Notice of Issuance of Regulatory Guide, 39993 [E8-15787]
Download as PDF
Federal Register / Vol. 73, No. 134 / Friday, July 11, 2008 / Notices
Weapons Division, China Lake to
Unrestricted Use, dated February 8,
2008 (ML080650464), and
9. New World Technology, Final
Status Survey Report, Building 5,
Michelson Laboratory, Room 1613,
Naval Air Warfare Center Weapons
Division, China Lake, CA, dated
November 16, 2007 (ML080650470,
ML080650474, and ML080650481).
If you do not have access to ADAMS,
or if there are problems in accessing the
documents located in ADAMS, contact
the NRC Public Document Room (PDR)
Reference staff at 1–800–397–4209, 301–
415–4737, or by e-mail to pdr@nrc.gov.
These documents may also be viewed
electronically on the public computers
located at the NRC’s PDR, O 1 F21, One
White Flint North, 11555 Rockville
Pike, Rockville, MD 20852. The PDR
reproduction contractor will copy
documents for a fee.
Dated at King of Prussia, Pennsylvania this
1st day of July 2008.
For the Nuclear Regulatory Commission.
Marie Miller,
Chief, Materials Security and Industrial
Branch, Division of Nuclear Materials Safety,
Region I.
[FR Doc. E8–15793 Filed 7–10–08; 8:45 am]
BILLING CODE 7590–01–P
NUCLEAR REGULATORY
COMMISSION
Notice of Issuance of Regulatory Guide
Nuclear Regulatory
Commission.
ACTION: Notice of Issuance and
Availability of Regulatory Guide 6.5,
Revision 1.
AGENCY:
II. Further Information
FOR FURTHER INFORMATION CONTACT:
Mark Orr, Regulatory Guide
Development Branch, Division of
Engineering, Office of Nuclear
Regulatory Research, U.S. Nuclear
Regulatory Commission, Washington,
DC 20555–0001, telephone (301) 415–
6373 or e-mail to Mark.Orr@nrc.gov.
SUPPLEMENTARY INFORMATION:
pwalker on PROD1PC71 with NOTICES
I. Introduction
The U.S. Nuclear Regulatory
Commission (NRC) is issuing a revision
to an existing guide in the agency’s
‘‘Regulatory Guide’’ series. This series
was developed to describe and make
available to the public information such
as methods that are acceptable to the
NRC staff for implementing specific
parts of the agency’s regulations,
techniques that the staff uses in
evaluating specific problems or
postulated accidents, and data that the
VerDate Aug<31>2005
17:19 Jul 10, 2008
Jkt 214001
staff needs in its review of applications
for permits and licenses.
Revision 1 of Regulatory Guide 6.5,
‘‘General Safety Standards for
Installations Using Nonmedical Sealed
Gamma-Ray Sources,’’ was issued with
a temporary identification as Draft
Regulatory Guide DG–6006. This guide
directs the reader to the type of
information acceptable to the NRC staff
to approve the initial transfer of devices
containing byproduct material to
persons generally licensed under Title
10, Section 31.5, ‘‘Certain Detecting,
Measuring, Gauging, or Controlling
Devices, and Certain Devices for
Producing Light or an Ionized
Atmosphere,’’ of the Code of Federal
Regulations (10 CFR 31.5) or equivalent
regulations of an Agreement State.
The requirements for transferring
gamma-ray sources to general licensees
appear in 10 CFR 32.51, ‘‘Byproduct
Material Contained in Devices for Use
Under § 31.5; Requirements for License
to Manufacturer, or Initially Transfer’’.
One method of complying with the
requirements of 10 CFR 32.51 appears in
NUREG–1556, Volume 3, ‘‘Consolidated
Guidance about Materials Licenses:
Applications for Sealed Source and
Device Evaluation and Registration.’’
This regulatory guide endorses the
description of the information to be
submitted in the application for the
initial transfer and installation of sealed
gamma-ray sources contained in the
current revision of Volume 3 of
NUREG–1556 as a method acceptable to
the NRC staff.
In January 2008, DG–6006 was
published with a public comment
period of 60 days from the issuance of
the guide. No comments were received
and the public comment period closed
on April 18, 2008. Electronic copies of
Regulatory Guide 6.5, Revision 1 are
available through the NRC’s public Web
site under ‘‘Regulatory Guides’’ at
https://www.nrc.gov/reading-rm/doccollections/.
In addition, regulatory guides are
available for inspection at the NRC’s
Public Document Room (PDR), which is
located at Room O–1F21, One White
Flint North, 11555 Rockville Pike,
Rockville, Maryland 20852–2738. The
PDR’s mailing address is USNRC PDR,
Washington, DC 20555–0001. The PDR
can also be reached by telephone at
(301) 415–4737 or (800) 397–4209, by
fax at (301) 415–3548, and by e-mail to
pdr@nrc.gov.
Regulatory guides are not
copyrighted, and NRC approval is not
required to reproduce them.
PO 00000
Frm 00056
Fmt 4703
Sfmt 4703
39993
Dated at Rockville, Maryland, this 3rd day
of July, 2008.
For the Nuclear Regulatory Commission.
Stephen C. O’Connor,
Acting Chief, Regulatory Guide Development
Branch, Division of Engineering, Office of
Nuclear Regulatory Research.
[FR Doc. E8–15787 Filed 7–10–08; 8:45 am]
BILLING CODE 7590–01–P
NUCLEAR REGULATORY
COMMISSION
Notice of Issuance of Regulatory Guide
Nuclear Regulatory
Commission.
ACTION: Notice of Issuance and
Availability of Regulatory Guide 10.5,
Revision 2.
AGENCY:
FOR FURTHER INFORMATION CONTACT:
Mark Orr, Regulatory Guide
Development Branch, Division of
Engineering, Office of Nuclear
Regulatory Research, U.S. Nuclear
Regulatory Commission, Washington,
DC 20555–0001, telephone (301) 415–
6373 or e-mail to Mark.Orr@nrc.gov.
SUPPLEMENTARY INFORMATION:
I. Introduction
The U.S. Nuclear Regulatory
Commission (NRC) is issuing a revision
to an existing guide in the agency’s
‘‘Regulatory Guide’’ series. This series
was developed to describe and make
available to the public information such
as methods that are acceptable to the
NRC staff for implementing specific
parts of the agency’s regulations,
techniques that the staff uses in
evaluating specific problems or
postulated accidents, and data that the
staff needs in its review of applications
for permits and licenses.
Revision 2 of Regulatory Guide 10.5,
‘‘Applications for a Type A License of
Broad Scope,’’ was issued with a
temporary identification as Draft
Regulatory Guide DG–0015. This guide
directs the reader to the type of
information needed by the NRC staff to
evaluate an application for a Type A
license of broad scope for byproduct
material. Title 10, Part 33, ‘‘Specific
Domestic Licenses of Broad Scope for
Byproduct Material,’’ of the Code of
Federal Regulations (10 CFR Part 33)
regulates this type of license.
This regulatory guide endorses the
methods and procedures contained in
the current revision of NUREG–1556,
Volume 11, ‘‘Consolidated Guidance
about Materials Licenses: ProgramSpecific Guidance about Licenses of
Broad Scope,’’ as a process that the NRC
staff finds acceptable for meeting the
E:\FR\FM\11JYN1.SGM
11JYN1
Agencies
[Federal Register Volume 73, Number 134 (Friday, July 11, 2008)]
[Notices]
[Page 39993]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-15787]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
Notice of Issuance of Regulatory Guide
AGENCY: Nuclear Regulatory Commission.
ACTION: Notice of Issuance and Availability of Regulatory Guide 6.5,
Revision 1.
-----------------------------------------------------------------------
FOR FURTHER INFORMATION CONTACT: Mark Orr, Regulatory Guide Development
Branch, Division of Engineering, Office of Nuclear Regulatory Research,
U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001,
telephone (301) 415-6373 or e-mail to Mark.Orr@nrc.gov.
SUPPLEMENTARY INFORMATION:
I. Introduction
The U.S. Nuclear Regulatory Commission (NRC) is issuing a revision
to an existing guide in the agency's ``Regulatory Guide'' series. This
series was developed to describe and make available to the public
information such as methods that are acceptable to the NRC staff for
implementing specific parts of the agency's regulations, techniques
that the staff uses in evaluating specific problems or postulated
accidents, and data that the staff needs in its review of applications
for permits and licenses.
Revision 1 of Regulatory Guide 6.5, ``General Safety Standards for
Installations Using Nonmedical Sealed Gamma-Ray Sources,'' was issued
with a temporary identification as Draft Regulatory Guide DG-6006. This
guide directs the reader to the type of information acceptable to the
NRC staff to approve the initial transfer of devices containing
byproduct material to persons generally licensed under Title 10,
Section 31.5, ``Certain Detecting, Measuring, Gauging, or Controlling
Devices, and Certain Devices for Producing Light or an Ionized
Atmosphere,'' of the Code of Federal Regulations (10 CFR 31.5) or
equivalent regulations of an Agreement State.
The requirements for transferring gamma-ray sources to general
licensees appear in 10 CFR 32.51, ``Byproduct Material Contained in
Devices for Use Under Sec. 31.5; Requirements for License to
Manufacturer, or Initially Transfer''. One method of complying with the
requirements of 10 CFR 32.51 appears in NUREG-1556, Volume 3,
``Consolidated Guidance about Materials Licenses: Applications for
Sealed Source and Device Evaluation and Registration.''
This regulatory guide endorses the description of the information
to be submitted in the application for the initial transfer and
installation of sealed gamma-ray sources contained in the current
revision of Volume 3 of NUREG-1556 as a method acceptable to the NRC
staff.
II. Further Information
In January 2008, DG-6006 was published with a public comment period
of 60 days from the issuance of the guide. No comments were received
and the public comment period closed on April 18, 2008. Electronic
copies of Regulatory Guide 6.5, Revision 1 are available through the
NRC's public Web site under ``Regulatory Guides'' at https://
www.nrc.gov/reading-rm/doc-collections/.
In addition, regulatory guides are available for inspection at the
NRC's Public Document Room (PDR), which is located at Room O-1F21, One
White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852-
2738. The PDR's mailing address is USNRC PDR, Washington, DC 20555-
0001. The PDR can also be reached by telephone at (301) 415-4737 or
(800) 397-4209, by fax at (301) 415-3548, and by e-mail to pdr@nrc.gov.
Regulatory guides are not copyrighted, and NRC approval is not
required to reproduce them.
Dated at Rockville, Maryland, this 3rd day of July, 2008.
For the Nuclear Regulatory Commission.
Stephen C. O'Connor,
Acting Chief, Regulatory Guide Development Branch, Division of
Engineering, Office of Nuclear Regulatory Research.
[FR Doc. E8-15787 Filed 7-10-08; 8:45 am]
BILLING CODE 7590-01-P