Notice of Petitions by Firms for Determination of Eligibility to Apply for Trade Adjustment Assistance, 61325-61326 [E7-21307]
Download as PDF
<![CDATA[
Federal Register / Vol. 72, No. 209 / Tuesday, October 30, 2007 / Notices
option to password protect their
accounts.
DEPARTMENT OF COMMERCE
Done at Washington, DC, on: October 24,
2007.
F. Edward Scarbrough,
U.S. Manager for Codex Alimentarius.
[FR Doc. E7–21315 Filed 10–29–07; 8:45 am]
Notice of Petitions by Firms for
Determination of Eligibility to Apply for
Trade Adjustment Assistance
BILLING CODE 3410–DM–P
Economic Development Administration
Economic Development
Administration, Department of
Commerce
ACTION: Notice and opportunity for
public comment.
AGENCY:
Pursuant to Section 251 of the Trade
Act of 1974 (19 U.S.C. 2341 et seq.), the
61325
Economic Development Administration
(EDA) has received petitions for
certification of eligibility to apply for
Trade Adjustment Assistance from the
firms listed below. EDA has initiated
separate investigations to determine
whether increased imports into the
United States of articles like or directly
competitive with those produced by
each firm contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE ADJUSTMENT
ASSISTANCE FOR THE PERIOD
[September 10, 2007 through October 24, 2007]
Date
accepted for
filing
Firm
Address
T.I. Industries ............................
40 W. 12th Avenue, Lexington,
NC 27292.
9/25/2007
Nortic, Inc ..................................
6099 Judd Road, Oriskany, NY
13424–4218.
3841 First Avenue South, Seattle, WA 98134.
9/27/2007
9/28/2007
10/1/2007
Concrete forming products, decking, railing.
10/1/2007
Injection molded vacuum cleaner parts.
10/2/2007
Highly engineered structural powdered metal components.
10/2/2007
Injection molded plastic products.
10/2/2007
10/2/2007
Boat propellers for pleasure and commercial craft; industrial
propellers for mixing and aerating applications.
Travel trailers for housing and camping.
10/2/2007
Aluminum, zinc, and magnesium die castings.
10/5/2007
Sheet metal air cleaners and air filters.
10/7/2007
Wood furniture and kitchen cabinets.
10/9/2007
Plastic injection molded products
The New Mayflower Corporation.
12515 NE 95th St., Vancouver,
WA 98682.
2100 Avalon Street, Riverside,
CA 92509.
4001 West Military Highway,
McAllen, TX 78503.
101 DeLaum Road, St. Marys,
PA 15857.
548 S 1470 E, Springville, UT
84663.
1501
Buchanan
Avenue,
Grand Rapids, MI 49507.
3283 North 9 Mile Road, Casper, WY 82604.
635 E. Highland Rd., Macedonia, OH 44056–2185.
7140 Northland Drive, North
Brooklyn, MN 55428.
4531
Osuna
Road,
NE,
Albuqurque, NM 87109.
1701 Lee Street, Elk Grove, IL
60007.
170 Lehigh Avenue, Lakewood, NJ 08701.
215 North Fourth Street,
Jeannette, PA 15644.
3850 Munson Highway, Hudson, MI 49247.
80
Cambridge
Street,
Methuen, MA 01844.
3 Maxson Drive, Old Forge,
PA 18518.
Apparel including work wear, sports and outdoor wear, as well
as children’s wear. For example, women’s and men’s
gloves, pants.
Manufactures plastic molded products.
Loudspeaker Commponents,
LLC.
7596 U.S. Highway 61, South
Lancaster, WI 53813.
Tres Bonne, Inc ........................
Rex Plastics, Inc .......................
Universal Forest Products
Western Division, Inc.
Kings Prosperity L.P .................
Comtec Manufacturing Inc ........
Technology Design, Inc ............
Michigan Wheel Corporation ....
Teton Homes Corporation ........
Empire Die Casting ...................
Air Quality Engineering, Inc ......
Ernest Thompson & Company,
Inc.
MET Plastics, Inc ......................
GAR Products, Inc ....................
Jeannette Shade & Novelty
Company, Inc. dba.
RIMA Manufacturing Company
sroberts on PROD1PC70 with NOTICES
Sheltech Plastics, Inc ...............
Any party having a substantial
interest in these proceedings may
request a public hearing on the matter.
VerDate Aug<31>2005
20:46 Oct 29, 2007
Jkt 214001
9/28/2007
10/11/2007
Products
Raw materials including wood, veneers, finishing materials,
UV cured coating and hot transfer materials are used to
manufacture.
Plastic injection mold parts, primarily spools.
10/11/2007
Indoor and outdoor chairs for the restaurant and hotel industries.
Commercial lighting and decorative glass tile, bowls and
sinks.
Valve parts and similar precision turned products.
10/16/2007
Custom vacuum formed and pressure formed plastic products.
10/17/2007
Manufactures men’s tailored slacks, U.S. Postal uniforms,
school uniforms, and US Navy pants for a variety of brand
name resellers.
Parts of speaker cones and dust caps.
10/11/2007
10/17/2007
A written request for a hearing must be
submitted to the Office of Performance
Evaluation, Room 7009, Economic
PO 00000
Frm 00002
Fmt 4703
Sfmt 4703
Development Administration, U.S.
Department of Commerce, Washington,
DC 20230, no later than ten (10)
E:\FR\FM\30OCN1.SGM
30OCN1
61326
Federal Register / Vol. 72, No. 209 / Tuesday, October 30, 2007 / Notices
calendar days following publication of
this notice. Please follow the procedures
set forth in Section 315.9 of EDA’s final
rule (71 FR 56704) for procedures for
requesting a public hearing.
The Catalog of Federal Domestic
Assistance official program number and
title of the program under which these
petitions are submitted is 11.313, Trade
Adjustment Assistance.
Dated: October 24, 2007.
William P. Kittredge,
Program Officer for TAA.
[FR Doc. E7–21307 Filed 10–29–07; 8:45 am]
In June of 2007, the Bureau of
Industry and Security (BIS) received
emergency preapproval for this
collection of information. However, the
final version of the associated rule
‘‘Revisions to License Requirements and
License Exception Eligibility for Certain
Thermal Imaging Cameras and Focal
Plane Arrays,’’ has not yet been
published. BIS is seeking renewal of this
collection authority so that publication
of the final rule will not be further
delayed by a lapse in the collection
authority.
BILLING CODE 3510–24–P
II. Method of Collection
DEPARTMENT OF COMMERCE
The biannual reports are paper format
and will be accepted via e-mail,
facsimile or mail delivery.
Bureau of Industry and Security
Proposed Information Collection;
Comment Request; Thermal Imaging
Camera Reporting
Bureau of Industry and
Security.
ACTION: Notice.
AGENCY:
SUMMARY: The Department of
Commerce, as part of its continuing
effort to reduce paperwork and
respondent burden, invites the general
public and other Federal agencies to
take this opportunity to comment on
proposed and/or continuing information
collections, as required by the
Paperwork Reduction Act of 1995.
DATES: Written comments must be
submitted on or before December 31,
2007.
Direct all written comments
to Diana Hynek, Departmental
Paperwork Clearance Officer,
Department of Commerce, Room 6625,
14th and Constitution Avenue, NW.,
Washington, DC 20230 (or via the
Internet at dHynek@doc.gov).
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the information collection
instrument and instructions should be
directed to Larry Hall, BIS ICB Liaison,
(202) 482–4896, lhall@bis.doc.gov.
SUPPLEMENTARY INFORMATION:
ADDRESSES:
sroberts on PROD1PC70 with NOTICES
I. Abstract
The U.S. Government is preparing to
remove the export licensing requirement
for certain thermal imaging cameras to
certain destinations. A new biannual
reporting requirement will be imposed
to allow the USG to verify that the
cameras are continuing to be sold to
appropriate end-users and that the
relaxation in controls is not jeopardizing
U.S. national security or foreign policy
interests.
VerDate Aug<31>2005
20:46 Oct 29, 2007
Jkt 214001
III. Data
OMB Control Number: 0694–0133.
Form Number(s): None.
Type of Review: Business or other forprofit organizations.
Estimated Number of Respondents:
30.
Estimated Time Per Response: 1 hour.
Estimated Total Annual Burden
Hours: 60.
Estimated Total Annual Cost to
Public: $0.
IV. Request for Comments
Comments are invited on: (a) Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden
(including hours and cost) of the
proposed collection of information; (c)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques
or other forms of information
technology.
Comments submitted in response to
this notice will be summarized and/or
included in the request for OMB
approval of this information collection;
they also will become a matter of public
record.
Dated: October 25, 2007.
Gwellnar Banks,
Management Analyst, Office of the Chief
Information Officer.
[FR Doc. E7–21346 Filed 10–29–07; 8:45 am]
BILLING CODE 3510–DT–P
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XD58
Endangered Species; File No. 1591
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Issuance of permit.
AGENCY:
SUMMARY: Notice is hereby given that
NMFS Southwest Fisheries Science
Center (Lisa Ballance, Responsible
Official), 8604 La Jolla Shores Drive, La
Jolla, CA 92038 has been issued a
permit to take green (Chelonia mydas),
loggerhead (Caretta caretta), and olive
ridley (Lepidochelys olivacea) sea
turtles for purposes of scientific
research.
The permit and related
documents are available for review
upon written request or by appointment
in the following offices:
Permits, Conservation and Education
Division, Office of Protected Resources,
NMFS, 1315 East-West Highway, Room
13705, Silver Spring, MD 20910; phone
(301)713–2289; fax (301)427–2521; and
Southwest Region, NMFS, 501 West
Ocean Blvd., Suite 4200, Long Beach,
CA 90802–4213; phone (562)980–4001;
fax (562)980–4018.
FOR FURTHER INFORMATION CONTACT:
Patrick Opay or Amy Hapeman,
(301)713–2289.
SUPPLEMENTARY INFORMATION: On
September 22, 2006, notice was
published in the Federal Register (71
FR 55431) that a request for a scientific
research permit to take green,
loggerhead, and olive ridley sea turtles
had been submitted by the above-named
organization. The requested permit has
been issued under the authority of the
Endangered Species Act of 1973, as
amended (ESA; 16 U.S.C. 1531 et seq.)
and the regulations governing the
taking, importing, and exporting of
endangered and threatened species (50
CFR parts 222 through 226).
Researchers will study the species
present at this foraging area to
determine their abundance, size ranges,
growth, sex ratio, health status, diving
behavior, local movements, habitat use,
and migration routes. Turtles will be
captured using entanglement nets and
each animal will be flipper and passive
integrated transponder (PIT) tagged,
measured, weighed, sexed, blood
sampled, and tissue sampled. A subset
of animals will be lavaged and have
transmitters attached to their carapace.
ADDRESSES:
E:\FR\FM\30OCN1.SGM
30OCN1
]]>Agencies
[Federal Register Volume 72, Number 209 (Tuesday, October 30, 2007)]
[Notices]
[Pages 61325-61326]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-21307]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for Determination of Eligibility to
Apply for Trade Adjustment Assistance
AGENCY: Economic Development Administration, Department of Commerce
ACTION: Notice and opportunity for public comment.
-----------------------------------------------------------------------
Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et
seq.), the Economic Development Administration (EDA) has received
petitions for certification of eligibility to apply for Trade
Adjustment Assistance from the firms listed below. EDA has initiated
separate investigations to determine whether increased imports into the
United States of articles like or directly competitive with those
produced by each firm contributed importantly to the total or partial
separation of the firm's workers, or threat thereof, and to a decrease
in sales or production of each petitioning firm.
List of Petitions Received by EDA For Certification of Eligibility To Apply for Trade Adjustment Assistance for
the Period
[September 10, 2007 through October 24, 2007]
----------------------------------------------------------------------------------------------------------------
Date
Firm Address accepted Products
for filing
----------------------------------------------------------------------------------------------------------------
T.I. Industries................ 40 W. 12th Avenue, 9/25/2007 Raw materials including wood, veneers,
Lexington, NC 27292. finishing materials, UV cured coating and
hot transfer materials are used to
manufacture.
Nortic, Inc.................... 6099 Judd Road, 9/27/2007 Plastic injection mold parts, primarily
Oriskany, NY 13424- spools.
4218.
Tres Bonne, Inc................ 3841 First Avenue 9/28/2007 Apparel including work wear, sports and
South, Seattle, WA outdoor wear, as well as children's wear.
98134. For example, women's and men's gloves,
pants.
Rex Plastics, Inc.............. 12515 NE 95th St., 9/28/2007 Manufactures plastic molded products.
Vancouver, WA 98682.
Universal Forest Products 2100 Avalon Street, 10/1/2007 Concrete forming products, decking,
Western Division, Inc. Riverside, CA 92509. railing.
Kings Prosperity L.P........... 4001 West Military 10/1/2007 Injection molded vacuum cleaner parts.
Highway, McAllen, TX
78503.
Comtec Manufacturing Inc....... 101 DeLaum Road, St. 10/2/2007 Highly engineered structural powdered
Marys, PA 15857. metal components.
Technology Design, Inc......... 548 S 1470 E, 10/2/2007 Injection molded plastic products.
Springville, UT 84663.
Michigan Wheel Corporation..... 1501 Buchanan Avenue, 10/2/2007 Boat propellers for pleasure and
Grand Rapids, MI commercial craft; industrial propellers
49507. for mixing and aerating applications.
Teton Homes Corporation........ 3283 North 9 Mile 10/2/2007 Travel trailers for housing and camping.
Road, Casper, WY
82604.
Empire Die Casting............. 635 E. Highland Rd., 10/2/2007 Aluminum, zinc, and magnesium die
Macedonia, OH 44056- castings.
2185.
Air Quality Engineering, Inc... 7140 Northland Drive, 10/5/2007 Sheet metal air cleaners and air filters.
North Brooklyn, MN
55428.
Ernest Thompson & Company, Inc. 4531 Osuna Road, NE, 10/7/2007 Wood furniture and kitchen cabinets.
Albuqurque, NM 87109.
MET Plastics, Inc.............. 1701 Lee Street, Elk 10/9/2007 Plastic injection molded products
Grove, IL 60007.
GAR Products, Inc.............. 170 Lehigh Avenue, 10/11/2007 Indoor and outdoor chairs for the
Lakewood, NJ 08701. restaurant and hotel industries.
Jeannette Shade & Novelty 215 North Fourth 10/11/2007 Commercial lighting and decorative glass
Company, Inc. dba. Street, Jeannette, PA tile, bowls and sinks.
15644.
RIMA Manufacturing Company..... 3850 Munson Highway, 10/11/2007 Valve parts and similar precision turned
Hudson, MI 49247. products.
Sheltech Plastics, Inc......... 80 Cambridge Street, 10/16/2007 Custom vacuum formed and pressure formed
Methuen, MA 01844. plastic products.
The New Mayflower Corporation.. 3 Maxson Drive, Old 10/17/2007 Manufactures men's tailored slacks, U.S.
Forge, PA 18518. Postal uniforms, school uniforms, and US
Navy pants for a variety of brand name
resellers.
Loudspeaker Commponents, LLC... 7596 U.S. Highway 61, 10/17/2007 Parts of speaker cones and dust caps.
South Lancaster, WI
53813.
----------------------------------------------------------------------------------------------------------------
Any party having a substantial interest in these proceedings may
request a public hearing on the matter. A written request for a hearing
must be submitted to the Office of Performance Evaluation, Room 7009,
Economic Development Administration, U.S. Department of Commerce,
Washington, DC 20230, no later than ten (10)
[[Page 61326]]
calendar days following publication of this notice. Please follow the
procedures set forth in Section 315.9 of EDA's final rule (71 FR 56704)
for procedures for requesting a public hearing.
The Catalog of Federal Domestic Assistance official program number
and title of the program under which these petitions are submitted is
11.313, Trade Adjustment Assistance.
Dated: October 24, 2007.
William P. Kittredge,
Program Officer for TAA.
[FR Doc. E7-21307 Filed 10-29-07; 8:45 am]
BILLING CODE 3510-24-P
