Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 3451-3452 [E8-869]
Download as PDF
<![CDATA[
3451
Federal Register / Vol. 73, No. 13 / Friday, January 18, 2008 / Notices
Comments on this certification are
invited. Commenters should identify the
statement(s) underlying the certification
on which they are providing additional
information.
End of Certification
The following products are proposed
for deletion from the Procurement List:
Products
Hat, Sun, Universal Camouflage, ACU
NSN: 8415–01–519–8678—Size 6.375.
NSN: 8415–01–519–8680—Size 6.5.
NSN: 8415–01–519–8681—Size 6.625.
NSN: 8415–01–519–8682—Size 6.75.
NSN: 8415–01–519–8684—Size 6.875.
NSN: 8415–01–519–8687—Size 7.
NSN: 8415–01–519–8696—Size 7.125.
NSN: 8415–01–519–8698—Size 7.25.
NSN: 8415–01–519–8699—Size 7.375.
NSN: 8415–01–519–8702—Size 7.5.
NSN: 8415–01–519–8704—Size 7.625.
NSN: 8415–01–519–8705—Size 7.75.
NSN: 8415–01–519–8706—Size 7.875.
NSN: 8415–01–519–8708—Size 8.
NPA: Human Technologies Corporation,
Utica, NY.
Contracting Activity: Defense Supply Center
Philadelphia, Philadelphia, PA.
Rochester Midland Envirocare Products
DEPARTMENT OF COMMERCE
NSN: 7930–01–512–7170—LiquiBac.
NPA: Lighthouse for the Blind, St. Louis,
MO.
Contracting Activity: General Services
Administration, Office Supplies & Paper
Products Acquisition Ctr, New York, NY.
Economic Development Administration
Notice of Petitions by Firms for
Determination of Eligibility To Apply
for Trade Adjustment Assistance
Economic Development
Administration, Department of
Commerce.
ACTION: Notice and Opportunity for
Public Comment.
AGENCY:
Trunk Locker, Plastic
NSN: 8460–01–471–1024—Green (Olive
drab), Small.
NSN: 8460–01–471–1035—Green (Olive
drab), Large.
NPA: Walterboro Vocational Rehabilitation
Center, Walterboro, SC.
Contracting Activity: Defense Supply Center
Philadelphia, Philadelphia, PA.
Kimberly M. Zeich,
Director, Program Operations.
[FR Doc. E8–885 Filed 1–17–08; 8:45 am]
BILLING CODE 6353–01–P
Pursuant to section 251 of the Trade
Act of 1974 (19 U.S.C. 2341 et seq.), the
Economic Development Administration
(EDA) has received petitions for
certification of eligibility to apply for
Trade Adjustment Assistance from the
firms listed below. EDA has initiated
separate investigations to determine
whether increased imports into the
United States of articles like or directly
competitive with those produced by
each firm contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT DECEMBER
1, 2007 THROUGH DECEMBER 31, 2007
Date accepted
for filing
Firm
Address
Electronic Systems, Inc. ..........................
600 E. 50th Street North, P.O. Box
5013, Sioux Falls, SD 57104.
5150 N. 24th Street, Phoenix, AZ 95016
12/1/2007
Williams & Hussey Machine Company,
Inc.
70 Power Street, Milford, NH 03055 .......
12/1/2007
Matador Tool & Die, Inc ..........................
JKK Machine & Engine, LLC ...................
1959 Will Street, NW., Grand, MI 49504
PO Box 13672, Alexandria, LA 71315 ....
12/1/2007
12/20/2007
John J Steuby Company .........................
6002 N. Lindbergh, Hazelwood, MO
63042.
1301 N. Old Hwy 77 and 81 S., Hillsboro, TX 76645.
12/20/2007
Machine Tool Automation Corp dba
Bayer.
rwilkins on PROD1PC63 with NOTICES
Cen-Tex Seed & Delinting, Inc ................
VerDate Aug<31>2005
16:37 Jan 17, 2008
Jkt 214001
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
12/1/2007
Products
Printed circuit boards and other electronic component assemblies.
Designs and manufactures machine tool
accessories and workholding components. Products include automated
and manual pallet switching systems,
custom pallets and tooling designed to
shorten setup time for vertical machining centers.
Woodworking machinery as well as accessories and knives to accompany
the machines.
Molds for metals and plastics.
Rebuilds diesel engines and custom
parts for industry use.
Precision machined fittings/valves.
12/28/2007
E:\FR\FM\18JAN1.SGM
18JAN1
3452
Federal Register / Vol. 73, No. 13 / Friday, January 18, 2008 / Notices
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
A written request for a hearing must be
submitted to the Office of Performance
Evaluation, Room 7009, Economic
Development Administration, U.S.
Department of Commerce, Washington,
DC 20230, no later than ten (10)
calendar days following publication of
this notice. Please follow the procedures
set forth in section 315.9 of EDA’s final
rule (71 FR 56704) for procedures for
requesting a public hearing. The Catalog
of Federal Domestic Assistance official
program number and title of the
program under which these petitions are
submitted is 11.313, Trade Adjustment
Assistance.
Dated: January 14, 2008.
William P. Kittredge,
Program Officer for TAA.
[FR Doc. E8–869 Filed 1–17–08; 8:45 am]
BILLING CODE 3510–24–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–485–803]
Certain Cut-to-Length Carbon Steel
Plate From Romania: Amended Final
Results of Antidumping Duty
Administrative Review Pursuant to
Final Court Decision
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: On November 7, 2007, the
United States Court of International
Trade (CIT) affirmed the final remand
results made by the Department of
Commerce (the Department) pursuant to
the CIT’s remand of the final results of
the antidumping duty administrative
review of the antidumping order on
certain cut-to-length carbon steel plate
from Romania. See Mittal Steel Galati
S.A., Formerly Known as Ispat Sidex
S.A. v. United States, Slip Op. 07–110
(CIT July 18, 2007) (Mittal Steel). As the
CIT’s decision affirming the final
remand results was not appealed to the
Court of Appeals for the Federal Circuit,
the CIT’s decision is final, and we are
amending the final results of the review
in this matter. We will instruct U.S.
Customs and Border Protection (CBP) to
liquidate entries subject to these
amended final results.
DATES: Effective Date: January 18, 2008.
FOR FURTHER INFORMATION: John Drury or
Angelica Mendoza, AD/CVD
Operations, Office 7, Import
Administration, U.S. Department of
Commerce, 14th Street and Constitution
rwilkins on PROD1PC63 with NOTICES
AGENCY:
VerDate Aug<31>2005
16:37 Jan 17, 2008
Jkt 214001
Avenue, NW., Washington, DC 20230;
telephone: (202) 482–0195 or (202) 482–
3019, respectively.
SUPPLEMENTARY INFORMATION:
Background
On March 15, 2005, the Department
published the final results of the
administrative review for certain cut-tolength carbon steel plate from Romania
covering the period August 1, 2002,
through July 31, 2003. See Certain Cutto-Length Carbon Steel Plate from
Romania: Notice of Final Results and
Final Partial Rescission of Antidumping
Duty Administrative Review, 70 FR
12651 (March 15, 2005) (Final Results),
and accompanying Issues and Decision
Memorandum. On April 13, 2005, Mittal
Steel Galati S.A. (Mittal) filed a
summons at the CIT challenging the
Final Results. On July 18, 2007, the
Court issued its opinion in Mittal Steel
remanding two issues to the Department
(i.e., the Department’s decision to value
iron scrap as a material input and the
Department’s choice of a surrogate value
for limestone), and affirming the
Department on a third issue (i.e., the
Department’s rejection of the use of data
from Mittal’s Algerian affiliate in
deriving surrogate financial ratios). The
CIT also did not order the re-liquidation
of certain entries of subject merchandise
that were liquidated prior to the
expiration of the statutory time limit for
appeal, and prior to Mittal’s application
for a preliminary injunction, as Mittal
had requested.
In accordance with the CIT’s remand
order, the Department filed its remand
results on October 1, 2007. In those
remand results, the Department
provided an offset for scrap generated
and re-used in the production process
by Mittal, and reconsidered its valuation
of the limestone input used to
manufacture cut-to-length carbon steel
plate for this proceeding. As a result, the
Department recalculated the
antidumping duty rate applicable to
Mittal at 7.29 percent for the period of
review.
On November 7, 2007, the CIT
affirmed the Department’s final results
pursuant to remand. See Mittal Steel
Galati S.A., Formerly Known as Ispat
Sidex S.A. v. United States, Slip Op.
07–164 (CIT November 7, 2007) . There
was no appeal of the CIT’s decision to
the U.S. Court of Appeals for the
Federal Circuit filed within the appeal
period. Therefore, the CIT’s decision is
now final and conclusive.
Amendment to Final Results
We are now amending the final
results of this administrative review to
reflect the final and conclusive decision
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
of the CIT. The changes to our
calculations with respect to Mittal
resulted in a change in the weightedaverage margin from 13.50 percent to
7.29 percent for the period of review.
The Department will instruct CBP to
liquidate entries of certain cut-to-length
carbon steel plate from Romania
produced by, exported to, or imported
into the United States by Mittal during
the review period at the assessment
rates the Department calculated for
these amended final results of review.
We intend to issue the assessment
instructions to CBP 15 days after the
date of publication of these amended
final results of review.
We are issuing and publishing these
results in accordance with sections
751(a)(1) and 777(i)(1) of the Tariff Act
of 1930, as amended.
Dated: January 11, 2008.
David Spooner,
Assistant Secretary for Import
Administration.
[FR Doc. E8–898 Filed 1–17–08; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–894]
Certain Tissue Paper Products From
the People’s Republic of China:
Extension of Preliminary Results of
Antidumping Duty Administrative
Review
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(‘‘the Department’’) is extending the
time limit for the preliminary results of
the administrative review of certain
tissue paper products from the People’s
Republic of China (‘‘PRC’’). This review
covers the period March 1, 2006,
through February 28, 2007.
DATES: Effective Date: January 18, 2008.
FOR FURTHER INFORMATION CONTACT:
Bobby Wong, AD/CVD Operations,
Office 9, Import Administration,
International Trade Administration,
U.S. Department of Commerce, 14th
Street and Constitution Avenue, NW.,
Washington, DC 20230; telephone: (202)
482–0409.
AGENCY:
Background
On March 30, 2005, the Department
published in the Federal Register an
antidumping duty order covering
certain tissue paper from the People’s
Republic of China (‘‘PRC’’). See Notice
of Amended Final Determination of
E:\FR\FM\18JAN1.SGM
18JAN1
]]>Agencies
[Federal Register Volume 73, Number 13 (Friday, January 18, 2008)]
[Notices]
[Pages 3451-3452]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-869]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for Determination of Eligibility To
Apply for Trade Adjustment Assistance
AGENCY: Economic Development Administration, Department of Commerce.
ACTION: Notice and Opportunity for Public Comment.
-----------------------------------------------------------------------
Pursuant to section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et
seq.), the Economic Development Administration (EDA) has received
petitions for certification of eligibility to apply for Trade
Adjustment Assistance from the firms listed below. EDA has initiated
separate investigations to determine whether increased imports into the
United States of articles like or directly competitive with those
produced by each firm contributed importantly to the total or partial
separation of the firm's workers, or threat thereof, and to a decrease
in sales or production of each petitioning firm.
List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment December 1,
2007 Through December 31, 2007
----------------------------------------------------------------------------------------------------------------
Date accepted
Firm Address for filing Products
----------------------------------------------------------------------------------------------------------------
Electronic Systems, Inc................. 600 E. 50th Street North, 12/1/2007 Printed circuit boards and
P.O. Box 5013, Sioux other electronic
Falls, SD 57104. component assemblies.
Machine Tool Automation Corp dba Bayer.. 5150 N. 24th Street, 12/1/2007 Designs and manufactures
Phoenix, AZ 95016. machine tool accessories
and workholding
components. Products
include automated and
manual pallet switching
systems, custom pallets
and tooling designed to
shorten setup time for
vertical machining
centers.
Williams & Hussey Machine Company, Inc.. 70 Power Street, Milford, 12/1/2007 Woodworking machinery as
NH 03055. well as accessories and
knives to accompany the
machines.
Matador Tool & Die, Inc................. 1959 Will Street, NW., 12/1/2007 Molds for metals and
Grand, MI 49504. plastics.
JKK Machine & Engine, LLC............... PO Box 13672, Alexandria, 12/20/2007 Rebuilds diesel engines
LA 71315. and custom parts for
industry use.
John J Steuby Company................... 6002 N. Lindbergh, 12/20/2007 Precision machined
Hazelwood, MO 63042. fittings/valves.
Cen-Tex Seed & Delinting, Inc........... 1301 N. Old Hwy 77 and 81 12/28/2007
S., Hillsboro, TX 76645.
----------------------------------------------------------------------------------------------------------------
[[Page 3452]]
Any party having a substantial interest in these proceedings may
request a public hearing on the matter. A written request for a hearing
must be submitted to the Office of Performance Evaluation, Room 7009,
Economic Development Administration, U.S. Department of Commerce,
Washington, DC 20230, no later than ten (10) calendar days following
publication of this notice. Please follow the procedures set forth in
section 315.9 of EDA's final rule (71 FR 56704) for procedures for
requesting a public hearing. The Catalog of Federal Domestic Assistance
official program number and title of the program under which these
petitions are submitted is 11.313, Trade Adjustment Assistance.
Dated: January 14, 2008.
William P. Kittredge,
Program Officer for TAA.
[FR Doc. E8-869 Filed 1-17-08; 8:45 am]
BILLING CODE 3510-24-P
