Foreign-Trade Zone 265 - Conroe, Texas, Application for Subzone Status, Sondex, L.P. (Oil and Gas Field Services Equipment), Conroe, Texas, 12374 [E8-4550]
Download as PDF
12374
Federal Register / Vol. 73, No. 46 / Friday, March 7, 2008 / Notices
DEPARTMENT OF COMMERCE
Foreign–Trade Zones Board
[Docket 12–2008]
sroberts on PROD1PC70 with NOTICES
Foreign–Trade Zone 265 - Conroe,
Texas, Application for Subzone Status,
Sondex, L.P. (Oil and Gas Field
Services Equipment), Conroe, Texas
An application has been submitted to
the Foreign–Trade Zones Board (the
Board) by the City of Conroe, Texas,
grantee of FTZ 265, requesting special–
purpose subzone status for the oil and
gas field services equipment facility of
Sondex, L.P. (Sondex), located in
Conroe, Texas. The application was
submitted pursuant to the provisions of
the FTZ Act, as amended (19 U.S.C.
81a–81u), and the regulations of the
Board (15 CFR Part 400). It was formally
filed on February 21, 2008.
The proposed subzone would include
Sondex=s warehousing facility (20
employees, 20,000 sq. ft., 10 acres) at a
site in Conroe, Texas, located at 2418
North Frazier Street. The facility is used
for the warehousing, distribution,
testing and repair of foreign–origin and
domestic downhole–wireline equipment
and measuring–while- drilling
equipment and parts (duty rates range
from duty–free to 2.5 percent) for the
U.S. market and export. FTZ procedures
would be utilized to support Sondex=s
distribution activity that competes with
facilities located abroad.
FTZ procedures would exempt
Sondex from Customs duty payments on
foreign products that are re–exported.
Some twenty percent of the facility’s
shipments are exported. On domestic
sales, the company would be able to
defer payments until merchandise is
shipped from the facility and entered for
U.S. consumption. Sondex also plans to
realize logistical benefits through the
use of weekly customs entry procedures.
The application indicates that all of the
above–cited savings from FTZ
procedures would help improve the
facility’s international competitiveness.
In accordance with the Board’s
regulations, a member of the FTZ Staff
has been designated examiner to
investigate the application and report to
the Board.
Public comment on the application is
invited from interested parties.
Submissions (original and 3 copies)
shall be addressed to the Board’s
Executive Secretary at the address
below. The closing period for their
receipt is May 6, 2008. Rebuttal
comments in response to material
submitted during the foregoing period
may be submitted during the subsequent
15-day period to May 21, 2008.
VerDate Aug<31>2005
18:46 Mar 06, 2008
Jkt 214001
A copy of the application and
accompanying exhibits will be available
for public inspection at each of the
following locations:U.S. Department of
Commerce Export Assistance Center,
1919 Smith Street, Suite 1026, Houston,
Texas 77002; and the Office of the
Executive Secretary, Foreign–Trade
Zones Board, U.S. Department of
Commerce, Room 2111, 1401
Constitution Avenue, NW, Washington,
DC 20230.
For further information, contact
Kathleen Boyce at (202) 482–1346 or
KathleenlBoyce@ita.doc.gov.
Dated: February 21, 2008.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E8–4550 Filed 3–6–08; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
Foreign–Trade Zones Board
[Docket 11–2008]
Foreign–Trade Zone 64 - Jacksonville,
Florida, Application for Manufacturing
AuthorityBacardi USA, Inc. (Alcoholic
Beverages)
An application has been submitted to
the Foreign–Trade Zones Board (the
Board) by the Jacksonville Port
Authority, grantee of FTZ 64, requesting
manufacturing authority on behalf of
Bacardi USA, Inc. (Bacardi) at the
OutSource Logistics, Inc. (Outsource
Logistics) facility, within FTZ 64 in
Jacksonville, Florida. The application
was submitted pursuant to the
provisions of the FTZ Act, as amended
(19 U.S.C. 81a–81u), and the regulations
of the Board (15 CFR Part 400). It was
formally filed on February 21, 2008.
The Bacardi/Outsource Logistics
facility (60 employees) is located within
Site 1A of FTZ 64, at the Imeson
International Industrial Park in
Jacksonville. The facility will be used
for the kitting, warehousing/
distribution, and storage of liquor gift
packs (HTSUS duty rates 2208.50,
2208.60, 2204.10; duty rates range from
duty–free to 19.8 cents/liter). Materials
sourced from abroad (representing 90
percent of the value of the finished
product) include: imported alcoholic
beverages and glasses or flutes (HTSUS
2208.50, 2208.60, 2204.10, and 2013.28;
duty rates range from duty–free to
22.5%).
The application also requests
authority to produce gin gift sets, vodka
gift sets, and champagne gift sets (duty
rates range from duty–free to 22.4 cents
per liter) from imported gin, vodka,
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
champagne and glasses (duty rates range
from duty–free to 38%) that Bacardi
may assemble into kits under FTZ
procedures in the future. New major
activity involving these inputs/products
would require review by the FTZ Board.
FTZ procedures would exempt
Bacardi from customs duty payments on
the foreign components used in export
production. The company anticipates
that some ten percent of the facility’s
shipments will be exported. On its
domestic sales, Bacardi would be able to
choose the duty rate during customs
entry procedures that apply to finished
liquor packs for the foreign inputs noted
above. The request indicates that the
savings from FTZ procedures would
help improve the facility’s international
competitiveness.In accordance with the
Board’s regulations, a member of the
FTZ Staff has been designated examiner
to investigate the application and report
to the Board.
Public comment on the application is
invited from interested parties.
Submissions (original and 3 copies)
shall be addressed to the Board’s
Executive Secretary at the address
below. The closing period for their
receipt is May 6, 2008. Rebuttal
comments in response to material
submitted during the foregoing period
may be submitted during the subsequent
15-day period to May 21, 2008.
A copy of the application and
accompanying exhibits will be available
for public inspection at each of the
following locations: U.S. Department of
Commerce Export Assistance Center, 3
Independent Drive, Jacksonville, Florida
32202–5004; and, the Office of the
Executive Secretary, Foreign–Trade
Zones Board, U.S. Department of
Commerce, Room 2111, 1401
Constitution Avenue, NW, Washington,
DC 20230.
For further information, contact
Kathleen Boyce at (202) 482–1346 or
KathleenlBoyce@ita.doc.gov.
Dated: February 21, 2008.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E8–4551 Filed 3–6–08; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
Foreign–Trade Zones Board
[Docket 10–2008]
Foreign–Trade Zone 64 - Jacksonville,
Florida, Application for Expansion
An application has been submitted to
the Foreign–Trade Zones (FTZ) Board
(the Board) by the Jacksonville Port
E:\FR\FM\07MRN1.SGM
07MRN1
Agencies
[Federal Register Volume 73, Number 46 (Friday, March 7, 2008)]
[Notices]
[Page 12374]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-4550]
[[Page 12374]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[Docket 12-2008]
Foreign-Trade Zone 265 - Conroe, Texas, Application for Subzone
Status, Sondex, L.P. (Oil and Gas Field Services Equipment), Conroe,
Texas
An application has been submitted to the Foreign-Trade Zones Board
(the Board) by the City of Conroe, Texas, grantee of FTZ 265,
requesting special-purpose subzone status for the oil and gas field
services equipment facility of Sondex, L.P. (Sondex), located in
Conroe, Texas. The application was submitted pursuant to the provisions
of the FTZ Act, as amended (19 U.S.C. 81a-81u), and the regulations of
the Board (15 CFR Part 400). It was formally filed on February 21,
2008.
The proposed subzone would include Sondex=s warehousing facility
(20 employees, 20,000 sq. ft., 10 acres) at a site in Conroe, Texas,
located at 2418 North Frazier Street. The facility is used for the
warehousing, distribution, testing and repair of foreign-origin and
domestic downhole-wireline equipment and measuring-while- drilling
equipment and parts (duty rates range from duty-free to 2.5 percent)
for the U.S. market and export. FTZ procedures would be utilized to
support Sondex=s distribution activity that competes with facilities
located abroad.
FTZ procedures would exempt Sondex from Customs duty payments on
foreign products that are re-exported. Some twenty percent of the
facility's shipments are exported. On domestic sales, the company would
be able to defer payments until merchandise is shipped from the
facility and entered for U.S. consumption. Sondex also plans to realize
logistical benefits through the use of weekly customs entry procedures.
The application indicates that all of the above-cited savings from FTZ
procedures would help improve the facility's international
competitiveness.
In accordance with the Board's regulations, a member of the FTZ
Staff has been designated examiner to investigate the application and
report to the Board.
Public comment on the application is invited from interested
parties. Submissions (original and 3 copies) shall be addressed to the
Board's Executive Secretary at the address below. The closing period
for their receipt is May 6, 2008. Rebuttal comments in response to
material submitted during the foregoing period may be submitted during
the subsequent 15-day period to May 21, 2008.
A copy of the application and accompanying exhibits will be
available for public inspection at each of the following locations:U.S.
Department of Commerce Export Assistance Center, 1919 Smith Street,
Suite 1026, Houston, Texas 77002; and the Office of the Executive
Secretary, Foreign-Trade Zones Board, U.S. Department of Commerce, Room
2111, 1401 Constitution Avenue, NW, Washington, DC 20230.
For further information, contact Kathleen Boyce at (202) 482-1346
or Kathleen_Boyce@ita.doc.gov.
Dated: February 21, 2008.
Andrew McGilvray,
Executive Secretary.
[FR Doc. E8-4550 Filed 3-6-08; 8:45 am]
BILLING CODE 3510-DS-S