Certain New Chemicals; Receipt and Status Information, 49189-49194 [E8-19304]
Download as PDF
Federal Register / Vol. 73, No. 162 / Wednesday, August 20, 2008 / Notices
TABLE 2.—REGISTRANTS REQUESTING and all other provisions of any earlier
VOLUNTARY CANCELLATION AND/OR cancellation action are controlling.
AMENDMENTS—Continued
VI. Provisions for Disposition of
EPA Company
Number
8119
Existing Stocks
Company Name and
Address
Matson, LLC
c/o Registrations by Design, Inc.
118 1/2 East Main
Street, Ste. 1
Salem, Virginia 241533805
9198
The Andersons Lawn
Fertilizer Division, Inc.
P.O. Box 119
Maumee, Ohio 43537
11656
Western Farm Service
2787 W. Bullard Suite
105
Fresno, CA 93711
19713
Drexel Chemical Company
1700 Channel Avenue
Post Office Box 13327
Memphis, TN 381130327
71096
Or-Cal, Inc.
17220 Westview Road
Oswego, Oregon 97034
82200
Viachem, LLC
9701 Fields Road, No.
2400
Gaithersburg, Maryland
20878
dwashington3 on PRODPC61 with NOTICES
IV. What is the Agency’s Authority for
Taking this Action?
Section 6(f)(1) of FIFRA provides that
a registrant of a pesticide product may
at any time request that any of its
pesticide registrations be canceled or
amended to terminate one or more uses.
FIFRA further provides that, before
acting on the request, EPA must publish
a notice of receipt of any such request
in the Federal Register. Thereafter,
following the public comment period,
the Administrator may approve such a
request.
V. Procedures for Withdrawal of
Request and Considerations for
Reregistration of Carbaryl
Registrants who choose to withdraw a
request for cancellation must submit
such withdrawal in writing to the
person listed under FOR FURTHER
INFORMATION CONTACT, postmarked
before September 19, 2008. This written
withdrawal of the request for
cancellation will apply only to the
applicable FIFRA section 6(f)(1) request
listed in this notice. If the products have
been subject to a previous cancellation
action, the effective date of cancellation
VerDate Aug<31>2005
15:36 Aug 19, 2008
Jkt 214001
Existing stocks are those stocks of
registered pesticide products which are
currently in the United States and
which were packaged, labeled, and
released for shipment prior to the
effective date of the cancellation action.
In any order issued in response to
these requests for cancellation of
product registrations and for
amendments to terminate uses, the
Agency proposes to include the
following provisions for the treatment of
any existing stocks of the products
indentified or referenced in Tables 1
and 2 in Unit III. Provided that these
stocks bear labels previously approved
by EPA, registrants may sell and
distribute existing stocks of the affected
products for 18 months from the
effective date of the Agency’s
termination order, with the exception of
Scotts Ortho Business Group, who may
sell and distribute existing stocks of
EPA Registration Number 239-2514 in
Table 2 of Unit III. for 24 months from
the effective date of the Agency’s
termination order.
If the request for voluntary
cancellation and/or use termination is
granted as discussed in this unit, the
Agency intends to issue a cancellation
order that will allow persons other than
the registrant to continue to sell and/or
use existing stocks of canceled products
until such stocks are exhausted,
provided that such use is consistent
with the terms of the previously
approved labeling on, or that
accompanied, the canceled product. The
order will specifically prohibit any use
of existing stocks that is not consistent
with such previously approved labeling.
EPA intends to publish the cancellation
order in the Federal Register after the
end of the 30–day comment period for
this Notice.
List of Subjects
Environmental protection, Pesticides
and pests, Carbaryl, SEVIN.
Dated: August 12, 2008.
Steven Bradbury,
Director, Special Review and Reregistration
Division, Office of Pesticide Programs.
[FR Doc. E8–19171 Filed 8–19–08; 8:45 am]
BILLING CODE 6560–50–S
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
49189
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2008–0628; FRL–8379–7]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from July 28, 2008
through August 1, 2008, consists of the
PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before
September 19, 2008.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2008–0628, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2008–0628.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
E:\FR\FM\20AUN1.SGM
20AUN1
dwashington3 on PRODPC61 with NOTICES
49190
Federal Register / Vol. 73, No. 162 / Wednesday, August 20, 2008 / Notices
2008–0628. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
website to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
VerDate Aug<31>2005
15:36 Aug 19, 2008
Jkt 214001
Federal holidays. The telephone number
of the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from July 28, 2008
through August 1, 2008, consists of the
PMNs and TME, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
and TME, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
E:\FR\FM\20AUN1.SGM
20AUN1
49191
Federal Register / Vol. 73, No. 162 / Wednesday, August 20, 2008 / Notices
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 65 PREMANUFACTURE NOTICES RECEIVED FROM: 07/28/08 TO 08/01/08
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Polyether urethane block copolymer compound with unsaturated
fatty acids
(G) Polyether modified polyurethane
07/21/08
10/18/08
CBI
(G) Additive, open, non-dispersive
use
P–08–0548
07/21/08
10/18/08
CBI
P–08–0549
07/21/08
10/18/08
CBI
P–08–0550
07/21/08
10/18/08
07/21/08
10/18/08
P–08–0552
P–08–0553
07/21/08
07/21/08
10/18/08
10/18/08
Honeywell Specialty
Materials
Honeywell Specialty
Materials
CBI
CBI
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Foam additive
P–08–0551
P–08–0554
07/22/08
10/19/08
CBI
P–08–0555
07/24/08
10/21/08
CBI
P–08–0556
07/28/08
10/25/08
CBI
(G) Open non-dispersive
P–08–0557
P–08–0558
07/25/08
07/28/08
10/22/08
10/25/08
Cytec Industries Inc.
CBI
P–08–0559
P–08–0560
P–08–0561
P–08–0562
07/28/08
07/29/08
07/29/08
07/29/08
10/25/08
10/26/08
10/26/08
10/26/08
CBI
DIC International, LLC.
CBI
CBI
(G) Coatings resin
(S) Polyurethane acrylate used in the
manufacture of ultra violet curable
coatings
(G) Chemical intermediate
(G) Additive for lubricants
(S) Ingredient in fragrance compound
(G) Mining aid
P–08–0563
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0564
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0565
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0566
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0567
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0568
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0569
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0570
07/29/08
10/26/08
CBI
(G) Mining aid
P–08–0571
07/31/08
10/28/08
CBI
(G) Ink binder
P–08–0572
07/31/08
10/28/08
CBI
(G) Ink binder
P–08–0573
07/31/08
10/28/08
CBI
(G) Ink binder
P–08–0574
dwashington3 on PRODPC61 with NOTICES
P–08–0547
07/31/08
10/28/08
CBI
(G) Ink binder
P–08–0575
07/31/08
10/28/08
CBI
(G) Ink binder
P–08–0576
07/31/08
10/28/08
CBI
(G) Ink binder
VerDate Aug<31>2005
15:36 Aug 19, 2008
Jkt 214001
PO 00000
(S) Chemical intermediate (as CISisomer)
(G) Industrial wood coating
(G) industrial wood applications
(G) Aqueous polyurethane rubber
coating resin for open, non-dispersive use
(G) Polymer used in electronics manufacture
Frm 00033
Fmt 4703
Sfmt 4703
E:\FR\FM\20AUN1.SGM
(G)
Polyether
modified
polydimethylsiloxane
(S) 1-propene, 1,3,3,3-tetrafluoro-,
(1E)(S) 1-propene, 1,3,3,3-tetrafluoro-,
(1Z)(G) Multifunctional acrylate
(G) Polycarbonate polyurethane acrylate oligomer
(G) Aqueous polyurethane dispersion
(G) Polymer of aromatic dianhydride,
aromatic
diamine
and
polysiloxanediamine.
(G) Aromatic prepolymer based on
TDI
(G) Acrylated aliphatic polyurethane
(G) Polyurethane acrylate
(G) Aliphatic ketoxime
(G) Modified polyalkyldiene polymer
(G) Cycloaklyl piperonyl ether
(S) Tall oil, maleated, oxidized, sodium salts
(S) Tall oil, maleated, oxidized, potassium salts
(S) Tall oil, maleated, oxidized, calcium salts
(S) Tall oil, maleated, oxidized, ammonium salts
(S) Fatty acids, tall oil, maleated,
oxidized, sodium salts
(S) Fatty acids, tall oil, maleated,
oxidized, potassium salts
(S) Fatty acids, tall oil, maleated,
oxidized, calcium salts
(S) Fatty acids, tall oil, maleated,
oxidized, ammonium salts
(S) Fatty acids, tall oil, polymd.,
oxidized, sodium salts
(G) Acrylate, polymer with acrylate,
ketoacrylamide, styrene and acrylate
(G) Acrylate, polymer with acrylate,
ketoacrylamide, styrene and acrylate, ammonium salt
(G) Acrylate, polymer with acrylate,
ketoacrylamide, styrene and acrylate, sodium salt
(G) Acrylate, polymer with acrylate,
ketoacrylamide, styrene and acrylate, potassium salt
(G) Acrylate, polymer with acrylate,
ketoacrylamide, styrene and acrylate, compound with amino alcohol
(G) Acrylate, polymer with acrylate,
ketoacrylamide, styrene and acrylate, compound with amino alcohol
20AUN1
49192
Federal Register / Vol. 73, No. 162 / Wednesday, August 20, 2008 / Notices
I. 65 PREMANUFACTURE NOTICES RECEIVED FROM: 07/28/08 TO 08/01/08—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0578
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0579
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0580
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0581
07/31/08
10/28/08
CBI
(G) Adhesive, coating,ink
P–08–0582
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0583
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0584
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0585
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0586
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0587
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0588
07/31/08
10/28/08
CBI
(G) Adhesive, coating, ink
P–08–0589
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0590
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0591
dwashington3 on PRODPC61 with NOTICES
P–08–0577
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0592
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0593
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
VerDate Aug<31>2005
15:36 Aug 19, 2008
Jkt 214001
PO 00000
Frm 00034
Fmt 4703
Sfmt 4703
E:\FR\FM\20AUN1.SGM
Chemical
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate, triacrylate and epoxy
diacrylate with .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate, triacrylate and epoxy
diacrylate with .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate, triacrylate and epoxy
diacrylate with .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate, triacrylate and epoxy
diacrylate with .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate, triacrylate and epoxy
diacrylate with .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate, triacrylate and epoxy
diacrylate with .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
triacrylate,
diacrylate,
.beta.ketoester and dialkylmine.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
triacrylate,
diacrylate,
.beta.ketoester and dialkylmine.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
triacrylate,
diacrylate,
.beta.ketoester and dialkylmine.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
triacrylate,
diacrylate,
.beta.ketoester and dialkylmine.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
triacrylate,
diacrylate,
.beta.ketoester and dialkylmine.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
triacrylate,
diacrylate,
.beta.ketoester and dialkylmine.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester
20AUN1
49193
Federal Register / Vol. 73, No. 162 / Wednesday, August 20, 2008 / Notices
I. 65 PREMANUFACTURE NOTICES RECEIVED FROM: 07/28/08 TO 08/01/08—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0595
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0596
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0597
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0598
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0599
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0600
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0601
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0602
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0603
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0604
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0605
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0606
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0607
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0608
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0609
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0610
dwashington3 on PRODPC61 with NOTICES
P–08–0594
08/01/08
10/29/08
CBI
(G) Ink, coating, adhesive
P–08–0611
08/01/08
10/29/08
CBI
(G) Rubber additive
VerDate Aug<31>2005
15:36 Aug 19, 2008
Jkt 214001
PO 00000
Frm 00035
Fmt 4703
Sfmt 4703
E:\FR\FM\20AUN1.SGM
Chemical
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-diketone.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester.
(G) Polyacrylate oligomer product
from base-catalyzed reaction of
tetraacrylate,
triacrylate,
epoxy
diacrylate and .beta.-ketoester.
(G) Aliphatic urethane diacrylate monomer
from
diisocyanate
and
monoepoxide acrylate ester.
(G) Aliphatic urethane diacrylate monomer
from
diisocyanate
and
monoepoxide acrylate ester
(G) Aliphatic urethane diacrylate monomer
from
diisocyanate
and
monoepoxide acrylate ester
(G) Aliphatic urethane diacrylate monomer
from
diisocyanate
and
monoepoxide acrylate ester
(G) Isocyanate polymer
20AUN1
49194
Federal Register / Vol. 73, No. 162 / Wednesday, August 20, 2008 / Notices
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the TMEs received:
II. 1 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 07/28/08 TO 08/01/08
T–08–0017
07/25/08
Projected
Notice
End Date
Manufacturer/Importer
09/07/08
Received
Date
Case No.
Cytec Industries Inc.
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(G) Coatings resin
(G) Acrylated aliphatic polyurethane
CBI) on the Notices of Commencement
to manufacture received:
III. 18 NOTICES OF COMMENCEMENT FROM: 07/28/08 TO 08/1/08
Case No.
Commencement
Notice End Date
Received Date
P–06–0423
07/31/08
07/18/08
P–07–0639
P–07–0662
07/30/08
07/18/08
07/18/08
06/30/08
P–08–0105
P–08–0114
07/22/08
07/29/08
06/29/08
06/25/08
P–08–0121
P–08–0124
P–08–0209
08/01/08
07/30/08
07/28/08
07/10/08
07/18/08
07/23/08
P–08–0265
08/01/08
07/08/08
P–08–0275
P–08–0310
P–08–0327
P–08–0333
07/18/08
07/24/08
07/23/08
07/25/08
07/07/08
07/19/08
07/14/08
06/28/08
P–08–0335
07/25/08
06/28/08
P–08–0344
P–08–0352
07/18/08
07/28/08
07/10/08
07/17/08
P–08–0384
P–95–0231
07/31/08
07/28/08
07/21/08
02/23/00
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: Augut 13, 2008.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E8–19304 Filed 8–19–08; 8:45 am]
dwashington3 on PRODPC61 with NOTICES
BILLING CODE 6560–50–S
Chemical
(G) 2-Propenoic acid, 2-methyl-, 1,2-ethanediyl ester, telomer with alkyl 2[[(alkylthio)thioxomethyl]thio]-2-methylalkanoate, alkyl methacrylate and me
methacrylate, tert-bu 2-ethylhexaneperoxoate-initiated
(G) Ether carboxylic acid amide
(G) Substituted alkenyl-terminated siloxanes and silicones polymers with substituted acrylates, peroxide initiated
(G) Azo compound
(G) Alkanoic acid, ethenyl ester, polymer with ethenyl acetate and alkyl 2propenoate
(G) Acryloylisocyanate
(G) Quaternary ammonium compound
(G) Poly(oxy-1,2-ethanediyl), .alpha.-bis alkyl substituted hydroxyphenyl ester.omega.-bis alkyl substituted hydroxyphenyl ester
(G) Polymer of isocyanic acid, polymethylene polyphenylene ester, with alkyl
polyamine,
.alpha.-hydro-.gamma.-hydroxypoly[(oxy(methyl-1,2-ethanediyl))
and methyloxirane
(S) Cesium tungsten oxide
(G) Heteromonocycle carboxylic acid, (3-chloro-2-pyridinyl)-oxo-, ethyl ester
(G) Halogenated aromatic ester derivatives
(G) Fatty acids, C18-unsaturated, dimers, polymer with alkyldioic acids, ethylenediamine, dialkylcyclicdiamine, and tall-oil fatty acid
(G) Fatty acids, C18-unsaturated, dimers, polymer with alkyldioic acid, ethylenediamine, dialkyloxydiamine, and tall-oil fatty acid
(S) 1,3-dioxepin, 4,7-dihydro-2-(1,1,4-trimethyl-3-pentenyl yl)(G) Alkyl acrylate polymer with inorganic acid and alkoxyethyl acrylate, alkyl
ester
(G) Vegetable oils, esters with polyols
(G) Polyester resin
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPP–2008–0615; FRL–8378–7]
Petitions to Revoke All Tolerances
Established for Endosulfan; Notice of
Availability
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: This notice asks the public to
comment on requests from the Natural
Resources Defense Council (NRDC) and
Pesticide Action Network North
America (PANNA) that EPA revoke all
tolerances for the organochlorine
pesticide endosulfan. In addition, this
notice solicits information on
endosulfan residues in or on
VerDate Aug<31>2005
15:36 Aug 19, 2008
Jkt 214001
PO 00000
Frm 00036
Fmt 4703
Sfmt 4703
commodities consumed by Alaska
Natives.
DATES: Comments must be received on
or before October 20, 2008.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPP–2008–0615, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Office of Pesticide Programs
(OPP) Regulatory Public Docket (7502P),
Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington,
DC 20460–0001.
• Delivery: OPP Regulatory Public
Docket (7502P), Environmental
Protection Agency, Rm. S–4400, One
Potomac Yard (South Bldg.), 2777 S.
Crystal Dr., Arlington, VA. Deliveries
E:\FR\FM\20AUN1.SGM
20AUN1
Agencies
[Federal Register Volume 73, Number 162 (Wednesday, August 20, 2008)]
[Notices]
[Pages 49189-49194]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-19304]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2008-0628; FRL-8379-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from July 28, 2008 through August 1, 2008, consists of the PMNs
and TME, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before September 19, 2008.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2008-0628, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2008-0628. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
[[Page 49190]]
2008-0628. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
https://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at https://
www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from July 28, 2008 through August 1,
2008, consists of the PMNs and TME, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TME, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number
[[Page 49191]]
assigned to the PMN; the date the PMN was received by EPA; the
projected end date for EPA's review of the PMN; the submitting
manufacturer; the potential uses identified by the manufacturer in the
PMN; and the chemical identity.
I. 65 Premanufacture Notices Received From: 07/28/08 to 08/01/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0547 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use urethane block
copolymer compound
with unsaturated
fatty acids
P-08-0548 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified
polyurethane
P-08-0549 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified
polydimethylsiloxane
P-08-0550 07/21/08 10/18/08 Honeywell Specialty (G) Foam additive (S) 1-propene,
Materials 1,3,3,3-tetrafluoro-
, (1E)-
P-08-0551 07/21/08 10/18/08 Honeywell Specialty (S) Chemical (S) 1-propene,
Materials intermediate (as CIS- 1,3,3,3-tetrafluoro-
isomer) , (1Z)-
P-08-0552 07/21/08 10/18/08 CBI (G) Industrial wood (G) Multifunctional
coating acrylate
P-08-0553 07/21/08 10/18/08 CBI (G) industrial wood (G) Polycarbonate
applications polyurethane
acrylate oligomer
P-08-0554 07/22/08 10/19/08 CBI (G) Aqueous (G) Aqueous
polyurethane rubber polyurethane
coating resin for dispersion
open, non-dispersive
use
P-08-0555 07/24/08 10/21/08 CBI (G) Polymer used in (G) Polymer of
electronics aromatic
manufacture dianhydride,
aromatic diamine and
polysiloxanediamine.
P-08-0556 07/28/08 10/25/08 CBI (G) Open non- (G) Aromatic
dispersive prepolymer based on
TDI
P-08-0557 07/25/08 10/22/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated
aliphatic
polyurethane
P-08-0558 07/28/08 10/25/08 CBI (S) Polyurethane (G) Polyurethane
acrylate used in the acrylate
manufacture of ultra
violet curable
coatings
P-08-0559 07/28/08 10/25/08 CBI (G) Chemical (G) Aliphatic
intermediate ketoxime
P-08-0560 07/29/08 10/26/08 DIC International, (G) Additive for (G) Modified
LLC. lubricants polyalkyldiene
polymer
P-08-0561 07/29/08 10/26/08 CBI (S) Ingredient in (G) Cycloaklyl
fragrance compound piperonyl ether
P-08-0562 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
sodium salts
P-08-0563 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
potassium salts
P-08-0564 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
calcium salts
P-08-0565 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
ammonium salts
P-08-0566 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, sodium
salts
P-08-0567 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, potassium
salts
P-08-0568 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, calcium
salts
P-08-0569 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, ammonium
salts
P-08-0570 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, polymd.,
oxidized, sodium
salts
P-08-0571 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and acrylate
P-08-0572 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, ammonium
salt
P-08-0573 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, sodium
salt
P-08-0574 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, potassium
salt
P-08-0575 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, compound
with amino alcohol
P-08-0576 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, compound
with amino alcohol
[[Page 49192]]
P-08-0577 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0578 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0579 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0580 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0581 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating,ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0582 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0583 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0584 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0585 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0586 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0587 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0588 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0589 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0590 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0591 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0592 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0593 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
[[Page 49193]]
P-08-0594 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0595 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0596 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0597 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0598 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0599 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0600 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0601 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0602 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0603 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0604 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0605 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0606 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0607 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic
adhesive urethane diacrylate
monomer from
diisocyanate and
monoepoxide acrylate
ester.
P-08-0608