides LLC
CBI
P–09–0218
02/12/09
05/12/09
CBI
P–09–0219
02/12/09
05/12/09
CBI
P–09–0220
02/12/09
05/12/09
CBI
P–09–0221
02/12/09
05/12/09
CBI
(G) Inhibitor for oilfield applications
(S) Intermediate for industry foam; intermediate for insulating foam
(G) Polymeric binder
(G) Polymeric binder
(G) Polymeric binder
(G) Specialty additive
(G) Functional component in industrial
fluid
(G) Functional component in industrial
fluid
(G) Functional component in industrial
fluid
(G) Functional component in industrial
fluid
(G) Functional component in industrial
fluid
In Table II of this unit, EPA provides
the following information (to the extent
VerDate Nov<24>2008
18:51 Apr 10, 2009
Jkt 217001
Adhesive
Additive for reinforcement
Additive for reinforcement
Polymer additive
Polymer additive
Lubricant additive
Fabrication of composite articles.
Chemical
(G) Polyoxyalkylene phenyl ether,
styrenated, sulfated, ammonium
salts
(S)
1,2,4,5-benzenetetracarboxylic
acid,
1,4-bis[2-[(2-methyl-1-oxopropen-1-yl)oxy]-1-[[(2-methyl-1oxo-2-propen-1-yl)oxy]methyl]ethyl]
ester
(S) Phosphonic acid, [2-[bis(2-hydroxyethyl)amino]ethyl]-,
bis(2chloroethyl) ester
(G) Polyurethane toluenediisocyante,
aklyl glycol adipate polyester,
brominated neopentylglycol and
chloroethyl phosphonic acid diols.
(S) Phosphonic acid, P-[2-[bis(2-hydroxyethyl)amino]ethyl]-,
2-bis(2chloroethoxy)phosphinyl]ethyl
2chloroethyl ester
(G) Acrylic isocyanate intermediate
(G) Carbon derivative
(G) Carbon derivative
(G) Alkanoic acid, potassium salt
(G) Alkanoic acid, sodium salt
(G) N-aklyl pyrrolidinedione derivative
(G) Unsaturated urethane methacrylate
(G) Siloxanes and silicones, di-me,
hydroxyalkyl me, alkoxylated, polymers
with
diisocyanatoalkane,
polyalkylene-glycol monoallyl etherblocked
(G) Quaternary ammonium compound
(G) Alkymethacrylate
(G) Alcohol ethoxylate
(G)
Mixture
on
N-methylated
polyalkylenepolyamine
(S) Poly(oxy-1,2-ethanediyl), .alpha.undecyl-.omega.-hydroxy-,
branched and linear, ethers with
1,2-decanediol (1:1)
(G)
Furandione
polymer
with
ethenylbenzene, alkyl ester
(G) Quaternary ammonium compound
(G) Polyol, polyester polyol
(G) Styrene-methacrylate copolymer
(G) Styrene-methacrylate copolymer
(G) Styrene-methacrylate copolymer
(S) 1,3-dioxolan-2-one, 4-fluoro(G) Fatty acid ester
(G) Fatty acid ester
(G) Fatty acid ester
(G) Fatty acid ester
(G) Fatty acid ester
that such information is not claimed as
CBI) on the TMEs received:
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
E:\FR\FM\13APN1.SGM
13APN1
16861
Federal Register / Vol. 74, No. 69 / Monday, April 13, 2009 / Notices
II. 2 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 01/26/09 TO 02/13/09
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
T–09–0002
01/27/09
03/12/09
Cytec Industries Inc.
(G) Coatings resin
T–09–0003
01/27/09
03/12/09
Cytec Industries Inc.
Chemical
(G) Coatings resin
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
(G) Substituted carbomonocycles
polymer
with
substituted
hetermonocycle, alkane diol, substituted alkanoic acid, alkylene glycol compound with substituted
amine
(S) Phenol, polymer with formaldehyde, bu ether
CBI) on the Notices of Commencement
to manufacture received:
III. 14 NOTICES OF COMMENCEMENT FROM: 01/26/09 TO 02/13/09
Case No.
Commencement
Notice End Date
Received Date
P–00–0849
P–06–0324
P–06–0379
P–06–0725
P–07–0445
P–08–0472
P–08–0554
P–08–0681
P–08–0689
P–08–0701
P–08–0736
02/04/09
02/03/09
01/27/09
02/09/09
02/03/09
01/29/09
02/12/09
02/03/09
01/26/09
02/04/09
01/28/09
11/21/08
01/07/09
01/06/09
01/25/09
01/14/09
12/29/08
02/04/09
01/30/09
12/17/08
01/20/09
01/06/09
P–08–0741
P–08–0750
P–08–0756
01/30/09
02/04/09
02/03/09
01/07/09
01/21/09
01/30/09
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: March 6, 2009.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E9–8362 Filed 4–10–09; 8:45 am]
BILLING CODE 6560–50–S
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2009–0106; FRL–8406–4]
Certain New Chemicals; Receipt and
Status Information
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
VerDate Nov<24>2008
18:51 Apr 10, 2009
Jkt 217001
Chemical
(S) Morpholine, 4-(1,1-dimethylethyl)(G) Polyphosphoric acids compounds with pyrolyzed melamine
(G) Alkyl substituted carbotricycle acid anhydride
(G) Propyl heptanol distillation residues
(G) Fluoroalkyl methacrylate copolymer
(S) Morpholine, 4-[(triethoxysilyl)methyl]-*
(G) Aqueous polyurethane dispersion
(G) Polyester resin
(G) Substituted aliphatic amine
(G) Benzoic acid, 4-chloro-2-[(substituted)azo]-, strontium salt (1:1)
(G) Alkanedioic acid, polymer with alkyl diisocyanate, substituted alkyldiol, substituted alkanoic acid, copolymer, substituted oxepanone homopolymerblocked
(G) Cyclohexanedialdehyde tetra phenol
(G) Aqueous polyurethane resin dispersion
(G) Polyester resin
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from December 22,
2008 through January 23, 2009, consists
of the PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before May 13,
2009.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
number EPA–HQ–OPPT–2009–0106, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2009–0106.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2009–0106. EPA’s policy is that all
comments received will be included in
E:\FR\FM\13APN1.SGM
13APN1
]]>Agencies
[Federal Register Volume 74, Number 69 (Monday, April 13, 2009)]
[Notices]
[Pages 16857-16861]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-8362]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2009-0147; FRL-8406-5]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from January 26, 2009 through February 13, 2009, consists of the
PMNs and TME, both pending or expired, and the notices of commencement
to manufacture a new
[[Page 16858]]
chemical that the Agency has received under TSCA section 5 during this
time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before May 13, 2009.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2009-0147, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2009-0147. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2009-0147. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
https://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at https://www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions
[[Page 16859]]
pertaining to the manufacture of new chemicals. Under sections 5(d)(2)
and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of
a PMN or an application for a TME and to publish periodic status
reports on the chemicals under review and the receipt of notices of
commencement to manufacture those chemicals. This status report, which
covers the period from January 26, 2009 through February 13, 2009,
consists of the PMNs and TME, both pending or expired, and the notices
of commencement to manufacture a new chemical that the Agency has
received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TME, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit I. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 44 Premanufacture Notices Received From: 01/26/09 to 02/13/09
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-09-0178 01/26/09 04/25/09 CBI (G) Polymer coating (G) Fatty acids,
dimers, polymers
with alkane diol,
dihydroxyfunctional
monocarboxylic acid,
alkyl isocyanate,
alkanediol, aromatic
anhydride, glycol
ether and
alkanetriol,
compounds with amino
alcohol
P-09-0179 01/26/09 04/25/09 CBI (G) Polymer coating (G) Fatty acids,
dimers, polymers
dihydroxyfunctional
monocarboxylic acid,
alkane diol, alkyl
isocyanate,
alkanediol, aromatic
anhydride, glycol
ether and
alkanetriol,
compounds with amino
alcohol
P-09-0180 01/26/09 04/25/09 DuPont Performance (G) Polymer modifier / (G) Modified
Elastomers, LLC process aid tetrafluoroethylene-
fluoroelastomer part hexafluoropropene-
vinylidene fluoride
copolymer
P-09-0181 01/26/09 04/25/09 CBI (G) Intermediate (G) Dimer fatty
polymer acids, polymers with
alkane diol, alkyl
glycol, carboxylic
acid anhydride,
glycol ether and
alcohol
P-09-0182 01/27/09 04/26/09 CBI (G) Polymer for (G) 2-propenoic acid,
waterborne paint 2-methyl-, polymer
with ethenylbenzene,
ethyl 2-propenoate,
formaldehyde, 2-
hydroxyethyl 2-
propenoate, methyl 2-
methyl-2-propenoate
and substituted
monoheterocycle,
tert-bu 2-
ethylhexaneperoxoate-
initiated, compounds
with 2-
(dimethylamino)ethan
ol]
P-09-0183 01/27/09 04/26/09 Cook Composites and (S) Thermoset (G) 2,5-furandione,
Polymers Co. laminating resin for polymer with
reinforced composite alkanediol,
parts; thermoset 3a,4,5,6,7,7a-
closed molding resin hexahydro-4,7-
for reinforced methano-1H-inden-
composite parts 5(or 6)-yl ester
P-09-0184 01/26/09 04/25/09 CBI (S) Resin for ultra (G) Polyester
violet or eletron polyurethane
beam radiation acrylate oligomer
curable coatings and
inks
P-09-0185 01/27/09 04/26/09 Cytec Industries Inc. (G) Coatings resin (G) Substituted
carbomonocycles
polymer with
substituted
hetermonocycle,
alkane diol,
substituted alkanoic
acid, alkylene
glycol compound with
substituted amine
P-09-0186 01/27/09 04/26/09 Cytec Industries Inc. (G) coating resin (S) Phenol, polymer
with formaldehyde,
bu ether
P-09-0187 01/29/09 04/28/09 Lubrizol (S) Corrosion (S) N,N'-
inhibitor in methylenebismorpholi
metalworking fluids ne
P-09-0188 01/29/09 04/28/09 CBI (G) Component of (G) Carbon
paints, coatings, nanomaterial
and industrial
composites
P-09-0189 01/29/09 04/28/09 Reichhold, Inc. (S) Pigment gringing (G) Polyester polymer
vehicle
P-09-0190 01/30/09 04/29/09 CBI (G) Curative for (S) Fatty acids, C18-
epoxy containing unsaturated, dimers,
adhesives di-me esters,
hydrogenated, bis[4-
(acetyloxy)benzoates
]
[[Page 16860]]
P-09-0191 01/30/09 04/29/09 CBI (G) Emulsifier (G) Polyoxyalkylene
phenyl ether,
styrenated,
sulfated, ammonium
salts
P-09-0192 01/30/09 04/29/09 Esstech, Inc. (S) Adhesive (S) 1,2,4,5-
benzenetetracarboxyl
ic acid, 1,4-bis[2-
[(2-methyl-1-oxo-
propen-1-yl)oxy]-1-
[[(2-methyl-1-oxo-2-
propen-1-
yl)oxy]methyl]ethyl]
ester
P-09-0193 02/03/09 05/03/09 CBI (S) Intermediate for (S) Phosphonic acid,
flame retardant [2-[bis(2-
polyurethane hydroxyethyl)amino]e
manufacture thyl]-, bis(2-
chloroethyl) ester
P-09-0194 02/03/09 05/03/09 CBI (S) Binder for flame (G) Polyurethane
retardant textile toluenediisocyante,
coatings aklyl glycol adipate
polyester,
brominated
neopentylglycol and
chloroethyl
phosphonic acid
diols.
P-09-0195 02/03/09 05/03/09 CBI (S) Intermediate for (S) Phosphonic acid,
flame retardant P-[2-[bis(2-
polyurethane hydroxyethyl)amino]e
manufacture thyl]-, 2-bis(2-
chloroethoxy)phosphi
nyl]ethyl 2-
chloroethyl ester
P-09-0196 02/03/09 05/03/09 CBI (G) Adhesive (G) Acrylic
isocyanate
intermediate
P-09-0198 02/04/09 05/04/09 CBI (G) Additive for (G) Carbon derivative
reinforcement
P-09-0199 02/04/09 05/04/09 CBI (G) Additive for (G) Carbon derivative
reinforcement
P-09-0200 02/05/09 05/05/09 DuPont Company (G) Polymer additive (G) Alkanoic acid,
potassium salt
P-09-0201 02/05/09 05/05/09 DuPont Company (G) Polymer additive (G) Alkanoic acid,
sodium salt
P-09-0202 02/05/09 05/05/09 CBI (G) Lubricant (G) N-aklyl
additive pyrrolidinedione
derivative
P-09-0203 02/06/09 05/06/09 CBI (G) Fabrication of (G) Unsaturated
composite articles. urethane
methacrylate
P-09-0204 02/06/09 05/06/09 Wacker Chemical (S) Additive for (G) Siloxanes and
Corporation antifoam agents silicones, di-me,
hydroxyalkyl me,
alkoxylated,
polymers with
diisocyanatoalkane,
polyalkylene-glycol
monoallyl ether-
blocked
P-09-0205 02/06/09 05/06/09 CBI (G) Inhibitor for oil (G) Quaternary
field applications ammonium compound
P-09-0206 02/06/09 05/06/09 CBI (G) Raw material for (G) Alkymethacrylate
reaction to form a
polymer.
P-09-0207 02/09/09 05/09/09 CBI (S) Site limited, (G) Alcohol
isolated, chemical ethoxylate
intermediate
P-09-0208 02/10/09 05/10/09 CBI (S) Curing agent for (G) Mixture on N-
epoxy coating methylated
systems polyalkylenepolyamin
e
P-09-0209 02/10/09 05/10/09 Cognis Corporation (G) Low foaming (S) Poly(oxy-1,2-
wetting agent ethanediyl), .alpha.-
undecyl-.omega.-
hydroxy-, branched
and linear, ethers
with 1,2-decanediol
(1:1)
P-09-0210 02/11/09 05/11/09 CBI (G) Pour point (G) Furandione
depressant polymer with
ethenylbenzene,
alkyl ester
P-09-0211 02/11/09 05/11/09 CBI (G) Inhibitor for (G) Quaternary
oilfield ammonium compound
applications
P-09-0212 02/12/09 05/12/09 CBI (S) Intermediate for (G) Polyol, polyester
industry foam; polyol
intermediate for
insulating foam
P-09-0213 02/11/09 05/11/09 CBI (G) Polymeric binder (G) Styrene-
methacrylate
copolymer
P-09-0214 02/11/09 05/11/09 CBI (G) Polymeric binder (G) Styrene-
methacrylate
copolymer
P-09-0215 02/11/09 05/11/09 CBI (G) Polymeric binder (G) Styrene-
methacrylate
copolymer
P-09-0216 02/12/09 05/12/09 Solvay Fluorides LLC (G) Specialty (S) 1,3-dioxolan-2-
additive one, 4-fluoro-
P-09-0217 02/12/09 05/12/09 CBI (G) Functional (G) Fatty acid ester
component in
industrial fluid
P-09-0218 02/12/09 05/12/09 CBI (G) Functional (G) Fatty acid ester
component in
industrial fluid
P-09-0219 02/12/09 05/12/09 CBI (G) Functional (G) Fatty acid ester
component in
industrial fluid
P-09-0220 02/12/09 05/12/09 CBI (G) Functional (G) Fatty acid ester
component in
industrial fluid
P-09-0221 02/12/09 05/12/09 CBI (G) Functional (G) Fatty acid ester
component in
industrial fluid
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
[[Page 16861]]
II. 2 Test Marketing Exemption Notices Received From: 01/26/09 to 02/13/09
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-09-0002 01/27/09 03/12/09 Cytec Industries Inc. (G) Coatings resin (G) Substituted
carbomonocycles
polymer with
substituted
hetermonocycle,
alkane diol,
substituted alkanoic
acid, alkylene
glycol compound with
substituted amine
T-09-0003 01/27/09 03/12/09 Cytec Industries Inc. (G) Coatings resin (S) Phenol, polymer
with formaldehyde,
bu ether
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 14 Notices of Commencement From: 01/26/09 to 02/13/09
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0849 02/04/09 11/21/08 (S) Morpholine, 4-(1,1-
dimethylethyl)-
P-06-0324 02/03/09 01/07/09 (G) Polyphosphoric acids
compounds with pyrolyzed
melamine
P-06-0379 01/27/09 01/06/09 (G) Alkyl substituted
carbotricycle acid
anhydride
P-06-0725 02/09/09 01/25/09 (G) Propyl heptanol
distillation residues
P-07-0445 02/03/09 01/14/09 (G) Fluoroalkyl
methacrylate copolymer
P-08-0472 01/29/09 12/29/08 (S) Morpholine, 4-
[(triethoxysilyl)methyl]-
*
P-08-0554 02/12/09 02/04/09 (G) Aqueous polyurethane
dispersion
P-08-0681 02/03/09 01/30/09 (G) Polyester resin
P-08-0689 01/26/09 12/17/08 (G) Substituted aliphatic
amine
P-08-0701 02/04/09 01/20/09 (G) Benzoic acid, 4-chloro-
2-[(substituted)azo]-,
strontium salt (1:1)
P-08-0736 01/28/09 01/06/09 (G) Alkanedioic acid,
polymer with alkyl
diisocyanate, substituted
alkyldiol, substituted
alkanoic acid, copolymer,
substituted oxepanone
homopolymer-blocked
P-08-0741 01/30/09 01/07/09 (G) Cyclohexanedialdehyde
tetra phenol
P-08-0750 02/04/09 01/21/09 (G) Aqueous polyurethane
resin dispersion
P-08-0756 02/03/09 01/30/09 (G) Polyester resin
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: March 6, 2009.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E9-8362 Filed 4-10-09; 8:45 am]
BILLING CODE 6560-50-S
