Pacific Gas and Electric Company; Notice of Application Tendered for Filing with the Commission and Establishing Procedural Schedule for Licensing and Deadline for Submission of Final Amendments, 58658-58660 [E7-20318]
Download as PDF
mmaher on PROD1PC70 with NOTICES
58658
Federal Register / Vol. 72, No. 199 / Tuesday, October 16, 2007 / Notices
g. Filed Pursuant to: Federal Power
Act, 16 U.S.C. 791a–825r.
h. Applicant Contact: Alan L. Peeples,
Alabama Power Company, 600 N. 18th
Street, P.O. Box 2641, Birmingham, AL
35291, (205) 257–1401.
i. FERC Contact: Henry Woo, (202)
502–8872.
j. Deadline for filing comments,
protests, or motions to intervene:
October 31, 2007. All documents
(original and eight copies) should be
filed with: Secretary, Federal Energy
Regulatory Commission, 888 First
Street, NE., Washington, DC 20426.
The Commission’s Rules of Practice
and Procedure require all intervenors
filing documents with the Commission
to serve a copy of that document on
each person in the official service list
for the project. Further, if an intervenor
files comments or documents with the
Commission relating to the merits of an
issue that may affect the responsibilities
of a particular resource agency, they
must also serve a copy of the document
on that resource agency. A copy of any
motion to intervene must also be served
upon each representative of the
Applicant specified in the particular
application.
k. Description of Request: The
Alabama Power Company (APC) is
requesting a temporary variance of the
reservoir drawdown limits of the Yates
and Thurlow Project license. APC
requests that it be allowed to draw
down the Thurlow pool to 283.0–284.5
feet from September 4, 2007, to January
11, 2008, for spillway board
maintenance. Included in APC’s request
was concurrence received from the
Alabama Department of Conservation
and Natural Resources.
l. Locations of the Application: A
copy of the application is available for
inspection and reproduction at the
Commission’s Public Reference Room,
located at 888 First Street, NE., Room
2A, Washington, DC 20426, or by calling
(202) 502–8371. This filing may also be
viewed on the Commission’s Web site at
https://www.ferc.gov using the
‘‘eLibrary’’ link. Enter the docket
number (P–2407) in the docket number
field to access the document. You may
also register online at https://
www.ferc.gov/docs-filing/
esubscription.asp to be notified via
e-mail of new filings and issuances
related to this or other pending projects.
For assistance, call 1–866–208–3676 or
e-mail FERCOnlineSupport@ferc.gov,
for TTY, call (202) 502–8659. A copy is
also available for inspection and
reproduction at the address in item (g)
above.
m. Individuals desiring to be included
on the Commission’s mailing list should
VerDate Aug<31>2005
04:12 Oct 16, 2007
Jkt 214001
so indicate by writing to the Secretary
of the Commission.
n. Comments, Protests, or Motions to
Intervene: Anyone may submit
comments, a protest, or a motion to
intervene in accordance with the
requirements of Rules of Practice and
Procedure, 18 CFR 385.210, .211, .214.
In determining the appropriate action to
take, the Commission will consider all
protests or other comments filed, but
only those who file a motion to
intervene in accordance with the
Commission’s Rules may become a
party to the proceeding. Any comments,
protests, or motions to intervene must
be received on or before the specified
comment date for the particular
application.
o. Filing and Service of Responsive
Documents: Any filings must bear in all
capital letters the title ‘‘COMMENTS’’,
‘‘PROTEST’’, OR ‘‘MOTION TO
INTERVENE’’, as applicable, and the
Project Number of the particular
application to which the filing refers.
p. Agency Comments: Federal, State,
and local agencies are invited to file
comments on the described application.
A copy of the application may be
obtained by agencies directly from the
Applicant. If an agency does not file
comments within the time specified for
filing comments, it will be presumed to
have no comments. One copy of an
agency’s comments must also be sent to
the Applicant’s representatives.
q. Comments, protests and
interventions may be filed electronically
via the Internet in lieu of paper. See, 18
CFR 385.2001(a)(1)(iii) and the
instructions on the Commission’s Web
site at https://www.ferc.gov under the
‘‘e-Filing’’ link. The Commission
strongly encourages electronic filings.
Kimberly D. Bose,
Secretary.
[FR Doc. E7–20317 Filed 10–15–07; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
Project No: P–803–087
Pacific Gas and Electric Company;
Notice of Application Tendered for
Filing with the Commission and
Establishing Procedural Schedule for
Licensing and Deadline for
Submission of Final Amendments
October 9, 2007.
Take notice that the following
hydroelectric application has been filed
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
with the Commission and is available
for public inspection.
a. Type of Application: New Major
License.
b. Project No.: P–803–087.
c. Date Filed: October 2, 2007.
d. Applicant: Pacific Gas and Electric
Company (PG&E).
e. Name of Project: DeSablaCenterville Hydroelectric Project.
f. Location: The existing project is
located on Butte Creek and the West
Branch Feather River in Butte County,
California. The project affects 145.7
acres of federal lands administered by
the Lassen National Forest, 2.1 acres of
federal lands administered by the
Plumas National Forest, and 11.6 acres
of federal lands administered by the
U.S. Bureau of Land Management.
g. Filed Pursuant to: Federal Power
Act 16 U.S.C. 791(a)–825(r).
h. Applicant Contact: Randal S.
Livingston, Vice President-Power
Generation, Pacific Gas and Electric
Company, P.O. Box 770000, Mail Code:
N11E, San Francisco, CA 94177;
Telephone (415) 973–7000.
i. FERC Contact: Aaron Liberty, (202)
502–6862 or aaron.liberty@ferc.gov.
j. This application is not ready for
environmental analysis at this time.
k. Project Description: The existing
DeSabla-Centerville Hydroelectric
Project is composed of three
developments, including Toadtown,
DeSabla, and Centerville, and has a
combined installed capacity of 26,400
kilowatts (kW).
The Toadtown development, which
diverts water from the West Branch
Feather River, consists of the following
constructed facilities: (1) Round Valley
Reservoir, a 98 acre reservoir with a
gross storage capacity of 1,700 acre-feet;
(2) Round Valley dam, an earthfill dam,
29-feet high and 810-feet long; (3) a 40foot wide overflow spillway; (4) a 15inch outlet pipe at the base of Round
Valley dam, and manual low level outlet
valve; (5) Philbrook Reservoir, a 173
acre reservoir with a gross storage
capacity of 4,985 acre-feet; (6) Philbrook
main dam (located on Philbrook Creek),
a compacted earthfill dam, 87-feet high
and 850-feet long; (7) Philbrook
auxiliary dam (170 feet to the right of
the main dam), a compacted earthfill
dam, 24-feet high and 470-feet long; (8)
a 29.7-foot wide spillway with 5
flashboard bays; (9) a 10.75-foot long
and 14.75-foot wide spillway with a
single, manual radial gate; (10) a 33-inch
diameter, 460-foot long outlet conduit
from Philbrook Reservoir; (11) a 17-foot
high, 8-feet diameter submerged vertical
concrete intake, controlled by a 30-inch
diameter manual needle valve; (12)
Hendricks Head Dam, a concrete gravity
E:\FR\FM\16OCN1.SGM
16OCN1
Federal Register / Vol. 72, No. 199 / Tuesday, October 16, 2007 / Notices
dam, 15-feet high with an overflow
spillway section 98-feet wide; (13) a
8.66-mile long Hendricks Canal,
composed mostly of earthen ditch with
several flume and tunnel sections, with
a capacity of 125 cfs; (14) feeder
diversions from 4 creeks into
Hendricks/Toadtown canal; (15) a 40inch diameter, 1,556-foot long steel
penstock; (16) Toadtown Powerhouse, a
28 by 44 foot reinforced concrete
building, with one turbine-generator
unit and a normal operating capacity of
1.5 MW; (17) a 1500-foot long 12 kv
tapline connecting Toadtown
Powerhouse to a distribution system;
and (18) appurtenant facilities.
The DeSabla development, which
diverts water from upper Butte Creek
and uses the outflow of the Toadtown
development, consists of the following
constructed facilities: (1) The 2.4-mile
long Toadtown Canal, an earthen canal
with a capacity of 125 cfs; (2) Butte
Creek Diversion Dam, a 50-foot high,
100-foot long, concrete arch dam with
an overflow spillway; (3) a 11.4-mile
long Butte Canal, composed of earthen
berm sections, gunited sections, tunnel
sections, a siphon, and flume sections,
with a capacity of 91 cfs; (4) a 0.7-mile
long canal that combines Butte Canal
with Toadtown Canal, with a capacity of
191 cfs; (5) feeder diversions from 4
creeks that flow into Butte Canal (1 not
in use); (6) DeSabla Dam, a 50-foot high,
100-foot wide earthen embankment with
a spillway canal; (7) DeSabla Forebay, a
15 acre reservoir with a gross storage
capacity of 163 acre-feet (originally 188
acre-feet); (8) a 66-inch diameter,
reduced to 42-inch diameter, 1.3-mile
long steel penstock; and (9) DeSabla
Powerhouse, a 26.5 by 41 foot
reinforced concrete building, with one
turbine generator unit and a normal
operating capacity of 18.5 MW; (10) a
0.25-mile long transmission tapline
connecting DeSabla Powerhouse to the
60kV Oro Fino Tap Line; and (11)
appurtenant facilities.
The Centerville development, which
diverts the flow of Butte Creek
downstream of the DeSabla
development, consists of the following
constructed facilities: (1) The Upper
Centerville Canal, that originates at
DeSabla Powerhouse and ends at
Helltown Ravine (currently carries a few
cfs for local water uses and has not been
used for power generation for many
years); (2) Lower Centerville Diversion
Dam, a 12-foot high, 72.5 foot-wide
concrete arch dam with an overflow
spillway; (3) an 8-mile long Lower
Centerville Canal, composed of earthen
canal and several flume sections, with a
capacity of 183 cfs; (4) feeder diversions
from 3 creeks that flow into Lower
Centerville Canal (all 3 no longer in
use); (5) one 30-inch diameter and one
42-inch diameter, reduced to 36-inch
diameter, 2,559-foot long steel
penstocks; (6) Centerville Forebay, a 27
by 37 foot concrete header box with a
spillway channel; (7) Centerville
Powerhouse, a 32 by 109 foot reinforced
concrete building, with two turbinegenerator units and a total normal
operating capacity of 6.4 MW; and (8)
appurtenant facilities.
PG&E operates the project primarily
as a run-of-river system and operates on
a continuous basis, using the water
supply available after satisfaction of the
minimum instream flow requirements.
During the winter and spring, base flows
in the West Branch of the Feather River
and Butte Creek typically provide
adequate flow for full operation of the
Project powerhouses. During the
summer months, the available base flow
water is augmented by water releases
from Round Valley and Philbrook
reservoirs. During the fall months,
Project powerhouses are operated at
reduced capacities due to low stream
flows.
Water releases from Round Valley
reservoir flow down the West Branch
Feather River, and water releases from
Philbrook reservoir pass down natural
58659
channels of Philbrook Creek and the
West Branch Feather River about 8
miles to Hendricks Head dam. Then
water is conveyed in the Hendricks
canal, through Toadtown Powerhouse,
then into the Toadtown canal. From this
point, the water is conveyed in the Butte
Creek canal to DeSabla Forebay then
discharged into Butte Creek. Water flow
is then diverted into the Lower
Centerville canal to the Centerville
header box, through the Centerville
Powerhouse, and finally discharged to
Butte Creek.
PG&E proposes to continue operating
the Project with no change to Project
generation facilities or features other
than adoption of resource management
measures and the deletion of five feeder
diversions.
l. Locations of the Application: A
copy of the application is available for
review at the Commission in the Public
Reference Room or may be viewed on
the Commission’s Web site at https://
www.ferc.gov using the ‘‘eLibrary’’ link.
Enter the docket number excluding the
last three digits in the docket number
field to access the document. For
assistance, contact FERC Online
Support at
FERCOnlineSupport@ferc.gov or tollfree at 1–866–208–3676, or for TTY,
(202) 502–8659. A copy is also available
for inspection and reproduction at the
address in item (h) above.
m. You may also register online at
https://www.ferc.gov/esubscribenow.htm
to be notified via e-mail of new filings
and issuances related to this or other
pending projects. For assistance, contact
FERC Online Support.
n. Procedural Schedule: The
application will be processed according
to the following Hydro Licensing
Schedule. Revisions to the schedule
may be made as appropriate.
Target date
Tendering Notice ........................................................................................................................................................................
Remaining Study Results Due ...................................................................................................................................................
Notice of Acceptance / Notice of Ready for Environmental Analysis .......................................................................................
Filing of recommendations, preliminary terms and conditions, and fishway prescriptions .......................................................
Commission issues Draft EA .....................................................................................................................................................
Comments on Draft EA ..............................................................................................................................................................
Modified terms and conditions ...................................................................................................................................................
Commission issues Final EA .....................................................................................................................................................
mmaher on PROD1PC70 with NOTICES
Milestone
October 9, 2007.
February 15, 2008.
March 17, 2008.
May 16, 2008.
November 12, 2008.
December 12, 2008.
February 10, 2009.
May 11, 2009.
VerDate Aug<31>2005
04:12 Oct 16, 2007
Jkt 214001
PO 00000
Frm 00029
Fmt 4703
Sfmt 4703
E:\FR\FM\16OCN1.SGM
16OCN1
58660
Federal Register / Vol. 72, No. 199 / Tuesday, October 16, 2007 / Notices
o. Final amendments to the
application must be filed with the
Commission no later than 30 days from
the issuance date of the notice of ready
for environmental analysis.
Kimberly D. Bose,
Secretary.
[FR Doc. E7–20318 Filed 10–15–07; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
Notice of Technical Conference and
Extension of Comment Date
mmaher on PROD1PC70 with NOTICES
October 9, 2007.
Direct Energy Services, LLC, Docket
No. RC07–4–000.
Sempra Energy Solutions LLC, Docket
No. RC07–6–000.
Strategic Energy, L.L.C., Docket No.
RC07–7–000.
Take notice that on October 12, 2007,
a technical conference will be held at
the Federal Energy Regulatory
Commission to discuss appeals of the
North American Electric Reliability
Corporation’s (NERC) compliance
registry determinations regarding Direct
Energy Services, LLC (Direct), Sempra
Energy Solutions LLC (Sempra) and
Strategic Energy, L.L.C. (Strategic). This
technical conference was established in
an Order Establishing Technical
Conference in the above dockets, issued
September 26, 2007.1 It will be held at
the headquarters of the Federal Energy
Regulatory Commission, 888 First
Street, NE., Washington, DC from 11
a.m.–2 p.m. (EST).
The technical conference will consist
of a discussion between Commission
staff and representatives of NERC and
ReliabilityFirst Corporation
(ReliabilityFirst). Direct, Sempra and
Strategic are also invited to participate.
The primary question to be addressed is
whether NERC has adequately justified
its determination that ReliabilityFirst
properly registered Direct, Sempra and
Strategic as load-serving entities (LSEs).
NERC and ReliabilityFirst will be
asked to address issues concerning the
decision to register Direct, Sempra and
Strategic, including but not limited to:
the nature and extent of any gap in
reliability that may result from their not
being registered as an LSE; the
circumstances within the
ReliabilityFirst region that justify their
registration as LSEs, while other
Regional Entities have registered retail
1 Direct
Energy Services, LLC, et al., 120 FERC
¶ 61,280 (2007).
VerDate Aug<31>2005
04:12 Oct 16, 2007
Jkt 214001
power marketers only as purchasingselling entities; the identification of the
Reliability Standard requirements that
would apply to a retail power marketer
registered as an LSE; support for the
conclusions (i) that the loads served by
Direct, Sempra and Strategic are directly
connected to the Bulk-Power System
and (ii) that retail power marketers
within the ReliabilityFirst region, in the
aggregate, impact Bulk-Power System
reliability; and alternative solutions for
addressing any reliability gaps that may
be identified.
The conference is open for the public
to attend. The conference will not be
transcribed and telephone participation
will not be available.
The Commission will accept written
comments on the discussion at this
technical conference no later than 5
p.m. Eastern Time on October 29, 2007.
Further, in notices of filing issued
September 17, 2007, in the abovecaptioned dockets, the Commission set
an October 11, 2007 comment date for
the submission of interventions,
comments and protests. The
Commission is extending the comment
date for the submission of interventions,
comments and protests in the abovecaptioned dockets until October 29,
2007, to coincide with the comment due
date for comments on the discussion at
the technical conference.
Commission conferences are
accessible under section 508 of the
Rehabilitation Act of 1973. For
accessibility accommodations please
send an e-mail to accessibility@ferc.gov
or call toll free 1–866–208–3372 (voice)
or 202–208–1659 (TTY), or send a FAX
to 202–208–2106 with the required
accommodations.
For more information about this
conference, please contact: Sarah
McKinley, Office of External Affairs,
Federal Energy Regulatory Commission,
(202) 502–8004,
sarah.mckinley@ferc.gov.
Kimberly D. Bose,
Secretary.
[FR Doc. E7–20316 Filed 10–15–07; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
Docket No. AD07–13–000
Conference on Enforcement Policy;
Second Notice of Conference
October 4, 2007.
As announced in the ‘‘First Notice of
Conference on Enforcement,’’ issued on
PO 00000
Frm 00030
Fmt 4703
Sfmt 4703
July 11, 2007, the Federal Energy
Regulatory Commission (Commission)
will hold a conference on November 16,
2007, to examine the implementation of
its enforcement authority as expanded
by the Energy Policy Act of 2005 (EPAct
2005).1 The conference will be held in
the Commission Meeting Room at the
Commission’s headquarters located at
888 First Street, NE., Washington, DC
20426.
The purpose of the conference is to
assess the enforcement program
implemented by the Commission during
the first two years after passage of EPAct
2005 primarily as it pertains to the
additional subject matter authority and
the expanded civil penalty authority in
Part II of the Federal Power Act 2 and
the Natural Gas Act.3
The tentative schedule and topics for
the conference are as follows:
9 a.m.–9:30 a.m.—Opening Remarks
9:30 a.m.–11 a.m.—First Panel—The
First Two Years of EPAct Enforcement
11 a.m.–11:10 a.m.—Break
11:10 a.m.–12:30 p.m.—Second Panel—
How Enforcement Fits into the
Commission’s Mission
12:30 p.m.–1:30 p.m.—Lunch break
1:30 p.m.–3 p.m.—Third Panel—
Enforcement of Reliability Standards
3 p.m.–3:15 p.m.—Closing Remarks
The first panel will focus on an
overview of enforcement from a broad
policy perspective, including how the
Commission balances a firm approach to
enforcement of its major rules,
regulations, and orders with fair
treatment of all persons that may be
subject to remedies and sanctions for
their conduct. The discussion will
examine how the Commission can best
achieve compliance with regulatory
requirements, and will address how the
Commission evaluates enforcement
cases, including self-reported violations
and matters that result in no penalty,
and how companies subject to
investigation can best respond to the
Commission.
The second panel will focus on how
entities relate to the Commission in
light of the newly enhanced EPAct 2005
enforcement authority and the
Commission’s ongoing regulatory
functions. The discussion will examine
when companies should direct inquiries
or problems to the Office of
Enforcement and when they should be
directed to other Commission program
offices. The Commission is interested in
how well the Commission responds to
matters that involve regulatory policy as
well as having enforcement aspects. In
1 Pub.
L. 109–58, 119 Stat. 594 (2005).
U.S.C.§ §791a et seq. (2000).
3 15 U.S.C.§ §717 et seq. (2000).
2 16
E:\FR\FM\16OCN1.SGM
16OCN1
Agencies
[Federal Register Volume 72, Number 199 (Tuesday, October 16, 2007)]
[Notices]
[Pages 58658-58660]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-20318]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
Federal Energy Regulatory Commission
Project No: P-803-087
Pacific Gas and Electric Company; Notice of Application Tendered
for Filing with the Commission and Establishing Procedural Schedule for
Licensing and Deadline for Submission of Final Amendments
October 9, 2007.
Take notice that the following hydroelectric application has been
filed with the Commission and is available for public inspection.
a. Type of Application: New Major License.
b. Project No.: P-803-087.
c. Date Filed: October 2, 2007.
d. Applicant: Pacific Gas and Electric Company (PG&E).
e. Name of Project: DeSabla-Centerville Hydroelectric Project.
f. Location: The existing project is located on Butte Creek and the
West Branch Feather River in Butte County, California. The project
affects 145.7 acres of federal lands administered by the Lassen
National Forest, 2.1 acres of federal lands administered by the Plumas
National Forest, and 11.6 acres of federal lands administered by the
U.S. Bureau of Land Management.
g. Filed Pursuant to: Federal Power Act 16 U.S.C. 791(a)-825(r).
h. Applicant Contact: Randal S. Livingston, Vice President-Power
Generation, Pacific Gas and Electric Company, P.O. Box 770000, Mail
Code: N11E, San Francisco, CA 94177; Telephone (415) 973-7000.
i. FERC Contact: Aaron Liberty, (202) 502-6862 or
aaron.liberty@ferc.gov.
j. This application is not ready for environmental analysis at this
time.
k. Project Description: The existing DeSabla-Centerville
Hydroelectric Project is composed of three developments, including
Toadtown, DeSabla, and Centerville, and has a combined installed
capacity of 26,400 kilowatts (kW).
The Toadtown development, which diverts water from the West Branch
Feather River, consists of the following constructed facilities: (1)
Round Valley Reservoir, a 98 acre reservoir with a gross storage
capacity of 1,700 acre-feet; (2) Round Valley dam, an earthfill dam,
29-feet high and 810-feet long; (3) a 40-foot wide overflow spillway;
(4) a 15-inch outlet pipe at the base of Round Valley dam, and manual
low level outlet valve; (5) Philbrook Reservoir, a 173 acre reservoir
with a gross storage capacity of 4,985 acre-feet; (6) Philbrook main
dam (located on Philbrook Creek), a compacted earthfill dam, 87-feet
high and 850-feet long; (7) Philbrook auxiliary dam (170 feet to the
right of the main dam), a compacted earthfill dam, 24-feet high and
470-feet long; (8) a 29.7-foot wide spillway with 5 flashboard bays;
(9) a 10.75-foot long and 14.75-foot wide spillway with a single,
manual radial gate; (10) a 33-inch diameter, 460-foot long outlet
conduit from Philbrook Reservoir; (11) a 17-foot high, 8-feet diameter
submerged vertical concrete intake, controlled by a 30-inch diameter
manual needle valve; (12) Hendricks Head Dam, a concrete gravity
[[Page 58659]]
dam, 15-feet high with an overflow spillway section 98-feet wide; (13)
a 8.66-mile long Hendricks Canal, composed mostly of earthen ditch with
several flume and tunnel sections, with a capacity of 125 cfs; (14)
feeder diversions from 4 creeks into Hendricks/Toadtown canal; (15) a
40-inch diameter, 1,556-foot long steel penstock; (16) Toadtown
Powerhouse, a 28 by 44 foot reinforced concrete building, with one
turbine-generator unit and a normal operating capacity of 1.5 MW; (17)
a 1500-foot long 12 kv tapline connecting Toadtown Powerhouse to a
distribution system; and (18) appurtenant facilities.
The DeSabla development, which diverts water from upper Butte Creek
and uses the outflow of the Toadtown development, consists of the
following constructed facilities: (1) The 2.4-mile long Toadtown Canal,
an earthen canal with a capacity of 125 cfs; (2) Butte Creek Diversion
Dam, a 50-foot high, 100-foot long, concrete arch dam with an overflow
spillway; (3) a 11.4-mile long Butte Canal, composed of earthen berm
sections, gunited sections, tunnel sections, a siphon, and flume
sections, with a capacity of 91 cfs; (4) a 0.7-mile long canal that
combines Butte Canal with Toadtown Canal, with a capacity of 191 cfs;
(5) feeder diversions from 4 creeks that flow into Butte Canal (1 not
in use); (6) DeSabla Dam, a 50-foot high, 100-foot wide earthen
embankment with a spillway canal; (7) DeSabla Forebay, a 15 acre
reservoir with a gross storage capacity of 163 acre-feet (originally
188 acre-feet); (8) a 66-inch diameter, reduced to 42-inch diameter,
1.3-mile long steel penstock; and (9) DeSabla Powerhouse, a 26.5 by 41
foot reinforced concrete building, with one turbine generator unit and
a normal operating capacity of 18.5 MW; (10) a 0.25-mile long
transmission tapline connecting DeSabla Powerhouse to the 60kV Oro Fino
Tap Line; and (11) appurtenant facilities.
The Centerville development, which diverts the flow of Butte Creek
downstream of the DeSabla development, consists of the following
constructed facilities: (1) The Upper Centerville Canal, that
originates at DeSabla Powerhouse and ends at Helltown Ravine (currently
carries a few cfs for local water uses and has not been used for power
generation for many years); (2) Lower Centerville Diversion Dam, a 12-
foot high, 72.5 foot-wide concrete arch dam with an overflow spillway;
(3) an 8-mile long Lower Centerville Canal, composed of earthen canal
and several flume sections, with a capacity of 183 cfs; (4) feeder
diversions from 3 creeks that flow into Lower Centerville Canal (all 3
no longer in use); (5) one 30-inch diameter and one 42-inch diameter,
reduced to 36-inch diameter, 2,559-foot long steel penstocks; (6)
Centerville Forebay, a 27 by 37 foot concrete header box with a
spillway channel; (7) Centerville Powerhouse, a 32 by 109 foot
reinforced concrete building, with two turbine-generator units and a
total normal operating capacity of 6.4 MW; and (8) appurtenant
facilities.
PG&E operates the project primarily as a run-of-river system and
operates on a continuous basis, using the water supply available after
satisfaction of the minimum instream flow requirements. During the
winter and spring, base flows in the West Branch of the Feather River
and Butte Creek typically provide adequate flow for full operation of
the Project powerhouses. During the summer months, the available base
flow water is augmented by water releases from Round Valley and
Philbrook reservoirs. During the fall months, Project powerhouses are
operated at reduced capacities due to low stream flows.
Water releases from Round Valley reservoir flow down the West
Branch Feather River, and water releases from Philbrook reservoir pass
down natural channels of Philbrook Creek and the West Branch Feather
River about 8 miles to Hendricks Head dam. Then water is conveyed in
the Hendricks canal, through Toadtown Powerhouse, then into the
Toadtown canal. From this point, the water is conveyed in the Butte
Creek canal to DeSabla Forebay then discharged into Butte Creek. Water
flow is then diverted into the Lower Centerville canal to the
Centerville header box, through the Centerville Powerhouse, and finally
discharged to Butte Creek.
PG&E proposes to continue operating the Project with no change to
Project generation facilities or features other than adoption of
resource management measures and the deletion of five feeder
diversions.
l. Locations of the Application: A copy of the application is
available for review at the Commission in the Public Reference Room or
may be viewed on the Commission's Web site at https://www.ferc.gov using
the ``eLibrary'' link. Enter the docket number excluding the last three
digits in the docket number field to access the document. For
assistance, contact FERC Online Support at FERCOnlineSupport@ferc.gov
or toll-free at 1-866-208-3676, or for TTY, (202) 502-8659. A copy is
also available for inspection and reproduction at the address in item
(h) above.
m. You may also register online at https://www.ferc.gov/
esubscribenow.htm to be notified via e-mail of new filings and
issuances related to this or other pending projects. For assistance,
contact FERC Online Support.
n. Procedural Schedule: The application will be processed according
to the following Hydro Licensing Schedule. Revisions to the schedule
may be made as appropriate.
------------------------------------------------------------------------
Milestone Target date
------------------------------------------------------------------------
Tendering Notice..................... October 9, 2007.
Remaining Study Results Due.......... February 15, 2008.
Notice of Acceptance / Notice of March 17, 2008.
Ready for Environmental Analysis.
Filing of recommendations, May 16, 2008.
preliminary terms and conditions,
and fishway prescriptions.
Commission issues Draft EA........... November 12, 2008.
Comments on Draft EA................. December 12, 2008.
Modified terms and conditions........ February 10, 2009.
Commission issues Final EA........... May 11, 2009.
------------------------------------------------------------------------
[[Page 58660]]
o. Final amendments to the application must be filed with the
Commission no later than 30 days from the issuance date of the notice
of ready for environmental analysis.
Kimberly D. Bose,
Secretary.
[FR Doc. E7-20318 Filed 10-15-07; 8:45 am]
BILLING CODE 6717-01-P