Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance, 72344-72345 [07-6119]

Download as PDF 72344 Federal Register / Vol. 72, No. 244 / Thursday, December 20, 2007 / Notices Tahoe Basin Management Unit at the contact address stated above. Dated: December 11, 2007. Terri Marceron, Forest Supervisor. [FR Doc. 07–6114 Filed 12–19–07; 8:45 am] BILLING CODE 3410–11–M DEPARTMENT OF AGRICULTURE Forest Service USDA Notice of Proposed New Fee Site on the Inyo National Forest USDA Forest Service, Notice of Proposed New Fee AGENCY: ACTION: Site. The Inyo National Forest, White Mountain Ranger District is proposing to implement fees at a complex of three group camp sites in the White Mountains east of Bishop, California. The proposed fee structure is based on the level of services and amenities provided, cost of operation and maintenance, market assessment and public comments. Fee monies would be used to provide maintenance services, trash hauling, restroom servicing (pumping and hauling of waste), road maintenance into the sites and other direct costs. The group camp sites, known as the Cedar Flat Group Campsgrounds, were constructed in 2005 as part of a special use permit condition for a large scientific research facility. They are used primarily by colleges, universities, and other educational groups for a ‘‘base facility’’ for their geology field camps, natural history studies and other academic pursuits. They are particularly well suited for this use as they are in close proximity to the geologic areas of SUMMARY: study. Additionally, they are in a terrain and vegetation type that allows for dispersed tent use but has a common area for (outdoor) meetings, eating and socializing. Each group site contains a concrete pad under a shade ramada for picnic tables, a developed parking area, interpretive exhibits, and group working areas. Additionally, all the sites have new sealed vault type toilets, a fire ring and dumpster type trash bins. The sites are of varying sizes and have capacities of 50, 30 and 25 campers. The larger site also has room to park a limited number of recreational vehicles. The fee for each of the sites is proposed to be set at $25 per night. Traditional use of the old group campsites, removed in 2004, has been longer stays such as two and three weeks for field studies of geology or natural history as part of an academic field camp. No other group site opportunities are available in the vicinity. These sites also have the advantage of being isolated which facilitates group use, evening lighting and later night studying and data preparation by college students, the primary users of these facilities. Funds derived from the fees would be used to provide regular maintenance services, contract trash hauling and toilet pumping. DATES: The proposed fee would become effective June 15, 2008. FOR FURTHER INFORMATION CONTACT: John Louth, Interpretive Specialist, White Mountain Ranger Station, 798 North Main Street, Bishop, CA 93514; (760) 873–2514. SUPPLEMENTARY INFORMATION: The Federal Recreation Lands Enhancement Act (Title VII, Pub. L. 108–447) directs the Secretary of Agriculture to publish a six month advance notice in the Federal Register whenever new recreation fee areas are established. The intent of this notice is to inform the public of a new fee site. This new fee will be reviewed by a Recreation Resource Advisory Committee prior to a final decision and implementation. Dated: November 29, 2007. Jim Upchurch, Forest Supervisor, Inyo National Forest. [FR Doc. 07–6045 Filed 12–19–07; 8:45 am] BILLING CODE 3410–11–P DEPARTMENT OF COMMERCE Economic Development Administration Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance Economic Development Administration, Department of Commerce ACTION: Notice and Opportunity for Public Comment. AGENCY: Pursuant to section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm’s workers, or threat thereof, and to a decrease in sales or production of each petitioning firm. LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT [October 25, 2007 through November 30, 2007] Date accepted for filing Firm Address Steel Ventures, LLC dba Ex-LTube. Cramer Wood Products, Inc ..... 811 Atlantic Street, N., Kansas City, MO 64116–4259. 600 North Scientific Street, High Point, NC 27260. 10/25/2007 Steel tubing and standard pipe. 10/29/2007 Advent Tool & Mold, Inc. .......... 999 Ridgeway Avenue, Rochester, NY 14615. 124 King Court, New Holland, PA 17557. 16869 Ward Creek Road, Cedaredge, Co 81413. 7301 N.W. 50th St., Oklahoma City, OK 73132. 10/29/2007 Manufactures and markets high qualify wood veneer products. The firm processes veneers from exotic and domestic woods, providing architectural panels and cut-to-size splicing as well as more traditional veneer sheets. Design and build custom injection molds and manufacture precision injection molded plastic parts and assemblies. Furniture manufacturer, primarily chairs. Designs: 18th & 19th century: Pennsylvania, German, and Craftman. Folding kayaks. sroberts on PROD1PC70 with NOTICES Martin’s Chair, Inc. .................... Long Haul Products, Inc. .......... The Servicenter ........................ VerDate Aug<31>2005 20:08 Dec 19, 2007 Jkt 214001 PO 00000 Frm 00004 11/1/2007 11/2/2007 11/5/2007 Fmt 4703 Sfmt 4703 Products Manufacturer of consumable and custom aircraft parts (specific to plane type & model). Includes detailed drawing illustration part dimensions and exact area for drilling rivet holes. E:\FR\FM\20DEN1.SGM 20DEN1 Federal Register / Vol. 72, No. 244 / Thursday, December 20, 2007 / Notices 72345 LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT— Continued [October 25, 2007 through November 30, 2007] Date accepted for filing Firm Address Cable Manufacturing & Assembly. Duraspec Electroplating, Inc ..... 10896 Industrial Parkway, NW., Bolivar, OH 44612. 87–83 139th Street, Jamaica, NY 11435. 11/5/2007 Spring Team, Inc. ..................... 2851 Industrial Park Drive, Austinburg, OH 44010. 915 Estes Court, Schaumburg, IL 60193–4427. Frist and South Streets, Lehighton, PA 18235. 51100 Grand River Ave., Wixom, MI 48393. 5150 N. 24th Street, Phoenix, AZ 95016. 11/7/2007 W.J. Die Mold, Inc. ................... Lehighton Electronics, Inc ........ Fame Industries, Inc. ................ Machine Tool Automation Corp. dba Bayer. Wadsworth Control Systems, Inc. Action Graphix, LLC ................. S & K Electronics, Inc ............... London Grove Industries, Inc ... Tres Bonne, Inc ........................ Sound to Earth, LTD ................. Standley Brothers Machine ...... Wadsworth Control Systems, Inc. Universal Forest Products (235) The Nugget Company, Inc ....... sroberts on PROD1PC70 with NOTICES Davis Tool & Die Co., Inc ......... 20:08 Dec 19, 2007 Plastic injection, compression, insert and die cast molds. 11/13/2007 Instruments for measuring and control. 11/14/2007 Conveyors and conveying equipment. 11/15/2007 Designs and manufactures machine tool accessories and workholding components. Products include automated and manual pallet switching systems, custom pallets and tooling designed to shorten setup time for vertical machining centers. Process control systems and apparatus for temperature control in greenhouses. Dynamic motion signs. 11/15/2007 431 W. Baltimore Pike, West Grove, PA 19390. 3841 First Avenue South, Seattle, WA 98134. 11/20/2007 5400 Frontage Road, Manhattan, MT 59741. 96 Park Street, P.O. Box 85, Beverly, MA 01915. 11/27/2007 5541 Marshall Street, Arvado, CO 80002. 26200 Nowell Road, Thornton, CA 95686. 139 Kemper Street, San Antonio, TX 78207. 888 Bolger Court, Fenton, MO 63026. 11/28/2007 Jkt 214001 Stranded cables, less than 3⁄8″ in diameter, of steel and stainless steel. Metal aircraft, dental, and X–Ray parts including screws, bolts, tubes, fittings, & mountings that are plated and polished with a variety of finishes. Springs and wire forms. 11/13/2007 5541 Marshall Street, Arvada, CO 80002. 2623 Commerce Drive, Jonesboro, AR 72401. 56301 US Highway 93, Roman, MT 59864. Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Office of Performance Evaluation, Room 7009, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in section 315.9 of EDA’s final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are VerDate Aug<31>2005 11/5/2007 Products 11/19/2007 11/20/2007 11/20/2007 Electronic components and parts, specializing in electronic circuits and assemblies for firms in areas such as telecommunications, aerospace, marine and government. Household furniture and custom kitchen cabinets. 11/29/2007 Apparel including work wear, sports and outdoor wear, as well as children’s wear. For example, women’s and men’s gloves, pants, and jackets. There is no resale. Manufactures string instruments such as mandolins and guitars. It also manufactures accessories for these instruments. Custom precision machining products are best suited for aluminum and stainless steel families of material. Additionally, they work with steel, different types of plastic, copper, lead, and titanium. Process control systems and apparatus for temperature control in greenhouses. Lumber remanufacturer and distributor. Value added lumber products. Tanned and processed lambskin hides. 11/30/2007 Moulds for metal parts. 11/27/2007 11/29/2007 submitted is 11.313, Trade Adjustment Assistance. DEPARTMENT OF DEFENSE Dated: December 14, 2007. William P. Kittredge, Program Officer for TAA. [FR Doc. 07–6119 Filed 12–19–07; 8:45 am] GENERAL SERVICES ADMINISTRATION NATIONAL AERONAUTICS AND SPACE ADMINISTRATION BILLING CODE 3510–24–M PO 00000 [OMB Control No. 9000–0134] Submission for OMB Review; Environmentally Sound Products Department of Defense (DOD), General Services Administration (GSA), and National Aeronautics and Space Administration (NASA). AGENCIES: Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\20DEN1.SGM 20DEN1

Agencies

[Federal Register Volume 72, Number 244 (Thursday, December 20, 2007)]
[Notices]
[Pages 72344-72345]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 07-6119]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Economic Development Administration


Notice of Petitions by Firms for Determination of Eligibility To 
Apply for Trade Adjustment Assistance

AGENCY:  Economic Development Administration, Department of Commerce

ACTION:  Notice and Opportunity for Public Comment.

-----------------------------------------------------------------------

    Pursuant to section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et 
seq.), the Economic Development Administration (EDA) has received 
petitions for certification of eligibility to apply for Trade 
Adjustment Assistance from the firms listed below. EDA has initiated 
separate investigations to determine whether increased imports into the 
United States of articles like or directly competitive with those 
produced by each firm contributed importantly to the total or partial 
separation of the firm's workers, or threat thereof, and to a decrease 
in sales or production of each petitioning firm.

        List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment
                                  [October 25, 2007 through November 30, 2007]
----------------------------------------------------------------------------------------------------------------
                                                             Date
              Firm                       Address           accepted                    Products
                                                          for filing
----------------------------------------------------------------------------------------------------------------
Steel Ventures, LLC dba Ex-L-    811 Atlantic Street,     10/25/2007  Steel tubing and standard pipe.
 Tube.                            N., Kansas City, MO
                                  64116-4259.
Cramer Wood Products, Inc......  600 North Scientific     10/29/2007  Manufactures and markets high qualify wood
                                  Street, High Point,                  veneer products. The firm processes
                                  NC 27260.                            veneers from exotic and domestic woods,
                                                                       providing architectural panels and cut-to-
                                                                       size splicing as well as more traditional
                                                                       veneer sheets.
Advent Tool & Mold, Inc........  999 Ridgeway Avenue,     10/29/2007  Design and build custom injection molds
                                  Rochester, NY 14615.                 and manufacture precision injection
                                                                       molded plastic parts and assemblies.
Martin's Chair, Inc............  124 King Court, New       11/1/2007  Furniture manufacturer, primarily chairs.
                                  Holland, PA 17557.                   Designs: 18th & 19th century:
                                                                       Pennsylvania, German, and Craftman.
Long Haul Products, Inc........  16869 Ward Creek Road,    11/2/2007  Folding kayaks.
                                  Cedaredge, Co 81413.
The Servicenter................  7301 N.W. 50th St.,       11/5/2007  Manufacturer of consumable and custom
                                  Oklahoma City, OK                    aircraft parts (specific to plane type &
                                  73132.                               model). Includes detailed drawing
                                                                       illustration part dimensions and exact
                                                                       area for drilling rivet holes.

[[Page 72345]]

 
Cable Manufacturing & Assembly.  10896 Industrial          11/5/2007  Stranded cables, less than \3/8\ in diameter, of steel and stainless
                                  Bolivar, OH 44612.                   steel.
Duraspec Electroplating, Inc...  87-83 139th Street,       11/5/2007  Metal aircraft, dental, and X-Ray parts
                                  Jamaica, NY 11435.                   including screws, bolts, tubes, fittings,
                                                                       & mountings that are plated and polished
                                                                       with a variety of finishes.
Spring Team, Inc...............  2851 Industrial Park      11/7/2007  Springs and wire forms.
                                  Drive, Austinburg, OH
                                  44010.
W.J. Die Mold, Inc.............  915 Estes Court,         11/13/2007  Plastic injection, compression, insert and
                                  Schaumburg, IL 60193-                die cast molds.
                                  4427.
Lehighton Electronics, Inc.....  Frist and South          11/13/2007  Instruments for measuring and control.
                                  Streets, Lehighton,
                                  PA 18235.
Fame Industries, Inc...........  51100 Grand River        11/14/2007  Conveyors and conveying equipment.
                                  Ave., Wixom, MI 48393.
Machine Tool Automation Corp.    5150 N. 24th Street,     11/15/2007  Designs and manufactures machine tool
 dba Bayer.                       Phoenix, AZ 95016.                   accessories and workholding components.
                                                                       Products include automated and manual
                                                                       pallet switching systems, custom pallets
                                                                       and tooling designed to shorten setup
                                                                       time for vertical machining centers.
Wadsworth Control Systems, Inc.  5541 Marshall Street,    11/15/2007  Process control systems and apparatus for
                                  Arvada, CO 80002.                    temperature control in greenhouses.
Action Graphix, LLC............  2623 Commerce Drive,     11/19/2007  Dynamic motion signs.
                                  Jonesboro, AR 72401.
S & K Electronics, Inc.........  56301 US Highway 93,     11/20/2007  Electronic components and parts,
                                  Roman, MT 59864.                     specializing in electronic circuits and
                                                                       assemblies for firms in areas such as
                                                                       telecommunications, aerospace, marine and
                                                                       government.
London Grove Industries, Inc...  431 W. Baltimore Pike,   11/20/2007  Household furniture and custom kitchen
                                  West Grove, PA 19390.                cabinets.
Tres Bonne, Inc................  3841 First Avenue        11/20/2007  Apparel including work wear, sports and
                                  South, Seattle, WA                   outdoor wear, as well as children's wear.
                                  98134.                               For example, women's and men's gloves,
                                                                       pants, and jackets. There is no resale.
Sound to Earth, LTD............  5400 Frontage Road,      11/27/2007  Manufactures string instruments such as
                                  Manhattan, MT 59741.                 mandolins and guitars. It also
                                                                       manufactures accessories for these
                                                                       instruments.
Standley Brothers Machine......  96 Park Street, P.O.     11/27/2007  Custom precision machining products are
                                  Box 85, Beverly, MA                  best suited for aluminum and stainless
                                  01915.                               steel families of material. Additionally,
                                                                       they work with steel, different types of
                                                                       plastic, copper, lead, and titanium.
Wadsworth Control Systems, Inc.  5541 Marshall Street,    11/28/2007  Process control systems and apparatus for
                                  Arvado, CO 80002.                    temperature control in greenhouses.
Universal Forest Products (235)  26200 Nowell Road,       11/29/2007  Lumber remanufacturer and distributor.
                                  Thornton, CA 95686.                  Value added lumber products.
The Nugget Company, Inc........  139 Kemper Street, San   11/29/2007  Tanned and processed lambskin hides.
                                  Antonio, TX 78207.
Davis Tool & Die Co., Inc......  888 Bolger Court,        11/30/2007  Moulds for metal parts.
                                  Fenton, MO 63026.
----------------------------------------------------------------------------------------------------------------

    Any party having a substantial interest in these proceedings may 
request a public hearing on the matter. A written request for a hearing 
must be submitted to the Office of Performance Evaluation, Room 7009, 
Economic Development Administration, U.S. Department of Commerce, 
Washington, DC 20230, no later than ten (10) calendar days following 
publication of this notice. Please follow the procedures set forth in 
section 315.9 of EDA's final rule (71 FR 56704) for procedures for 
requesting a public hearing. The Catalog of Federal Domestic Assistance 
official program number and title of the program under which these 
petitions are submitted is 11.313, Trade Adjustment Assistance.

    Dated: December 14, 2007.
William P. Kittredge,
Program Officer for TAA.
[FR Doc. 07-6119 Filed 12-19-07; 8:45 am]
BILLING CODE 3510-24-M
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.