Notice Pursuant to the National Cooperative Research and Production Act of 1993-High Definition Metrology and Process-2 Micron Manufacturing Under ATP Award No. 70NANB7H7041, 12762 [E8-4394]

Download as PDF 12762 Federal Register / Vol. 73, No. 47 / Monday, March 10, 2008 / Notices (301) 415–1696, E-mail: Robert.Weisman@nrc.gov, and Renee V. Holmes, Esq., Telephone: (301) 415– 3319, E-Mail: Renee.Holmes@nrc.gov. A person who is not a party may be permitted to make a limited appearance by making an oral or written statement of his or her position on the issues at any session of the hearing or any prehearing conference within the limits and conditions fixed by the presiding officer, but may not otherwise participate in the proceeding. Documents may be examined, and/or copied for a fee, at the NRC’s Public Document Room (PDR), located at One White Flint North, Public File Area O1 F21, 11555 Rockville Pike (first floor), Rockville, Maryland, and will be accessible electronically through the Agencywide Documents Access and Management System (ADAMS) Public Electronic Reading Room link at the NRC Web site https://www.nrc.gov/ reading-rm/adams.html. The ADAMS accession number for the application is ML073320913. The application is also available at: https://www.nrc.gov/ reactors/new-licensing/col.html. Persons who do not have access to ADAMS or who encounter problems in accessing documents located in ADAMS should contact the NRC PDR Reference staff by telephone at 1–800–397–4209, or 301– 415–4737, or by e-mail to pdr@nrc.gov. Dated at Rockville, Maryland, this 29th day of February 2008. For the Nuclear Regulatory Commission. Annette L. Vietti-Cook, Secretary of the Commission. [FR Doc. E8–4706 Filed 3–7–08; 8:45 am] BILLING CODE 7590–01–P DEPARTMENT OF JUSTICE pwalker on PROD1PC71 with NOTICES Notice of Lodging of Consent Decree Under the Clean Air Act and the Resource Conservation and Recovery Act Under 28 CFR 50.7, notice is hereby given that on February 20, 2008, a proposed Consent Decree (‘‘Consent Decree’’) in the matter of United States v. Bridgeport United Recycling, Inc. and United Oil Recovery, Inc., Civil Action No. 3:08CV247 (JBA), was lodged with the United States District Court for the District of Connecticut. In the complaint in this matter, the United States sought injunctive relief and penalties against Bridgeport United Recycling, Inc. (‘‘BUR’’) and United Oil Recovery, Inc. (‘‘UOR’’) for claims arising under the Resource Conservation and Recovery Act (‘‘RCRA’’), 42 U.S.C. 6901 et seq., in connection with the VerDate Aug<31>2005 16:39 Mar 07, 2008 Jkt 214001 operation of BUR’s hazardous waste treatment, storage, and disposal facility located in Bridgeport, Connecticut and UOR’s hazardous waste treatment, storage, and disposal facility located in Meriden, Connecticut. Under the Consent Decree, BUR will automate and upgrade the air emission control system used at the Bridgeport facility and pay a civil penalty of $205,798.00. Under the Consent Decree, UOR will pay a civil penalty of $119,392.00. The Department of Justice will receive for a period of thirty (30) days from the date of this publication comments relating to the Consent Decree. Comments should be addressed to the Assistant Attorney General, Environment and Natural Resources Division, and either emailed to pubcomment-ees.enrd@usdoj.gov or mailed to P.O. Box 7611, U.S. Department of Justice, Washington, DC 20044–7611, and should refer to United States v. Bridgeport United Recycling, Inc. and United Oil Recovery, Inc., D.J. Ref. No. 90–7–1–08350. Commenters may request an opportunity for a public meeting in the affected area, in accordance with Section 7003(d) of RCRA, 42 U.S.C. 6973(d). The Consent Decree may be examined at the Office of the United States Attorney, Connecticut Financial Center, 157 Church Street, Floor 23, New Haven, CT 06510, and at U.S. EPA Region I, Robert F. Kennedy Federal Building, Boston, Massachusetts 02203– 2211. During the public comment period, the Consent Decree may also be examined on the following Department of Justice Web site: https:// www.usdoj.gov/enrd/ Consent_Decrees.html. A copy of the Consent Decree may also be obtained by mail from the Consent Decree Library, P.O. Box 7611, U.S. Department of Justice, Washington, DC 20044–7611, or by faxing or e-mailing a request to Tonia Fleetwood (tonia.fleetwood@usdoj.gov), fax number (202) 514–0097, phone confirmation number (202) 514–1547. In requesting a copy from the Consent Decree Library, please enclose a check in the amount of $8.00 (25 cents per page reproduction cost) payable to the U.S. Treasury, or, if by email or fax, forward a check in that amount to the Consent Decree Library at the stated address. Maureen Katz, Assistant Section Chief, Environmental Enforcement Section, Environment and Natural Resources Division. [FR Doc. E8–4608 Filed 3–7–08; 8:45 am] BILLING CODE 4410–CW–P PO 00000 Frm 00061 Fmt 4703 Sfmt 4703 DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993—High Definition Metrology and Process–2 Micron Manufacturing Under ATP Award No. 70NANB7H7041 Notice is hereby given that, on December 13, 2007, pursuant to section 6(a) of the National Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et seq. (‘‘the Act’’), High Definition Metrology and Process–2 Micron Manufacturing under ATP Award No.70NANB7H7041 has filed written notifications simultaneously with the Attorney General and the Federal Trade Commission disclosing (1) the identities of the parties and (2) the nature and objectives of the venture. The notifications were filed for the purpose of invoking the Act’s provisions limiting the recovery of antitrust plaintiffs to actual damages under specified circumstances. Pursuant to section 6(b) of the Act, the identities of the parties to the venture are: Engineering and Manufacturing Alliance, Ann Arbor, MI; Coherix Inc., Ann Arbor, MI; Ford Motor Company, Dearborn, MI; and Superior Controls, Plymouth, MI. The general area of planned activity is to develop High Definition Metrology and related manufacturing technologies to realize a significant enhancement in both accuracy and precision in manufacturing, aiming for 2 micron variation in precision manufacturing. The activities of this venture project will be partially funded by an award from the advanced Technology Program, National Institute of Standards and Technology, U.S. Department of Commerce. Patricia A. Brink, Deputy Director of Operations, Antitrust Division. [FR Doc. E8–4394 Filed 3–7–08; 8:45 am] BILLING CODE 4410–11–M DEPARTMENT OF JUSTICE Antitrust Division United States v. UnitedHealth Group Incorporated; Proposed Final Judgment and Competitive Impact Statement Notice is hereby given pursuant to the Antitrust Procedures and Penalties Act, 15 U.S.C. 16(b)–(h), that a Complaint, proposed Final Judgment, Hold Separate and Asset Preservation Stipulation and Order, and Competitive Impact E:\FR\FM\10MRN1.SGM 10MRN1

Agencies

[Federal Register Volume 73, Number 47 (Monday, March 10, 2008)]
[Notices]
[Page 12762]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-4394]


-----------------------------------------------------------------------

DEPARTMENT OF JUSTICE

Antitrust Division


Notice Pursuant to the National Cooperative Research and 
Production Act of 1993--High Definition Metrology and Process-2 Micron 
Manufacturing Under ATP Award No. 70NANB7H7041

    Notice is hereby given that, on December 13, 2007, pursuant to 
section 6(a) of the National Cooperative Research and Production Act of 
1993, 15 U.S.C. 4301 et seq. (``the Act''), High Definition Metrology 
and Process-2 Micron Manufacturing under ATP Award No.70NANB7H7041 has 
filed written notifications simultaneously with the Attorney General 
and the Federal Trade Commission disclosing (1) the identities of the 
parties and (2) the nature and objectives of the venture. The 
notifications were filed for the purpose of invoking the Act's 
provisions limiting the recovery of antitrust plaintiffs to actual 
damages under specified circumstances.
    Pursuant to section 6(b) of the Act, the identities of the parties 
to the venture are: Engineering and Manufacturing Alliance, Ann Arbor, 
MI; Coherix Inc., Ann Arbor, MI; Ford Motor Company, Dearborn, MI; and 
Superior Controls, Plymouth, MI. The general area of planned activity 
is to develop High Definition Metrology and related manufacturing 
technologies to realize a significant enhancement in both accuracy and 
precision in manufacturing, aiming for 2 micron variation in precision 
manufacturing.
    The activities of this venture project will be partially funded by 
an award from the advanced Technology Program, National Institute of 
Standards and Technology, U.S. Department of Commerce.

Patricia A. Brink,
Deputy Director of Operations, Antitrust Division.
 [FR Doc. E8-4394 Filed 3-7-08; 8:45 am]
BILLING CODE 4410-11-M

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.