Certain New Chemicals; Receipt and Status Information, 3958-3964 [E8-1003]
Download as PDF
<![CDATA[
3958
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
Estimated total number of potential
respondents: 46.
Frequency of response: Three times a
year.
Estimated total average number of
responses for each respondent: Three.
Estimated total annual burden hours:
322 hours.
Estimated total annual costs: $14,361.
This includes an estimated reporting
burden cost of $14,361 and an estimated
cost of $0 for capital investment or
maintenance and operational costs.
Changes in the Estimates: There is no
change in the total estimated respondent
burden hours compared with that
identified in the ICR currently approved
by OMB. EPA has not modified the
requirements that were included in the
previous ICR.
Dated: January 8, 2008.
James A. Hanlon,
Director, Office of Wastewater Management.
[FR Doc. E8–1100 Filed 1–22–08; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2007–1193; FRL–8348–9]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
ebenthall on PROD1PC69 with NOTICES
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 2, 2007
through November 30, 2007, consists of
the PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before February
22, 2008.
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2007–1193, by
one of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
Number EPA–HQ–OPPT–2007–1193.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the DCO’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2007–1193. EPA’s policy is that all
comments received will be included in
the docket without change and may be
made available on-line at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ system, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov, your e-mail address
will be automatically captured and
included as part of the comment that is
placed in the docket and made available
on the Internet. If you submit an
electronic comment, EPA recommends
that you include your name and other
contact information in the body of your
comment and with any disk or CD-ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
ADDRESSES:
PO 00000
Frm 00038
Fmt 4703
Sfmt 4703
Docket: All documents in the docket
are listed in the docket index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
website to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., CBI or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC Public Reading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone number
of the EPA/DC Public Reading Room is
(202) 566–1744, and the telephone
number for the OPPT Docket is (202)
566–0280. Docket visitors are required
to show photographic identification,
pass through a metal detector, and sign
the EPA visitor log. All visitor bags are
processed through an X-ray machine
and subject to search. Visitors will be
provided an EPA/DC badge that must be
visible at all times in the building and
returned upon departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
E:\FR\FM\23JAN1.SGM
23JAN1
3959
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD-ROM that
you mail to EPA, mark the outside of the
disk or CD-ROM that you mail to EPA,
mark the outside of the disk or CD-ROM
as CBI and then identify electronically
within the disk or CD-ROM the specific
information that is claimed as CBI. In
addition to one complete version of the
comment that includes information
claimed as CBI, a copy of the comment
that does not contain the information
claimed as CBI must be submitted for
inclusion in the public docket.
Information so marked will not be
disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket ID
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions. The Agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail to
allow for it to be reproduced.
vi. Provide specific examples to
illustrate your concerns and suggest
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from October 2, 2007
through November 30, 2007, consists of
the PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 111 PREMANUFACTURE NOTICES RECEIVED FROM: 10/01/07 TO 11/30/07
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
10/01/07
12/29/07
CBI
P–08–0002
10/01/07
12/29/07
Genencor, (Danisco,
USA)
P–08–0003
P–08–0004
10/01/07
10/01/07
12/29/07
12/29/07
CBI
CBI
P–08–0005
10/01/07
12/29/07
CBI
P–08–0006
P–08–0007
P–08–0008
P–08–0009
P–08–0010
P–08–0011
10/03/07
10/03/07
10/03/07
10/03/07
10/03/07
10/04/07
12/31/07
12/31/07
12/31/07
12/31/07
12/31/07
01/01/08
CBI
CBI
CBI
CBI
CBI
CBI
P–08–0012
ebenthall on PROD1PC69 with NOTICES
P–08–0001
10/04/07
01/01/08
CBI
P–08–0013
10/03/07
12/31/07
Incorez Corporation
P–08–0014
P–08–0015
P–08–0016
10/03/07
10/03/07
10/09/07
12/31/07
12/31/07
01/06/08
CBI
CBI
CBI
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
PO 00000
Frm 00039
Use
(G) Esterified polyamic acid polymer
for coatings, open, non-dispersive
use
(S) Textile chemical formulation (TCF)
of denim bleaching products; laundry denim bleaching and/or modification of the cast of denim
(S) Intermediate for paint binder
(S) Topcoat for leather; topcoat for
plastics and epdn rubber
(S) Topcoat for leather; topcoat for
plastics and epon rubber
(G) Resin for coatings
(G) Resin for coatings
(G) Resin for coatings
(G) Resin for coatings
(G) Resin for coatings
(S) Paint binder (whichever of the two
PMN substance is produced will be
used as a paint binder)
(S) Paint binder (whichever of the two
PMN substance is produced will be
used as a paint binder)
(S) Curing agent for epoxy based
coatings
(G) Resin for coatings
(G) Resin for coatings
(S) Chemical Intermediate
Fmt 4703
Sfmt 4703
E:\FR\FM\23JAN1.SGM
Chemical
(G) Esterified polyamic acid polymer
(S)
Benzonitrile,
4-hydroxy-3,5dimethoxy- (syringonitrile)
(G) Methacrylate monomer
(G) Aliphatic polycarbonate diol polyurethane
(G) Aliphatic polycarbonate diol polyurethane
(G) Acrylic polyester microgel polymer
(G) Polyester polymer
(G) Acrylic polymer
(G) Acrylic polymer
(G) Acrylic polymer
(G) Octyl acrylates
(G) Octyl acrylates
(G) Emulsified polyamine hardener
(G) Acrylic polymer
(G) Acrylic polymer
(G) Hydroxymercapto substituted benzene
23JAN1
3960
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
I. 111 PREMANUFACTURE NOTICES RECEIVED FROM: 10/01/07 TO 11/30/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
10/09/07
01/06/08
P–08–0018
P–08–0019
10/10/07
10/10/07
01/07/08
01/07/08
The Dow Chemical
Company
CBI
CBI
P–08–0020
10/10/07
01/07/08
CBI
P–08–0021
10/11/07
01/08/08
Robertet, Inc.
P–08–0022
10/11/07
01/08/08
Mitsubishi Chemical
Performance Polymers, Inc.
P–08–0023
10/11/07
01/08/08
Mitsubishi Chemical
Performance Polymers, Inc.
P–08–0024
10/10/07
01/07/08
CBI
P–08–0025
10/12/07
01/09/08
CBI
P–08–0026
10/15/07
01/12/08
CBI
(S) Melt processing e.g. injection
moulding to produce finished articles
P–08–0027
P–08–0028
10/15/07
10/15/07
01/12/08
01/12/08
CBI
CBI
(G) Silicone intermediate
(S) Textile treating agent
P–08–0029
P–08–0030
10/17/07
10/18/07
01/14/08
01/15/08
CBI
CBI
P–08–0031
10/18/07
01/15/08
CBI
P–08–0032
10/18/07
01/15/08
CBI
P–08–0033
P–08–0034
10/19/07
10/22/07
01/16/08
01/19/08
CBI
Hydbrid Plastics, Inc.
(G) Destructive use
(G) A. Synthetic lubricant base fluid
(major); B. Reactive intermediate
(minor)
(G) A. Synthetic lubricant base fluid
(major); B. Reactive intermediate
(minor)
(G) A. Synthetic lubricant base fluid
(major); B. Reactive intermediate
(minor)
(G) Chemical intermediate
(S) Epoxy resin for high temperature
aerospace composites
P–08–0035
10/19/07
01/16/08
CBI
(G) Fabric treatment agent
P–08–0036
10/23/07
01/20/08
P–08–0037
10/24/07
01/21/08
Fujifilm Hunt Chemicals U.S.A., Inc.
Forbo Adhesives, LLC
(S) Intermediated for production of
PMN substance P–06–444
(G) Hot melt polyurethane adhesive
P–08–0038
ebenthall on PROD1PC69 with NOTICES
P–08–0017
10/25/07
01/22/08
CBI
P–08–0039
10/25/07
01/22/08
CBI
(S) Aliphatic acrylate polymer used in
the manufacture of Ultraviolet curable inks and coatings
(G) Hardening agent
P–08–0040
10/25/07
01/22/08
CBI
(G) Sealant
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
PO 00000
Frm 00040
Chemical
(G) Component of electrical laminates
(G) Phosphorated phenolic novolac
(G) Oilfield applications
(G) Component of manufactured consumer article - contained use
(G) Chemical intermediate in the
manufacture of other industrial
chemicals, and additive in formulated coating products
(S) As an odoriferous component of
fragrance compounds
(S) Molding material for agriculture;
molding material for food package;
material for fiber, monofilament;
molding material for construction;
material for sheet, film
(S) Molding material for agriculture;
molding material for food package;
material for fiber, monofilament;
molding material for construction;
material for sheet, film
(G) Crosslinking agent to be ultimately used in the manufacture of
automotive and aircraft coating materials
(G) Papermaking chemical
(G) Modified olefins
(G) Benzene, 1,4-bis(aralkoxy)-
Fmt 4703
Sfmt 4703
E:\FR\FM\23JAN1.SGM
(S) Propanol, 1 (or
phenoxyethoxy)-
2)-(methyl-2-
(S) Alcoholic beverages, rum, ext.
(G) Alkanedioic acid, polymer with
butanedioic acid, 1,4-butanediol
and 2-hydroxypropanoic acid
(G) Alkanedioic acid, polymer with
1,4-butanediol
and
2hydroxypropanoic acid
(S) 1,3-dioxolane-4-butanol,2-ethenyl-
(S)
Formamide,
N-ethenyl-,
homopolymer, hydrolyzed, N-(3carboxy-1-oxopropyl) N-[2-hydroxy3-(trimethylammonio)propyl] derivs.,
chlorides
(S)
Methanone,
1,1′-(1,4-phenylene)bis[1-(4-fluorophenyl)-, polymer
with
bis(4hydroxyphenyl)methanone
(G) Dimethyl siloxane polyglycol
(G) Dimethyl siloxane polyethylene
glycol
(G) Hindered phenolic ester
(G) 1,1 Geminal disubstituted ethylene
(G) 1,1 Geminal disubstituted ethylene
(G) 1,1 Geminal disubstituted ethylene
(G) Chloro fluoro alkane
(S)
Oxirane,
2-[[3(trimethoxysilyl)propoxy]methyl]-,
hydrolyzed
(S)
6Hdibenz[c,e][1,2]oxaphosphorium,6(phenylmethyl)-,6-oxide
(S) Benzenecarboximidamide, n-hydroxy-4-nitro(G) Isocyanate functional polyester
polyether urethane polymer
(G) Tertiary amine acrylate
(G) Mixed amino diaryl sulfone isomers
(G) Polyurethane hybrid
23JAN1
3961
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
I. 111 PREMANUFACTURE NOTICES RECEIVED FROM: 10/01/07 TO 11/30/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
10/25/07
01/22/08
CBI
(G) Paint
P–08–0042
P–08–0043
10/23/07
10/26/07
01/20/08
01/23/08
CBI
CBI
P–08–0044
P–08–0045
10/26/07
10/29/07
01/23/08
01/26/08
CBI
Rahn USA Corp.
P–08–0046
P–08–0047
P–08–0048
P–08–0049
10/29/07
10/29/07
10/31/07
10/30/07
01/26/08
01/26/08
01/28/08
01/27/08
CBI
CBI
CBI
CBI
(G) Foam additive
(G) Jacketing of wires and data-cables
(G) Non-dispersive use
(S) Ultra violet / electron beam reactive formulations
(G) Coating additive
(G) Raw material
(G) Colourant dispersant
(G) Ink additive
P–08–0050
P–08–0051
P–08–0052
10/31/07
10/31/07
11/01/07
01/28/08
01/28/08
01/29/08
P–08–0053
11/01/07
01/29/08
CBI
3M Company
BAE Systems , ordnance systems Inc.
Reichhold, Inc.
(G) Metalworking fluid component
(G) Adhesive
(G) For use as a high explosive in explosives formulatons for DOD
(S) Topcoats for industrial equipment
P–08–0054
P–08–0055
11/01/07
11/01/07
01/29/08
01/29/08
CBI
CBI
(G) Semiconductor coating
(G) Open non-dispersive (coatings)
P–08–0056
P–08–0057
P–08–0058
P–08–0059
P–08–0060
P–08–0061
11/01/07
11/01/07
11/01/07
11/01/07
11/01/07
10/31/07
01/29/08
01/29/08
01/29/08
01/29/08
01/29/08
01/28/08
CBI
CBI
CBI
CBI
CBI
CBI
(G) Functional fluid
(G) Functional fluid
(G) Functional fluid
(G) Functional fluid
(G) Functional fluid
(G) Reactive emulsifier for emulsion
polymerization
P–08–0062
11/01/07
01/29/08
Reichhold, Inc.
(S) Topcoats for industrial equipment
P–08–0063
11/01/07
01/29/08
CBI
(S) Extrusion of tubing systems; injection molding of special applications
P–08–0064
P–08–0065
P–08–0066
P–08–0067
11/02/07
11/01/07
11/01/07
11/05/07
01/30/08
01/29/08
01/29/08
02/02/08
CBI
CBI
CBI
CIBA Corporation
(G) An open non-dispersive use
(G) Rheology additive
(G) Rheology additive
(S) Pigment for printing ink used in
time-temperature indicator labeling
P–08–0068
11/05/07
02/02/08
Firmenich Inc.
P–08–0068
11/05/07
02/02/08
Firmenich Inc.
P–08–0069
P–08–0070
P–08–0071
P–08–0072
11/05/07
11/05/07
11/05/07
11/05/07
02/02/08
02/02/08
02/02/08
02/02/08
CBI
CBI
CBI
CBI
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.
(G) Fuel additive-destructive use
(G) Coating
(G) Coating
(G) Thickener for inorganic materials
P–08–0073
11/06/07
02/03/08
CBI
P–08–0074
ebenthall on PROD1PC69 with NOTICES
P–08–0041
11/06/07
02/03/08
CBI
P–08–0075
P–08–0076
11/06/07
11/07/07
02/03/08
02/04/08
CBI
CBI
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
PO 00000
(S) Crosslinker for coatings and adhesives
(S) Crosslinker for coatings and adhesives
(G) Paint
(G) For application to cellulosic substrates
Frm 00041
Fmt 4703
Sfmt 4703
E:\FR\FM\23JAN1.SGM
Chemical
(G) Neodecanoic acid, oxiranyl ester
modified alkyl acrylate,polymer with
alkyl
acrylates,
styrene
and
hydroxyalkyl acrylates, peroxide-initiated
(G) Treated silica
(G) Fluoropolymer
(G) Animated epoxy resin
(G) Aliphatic urethane acrylate
oligomer
(G) Mixed metal oxide complex
(G) Metal oxide complex
(G) Acrylic polymer
(G) 2-propenoic acid, 2-methyl-, polymer with alkyl 2-propenoate,
ethenylbenzene and 2-propenoic
acid, metal salt, peroxycompoundinitiated
(G) Amide polymer
(G) Substituted acrylate polymer
(S)
Nitrotriazolone
3-nitro-1,2,4triazol-5-one
(G) Urethane modified vegetable oil,
epoxidized polymer
(G) Poly (arylene ether)
(G) Aqueous hydroxyl-functional polyester polyacrylate dispersion
(G) Polyalphaolefins; paos
(G) Polyalphaolefins; paos
(G) Polyalphaolefins; paos
(G) Polyalphaolefins; paos
(G) Polyalphaolefins; paos
(G) Alcohol, reaction products with alkylene oxide, alkenyl glycidyl ether
sulfate
(G) Urethane modified vegetable oil,
epoxidized polymer
(G) Polyamide based on alkanedioic
acid,
alkyl
lactam
and
polyoxyalkylene
(G) Rosin modified phenolic resin
(G) Urethane-urea
(G) Urethane-urea
(G)
1′,1′′′-[1,4phenylenebis(methylene)]bis[1′,3′dihydro-8-methoxy-3′3,′-dimethyl-6nitro- aromatic substituted indole
(S) Definition: Extractives and their
physically modified derivatives.
Schinus Terebinthifolius.
(S) Oils, schinus terebinthifolius
(G) Alkenyl succinimide
(G) Fluorosilicone
(G) Fluorosilicone
(G)
Poly
(methacryloyloxyalkyl
trialkylammonium salt)
(G) Aliphatic polyisocyanate, C16-alcohol and polyalkylene glycol-blocked
(G) Aliphatic polyisocyanate, C16-alcohol and polyalkylene glycol-blocked
(G) Polyisocyanate resin
(G)
Disubstituted
phenylazo
naphthalenstrisulfonic acid, salt
23JAN1
3962
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
I. 111 PREMANUFACTURE NOTICES RECEIVED FROM: 10/01/07 TO 11/30/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S)
Ferrate(1-),
bis[4-[2-[5-(1,1dimethylethyl)-2-(hydroxy.kappa.o)phenyl]diazenyl].kappa.n1]-3-(hydroxy-.kappa.o]-nphenyl-2naphthalenecarboxamidato(2-)], hydrogen (1:1)
(G) Plant oil
11/13/07
02/10/08
Orient Corporation of
America
(S) Charge stabilizer for electro-photo
copy toner
P–08–0078
11/13/07
02/10/08
CBI
P–08–0079
11/13/07
02/10/08
Reichhold, Inc.
(S) PMN material in fragrance products
(S) Resin for paints/coatings
P–08–0080
11/13/07
02/10/08
Reichhold, Inc.
(S) Resin for paints/coatings
P–08–0081
11/13/07
02/10/08
Lubrizol Metalworking
Additives
(S) Metalworking fluid component
P–08–0082
11/13/07
02/10/08
Lubrizol Metalworking
Additives
(S) Metalworking fluid component
P–08–0083
11/13/07
02/10/08
Lubrizol Metalworking
Additives
(S) Metalworking fluid component
P–08–0084
11/13/07
02/10/08
Lubrizol Metalworking
Additives
(S) Metalworking fluid component
P–08–0085
11/13/07
02/10/08
Lubrizol Metalworking
Additives
(S) Metalworking fluid component
P–08–0086
11/13/07
02/10/08
Lubrizol Metalworking
Additives
(S) Metalworking fluid component
P–08–0087
11/14/07
02/11/08
CBI
P–08–0088
P–08–0089
11/14/07
11/15/07
02/11/08
02/12/08
CBI
CBI
(G) Lubricant additive open, non-dispersive use
(G) Emulsifier
(G) Component of paint
P–08–0090
P–08–0091
11/01/07
11/13/07
01/29/08
02/10/08
CBI
Sasol North America
Inc.
(G) Modifier for epoxy formulations
(S) Polymer performance additive
P–08–0092
11/13/07
02/10/08
Sasol North America
Inc.
(S) Polymer performance additive
P–08–0093
P–08–0094
11/16/07
11/19/07
02/13/08
02/16/08
CBI
CBI
(G) Binder in foundry applications
(G) Lubricant Additive
P–08–0095
ebenthall on PROD1PC69 with NOTICES
P–08–0077
11/19/07
02/16/08
Cytec Industries Inc.
(S) Process chemical for sulfur removal from diesel fuel
P–08–0096
11/26/07
02/23/08
CBI
(G) Binder
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
E:\FR\FM\23JAN1.SGM
(G) Amine salt of polyester polyol, hydroxy substituted carboxylic acid,
cycloaliphatic
glycol,
aliphatic
diisocyanate and hydroxy substituted alkylamines.
(G) Amine salt of polyester polyol,
cycloaliphatic glycol, hydroxy substituted
carboxylic
acid,
alkyldiamine
and
aliphatic
diisocyanate
(S) Soybean oil, maleated, ester with
polyethylene glycol mono-C12–16alkyl ethers
(S) Soybean oil, maleated, ester with
polyethylene glycol mono-C12–16alkyl ethers, potassium salts
(S) Soybean oil, maleated, ester with
polyethylene glycol mono-C12–16alkyl ethers, compound with ethanolamine
(S) Soybean oil, maleated, ester with
polyethylene glycol mono-C12–16alkyl ethers, compound with triethanolamine
(S) Soybean oil, maleated, ester with
polyethylene glycol mono-C12–16alkyl
ethers,
compound
with
branched
3-(tridecyloxy)-1propanamine
(S) Amines, C12–14-tert-alkyl, compounds with maleated soybean oil
ester with polyethylene glycol
mono-C12–16-alkyl ethers
(G) Alkyl acid reaction products with
metal salt of alkyl alcohol
(G) Perfluorodioxyalkonicacid salt
(G) Fatty acid oils polymer with aromatic acid, acrylates, styrene,
polyol and conjugated anhydrides
(G) Epoxy liquid polysulfide
(S)
Oxirane,
2-[[3(trimethoxysilyl)propoxy]methyl]-,
reaction products with boehmite
(al(oh)o)
(S)
Oxirane,
2-[[3(trimethoxysilyl)propoxy]methyl]-,
reaction products with boehmite
(al(oh)o)
(G) Aromatic polyester polyol
(G)
Alkyl
methacrylate
esters
telomers with 1-dodecanethiol, tertbu 2-ethylhexaneperoxoate-initiated
(S) Phosphonium, methyltris (2methylpropyl)-,
salt
with
4methylbenzenesulfonic acid (1:1)
(G) Polymer of styrene-butadiene,
polybutadiene, ethoxylated nonyl
pheneol
acrylate
and
1,6hexanediol diacrylate
23JAN1
3963
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
I. 111 PREMANUFACTURE NOTICES RECEIVED FROM: 10/01/07 TO 11/30/07—Continued
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Polymer of styrene-butadiene,
polybutanediene, ethoxylated nonyl
pheneol
acrylate
and
1,6hexanediol diacrylate
(G) Polymer of styrene-butadiene,
polybutanediene, ethoxylated nonyl
pheneol
acrylate
and
1,6hexanediol diacrylate
(S) 1,4-benzenedicarboxylic acid,
polymer with 1,2-ethanediol, 2,5furandione, 2,2′-oxybis [ethanol]
and 1,2-propanediol
(G) Polypropylene glycol succinate
(S) Phosphinic acid, p,p-diphenyl(G) Caprolactam-blocked aliphatic
isocyanate polymer
(G)
Dialkylmonoheterocycledione,
homopolymer, ester with 1,2,3propanetriol
(G) Gallium, phthalocyanine complex
P–08–0097
11/26/07
02/23/08
CBI
(G) Binder
P–08–0098
11/26/07
02/23/08
CBI
(G) Binder
P–08–0099
11/21/07
02/18/08
AOC LLC
(S)
Polyester
component
for
pultrusion of fiberglass reinforced
plastic parts
P–08–0100
P–08–0101
P–08–0102
11/26/07
11/26/07
11/26/07
02/23/08
02/23/08
02/23/08
CBI
Cytec Industries Inc.
CBI
(G) Metalworking fluid
(G) Coating resin additive
(G) Industrial liquid coatings
P–08–0103
11/26/07
02/23/08
CBI
(G) Intermediate
P–08–0104
11/28/07
02/25/08
CBI
P–08–0105
11/28/07
02/25/08
CBI
P–08–0106
11/28/07
02/25/08
CBI
(G) Open, non-dispersive use (additive to coating layer)
(G) Open, non-dispersive use (additive to coating layer)
(S) Binder for coatings for wood
P–08–0107
P–08–0108
P–08–0109
P–08–0110
11/28/07
11/28/07
11/29/07
11/29/07
02/25/08
02/25/08
02/26/08
02/26/08
CBI
CBI
CBI
CBI
(G)
(G)
(G)
(G)
In Table II of this unit, EPA provides
the following information (to the extent
Rubber additive
Marker for liquid petroleum fuels
Polyester substrate auxiliary
Raw material
(G) Azo compound
(S) 2-propenoic acid, 2-methyl-, polymer
with
butyl
2-methyl-2propenoate, butyl 2-propenoate, n(1,1-dimethyl-3-oxobutyl)-2propenamide, ethenylbenzene and
methyl 2-methyl-2-propenoate
(G) Alkoxy silane
(G) Alkylphthalein ester
(G) Disubstituted methoxyacetanilide
(G) Mixed metal halide
that such information is not claimed as
CBI) on the TMEs received:
II. 1 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 10/01/07 TO 11/30/07
Received
Date
T–08–0001
Projected
Notice
End Date
Manufacturer/Importer
11/19/07
Case No.
01/02/08
Cytec industries Inc.
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
Use
Chemical
(S) Process chemical for sulfur removal from diesel fuel
(S) Phosphonium, methyltris (2methylpropyl)-,
salt
with
4methylbenzenesulfonic acid (1:1)
CBI) on the Notices of Commencement
to manufacture received:
III. 41 NOTICES OF COMMENCEMENT FROM: 10/01/07 TO 11/30/07
Case No.
Received Date
Commencement
Notice End Date
ebenthall on PROD1PC69 with NOTICES
P–02–0748
11/05/07
10/10/07
P–02–0750
P–02–0751
P–02–0778
P–02–0860
P–05–0079
P–05–0138
P–05–0420
11/05/07
11/05/07
11/07/07
11/14/07
11/06/07
11/29/07
11/21/07
10/10/07
10/10/07
10/10/07
10/16/07
10/12/07
11/20/07
11/01/07
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
PO 00000
Chemical
(S)
Heptacyclo[11.11.1.13,11.15,21.17,19.19,17.115,23]dodecasiloxane,
dodecaphenyl(S) Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxane, octamethyl(S) Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxane, octaphenyl(G) Dialkyl dithiocarbamate ester
(G) Silicoaluminophosphate with template
(G) Potassium salt of substituted arylazo butanamide
(G) Multifunctional acrylate oligomer resin
(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with
1-amino-2-propanol
Frm 00043
Fmt 4703
Sfmt 4703
E:\FR\FM\23JAN1.SGM
23JAN1
3964
Federal Register / Vol. 73, No. 15 / Wednesday, January 23, 2008 / Notices
III. 41 NOTICES OF COMMENCEMENT FROM: 10/01/07 TO 11/30/07—Continued
Case No.
Commencement
Notice End Date
Received Date
P–05–0423
11/21/07
11/01/07
P–06–0489
P–06–0546
11/29/07
11/27/07
11/16/07
11/19/07
P–06–0563
P–06–0820
P–07–0048
P–07–0049
P–07–0132
P–07–0156
P–07–0216
11/29/07
11/20/07
11/23/07
11/23/07
11/23/07
11/21/07
11/13/07
11/21/07
11/12/07
08/21/07
10/30/07
11/05/07
10/10/07
11/08/07
P–07–0250
P–07–0300
P–07–0318
P–07–0352
P–07–0361
11/14/07
11/02/07
11/15/07
11/14/07
11/06/07
10/25/07
10/29/07
10/16/07
10/29/07
10/23/07
P–07–0392
P–07–0402
P–07–0408
P–07–0439
P–07–0448
P–07–0495
P–07–0498
11/05/07
11/21/07
11/05/07
11/21/07
10/29/07
11/09/07
11/26/07
10/08/07
11/05/07
10/16/07
10/25/07
10/16/07
10/19/07
11/06/07
P–07–0519
P–07–0525
11/01/07
11/05/07
10/05/07
10/21/07
P–07–0529
10/31/07
10/18/07
P–07–0539
P–07–0560
P–07–0561
P–07–0569
11/20/07
10/29/07
11/06/07
11/26/07
11/15/07
10/19/07
10/23/07
10/29/07
P–07–0630
P–99–0303
11/30/07
11/30/07
11/27/07
11/27/07
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: January 14, 2008.
Chandler Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E8–1003 Filed 1–22–08; 8:45 am]
ebenthall on PROD1PC69 with NOTICES
BILLING CODE 6560–50–S
Chemical
(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with
2-(2-aminoethoxy) ethanol
(G) Fluoroalkyl methacrylate copolymer
(G) Substituted carbomonocycle, polymer with isocyanate substituted alkyl
carbomonocycle, substituted alkenoates, substituted heteromonocycle,
alkanedioic acid, alkane diol, reaction products with substituted alkylamine,
compounds with substituted alkanol
(G) Fluoroalkyl methacrylate copolymer
(G) Trisubstituted triazine
(G) Salt of amine with aliphatic acid
(G) Aliphatic polyamide
(G) Polyurethane prepolymer; polyurethane hot melt adhesive
(G) Aminomercapto siloxane
(G) Substituted phenyl amino alkyl sulfonyl reaction product with substituted
naphthalenesulfonic acid amino compound
(G) Fatty acid modified polyester resin
(G) Acrylic polymer on the basis of isobutyl methacrylate
(G) Organic lithium compound
(G) Modified polymer of substituted acrylate and alkyl methacrylates
(G) Linseed oil, ester with pentaerythritol, polymer with hydrazine, 3-hydroxy-2(hydroxymethyl)2-methylpropanoic acid, 5-isocyanato-1-(isocyanatomethyl)alkylcyclohexane, 1,1′-methylenebis[4.isocyanatocyclohexane] and polypropylene glycol, compounds with triethylamine
(G) Modified epoxy resin
(G) Alkylphenoxy naphthalic acid amide, n-alkylphenyl(G) Epoxy phenolic resin
(G) Polycarboxylate, modified sodium salt
(G) Secondary amine adduct
(G) Amino substituted benzoic acid
(S) 2-propenoic acid, 2-methyl-, butyl ester, polymer with 2-ethylhexyl 2propenoate, 2-methylpropyl 2-methyl-2-propenoate and 1,2-propanediol
mono(2-methyl-2-propenoate), tert-bu 3,5,5-trimethylhexaneperoxoate-initiated
(G) Aminobenzene
(G) Fatty acids, hydrogenated, reaction products with tetraethylenepentamine,
aliphatic carboxylate
(G) 2-propenoic acid, 2-methyl-, telomer with 1-alkylthiol, alkyl 2-propenoate
and alkyl 2-methyl-2-propenoate, ammonium salt
(G) Epoxy acrylic resin
(G) Acrylate modified acrylonitrile, butadiene, styrene polymer
(G) Metal salt of styrene - acrylic copolymer
(S) Siloxanes and silicones, di-me, me [(2-methyl-1-oxo-2-propen-1yl)oxy]methyl,
[(methoxymethyl[[(2-methyl-1-oxo-2-propen-1yl)oxy]methyl)silyl]oxy]-terminated
(G) Polyester polyether urethane block copolymer
(G) N-butyl, 2-ethylhexyl acrylate copolymer
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPP–2006-0936; FRL–8345–7]
Notice of Filing of Pesticide Petitions
for Residues of Pesticide Chemicals in
or on Various Commodities
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: This notice announces the
initial filing of pesticide petitions
proposing the establishment or
modification of regulations for residues
of pesticide chemicals in or on various
commodities.
DATES: Comments must be received on
or before February 22, 2008.
VerDate Aug<31>2005
15:17 Jan 22, 2008
Jkt 214001
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
Submit your comments,
identified by docket identification (ID)
number and the pesticide petition
number (PP) of interest, by one of the
following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Office of Pesticide Programs
(OPP) Regulatory Public Docket (7502P),
Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington,
DC 20460–0001.
• Delivery: OPP Regulatory Public
Docket (7502P), Environmental
Protection Agency, Rm. S–4400, One
Potomac Yard (South Bldg.), 2777 S.
Crystal Dr., Arlington, VA. Deliveries
are only accepted during the Docket’s
normal hours of operation (8:30 a.m. to
ADDRESSES:
E:\FR\FM\23JAN1.SGM
23JAN1
]]>Agencies
[Federal Register Volume 73, Number 15 (Wednesday, January 23, 2008)]
[Notices]
[Pages 3958-3964]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-1003]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2007-1193; FRL-8348-9]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from October 2, 2007 through November 30, 2007, consists of the
PMNs and TMEs, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before February 22, 2008.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2007-1193, by one of the following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2007-1193. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2007-1193. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
https://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at https://
www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
[[Page 3959]]
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 2, 2007 through November
30, 2007, consists of the PMNs and TMEs, both pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 111 Premanufacture Notices Received From: 10/01/07 to 11/30/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0001 10/01/07 12/29/07 CBI (G) Esterified (G) Esterified
polyamic acid polyamic acid
polymer for polymer
coatings, open, non-
dispersive use
P-08-0002 10/01/07 12/29/07 Genencor, (Danisco, (S) Textile chemical (S) Benzonitrile, 4-
USA) formulation (TCF) of hydroxy-3,5-
denim bleaching dimethoxy-
products; laundry (syringonitrile)
denim bleaching and/
or modification of
the cast of denim
P-08-0003 10/01/07 12/29/07 CBI (S) Intermediate for (G) Methacrylate
paint binder monomer
P-08-0004 10/01/07 12/29/07 CBI (S) Topcoat for (G) Aliphatic
leather; topcoat for polycarbonate diol
plastics and epdn polyurethane
rubber
P-08-0005 10/01/07 12/29/07 CBI (S) Topcoat for (G) Aliphatic
leather; topcoat for polycarbonate diol
plastics and epon polyurethane
rubber
P-08-0006 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polyester
coatings microgel polymer
P-08-0007 10/03/07 12/31/07 CBI (G) Resin for (G) Polyester polymer
coatings
P-08-0008 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0009 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0010 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0011 10/04/07 01/01/08 CBI (S) Paint binder (G) Octyl acrylates
(whichever of the
two PMN substance is
produced will be
used as a paint
binder)
P-08-0012 10/04/07 01/01/08 CBI (S) Paint binder (G) Octyl acrylates
(whichever of the
two PMN substance is
produced will be
used as a paint
binder)
P-08-0013 10/03/07 12/31/07 Incorez Corporation (S) Curing agent for (G) Emulsified
epoxy based coatings polyamine hardener
P-08-0014 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0015 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0016 10/09/07 01/06/08 CBI (S) Chemical (G) Hydroxymercapto
Intermediate substituted benzene
[[Page 3960]]
P-08-0017 10/09/07 01/06/08 The Dow Chemical (G) Component of (G) Phosphorated
Company electrical laminates phenolic novolac
P-08-0018 10/10/07 01/07/08 CBI (G) Oilfield (G) Modified olefins
applications
P-08-0019 10/10/07 01/07/08 CBI (G) Component of (G) Benzene, 1,4-
manufactured bis(aralkoxy)-
consumer article -
contained use
P-08-0020 10/10/07 01/07/08 CBI (G) Chemical (S) Propanol, 1 (or
intermediate in the 2)-(methyl-2-
manufacture of other phenoxyethoxy)-
industrial
chemicals, and
additive in
formulated coating
products
P-08-0021 10/11/07 01/08/08 Robertet, Inc. (S) As an odoriferous (S) Alcoholic
component of beverages, rum, ext.
fragrance compounds
P-08-0022 10/11/07 01/08/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid,
Performance for agriculture; polymer with
Polymers, Inc. molding material for butanedioic acid,
food package; 1,4-butanediol and 2-
material for fiber, hydroxypropanoic
monofilament; acid
molding material for
construction;
material for sheet,
film
P-08-0023 10/11/07 01/08/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid,
Performance for agriculture; polymer with 1,4-
Polymers, Inc. molding material for butanediol and 2-
food package; hydroxypropanoic
material for fiber, acid
monofilament;
molding material for
construction;
material for sheet,
film
P-08-0024 10/10/07 01/07/08 CBI (G) Crosslinking (S) 1,3-dioxolane-4-
agent to be butanol,2-ethenyl-
ultimately used in
the manufacture of
automotive and
aircraft coating
materials
P-08-0025 10/12/07 01/09/08 CBI (G) Papermaking (S) Formamide, N-
chemical ethenyl-,
homopolymer,
hydrolyzed, N-(3-
carboxy-1-oxopropyl)
N-[2-hydroxy-3-
(trimethylammonio)pr
opyl] derivs.,
chlorides
P-08-0026 10/15/07 01/12/08 CBI (S) Melt processing (S) Methanone, 1,1'-
e.g. injection (1,4-phenylene)bis[1-
moulding to produce (4-fluorophenyl)-,
finished articles polymer with bis(4-
hydroxyphenyl)methan
one
P-08-0027 10/15/07 01/12/08 CBI (G) Silicone (G) Dimethyl siloxane
intermediate polyglycol
P-08-0028 10/15/07 01/12/08 CBI (S) Textile treating (G) Dimethyl siloxane
agent polyethylene glycol
P-08-0029 10/17/07 01/14/08 CBI (G) Destructive use (G) Hindered phenolic
ester
P-08-0030 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal
lubricant base fluid disubstituted
(major); B. Reactive ethylene
intermediate (minor)
P-08-0031 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal
lubricant base fluid disubstituted
(major); B. Reactive ethylene
intermediate (minor)
P-08-0032 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal
lubricant base fluid disubstituted
(major); B. Reactive ethylene
intermediate (minor)
P-08-0033 10/19/07 01/16/08 CBI (G) Chemical (G) Chloro fluoro
intermediate alkane
P-08-0034 10/22/07 01/19/08 Hydbrid Plastics, (S) Epoxy resin for (S) Oxirane, 2-[[3-
Inc. high temperature (trimethoxysilyl)pro
aerospace composites poxy]methyl]-,
hydrolyzed
P-08-0035 10/19/07 01/16/08 CBI (G) Fabric treatment (S) 6H-
agent dibenz[c,e][1,2]oxap
hosphorium,6-
(phenylmethyl)-,6-
oxide
P-08-0036 10/23/07 01/20/08 Fujifilm Hunt (S) Intermediated for (S)
Chemicals U.S.A., production of PMN Benzenecarboximidami
Inc. substance P-06-444 de, n-hydroxy-4-
nitro-
P-08-0037 10/24/07 01/21/08 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-08-0038 10/25/07 01/22/08 CBI (S) Aliphatic (G) Tertiary amine
acrylate polymer acrylate
used in the
manufacture of
Ultraviolet curable
inks and coatings
P-08-0039 10/25/07 01/22/08 CBI (G) Hardening agent (G) Mixed amino
diaryl sulfone
isomers
P-08-0040 10/25/07 01/22/08 CBI (G) Sealant (G) Polyurethane
hybrid
[[Page 3961]]
P-08-0041 10/25/07 01/22/08 CBI (G) Paint (G) Neodecanoic acid,
oxiranyl ester
modified alkyl
acrylate,polymer
with alkyl
acrylates, styrene
and hydroxyalkyl
acrylates, peroxide-
initiated
P-08-0042 10/23/07 01/20/08 CBI (G) Foam additive (G) Treated silica
P-08-0043 10/26/07 01/23/08 CBI (G) Jacketing of (G) Fluoropolymer
wires and data-
cables
P-08-0044 10/26/07 01/23/08 CBI (G) Non-dispersive (G) Animated epoxy
use resin
P-08-0045 10/29/07 01/26/08 Rahn USA Corp. (S) Ultra violet / (G) Aliphatic
electron beam urethane acrylate
reactive oligomer
formulations
P-08-0046 10/29/07 01/26/08 CBI (G) Coating additive (G) Mixed metal oxide
complex
P-08-0047 10/29/07 01/26/08 CBI (G) Raw material (G) Metal oxide
complex
P-08-0048 10/31/07 01/28/08 CBI (G) Colourant (G) Acrylic polymer
dispersant
P-08-0049 10/30/07 01/27/08 CBI (G) Ink additive (G) 2-propenoic acid,
2-methyl-, polymer
with alkyl 2-
propenoate,
ethenylbenzene and 2-
propenoic acid,
metal salt,
peroxycompound-
initiated
P-08-0050 10/31/07 01/28/08 CBI (G) Metalworking (G) Amide polymer
fluid component
P-08-0051 10/31/07 01/28/08 3M Company (G) Adhesive (G) Substituted
acrylate polymer
P-08-0052 11/01/07 01/29/08 BAE Systems , (G) For use as a high (S) Nitrotriazolone 3-
ordnance systems explosive in nitro-1,2,4-triazol-
Inc. explosives 5-one
formulatons for DOD
P-08-0053 11/01/07 01/29/08 Reichhold, Inc. (S) Topcoats for (G) Urethane modified
industrial equipment vegetable oil,
epoxidized polymer
P-08-0054 11/01/07 01/29/08 CBI (G) Semiconductor (G) Poly (arylene
coating ether)
P-08-0055 11/01/07 01/29/08 CBI (G) Open non- (G) Aqueous hydroxyl-
dispersive functional polyester
(coatings) polyacrylate
dispersion
P-08-0056 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0057 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0058 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0059 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0060 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0061 10/31/07 01/28/08 CBI (G) Reactive (G) Alcohol, reaction
emulsifier for products with
emulsion alkylene oxide,
polymerization alkenyl glycidyl
ether sulfate
P-08-0062 11/01/07 01/29/08 Reichhold, Inc. (S) Topcoats for (G) Urethane modified
industrial equipment vegetable oil,
epoxidized polymer
P-08-0063 11/01/07 01/29/08 CBI (S) Extrusion of (G) Polyamide based
tubing systems; on alkanedioic acid,
injection molding of alkyl lactam and
special applications polyoxyalkylene
P-08-0064 11/02/07 01/30/08 CBI (G) An open non- (G) Rosin modified
dispersive use phenolic resin
P-08-0065 11/01/07 01/29/08 CBI (G) Rheology additive (G) Urethane-urea
P-08-0066 11/01/07 01/29/08 CBI (G) Rheology additive (G) Urethane-urea
P-08-0067 11/05/07 02/02/08 CIBA Corporation (S) Pigment for (G) 1',1'''-[1,4-
printing ink used in phenylenebis(methyle
time-temperature ne)]bis[1',3'-
indicator labeling dihydro-8-methoxy-
3'3,'-dimethyl-6-
nitro- aromatic
substituted indole
P-08-0068 11/05/07 02/02/08 Firmenich Inc. (S) Aroma for use in (S) Definition:
fragrance mixtures, Extractives and
which in turn are their physically
used in perfumes, modified
soaps, cleansers, derivatives. Schinus
etc. Terebinthifolius.
P-08-0068 11/05/07 02/02/08 Firmenich Inc. (S) Aroma for use in (S) Oils, schinus
fragrance mixtures, terebinthifolius
which in turn are
used in perfumes,
soaps, cleansers,
etc.
P-08-0069 11/05/07 02/02/08 CBI (G) Fuel additive- (G) Alkenyl
destructive use succinimide
P-08-0070 11/05/07 02/02/08 CBI (G) Coating (G) Fluorosilicone
P-08-0071 11/05/07 02/02/08 CBI (G) Coating (G) Fluorosilicone
P-08-0072 11/05/07 02/02/08 CBI (G) Thickener for (G) Poly
inorganic materials (methacryloyloxyalky
l trialkylammonium
salt)
P-08-0073 11/06/07 02/03/08 CBI (S) Crosslinker for (G) Aliphatic
coatings and polyisocyanate, C16-
adhesives alcohol and
polyalkylene glycol-
blocked
P-08-0074 11/06/07 02/03/08 CBI (S) Crosslinker for (G) Aliphatic
coatings and polyisocyanate, C16-
adhesives alcohol and
polyalkylene glycol-
blocked
P-08-0075 11/06/07 02/03/08 CBI (G) Paint (G) Polyisocyanate
resin
P-08-0076 11/07/07 02/04/08 CBI (G) For application (G) Disubstituted
to cellulosic phenylazo
substrates naphthalenstrisulfon
ic acid, salt
[[Page 3962]]
P-08-0077 11/13/07 02/10/08 Orient Corporation of (S) Charge stabilizer (S) Ferrate(1-),
America for electro-photo bis[4-[2-[5-(1,1-
copy toner dimethylethyl)-2-
(hydroxy-
.kappa.o)phenyl]diaz
enyl]-.kappa.n1]-3-
(hydroxy-.kappa.o]-n-
phenyl-2-
naphthalenecarboxami
dato(2-)], hydrogen
(1:1)
P-08-0078 11/13/07 02/10/08 CBI (S) PMN material in (G) Plant oil
fragrance products
P-08-0079 11/13/07 02/10/08 Reichhold, Inc. (S) Resin for paints/ (G) Amine salt of
coatings polyester polyol,
hydroxy substituted
carboxylic acid,
cycloaliphatic
glycol, aliphatic
diisocyanate and
hydroxy substituted
alkylamines.
P-08-0080 11/13/07 02/10/08 Reichhold, Inc. (S) Resin for paints/ (G) Amine salt of
coatings polyester polyol,
cycloaliphatic
glycol, hydroxy
substituted
carboxylic acid,
alkyldiamine and
aliphatic
diisocyanate
P-08-0081 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers
P-08-0082 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, potassium
salts
P-08-0083 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, compound
with ethanolamine
P-08-0084 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, compound
with triethanolamine
P-08-0085 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, compound
with branched 3-
(tridecyloxy)-1-
propanamine
P-08-0086 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Amines, C12 14-
Additives fluid component tert-alkyl,
compounds with
maleated soybean oil
ester with
polyethylene glycol
mono-C12 16-alkyl
ethers
P-08-0087 11/14/07 02/11/08 CBI (G) Lubricant (G) Alkyl acid
additive open, non- reaction products
dispersive use with metal salt of
alkyl alcohol
P-08-0088 11/14/07 02/11/08 CBI (G) Emulsifier (G)
Perfluorodioxyalkoni
cacid salt
P-08-0089 11/15/07 02/12/08 CBI (G) Component of (G) Fatty acid oils
paint polymer with
aromatic acid,
acrylates, styrene,
polyol and
conjugated
anhydrides
P-08-0090 11/01/07 01/29/08 CBI (G) Modifier for (G) Epoxy liquid
epoxy formulations polysulfide
P-08-0091 11/13/07 02/10/08 Sasol North America (S) Polymer (S) Oxirane, 2-[[3-
Inc. performance additive (trimethoxysilyl)pro
poxy]methyl]-,
reaction products
with boehmite
(al(oh)o)
P-08-0092 11/13/07 02/10/08 Sasol North America (S) Polymer (S) Oxirane, 2-[[3-
Inc. performance additive (trimethoxysilyl)pro
poxy]methyl]-,
reaction products
