National Volatile Organic Compound Emission Standards for Aerosol Coatings, 14941-14950 [E9-7300]
Download as PDF
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
Coordination with Indian Tribal
Governments, because it would not have
a substantial direct effect on one or
more Indian tribes, on the relationship
between the Federal Government and
Indian tribes, or on the distribution of
power and responsibilities between the
Federal Government and Indian tribes.
Energy Effects
We have analyzed this proposed rule
under Executive Order 13211, Actions
Concerning Regulations That
Significantly Affect Energy Supply,
Distribution, or Use. We have
determined that it is not a ‘‘significant
energy action’’ under that order because
it is not a ‘‘significant regulatory action’’
under Executive Order 12866 and is not
likely to have a significant adverse effect
on the supply, distribution, or use of
energy. The Administrator of the Office
of Information and Regulatory Affairs
has not designated it as a significant
energy action. Therefore, it does not
require a Statement of Energy Effects
under Executive Order 13211.
dwashington3 on PROD1PC60 with PROPOSALS
Technical Standards
The National Technology Transfer
and Advancement Act (NTTAA) (15
U.S.C. 272 note) directs agencies to use
voluntary consensus standards in their
regulatory activities unless the agency
provides Congress, through the Office of
Management and Budget, with an
explanation of why using these
standards would be inconsistent with
applicable law or otherwise impractical.
Voluntary consensus standards are
technical standards (e.g., specifications
of materials, performance, design, or
operation; test methods; sampling
procedures; and related management
systems practices) that are developed or
adopted by voluntary consensus
standards bodies.
This proposed rule does not use
technical standards. Therefore, we did
not consider the use of voluntary
consensus standards.
Environment
We have analyzed this proposed rule
under Department of Homeland
Security Management Directive 0023.1
and Commandant Instruction
M16475.lD, which guide the Coast
Guard in complying with the National
Environmental Policy Act of 1969
(NEPA) (42 U.S.C. 4321–4370f), and
have made a preliminary determination
that this action is one of a category of
actions which does not individually or
cumulatively have a significant effect on
the human environment. A preliminary
environmental analysis checklist
supporting this determination is
available in the docket where indicated
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
under ADDRESSES. This proposed rule
involves changes to the size of a special
anchorage area. We seek any comments
or information that may lead to the
discovery of a significant environmental
impact from this proposed rule.
14941
Dated: February 27, 2009.
Dale G. Gabel,
Rear Admiral, U.S. Coast Guard, Commander,
First Coast Guard District.
[FR Doc. E9–7357 Filed 4–1–09; 8:45 am]
BILLING CODE 4910–15–P
List of Subjects in 33 CFR Part 110
Anchorage grounds.
For the reasons discussed in the
preamble, the Coast Guard proposes to
amend 33 CFR part 110 as follows:
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Parts 51 and 59
[EPA–HQ–OAR–2006–0971; FRL–8788–4]
PART 110—ANCHORAGE
REGULATIONS
RIN 2060–AP33
1. The authority citation for part 110
continues to read as follows:
National Volatile Organic Compound
Emission Standards for Aerosol
Coatings
Authority: 33 U.S.C. 471, 1221 through
1236, 2030, 2035, 2071; 33 CFR 1.05–1;
Department of Homeland Security Delegation
No. 0170.1.
AGENCY: Environmental Protection
Agency (EPA).
ACTION: Proposed rule.
2. Amend § 110.60, by revising
paragraph (d)(10) to read as follows:
§ 110.60 Captain of the Port, New
York.
*
*
*
*
*
(d) * * *
(10) Perth Amboy, NJ. All waters
bound by the following points:
40°30′26.00″ N, 074°15′42.00″ W; thence
to 40°30′24.29″ N, 074°15′35.20″ W;
thence to 40°30′02.79″ N, 074°15′44.16″
W; thence to 40°29′35.70″ N,
074°16′08.88″ W; thence to 40°29′31.00″
N, 074°16′20.75″ W; thence to
40°29′47.26″ N, 074°16′49.82″ W; thence
to 40°30′02.00″ N, 074°16′41.00″ W,
thence along the shoreline to the point
of origin.
(i) This area is limited to vessels no
greater than 20 meters in length and is
primarily for use by recreational craft on
a seasonal or transient basis. These
regulations do not prohibit the
placement of moorings within the
anchorage area, but requests for the
placement of moorings should be
directed to the Raritan Yacht Club Fleet
Captain (telephone 732–297–7727, 732–
826–2277 or VHF Channel 9) to ensure
compliance with local and state laws.
All moorings shall be so placed that no
vessel, when anchored, will at any time
extend beyond the limits of the area.
Fixed mooring piles or stakes are
prohibited seaward of the pier head
line. Mariners are encouraged to contact
the Raritan Yacht Club Fleet Captain for
any additional ordinances or laws and
to ensure compliance with additional
applicable state and local laws.
(ii)[Reserved]
*
*
*
*
*
SUMMARY: EPA is proposing to amend
the National Volatile Organic
Compound Emission Standards for
Aerosol Coatings (aerosol coatings
reactivity rule), which establishes
national reactivity-based emission
standards for the aerosol coatings
category (aerosol spray paints) under
section 183(e) of the Clean Air Act. This
proposed action amends Table 2A of the
aerosol coatings reactivity rule by
adding compounds and associated
reactivity factors based on petitions we
received; and by clarifying which
volatile organic compounds are to be
quantified in compliance
determinations. Additionally, we are
proposing certain changes related to the
notice required for a company to certify
that it will assume the responsibility for
compliance with record keeping and
reporting requirements for a regulated
entity, and taking comment on whether
to change who is liable following such
certification. Finally, this action
proposes minor revisions and
corrections to the aerosol coatings
reactivity rule.
DATES: Comments must be received on
or before May 4, 2009, unless a public
hearing is requested by April 13, 2009.
If a hearing is requested on the proposed
rule, written comments must be
received by May 18, 2009.
Public Hearing. If anyone contacts
EPA requesting to speak at a public
hearing concerning the proposed
regulation by April 13, 2009, a public
hearing will be held on or about April
17, 2009.
ADDRESSES: Submit your comments,
identified by Docket ID No. EPA–HQ–
OAR–2006–0971, by one of the
following methods:
PO 00000
Frm 00007
Fmt 4702
Sfmt 4702
E:\FR\FM\02APP1.SGM
02APP1
14942
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
• E-mail: a-and-r-docket@epa.gov.
• Fax: (202) 566–1741.
• Mail: Air and Radiation Docket,
Environmental Protection Agency,
Mailcode 6102T, 1200 Pennsylvania
Avenue, NW., Washington, DC 20460.
Please include a total of two copies. We
request that a separate copy also be sent
to the contact person identified below
(see FOR FURTHER INFORMATION CONTACT).
In addition, please mail a copy of your
comments on the information collection
provisions to the Office of Information
and Regulatory Affairs, Office of
Management and Budget (OMB), Attn:
Desk Officer for EPA, 725 17 St., NW.,
Washington, DC 20503.
• Hand Delivery: EPA Docket Center,
Public Reading Room, EPA West, Room
3334, 1301 Constitution Ave., NW.,
Washington, DC 20460. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
the applicable docket. EPA’s policy is
that all comments received will be
included in the public docket without
change and may be made available
online at https://www.regulations.gov,
including any personal information
provided, unless the comment includes
information claimed to be confidential
business information (CBI) or other
information whose disclosure is
restricted by statute. Do not submit
information that you consider to be CBI
or otherwise protected through
www.regulations.gov or e-mail. The
www.regulations.gov Web site is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
www.regulations.gov, your e-mail
address will be automatically captured
and included as part of the comment
that is placed in the public docket and
made available on the Internet. If you
submit an electronic comment, EPA
recommends that you include your
name and other contact information in
the body of your comment and with any
disk or CD–ROM you submit. If EPA
cannot read your comment due to
technical difficulties and cannot contact
you for clarification, EPA may not be
able to consider your comment.
Electronic files should avoid the use of
special characters, any form of
encryption, and be free of any defects or
viruses.
Public Hearing. If a public hearing is
held, it will be held at 10 a.m. at
Building C on the EPA campus in
Research Triangle Park, NC, or at an
alternate site nearby. Persons interested
in presenting oral testimony must
contact Ms. Joan C. Rogers, U.S. EPA,
Office of Air Quality Planning and
Standards, Sector Policies and Programs
Division, Natural Resources and
Commerce Group (E143–03), Research
Triangle Park, North Carolina 27711,
telephone number: (919) 541–4487, fax
number (919) 541–3470, e-mail address:
rogers.joanc@epa.gov, no later than
April 13, 2009. Persons interested in
attending the public hearing must also
call Ms. Rogers to verify the time, date
and location of the hearing. If no one
contacts Ms. Rogers by April 13, 2009
with a request to present oral testimony
at the hearing, we will cancel the
hearing.
Docket: All documents in the docket
are listed in the www.regulations.gov
index. Although listed in the index,
some information is not publicly
available, e.g., CBI or other information
whose disclosure is restricted by statute.
Certain other material, such as
copyrighted material, is not placed on
the Internet and will be publicly
available only in hard copy form.
Publicly available docket materials are
available either electronically through
www.regulations.gov or in hard copy at
the EPA Docket Center, Public Reading
NAICS
code a
Category
32551
All Other Miscellaneous Chemical Production and Preparation
Manufacturing.
dwashington3 on PROD1PC60 with PROPOSALS
Paint and Coating Manufacturing ...................................................
325998
a North
Room, EPA West, Room 3334, 1301
Constitution Ave., NW., Washington,
DC 20460. The Public Reading Room is
open from 8:30 a.m. to 4:30 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
Public Reading Room is (202) 566–1742,
and the telephone number for the Air
Docket is (202) 566–1744.
FOR FURTHER INFORMATION CONTACT: For
information concerning the aerosol
coatings reactivity rule, contact Ms. J.
Kaye Whitfield, U.S. EPA, Office of Air
Quality Planning and Standards, Sector
Policies and Programs Division, Natural
Resources and Commerce Group (E143–
03), Research Triangle Park, North
Carolina 27711, telephone number:
(919) 541–2509, fax number (919) 541–
3470, e-mail address:
whitfield.kaye@epa.gov. For information
concerning the Clean Air Act (CAA)
section 183(e) consumer and
commercial products program, contact
Mr. Bruce Moore, U.S. EPA, Office of
Air Quality Planning and Standards,
Sector Policies and Programs Division,
Natural Resources and Commerce Group
(E143–03), Research Triangle Park,
North Carolina 27711, telephone
number: (919) 541–5460, fax number
(919) 541–3470, e-mail address:
moore.bruce@epa.gov.
Entities
Potentially Affected by This Action. The
entities potentially affected by this
regulation encompass all steps in
aerosol coatings operations. This
includes manufacturers, processors,
wholesale distributors and retailers who
fall within the regulatory definition of
‘‘distributor,’’ importers of aerosol
coatings for sale or distribution in the
United States, and manufacturers,
processors, wholesale distributors, and
importers who supply the entities listed
above with aerosol coatings for sale or
distribution in interstate commerce in
the United States. The entities
potentially affected by this action
include:
SUPPLEMENTARY INFORMATION:
Examples of regulated entities
Manufacturing of lacquers, varnishes, enamels, epoxy coatings,
oil and alkyd vehicle, plastisols, polyurethane, primers, shellacs, stains, water repellant coatings.
Aerosol can filling, aerosol packaging services.
American Industry Classification System https://www.census.gov/epcd/www/naics.html.
This table is not intended to be
exhaustive, but rather provides a guide
for readers regarding entities likely to be
affected by this action. To determine
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
whether you would be affected by this
action, you should examine the
applicable industry description in
section I.E of the promulgation
PO 00000
Frm 00008
Fmt 4702
Sfmt 4702
preamble, published at 73 FR 15604
(March 24, 2008). If you have any
questions regarding the applicability of
this action to a particular entity, consult
E:\FR\FM\02APP1.SGM
02APP1
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
dwashington3 on PROD1PC60 with PROPOSALS
the appropriate EPA contact listed in
the FOR FURTHER INFORMATION CONTACT
section of this notice.
Preparation of Comments. Do not
submit information containing CBI to
EPA through www.regulations.gov or
e-mail. Send or deliver information
identified as CBI only to the following
address: Mr. Roberto Morales, OAQPS
Document Control Officer (C404–02),
U.S. EPA, Office of Air Quality Planning
and Standards, Research Triangle Park,
North Carolina 27711, Attention: Docket
ID EPA–HQ–OAR–2006–0971. Clearly
mark the part or all of the information
that you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
World Wide Web (WWW). In addition
to being available in the docket, an
electronic copy of this proposed action
will also be available on the WWW
through the Technology Transfer
Network (TTN). Following signature, a
copy of the proposed action will be
posted on the TTN’s policy and
guidance page for newly proposed or
promulgated rules at the following
address: https://www.epa.gov/ttn/oarpg/.
The TTN provides information and
technology exchange in various areas of
air pollution control.
Organization of This Document. The
information presented in this action is
organized as follows:
I. Background
II. Summary of Proposed Amendments to the
National Volatile Organic Compound
Emission Standards for Aerosol Coatings
A. Amendments to Tables 2A, 2B, and
2C—Reactivity Factors
B. Clarification to part 59, subpart E
C. The Certification Process for the
Assumption of Recordkeeping and
Reporting Obligations
D. Comments Sought on Change in
Liability following Certification under
§ 59.511(g)
E. Other Revisions
III. Statutory and Executive Order Reviews
A. Executive Order 12866: Regulatory
Planning and Review
B. Paperwork Reduction Act
C. Regulatory Flexibility Act
D. Unfunded Mandates Reform Act
E. Executive Order 13132: Federalism
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
F. Executive Order 13175: Consultation
and Coordination With Indian Tribal
Governments
G. Executive Order 13045: Protection of
Children From Environmental Health
and Safety Risks
H. Executive Order 13211: Actions
Concerning Regulations That
Significantly Affect Energy Supply,
Distribution, or Use
I. National Technology Transfer and
Advancement Act
J. Executive Order 12898: Federal Actions
To Address Environmental Justice in
Minority Populations and Low- Income
Populations
I. Background
On March 24, 2008, EPA published
national emission standards for aerosol
spray paints under section 183(e) of the
CAA (73 FR 15604, and codified in the
Code of Federal Regulations at 40 CFR
part 59, subpart E (sections 59.500–
59.516)). Section 183(e) of the CAA
requires the control of volatile organic
compounds (VOC) emissions from
certain categories of consumer and
commercial products for purposes of
reducing VOC emissions contributing to
ozone formation and nonattainment of
the ozone national ambient air quality
standards. States have previously
promulgated rules for aerosol spray
paints based upon reductions of VOC by
mass; however, EPA concluded that a
national rule based upon the relative
reactivity approach achieves more
reduction in ozone formation than may
be achieved by a mass-based approach
for this specific product category. The
regulation revised EPA’s regulatory
definition of VOC, to include certain
compounds that would otherwise be
exempt, in order to account for all
reactive compounds in aerosol coatings
that contribute to ozone formation.
Therefore, certain compounds that
would not be VOC under the otherwise
applicable definition count towards the
applicable reactivity limits under the
regulation.
Originally, the compliance date for
the action, as established in the rule (73
FR 15604), was January 1, 2009.
Regulated entities were required to
submit initial notification reports 90
days in advance of the compliance date;
in this case, initial notification reports
were due on October 1, 2008.
Subsequently, on December 24, 2008,
EPA published amendments (73 FR
78994) to the rule to move the
applicability and initial compliance
dates for aerosol coatings from January
1, 2009, to July 1, 2009, and make initial
notification reports due on the
compliance date, as opposed to 90 days
in advance of the compliance date.
These changes were necessary to (1)
PO 00000
Frm 00009
Fmt 4702
Sfmt 4702
14943
allow EPA time to conduct this
rulemaking, and add compounds (and
their associated reactivity factors) that
are currently used in aerosol coatings,
but were not included in Tables 2A, 2B,
or 2C; and (2) allow regulated entities
sufficient time to develop initial
notification reports based on the revised
tables. Making initial notification
reports due on the compliance date
results in the aerosol coatings reactivity
rule being more consistent with the
requirements of other 40 CFR part 59
rules, thereby increasing clarity and
avoiding confusion on the part of
regulated entities.
The rule (73 FR 15604) also has a
provision in § 59.511(j) that allows
regulated entities to petition EPA to add
compounds to Tables 2A, 2B, and 2C—
Reactivity Factors of subpart E, 40 CFR
part 59, which is one of the subjects of
this action.
II. Summary of Proposed Amendments
to the National Volatile Organic
Compound Emission Standards for
Aerosol Coatings
EPA is proposing to amend the
aerosol coatings reactivity rule (73 FR
15604) by (1) revising Table 2A by
adding compounds and associated
reactivity factors based on petitions we
received; (2) clarifying which VOC are
to be quantified in compliance
determinations in 40 CFR part 59,
subpart E; (3) proposing certain changes
related to the notice required for a
company to certify that it will assume
the responsibility for compliance with
record keeping and reporting
requirements for a regulated entity; (4)
taking comment on whether to change
who is liable following such
certification; and (5) proposing certain
minor revisions and corrections.
A. Amendments to Tables 2A, 2B, and
2C—Reactivity Factors
Section 59.511(j) of the rule (73 FR
15604) allows regulated entities to
petition EPA to add compounds to
Tables 2A, 2B, and 2C. For each
compound, the petition must include
the chemical name, Chemical Abstract
Service (CAS) number, a statement
certifying the intent to use the
compound in an aerosol coatings
product, and adequate information for
EPA to evaluate the reactivity of the
compound and assign a reactivity factor
consistent with the values for the other
compounds currently on the tables.
Through this action, we are proposing to
add 128 compounds to Table 2A in
response to the petitions we received
from the regulated entities.
Tables 2A, 2B, and 2C list compounds
and associated reactivity factors known
E:\FR\FM\02APP1.SGM
02APP1
14944
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
dwashington3 on PROD1PC60 with PROPOSALS
to be used in aerosol coatings, and
currently include 45 individual
compounds, 20 aliphatic hydrocarbon
solvent mixtures, and four aromatic
hydrocarbon solvent mixtures. Three
regulated entities and one trade
association that obtained certifications
on behalf of its member regulated
entities petitioned EPA requesting an
additional 168 compounds or mixtures
be added to Table 2A. Of the 168
compounds or mixtures identified by
petitioners, we have added reactivity
factors for 122 compounds identified by
the petitioners and six compounds
similar to those identified by the
petitioners. Twenty-nine compounds or
mixtures identified by the petitioners
were already listed or addressed in
Table 2A, 2B, or 2C; six were treated as
duplicates; and five were rejected
because no information was provided to
determine a reactivity factor.
Further information is provided in the
docket that describes each of the
compounds or mixtures that were
identified in the petitions and how each
compound or mixture is being
addressed in this proposal. As indicated
previously in section I of this preamble,
the applicability, initial compliance
date and initial notification for aerosol
coatings were moved from January 1,
2009, to July 1, 2009 (73 FR 78994) due
to the large number of compounds that
we received petitions for and the
necessary review.
B. Clarification to Part 59, Subpart E
In the aerosol coatings reactivity rule
(73 FR 15604), we amended the
regulatory definition of VOC in 40 CFR
51.100(s) for the purposes of
determining compliance with the
regulation (as described in 40 CFR part
59—National Volatile Organic
Compound Emission Standards for
Consumer and Commercial Products) so
that any organic compound in the
volatile portion of an aerosol coating is
counted towards the product’s
reactivity-based limit (i.e., ‘‘Because
even less reactive VOC contribute to
ozone formation, we are amending the
regulatory definition of VOC for
purposes of this rule by adding 40 CFR
51.100(s)(7).’’) In the text of
§ 51.100(s)(7) adopted in the March 24,
2008 rule, it was not clear that the
compounds listed in both
§§ 51.100(s)(1) and 51.100(s)(5) were to
be counted as VOC for determining
compliance with the aerosol coatings
reactivity rule in 40 CFR part 59. In this
action, we are proposing changes to the
previously amended definition of VOC
in part 51 to clarify that compounds that
are excluded from the definition of VOC
under both 40 CFR 51.100(s)(1) and
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
(s)(5) are to be counted as VOC for the
purposes of determining compliance
with the aerosol coatings reactivity rule
in 40 CFR part 59, subpart E.
C. The Certification Process for the
Assumption of Recordkeeping and
Reporting Obligations
As provided in §§ 59.501(b)(4),
59.510(b) and 59.511(g), a manufacturer,
importer or distributor may choose to
certify that it will assume the
responsibility of maintaining records
and submitting reports required under
this subpart for a regulated entity. To
assume that responsibility, the entity
making the certification submits a
document as described in § 59.511(g). In
this action, EPA is proposing the
following amendments to § 59.511(g):
EPA is proposing to amend
§ 59.511(g) to call the certification
document a ‘‘notice’’ rather than a
‘‘report.’’ EPA is proposing this change
because it believes that the word
‘‘notice’’ is a more accurate word to
describe the document.
EPA is seeking comment on options
for a method to ensure that both the
certifying entity and the regulated entity
have full knowledge of what
responsibilities are being assumed by
the certifying entity. This is important
because the regulations permit the
certifying entity to assume ‘‘any or all’’
of the recordkeeping and reporting
requirements (see § 59.501(b)(4)) and the
§ 59.511(g) certifying document must
identify the ‘‘specific requirements’’ that
are being assumed by the certifying
entity. One option is to revise
59.511(g)(4) to require that both the
regulated entity and the certifying entity
sign the document. Currently, the
language in § 59.511(g)(4) provides that
the document will be signed by ‘‘the
company’’ without specifying whether
this refers to the certifying entity or the
regulated entity. Industry
representatives have requested that EPA
clarify that only the certifying entity
must sign the notice before the
certifying entity can assume the
regulated entity’s recordkeeping and
reporting responsibilities, explaining
that requiring the certifying entity to
obtain the signature of the regulated
entity would be burdensome. A second
option is to require the certifying entity
to send the 59.511(g) notice to the
regulated entity at the same time as it
sends it to EPA. EPA seeks comments
on these options in order to determine
the appropriate balance between (1)
ensuring that both parties have full
knowledge of what responsibilities are
being assumed by the certifying entity,
and (2) ensuring that the certification
process is not burdensome.
PO 00000
Frm 00010
Fmt 4702
Sfmt 4702
EPA is proposing to amend
§ 59.511(g)(3) to provide a more detailed
description of what responsibilities are
being assumed by the certifying entity
and other related information about the
division of responsibility between the
certifying entity and regulated entity
and how the recordkeeping and
reporting requirements will be met. EPA
seeks comments on what additional
details should be provided and what
additional burdens this would impose.
EPA is proposing to add a provision
to § 59.511(g) (to be numbered (g)(4))
requiring that the certifying document
contain a statement that the certifying
entity understands that the failure to
fulfill the responsibilities that it is
assuming may result in an enforcement
action against it.
In addition to these proposed
amendments to § 59.511(g), EPA is
proposing certain amendments to
provisions related to the notices in
§ 59.511(g):
EPA is proposing to add the word
‘‘distributors’’ to § 59.501(b)(4) to make
clear that distributors as well as
manufacturers and importers can be a
certifying entity. The language currently
in § 59.501(b)(4) only refers to
‘‘manufacturers and importers,’’ while
the language in § 59.511(g) refers to
‘‘manufacturers, importers and
distributors.’’ This amendment will
make these two provisions consistent
and avoid any confusion as to whether
distributors may be a certifying entity.
EPA is proposing to amend
§ 59.510(b) to replace the phrase
‘‘certifying manufacturer’’ with
‘‘certifying entity’’ in order to make
clear that § 59.510(b) applies to all
certifying entities and not just those
certifying entities who are
manufacturers.
EPA is also requesting comment on
whether the 59.511(g) notice should be
a certain form or contain certain
language to fulfill the requirements of
this section.
D. Comments Sought on Change in
Liability following Certification Under
§ 59.511(g)
Currently, §§ 59.501(b), 59.510(a),
59.511(a) provide that a regulated entity
is responsible for recordkeeping and
reporting requirements if no other entity
(the ‘‘certifying entity’’) has certified
that it will assume the responsibility for
such requirements under the provisions
in § 59.511(g). EPA is seeking comment
on whether the regulations should
provide that both the certifying entity
and the regulated entity are liable for
the recordkeeping and reporting
requirements covered by a notice
submitted under § 59.511(g), such that
E:\FR\FM\02APP1.SGM
02APP1
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
both would be liable for the failure to
keep records or submit reports and for
inaccurate records or reports.
E. Other Revisions
Finally, in this action, we will
propose minor revisions and edits to
include corrections to EPA regional
office addresses, and several minor
changes and corrections in Table 2A.
Specifically, we deleted the listing for
Di (2-ethylhexyl phthalate) (CAS 117–
81–7) for which there is no applicable
reactivity factor; eliminated a duplicate
listing of Butanol (CAS 71–36–3); and
corrected the CAS number for Isobutane
(CAS 75–28–5) and the reactivity factor
for Ethylene Glycol Monobutyl Ether [2Butoxyethanol] (CAS 111–76–2). Given
the multiple ways to name individual
organic compounds, we have sorted
Table 2A according to CAS number to
make it easier for regulated entities to
find a specific chemical. Classes of
compounds for which there is no
specific CAS number are listed at the
end of the table.
III. Statutory and Executive Order
Reviews
A. Executive Order 12866: Regulatory
Planning and Review
Under Executive Order (EO) 12866
(58 FR 51735, October 4, 1993), this
action is a ‘‘significant regulatory
action,’’ as it raises novel legal or policy
issues. Accordingly, EPA submitted this
action to OMB for review under EO
12866 and any changes made in
response to OMB recommendations
have been documented in the docket for
this action.
dwashington3 on PROD1PC60 with PROPOSALS
B. Paperwork Reduction Act
This action does not impose any new
information collection burden; it only
proposes amendments and minor
corrections to the aerosol coatings
reactivity rule by (1) adding compounds
and associated reactivity factors based
on petitions we received; (2) clarifying
which volatile organic compounds are
to be quantified in compliance
determinations; (3) proposing certain
changes related to the notice required
for a company to certify that it will
assume the responsibility for
compliance with record keeping and
reporting requirements for a regulated
entity; and by (4) proposing certain
minor revisions and corrections.
However, the OMB has previously
approved the information collection
requirements contained in the existing
regulations, i.e., the National Volatile
Organic Compound Emission Standards
for Aerosol Coatings, 40 CFR part 59,
subpart E (73 FR 15604, March 24, 2008)
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
under the provisions of the Paperwork
Reduction Act, 44 U.S.C. 3501 et seq.
and has assigned OMB control number
2060–0617. The OMB control numbers
for EPA’s regulations in 40 CFR are
listed in 40 CFR part 9.
C. Regulatory Flexibility Act
The Regulatory Flexibility Act (RFA)
generally requires an agency to prepare
a regulatory flexibility analysis of any
rule subject to notice and comment
rulemaking requirements under the
Administrative Procedure Act or any
other statute unless the agency certifies
that the rule will not have a significant
economic impact on a substantial
number of small entities. Small entities
include small businesses, small
organizations, and small governmental
jurisdictions.
For purposes of assessing the impacts
of this rule on small entities, small
entity is defined as: (1) A small business
as defined by the Small Business
Administration’s (SBA) regulations at 13
CFR 121.201; (2) a small governmental
jurisdiction that is a government of a
city, county, town, school district or
special district with a population of less
than 50,000; and (3) a small
organization that is any not-for-profit
enterprise which is independently
owned and operated and is not
dominant in its field.
After considering the economic
impacts of this proposed rule on small
entities, I certify that this action will not
have a significant economic impact on
a substantial number of small entities.
This proposed rule will not impose any
new requirements on small entities. We
have determined that small businesses
will not incur any adverse impacts
because EPA is taking this action to
propose minor corrections and
amendments to the Aerosol Coatings
final rule, and these corrections and
amendments do not create any new
requirements or burdens. No costs are
associated with these amendments.
We continue to be interested in the
potential impacts of the proposed rule
on small entities and welcome
comments on issues related to such
impacts.
D. Unfunded Mandates Reform Act
This proposed rule does not contain
a Federal mandate that may result in
expenditures of $100 million or more
for State, local, and tribal governments,
in the aggregate, or the private sector in
any one year. This action only proposes
amendments and minor corrections to
the aerosol coatings reactivity rule by (1)
adding compounds and associated
reactivity factors based on petitions we
received; (2) clarifying which volatile
PO 00000
Frm 00011
Fmt 4702
Sfmt 4702
14945
organic compounds are to be quantified
in compliance determinations; (3)
proposing certain changes related to the
notice required for a company to certify
that it will assume the responsibility for
compliance with record keeping and
reporting requirements for a regulated
entity; and (4) proposing certain minor
revisions and corrections. Thus, this
rule is not subject to the requirements
of sections 202 or 205 of the Unfunded
Mandates Reform Act (UMRA).
This proposed rule is also not subject
to the requirements of section 203 of
UMRA because it contains no regulatory
requirements that might significantly or
uniquely affect small governments.
E. Executive Order 13132: Federalism
EO 13132, entitled ‘‘Federalism’’ (64
FR 43255, August 10, 1999), requires
EPA to develop an accountable process
to ensure ‘‘meaningful and timely input
by state and local officials in the
development of regulatory policies that
have federalism implications.’’ ‘‘Policies
that have federalism implications’’ is
defined in the EO to include regulations
that have ‘‘substantial direct effects on
the states, on the relationship between
the national government and the states,
or on the distribution of power and
responsibilities among the various
levels of government.’’
This proposed rule does not have
federalism implications. It will not have
substantial direct effects on the states,
on the relationship between the national
government and the states, or on the
distribution of power and
responsibilities among the various
levels of government, as specified in EO
13132. This action only proposes
amendments and minor corrections to
the aerosol coatings reactivity rule by (1)
adding compounds and associated
reactivity factors based on petitions we
received; (2) clarifying which volatile
organic compounds are to be quantified
in compliance determinations; (3)
proposing certain changes related to the
notice required for a company to certify
that it will assume the responsibility for
compliance with record keeping and
reporting requirements for a regulated
entity; and (4) proposing certain minor
revisions and corrections. Thus, EO
13132 does not apply to this rule.
In the spirit of EO 13132, and
consistent with EPA policy to promote
communications between EPA and state
and local governments, EPA specifically
solicits comment on this proposed rule
from state and local officials.
E:\FR\FM\02APP1.SGM
02APP1
14946
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
F. Executive Order 13175: Consultation
and Coordination With Indian Tribal
Governments
This action does not have tribal
implications, as specified in EO 13175
(65 FR 67249, November 9, 2000.) This
action will not impose any new
obligations or enforceable duties on
tribal governments.
EPA specifically solicits additional
comment on this proposed action from
tribal officials.
G. Executive Order 13045: Protection of
Children From Environmental Health
and Safety Risks
EPA interprets EO 13045 (62 FR
19885, April 23, 1997) as applying only
to those regulatory actions that concern
health or safety risks, such that the
analysis required under section 5–501 of
the EO has the potential to influence the
regulation. This action is not subject to
EO 13045 because it does not establish
an environmental standard intended to
mitigate health or safety risks.
dwashington3 on PROD1PC60 with PROPOSALS
H. Executive Order 13211: Actions
Concerning Regulations That
Significantly Affect Energy Supply,
Distribution, or Use
This action is not a ‘‘significant
energy action’’ as defined in EO 13211
(66 FR 28355 (May 22, 2001)), because
it is not likely to have a significant
adverse effect on the supply,
distribution, or use of energy. Further,
we have concluded that this rule is not
likely to have any adverse energy effects
because EPA is taking this action to
propose minor corrections and
amendments to the Aerosol Coatings
final rule, and these corrections and
amendments do not create any new
requirements.
I. National Technology Transfer and
Advancement Act
Section 12(d) of the National
Technology Transfer and Advancement
Act of 1995 (‘‘NTTAA’’), Public Law No.
104–113, 12(d) (15 U.S.C. 272 note)
directs EPA to use voluntary consensus
standards in its regulatory activities
unless to do so would be inconsistent
with applicable law or otherwise
impractical. Voluntary consensus
standards are technical standards (e.g.,
materials specifications, test methods,
sampling procedures, and business
practices) that are developed or adopted
by voluntary consensus standards
bodies. NTTAA directs EPA to provide
Congress, through OMB, explanations
when the Agency decides not to use
available and applicable voluntary
consensus standards.
This proposed rulemaking does not
involve technical standards. Therefore,
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
EPA is not considering the use of any
voluntary consensus standards.
J. Executive Order 12898: Federal
Actions To Address Environmental
Justice in Minority Populations and
Low-Income Populations
EO 12898 (59 FR 7629 (Feb. 16, 1994))
establishes federal executive policy on
environmental justice. Its main
provision directs federal agencies, to the
greatest extent practicable and
permitted by law, to make
environmental justice part of their
mission by identifying and addressing,
as appropriate, disproportionately high
and adverse human health or
environmental effects of their programs,
policies, and activities on minority
populations and low-income
populations in the United States.
EPA has concluded that it is not
practicable to determine whether there
would be disproportionately high and
adverse human health or environmental
effects on minority and/or low income
populations from this proposed rule.
The proposed rule only makes
amendments and minor corrections to
the aerosol coatings reactivity rule by (1)
adding compounds and associated
reactivity factors based on petitions we
received; (2) clarifying which volatile
organic compounds are to be quantified
in compliance determinations; (3)
proposing certain changes related to the
notice required for a company to certify
that it will assume the responsibility for
compliance with record keeping and
reporting requirements for a regulated
entity; and by (4) proposing certain
minor revisions and corrections.
Chapter I of the Code of Federal
Regulations are proposed to be amended
as follows:
PART 51—[AMENDED]
1. The authority citation for part 51
continues to read as follows:
Authority: 23 U.S.C. 101; 42 U.S.C 7401–
7671q.
2. Section 51.100(s)(7) is revised to
read as follows:
§ 51.100
*
*
*
*
(s) * * *
(7) For the purposes of determining
compliance with EPA’s aerosol coatings
reactivity based regulation (as described
in 40 CFR part 59—National Volatile
Organic Compound Emission Standards
for Consumer and Commercial
Products) any organic compound in the
volatile portion of an aerosol coating is
counted towards the product’s
reactivity-based limit, as provided in 40
CFR part 59, subpart E. Therefore, the
compounds that are used in aerosol
coating products and that are identified
in paragraphs (s)(1) or (s)(5) of this
section as excluded from EPA’s
definition of VOC are to be counted
towards a product’s reactivity limit for
the purposes of determining compliance
with EPA’s aerosol coatings reactivitybased national regulation, as provided
in 40 CFR part 59, subpart E.
*
*
*
*
*
PART 59—[AMENDED]
3. The authority citation for part 59
continues to read as follows:
List of Subjects
Authority: 42 U.S.C 7414 and 7511b(e).
40 CFR Part 51
Environmental protection,
Administrative practice and procedure,
Air pollution control, Carbon monoxide,
Intergovernmental relations, Lead,
Nitrogen dioxide, Ozone, Particulate
matter, Reporting and recordkeeping
requirements, Sulfur oxides, Volatile
organic compound, Consumer products,
Aerosol products, Aerosol coatings,
Consumer and commercial products.
40 CFR Part 59
Environmental protection,
Administrative practice and procedure,
Air pollution control, Incorporation by
reference, Intergovernmental relations,
Reporting and recordkeeping
requirements.
Dated: March 25, 2009.
Lisa P. Jackson,
Administrator.
Frm 00012
Fmt 4702
Sfmt 4702
4. Section 59.501 is amended by
revising paragraph (b)(4) to read as
follows:
§ 59.501
Am I subject to this subpart?
*
*
*
*
*
(b) * * *
(4) If you are a manufacturer,
importer, or distributor, you can choose
to certify that you will provide any or
all of the recordkeeping and reporting
requirements of §§ 59.510 and 59.511 by
following the procedures of §§ 59.511(g)
and 59.511(h).
*
*
*
*
*
5. Section 59.510(b) is amended by
revising paragraph (b) to read as follows:
§ 59.510 What records am I required to
maintain?
*
For the reasons set out in the
preamble, parts 51 and 59 of title 40,
PO 00000
Definitions.
*
*
*
*
*
(b) By providing the written
certification to the Administrator in
accordance with § 59.511(g), the
certifying entity accepts responsibility
E:\FR\FM\02APP1.SGM
02APP1
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
for compliance with the recordkeeping
requirements of this section with
respect to any products covered by the
written certification, as detailed in the
written certification. Failure to maintain
the required records may result in
enforcement action by EPA against the
certifying entity in accordance with the
enforcement provisions applicable to
violation of these provisions by
regulated entities. If the certifying entity
revokes its certification, as allowed by
§ 59.511(h), the regulated entity must
assume responsibility for maintaining
all records required by this section.
6. Section 59.511 is amended by
revising paragraphs (g) introductory
text, (g)(3), and (g)(4), to read as follows:
§ 59.511 What notifications and reports
must I submit?
*
*
*
*
*
(g) If you are a manufacturer,
importer, or distributor who chooses to
certify that you will maintain records
for a regulated entity for all or part of
the purposes of § 59.510 and this
section, you must submit a notice to the
appropriate Regional Office listed in
§ 59.512. This notice must include the
information contained in paragraphs
(g)(1) through (g)(4) of this section.
*
*
*
*
*
(3) Description of specific
requirements in § 59.510 and this
section for which you are assuming
responsibility and explanation of how
all required information under this
subpart will be maintained and
submitted, as required, by you or the
regulated entity; including
identification of the products covered
by the notice and the location or
locations where the records will be
maintained; and
(4) A statement that the certifying
entity understands that the failure to
fulfill the responsibilities that it is
assuming may result in an enforcement
action in accordance with the
enforcement provisions applicable to
violation of these provisions by
regulated entities.
*
*
*
*
*
7. Section 59.512 is amended to revise
the addresses for Regions I, IV, VII, and
VIII to read as follows:
§ 59.512
offices.
*
Addresses of EPA regional
*
*
*
*
14947
EPA Region I (Connecticut, Maine,
Massachusetts, New Hampshire,
Rhode Island, Vermont), Director,
Office of Environmental Stewardship,
1 Congress St., Suite 1100, Boston,
MA 02114–2023.
*
*
*
*
*
EPA Region IV (Alabama, Florida,
Georgia, Kentucky, Mississippi, North
Carolina, South Carolina, Tennessee)
Director, Air Pesticides and Toxics,
Management Division, Atlanta
Federal Center, 61 Forsyth Street,
SW., Atlanta, GA 30303–3104.
*
*
*
*
*
EPA Region VII (Iowa, Kansas, Missouri,
Nebraska) Director, Air Toxics
Division, 901 North 5th Street, Kansas
City, KS 66101.
EPA Region VIII (Colorado, Montana,
North Dakota, South Dakota, Utah,
Wyoming) Director, Air and Toxics
Division, 1595 Wynkoop Street,
Denver, CO 80202–1129.
*
*
*
*
*
8. Table 2A to subpart E of part 59—
Reactivity Factors is revised to read as
follows:
TABLE 2A TO SUBPART E OF PART 59—REACTIVITY FACTORS
dwashington3 on PROD1PC60 with PROPOSALS
Compound
CAS No.
Formaldehyde ............................................................................................................................................................
Glycerol (1,2,3-Propanetriol) ......................................................................................................................................
Propylene Glycol ........................................................................................................................................................
Ethanol .......................................................................................................................................................................
Formic Acid ................................................................................................................................................................
Acetic Acid .................................................................................................................................................................
Methanol ....................................................................................................................................................................
Isopropyl Alcohol (2-Propanol) ..................................................................................................................................
Acetone (Propanone) .................................................................................................................................................
n-Propanol (n-Propyl Alcohol) ...................................................................................................................................
n-Butyl Alcohol (Butanol) ...........................................................................................................................................
n-Pentanol (Amyl Alcohol) .........................................................................................................................................
Benzene .....................................................................................................................................................................
1,1,1-Trichloroethane .................................................................................................................................................
Propane .....................................................................................................................................................................
Vinyl Chloride .............................................................................................................................................................
Acetaldehyde .............................................................................................................................................................
Methylene Chloride (Dichloromethane) .....................................................................................................................
Ethylene Oxide ..........................................................................................................................................................
Isobutane ...................................................................................................................................................................
HFC-152A (1,1-Difluoroethane) .................................................................................................................................
Propylene Oxide ........................................................................................................................................................
t-Butyl Alcohol ............................................................................................................................................................
Methyl t-Butyl Ketone ................................................................................................................................................
Isophorone (3,5,5-Trimethyl-2-Cyclohexenone) ........................................................................................................
Isopentane .................................................................................................................................................................
Isobutanol ..................................................................................................................................................................
2-Butanol (s-Butyl Alcohol) ........................................................................................................................................
Methyl Ethyl Ketone (2-Butanone) ............................................................................................................................
Monoisopropanol Amine (1-Amino-2-Propanol) ........................................................................................................
Trichloroethylene .......................................................................................................................................................
Propionic Acid ............................................................................................................................................................
Acrylic Acid ................................................................................................................................................................
Methyl Acetate ...........................................................................................................................................................
Nitroethane ................................................................................................................................................................
Methacrylic Acid .........................................................................................................................................................
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
PO 00000
Frm 00013
Fmt 4702
Sfmt 4702
E:\FR\FM\02APP1.SGM
02APP1
50–00–0
56–81–5
57–55–6
64–17–5
64–18–6
64–19–7
67–56–1
67–63–0
67–64–1
71–23–8
71–36–3
71–41–0
71–43–2
71–55–6
74–98–6
75–01–4
75–07–0
75–09–2
75–21–8
75–28–5
75–37–6
75–56–9
75–65–0
75–97–8
78–59–1
78–78–4
78–83–1
78–92–2
78–93–3
78–96–6
79–01–6
79–09–4
79–10–7
79–20–9
79–24–3
79–41–4
Reactivity
factor
8.97
3.27
2.75
1.69
0.08
0.71
0.71
0.71
0.43
2.74
3.34
3.35
0.81
0.00
0.56
2.92
6.84
0.07
0.05
1.35
0.00
0.32
0.45
0.78
10.58
1.68
2.24
1.60
1.49
13.42
0.60
1.16
11.66
0.07
12.79
18.78
14948
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
TABLE 2A TO SUBPART E OF PART 59—REACTIVITY FACTORS—Continued
dwashington3 on PROD1PC60 with PROPOSALS
Compound
CAS No.
a-Pinene (Pine Oil) ....................................................................................................................................................
Methyl Methacrylate ...................................................................................................................................................
Naphthalene ...............................................................................................................................................................
Xylene, ortho- ............................................................................................................................................................
o-Cresol .....................................................................................................................................................................
1,2,4-Trimethylbenzene .............................................................................................................................................
3-Pentanone ..............................................................................................................................................................
Methyl Ethyl Ketoxime (Ethyl Methyl Ketone Oxime) ...............................................................................................
Gamma-Butyrolactone ...............................................................................................................................................
Ethyl Lactate ..............................................................................................................................................................
Isobutyl Isobutyrate ....................................................................................................................................................
Isobutyl Methacrylate .................................................................................................................................................
Butyl Methacrylate .....................................................................................................................................................
PCBTF (p-Trifluoromethyl-Cl-Benzene) .....................................................................................................................
Cumene (Isopropyl Benzene) ....................................................................................................................................
a-Methyl Styrene ........................................................................................................................................................
Ethyl Benzene ............................................................................................................................................................
Styrene .......................................................................................................................................................................
Benzaldehyde ............................................................................................................................................................
Triethanolamine .........................................................................................................................................................
2-Ethyl-Hexyl Acetate ................................................................................................................................................
2-Ethyl-Hexyl Acrylate ...............................................................................................................................................
2-Ethyl-1-Hexanol (Ethyl Hexyl Alcohol) ...................................................................................................................
Ethyl Propionate ........................................................................................................................................................
s-Butyl Acetate ...........................................................................................................................................................
n-Propyl Propionate ...................................................................................................................................................
Xylene, para- .............................................................................................................................................................
p-Dichlorobenzene .....................................................................................................................................................
Dimethyl Succinate ....................................................................................................................................................
1,2-Epoxybutane (Ethyl Oxirane) ..............................................................................................................................
n-Propyl Bromide .......................................................................................................................................................
Butane ........................................................................................................................................................................
1,3-Butadiene .............................................................................................................................................................
Ethylene Glycol ..........................................................................................................................................................
2-Methyl-2,4-Pentanediol ...........................................................................................................................................
Isohexane Isomers ....................................................................................................................................................
Methyl n-Propyl Ketone (2-Pentanone) .....................................................................................................................
Propylene Glycol Monmethyl Ether (1-Methoxy-2-Propanol) ....................................................................................
n,n-Dimethylethanolamine .........................................................................................................................................
1-Nitropropane ...........................................................................................................................................................
Vinyl Acetate ..............................................................................................................................................................
Methyl Isobutyl Ketone ..............................................................................................................................................
Isopropyl Acetate .......................................................................................................................................................
Propylene Carbonate (4-Methyl-1,3-Dioxolan-2one) .................................................................................................
Xylene, meta- .............................................................................................................................................................
Propylene Glycol Monomethyl Ether Acetate (1-Methoxy-2-Propyl Acetate) ...........................................................
1,3,5-Trimethyl Benzene ............................................................................................................................................
Di-Isobutyl Ketone (2,6-Dimethyl-4-Heptanone) ........................................................................................................
Methylcyclohexane ....................................................................................................................................................
Toluene ......................................................................................................................................................................
Monochlorobenzene ..................................................................................................................................................
Cyclohexanol .............................................................................................................................................................
Cyclohexanone ..........................................................................................................................................................
n-Butyl Butyrate .........................................................................................................................................................
Propyl Acetate ...........................................................................................................................................................
Pentane ......................................................................................................................................................................
Ethylene Glycol Monomethyl Ether (2-Methoxyethanol) ...........................................................................................
Tetrahydrofuran .........................................................................................................................................................
Methyl Isoamyl Ketone (5-Methyl-2-Hexanone) ........................................................................................................
Isobutyl Acetate .........................................................................................................................................................
Methyl Amyl Ketone ...................................................................................................................................................
Hexane .......................................................................................................................................................................
n-Propyl Formate .......................................................................................................................................................
2-Ethoxyethanol .........................................................................................................................................................
Cyclohexane ..............................................................................................................................................................
Morpholine .................................................................................................................................................................
Dipropylene Glycol .....................................................................................................................................................
Ethylene Glycol Monoethyl Ether Acetate (2-Ethoxyethyl Acetate) ..........................................................................
Diethylenetriamine .....................................................................................................................................................
Diethanolamine ..........................................................................................................................................................
Diethylene Glycol .......................................................................................................................................................
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
PO 00000
Frm 00014
Fmt 4702
Sfmt 4702
E:\FR\FM\02APP1.SGM
02APP1
80–56–8
80–62–6
91–20–3
95–47–6
95–48–7
95–63–6
96–22–0
96–29–7
96–48–0
97–64–3
97–85–8
97–86–9
97–88–1
98–56–6
98–82–8
98–83–9
100–41–4
100–42–5
100–52–7
102–71–6
103–09–3
103–11–7
104–76–7
105–37–3
105–46–4
106–36–5
106–42–3
106–46–7
106–65–0
106–88–7
106–94–5
106–97–8
106–99–0
107–21–1
107–41–5
107–83–5
107–87–9
107–98–2
108–01–0
108–03–2
108–05–4
108–10–1
108–21–4
108–32–7
108–38–3
108–65–6
108–67–8
108–83–8
108–87–2
108–88–3
108–90–7
108–93–0
108–94–1
109–21–7
109–60–4
109–66–0
109–86–4
109–99–9
110–12–3
110–19–0
110–43–0
110–54–3
110–74–7
110–80–5
110–82–7
110–91–8
110–98–5
111–15–9
111–40–0
111–42–2
111–46–6
Reactivity
factor
4.29
15.84
3.26
7.49
2.34
7.18
1.45
22.04
1.15
2.71
0.61
8.99
9.09
0.11
2.32
1.72
2.79
1.95
0.00
2.76
0.79
2.42
2.20
0.79
1.43
0.93
4.25
0.20
0.23
1.02
0.35
1.33
13.58
3.36
1.04
1.80
3.07
2.62
4.76
16.16
3.26
4.31
1.12
0.25
10.61
1.71
11.22
2.94
1.99
3.97
0.36
2.25
1.61
1.12
0.87
1.54
2.98
4.95
2.10
0.67
2.80
1.45
0.93
3.78
1.46
15.43
2.48
1.90
13.03
4.05
3.55
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
14949
TABLE 2A TO SUBPART E OF PART 59—REACTIVITY FACTORS—Continued
dwashington3 on PROD1PC60 with PROPOSALS
Compound
CAS No.
n-Octane ....................................................................................................................................................................
2-Butoxy-1-Ethanol (Ethylene Glycol Monobutyl Ether) ............................................................................................
Diethylene Glycol Methyl Ether (2-(2-Methoxyethoxy) Ethanol) ...............................................................................
n-Nonane ...................................................................................................................................................................
2-(2-Ethoxyethoxy) Ethanol .......................................................................................................................................
Ethylene Glycol Monobutyl Ether Acetate (2-Butoxyethyl Acetate) ..........................................................................
2-(2-Ethoxyethoxy) Ethyl Acetate ..............................................................................................................................
2-(2-Butoxyethoxy)-Ethanol .......................................................................................................................................
Dimethyl Ether ...........................................................................................................................................................
Triethylamine .............................................................................................................................................................
2-Phenoxyethanol; Ethylene Glycol Phenyl Ether .....................................................................................................
Diacetone Alcohol ......................................................................................................................................................
2,4-Pentanedione .......................................................................................................................................................
Butanal .......................................................................................................................................................................
Butyl Acetate, n .........................................................................................................................................................
2-(2-Butoxyethoxy) Ethyl Acetate ..............................................................................................................................
2-Amino-2-Methyl-1-Propanol ....................................................................................................................................
Perchloroethylene ......................................................................................................................................................
Ethanolamine .............................................................................................................................................................
Ethyl acetate ..............................................................................................................................................................
Heptane .....................................................................................................................................................................
n-Hexyl Acetate (Hexyl Acetate) ...............................................................................................................................
2-Ethyl Hexanoic Acid ...............................................................................................................................................
1,2,3-Trimethyl Benzene ............................................................................................................................................
t-Butyl Acetate ...........................................................................................................................................................
Methyl Isobutyrate .....................................................................................................................................................
Methyl Lactate ...........................................................................................................................................................
Methyl Propionate ......................................................................................................................................................
1,2 Butanediol ............................................................................................................................................................
n-Butyl Propionate .....................................................................................................................................................
Methyl n-Butyl Ketone (2-Hexanone) ........................................................................................................................
Ethyl Isopropyl Ether .................................................................................................................................................
Dimethyl Adipate ........................................................................................................................................................
Methy n-Butyl Ether ...................................................................................................................................................
Amyl Acetate (Pentyl Ethanoate, Pentyl Acetate) .....................................................................................................
Ethyl n-Butyl Ether .....................................................................................................................................................
Ethyl t-Butyl Ether ......................................................................................................................................................
1,3-Dioxolane .............................................................................................................................................................
Ethyl-3-Ethoxypropionate ...........................................................................................................................................
Methyl Pyrrolidone (n-Methyl-2-Pyrrolidone) .............................................................................................................
Dimethyl Gluterate .....................................................................................................................................................
Ethylene Glycol 2-Ethylhexyl Ether [2-(2-Ethylhexyloxy) Ethanol] ............................................................................
Propylene Glycol Monopropyl Ether (1-Propoxy-2-Propanol) ...................................................................................
Propylene Glycol Monoethyl Ether (1-Ethoxy-2-Propanol) .......................................................................................
2-Methoxy-1-Propanol ...............................................................................................................................................
Methyl t-Butyl Ether ...................................................................................................................................................
Ethylcyclohexane .......................................................................................................................................................
Isoamyl Isobutyrate ....................................................................................................................................................
2-Propoxyethanol (Ethylene Glycol Monopropyl Ether) ............................................................................................
n-Butoxy-2-Propanol ..................................................................................................................................................
d-Limonene (Dipentene or Orange Terpene) ............................................................................................................
Dipropylene Glycol Methyl Ether Isomer (2-[2-Methoxypropoxy]-1-Propanol) ..........................................................
Texanol (1,3 Pentanediol, 2,2,4-Trimethyl, 1-Isobutyrate) ........................................................................................
Isodecyl Alcohol (8-Methyl-1-Nonanol) ......................................................................................................................
Tripropylene Glycol Monomethyl Ether .....................................................................................................................
Glycol Ether DPNB (1-(2-Butoxy-1-Methylethoxy) 2-Propanol) ................................................................................
Propylene Glycol t-Butyl Ether (1-tert-Butoxy-2-Propanol) .......................................................................................
2-Methoxy-1-Propyl Acetate ......................................................................................................................................
Oxo-Heptyl Acetate ....................................................................................................................................................
2-tert-Butoxy-1-Propanol ............................................................................................................................................
Oxo-Octyl Acetate ......................................................................................................................................................
C8 Disubstituted Benzenes .......................................................................................................................................
C9 Styrenes ...............................................................................................................................................................
[FR Doc. E9–7300 Filed 4–1–09; 8:45 am]
BILLING CODE 6560–50–P
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
PO 00000
Frm 00015
Fmt 4702
Sfmt 4702
E:\FR\FM\02APP1.SGM
02APP1
111–65–9
111–76–2
111–77–3
111–84–2
111–90–0
112–07–2
112–15–2
112–34–5
115–10–6
121–44–8
122–99–6
123–42–2
123–54–6
123–72–8
123–86–4
124–17–4
124–68–5
127–18–4
141–43–5
141–78–6
142–82–5
142–92–7
149–57–5
526–73–8
540–88–5
547–63–7
547–64–8
554–12–1
584–03–2
590–01–2
591–78–6
625–54–7
627–93–0
628–28–4
628–63–7
628–81–9
637–92–3
646–06–0
763–69–9
872–50–4
1119–40–0
1559–35–9
1569–01–3
1569–02–4
1589–47–5
1634–04–4
1678–91–7
2050–01–3
2807–30–9
5131–66–8
5989–27–5
13588–28–8
25265–77–4
25339–17–7
25498–49–1
29911–28–2
57018–52–7
70657–70–4
90438–79–2
94023–15–1
108419–32–5
na
na
Reactivity
factor
1.11
2.90
2.90
0.95
3.19
1.67
1.50
2.70
0.93
16.60
3.61
0.68
1.02
6.74
0.89
1.38
15.08
0.04
5.97
0.64
1.28
0.87
4.41
11.26
0.20
0.70
2.75
0.71
2.21
0.89
3.55
3.86
1.95
3.66
0.96
3.86
2.11
5.47
3.61
2.56
0.51
1.71
2.86
3.25
3.01
0.78
1.75
0.89
3.52
2.70
3.99
3.02
0.89
1.23
1.90
1.96
1.71
1.12
0.97
1.81
0.96
7.48
1.72
14950
Federal Register / Vol. 74, No. 62 / Thursday, April 2, 2009 / Proposed Rules
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
50 CFR Part 679
RIN 0648–AR06
Fisheries of the Exclusive Economic
Zone Off Alaska; Catcher Vessel
Operational Area and Inshore/Offshore
Provisions for the Bering Sea and
Aleutian Islands and the Gulf of Alaska
Groundfish Fisheries; Amendments 62/
62
dwashington3 on PROD1PC60 with PROPOSALS
AGENCY: National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Announcement of availability of
fishery management plan amendments;
request for comments.
SUMMARY: The North Pacific Fishery
Management Council has submitted
Amendment 62 to the Fishery
Management Plan for Groundfish of the
Bering Sea and Aleutian Islands
Management Area (BSAI FMP) and
Amendment 62 to the Fishery
Management Plan for Groundfish of the
Gulf of Alaska (GOA FMP). If approved,
Amendments 62/62 would revise the
BSAI FMP description of the Catcher
Vessel Operational Area (CVOA) and
remove the obsolete sunset date for
inshore/offshore sector allocations of
pollock and Pacific cod in the GOA
FMP. This action is necessary to amend
outdated FMP text so that both FMPs
are consistent with the American
Fisheries Act (AFA) and other
applicable law. This action is intended
to promote the goals and objectives of
the Magnuson-Stevens Fishery
Conservation and Management Act, the
FMPs, and other applicable laws.
DATES: Comments on Amendments 62/
62 must be received on or before June
1, 2009.
ADDRESSES: Send comments to Sue
Salveson, Assistant Regional
Administrator, Sustainable Fisheries
Division, Alaska Region, NMFS, Attn:
Ellen Sebastian. You may submit
comments, identified by ‘‘RIN 0648–
AR06’’ by any one of the following
methods:
• Electronic Submissions: Submit all
electronic public comments via the
Federal eRulemaking Portal: https://
www.regulations.gov.
• Fax: 907–586–7557.
• Mail: P. O. Box 21668, Juneau, AK
99802.
• Hand delivery to the Federal
Building: 709 West 9th Street, Room
420A, Juneau, Alaska.
VerDate Nov<24>2008
14:51 Apr 01, 2009
Jkt 217001
All comments received are a part of
the public record and will be posted to
https://www.regulations.gov without
change. All Personal Identifying
Information (e.g., name, address)
voluntarily submitted by the commenter
may be publicly accessible. Do not
submit Confidential Business
Information or otherwise sensitive or
protected information.
NMFS will accept anonymous
comments (enter N/A in the required
fields, if you wish to remain
anonymous). Attachments to electronic
comments must be in Microsoft Word,
Excel, WordPerfect, or Adobe portable
document file (pdf) formats to be
accepted.
Copies of the Environmental
Assessment/Regulatory Impact Review
(EA/RIR) prepared for this action are
available from the NMFS Alaska Region
website at https://
www.alaskafisheries.noaa.gov or from
the mailing and street addresses listed
above.
FOR FURTHER INFORMATION CONTACT:
Becky Carls, 907–586–7228.
The
Magnuson-Stevens Fishery
Conservation and Management Act
(Magnuson-Stevens Act) requires that
each regional fishery management
council submit any FMP or FMP
amendment it prepares to NMFS for
review and approval, disapproval, or
partial approval by the Secretary of
Commerce (Secretary). The MagnusonStevens Act also requires that NMFS,
upon receiving an FMP amendment,
immediately publish a notice in the
Federal Register that the FMP
amendment is available for public
review and comment. This requirement
is satisfied by this notice of availability
(NOA) for Amendments 62/62.
In June 2002, the North Pacific
Fishery Management Council (Council)
adopted Amendments 62/62 to revise
obsolete or inconsistent inshore/
offshore language in the BSAI and GOA
FMPs to make them consistent with the
AFA. A combination of circumstances
has since resulted in the delay of
submitting these amendments for
Secretarial review. Additionally, other
amendments incorporated two of the
four Council-approved FMP changes
regarding inshore/offshore language. In
April 2008, the Council reviewed
Amendments 62/62 and affirmed its
2002 decisions concerning the
remaining FMP amendments.
SUPPLEMENTARY INFORMATION:
Inshore/Offshore Language
The purpose of the revisions
recommended by the Council
concerning BSAI inshore/offshore
PO 00000
Frm 00016
Fmt 4702
Sfmt 4702
language in the FMPs was to make the
FMPs consistent with the AFA, passed
in 1998. Most of the inshore/offshore
language made obsolete by the AFA was
removed from federal regulations under
a final rule that implemented the AFA
provisions under Amendments 61/61 to
the BSAI and GOA FMPs (67 FR 79692,
December 30, 2002). To revise
additional inshore/offshore language in
the FMPs overlooked in Amendments
61/61, the following four actions were
adopted by the Council under
Amendments 62/62:
• Remove obsolete inshore/offshore
language from the BSAI FMP.
• Revise the BSAI FMP description of
the CVOA.
• Remove references to BSAI inshore/
offshore allocations from the GOA FMP.
• Remove the December 31, 2004,
sunset date for inshore/offshore sector
allocations of pollock and Pacific cod
from the GOA FMP.
Since the Council adopted
Amendments 62/62, other FMP
amendments incorporated two of the
four Council-recommended FMP
changes regarding inshore/offshore
language. The recommended removals
from the FMPs of obsolete inshore/
offshore language and references were
made under Amendments 83/75 (70 FR
35395, June 20, 2005), as part of
comprehensive housekeeping
amendments. Amendments 83/75
revised the respective FMPs by updating
harvest, ecosystem, and socioeconomic
information; consolidating text; and
organizing the information to improve
the readability of the documents.
Amendments 83/75 were approved by
the Secretary on June 14, 2005.
In April 2008, the Council reviewed
its remaining two recommendations
under Amendments 62/62 and affirmed
its 2002 adoption of these actions.
Amendment 62 to the BSAI FMP would
revise the CVOA descriptions to make
the FMP consistent with current federal
regulations at § 679.22(a)(5). The CVOA
is an area in which AFA catcher/
processors are prohibited from directed
fishing for pollock during the non-roe,
or B, season unless they are
participating in the Community
Development Quota fishery. The current
description at Section 3.5.2.1.6 of the
BSAI FMP would be changed to use the
more comprehensive term ‘‘non-roe
season’’ instead of the term ‘‘pollock B
season,’’ and the coordinates that define
the CVOA would be added to the
description.
E:\FR\FM\02APP1.SGM
02APP1
Agencies
[Federal Register Volume 74, Number 62 (Thursday, April 2, 2009)]
[Proposed Rules]
[Pages 14941-14950]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-7300]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Parts 51 and 59
[EPA-HQ-OAR-2006-0971; FRL-8788-4]
RIN 2060-AP33
National Volatile Organic Compound Emission Standards for Aerosol
Coatings
AGENCY: Environmental Protection Agency (EPA).
ACTION: Proposed rule.
-----------------------------------------------------------------------
SUMMARY: EPA is proposing to amend the National Volatile Organic
Compound Emission Standards for Aerosol Coatings (aerosol coatings
reactivity rule), which establishes national reactivity-based emission
standards for the aerosol coatings category (aerosol spray paints)
under section 183(e) of the Clean Air Act. This proposed action amends
Table 2A of the aerosol coatings reactivity rule by adding compounds
and associated reactivity factors based on petitions we received; and
by clarifying which volatile organic compounds are to be quantified in
compliance determinations. Additionally, we are proposing certain
changes related to the notice required for a company to certify that it
will assume the responsibility for compliance with record keeping and
reporting requirements for a regulated entity, and taking comment on
whether to change who is liable following such certification. Finally,
this action proposes minor revisions and corrections to the aerosol
coatings reactivity rule.
DATES: Comments must be received on or before May 4, 2009, unless a
public hearing is requested by April 13, 2009. If a hearing is
requested on the proposed rule, written comments must be received by
May 18, 2009.
Public Hearing. If anyone contacts EPA requesting to speak at a
public hearing concerning the proposed regulation by April 13, 2009, a
public hearing will be held on or about April 17, 2009.
ADDRESSES: Submit your comments, identified by Docket ID No. EPA-HQ-
OAR-2006-0971, by one of the following methods:
[[Page 14942]]
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments.
E-mail: a-and-r-docket@epa.gov.
Fax: (202) 566-1741.
Mail: Air and Radiation Docket, Environmental Protection
Agency, Mailcode 6102T, 1200 Pennsylvania Avenue, NW., Washington, DC
20460. Please include a total of two copies. We request that a separate
copy also be sent to the contact person identified below (see FOR
FURTHER INFORMATION CONTACT). In addition, please mail a copy of your
comments on the information collection provisions to the Office of
Information and Regulatory Affairs, Office of Management and Budget
(OMB), Attn: Desk Officer for EPA, 725 17 St., NW., Washington, DC
20503.
Hand Delivery: EPA Docket Center, Public Reading Room, EPA
West, Room 3334, 1301 Constitution Ave., NW., Washington, DC 20460.
Such deliveries are only accepted during the Docket's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: Direct your comments to the applicable docket. EPA's
policy is that all comments received will be included in the public
docket without change and may be made available online at https://www.regulations.gov, including any personal information provided,
unless the comment includes information claimed to be confidential
business information (CBI) or other information whose disclosure is
restricted by statute. Do not submit information that you consider to
be CBI or otherwise protected through www.regulations.gov or e-mail.
The www.regulations.gov Web site is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through www.regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the public docket and made available
on the Internet. If you submit an electronic comment, EPA recommends
that you include your name and other contact information in the body of
your comment and with any disk or CD-ROM you submit. If EPA cannot read
your comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Public Hearing. If a public hearing is held, it will be held at 10
a.m. at Building C on the EPA campus in Research Triangle Park, NC, or
at an alternate site nearby. Persons interested in presenting oral
testimony must contact Ms. Joan C. Rogers, U.S. EPA, Office of Air
Quality Planning and Standards, Sector Policies and Programs Division,
Natural Resources and Commerce Group (E143-03), Research Triangle Park,
North Carolina 27711, telephone number: (919) 541-4487, fax number
(919) 541-3470, e-mail address: rogers.joanc@epa.gov, no later than
April 13, 2009. Persons interested in attending the public hearing must
also call Ms. Rogers to verify the time, date and location of the
hearing. If no one contacts Ms. Rogers by April 13, 2009 with a request
to present oral testimony at the hearing, we will cancel the hearing.
Docket: All documents in the docket are listed in the
www.regulations.gov index. Although listed in the index, some
information is not publicly available, e.g., CBI or other information
whose disclosure is restricted by statute. Certain other material, such
as copyrighted material, is not placed on the Internet and will be
publicly available only in hard copy form. Publicly available docket
materials are available either electronically through
www.regulations.gov or in hard copy at the EPA Docket Center, Public
Reading Room, EPA West, Room 3334, 1301 Constitution Ave., NW.,
Washington, DC 20460. The Public Reading Room is open from 8:30 a.m. to
4:30 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the Public Reading Room is (202) 566-1742, and the
telephone number for the Air Docket is (202) 566-1744.
FOR FURTHER INFORMATION CONTACT: For information concerning the aerosol
coatings reactivity rule, contact Ms. J. Kaye Whitfield, U.S. EPA,
Office of Air Quality Planning and Standards, Sector Policies and
Programs Division, Natural Resources and Commerce Group (E143-03),
Research Triangle Park, North Carolina 27711, telephone number: (919)
541-2509, fax number (919) 541-3470, e-mail address:
whitfield.kaye@epa.gov. For information concerning the Clean Air Act
(CAA) section 183(e) consumer and commercial products program, contact
Mr. Bruce Moore, U.S. EPA, Office of Air Quality Planning and
Standards, Sector Policies and Programs Division, Natural Resources and
Commerce Group (E143-03), Research Triangle Park, North Carolina 27711,
telephone number: (919) 541-5460, fax number (919) 541-3470, e-mail
address: moore.bruce@epa.gov.
SUPPLEMENTARY INFORMATION: Entities Potentially Affected by This
Action. The entities potentially affected by this regulation encompass
all steps in aerosol coatings operations. This includes manufacturers,
processors, wholesale distributors and retailers who fall within the
regulatory definition of ``distributor,'' importers of aerosol coatings
for sale or distribution in the United States, and manufacturers,
processors, wholesale distributors, and importers who supply the
entities listed above with aerosol coatings for sale or distribution in
interstate commerce in the United States. The entities potentially
affected by this action include:
------------------------------------------------------------------------
NAICS Examples of regulated
Category code a entities
------------------------------------------------------------------------
Paint and Coating Manufacturing... 32551 Manufacturing of
lacquers, varnishes,
enamels, epoxy coatings,
oil and alkyd vehicle,
plastisols,
polyurethane, primers,
shellacs, stains, water
repellant coatings.
All Other Miscellaneous Chemical 325998 Aerosol can filling,
Production and Preparation aerosol packaging
Manufacturing. services.
------------------------------------------------------------------------
\a\ North American Industry Classification System https://www.census.gov/epcd/www/naics.html.
This table is not intended to be exhaustive, but rather provides a
guide for readers regarding entities likely to be affected by this
action. To determine whether you would be affected by this action, you
should examine the applicable industry description in section I.E of
the promulgation preamble, published at 73 FR 15604 (March 24, 2008).
If you have any questions regarding the applicability of this action to
a particular entity, consult
[[Page 14943]]
the appropriate EPA contact listed in the FOR FURTHER INFORMATION
CONTACT section of this notice.
Preparation of Comments. Do not submit information containing CBI
to EPA through www.regulations.gov or e-mail. Send or deliver
information identified as CBI only to the following address: Mr.
Roberto Morales, OAQPS Document Control Officer (C404-02), U.S. EPA,
Office of Air Quality Planning and Standards, Research Triangle Park,
North Carolina 27711, Attention: Docket ID EPA-HQ-OAR-2006-0971.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark
the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
World Wide Web (WWW). In addition to being available in the docket,
an electronic copy of this proposed action will also be available on
the WWW through the Technology Transfer Network (TTN). Following
signature, a copy of the proposed action will be posted on the TTN's
policy and guidance page for newly proposed or promulgated rules at the
following address: https://www.epa.gov/ttn/oarpg/. The TTN provides
information and technology exchange in various areas of air pollution
control.
Organization of This Document. The information presented in this
action is organized as follows:
I. Background
II. Summary of Proposed Amendments to the National Volatile Organic
Compound Emission Standards for Aerosol Coatings
A. Amendments to Tables 2A, 2B, and 2C--Reactivity Factors
B. Clarification to part 59, subpart E
C. The Certification Process for the Assumption of Recordkeeping
and Reporting Obligations
D. Comments Sought on Change in Liability following
Certification under Sec. 59.511(g)
E. Other Revisions
III. Statutory and Executive Order Reviews
A. Executive Order 12866: Regulatory Planning and Review
B. Paperwork Reduction Act
C. Regulatory Flexibility Act
D. Unfunded Mandates Reform Act
E. Executive Order 13132: Federalism
F. Executive Order 13175: Consultation and Coordination With
Indian Tribal Governments
G. Executive Order 13045: Protection of Children From
Environmental Health and Safety Risks
H. Executive Order 13211: Actions Concerning Regulations That
Significantly Affect Energy Supply, Distribution, or Use
I. National Technology Transfer and Advancement Act
J. Executive Order 12898: Federal Actions To Address
Environmental Justice in Minority Populations and Low- Income
Populations
I. Background
On March 24, 2008, EPA published national emission standards for
aerosol spray paints under section 183(e) of the CAA (73 FR 15604, and
codified in the Code of Federal Regulations at 40 CFR part 59, subpart
E (sections 59.500-59.516)). Section 183(e) of the CAA requires the
control of volatile organic compounds (VOC) emissions from certain
categories of consumer and commercial products for purposes of reducing
VOC emissions contributing to ozone formation and nonattainment of the
ozone national ambient air quality standards. States have previously
promulgated rules for aerosol spray paints based upon reductions of VOC
by mass; however, EPA concluded that a national rule based upon the
relative reactivity approach achieves more reduction in ozone formation
than may be achieved by a mass-based approach for this specific product
category. The regulation revised EPA's regulatory definition of VOC, to
include certain compounds that would otherwise be exempt, in order to
account for all reactive compounds in aerosol coatings that contribute
to ozone formation. Therefore, certain compounds that would not be VOC
under the otherwise applicable definition count towards the applicable
reactivity limits under the regulation.
Originally, the compliance date for the action, as established in
the rule (73 FR 15604), was January 1, 2009. Regulated entities were
required to submit initial notification reports 90 days in advance of
the compliance date; in this case, initial notification reports were
due on October 1, 2008.
Subsequently, on December 24, 2008, EPA published amendments (73 FR
78994) to the rule to move the applicability and initial compliance
dates for aerosol coatings from January 1, 2009, to July 1, 2009, and
make initial notification reports due on the compliance date, as
opposed to 90 days in advance of the compliance date. These changes
were necessary to (1) allow EPA time to conduct this rulemaking, and
add compounds (and their associated reactivity factors) that are
currently used in aerosol coatings, but were not included in Tables 2A,
2B, or 2C; and (2) allow regulated entities sufficient time to develop
initial notification reports based on the revised tables. Making
initial notification reports due on the compliance date results in the
aerosol coatings reactivity rule being more consistent with the
requirements of other 40 CFR part 59 rules, thereby increasing clarity
and avoiding confusion on the part of regulated entities.
The rule (73 FR 15604) also has a provision in Sec. 59.511(j) that
allows regulated entities to petition EPA to add compounds to Tables
2A, 2B, and 2C--Reactivity Factors of subpart E, 40 CFR part 59, which
is one of the subjects of this action.
II. Summary of Proposed Amendments to the National Volatile Organic
Compound Emission Standards for Aerosol Coatings
EPA is proposing to amend the aerosol coatings reactivity rule (73
FR 15604) by (1) revising Table 2A by adding compounds and associated
reactivity factors based on petitions we received; (2) clarifying which
VOC are to be quantified in compliance determinations in 40 CFR part
59, subpart E; (3) proposing certain changes related to the notice
required for a company to certify that it will assume the
responsibility for compliance with record keeping and reporting
requirements for a regulated entity; (4) taking comment on whether to
change who is liable following such certification; and (5) proposing
certain minor revisions and corrections.
A. Amendments to Tables 2A, 2B, and 2C--Reactivity Factors
Section 59.511(j) of the rule (73 FR 15604) allows regulated
entities to petition EPA to add compounds to Tables 2A, 2B, and 2C. For
each compound, the petition must include the chemical name, Chemical
Abstract Service (CAS) number, a statement certifying the intent to use
the compound in an aerosol coatings product, and adequate information
for EPA to evaluate the reactivity of the compound and assign a
reactivity factor consistent with the values for the other compounds
currently on the tables. Through this action, we are proposing to add
128 compounds to Table 2A in response to the petitions we received from
the regulated entities.
Tables 2A, 2B, and 2C list compounds and associated reactivity
factors known
[[Page 14944]]
to be used in aerosol coatings, and currently include 45 individual
compounds, 20 aliphatic hydrocarbon solvent mixtures, and four aromatic
hydrocarbon solvent mixtures. Three regulated entities and one trade
association that obtained certifications on behalf of its member
regulated entities petitioned EPA requesting an additional 168
compounds or mixtures be added to Table 2A. Of the 168 compounds or
mixtures identified by petitioners, we have added reactivity factors
for 122 compounds identified by the petitioners and six compounds
similar to those identified by the petitioners. Twenty-nine compounds
or mixtures identified by the petitioners were already listed or
addressed in Table 2A, 2B, or 2C; six were treated as duplicates; and
five were rejected because no information was provided to determine a
reactivity factor.
Further information is provided in the docket that describes each
of the compounds or mixtures that were identified in the petitions and
how each compound or mixture is being addressed in this proposal. As
indicated previously in section I of this preamble, the applicability,
initial compliance date and initial notification for aerosol coatings
were moved from January 1, 2009, to July 1, 2009 (73 FR 78994) due to
the large number of compounds that we received petitions for and the
necessary review.
B. Clarification to Part 59, Subpart E
In the aerosol coatings reactivity rule (73 FR 15604), we amended
the regulatory definition of VOC in 40 CFR 51.100(s) for the purposes
of determining compliance with the regulation (as described in 40 CFR
part 59--National Volatile Organic Compound Emission Standards for
Consumer and Commercial Products) so that any organic compound in the
volatile portion of an aerosol coating is counted towards the product's
reactivity-based limit (i.e., ``Because even less reactive VOC
contribute to ozone formation, we are amending the regulatory
definition of VOC for purposes of this rule by adding 40 CFR
51.100(s)(7).'') In the text of Sec. 51.100(s)(7) adopted in the March
24, 2008 rule, it was not clear that the compounds listed in both
Sec. Sec. 51.100(s)(1) and 51.100(s)(5) were to be counted as VOC for
determining compliance with the aerosol coatings reactivity rule in 40
CFR part 59. In this action, we are proposing changes to the previously
amended definition of VOC in part 51 to clarify that compounds that are
excluded from the definition of VOC under both 40 CFR 51.100(s)(1) and
(s)(5) are to be counted as VOC for the purposes of determining
compliance with the aerosol coatings reactivity rule in 40 CFR part 59,
subpart E.
C. The Certification Process for the Assumption of Recordkeeping and
Reporting Obligations
As provided in Sec. Sec. 59.501(b)(4), 59.510(b) and 59.511(g), a
manufacturer, importer or distributor may choose to certify that it
will assume the responsibility of maintaining records and submitting
reports required under this subpart for a regulated entity. To assume
that responsibility, the entity making the certification submits a
document as described in Sec. 59.511(g). In this action, EPA is
proposing the following amendments to Sec. 59.511(g):
EPA is proposing to amend Sec. 59.511(g) to call the certification
document a ``notice'' rather than a ``report.'' EPA is proposing this
change because it believes that the word ``notice'' is a more accurate
word to describe the document.
EPA is seeking comment on options for a method to ensure that both
the certifying entity and the regulated entity have full knowledge of
what responsibilities are being assumed by the certifying entity. This
is important because the regulations permit the certifying entity to
assume ``any or all'' of the recordkeeping and reporting requirements
(see Sec. 59.501(b)(4)) and the Sec. 59.511(g) certifying document
must identify the ``specific requirements'' that are being assumed by
the certifying entity. One option is to revise 59.511(g)(4) to require
that both the regulated entity and the certifying entity sign the
document. Currently, the language in Sec. 59.511(g)(4) provides that
the document will be signed by ``the company'' without specifying
whether this refers to the certifying entity or the regulated entity.
Industry representatives have requested that EPA clarify that only the
certifying entity must sign the notice before the certifying entity can
assume the regulated entity's recordkeeping and reporting
responsibilities, explaining that requiring the certifying entity to
obtain the signature of the regulated entity would be burdensome. A
second option is to require the certifying entity to send the 59.511(g)
notice to the regulated entity at the same time as it sends it to EPA.
EPA seeks comments on these options in order to determine the
appropriate balance between (1) ensuring that both parties have full
knowledge of what responsibilities are being assumed by the certifying
entity, and (2) ensuring that the certification process is not
burdensome.
EPA is proposing to amend Sec. 59.511(g)(3) to provide a more
detailed description of what responsibilities are being assumed by the
certifying entity and other related information about the division of
responsibility between the certifying entity and regulated entity and
how the recordkeeping and reporting requirements will be met. EPA seeks
comments on what additional details should be provided and what
additional burdens this would impose.
EPA is proposing to add a provision to Sec. 59.511(g) (to be
numbered (g)(4)) requiring that the certifying document contain a
statement that the certifying entity understands that the failure to
fulfill the responsibilities that it is assuming may result in an
enforcement action against it.
In addition to these proposed amendments to Sec. 59.511(g), EPA is
proposing certain amendments to provisions related to the notices in
Sec. 59.511(g):
EPA is proposing to add the word ``distributors'' to Sec.
59.501(b)(4) to make clear that distributors as well as manufacturers
and importers can be a certifying entity. The language currently in
Sec. 59.501(b)(4) only refers to ``manufacturers and importers,''
while the language in Sec. 59.511(g) refers to ``manufacturers,
importers and distributors.'' This amendment will make these two
provisions consistent and avoid any confusion as to whether
distributors may be a certifying entity.
EPA is proposing to amend Sec. 59.510(b) to replace the phrase
``certifying manufacturer'' with ``certifying entity'' in order to make
clear that Sec. 59.510(b) applies to all certifying entities and not
just those certifying entities who are manufacturers.
EPA is also requesting comment on whether the 59.511(g) notice
should be a certain form or contain certain language to fulfill the
requirements of this section.
D. Comments Sought on Change in Liability following Certification Under
Sec. 59.511(g)
Currently, Sec. Sec. 59.501(b), 59.510(a), 59.511(a) provide that
a regulated entity is responsible for recordkeeping and reporting
requirements if no other entity (the ``certifying entity'') has
certified that it will assume the responsibility for such requirements
under the provisions in Sec. 59.511(g). EPA is seeking comment on
whether the regulations should provide that both the certifying entity
and the regulated entity are liable for the recordkeeping and reporting
requirements covered by a notice submitted under Sec. 59.511(g), such
that
[[Page 14945]]
both would be liable for the failure to keep records or submit reports
and for inaccurate records or reports.
E. Other Revisions
Finally, in this action, we will propose minor revisions and edits
to include corrections to EPA regional office addresses, and several
minor changes and corrections in Table 2A. Specifically, we deleted the
listing for Di (2-ethylhexyl phthalate) (CAS 117-81-7) for which there
is no applicable reactivity factor; eliminated a duplicate listing of
Butanol (CAS 71-36-3); and corrected the CAS number for Isobutane (CAS
75-28-5) and the reactivity factor for Ethylene Glycol Monobutyl Ether
[2-Butoxyethanol] (CAS 111-76-2). Given the multiple ways to name
individual organic compounds, we have sorted Table 2A according to CAS
number to make it easier for regulated entities to find a specific
chemical. Classes of compounds for which there is no specific CAS
number are listed at the end of the table.
III. Statutory and Executive Order Reviews
A. Executive Order 12866: Regulatory Planning and Review
Under Executive Order (EO) 12866 (58 FR 51735, October 4, 1993),
this action is a ``significant regulatory action,'' as it raises novel
legal or policy issues. Accordingly, EPA submitted this action to OMB
for review under EO 12866 and any changes made in response to OMB
recommendations have been documented in the docket for this action.
B. Paperwork Reduction Act
This action does not impose any new information collection burden;
it only proposes amendments and minor corrections to the aerosol
coatings reactivity rule by (1) adding compounds and associated
reactivity factors based on petitions we received; (2) clarifying which
volatile organic compounds are to be quantified in compliance
determinations; (3) proposing certain changes related to the notice
required for a company to certify that it will assume the
responsibility for compliance with record keeping and reporting
requirements for a regulated entity; and by (4) proposing certain minor
revisions and corrections.
However, the OMB has previously approved the information collection
requirements contained in the existing regulations, i.e., the National
Volatile Organic Compound Emission Standards for Aerosol Coatings, 40
CFR part 59, subpart E (73 FR 15604, March 24, 2008) under the
provisions of the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. and
has assigned OMB control number 2060-0617. The OMB control numbers for
EPA's regulations in 40 CFR are listed in 40 CFR part 9.
C. Regulatory Flexibility Act
The Regulatory Flexibility Act (RFA) generally requires an agency
to prepare a regulatory flexibility analysis of any rule subject to
notice and comment rulemaking requirements under the Administrative
Procedure Act or any other statute unless the agency certifies that the
rule will not have a significant economic impact on a substantial
number of small entities. Small entities include small businesses,
small organizations, and small governmental jurisdictions.
For purposes of assessing the impacts of this rule on small
entities, small entity is defined as: (1) A small business as defined
by the Small Business Administration's (SBA) regulations at 13 CFR
121.201; (2) a small governmental jurisdiction that is a government of
a city, county, town, school district or special district with a
population of less than 50,000; and (3) a small organization that is
any not-for-profit enterprise which is independently owned and operated
and is not dominant in its field.
After considering the economic impacts of this proposed rule on
small entities, I certify that this action will not have a significant
economic impact on a substantial number of small entities. This
proposed rule will not impose any new requirements on small entities.
We have determined that small businesses will not incur any adverse
impacts because EPA is taking this action to propose minor corrections
and amendments to the Aerosol Coatings final rule, and these
corrections and amendments do not create any new requirements or
burdens. No costs are associated with these amendments.
We continue to be interested in the potential impacts of the
proposed rule on small entities and welcome comments on issues related
to such impacts.
D. Unfunded Mandates Reform Act
This proposed rule does not contain a Federal mandate that may
result in expenditures of $100 million or more for State, local, and
tribal governments, in the aggregate, or the private sector in any one
year. This action only proposes amendments and minor corrections to the
aerosol coatings reactivity rule by (1) adding compounds and associated
reactivity factors based on petitions we received; (2) clarifying which
volatile organic compounds are to be quantified in compliance
determinations; (3) proposing certain changes related to the notice
required for a company to certify that it will assume the
responsibility for compliance with record keeping and reporting
requirements for a regulated entity; and (4) proposing certain minor
revisions and corrections. Thus, this rule is not subject to the
requirements of sections 202 or 205 of the Unfunded Mandates Reform Act
(UMRA).
This proposed rule is also not subject to the requirements of
section 203 of UMRA because it contains no regulatory requirements that
might significantly or uniquely affect small governments.
E. Executive Order 13132: Federalism
EO 13132, entitled ``Federalism'' (64 FR 43255, August 10, 1999),
requires EPA to develop an accountable process to ensure ``meaningful
and timely input by state and local officials in the development of
regulatory policies that have federalism implications.'' ``Policies
that have federalism implications'' is defined in the EO to include
regulations that have ``substantial direct effects on the states, on
the relationship between the national government and the states, or on
the distribution of power and responsibilities among the various levels
of government.''
This proposed rule does not have federalism implications. It will
not have substantial direct effects on the states, on the relationship
between the national government and the states, or on the distribution
of power and responsibilities among the various levels of government,
as specified in EO 13132. This action only proposes amendments and
minor corrections to the aerosol coatings reactivity rule by (1) adding
compounds and associated reactivity factors based on petitions we
received; (2) clarifying which volatile organic compounds are to be
quantified in compliance determinations; (3) proposing certain changes
related to the notice required for a company to certify that it will
assume the responsibility for compliance with record keeping and
reporting requirements for a regulated entity; and (4) proposing
certain minor revisions and corrections. Thus, EO 13132 does not apply
to this rule.
In the spirit of EO 13132, and consistent with EPA policy to
promote communications between EPA and state and local governments, EPA
specifically solicits comment on this proposed rule from state and
local officials.
[[Page 14946]]
F. Executive Order 13175: Consultation and Coordination With Indian
Tribal Governments
This action does not have tribal implications, as specified in EO
13175 (65 FR 67249, November 9, 2000.) This action will not impose any
new obligations or enforceable duties on tribal governments.
EPA specifically solicits additional comment on this proposed
action from tribal officials.
G. Executive Order 13045: Protection of Children From Environmental
Health and Safety Risks
EPA interprets EO 13045 (62 FR 19885, April 23, 1997) as applying
only to those regulatory actions that concern health or safety risks,
such that the analysis required under section 5-501 of the EO has the
potential to influence the regulation. This action is not subject to EO
13045 because it does not establish an environmental standard intended
to mitigate health or safety risks.
H. Executive Order 13211: Actions Concerning Regulations That
Significantly Affect Energy Supply, Distribution, or Use
This action is not a ``significant energy action'' as defined in EO
13211 (66 FR 28355 (May 22, 2001)), because it is not likely to have a
significant adverse effect on the supply, distribution, or use of
energy. Further, we have concluded that this rule is not likely to have
any adverse energy effects because EPA is taking this action to propose
minor corrections and amendments to the Aerosol Coatings final rule,
and these corrections and amendments do not create any new
requirements.
I. National Technology Transfer and Advancement Act
Section 12(d) of the National Technology Transfer and Advancement
Act of 1995 (``NTTAA''), Public Law No. 104-113, 12(d) (15 U.S.C. 272
note) directs EPA to use voluntary consensus standards in its
regulatory activities unless to do so would be inconsistent with
applicable law or otherwise impractical. Voluntary consensus standards
are technical standards (e.g., materials specifications, test methods,
sampling procedures, and business practices) that are developed or
adopted by voluntary consensus standards bodies. NTTAA directs EPA to
provide Congress, through OMB, explanations when the Agency decides not
to use available and applicable voluntary consensus standards.
This proposed rulemaking does not involve technical standards.
Therefore, EPA is not considering the use of any voluntary consensus
standards.
J. Executive Order 12898: Federal Actions To Address Environmental
Justice in Minority Populations and Low-Income Populations
EO 12898 (59 FR 7629 (Feb. 16, 1994)) establishes federal executive
policy on environmental justice. Its main provision directs federal
agencies, to the greatest extent practicable and permitted by law, to
make environmental justice part of their mission by identifying and
addressing, as appropriate, disproportionately high and adverse human
health or environmental effects of their programs, policies, and
activities on minority populations and low-income populations in the
United States.
EPA has concluded that it is not practicable to determine whether
there would be disproportionately high and adverse human health or
environmental effects on minority and/or low income populations from
this proposed rule. The proposed rule only makes amendments and minor
corrections to the aerosol coatings reactivity rule by (1) adding
compounds and associated reactivity factors based on petitions we
received; (2) clarifying which volatile organic compounds are to be
quantified in compliance determinations; (3) proposing certain changes
related to the notice required for a company to certify that it will
assume the responsibility for compliance with record keeping and
reporting requirements for a regulated entity; and by (4) proposing
certain minor revisions and corrections.
List of Subjects
40 CFR Part 51
Environmental protection, Administrative practice and procedure,
Air pollution control, Carbon monoxide, Intergovernmental relations,
Lead, Nitrogen dioxide, Ozone, Particulate matter, Reporting and
recordkeeping requirements, Sulfur oxides, Volatile organic compound,
Consumer products, Aerosol products, Aerosol coatings, Consumer and
commercial products.
40 CFR Part 59
Environmental protection, Administrative practice and procedure,
Air pollution control, Incorporation by reference, Intergovernmental
relations, Reporting and recordkeeping requirements.
Dated: March 25, 2009.
Lisa P. Jackson,
Administrator.
For the reasons set out in the preamble, parts 51 and 59 of title
40, Chapter I of the Code of Federal Regulations are proposed to be
amended as follows:
PART 51--[AMENDED]
1. The authority citation for part 51 continues to read as follows:
Authority: 23 U.S.C. 101; 42 U.S.C 7401-7671q.
2. Section 51.100(s)(7) is revised to read as follows:
Sec. 51.100 Definitions.
* * * * *
(s) * * *
(7) For the purposes of determining compliance with EPA's aerosol
coatings reactivity based regulation (as described in 40 CFR part 59--
National Volatile Organic Compound Emission Standards for Consumer and
Commercial Products) any organic compound in the volatile portion of an
aerosol coating is counted towards the product's reactivity-based
limit, as provided in 40 CFR part 59, subpart E. Therefore, the
compounds that are used in aerosol coating products and that are
identified in paragraphs (s)(1) or (s)(5) of this section as excluded
from EPA's definition of VOC are to be counted towards a product's
reactivity limit for the purposes of determining compliance with EPA's
aerosol coatings reactivity-based national regulation, as provided in
40 CFR part 59, subpart E.
* * * * *
PART 59--[AMENDED]
3. The authority citation for part 59 continues to read as follows:
Authority: 42 U.S.C 7414 and 7511b(e).
4. Section 59.501 is amended by revising paragraph (b)(4) to read
as follows:
Sec. 59.501 Am I subject to this subpart?
* * * * *
(b) * * *
(4) If you are a manufacturer, importer, or distributor, you can
choose to certify that you will provide any or all of the recordkeeping
and reporting requirements of Sec. Sec. 59.510 and 59.511 by following
the procedures of Sec. Sec. 59.511(g) and 59.511(h).
* * * * *
5. Section 59.510(b) is amended by revising paragraph (b) to read
as follows:
Sec. 59.510 What records am I required to maintain?
* * * * *
(b) By providing the written certification to the Administrator in
accordance with Sec. 59.511(g), the certifying entity accepts
responsibility
[[Page 14947]]
for compliance with the recordkeeping requirements of this section with
respect to any products covered by the written certification, as
detailed in the written certification. Failure to maintain the required
records may result in enforcement action by EPA against the certifying
entity in accordance with the enforcement provisions applicable to
violation of these provisions by regulated entities. If the certifying
entity revokes its certification, as allowed by Sec. 59.511(h), the
regulated entity must assume responsibility for maintaining all records
required by this section.
6. Section 59.511 is amended by revising paragraphs (g)
introductory text, (g)(3), and (g)(4), to read as follows:
Sec. 59.511 What notifications and reports must I submit?
* * * * *
(g) If you are a manufacturer, importer, or distributor who chooses
to certify that you will maintain records for a regulated entity for
all or part of the purposes of Sec. 59.510 and this section, you must
submit a notice to the appropriate Regional Office listed in Sec.
59.512. This notice must include the information contained in
paragraphs (g)(1) through (g)(4) of this section.
* * * * *
(3) Description of specific requirements in Sec. 59.510 and this
section for which you are assuming responsibility and explanation of
how all required information under this subpart will be maintained and
submitted, as required, by you or the regulated entity; including
identification of the products covered by the notice and the location
or locations where the records will be maintained; and
(4) A statement that the certifying entity understands that the
failure to fulfill the responsibilities that it is assuming may result
in an enforcement action in accordance with the enforcement provisions
applicable to violation of these provisions by regulated entities.
* * * * *
7. Section 59.512 is amended to revise the addresses for Regions I,
IV, VII, and VIII to read as follows:
Sec. 59.512 Addresses of EPA regional offices.
* * * * *
EPA Region I (Connecticut, Maine, Massachusetts, New Hampshire, Rhode
Island, Vermont), Director, Office of Environmental Stewardship, 1
Congress St., Suite 1100, Boston, MA 02114-2023.
* * * * *
EPA Region IV (Alabama, Florida, Georgia, Kentucky, Mississippi, North
Carolina, South Carolina, Tennessee) Director, Air Pesticides and
Toxics, Management Division, Atlanta Federal Center, 61 Forsyth Street,
SW., Atlanta, GA 30303-3104.
* * * * *
EPA Region VII (Iowa, Kansas, Missouri, Nebraska) Director, Air Toxics
Division, 901 North 5th Street, Kansas City, KS 66101.
EPA Region VIII (Colorado, Montana, North Dakota, South Dakota, Utah,
Wyoming) Director, Air and Toxics Division, 1595 Wynkoop Street,
Denver, CO 80202-1129.
* * * * *
8. Table 2A to subpart E of part 59--Reactivity Factors is revised
to read as follows:
Table 2A to Subpart E of Part 59--Reactivity Factors
------------------------------------------------------------------------
Reactivity
Compound CAS No. factor
------------------------------------------------------------------------
Formaldehyde.............................. 50-00-0 8.97
Glycerol (1,2,3-Propanetriol)............. 56-81-5 3.27
Propylene Glycol.......................... 57-55-6 2.75
Ethanol................................... 64-17-5 1.69
Formic Acid............................... 64-18-6 0.08
Acetic Acid............................... 64-19-7 0.71
Methanol.................................. 67-56-1 0.71
Isopropyl Alcohol (2-Propanol)............ 67-63-0 0.71
Acetone (Propanone)....................... 67-64-1 0.43
n-Propanol (n-Propyl Alcohol)............. 71-23-8 2.74
n-Butyl Alcohol (Butanol)................. 71-36-3 3.34
n-Pentanol (Amyl Alcohol)................. 71-41-0 3.35
Benzene................................... 71-43-2 0.81
1,1,1-Trichloroethane..................... 71-55-6 0.00
Propane................................... 74-98-6 0.56
Vinyl Chloride............................ 75-01-4 2.92
Acetaldehyde.............................. 75-07-0 6.84
Methylene Chloride (Dichloromethane)...... 75-09-2 0.07
Ethylene Oxide............................ 75-21-8 0.05
Isobutane................................. 75-28-5 1.35
HFC-152A (1,1-Difluoroethane)............. 75-37-6 0.00
Propylene Oxide........................... 75-56-9 0.32
t-Butyl Alcohol........................... 75-65-0 0.45
Methyl t-Butyl Ketone..................... 75-97-8 0.78
Isophorone (3,5,5-Trimethyl-2- 78-59-1 10.58
Cyclohexenone)...........................
Isopentane................................ 78-78-4 1.68
Isobutanol................................ 78-83-1 2.24
2-Butanol (s-Butyl Alcohol)............... 78-92-2 1.60
Methyl Ethyl Ketone (2-Butanone).......... 78-93-3 1.49
Monoisopropanol Amine (1-Amino-2-Propanol) 78-96-6 13.42
Trichloroethylene......................... 79-01-6 0.60
Propionic Acid............................ 79-09-4 1.16
Acrylic Acid.............................. 79-10-7 11.66
Methyl Acetate............................ 79-20-9 0.07
Nitroethane............................... 79-24-3 12.79
Methacrylic Acid.......................... 79-41-4 18.78
[[Page 14948]]
a-Pinene (Pine Oil)....................... 80-56-8 4.29
Methyl Methacrylate....................... 80-62-6 15.84
Naphthalene............................... 91-20-3 3.26
Xylene, ortho-............................ 95-47-6 7.49
o-Cresol.................................. 95-48-7 2.34
1,2,4-Trimethylbenzene.................... 95-63-6 7.18
3-Pentanone............................... 96-22-0 1.45
Methyl Ethyl Ketoxime (Ethyl Methyl Ketone 96-29-7 22.04
Oxime)...................................
Gamma-Butyrolactone....................... 96-48-0 1.15
Ethyl Lactate............................. 97-64-3 2.71
Isobutyl Isobutyrate...................... 97-85-8 0.61
Isobutyl Methacrylate..................... 97-86-9 8.99
Butyl Methacrylate........................ 97-88-1 9.09
PCBTF (p-Trifluoromethyl-Cl-Benzene)...... 98-56-6 0.11
Cumene (Isopropyl Benzene)................ 98-82-8 2.32
a-Methyl Styrene.......................... 98-83-9 1.72
Ethyl Benzene............................. 100-41-4 2.79
Styrene................................... 100-42-5 1.95
Benzaldehyde.............................. 100-52-7 0.00
Triethanolamine........................... 102-71-6 2.76
2-Ethyl-Hexyl Acetate..................... 103-09-3 0.79
2-Ethyl-Hexyl Acrylate.................... 103-11-7 2.42
2-Ethyl-1-Hexanol (Ethyl Hexyl Alcohol)... 104-76-7 2.20
Ethyl Propionate.......................... 105-37-3 0.79
s-Butyl Acetate........................... 105-46-4 1.43
n-Propyl Propionate....................... 106-36-5 0.93
Xylene, para-............................. 106-42-3 4.25
p-Dichlorobenzene......................... 106-46-7 0.20
Dimethyl Succinate........................ 106-65-0 0.23
1,2-Epoxybutane (Ethyl Oxirane)........... 106-88-7 1.02
n-Propyl Bromide.......................... 106-94-5 0.35
Butane.................................... 106-97-8 1.33
1,3-Butadiene............................. 106-99-0 13.58
Ethylene Glycol........................... 107-21-1 3.36
2-Methyl-2,4-Pentanediol.................. 107-41-5 1.04
Isohexane Isomers......................... 107-83-5 1.80
Methyl n-Propyl Ketone (2-Pentanone)...... 107-87-9 3.07
Propylene Glycol Monmethyl Ether (1- 107-98-2 2.62
Methoxy-2-Propanol)......................
n,n-Dimethylethanolamine.................. 108-01-0 4.76
1-Nitropropane............................ 108-03-2 16.16
Vinyl Acetate............................. 108-05-4 3.26
Methyl Isobutyl Ketone.................... 108-10-1 4.31
Isopropyl Acetate......................... 108-21-4 1.12
Propylene Carbonate (4-Methyl-1,3-Dioxolan- 108-32-7 0.25
2one)....................................
Xylene, meta-............................. 108-38-3 10.61
Propylene Glycol Monomethyl Ether Acetate 108-65-6 1.71
(1-Methoxy-2-Propyl Acetate).............
1,3,5-Trimethyl Benzene................... 108-67-8 11.22
Di-Isobutyl Ketone (2,6-Dimethyl-4- 108-83-8 2.94
Heptanone)...............................
Methylcyclohexane......................... 108-87-2 1.99
Toluene................................... 108-88-3 3.97
Monochlorobenzene......................... 108-90-7 0.36
Cyclohexanol.............................. 108-93-0 2.25
Cyclohexanone............................. 108-94-1 1.61
n-Butyl Butyrate.......................... 109-21-7 1.12
Propyl Acetate............................ 109-60-4 0.87
Pentane................................... 109-66-0 1.54
Ethylene Glycol Monomethyl Ether (2- 109-86-4 2.98
Methoxyethanol)..........................
Tetrahydrofuran........................... 109-99-9 4.95
Methyl Isoamyl Ketone (5-Methyl-2- 110-12-3 2.10
Hexanone)................................
Isobutyl Acetate.......................... 110-19-0 0.67
Methyl Amyl Ketone........................ 110-43-0 2.80
Hexane.................................... 110-54-3 1.45
n-Propyl Formate.......................... 110-74-7 0.93
2-Ethoxyethanol........................... 110-80-5 3.78
Cyclohexane............................... 110-82-7 1.46
Morpholine................................ 110-91-8 15.43
Dipropylene Glycol........................ 110-98-5 2.48
Ethylene Glycol Monoethyl Ether Acetate (2- 111-15-9 1.90
Ethoxyethyl Acetate).....................
Diethylenetriamine........................ 111-40-0 13.03
Diethanolamine............................ 111-42-2 4.05
Diethylene Glycol......................... 111-46-6 3.55
[[Page 14949]]
n-Octane.................................. 111-65-9 1.11
2-Butoxy-1-Ethanol (Ethylene Glycol 111-76-2 2.90
Monobutyl Ether).........................
Diethylene Glycol Methyl Ether (2-(2- 111-77-3 2.90
Methoxyethoxy) Ethanol)..................
n-Nonane.................................. 111-84-2 0.95
2-(2-Ethoxyethoxy) Ethanol................ 111-90-0 3.19
Ethylene Glycol Monobutyl Ether Acetate (2- 112-07-2 1.67
Butoxyethyl Acetate).....................
2-(2-Ethoxyethoxy) Ethyl Acetate.......... 112-15-2 1.50
2-(2-Butoxyethoxy)-Ethanol................ 112-34-5 2.70
Dimethyl Ether............................ 115-10-6 0.93
Triethylamine............................. 121-44-8 16.60
2-Phenoxyethanol; Ethylene Glycol Phenyl 122-99-6 3.61
Ether....................................
Diacetone Alcohol......................... 123-42-2 0.68
2,4-Pentanedione.......................... 123-54-6 1.02
Butanal................................... 123-72-8 6.74
Butyl Acetate, n.......................... 123-86-4 0.89
2-(2-Butoxyethoxy) Ethyl Acetate.......... 124-17-4 1.38
2-Amino-2-Methyl-1-Propanol............... 124-68-5 15.08
Perchloroethylene......................... 127-18-4 0.04
Ethanolamine.............................. 141-43-5 5.97
Ethyl acetate............................. 141-78-6 0.64
Heptane................................... 142-82-5 1.28
n-Hexyl Acetate (Hexyl Acetate)........... 142-92-7 0.87
2-Ethyl Hexanoic Acid..................... 149-57-5 4.41
1,2,3-Trimethyl Benzene................... 526-73-8 11.26
t-Butyl Acetate........................... 540-88-5 0.20
Methyl Isobutyrate........................ 547-63-7 0.70
Methyl Lactate............................ 547-64-8 2.75
Methyl Propionate......................... 554-12-1 0.71
1,2 Butanediol............................ 584-03-2 2.21
n-Butyl Propionate........................ 590-01-2 0.89
Methyl n-Butyl Ketone (2-Hexanone)........ 591-78-6 3.55
Ethyl Isopropyl Ether..................... 625-54-7 3.86
Dimethyl Adipate.......................... 627-93-0 1.95
Methy n-Butyl Ether....................... 628-28-4 3.66
Amyl Acetate (Pentyl Ethanoate, Pentyl 628-63-7 0.96
Acetate).................................
Ethyl n-Butyl Ether....................... 628-81-9 3.86
Ethyl t-Butyl Ether....................... 637-92-3 2.11
1,3-Dioxolane............................. 646-06-0 5.47
Ethyl-3-Ethoxypropionate.................. 763-69-9 3.61
Methyl Pyrrolidone (n-Methyl-2- 872-50-4 2.56
Pyrrolidone).............................
Dimethyl Gluterate........................ 1119-40-0 0.51
Ethylene Glycol 2-Ethylhexyl Ether [2-(2- 1559-35-9 1.71
Ethylhexyloxy) Ethanol]..................
Propylene Glycol Monopropyl Ether (1- 1569-01-3 2.86
Propoxy-2-Propanol)......................
Propylene Glycol Monoethyl Ether (1-Ethoxy- 1569-02-4 3.25
2-Propanol)..............................
2-Methoxy-1-Propanol...................... 1589-47-5 3.01
Methyl t-Butyl Ether...................... 1634-04-4 0.78
Ethylcyclohexane.......................... 1678-91-7 1.75
Isoamyl Isobutyrate....................... 2050-01-3 0.89
2-Propoxyethanol (Ethylene Glycol 2807-30-9 3.52
Monopropyl Ether)........................
n-Butoxy-2-Propanol....................... 5131-66-8 2.70
d-Limonene (Dipentene or Orange Terpene).. 5989-27-5 3.99
Dipropylene Glycol Methyl Ether Isomer (2- 13588-28-8 3.02
[2-Methoxypropoxy]-1-Propanol)...........
Texanol (1,3 Pentanediol, 2,2,4-Trimethyl, 25265-77-4 0.89
1-Isobutyrate)...........................
Isodecyl Alcohol (8-Methyl-1-Nonanol)..... 25339-17-7 1.23
Tripropylene Glycol Monomethyl Ether...... 25498-49-1 1.90
Glycol Ether DPNB (1-(2-Butoxy-1- 29911-28-2 1.96
Methylethoxy) 2-Propanol)................
Propylene Glycol t-Butyl Ether (1-tert- 57018-52-7 1.71
Butoxy-2-Propanol).......................
2-Methoxy-1-Propyl Acetate................ 70657-70-4 1.12
Oxo-Heptyl Acetate........................ 90438-79-2 0.97
2-tert-Butoxy-1-Propanol.................. 94023-15-1 1.81
Oxo-Octyl Acetate......................... 108419-32-5 0.96
C8 Disubstituted Benzenes................. na 7.48
C9 Styrenes............................... na 1.72
------------------------------------------------------------------------
[FR Doc. E9-7300 Filed 4-1-09; 8:45 am]
BILLING CODE 6560-50-P