Airworthiness Directives; General Electric Company CF6-45 and CF6-50 Series Turbofan Engines, 8735-8737 [E9-3615]

Download as PDF 8735 Federal Register / Vol. 74, No. 37 / Thursday, February 26, 2009 / Rules and Regulations (1) The Director of the Federal Register approved the incorporation by reference of BAE Systems (Operations) Limited Service Bulletin J41–57–020, Revision 1, dated July 3, 2006; and BAE Systems (Operations) Limited Service Bulletin J41–57–021, Revision 4, dated January 16, 2003; in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. (2) On September 23, 1998 (63 FR 44371, August 19, 1998), the Director of the Federal Register approved the incorporation by reference of British Aerospace Regional Aircraft Service Bulletins identified in Table 3 of this AD. TABLE 3—MATERIAL PREVIOUSLY INCORPORATED BY REFERENCE Service bulletin Revision level Date J41–57–019 ......................................................................................................................................... J41–57–020 ......................................................................................................................................... J41–57–021 ......................................................................................................................................... 1 ............................... Original .................... Original .................... November 26, 1997. March 20, 1997. May 7, 1998. (3) For service information identified in this AD, contact BAE Systems Regional Aircraft, 13850 Mclearen Road, Herndon, Virginia 20171; telephone 703–736–1080; email raebusiness@baesystems.com; Internet https://www.baesystems.com/Businesses/ RegionalAircraft/index.htm. (4) You may review copies of the service information that is incorporated by reference at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425–227–1221 or 425–227–1152. (5) You may also review copies of the service information at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to https://www.archives.gov/federal_register/ code_of_federal_regulations/ ibr_locations.html. TABLE 4—ALL MATERIAL INCORPORATED BY REFERENCE Service bulletin BAE Systems (Operations) Limited Service Bulletin J41–57–020 BAE Systems (Operations) Limited Service Bulletin J41–57–021 British Aerospace Regional Aircraft Service Bulletin J41–57–019 British Aerospace Regional Aircraft Service Bulletin J41–57–020 British Aerospace Regional Aircraft Service Bulletin J41–57–021 Issued in Renton, Washington, on January 9, 2009. Stephen P. Boyd, Assistant Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9–3782 Filed 2–25–09; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2006–24145; Directorate Identifier 2006–NE–06–AD; Amendment 39– 15823; AD 2009–04–17] RIN 2120–AA64 Airworthiness Directives; General Electric Company CF6–45 and CF6–50 Series Turbofan Engines AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6–45 and CF6–50 series turbofan engines. This AD requires replacing certain forward and aft centerbodies of the long fixed core exhaust nozzle (LFCEN) assembly. VerDate Nov<24>2008 14:57 Feb 25, 2009 Jkt 217001 Revision level ..................................................... ..................................................... ..................................................... ..................................................... ..................................................... This AD results from the engine manufacturer issuing new service information. We are issuing this AD to prevent the forward and aft centerbody of the LFCEN assembly from separating due to high imbalance engine conditions, leading to damage to the airplane. DATES: This AD becomes effective April 2, 2009. The Director of the Federal Register approved the incorporation by reference of certain publications listed in the regulations as of April 2, 2009. ADDRESSES: You can get the service information identified in this AD from General Electric Company via GEAviation, Attn: Distributions, 111 Merchant St., Room 230, Cincinnati, Ohio 45246, telephone (513) 552–3272; fax (513) 552–3329. The Docket Operations office is located at the Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, SE., West Building Ground Floor, Room W12–140, Washington, DC 20590–0001. FOR FURTHER INFORMATION CONTACT: Robert Green, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803; e-mail: robert.green@faa.gov; telephone (781) 238–7754; fax (781) 238–7199. PO 00000 Frm 00033 Fmt 4700 Sfmt 4700 Date 1 ............................... 4 ............................... 1 ............................... Original .................... Original .................... July 3, 2006. January 16, 2003. November 26, 1997. March 20, 1997. May 7, 1998. The FAA proposed to amend 14 CFR part 39 with a proposed AD. The proposed AD applies to (GE) CF6–45 and CF6–50 series turbofan engines. We published the proposed AD in the Federal Register on January 2, 2008, (73 FR 77). That action proposed to require replacing the centerbodies with centerbodies that were modified using the Accomplishment Instructions, Section 3, of GE SB No. CF6–50 S/B 78–0244, dated July 30, 2007, within 42 months of the effective date of the proposed AD. SUPPLEMENTARY INFORMATION: Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov; or in person at the Docket Operations office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone (800) 647–5527) is provided in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. Comments We provided the public the opportunity to participate in the E:\FR\FM\26FER1.SGM 26FER1 8736 Federal Register / Vol. 74, No. 37 / Thursday, February 26, 2009 / Rules and Regulations development of this AD. We have considered the comments received. Requests To Allow Credit for Rework Performed Using GE Service Bulletin CF6–50 S/B 78–0242 Two commenters, Atlas Air and Evergreen International Airlines, asked us to allow credit for rework performed using GE Service Bulletin (SB) CF6–50 S/B 78–0242, dated September 26, 2005. The commenters state the original issue and later revision of GE SB CF6–50 S/ B 78–0244 state in Section 1, Planning Information, that forward and aft centerbody assemblies reworked in accordance with GE SB CF6–50 S/B 78– 0242, meet the requirement of the GE SB. We agree. The rework defined by GE SB CF6–50 S/B 78–0242 meets the requirements of GE SB CF6–50 S/B 78– 0244, Revision 1. Also, there might be forward and aft centerbody assemblies that have been reworked using the original issue of GE SB CF6–50 S/B 78– 0244, which is acceptable. We have added references to GE SB CF6–50 S/B 78–0244, dated July 30, 2007, and GE SB CF6–50 S/B 78–0242, dated September 26, 2005, to paragraph (f) of this AD. Request To Add GE SB CF6–50 S/B 78– 0244, Revision 1, Dated March 13, 2008 to the AD Compliance Section Two commenters, GE Aviation and Boeing Commercial Airplane Services, ask us to reference SB CF6–50 S/B 78– 0244, Revision 1, dated March 13, 2008, in the compliance section of the proposed AD. The commenters state that operators cannot get the rivets identified in Section 2. Material Information, paragraph A. (1) of the original issue of GE SB CF6–50 S/B 78– 0244. Those rivets are part numbers (P/Ns) NAS1398M3–2 and NAS 1398M3–3. GE identified alternative rivets P/Ns NAS13984–2 and NAS13984–3 in SB CF6–50 S/B 78– 0244, Revision 1, dated March 13, 2008. We agree. We have changed GE SB CF6–50 S/B 78–0244, dated July 30, 2007, to GE SB CF6–50 S/B 78–0244, Revision 1, dated March 13, 2008, in the regulatory text. Recommendation To Use Rivet P/N NAS9307 as an Alternative to P/Ns NAS13984–2 and NAS13984–3 One commenter, Nordam Prism, recommends we allow using alternative rivets, P/N NAS9307, for installing the forward centerbody forward doubler. The commenter suggests the P/N NAS9307 rivet is more reliable than the specified P/N NAS1398 rivet. The commenter states the P/N NAS9307 VerDate Nov<24>2008 14:57 Feb 25, 2009 Jkt 217001 rivet locking collar is designed as a positive security device that forms the rivet sleeve into the locking stem, thereby promoting joint integrity while in service. The commenter states the P/N NAS1398 rivet doesn’t offer this feature, and the lock has a tendency to release in service. The commenter further notes the P/N NAS9307 rivet design provides a more consistent installation with visual confirmation of an acceptable mechanical fit. Previous experience with P/N NAS1398 rivets would often result in inspectors not accepting rivet installation due to misplaced locking collars. The resulting removal increased the tendency for an oversized rivet hole. In this particular GE SB CF6–50 S/B 78–0244 application, there exists no tolerance for oversizing the hole and installing a larger rivet. The first article assembly effectively used the P/N NAS9307 rivet in this application. We don’t agree. GE states the P/N NAS9307 rivet doesn’t offer a 0.094inch diameter option that is consistent with the existing repair. The proposed P/N NAS9307M–4–0X rivet size (0.125inch diameter) would work in this configuration, but the repair area might not accommodate the next higher, P/N NAS9307M–5–0X rivet size (0.165-inch diameter), precluding oversized rivet holes or future repairs. GE further notes the spindle material of the P/N NAS9307 rivet might be made of PH15– 7 corrosion resistant steel. The P/N PH15–7 material doesn’t offer the same corrosion resistance in an exhaust environment as the A386 spindle material used in the P/N NAS1398 rivets. We didn’t change the Regulatory text. Request To Remove the KC–10A Airplane From the ‘‘Used on’’ Section of Paragraph (c) of the Proposed AD One commenter, Boeing Commercial Airplane Services, asks us to remove the reference to the KC–10A airplane from the ‘‘used on but not limited to’’ sentence in paragraph (c) of the proposed AD. Boeing states the KC–10A doesn’t use the LFCEN configuration. We agree. We supply the ‘‘used on, but not limited to’’ list of airplanes in paragraph (c) of the proposed AD to aid operators and users in identifying if their airplane might use the affected engines. Since the list is for information only, we are not expanding the scope of the proposed AD by adding or removing any airframe. We removed the KC–10A from the ‘‘installed on but not limited to’’ sentence in paragraph (c) of this AD. PO 00000 Frm 00034 Fmt 4700 Sfmt 4700 Conclusion We have carefully reviewed the available data, including the comments received, and determined that air safety and the public interest require adopting the AD with the changes described previously. We have determined that these changes will neither increase the economic burden on any operator nor increase the scope of the AD. Costs of Compliance We estimate that this AD will affect 379 GE CF6–45 and CF6–50 series turbofan engines installed on airplanes of U.S. registry. We also estimate that it will take about 44 work hours per engine to perform the actions, and that the average labor rate is $80 per work hour. Required parts would cost about $11,000 per engine. Based on these figures, we estimate the total cost of this AD to U.S. operators to be $2,802,360. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701, ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866; (2) Is not a ‘‘significant rule’’ under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities E:\FR\FM\26FER1.SGM 26FER1 Federal Register / Vol. 74, No. 37 / Thursday, February 26, 2009 / Rules and Regulations under the criteria of the Regulatory Flexibility Act. We prepared a summary of the costs to comply with this AD and placed it in the AD Docket. You may get a copy of this summary at the address listed under ADDRESSES. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Safety. Adoption of the Amendment Accordingly, under the authority delegated to me by the Administrator, the Federal Aviation Administration amends 14 CFR part 39 as follows: ■ PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: ■ 2009–04–17 General Electric Company: Amendment 39–15823. Docket No. FAA–2006–24145; Directorate Identifier 2006–NE–06–AD. Effective Date (a) This airworthiness directive (AD) becomes effective April 2, 2009. Alternative Methods of Compliance (g) The Manager, Engine Certification Office, has the authority to approve alternative methods of compliance for this AD if requested using the procedures found in 14 CFR 39.19. Related Information (h) Contact Robert Green, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803; e-mail: robert.green@faa.gov; telephone (781) 238–7754; fax (781) 238– 7199, for more information about this AD. Material Incorporated by Reference (i) None. Issued in Burlington, Massachusetts, on February 12, 2009. Francis A. Favara, Manager, Engine and Propeller Directorate, Aircraft Certification Service. [FR Doc. E9–3615 Filed 2–25–09; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Affected ADs (b) None. Federal Aviation Administration Applicability (c) This AD applies to General Electric Company (GE) CF6–45A, CF6–45A2, CF6– 50A, CF6–50C, CF6–50CA, CF6–50C1, CF6– 50C2, CF6–50C2B, CF6–50C2D, CF6–50E, CF6–50E1, CF6–50E2, and CF6–50E2B series turbofan engines with a long fixed core exhaust nozzle (LFCEN) assembly forward centerbody, part number (P/N) 1313M55G01 or G02, P/N 9076M28G09 or G10, and aft centerbody P/N 1313M56G01 or 9076M46G05, installed. These engines are installed on, but not limited to, Airbus A300 series, Boeing 747 series, McDonnell Douglas DC–10 series, and DC–10–30F (KDC–10) airplanes. Unsafe Condition (d) This AD results from reports of separation of LFCEN assembly forward and aft centerbodies due to high imbalance engine conditions. This AD results from the GE issuing new service information. We are issuing this AD to prevent the forward and aft centerbody of the LFCEN assembly from separating due to high imbalance engine conditions, leading to damage to the airplane. Compliance (e) You are responsible for having the actions required by this AD performed within 42 months after the effective date of this AD, unless the actions have already been done. VerDate Nov<24>2008 (f) Replace the forward centerbody, P/N 1313M55G01 or G02, P/N 9076M28G09 or G10, and aft centerbody, P/N 1313M56G01 or 9076M46G05 with a forward and aft centerbody that have been modified using with the Accomplishment Instructions, Section 3, of GE Service Bulletin No. CF6– 50 S/B 78–0244, Revision 1, dated March 13, 2008, CF6–50 S/B 78–0244, dated July 30, 2007, or CF6–50 S/B 78–0242, dated September 26, 2005. 14:57 Feb 25, 2009 Jkt 217001 14 CFR Part 39 [Docket No. FAA–2008–1006; Directorate Identifier 2008–NM–110–AD; Amendment 39–15822; AD 2009–04–16] RIN 2120–AA64 Airworthiness Directives; Boeing Model 747–100, 747–100B, 747–200B, 747–200C, 747–200F, 747–300, 747SR, and 747SP Series Airplanes AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. SUMMARY: The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 747–100, 747–100B, 747–200B, 747– 200C, 747–200F, 747–300, 747SR, and 747SP series airplanes. That AD currently requires an inspection to determine if acceptable external skin doublers are installed at the stringer 6 (S–6) lap splices, between station (STA) 340 and STA 400. For airplanes without the acceptable external skin doublers, the existing AD also requires repetitive PO 00000 Frm 00035 Fmt 4700 Sfmt 4700 8737 related investigative actions and corrective actions if necessary. The existing AD also provides an optional terminating modification for the repetitive related investigative actions. This new AD mandates the optional terminating modification. This AD results from a report of cracked fastener holes at the right S–6 lap splice between STA 340 and STA 380. We are issuing this AD to prevent cracking in the fuselage skin, which could result in rapid decompression and loss of structural integrity of the airplane. DATES: This AD becomes effective April 2, 2009. On May 20, 2008 (73 FR 29042, May 20, 2008), the Director of the Federal Register approved the incorporation by reference of Boeing Alert Service Bulletin 747–53A2748, dated May 9, 2008. ADDRESSES: For service information identified in this AD, contact Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124–2207; telephone 206–544–9990; fax 206–766– 5682; e-mail DDCS@boeing.com; Internet https:// www.myboeingfleet.com. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The address for the Docket Office (telephone 800–647–5527) is the Document Management Facility, U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Ivan Li, Aerospace Engineer, Airframe Branch, ANM–120S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98057–3356; telephone (425) 917–6437; fax (425) 917–6590. SUPPLEMENTARY INFORMATION: Discussion The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an AD that supersedes AD 2008–10–15, amendment 39–15522 (73 FR 29042, May 20, 2008). The existing AD applies to certain Boeing Model 747–100, 747–100B, 747– 200B, 747–200C, 747–200F, 747–300, 747SR, and 747SP series airplanes. That NPRM was published in the Federal E:\FR\FM\26FER1.SGM 26FER1

Agencies

[Federal Register Volume 74, Number 37 (Thursday, February 26, 2009)]
[Rules and Regulations]
[Pages 8735-8737]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-3615]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2006-24145; Directorate Identifier 2006-NE-06-AD; 
Amendment 39-15823; AD 2009-04-17]
RIN 2120-AA64


Airworthiness Directives; General Electric Company CF6-45 and 
CF6-50 Series Turbofan Engines

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for 
General Electric Company (GE) CF6-45 and CF6-50 series turbofan 
engines. This AD requires replacing certain forward and aft 
centerbodies of the long fixed core exhaust nozzle (LFCEN) assembly. 
This AD results from the engine manufacturer issuing new service 
information. We are issuing this AD to prevent the forward and aft 
centerbody of the LFCEN assembly from separating due to high imbalance 
engine conditions, leading to damage to the airplane.

DATES: This AD becomes effective April 2, 2009. The Director of the 
Federal Register approved the incorporation by reference of certain 
publications listed in the regulations as of April 2, 2009.

ADDRESSES: You can get the service information identified in this AD 
from General Electric Company via GE-Aviation, Attn: Distributions, 111 
Merchant St., Room 230, Cincinnati, Ohio 45246, telephone (513) 552-
3272; fax (513) 552-3329.
    The Docket Operations office is located at the Docket Management 
Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, 
SE., West Building Ground Floor, Room W12-140, Washington, DC 20590-
0001.

FOR FURTHER INFORMATION CONTACT: Robert Green, Aerospace Engineer, 
Engine Certification Office, FAA, Engine & Propeller Directorate, 12 
New England Executive Park, Burlington, MA 01803; e-mail: 
robert.green@faa.gov; telephone (781) 238-7754; fax (781) 238-7199.

SUPPLEMENTARY INFORMATION: The FAA proposed to amend 14 CFR part 39 
with a proposed AD. The proposed AD applies to (GE) CF6-45 and CF6-50 
series turbofan engines. We published the proposed AD in the Federal 
Register on January 2, 2008, (73 FR 77). That action proposed to 
require replacing the centerbodies with centerbodies that were modified 
using the Accomplishment Instructions, Section 3, of GE SB No. CF6-50 
S/B 78-0244, dated July 30, 2007, within 42 months of the effective 
date of the proposed AD.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://
www.regulations.gov; or in person at the Docket Operations office 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The AD docket contains this AD, the regulatory evaluation, 
any comments received, and other information. The street address for 
the Docket Operations office (telephone (800) 647-5527) is provided in 
the ADDRESSES section. Comments will be available in the AD docket 
shortly after receipt.

Comments

    We provided the public the opportunity to participate in the

[[Page 8736]]

development of this AD. We have considered the comments received.

Requests To Allow Credit for Rework Performed Using GE Service Bulletin 
CF6-50 S/B 78-0242

    Two commenters, Atlas Air and Evergreen International Airlines, 
asked us to allow credit for rework performed using GE Service Bulletin 
(SB) CF6-50 S/B 78-0242, dated September 26, 2005. The commenters state 
the original issue and later revision of GE SB CF6-50 S/B 78-0244 state 
in Section 1, Planning Information, that forward and aft centerbody 
assemblies reworked in accordance with GE SB CF6-50 S/B 78-0242, meet 
the requirement of the GE SB.
    We agree. The rework defined by GE SB CF6-50 S/B 78-0242 meets the 
requirements of GE SB CF6-50 S/B 78-0244, Revision 1. Also, there might 
be forward and aft centerbody assemblies that have been reworked using 
the original issue of GE SB CF6-50 S/B 78-0244, which is acceptable. We 
have added references to GE SB CF6-50 S/B 78-0244, dated July 30, 2007, 
and GE SB CF6-50 S/B 78-0242, dated September 26, 2005, to paragraph 
(f) of this AD.

Request To Add GE SB CF6-50 S/B 78-0244, Revision 1, Dated March 13, 
2008 to the AD Compliance Section

    Two commenters, GE Aviation and Boeing Commercial Airplane 
Services, ask us to reference SB CF6-50 S/B 78-0244, Revision 1, dated 
March 13, 2008, in the compliance section of the proposed AD. The 
commenters state that operators cannot get the rivets identified in 
Section 2. Material Information, paragraph A. (1) of the original issue 
of GE SB CF6-50 S/B 78-0244. Those rivets are part numbers (P/Ns) 
NAS1398M3-2 and NAS 1398M3-3. GE identified alternative rivets P/Ns 
NAS13984-2 and NAS13984-3 in SB CF6-50 S/B 78-0244, Revision 1, dated 
March 13, 2008.
    We agree. We have changed GE SB CF6-50 S/B 78-0244, dated July 30, 
2007, to GE SB CF6-50 S/B 78-0244, Revision 1, dated March 13, 2008, in 
the regulatory text.

Recommendation To Use Rivet P/N NAS9307 as an Alternative to P/Ns 
NAS13984-2 and NAS13984-3

    One commenter, Nordam Prism, recommends we allow using alternative 
rivets, P/N NAS9307, for installing the forward centerbody forward 
doubler. The commenter suggests the P/N NAS9307 rivet is more reliable 
than the specified P/N NAS1398 rivet. The commenter states the P/N 
NAS9307 rivet locking collar is designed as a positive security device 
that forms the rivet sleeve into the locking stem, thereby promoting 
joint integrity while in service. The commenter states the P/N NAS1398 
rivet doesn't offer this feature, and the lock has a tendency to 
release in service. The commenter further notes the P/N NAS9307 rivet 
design provides a more consistent installation with visual confirmation 
of an acceptable mechanical fit. Previous experience with P/N NAS1398 
rivets would often result in inspectors not accepting rivet 
installation due to misplaced locking collars. The resulting removal 
increased the tendency for an oversized rivet hole. In this particular 
GE SB CF6-50 S/B 78-0244 application, there exists no tolerance for 
oversizing the hole and installing a larger rivet. The first article 
assembly effectively used the P/N NAS9307 rivet in this application.
    We don't agree. GE states the P/N NAS9307 rivet doesn't offer a 
0.094-inch diameter option that is consistent with the existing repair. 
The proposed P/N NAS9307M-4-0X rivet size (0.125-inch diameter) would 
work in this configuration, but the repair area might not accommodate 
the next higher, P/N NAS9307M-5-0X rivet size (0.165-inch diameter), 
precluding oversized rivet holes or future repairs. GE further notes 
the spindle material of the P/N NAS9307 rivet might be made of PH15-7 
corrosion resistant steel. The P/N PH15-7 material doesn't offer the 
same corrosion resistance in an exhaust environment as the A386 spindle 
material used in the P/N NAS1398 rivets. We didn't change the 
Regulatory text.

Request To Remove the KC-10A Airplane From the ``Used on'' Section of 
Paragraph (c) of the Proposed AD

    One commenter, Boeing Commercial Airplane Services, asks us to 
remove the reference to the KC-10A airplane from the ``used on but not 
limited to'' sentence in paragraph (c) of the proposed AD. Boeing 
states the KC-10A doesn't use the LFCEN configuration.
    We agree. We supply the ``used on, but not limited to'' list of 
airplanes in paragraph (c) of the proposed AD to aid operators and 
users in identifying if their airplane might use the affected engines. 
Since the list is for information only, we are not expanding the scope 
of the proposed AD by adding or removing any airframe. We removed the 
KC-10A from the ``installed on but not limited to'' sentence in 
paragraph (c) of this AD.

Conclusion

    We have carefully reviewed the available data, including the 
comments received, and determined that air safety and the public 
interest require adopting the AD with the changes described previously. 
We have determined that these changes will neither increase the 
economic burden on any operator nor increase the scope of the AD.

Costs of Compliance

    We estimate that this AD will affect 379 GE CF6-45 and CF6-50 
series turbofan engines installed on airplanes of U.S. registry. We 
also estimate that it will take about 44 work hours per engine to 
perform the actions, and that the average labor rate is $80 per work 
hour. Required parts would cost about $11,000 per engine. Based on 
these figures, we estimate the total cost of this AD to U.S. operators 
to be $2,802,360.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106, describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701, ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We have determined that this AD will not have federalism 
implications under Executive Order 13132. This AD will not have a 
substantial direct effect on the States, on the relationship between 
the national government and the States, or on the distribution of power 
and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866;
    (2) Is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979); and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities

[[Page 8737]]

under the criteria of the Regulatory Flexibility Act.
    We prepared a summary of the costs to comply with this AD and 
placed it in the AD Docket. You may get a copy of this summary at the 
address listed under ADDRESSES.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Safety.

Adoption of the Amendment

0
Accordingly, under the authority delegated to me by the Administrator, 
the Federal Aviation Administration amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2009-04-17 General Electric Company: Amendment 39-15823. Docket No. 
FAA-2006-24145; Directorate Identifier 2006-NE-06-AD.

Effective Date

    (a) This airworthiness directive (AD) becomes effective April 2, 
2009.

Affected ADs

    (b) None.

Applicability

    (c) This AD applies to General Electric Company (GE) CF6-45A, 
CF6-45A2, CF6-50A, CF6-50C, CF6-50CA, CF6-50C1, CF6-50C2, CF6-50C2B, 
CF6-50C2D, CF6-50E, CF6-50E1, CF6-50E2, and CF6-50E2B series 
turbofan engines with a long fixed core exhaust nozzle (LFCEN) 
assembly forward centerbody, part number (P/N) 1313M55G01 or G02, P/
N 9076M28G09 or G10, and aft centerbody P/N 1313M56G01 or 
9076M46G05, installed. These engines are installed on, but not 
limited to, Airbus A300 series, Boeing 747 series, McDonnell Douglas 
DC-10 series, and DC-10-30F (KDC-10) airplanes.

Unsafe Condition

    (d) This AD results from reports of separation of LFCEN assembly 
forward and aft centerbodies due to high imbalance engine 
conditions. This AD results from the GE issuing new service 
information. We are issuing this AD to prevent the forward and aft 
centerbody of the LFCEN assembly from separating due to high 
imbalance engine conditions, leading to damage to the airplane.

Compliance

    (e) You are responsible for having the actions required by this 
AD performed within 42 months after the effective date of this AD, 
unless the actions have already been done.
    (f) Replace the forward centerbody, P/N 1313M55G01 or G02, P/N 
9076M28G09 or G10, and aft centerbody, P/N 1313M56G01 or 9076M46G05 
with a forward and aft centerbody that have been modified using with 
the Accomplishment Instructions, Section 3, of GE Service Bulletin 
No. CF6-50 S/B 78-0244, Revision 1, dated March 13, 2008, CF6-50 S/B 
78-0244, dated July 30, 2007, or CF6-50 S/B 78-0242, dated September 
26, 2005.

Alternative Methods of Compliance

    (g) The Manager, Engine Certification Office, has the authority 
to approve alternative methods of compliance for this AD if 
requested using the procedures found in 14 CFR 39.19.

Related Information

    (h) Contact Robert Green, Aerospace Engineer, Engine 
Certification Office, FAA, Engine & Propeller Directorate, 12 New 
England Executive Park, Burlington, MA 01803; e-mail: 
robert.green@faa.gov; telephone (781) 238-7754; fax (781) 238-7199, 
for more information about this AD.

Material Incorporated by Reference

    (i) None.

    Issued in Burlington, Massachusetts, on February 12, 2009.
Francis A. Favara,
Manager, Engine and Propeller Directorate, Aircraft Certification 
Service.
[FR Doc. E9-3615 Filed 2-25-09; 8:45 am]
BILLING CODE 4910-13-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.