Foreign-Trade Zone 26-Atlanta, GA; Application for Temporary/Interim Manufacturing Authority; Termination of Review; Kia Motors Manufacturing Georgia, Inc. (Motor Vehicles), 58536 [E8-23738]

Download as PDF 58536 Federal Register / Vol. 73, No. 195 / Tuesday, October 7, 2008 / Notices payments on the foreign components used in export production. The company anticipates that some 27 percent of the plant’s stainless steel shipments and 5–10 percent of its carbon steel shipments will be exported. On its domestic sales, ThyssenKrupp would be able to choose the duty rates during customs entry procedures that apply to the finished stainless steel and carbon steel products (duty-free) for the foreign inputs noted above. The request indicates that the savings from FTZ procedures would help improve the plant’s international competitiveness. In accordance with the Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to investigate the application and report to the Board. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is December 8, 2008. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to December 22, 2008. A copy of the application and accompanying exhibits will be available for public inspection at each of the following locations: Office of the City Clerk, City of Mobile, 9th Floor, South Tower, Government Plaza, 205 Government Street, Mobile, AL 36602. Office of the Executive Secretary, Foreign-Trade Zones Board, U.S. Department of Commerce, Room 2111, 1401 Constitution Ave. NW., Washington, DC 20230. For further information, contact Elizabeth Whiteman at Elizabeth_Whiteman@ita.doc.gov or (202) 482–0473. Dated: October 1, 2008. Andrew McGilvray, Executive Secretary. [FR Doc. E8–23737 Filed 10–6–08; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board mstockstill on PROD1PC66 with NOTICES [Docket T–2–2008] Foreign-Trade Zone 26—Atlanta, GA; Application for Temporary/Interim Manufacturing Authority; Termination of Review; Kia Motors Manufacturing Georgia, Inc. (Motor Vehicles) Notice is hereby given that the Foreign-Trade Zones (FTZ) Board staff VerDate Aug<31>2005 18:23 Oct 06, 2008 Jkt 217001 has terminated its review of the application requesting temporary/ interim manufacturing (T/IM) authority within FTZ 26 at the Kia Motors Manufacturing Georgia, Inc. (KMMG) facility in West Point, Georgia. The application was filed on May 7, 2008 (73 FR 27492, 5–13–2008). Substantive comments submitted in opposition to the KMMG application during the public comment period remove the application from eligibility under the specific T/IM standard of ‘‘clearly presenting no new, complex, or controversial issues’’ (see ‘‘Proposals to Facilitate the Use of Foreign-Trade Zones by Small and Medium-Sized Manufacturers,’’ 69 FR 17643, 4/5/ 2004). The review was terminated on September 12, 2008. Dated: September 26, 2008. Andrew McGilvray, Executive Secretary. [FR Doc. E8–23738 Filed 10–6–08; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE [Order No. 1576] DEPARTMENT OF COMMERCE Grant of Authority for Subzone Status; Baker Hughes, Inc. (Barite Milling), Corpus Christi, TX Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the following Order: Whereas, the Foreign-Trade Zones Act provides for ‘‘* * * the establishment * * * of foreign-trade zones in ports of entry of the United States, to expedite and encourage foreign commerce, and for other purposes,’’ and authorizes the Foreign-Trade Zones Board to grant qualified corporations the privilege of establishing foreign-trade zones in or adjacent to U.S. Customs and Border Protection ports of entry; Whereas, the Board’s regulations (15 CFR Part 400) provide for the establishment of special-purpose subzones when existing zone facilities cannot serve the specific use involved, and when the activity results in a significant public benefit and is in the public interest; Whereas, the Port of Port of Corpus Christi Authority, grantee of ForeignTrade Zone 122, has made application to the Board for authority to establish a special-purpose subzone at the barite milling facility of Baker Hughes, Inc., located in Corpus Christi, Texas (FTZ Docket 15–2008, filed 2/25/08); Frm 00008 Fmt 4703 Signed at Washington, DC, this 18th day of September, 2008. David M. Spooner, Assistant Secretary of Commerce for Import Administration, Alternate Chairman, ForeignTrade Zones Board. Andrew McGilvray, Executive Secretary. [FR Doc. E8–23740 Filed 10–2–08; 8:45 am] BILLING CODE 3510–DS–P Foreign-Trade Zones Board PO 00000 Whereas, notice inviting public comment was given in the Federal Register (73 FR 12949, 3/11/08); and, Whereas, the Board adopts the findings and recommendations of the examiner’s report, and finds the requirements of the FTZ Act and the Board’s regulations are satisfied, and that approval of the application is in the public interest; Now, therefore, the Board hereby grants authority for subzone status for activity related to barite milling at the facility of Baker Hughes, Inc., located in Corpus Christi, Texas (Subzone 122Q), as described in the application and Federal Register notice, and subject to the FTZ Act and the Board’s regulations, including Section 400.28. Sfmt 4703 International Trade Administration Proposed Information Collection; Comment Request; Comment Card for E-mail Taglines U.S. and Foreign Commercial Service. ACTION: Notice. AGENCY: SUMMARY: The Department of Commerce, as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995. DATES: Written comments must be submitted on or before December 8, 2008. Direct all written comments to Diana Hynek, Departmental Paperwork Clearance Officer, Department of Commerce, Room 6625, 14th and Constitution Avenue, NW., Washington, DC 20230 (or via the Internet at dHynek@doc.gov). FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the information collection instrument and instructions should be directed to Suzan Winters—Phone: (202) 482–6042, ADDRESSES: E:\FR\FM\07OCN1.SGM 07OCN1

Agencies

[Federal Register Volume 73, Number 195 (Tuesday, October 7, 2008)]
[Notices]
[Page 58536]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-23738]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[Docket T-2-2008]


Foreign-Trade Zone 26--Atlanta, GA; Application for Temporary/
Interim Manufacturing Authority; Termination of Review; Kia Motors 
Manufacturing Georgia, Inc. (Motor Vehicles)

    Notice is hereby given that the Foreign-Trade Zones (FTZ) Board 
staff has terminated its review of the application requesting 
temporary/interim manufacturing (T/IM) authority within FTZ 26 at the 
Kia Motors Manufacturing Georgia, Inc. (KMMG) facility in West Point, 
Georgia. The application was filed on May 7, 2008 (73 FR 27492, 5-13-
2008). Substantive comments submitted in opposition to the KMMG 
application during the public comment period remove the application 
from eligibility under the specific T/IM standard of ``clearly 
presenting no new, complex, or controversial issues'' (see ``Proposals 
to Facilitate the Use of Foreign-Trade Zones by Small and Medium-Sized 
Manufacturers,'' 69 FR 17643, 4/5/2004). The review was terminated on 
September 12, 2008.

    Dated: September 26, 2008.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E8-23738 Filed 10-6-08; 8:45 am]
BILLING CODE 3510-DS-P