Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods: Designation of a New Reference Method, 40866-40867 [E8-16267]

Download as PDF 40866 Federal Register / Vol. 73, No. 137 / Wednesday, July 16, 2008 / Notices via the Internet. See 18 CFR 385.2001(a)(1)(iii) and the instructions on the Commission’s Web site under the ‘‘e-Filing’’ link. If unable to be filed electronically, documents may be paperfiled. To paper-file, an original and eight copies should be mailed to: Kimberly D. Bose, Secretary, Federal Energy Regulatory Commission, 888 First Street, NE., Washington, DC 20426. For more information on how to submit these types of filings please go to the Commission’s Web site located at https://www.ferc.gov/filingcomments.asp. More information about this project can be viewed or printed on the ‘‘eLibrary’’ link of the Commission’s Web site at https://www.ferc.gov/docsfiling/elibrary.asp. Enter the docket number (P–13227) in the docket number field to access the document. For assistance, call toll-free 1–866–208– 3372. Kimberly D. Bose, Secretary. [FR Doc. E8–16206 Filed 7–15–08; 8:45 am] BILLING CODE 6717–01–P ENVIRONMENTAL PROTECTION AGENCY [FRL–8693–6] Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods: Designation of a New Reference Method Environmental Protection Agency. ACTION: Notice of the designation of a new reference method for monitoring ambient air quality. AGENCY: SUMMARY: Notice is hereby given that the Environmental Protection Agency (EPA) has designated, in accordance with 40 CFR part 53, a new reference method for measuring concentrations of carbon monoxide (CO) in the ambient air. FOR FURTHER INFORMATION CONTACT: Surender Kaushik, Human Exposure and Atmospheric Sciences Division (MD-D205–03), National Exposure Research Laboratory, U.S. EPA, Research Triangle Park, North Carolina 27711. Phone: (919) 541–5691, e-mail: Kaushik.Surender@epa.gov. In accordance with regulations at 40 CFR part 53, the EPA evaluates various methods for monitoring the concentrations of those ambient air pollutants for which EPA has established National Ambient Air Quality Standards (NAAQSs) as set mstockstill on PROD1PC66 with NOTICES SUPPLEMENTARY INFORMATION: VerDate Aug<31>2005 17:00 Jul 15, 2008 Jkt 214001 forth in 40 CFR part 50. Monitoring methods that are determined to meet specific requirements for adequacy are designated by the EPA as either reference methods or equivalent methods (as applicable), thereby permitting their use under 40 CFR part 58 by States and other agencies for determining attainment of the NAAQSs. The EPA hereby announces the designation of a new reference method for measuring concentrations of CO in the ambient air. This designation is made under the provisions of 40 CFR part 53, as amended on December 18, 2006 (71 FR 61271). The new reference method for CO is an automated method that utilizes the measurement principle based on nondispersive infrared adsorption photometry (combined with gas filter correlation) and the calibration procedure specified in Appendix C of 40 CFR part 50. The newly designated reference method is identified as follows: RFCA–0708–172, ‘‘SIR, S.A. Model S–5006 Ambient CO Analyzer,’’ operated with full scale fixed measurement ranges 0–50 ppm at any environment temperature in the range of 20 °C to 30 °C. An application for a reference method determination for the candidate method was received by the EPA on April 29, 2008. The sampler is commercially available from the applicant, SIR, S.A., Avenida de la Industria, 3, 28760 Tres Cantos, Madrid, Spain. A test analyzer representative of this method has been tested in accordance with the applicable test procedures specified in 40 CFR part 53 (as amended on December 18, 2006). After reviewing the results of those tests and other information submitted by the applicant in the application, EPA has determined, in accordance with part 53, that this method should be designated as a reference method. The information submitted by the applicant in the application will be kept on file, either at EPA’s National Exposure Research Laboratory, Research Triangle Park, North Carolina 27711 or in an approved archive storage facility, and will be available for inspection (with advance notice) to the extent consistent with 40 CFR part 2 (EPA’s regulations implementing the Freedom of Information Act). As a designated reference method, this method is acceptable for use by states and other air monitoring agencies under the requirements of 40 CFR part 58, Ambient Air Quality Surveillance. For such purposes, the method must be used in strict accordance with the operation or instruction manual PO 00000 Frm 00037 Fmt 4703 Sfmt 4703 associated with the method and subject to any specifications and limitations (e.g. , configuration or operational settings) specified in the applicable designation method description (see the identifications of the method above). Use of the method should also be in general accordance with the guidance and recommendations of applicable sections of the ‘‘Quality Assurance Handbook for Air Pollution Measurement Systems, Volume I,’’ EPA/ 600/R–94/038a and ‘‘Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II, Part 1,’’ EPA–454/R–98–004 (available at https://www.epa.gov/ttn/amtic/ qabook.html ). Vendor modifications of a designated reference method used for purposes of part 58 are permitted only with prior approval of the EPA, as provided in part 53. Provisions concerning modification of such methods by users are specified under Section 2.8 (Modifications of Methods by Users) of Appendix C to 40 CFR part 58. In general, a method designation applies to any sampler or analyzer which is identical to the sampler or analyzer described in the application for designation. In some cases, similar samplers or analyzers manufactured prior to the designation may be upgraded or converted (e.g., by minor modification or by substitution of the approved operation or instruction manual) so as to be identical to the designated method and thus achieve designated status. The manufacturer should be consulted to determine the feasibility of such upgrading or conversion. Part 53 requires that sellers of designated reference or equivalent method analyzers or samplers comply with certain conditions. These conditions are specified in 40 CFR 53.9 and are summarized below: (a) A copy of the approved operation or instruction manual must accompany the sampler or analyzer when it is delivered to the ultimate purchaser. (b) The sampler or analyzer must not generate any unreasonable hazard to operators or to the environment. (c) The sampler or analyzer must function within the limits of the applicable performance specifications given in 40 CFR parts 50 and 53 for at least one year after delivery when maintained and operated in accordance with the operation or instruction manual. (d) Any sampler or analyzer offered for sale as part of a reference or equivalent method must bear a label or sticker indicating that it has been designated as part of a reference or E:\FR\FM\16JYN1.SGM 16JYN1 mstockstill on PROD1PC66 with NOTICES Federal Register / Vol. 73, No. 137 / Wednesday, July 16, 2008 / Notices equivalent method in accordance with part 53 and showing its designated method identification number. (e) If such an analyzer has two or more selectable ranges, the label or sticker must be placed in close proximity to the range selector and indicate which range or ranges have been included in the reference or equivalent method designation. (f) An applicant who offers samplers or analyzers for sale as part of a reference or equivalent method is required to maintain a list of ultimate purchasers of such samplers or analyzers and to notify them within 30 days if a reference or equivalent method designation applicable to the method has been canceled or if adjustment of the sampler or analyzer is necessary under 40 CFR 53.11(b) to avoid a cancellation. (g) An applicant who modifies a sampler or analyzer previously designated as part of a reference or equivalent method is not permitted to sell the sampler or analyzer (as modified) as part of a reference or equivalent method (although it may be sold without such representation), nor to attach a designation label or sticker to the sampler or analyzer (as modified) under the provisions described above, until the applicant has received notice under 40 CFR part 53.14(c) that the original designation or a new designation applies to the method as modified, or until the applicant has applied for and received notice under 40 CFR 53.8(b) of a new reference or equivalent method determination for the sampler or analyzer as modified. Aside from occasional breakdowns or malfunctions, consistent or repeated noncompliance with any of these conditions should be reported to: Director, Human Exposure and Atmospheric Sciences Division (MD– E205–01), National Exposure Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina 27711. Designation of this new equivalent method is intended to assist the States in establishing and operating their air quality surveillance systems under 40 CFR part 58. Questions concerning the commercial availability or technical aspects of the method should be directed to the applicant. Jewel F. Morris, Acting Director, National Exposure Research Laboratory. [FR Doc. E8–16267 Filed 7–15–08; 8:45 am] BILLING CODE 6560–50–P VerDate Aug<31>2005 17:00 Jul 15, 2008 Jkt 214001 ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OPPT–2008–0534; FRL–8373–7] Certain New Chemicals; Receipt and Status Information Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 1, 2008 through June 20, 2008, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before August 15, 2008. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA–HQ–OPPT–2008–0534, by one of the following methods: • Federal eRulemaking Portal: https:// www.regulations.gov. Follow the on-line instructions for submitting comments. • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460– 0001. • Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA–HQ–OPPT–2008–0534. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564–8930. Such deliveries are only accepted during the DCO’s normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA–HQ–OPPT– PO 00000 Frm 00038 Fmt 4703 Sfmt 4703 40867 2008–0534. EPA’s policy is that all comments received will be included in the docket without change and may be made available on-line at https:// www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or email. The regulations.gov website is an ‘‘anonymous access’’ system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA’s public docket, visit the EPA Docket Center homepage at https:// www.epa.gov/epahome/dockets.htm. Docket: All documents in the docket are listed in the docket index available in regulations.gov. To access the electronic docket, go to https:// www.regulations.gov, select ‘‘Advanced Search,’’ then ‘‘Docket Search.’’ Insert the docket ID number where indicated and select the ‘‘Submit’’ button. Follow the instructions on the regulations.gov website to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at https://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding E:\FR\FM\16JYN1.SGM 16JYN1

Agencies

[Federal Register Volume 73, Number 137 (Wednesday, July 16, 2008)]
[Notices]
[Pages 40866-40867]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-16267]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[FRL-8693-6]


Office of Research and Development; Ambient Air Monitoring 
Reference and Equivalent Methods: Designation of a New Reference Method

AGENCY: Environmental Protection Agency.

ACTION: Notice of the designation of a new reference method for 
monitoring ambient air quality.

-----------------------------------------------------------------------

SUMMARY: Notice is hereby given that the Environmental Protection 
Agency (EPA) has designated, in accordance with 40 CFR part 53, a new 
reference method for measuring concentrations of carbon monoxide (CO) 
in the ambient air.

FOR FURTHER INFORMATION CONTACT: Surender Kaushik, Human Exposure and 
Atmospheric Sciences Division (MD-D205-03), National Exposure Research 
Laboratory, U.S. EPA, Research Triangle Park, North Carolina 27711. 
Phone: (919) 541-5691, e-mail: Kaushik.Surender@epa.gov.

SUPPLEMENTARY INFORMATION: In accordance with regulations at 40 CFR 
part 53, the EPA evaluates various methods for monitoring the 
concentrations of those ambient air pollutants for which EPA has 
established National Ambient Air Quality Standards (NAAQSs) as set 
forth in 40 CFR part 50. Monitoring methods that are determined to meet 
specific requirements for adequacy are designated by the EPA as either 
reference methods or equivalent methods (as applicable), thereby 
permitting their use under 40 CFR part 58 by States and other agencies 
for determining attainment of the NAAQSs.
    The EPA hereby announces the designation of a new reference method 
for measuring concentrations of CO in the ambient air. This designation 
is made under the provisions of 40 CFR part 53, as amended on December 
18, 2006 (71 FR 61271).
    The new reference method for CO is an automated method that 
utilizes the measurement principle based on non-dispersive infrared 
adsorption photometry (combined with gas filter correlation) and the 
calibration procedure specified in Appendix C of 40 CFR part 50. The 
newly designated reference method is identified as follows:

    RFCA-0708-172, ``SIR, S.A. Model S-5006 Ambient CO Analyzer,'' 
operated with full scale fixed measurement ranges 0-50 ppm at any 
environment temperature in the range of 20 [deg]C to 30 [deg]C.

    An application for a reference method determination for the 
candidate method was received by the EPA on April 29, 2008. The sampler 
is commercially available from the applicant, SIR, S.A., Avenida de la 
Industria, 3, 28760 Tres Cantos, Madrid, Spain.
    A test analyzer representative of this method has been tested in 
accordance with the applicable test procedures specified in 40 CFR part 
53 (as amended on December 18, 2006). After reviewing the results of 
those tests and other information submitted by the applicant in the 
application, EPA has determined, in accordance with part 53, that this 
method should be designated as a reference method. The information 
submitted by the applicant in the application will be kept on file, 
either at EPA's National Exposure Research Laboratory, Research 
Triangle Park, North Carolina 27711 or in an approved archive storage 
facility, and will be available for inspection (with advance notice) to 
the extent consistent with 40 CFR part 2 (EPA's regulations 
implementing the Freedom of Information Act).
    As a designated reference method, this method is acceptable for use 
by states and other air monitoring agencies under the requirements of 
40 CFR part 58, Ambient Air Quality Surveillance. For such purposes, 
the method must be used in strict accordance with the operation or 
instruction manual associated with the method and subject to any 
specifications and limitations (e.g. , configuration or operational 
settings) specified in the applicable designation method description 
(see the identifications of the method above).
    Use of the method should also be in general accordance with the 
guidance and recommendations of applicable sections of the ``Quality 
Assurance Handbook for Air Pollution Measurement Systems, Volume I,'' 
EPA/600/R-94/038a and ``Quality Assurance Handbook for Air Pollution 
Measurement Systems, Volume II, Part 1,'' EPA-454/R-98-004 (available 
at https://www.epa.gov/ttn/amtic/qabook.html ). Vendor modifications of 
a designated reference method used for purposes of part 58 are 
permitted only with prior approval of the EPA, as provided in part 53. 
Provisions concerning modification of such methods by users are 
specified under Section 2.8 (Modifications of Methods by Users) of 
Appendix C to 40 CFR part 58.
    In general, a method designation applies to any sampler or analyzer 
which is identical to the sampler or analyzer described in the 
application for designation. In some cases, similar samplers or 
analyzers manufactured prior to the designation may be upgraded or 
converted (e.g., by minor modification or by substitution of the 
approved operation or instruction manual) so as to be identical to the 
designated method and thus achieve designated status. The manufacturer 
should be consulted to determine the feasibility of such upgrading or 
conversion.
    Part 53 requires that sellers of designated reference or equivalent 
method analyzers or samplers comply with certain conditions. These 
conditions are specified in 40 CFR 53.9 and are summarized below:
    (a) A copy of the approved operation or instruction manual must 
accompany the sampler or analyzer when it is delivered to the ultimate 
purchaser.
    (b) The sampler or analyzer must not generate any unreasonable 
hazard to operators or to the environment.
    (c) The sampler or analyzer must function within the limits of the 
applicable performance specifications given in 40 CFR parts 50 and 53 
for at least one year after delivery when maintained and operated in 
accordance with the operation or instruction manual.
    (d) Any sampler or analyzer offered for sale as part of a reference 
or equivalent method must bear a label or sticker indicating that it 
has been designated as part of a reference or

[[Page 40867]]

equivalent method in accordance with part 53 and showing its designated 
method identification number.
    (e) If such an analyzer has two or more selectable ranges, the 
label or sticker must be placed in close proximity to the range 
selector and indicate which range or ranges have been included in the 
reference or equivalent method designation.
    (f) An applicant who offers samplers or analyzers for sale as part 
of a reference or equivalent method is required to maintain a list of 
ultimate purchasers of such samplers or analyzers and to notify them 
within 30 days if a reference or equivalent method designation 
applicable to the method has been canceled or if adjustment of the 
sampler or analyzer is necessary under 40 CFR 53.11(b) to avoid a 
cancellation.
    (g) An applicant who modifies a sampler or analyzer previously 
designated as part of a reference or equivalent method is not permitted 
to sell the sampler or analyzer (as modified) as part of a reference or 
equivalent method (although it may be sold without such 
representation), nor to attach a designation label or sticker to the 
sampler or analyzer (as modified) under the provisions described above, 
until the applicant has received notice under 40 CFR part 53.14(c) that 
the original designation or a new designation applies to the method as 
modified, or until the applicant has applied for and received notice 
under 40 CFR 53.8(b) of a new reference or equivalent method 
determination for the sampler or analyzer as modified.
    Aside from occasional breakdowns or malfunctions, consistent or 
repeated noncompliance with any of these conditions should be reported 
to: Director, Human Exposure and Atmospheric Sciences Division (MD-
E205-01), National Exposure Research Laboratory, U.S. Environmental 
Protection Agency, Research Triangle Park, North Carolina 27711.
    Designation of this new equivalent method is intended to assist the 
States in establishing and operating their air quality surveillance 
systems under 40 CFR part 58. Questions concerning the commercial 
availability or technical aspects of the method should be directed to 
the applicant.

Jewel F. Morris,
Acting Director, National Exposure Research Laboratory.
[FR Doc. E8-16267 Filed 7-15-08; 8:45 am]
BILLING CODE 6560-50-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.