Marking Requirements for Parcel Select, 54712-54713 [E8-22075]

Download as PDF 54712 Federal Register / Vol. 73, No. 185 / Tuesday, September 23, 2008 / Rules and Regulations Diagnostic code No. THE SKIN * 7800 ....................... 7801 7802 7804 7805 ....................... ....................... ....................... ....................... * * * * * * Burn scar(s) of the head, face, or neck; scar(s) of the head, face, or neck due to other causes; or other disfigurement of the head, face, or neck. Burn scar(s) or scar(s) due to other causes, not of the head, face, or neck, that are deep and nonlinear. Burn scar(s) or scar(s) due to other causes, not of the head, face, or neck, that are superficial and nonlinear. Scar(s), unstable or painful. Scars, other. * * * 5. In Appendix C to Part 4, revise the disability entries immediately following the heading ‘‘Scars:’’ to read as follows: ■ * * * * Appendix C to Part 4—Alphabetical Index of Disabilities Diagnostic code No. * * * * * * Scars: Burn scar(s) of the head, face, or neck; scar(s) of the head, face, or neck due to other causes; or other disfigurement of the head, face, or neck ........................................................................................................................................................................... Burn scar(s) or scars(s) due to other causes, not of the head, face, or neck, that are deep and nonlinear ..................................... Burn scar(s) or scars(s) due to other causes, not of the head, face, or neck, that are superficial and nonlinear ............................. Other .................................................................................................................................................................................................... Retina ................................................................................................................................................................................................... Unstable or painful ............................................................................................................................................................................... * * * [FR Doc. E8–21980 Filed 9–22–08; 8:45 am] BILLING CODE 8320–01–P POSTAL SERVICE 39 CFR Part 111 Marking Requirements for Parcel Select AGENCY: ACTION: Postal ServiceTM. * • For BMC presort entry packages, use ‘‘Parcel Select BMC Presort’’ or ‘‘Parcel Select BMC PRSRT’’. • For OBMC presort entry packages (Inter-BMC) packages, use ‘‘Parcel Select OBMC Presort’’ or ‘‘Parcel Select OBMC PRSRT’’. • For barcoded Intra-BMC and barcoded Inter-BMC packages, use ‘‘Parcel Select Barcoded’’ or ‘‘Parcel Select BC’’. DATES: Final rule. * Effective Date: October 9, 2008. FOR FURTHER INFORMATION CONTACT: Bert * The Postal Service is revising Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM) to reflect changes to the marking requirements of our Shipping Services product, Parcel Select. On May 21, 2008, we published in the Federal Register (Volume 73, Number 99) the proposed rule describing Parcel Select marking changes. This final rule revises the effective date to October 9, 2008 (proposed rule date was September 30, 2008) when Parcel Select shippers must use one of the following markings, as appropriate, on each Parcel Select package: • For all destination entry packages, use ‘‘Parcel Select’’. jlentini on PROD1PC65 with RULES VerDate Aug<31>2005 16:35 Sep 22, 2008 Jkt 214001 7800 7801 7802 7805 6011 7804 * PART 111—[AMENDED] 1. The authority citation for 39 CFR part 111 continues to read as follows: ■ Authority: 5 U.S.C. 552(a); 39 U.S.C. 101, 401, 403, 404, 414, 416, 3001–3011, 3201– 3219, 3403–3406, 3621, 3622, 3626, 3632, 3633, and 5001. 2. Revise the following sections of Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM), as follows: * * * * * ■ Olsen at 202–268–7276. SUMMARY: * 400 Commercial Mail Parcels SUPPLEMENTARY INFORMATION: * * Comments 402 Elements on the Face of a Mailpiece There were no comments received on the May 21, 2008 proposed rule. The Postal Service adopts the following changes to Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM), incorporated by reference in the Code of Federal Regulations. See 39 CFR 111.1. List of Subjects in 39 CFR Part 111 Administrative practice and procedure, Postal Service. Accordingly, 39 CFR part 111 is amended as follows: ■ PO 00000 Frm 00048 Fmt 4700 Sfmt 4700 * * * * * * * * 2.0 Placement and Content of Markings * * * * * 2.2 Parcel Select, Bound Printed Matter, Media Mail, and Library Mail Markings 2.2.1 Basic Markings [Revise the text of 2.2.1 as follows:] The basic required marking (e.g., ‘‘Parcel Select’’, ‘‘Bound Printed Matter’’, ‘‘Media Mail’’, ‘‘Library Mail’’) E:\FR\FM\23SER1.SGM 23SER1 Federal Register / Vol. 73, No. 185 / Tuesday, September 23, 2008 / Rules and Regulations must be printed on each piece claimed at the respective price. The basic required marking must be placed in the postage area (printed or produced as part of, or directly below or to the left of, the permit imprint indicia or meter stamp or impression). Optionally, the basic required marking may be printed on the shipping address label as service indicators composed of a service icon and service banner (see Exhibit 2.2.1): a. The service icon that identifies the marking will be a 1-inch solid black square. If the service icon is used, it must appear in the upper left corner of the shipping label. b. The service banner must appear directly below the postage payment area and the service icon, and it must extend across the shipping label. If the service banner is used, the appropriate marking (e.g., ‘‘PARCEL SELECT’’, ‘‘MEDIA MAIL’’) must be preceded by the text ‘‘USPS’’ and must be printed in minimum 20-point bold sans serif typeface, uppercase letters, centered within the banner, and bordered above and below by minimum 1-point separator lines. There must be a 1⁄16inch clearance above and below the text. [Revise the heading of exhibit 2.2.1 as follows:] jlentini on PROD1PC65 with RULES Exhibit 2.2.1 Marking Indicator Examples [Revise Exhibit 2.2.1 by replacing ‘‘USPS PARCEL POST’’ WITH ‘‘USPS PARCEL SELECT’’.] Parcel Select * * * VerDate Aug<31>2005 * * 16:35 Sep 22, 2008 Jkt 214001 Mail Preparation * * * * * 1.0 General Information for Mail Preparation * * * * * 1.8 Parcel Select Markings [Revise text of 1.8 as follows:] Each piece in a Parcel Select mailing must bear a price marking. Markings must appear in either the postage area described in 402.2.2.1 or in the address area on the line directly above or two lines above the address if the marking appears alone (when no other information appears on that line). The ‘‘Parcel Post’’ marking is not allowed on any Parcel Select mailpiece. The following product markings are required: a. Destination Entry—‘‘Parcel Select’’. b. BMC Presort—‘‘Parcel Select BMC Presort’’ or ‘‘Parcel Select BMC PRSRT’’. c. OBMC Presort (Inter-BMC)— ‘‘Parcel Select OBMC Presort’’ or ‘‘Parcel Select OBMC PRSRT’’. d. Barcoded Intra-BMC and Barcoded Inter-BMC—‘‘Parcel Select Barcoded’’ or ‘‘Parcel Select BC’’. * * * * * Neva Watson, Attorney, Legislative. [FR Doc. E8–22075 Filed 9–22–08; 8:45 am] BILLING CODE 7710–12–P 2.2.2 Parcel Select Markings [Revise the text in 2.2.2 as follows:] Each piece in a Parcel Select mailing must bear a price marking. Markings must appear in either the postage area described in 2.2.1 or in the address area on the line directly above or two lines above the address if the marking appears alone (when no other information appears on that line). The ‘‘Parcel Post’’ marking is not allowed on any Parcel Select mailpiece. The following product markings are required: a. Destination Entry—‘‘Parcel Select’’. b. BMC Presort—‘‘Parcel Select BMC Presort’’ or ‘‘Parcel Select BMC PRSRT’’. c. OBMC Presort (Inter-BMC)— ‘‘Parcel Select OBMC Presort’’ or ‘‘Parcel Select OBMC PRSRT’’. d. Barcoded Intra-BMC and Barcoded Inter-BMC—‘‘Parcel Select Barcoded’’ or ‘‘Parcel Select BC’’. [Delete 2.2.3 in its entirety and renumber current 2.2.4 through 2.2.7 as 2.2.3 through 2.2.6] * * * * * 450 455 ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 261 [EPA–R06–RCRA–2008–0455; SW–FRL– 8713–3] Hazardous Waste Management System; Identification and Listing of Hazardous Waste; Final Rule Environmental Protection Agency. ACTION: Final rule. AGENCY: SUMMARY: The Environmental Protection Agency (EPA) is issuing a final rule to add the name of Structural Metals, Inc, to the exclusion granted to Conversion Systems Inc., (CSI) on June 13, 1995. As described in the exclusion issued to CSI in paragraph (1)(B), the Agency shall add the location of the treatment facility and the name of the steel mill contracting CSI’s services. This rule adds the location of U.S. Ecology, Texas Ecology in Robstown, Texas as the treatment facility and Structural Metals, Inc. as the steel mill contracting the services of CSI. This rule also updates the 1995 exclusion to include PO 00000 Frm 00049 Fmt 4700 Sfmt 4700 54713 Paragraphs (6) and (7), the Delisting Reopener language and Notification Requirements; and other updates regarding the disposal and submission of Quality Assurance Plan prior to submission of data for a new facility. DATES: This rule is effective September 23, 2008. ADDRESSES: The public docket for this direct final rule is located at 1445 Ross Avenue in the FOIA Review Room, identified by Docket ID No. EPA–R06– RCRA–2008–0455. All documents in the electronic docket are listed in the https://www.regulations.gov index. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available either electronically in https:// www.regulations.gov or in hard copy at the Environmental Protection Agency, RCRA Branch, 1445 Ross Avenue, Dallas, TX 75202. The hard copy RCRA regulatory docket for this direct final rule, EPA–R06–RCRA–2008–0455, is available for viewing from 9 a.m. to 4 p.m., Monday through Friday, excluding Federal holidays. The public may copy material from the regulatory docket at $0.15 per page. EPA requests that you contact the person listed in the FOR FURTHER INFORMATION CONTACT section to schedule your inspection. The interested persons wanting to examine these documents should make an appointment with the office at least 24 hours in advance. The public may copy material from any regulatory docket at no cost for the first 100 pages and at a cost of $0.15 per page for additional copies. For further technical information concerning this document or for appointments to view the docket, contact Michelle Peace, Environmental Protection Agency, Multimedia Planning and Permitting Division, RCRA Branch, Mail Code: 6PD–C, 1445 Ross Avenue, Dallas, TX 75202, by calling 214–665–7430 or by e-mail at peace.michelle@epa.gov. FOR FURTHER INFORMATION CONTACT: On June 13, 1995 (60 FR 31107), EPA finalized a conditional multiple site exclusion to Conversion Systems Inc., in Horsham, Pennsylvania. In 1995, CSI petitioned EPA for a multiple site exclusion for chemically stabilized electric arc furnace dust (CSEAFD) resulting from the Super DetoxTM process as modified by CSI. The original Super DetoxTM SUPPLEMENTARY INFORMATION: E:\FR\FM\23SER1.SGM 23SER1

Agencies

[Federal Register Volume 73, Number 185 (Tuesday, September 23, 2008)]
[Rules and Regulations]
[Pages 54712-54713]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-22075]


=======================================================================
-----------------------------------------------------------------------

POSTAL SERVICE

39 CFR Part 111


Marking Requirements for Parcel Select

AGENCY: Postal ServiceTM.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The Postal Service is revising Mailing Standards of the United 
States Postal Service, Domestic Mail Manual (DMM[supreg]) to reflect 
changes to the marking requirements of our Shipping Services product, 
Parcel Select[supreg]. On May 21, 2008, we published in the Federal 
Register (Volume 73, Number 99) the proposed rule describing Parcel 
Select marking changes. This final rule revises the effective date to 
October 9, 2008 (proposed rule date was September 30, 2008) when Parcel 
Select shippers must use one of the following markings, as appropriate, 
on each Parcel Select package:
     For all destination entry packages, use ``Parcel Select''.
     For BMC presort entry packages, use ``Parcel Select BMC 
Presort'' or ``Parcel Select BMC PRSRT''.
     For OBMC presort entry packages (Inter-BMC) packages, use 
``Parcel Select OBMC Presort'' or ``Parcel Select OBMC PRSRT''.
     For barcoded Intra-BMC and barcoded Inter-BMC packages, 
use ``Parcel Select Barcoded'' or ``Parcel Select BC''.

DATES: Effective Date: October 9, 2008.

FOR FURTHER INFORMATION CONTACT: Bert Olsen at 202-268-7276.

SUPPLEMENTARY INFORMATION:

Comments

    There were no comments received on the May 21, 2008 proposed rule.
    The Postal Service adopts the following changes to Mailing 
Standards of the United States Postal Service, Domestic Mail Manual 
(DMM), incorporated by reference in the Code of Federal Regulations. 
See 39 CFR 111.1.

List of Subjects in 39 CFR Part 111

    Administrative practice and procedure, Postal Service.

0
Accordingly, 39 CFR part 111 is amended as follows:

PART 111--[AMENDED]

0
1. The authority citation for 39 CFR part 111 continues to read as 
follows:

    Authority: 5 U.S.C. 552(a); 39 U.S.C. 101, 401, 403, 404, 414, 
416, 3001-3011, 3201-3219, 3403-3406, 3621, 3622, 3626, 3632, 3633, 
and 5001.


0
2. Revise the following sections of Mailing Standards of the United 
States Postal Service, Domestic Mail Manual (DMM), as follows:
* * * * *

400 Commercial Mail Parcels

* * * * *

402 Elements on the Face of a Mailpiece

* * * * *

2.0 Placement and Content of Markings

* * * * *

2.2 Parcel Select, Bound Printed Matter, Media Mail, and Library Mail 
Markings

2.2.1 Basic Markings

    [Revise the text of 2.2.1 as follows:]
    The basic required marking (e.g., ``Parcel Select'', ``Bound 
Printed Matter'', ``Media Mail'', ``Library Mail'')

[[Page 54713]]

must be printed on each piece claimed at the respective price. The 
basic required marking must be placed in the postage area (printed or 
produced as part of, or directly below or to the left of, the permit 
imprint indicia or meter stamp or impression). Optionally, the basic 
required marking may be printed on the shipping address label as 
service indicators composed of a service icon and service banner (see 
Exhibit 2.2.1):
    a. The service icon that identifies the marking will be a 1-inch 
solid black square. If the service icon is used, it must appear in the 
upper left corner of the shipping label.
    b. The service banner must appear directly below the postage 
payment area and the service icon, and it must extend across the 
shipping label. If the service banner is used, the appropriate marking 
(e.g., ``PARCEL SELECT'', ``MEDIA MAIL'') must be preceded by the text 
``USPS'' and must be printed in minimum 20-point bold sans serif 
typeface, uppercase letters, centered within the banner, and bordered 
above and below by minimum 1-point separator lines. There must be a \1/
16\-inch clearance above and below the text.
    [Revise the heading of exhibit 2.2.1 as follows:]

Exhibit 2.2.1 Marking Indicator Examples

    [Revise Exhibit 2.2.1 by replacing ``USPS PARCEL POST'' WITH ``USPS 
PARCEL SELECT''.]

2.2.2 Parcel Select Markings

    [Revise the text in 2.2.2 as follows:]
    Each piece in a Parcel Select mailing must bear a price marking. 
Markings must appear in either the postage area described in 2.2.1 or 
in the address area on the line directly above or two lines above the 
address if the marking appears alone (when no other information appears 
on that line). The ``Parcel Post'' marking is not allowed on any Parcel 
Select mailpiece. The following product markings are required:
    a. Destination Entry--``Parcel Select''.
    b. BMC Presort--``Parcel Select BMC Presort'' or ``Parcel Select 
BMC PRSRT''.
    c. OBMC Presort (Inter-BMC)--``Parcel Select OBMC Presort'' or 
``Parcel Select OBMC PRSRT''.
    d. Barcoded Intra-BMC and Barcoded Inter-BMC--``Parcel Select 
Barcoded'' or ``Parcel Select BC''.
    [Delete 2.2.3 in its entirety and renumber current 2.2.4 through 
2.2.7 as 2.2.3 through 2.2.6]
* * * * *

450 Parcel Select

* * * * *

455 Mail Preparation

* * * * *

1.0 General Information for Mail Preparation

* * * * *

1.8 Parcel Select Markings

    [Revise text of 1.8 as follows:]
    Each piece in a Parcel Select mailing must bear a price marking. 
Markings must appear in either the postage area described in 402.2.2.1 
or in the address area on the line directly above or two lines above 
the address if the marking appears alone (when no other information 
appears on that line). The ``Parcel Post'' marking is not allowed on 
any Parcel Select mailpiece. The following product markings are 
required:
    a. Destination Entry--``Parcel Select''.
    b. BMC Presort--``Parcel Select BMC Presort'' or ``Parcel Select 
BMC PRSRT''.
    c. OBMC Presort (Inter-BMC)--``Parcel Select OBMC Presort'' or 
``Parcel Select OBMC PRSRT''.
    d. Barcoded Intra-BMC and Barcoded Inter-BMC--``Parcel Select 
Barcoded'' or ``Parcel Select BC''.
* * * * *

Neva Watson,
Attorney, Legislative.
[FR Doc. E8-22075 Filed 9-22-08; 8:45 am]
BILLING CODE 7710-12-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.