Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Friction Materials Manufacturing (Renewal), EPA ICR Number 2025.04, OMB Control Number 2060-0481, 24067-24068 [E8-9609]
Download as PDF
Federal Register / Vol. 73, No. 85 / Thursday, May 1, 2008 / Notices
call (866) 208–3676 (toll free). For TTY,
call (202) 502–8659.
Nathaniel J. Davis, Sr.,
Deputy Secretary.
[FR Doc. E8–9543 Filed 4–30–08; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2007–0061; FRL–8560–6]
Agency Information Collection
Activities; Submission to OMB for
Review and Approval; Comment
Request; NESHAP for Friction
Materials Manufacturing (Renewal),
EPA ICR Number 2025.04, OMB
Control Number 2060–0481
Environmental Protection
Agency (EPA).
ACTION: Notice.
pwalker on PROD1PC71 with NOTICES
AGENCY:
SUMMARY: In compliance with the
Paperwork Reduction Act (44 U.S.C.
3501 et seq.), this document announces
that an Information Collection Request
(ICR) has been forwarded to the Office
of Management and Budget (OMB) for
review and approval. This is a request
to renew an existing approved
collection. The ICR which is abstracted
below describes the nature of the
collection and the estimated burden and
cost.
DATES: Additional comments may be
submitted on or before June 2, 2008.
ADDRESSES: Submit your comments,
referencing docket ID number EPA–HQ–
OECA–2007–0061, to (1) EPA online
using https://www.regulations.gov (our
preferred method), or by email to
docket.oeca@epa.gov, or by mail to: EPA
Docket Center (EPA/DC), Environmental
Protection Agency, Enforcement and
Compliance Docket and Information
Center, mail code 2201T, 1200
Pennsylvania Avenue, NW.,
Washington, DC 20460, and (2) OMB at:
Office of Information and Regulatory
Affairs, Office of Management and
Budget (OMB), Attention: Desk Officer
for EPA, 725 17th Street, NW.,
Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT:
Learia Williams, Compliance
Assessment and Media Programs
Division, Office of Compliance, Mail
Code 2223A, Environmental Protection
Agency, 1200 Pennsylvania Avenue,
NW., Washington, DC 20460; telephone
number: (202) 564–4113; fax number:
(202) 564–0050; email address:
williams.learia@epa.gov.
SUPPLEMENTARY INFORMATION: EPA has
submitted the following ICR to OMB for
VerDate Aug<31>2005
17:13 Apr 30, 2008
Jkt 214001
review and approval according to the
procedures prescribed in 5 CFR 1320.12.
On March 9, 2007 (72 FR 10735), EPA
sought comments on this ICR pursuant
to 5 CFR 1320.8(d). EPA received no
comments. Any additional comments on
this ICR should be submitted to EPA
and OMB within 30 days of this notice.
The EPA has established a public
docket for this ICR under docket ID
number EPA–HQ–OECA–2007–0061,
which is available for public viewing
online at https://www.regulations.gov, in
person viewing at the Enforcement and
Compliance Docket in the EPA Docket
Center (EPA/DC), EPA West, Room
3334, 1301 Constitution Avenue, NW.,
Washington, DC. The EPA Docket
Center Public Reading Room is open
from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal
holidays. The telephone number for the
Reading Room is (202) 566–1744, and
the telephone number for the
Enforcement and Compliance Docket is
(202) 566–1927.
Use EPA’s electronic docket and
comment system at https://
www.regulations.gov, to submit or view
public comments, access the index
listing of the contents of the docket, and
to access those documents in the docket
that are available electronically. Once in
the system, select ‘‘docket search,’’ then
key in the docket ID number identified
above. Please note that EPA’s policy is
that public comments, whether
submitted electronically or in paper,
will be made available for public
viewing at https://www.regulations.gov,
as EPA receives them and without
change, unless the comment contains
copyrighted material, Confidential
Business Information (CBI), or other
information whose public disclosure is
restricted by statute. For further
information about the electronic docket,
go to https://www.regulations.gov.
Title: NESHAP for Friction Materials
Manufacturing (Renewal).
ICR Numbers: EPA ICR Number
2025.04, OMB Control Number 2060–
0481.
ICR Status: This ICR is scheduled to
expire on July 31, 2008. Under OMB
regulations, the Agency may continue to
either conduct or sponsor the collection
of information while this submission is
pending at OMB. An Agency may not
conduct or sponsor, and a person is not
required to respond to, a collection of
information unless it displays a
currently valid OMB control number.
The OMB control numbers for EPA’s
regulations in title 40 of the CFR, after
appearing in the Federal Register when
approved, are listed in 40 CFR part 9,
and displayed either by publication in
the Federal Register or by other
PO 00000
Frm 00030
Fmt 4703
Sfmt 4703
24067
appropriate means, such as on the
related collection instrument or form, if
applicable. The display of OMB control
numbers in certain EPA regulations is
consolidated in 40 CFR part 9.
Abstract: The National Emission
Standards for Hazardous Air Pollutants
(NESHAP) Reporting and
Recordkeeping Requirements for the
Friction Materials Manufacturing were
proposed on October 4, 2001 (66 FR
50768) and promulgated on October 18,
2002 (67 FR 64498).
These standards apply to any new,
reconstructed, or existing solvent mixers
located at any friction materials
manufacturing facility engaged in the
manufacture of friction materials such
as brake and clutch linings. A friction
materials manufacturing facility is a
major source of hazardous air pollutant
(HAP) if it emits or has the potential to
emit any single HAP at a rate of 9.07
megagrams (10 tons) or more per year or
any combination of HAP at a rate of
22.68 megagrams (25 tons) or more per
year.
Owners or operators must submit
notification reports upon the
construction or reconstruction of any
friction materials manufacturing facility.
Semiannual reports for periods of
operation during which the emission
limitation has exceeded (or reports
certifying that no exceedances have
occurred) also are required. Affected
entities must retain reports and records
for a total of five years: Two years at the
site and the remaining three years at an
off-site location.
Notifications are used to inform the
Agency or delegated authority when a
source becomes subject to the standard.
The reviewing authority may then
inspect the source to ensure that the
pollution control devices are properly
installed and that the operating standard
is being met. The information generated
by monitoring, recordkeeping, and
reporting requirements described in this
ICR are used by the Agency to ensure
that facilities that are affected by the
standard continue to operate the control
equipment and achieve continuous
compliance with the regulation.
An Agency may not conduct or
sponsor, and a person is not required to
respond to, a collection of information
unless it displays a currently valid OMB
Control Number. The OMB Control
Number for EPA’s regulations are listed
in 40 CFR part 9 and 48 CFR chapter 15,
and are identified on the form and/or
instrument, if applicable.
Burden Statement: The annual public
reporting and recordkeeping burden for
this collection of information is
estimated to average 162 hours per
response. Burden means the total time,
E:\FR\FM\01MYN1.SGM
01MYN1
24068
Federal Register / Vol. 73, No. 85 / Thursday, May 1, 2008 / Notices
effort, or financial resources expended
by persons to generate, maintain, retain,
or either disclose or provide information
to or for a Federal agency. This includes
the time needed to review instructions;
develop, acquire, install, and utilize
technology and systems for the purposes
of collecting, validating, and verifying
information, processing and
maintaining information, and disclosing
and providing information; adjust the
existing ways to comply with any
previously applicable instructions and
requirements which have subsequently
changed; train personnel to be able to
respond to a collection of information;
search data sources; complete and
review the collection of information;
and transmit or otherwise disclose the
information.
Respondents/Affected Entities:
Friction materials manufacturing.
Estimated Number of Respondents: 4.
Frequency of Response: Annually,
semiannually, initially and
occasionally.
Estimated Total Annual Hour Burden:
1,296.
Estimated Total Annual Cost:
$104,512, which is comprised of $1,088
in O&M costs, $103,424 in labor costs,
and no annualized capital costs.
Changes in the Estimates: There is no
change in the labor hours or cost in this
ICR compared to the previous ICR
except for the correction of a small
mathematical error in the previous ICR.
This is due to two considerations: (1)
The regulations have not changed over
the past three years and are not
anticipated to change over the next
three years; and (2) the growth rate for
the industry is very low, negative or
non-existent, so there is no significant
change in the overall burden.
Since there are no changes in the
regulatory requirements and there is no
significant industry growth, the labor
hours and cost figures in the previous
ICR are used in this ICR and there is no
change in burden to industry.
Dated: April 24, 2008.
Sara Hisel-McCoy,
Director, Collection Strategies Division.
[FR Doc. E8–9609 Filed 4–30–08; 8:45 am]
pwalker on PROD1PC71 with NOTICES
BILLING CODE 6560–50–P
VerDate Aug<31>2005
17:13 Apr 30, 2008
Jkt 214001
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2007–0062; FRL–8560–7]
Agency Information Collection
Activities; Submission to OMB for
Review and Approval; Comment
Request; NESHAP for Cellulose
Products Manufacturing (Renewal),
EPA ICR Number 1974.05, OMB
Control Number 2060–0488
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: In compliance with the
Paperwork Reduction Act (44 U.S.C.
3501 et seq.), this document announces
that an Information Collection Request
(ICR) has been forwarded to the Office
of Management and Budget (OMB) for
review and approval. This is a request
to renew an existing approved
collection. The ICR which is abstracted
below describes the nature of the
collection and the estimated burden and
cost.
DATES: Additional comments may be
submitted on or before June 2, 2008.
ADDRESSES: Submit your comments,
referencing docket ID number EPA–HQ–
OECA–2007–0062, to: (1) EPA online
using https://www.regulations.gov (our
preferred method), or by e-mail to
docket.oeca@epa.gov, or by mail to: EPA
Docket Center (EPA/DC), Environmental
Protection Agency, Enforcement and
Compliance Docket and Information
Center, mail code 2201T, 1200
Pennsylvania Avenue, NW.,
Washington, DC 20460; and (2) OMB at:
Office of Information and Regulatory
Affairs, Office of Management and
Budget (OMB), Attention: Desk Officer
for EPA, 725 17th Street, NW.,
Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT:
Learia Williams, Compliance
Assessment and Media Programs
Division, Office of Compliance, Mail
Code 2223A, Environmental Protection
Agency, 1200 Pennsylvania Avenue,
NW., Washington, DC 20460; telephone
number: (202) 564–4113; fax number:
(202) 564–0050; e-mail address:
williams.learia@epa.gov.
EPA has
submitted the following ICR to OMB for
review and approval according to the
procedures prescribed in 5 CFR 1320.12.
On March 9, 2007 (72 FR 10735), EPA
sought comments on this ICR pursuant
to 5 CFR 1320.8(d). EPA received no
comments. Any additional comments on
this ICR should be submitted to EPA
and OMB within 30 days of this notice.
SUPPLEMENTARY INFORMATION:
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
EPA has established a public docket
for this ICR under docket ID number
EPA–HQ–OECA–2007–0062, which is
available for public viewing online at
https://www.regulations.gov, in person
viewing at the Enforcement and
Compliance Docket in the EPA Docket
Center (EPA/DC), EPA West, Room
3334, 1301 Constitution Avenue, NW.,
Washington, DC. The EPA Docket
Center Public Reading Room is open
from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal
holidays. The telephone number for the
Reading Room is (202) 566–1744, and
the telephone number for the
Enforcement and Compliance Docket is
(202) 566–1927.
Use EPA’s electronic docket and
comment system at https://
www.regulations.gov, to submit or view
public comments, access the index
listing of the contents of the docket, and
to access those documents in the docket
that are available electronically. Once in
the system, select ‘‘docket search,’’ then
key in the docket ID number identified
above. Please note that EPA’s policy is
that public comments, whether
submitted either electronically or in
paper, will be made available for public
viewing at https://www.regulations.gov,
as EPA receives them and without
change, unless the comment contains
copyrighted material, Confidential
Business Information (CBI), or other
information whose public disclosure is
restricted by statute. For further
information about the electronic docket,
go to https://www.regulations.gov.
Title: NESHAP for Cellulose Products
Manufacturing (Renewal).
ICR Numbers: EPA ICR Number
1974.04, OMB Control Number 2060–
0488.
ICR Status: This ICR is schedule to
expire on July 31, 2008. Under OMB
regulations, the Agency may continue to
conduct or sponsor the collection of
information while this submission is
pending at OMB. An Agency may not
conduct or sponsor, and a person is not
required to respond to, a collection of
information unless it displays a
currently valid OMB control number.
The OMB control numbers for EPA’s
regulations in title 40 of the CFR, after
appearing in the Federal Register when
approved, are listed in 40 CFR part 9,
and displayed either by publication in
the Federal Register or by other
appropriate means, such as on the
related collection instrument or form, if
applicable. The display of OMB control
numbers in certain EPA regulations is
consolidated in 40 CFR part 9.
Abstract: The National Emission
Standards for Hazardous Air Pollutants
(NESHAP) for Cellulose Products
E:\FR\FM\01MYN1.SGM
01MYN1
Agencies
[Federal Register Volume 73, Number 85 (Thursday, May 1, 2008)]
[Notices]
[Pages 24067-24068]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-9609]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OECA-2007-0061; FRL-8560-6]
Agency Information Collection Activities; Submission to OMB for
Review and Approval; Comment Request; NESHAP for Friction Materials
Manufacturing (Renewal), EPA ICR Number 2025.04, OMB Control Number
2060-0481
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In compliance with the Paperwork Reduction Act (44 U.S.C. 3501
et seq.), this document announces that an Information Collection
Request (ICR) has been forwarded to the Office of Management and Budget
(OMB) for review and approval. This is a request to renew an existing
approved collection. The ICR which is abstracted below describes the
nature of the collection and the estimated burden and cost.
DATES: Additional comments may be submitted on or before June 2, 2008.
ADDRESSES: Submit your comments, referencing docket ID number EPA-HQ-
OECA-2007-0061, to (1) EPA online using https://www.regulations.gov (our
preferred method), or by email to docket.oeca@epa.gov, or by mail to:
EPA Docket Center (EPA/DC), Environmental Protection Agency,
Enforcement and Compliance Docket and Information Center, mail code
2201T, 1200 Pennsylvania Avenue, NW., Washington, DC 20460, and (2) OMB
at: Office of Information and Regulatory Affairs, Office of Management
and Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street,
NW., Washington, DC 20503.
FOR FURTHER INFORMATION CONTACT: Learia Williams, Compliance Assessment
and Media Programs Division, Office of Compliance, Mail Code 2223A,
Environmental Protection Agency, 1200 Pennsylvania Avenue, NW.,
Washington, DC 20460; telephone number: (202) 564-4113; fax number:
(202) 564-0050; email address: williams.learia@epa.gov.
SUPPLEMENTARY INFORMATION: EPA has submitted the following ICR to OMB
for review and approval according to the procedures prescribed in 5 CFR
1320.12. On March 9, 2007 (72 FR 10735), EPA sought comments on this
ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any
additional comments on this ICR should be submitted to EPA and OMB
within 30 days of this notice.
The EPA has established a public docket for this ICR under docket
ID number EPA-HQ-OECA-2007-0061, which is available for public viewing
online at https://www.regulations.gov, in person viewing at the
Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC),
EPA West, Room 3334, 1301 Constitution Avenue, NW., Washington, DC. The
EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding legal holidays. The telephone
number for the Reading Room is (202) 566-1744, and the telephone number
for the Enforcement and Compliance Docket is (202) 566-1927.
Use EPA's electronic docket and comment system at https://
www.regulations.gov, to submit or view public comments, access the
index listing of the contents of the docket, and to access those
documents in the docket that are available electronically. Once in the
system, select ``docket search,'' then key in the docket ID number
identified above. Please note that EPA's policy is that public
comments, whether submitted electronically or in paper, will be made
available for public viewing at https://www.regulations.gov, as EPA
receives them and without change, unless the comment contains
copyrighted material, Confidential Business Information (CBI), or other
information whose public disclosure is restricted by statute. For
further information about the electronic docket, go to https://
www.regulations.gov.
Title: NESHAP for Friction Materials Manufacturing (Renewal).
ICR Numbers: EPA ICR Number 2025.04, OMB Control Number 2060-0481.
ICR Status: This ICR is scheduled to expire on July 31, 2008. Under
OMB regulations, the Agency may continue to either conduct or sponsor
the collection of information while this submission is pending at OMB.
An Agency may not conduct or sponsor, and a person is not required to
respond to, a collection of information unless it displays a currently
valid OMB control number. The OMB control numbers for EPA's regulations
in title 40 of the CFR, after appearing in the Federal Register when
approved, are listed in 40 CFR part 9, and displayed either by
publication in the Federal Register or by other appropriate means, such
as on the related collection instrument or form, if applicable. The
display of OMB control numbers in certain EPA regulations is
consolidated in 40 CFR part 9.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) Reporting and Recordkeeping Requirements for the
Friction Materials Manufacturing were proposed on October 4, 2001 (66
FR 50768) and promulgated on October 18, 2002 (67 FR 64498).
These standards apply to any new, reconstructed, or existing
solvent mixers located at any friction materials manufacturing facility
engaged in the manufacture of friction materials such as brake and
clutch linings. A friction materials manufacturing facility is a major
source of hazardous air pollutant (HAP) if it emits or has the
potential to emit any single HAP at a rate of 9.07 megagrams (10 tons)
or more per year or any combination of HAP at a rate of 22.68 megagrams
(25 tons) or more per year.
Owners or operators must submit notification reports upon the
construction or reconstruction of any friction materials manufacturing
facility. Semiannual reports for periods of operation during which the
emission limitation has exceeded (or reports certifying that no
exceedances have occurred) also are required. Affected entities must
retain reports and records for a total of five years: Two years at the
site and the remaining three years at an off-site location.
Notifications are used to inform the Agency or delegated authority
when a source becomes subject to the standard. The reviewing authority
may then inspect the source to ensure that the pollution control
devices are properly installed and that the operating standard is being
met. The information generated by monitoring, recordkeeping, and
reporting requirements described in this ICR are used by the Agency to
ensure that facilities that are affected by the standard continue to
operate the control equipment and achieve continuous compliance with
the regulation.
An Agency may not conduct or sponsor, and a person is not required
to respond to, a collection of information unless it displays a
currently valid OMB Control Number. The OMB Control Number for EPA's
regulations are listed in 40 CFR part 9 and 48 CFR chapter 15, and are
identified on the form and/or instrument, if applicable.
Burden Statement: The annual public reporting and recordkeeping
burden for this collection of information is estimated to average 162
hours per response. Burden means the total time,
[[Page 24068]]
effort, or financial resources expended by persons to generate,
maintain, retain, or either disclose or provide information to or for a
Federal agency. This includes the time needed to review instructions;
develop, acquire, install, and utilize technology and systems for the
purposes of collecting, validating, and verifying information,
processing and maintaining information, and disclosing and providing
information; adjust the existing ways to comply with any previously
applicable instructions and requirements which have subsequently
changed; train personnel to be able to respond to a collection of
information; search data sources; complete and review the collection of
information; and transmit or otherwise disclose the information.
Respondents/Affected Entities: Friction materials manufacturing.
Estimated Number of Respondents: 4.
Frequency of Response: Annually, semiannually, initially and
occasionally.
Estimated Total Annual Hour Burden: 1,296.
Estimated Total Annual Cost: $104,512, which is comprised of $1,088
in O&M costs, $103,424 in labor costs, and no annualized capital costs.
Changes in the Estimates: There is no change in the labor hours or
cost in this ICR compared to the previous ICR except for the correction
of a small mathematical error in the previous ICR. This is due to two
considerations: (1) The regulations have not changed over the past
three years and are not anticipated to change over the next three
years; and (2) the growth rate for the industry is very low, negative
or non-existent, so there is no significant change in the overall
burden.
Since there are no changes in the regulatory requirements and there
is no significant industry growth, the labor hours and cost figures in
the previous ICR are used in this ICR and there is no change in burden
to industry.
Dated: April 24, 2008.
Sara Hisel-McCoy,
Director, Collection Strategies Division.
[FR Doc. E8-9609 Filed 4-30-08; 8:45 am]
BILLING CODE 6560-50-P