Certain New Chemicals; Receipt and Status Information, 56347-56352 [E7-19543]
Download as PDF
<![CDATA[
Federal Register / Vol. 72, No. 191 / Wednesday, October 3, 2007 / Notices
B. Tips for Preparing Your Comments.
When submitting comments, remember
to:
• Identify the subject by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
• Follow directions—The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
• Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
• Describe any assumptions and
provide any technical information and/
or data that you used.
• If you estimate potential costs or
burdens, explain how you arrived at
your estimate in sufficient detail for it
to be reproduced.
• Provide specific examples to
illustrate your concerns, and suggest
alternatives.
• Explain your views as clearly as
possible, avoiding the use of profanity
and personal threats.
• Make sure to submit your
comments by the comment period
deadline identified.
Dated: September 27, 2007.
Susan E. Bromm,
Director, Office of Site Remediation
Enforcement.
James E. Woolford,
Director, Office of Superfund Remediation
and Technology Innovation.
[FR Doc. E7–19512 Filed 10–2–07; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2007–0984; FRL–8151–7]
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
rwilkins on PROD1PC63 with NOTICES
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
VerDate Aug<31>2005
18:31 Oct 02, 2007
Jkt 211001
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from August 3, 2007
to September 7, 2007, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before November
2, 2007.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2007–0984, by
one of the following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
number EPA–HQ–OPPT–2007–0984.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2007–0984. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
PO 00000
Frm 00017
Fmt 4703
Sfmt 4703
56347
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket’s index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
web site to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC PublicReading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone
numberof the EPA/DC Public Reading
Room is (202) 566–1744, and the
telephone number for the OPPT Docket
is (202) 566–0280. Docket visitors are
required to show photographic
identification, pass through a metal
detector, and sign the EPA visitor log.
All visitor bags are processed through
an X-ray machine and subject to search.
Visitors will be provided an EPA/DC
badge that must be visible at all times
in the building and returned upon
departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
E:\FR\FM\03OCN1.SGM
03OCN1
56348
Federal Register / Vol. 72, No. 191 / Wednesday, October 3, 2007 / Notices
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions - The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from August 3, 2007
to September 7, 2007, consists of the
PMNs and TMEs, both pending or
expired, and the notices of
commencement to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. Receipt and Status Report for PMNs
and TMEs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 74 PREMANUFACTURE NOTICES RECEIVED FROM: 08/03/07 TO 09/07/07
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
08/03/07
08/03/07
10/31/07
10/31/07
CBI
CBI
(S) Chemical intermediate
(G) A component of adhesives
P–07–0604
08/03/07
10/31/07
CIBA Specialty Chemicals Corporation
(S) Ultra violet curing agent in surface
modifier (for plastics)
P–07–0607
08/07/07
11/04/07
Hybrid Plastics, Inc.
(S) Flame retardant for thermoplastic
resins
P–07–0608
rwilkins on PROD1PC63 with NOTICES
P–07–0602
P–07–0603
08/07/07
11/04/07
CBI
P–07–0609
P–07–0610
P–07–0611
P–07–0612
P–07–0613
P–07–0614
P–07–0615
08/08/07
08/08/07
08/08/07
08/08/07
08/08/07
08/09/07
08/09/07
11/05/07
11/05/07
11/05/07
11/05/07
11/05/07
11/06/07
11/06/07
CBI
CBI
CBI
CBI
CBI
CBI
CBI
(G) Component of industrial use coating
(G) Additive for lubricants
(G) Sealant
(G) Sealant
(G) Sealant
(G) Sealant
(G) Surface treatment for pigments
(G) Component of foam
P–07–0616
08/09/07
11/06/07
CBI
(G) Component of foam
VerDate Aug<31>2005
18:31 Oct 02, 2007
Jkt 211001
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
E:\FR\FM\03OCN1.SGM
Chemical
(G) 1-alkene, 10,10-diethoxy(G) Reaction product of 2-propenoic
acid, 2-methyl-, monoester and a
proprietary isocyanate
(G) Poly(oxy-1,2-alkyl),.alpha.-hydro.omega.-hydroxy-,.alpha.oxoarylacetate
(S) 1,2-ethanediamine, N1-[3[3,5,7,9,11,13,15-heptakis
2methylpropyl),pentacyclo
[9.5.1.13,9,15,15.17,13]octasiloxan1-yl]propyl](G) Aliphatic polyurethane acrylate
(G) Sulfurized fatty acid derivative
(G) Bisurea compound
(G) Bisurea compound
(G) Bisurea compound
(G) Bisurea compound
(G) 2-arylazo-N-aryl-3-oxo-alkylamide
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
03OCN1
56349
Federal Register / Vol. 72, No. 191 / Wednesday, October 3, 2007 / Notices
I. 74 PREMANUFACTURE NOTICES RECEIVED FROM: 08/03/07 TO 09/07/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
08/10/07
08/10/07
08/10/07
08/10/07
08/10/07
08/10/07
08/13/07
08/14/07
08/14/07
11/07/07
11/07/07
11/07/07
11/07/07
11/07/07
11/07/07
11/10/07
11/11/07
11/11/07
3M Company
3M Company
CBI
CBI
CBI
CBI
CBI
CBI
CBI
(G) Heat transfer fluid
(G) Chemical intermediate
(G) Lubricant additive
(G) Lubricant additive
(G) Lubricant additive
(G) Lubricant additive
(G) Filler dispersant
(S) Anti-stain in construction
(G) Additive for inks and cleaners
P–07–0626
08/14/07
11/11/07
CBI
(G) Toner additive
P–07–0627
08/14/07
11/11/07
CBI
P–07–0628
P–07–0629
P–07–0630
08/14/07
08/14/07
08/15/07
11/11/07
11/11/07
11/12/07
CBI
Croda Inc.
CBI
P–07–0631
08/15/07
11/12/07
CBI
P–07–0632
08/15/07
11/12/07
CBI
P–07–0633
08/15/07
11/12/07
08/15/07
11/12/07
P–07–0635
08/16/07
11/13/07
Angus Chemical Company, a subsidiary
of the Dow Chemical Company
Angus chemical Company, a subsidiary
of the Dow Chemical Company
CBI
(S) Acrylic polymer used in the manufacture of adhesive tapes
(G) Non-dispersive use
(G) Polymer additive
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(S) Intermediate chemical
P–07–0634
P–07–0636
08/17/07
11/14/07
CBI
(G) Chemical intermediate / catalyst
P–07–0637
08/17/07
11/14/07
CBI
(G) Chemical intermediate / catalyst
P–07–0638
08/16/07
11/13/07
Chemtek, Inc.
(S) Concrete cleaner component
P–07–0639
P–07–0640
08/20/07
08/20/07
11/17/07
11/17/07
CBI
Forbo Adhesives, LLC
(S) Gas hydration inhibitor
(G) Hot melt polyurethane adhesive
P–07–0641
P–07–0642
08/21/07
08/17/07
11/18/07
11/14/07
Spectra Colors Corp.
CBI
P–07–0643
08/22/07
11/19/07
DIC International
(USA), LLC.
(G) Dye for washable ink systems
(G) Cleaning and polishing chemical
for semiconductor manufacturing
(G) Acrylic resin for coatings
P–07–0644
08/16/07
11/13/07
Chemtek, Inc.
(S) Concrete cleaner component
P–07–0645
08/22/07
11/19/07
DIC International
(USA), LLC.
(G) Acrylic resin for coatings
P–07–0646
P–07–0647
P–07–0648
08/23/07
08/23/07
08/22/07
11/20/07
11/20/07
11/19/07
Firmenich Inc.
Firmenich Inc
Incorez Corporation
P–07–0649
P–07–0650
rwilkins on PROD1PC63 with NOTICES
P–07–0617
P–07–0618
P–07–0619
P–07–0620
P–07–0621
P–07–0622
P–07–0623
P–07–0624
P–07–0625
08/22/07
08/24/07
11/19/07
11/21/07
CBI
CBI
(G) Chemical intermediate
(G) Chemical intermediate
(S) Amine hardener used in the formulation of epoxy based paints and
coatings
(G) Coating (surface treatment)
(G) Paper product additive
P–07–0651
08/24/07
11/21/07
CBI
P–07–0652
08/24/07
11/21/07
Bio-based Technologies, LLC
VerDate Aug<31>2005
18:31 Oct 02, 2007
Jkt 211001
PO 00000
Frm 00019
Chemical
(G) Hydrofluoroether
(G) Alkyl acid fluoride
(G) Alkanoldioic acid, dialkyl ester
(G) Alkanoldioic acid, dialkyl ester
(G) Alkanoldioic acid, dialkyl ester
(G) Alkanoldioic acid, dialkyl ester
(G) Polyalkoxylate phosphite ester
(G) Amino functional silsesquioxanes
(G) Cyclic amine polymer with
epoxides, alkylcarboxy derivs.
(G) Methyl trialkyl ammonium chloride, reaction products with silicic
acid, lithium, magnesium and sodium salt
(G) Acrylic polymer
(G) Blocked aromatic isocyanate
(G) Polyethylene glycol dierucate
(G) Polyester polyether urethane
block copolymer
(G) Polyester polyether urethane
block copolymer
(G) Polyester polyether urethane
block copolymer
(G) Nitroalcohol derivative
(S) Metal working fluid additive
(G) Alkanolamine derivative
(G) Coating component
(G) Styrene, polymer with methacrylate ester, alkene, and substituted
trialkoxysilane
(G) Aluminum mixed metal and diol
complex
(G) Aluminum mixed metal and mixed
diol complex
(G) Alkylphosphonic acid mixture, lithium salt
(G) Ether carboxylic acid amide
(G) Isocyanate functional polyester
polyether urethane polymer
(G) Ethoxylated triphenylmethane
(G) Polystyrene derivative
(G) Crosslinker for polyacrylamides;
additive for resins
(G) Plastics
Fmt 4703
Sfmt 4703
E:\FR\FM\03OCN1.SGM
(G) Hydroxyalkyl methacrylate, polymer with branched benzene, alkyl
alkenoate and alkyl fumarate
(G) Alcohol, ethoxylated, phosphated,
lithium salt
(G) Hydroxyalkyl methacrylate, polymer with branched benzene, alkyl
(c=1-6) methacrylate, alkyl acrylate
and alkenoic acid
(S) Dodecane, 1,1,3-triethoxy(S) Decane, 1,1-diethoxy(G) Polyamnine hardner
(G) Urethane resin
(G) Glyoxalated acrylamide, dadmac,
2-hydroxyethylacrylate ternary copolymer with amine-amide adduct
(G) Amine-amide adduct
(S) Soybean oil, reaction products
with
diethanolamine
and
ethaneperoxoic acid
03OCN1
56350
Federal Register / Vol. 72, No. 191 / Wednesday, October 3, 2007 / Notices
I. 74 PREMANUFACTURE NOTICES RECEIVED FROM: 08/03/07 TO 09/07/07—Continued
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Ethoxylated methylphosphonic
acid
(G) Maleinated Acrylated epoxided
Soy oil
(G) Waterborne polyurethane
(G) Substituted triazine derivative
(G) Substituted benzimidazol sulfonic
acid
(S) Amine bis(C11–14 branched and
linear alkyl), tungstates
(G) Substituted triazine derivative
(G) Substituted anthraquinone derivative
(G) Substituted phthalocyanine
(G) Substituted alkenyl-terminated
siloxanes and silicones polymers
with substituted acrylates, peroxide
initiated
(G) Poly(ethylene oxide)
(G) Poly(ethylene oxide)
(G) Poly(ethylene oxide)
(G) Poly(ethylene oxide)
(G) Poly(ethylene oxide)
(G) Poly(ethylene oxide)
(G) Butanoic acid, (1R)-1-ethenylalkyl
ester
(G) Polyurethane adhesive
(G) Polyethylene glycol ether acid
(S)
2(3H)-furanone,5-(6heptenyl)dihydro(G) Oxirane, substituted siliylmethyl-,
hydrolysis products with alkanol zirconium(4+) salt and silica, acetates
(G) Phenolic amine
(G) Phenolic amine
(G)
Aspartic
acid,
N-alkyl,N(isocyanatoalkyl)-,alkyl ester
(G)
substituted
Benzenemethanaminium chloride/
acrylamide/acrylic acid/substituted
ethanaminium chloride polymer
P–07–0653
08/24/07
11/21/07
CBI
P–07–0654
08/07/07
11/04/07
Cara Plastics Inc
(S) Flame retardant for plastics (eg.
polyurethane)
(S) Composite resins crosslinker
P–07–0655
P–07–0656
P–07–0657
08/22/07
08/28/07
08/28/07
11/19/07
11/25/07
11/25/07
CBI
CBI
CBI
(S) Binder for in-mold coatings
(G) Dyestuff
(G) Dyestuff
P–07–0658
08/29/07
11/26/07
P–07–0659
P–07–0660
08/29/07
08/29/07
11/26/07
11/26/07
R. T. Vanderbilt Company, Inc.
CBI
CBI
(S) Anti-wear and anti-oxidant agent
for lubricants
(G) Dyestuff
(G) Dyestuff
P–07–0661
P–07–0662
08/29/07
08/29/07
11/26/07
11/26/07
CBI
Cytec Industries Inc.
(G) Dyestuff
(S) Flow-leveling additive for industrial
coatings
P–07–0664
P–07–0665
P–07–0666
P–07–0667
P–07–0668
P–07–0669
P–07–0670
09/04/07
09/04/07
09/04/07
09/04/07
09/04/07
09/04/07
09/04/07
12/02/07
12/02/07
12/02/07
12/02/07
12/02/07
12/02/07
12/02/07
CBI
CBI
CBI
CBI
CBI
CBI
CBI
(G) Textile additive and foam
(G) Textile additive and foam
(G) Textile additive and foam
(G) Textile additive and foam
(G) Textile additive and foam
(G) Textile additive and foam
(S) Chemical intermediate
P–07–0671
P–07–0672
P–07–0673
09/04/07
09/05/07
09/05/07
12/02/07
12/03/07
12/03/07
CBI
CBI
Mane, USA
(G) Lamination adhesive
(G) Metal working fluid
(G) Perfumery ingredient
P–07–0674
09/07/07
12/05/07
CBI
(G) Protective coating
P–07–0675
P–07–0676
P–07–0677
09/06/07
09/06/07
09/07/07
12/04/07
12/04/07
12/05/07
(G) Destructive use (antioxidant)
(G) Destructive use (antioxidant)
(S) Chemical intermediate
P–07–0678
09/06/07
12/04/07
CBI
CBI
Itw Devcon Futura
Coatings
CIBA Specialty Chemicals Corporation
In Table II of this unit, EPA provides
the following information (to the extent
additive
additive
additive
additive
additive
additive
(G) Paper additive
that such information is not claimed as
CBI) on the TMEs received:
II. 4 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 8/03/07 TO 09/07/07
Case No.
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
08/07/07
09/20/07
CBI
T–07–0021
08/17/07
09/30/07
Forbo Adhesives, LLC
T–07–0022
rwilkins on PROD1PC63 with NOTICES
T–07–0020
08/10/07
09/23/07
Shell lubricants
(S) Synthesis high melt paraffinwax
designed for numerous industrial
application
T–07–0023
08/30/07
10/13/07
Cytec Industries Inc.
(S) Flow-leveling additive for industrial
coatings
VerDate Aug<31>2005
18:31 Oct 02, 2007
Jkt 211001
PO 00000
Frm 00020
(G) Component of industrial use coating
(G) Hot melt polyurethane adhesive
Fmt 4703
Sfmt 4703
E:\FR\FM\03OCN1.SGM
Chemical
(G) Aliphatic polyurethane acrylate
(G) Isocyanate functional polyester
polyether urethane polymer
(S) Mixture of hydrocarbons (C20–
C110) containing straight and
branched chain alkanes produced
by synthesis from natural gas (fisher-tropsch)
(G) Substituted alkenyl-terminated
siloxanes and silicones polymers
with substituted acrylates, peroxide
initiated
03OCN1
Federal Register / Vol. 72, No. 191 / Wednesday, October 3, 2007 / Notices
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
56351
CBI) on the Notices of Commencement
to manufacture received:
III. 49 NOTICES OF COMMENCEMENT FROM: 8/03/07 TO 09/07/07
Case No.
Received Date
Commencement
Notice End Date
09/06/07
08/29/07
08/15/07
08/17/07
P–06–0166
P–06–0229
P–06–0334
P–06–0343
08/06/07
08/27/07
08/09/07
08/29/07
07/22/07
08/06/07
07/17/07
08/17/07
P–06–0438
08/07/07
07/21/07
P–06–0576
P–06–0608
08/06/07
08/29/07
07/12/07
08/06/07
P–06–0677
P–06–0690
P–06–0692
P–06–0752
P–06–0815
09/05/07
08/15/07
08/13/07
08/03/07
09/04/07
08/01/07
07/26/07
07/16/07
07/27/07
08/24/07
P–06–0816
08/16/07
07/18/07
P–06–0829
P–07–0009
P–07–0058
P–07–0087
P–07–0097
08/06/07
08/27/07
08/22/07
09/04/07
08/09/07
08/02/07
08/07/07
08/13/07
08/28/07
06/08/07
P–07–0220
P–07–0228
P–07–0253
P–07–0258
P–07–0261
P–07–0268
P–07–0283
P–07–0286
08/13/07
08/31/07
09/07/07
08/22/07
08/08/07
08/09/07
08/22/07
08/23/07
07/05/07
08/20/07
08/14/07
08/03/07
07/05/07
06/08/07
08/14/07
07/30/07
P–07–0287
08/17/07
08/01/07
P–07–0301
P–07–0329
P–07–0332
P–07–0335
P–07–0337
P–07–0349
P–07–0367
P–07–0369
08/16/07
09/07/07
08/29/07
08/03/07
08/16/07
08/30/07
08/08/07
08/21/07
07/30/07
08/16/07
08/10/07
07/27/07
08/01/07
08/23/07
07/20/07
07/30/07
P–07–0369
P–07–0370
P–07–0379
08/21/07
08/06/07
08/08/07
07/30/07
07/23/07
08/01/07
P–07–0393
P–07–0401
P–07–0412
08/06/07
08/17/07
08/23/07
07/28/07
08/01/07
08/04/07
P–07–0416
P–07–0429
rwilkins on PROD1PC63 with NOTICES
P–05–0321
P–06–0069
08/07/07
08/08/07
08/06/07
08/06/07
P–07–0437
09/04/07
08/26/07
P–07–0441
P–07–0443
09/04/07
09/05/07
08/27/07
08/30/07
VerDate Aug<31>2005
18:31 Oct 02, 2007
Jkt 211001
PO 00000
Chemical
(G) Mono-methyl maleate/acrylic acid/hydroxypropyl methacrylate copolymer
(G) Dialkyl carbocyclo-, reaction products with alkadiene, by-products from, distant residues
(S) 3h-1,2,4-triazol-3-one, 1,2-dihydro(G) Unsaturated aliphatic urethane acrylate
(G) Modified polyurethane
(G) Dialkyl carbocyclo-, reaction products with alkadiene, cyclized, dehydrogenated, isomerized, by-products from, distant residues
(G) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with polypropylene glycol diamine, amino acid and polyoxyalkylenepolyamine
(G) Fluoroalkylacrylate copolymer
(G) Alkyl acrylate, polymer with alkyl acrylates, styrene and hydroxyalkyl
acrylates, peroxide-initiated
(G) Ethylene interpolymer
(G) Diphenylmethane isocyanate polyester elastomer
(G) Derivatized hydroxylated triglycerides
(G) Modified imidazole
(S) 1,2-ethanediamine, N-[3-(trimethoxysilyl)propyl]-, hydrolysis products with
wollastonite (CA(SI03))
(G) Modified reaction products of alkyl alcohol, halogenated alkane, substituted
epoxide, and amino compound
(S) Fatty acids, canola-oil, me esters
(G) Aqueous polyurethane dispersion
(S) 3-hexene, 1-(2-butenyloxy)-, (3Z)(G) Partially fluorinated condensation polymer
(S) 2-propenoic acid, 2-methyl-, butyl ester, polymer with ethenylbenzene and
2-sulfoethyl 2-methyl-2-propenoate, ammonium salt
(G) Aliphatic polyester- polyether polyurethane resin
(G) Polyether modified polydimethylsiloxane
(G) Polyether-modified siloxane
(G) Acrylic acid polymer with vinylphosphonic acid and ethylene glycol acrylate
(G) Urethane acrylate resin
(G) Substituted benzoxazolium salt
(S) Thiophene, 2,5-dibromo-3-hexyl(G)
Phenol,
4,4′-(1-methylethylidene)bis[disubstituted-,
polymer
with
disubstituted phenol
(G)
Phenol,
4,4′-(1-methylethylidene)bis[disubstituted-,
polymer
with
disubstituted phenol, substituted propenoate
(G) Thioketone
(G) Derivative of 2,4-dihydroxy benzophenone
(G) Alkyloxy carboxylic acid
(G) Epoxy resin
(G) Polyester polyurethane
(G) Fluorinated alkylammonium salt
(G) Fluorinated zinc dialkyldithiophosphate
(S) Definition: Extractives and thier physically modified derivatives. Populus
Nigra
(S) Oils, poplar, Populus Nigra
(G) Glycol phosphite
(S)
Ethanol,
2,2′,2′′-nitrilotris-,
polymer
with
.alpha.-hydro-.omega.hydroxypoly(oxy-1,4-butanediyl)
and
1,1′-methylenebis[4isocyanatocyclohexane], 2-hydroxyethyl acrylate-blocked
(G) Isocyanate functional polyester urethane polymer
(S) 2-propenoic acid, 2-methyl, 2-hydroxyethyl ester, homopolymer
(G) 2-propenoic acid, 2- methyl-, polymer with 2-ethylhexyl 2-propenoate, methyl 2-methyl-2-propanoate, substituted-1-propanesulfonic acid and 2-methyl-2propenamide
(G) Aziridine homopolymer derivative
(G) Substituted propenoic acid polymer with substituted bisethanol and substituted cyclohexane
(G) Siloxanes and silicones, di-alkyl, chlorine-terminated, polymers with 2ethylhexyl acrylate-polyoxyalkylene glycol reaction products, polyoxyalkylene
glycol mono-alkyl ether-terminated
(G) Glycerides, alkyl
(G) Methacrylate copolymer with phosphinicobis methacrylate and 2(phosphonooxy) ethyl 2-methyl-2-propenoate, sodium salt, peroxydisulfuric
acid ([ho)s(o)2]2o2) diammonium salt-initiated
Frm 00021
Fmt 4703
Sfmt 4703
E:\FR\FM\03OCN1.SGM
03OCN1
56352
Federal Register / Vol. 72, No. 191 / Wednesday, October 3, 2007 / Notices
III. 49 NOTICES OF COMMENCEMENT FROM: 8/03/07 TO 09/07/07—Continued
Case No.
Commencement
Notice End Date
Received Date
P–07–0469
09/06/07
08/30/07
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: September 24, 2007.
Chandler M. Sirmons,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E7–19543 Filed 10–2–07; 8:45 am]
BILLING CODE 6560–50–S
FEDERAL MARITIME COMMISSION
Ocean Transportation Intermediary
License Revocations
rwilkins on PROD1PC63 with NOTICES
The Federal Maritime Commission
hereby gives notice that the following
Ocean Transportation Intermediary
licenses have been revoked pursuant to
section 19 of the Shipping Act of 1984
(46 U.S.C. Chapter 409) and the
regulations of the Commission
pertaining to the licensing of Ocean
Transportation Intermediaries, 46 CFR
part 515, effective on the corresponding
date shown below:
License Number: 016976NF.
Name: Ajinomoto Logistics Corp. dba
AB Logistics Co., Ltd.
Address: 3460 Torrance Blvd., #310.
Date Revoked: September 17, 2007.
Reason: Surrendered license
voluntarily.
License Number: 018741F.
Name: Bruzzone Shipping Miami,
LLC.
Address: 11421 NW 39th Street,
Miami, FL 33178.
Date Revoked: September 23, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 019709NF.
Name: Customs & Logistics
International Corp.
Address: 3054 NW 72nd Ave., Miami,
FL 33122.
Date Revoked: September 22, 2007.
Reason: Failed to maintain valid
bonds.
License Number: 018809N.
Name: El Al Moving Corp. dba Global
Express.
Chemical
(G) Magnesium hydroxide surface treated
Address: 200 Knuth Road, Ste. 214,
Boynton Beach, FL 33436.
Date Revoked: September 13, 2007.
Reason: Surrendered license
voluntarily.
License Number: 019884N.
Name: Embarque La Isla, Inc.
Address: 440 East 182nd Street,
Bronx, NY 10457.
Date Revoked: September 23, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 004156F.
Name: Gulf Eagle USA, Inc.
Address: 7476 New Ridge Road,
Hanover, MD 21076.
Date Revoked: September 16, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 016347N.
Name: Hana Worldwide Shipping Co.,
Inc.
Address: 533 Division Street,
Elizabeth, NJ 07201.
Date Revoked: September 16, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 003229F.
Name: Levion Services, Inc.
Address: 3333 N. San Gabriel Blvd.,
#G, Rosemead, CA 91770.
Date Revoked: September 21, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 018750N.
Name: MSL Global Logistics Inc.
Address: 160–19 Rockaway Blvd.,
Jamaica, NY 11434.
Date Revoked: September 3, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 003650F.
Name: Oceanic Freights, Inc.
Address: 5804 Sedgefield Drive,
Austin, TX 78746.
Date Revoked: September 5, 2007.
Reason: Surrendered license
voluntarily.
License Number: 015776NF.
Name: Olympic Freight, Inc.
Address: 5803 Skylane Blvd., Ste. A–
1, Windsor, CA 95492.
Date Revoked: September 6, 2007.
Reason: Failed to maintain valid
bonds.
License Number: 017825N.
Name: Pacific-Net Logistics, Inc.
Address: 1255 Corporate Center
Drive., Ste. PH–400, Monterey Park, CA
91754.
Date Revoked: July 8, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 018534N.
Name: Pacific-Net Logistics ATL, Inc.
Address: 6020 Dawson Blvd., Ste. F,
Norcross, GA 30093.
Date Revoked: August 12, 2007.
Reason: Failed to maintain a valid
bond.
License Number: 017709NF.
Name: Star Airfreight Co., Ltd.
Address: 149–35 177th Street, 21F,
Jamaica, NY 11434.
Date Revoked: September 4, 2007.
Reason: Surrendered license
voluntarily.
License Number: 017786NF.
Name: Star Airfreight Co., Ltd.
Address: 8901 S. La Cienega Blvd.,
Ste. 108, Inglewood, CA 90301.
Date Revoked: September 4, 2007.
Reason: Surrendered license
voluntarily.
Sandra L. Kusumoto,
Director, Bureau of Certification and
Licensing.
[FR Doc. E7–19561 Filed 10–2–07; 8:45 am]
BILLING CODE 6730–01–P
FEDERAL MARITIME COMMISSION
Ocean Transportation Intermediary
License Reissuance
Notice is hereby given that the
following Ocean Transportation
Intermediary license has been reissued
by the Federal Maritime Commission
pursuant to section 19 of the Shipping
Act of 1984 (46 U.S.C. Chapter 409) and
the regulations of the Commission
pertaining to the licensing of Ocean
Transportation Intermediaries, 46 CFR
part 515.
License No.
Name/address
020119F ......
Express Forwarding, Inc., 12738 N. Florida Avenue, Tampa, FL 33612 ..............................................................
VerDate Aug<31>2005
18:31 Oct 02, 2007
Jkt 211001
PO 00000
Frm 00022
Fmt 4703
Sfmt 4703
Date reissued
E:\FR\FM\03OCN1.SGM
03OCN1
April 19, 2007.
]]>Agencies
[Federal Register Volume 72, Number 191 (Wednesday, October 3, 2007)]
[Notices]
[Pages 56347-56352]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-19543]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2007-0984; FRL-8151-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from August 3, 2007 to September 7, 2007, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before November 2, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2007-0984, by one of the following methods.
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2007-0984. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2007-0984. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov your
e-mail address will be automatically captured and included as part of
the comment that is placed in the public docket and made available on
the Internet. If you submit an electronic comment, EPA recommends that
you include your name and other contact information in the body of your
comment and with any disk or CD ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket's
index available in regulations.gov. To access the electronic docket, go
to https://www.regulations.gov, select ``Advanced Search,'' then
``Docket Search.'' Insert the docket ID number where indicated and
select the ``Submit'' button. Follow the instructions on the
regulations.gov web site to view the docket index or access available
documents. Although listed in the index, some information is not
publicly available, e.g., Confidential Business Information (CBI) or
other information whose disclosure is restricted by statute. Certain
other material, such as copyrighted material, will be publicly
available only in hard copy. Publicly available docket materials are
available electronically at https://www.regulations.gov, or, if only
available in hard copy, at the OPPT Docket. The OPPT Docket is located
in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington, DC. The EPA/DC PublicReading Room
hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding Federal holidays. The telephone numberof the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. Docket visitors are required to show
photographic identification, pass through a metal detector, and sign
the EPA visitor log. All visitor bags are processed through an X-ray
machine and subject to search. Visitors will be provided an EPA/DC
badge that must be visible at all times in the building and returned
upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
[[Page 56348]]
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from August 3, 2007 to September 7,
2007, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 74 Premanufacture Notices Received From: 08/03/07 to 09/07/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-07-0602 08/03/07 10/31/07 CBI (S) Chemical (G) 1-alkene, 10,10-
intermediate diethoxy-
P-07-0603 08/03/07 10/31/07 CBI (G) A component of (G) Reaction product
adhesives of 2-propenoic acid,
2-methyl-, monoester
and a proprietary
isocyanate
P-07-0604 08/03/07 10/31/07 CIBA Specialty (S) Ultra violet (G) Poly(oxy-1,2-
Chemicals curing agent in alkyl),.alpha.-hydro-
Corporation surface modifier .omega.-hydroxy-
(for plastics) ,.alpha.-
oxoarylacetate
P-07-0607 08/07/07 11/04/07 Hybrid Plastics, Inc. (S) Flame retardant (S) 1,2-
for thermoplastic ethanediamine, N1-[3-
resins [3,5,7,9,11,13,15-
heptakis
2methylpropyl),penta
cyclo[9.5.1.13,9,15,
15.17,13]octasiloxan-
1-yl]propyl]-
P-07-0608 08/07/07 11/04/07 CBI (G) Component of (G) Aliphatic
industrial use polyurethane
coating acrylate
P-07-0609 08/08/07 11/05/07 CBI (G) Additive for (G) Sulfurized fatty
lubricants acid derivative
P-07-0610 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0611 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0612 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0613 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0614 08/09/07 11/06/07 CBI (G) Surface treatment (G) 2-arylazo-N-aryl-
for pigments 3-oxo-alkylamide
P-07-0615 08/09/07 11/06/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
P-07-0616 08/09/07 11/06/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
[[Page 56349]]
P-07-0617 08/10/07 11/07/07 3M Company (G) Heat transfer (G) Hydrofluoroether
fluid
P-07-0618 08/10/07 11/07/07 3M Company (G) Chemical (G) Alkyl acid
intermediate fluoride
P-07-0619 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0620 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0621 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0622 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0623 08/13/07 11/10/07 CBI (G) Filler dispersant (G) Polyalkoxylate
phosphite ester
P-07-0624 08/14/07 11/11/07 CBI (S) Anti-stain in (G) Amino functional
construction silsesquioxanes
P-07-0625 08/14/07 11/11/07 CBI (G) Additive for inks (G) Cyclic amine
and cleaners polymer with
epoxides,
alkylcarboxy derivs.
P-07-0626 08/14/07 11/11/07 CBI (G) Toner additive (G) Methyl trialkyl
ammonium chloride,
reaction products
with silicic acid,
lithium, magnesium
and sodium salt
P-07-0627 08/14/07 11/11/07 CBI (S) Acrylic polymer (G) Acrylic polymer
used in the
manufacture of
adhesive tapes
P-07-0628 08/14/07 11/11/07 CBI (G) Non-dispersive (G) Blocked aromatic
use isocyanate
P-07-0629 08/14/07 11/11/07 Croda Inc. (G) Polymer additive (G) Polyethylene
glycol dierucate
P-07-0630 08/15/07 11/12/07 CBI (G) Additive, open, (G) Polyester
non-dispersive use polyether urethane
block copolymer
P-07-0631 08/15/07 11/12/07 CBI (G) Additive, open, (G) Polyester
non-dispersive use polyether urethane
block copolymer
P-07-0632 08/15/07 11/12/07 CBI (G) Additive, open, (G) Polyester
non-dispersive use polyether urethane
block copolymer
P-07-0633 08/15/07 11/12/07 Angus Chemical (S) Intermediate (G) Nitroalcohol
Company, a chemical derivative
subsidiary of the
Dow Chemical Company
P-07-0634 08/15/07 11/12/07 Angus chemical (S) Metal working (G) Alkanolamine
Company, a fluid additive derivative
subsidiary of the
Dow Chemical Company
P-07-0635 08/16/07 11/13/07 CBI (G) Coating component (G) Styrene, polymer
with methacrylate
ester, alkene, and
substituted
trialkoxysilane
P-07-0636 08/17/07 11/14/07 CBI (G) Chemical (G) Aluminum mixed
intermediate / metal and diol
catalyst complex
P-07-0637 08/17/07 11/14/07 CBI (G) Chemical (G) Aluminum mixed
intermediate / metal and mixed diol
catalyst complex
P-07-0638 08/16/07 11/13/07 Chemtek, Inc. (S) Concrete cleaner (G) Alkylphosphonic
component acid mixture,
lithium salt
P-07-0639 08/20/07 11/17/07 CBI (S) Gas hydration (G) Ether carboxylic
inhibitor acid amide
P-07-0640 08/20/07 11/17/07 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-07-0641 08/21/07 11/18/07 Spectra Colors Corp. (G) Dye for washable (G) Ethoxylated
ink systems triphenylmethane
P-07-0642 08/17/07 11/14/07 CBI (G) Cleaning and (G) Polystyrene
polishing chemical derivative
for semiconductor
manufacturing
P-07-0643 08/22/07 11/19/07 DIC International (G) Acrylic resin for (G) Hydroxyalkyl
(USA), LLC. coatings methacrylate,
polymer with
branched benzene,
alkyl alkenoate and
alkyl fumarate
P-07-0644 08/16/07 11/13/07 Chemtek, Inc. (S) Concrete cleaner (G) Alcohol,
component ethoxylated,
phosphated, lithium
salt
P-07-0645 08/22/07 11/19/07 DIC International (G) Acrylic resin for (G) Hydroxyalkyl
(USA), LLC. coatings methacrylate,
polymer with
branched benzene,
alkyl (c=1-6)
methacrylate, alkyl
acrylate and
alkenoic acid
P-07-0646 08/23/07 11/20/07 Firmenich Inc. (G) Chemical (S) Dodecane, 1,1,3-
intermediate triethoxy-
P-07-0647 08/23/07 11/20/07 Firmenich Inc (G) Chemical (S) Decane, 1,1-
intermediate diethoxy-
P-07-0648 08/22/07 11/19/07 Incorez Corporation (S) Amine hardener (G) Polyamnine
used in the hardner
formulation of epoxy
based paints and
coatings
P-07-0649 08/22/07 11/19/07 CBI (G) Coating (surface (G) Urethane resin
treatment)
P-07-0650 08/24/07 11/21/07 CBI (G) Paper product (G) Glyoxalated
additive acrylamide, dadmac,
2-
hydroxyethylacrylate
ternary copolymer
with amine-amide
adduct
P-07-0651 08/24/07 11/21/07 CBI (G) Crosslinker for (G) Amine-amide
polyacrylamides; adduct
additive for resins
P-07-0652 08/24/07 11/21/07 Bio-based (G) Plastics (S) Soybean oil,
Technologies, LLC reaction products
with diethanolamine
and ethaneperoxoic
acid
[[Page 56350]]
P-07-0653 08/24/07 11/21/07 CBI (S) Flame retardant (G) Ethoxylated
for plastics (eg. methylphosphonic
polyurethane) acid
P-07-0654 08/07/07 11/04/07 Cara Plastics Inc (S) Composite resins (G) Maleinated
crosslinker Acrylated epoxided
Soy oil
P-07-0655 08/22/07 11/19/07 CBI (S) Binder for in- (G) Waterborne
mold coatings polyurethane
P-07-0656 08/28/07 11/25/07 CBI (G) Dyestuff (G) Substituted
triazine derivative
P-07-0657 08/28/07 11/25/07 CBI (G) Dyestuff (G) Substituted
benzimidazol
sulfonic acid
P-07-0658 08/29/07 11/26/07 R. T. Vanderbilt (S) Anti-wear and (S) Amine bis(C11 14
Company, Inc. anti-oxidant agent branched and linear
for lubricants alkyl), tungstates
P-07-0659 08/29/07 11/26/07 CBI (G) Dyestuff (G) Substituted
triazine derivative
P-07-0660 08/29/07 11/26/07 CBI (G) Dyestuff (G) Substituted
anthraquinone
derivative
P-07-0661 08/29/07 11/26/07 CBI (G) Dyestuff (G) Substituted
phthalocyanine
P-07-0662 08/29/07 11/26/07 Cytec Industries Inc. (S) Flow-leveling (G) Substituted
additive for alkenyl-terminated
industrial coatings siloxanes and
silicones polymers
with substituted
acrylates, peroxide
initiated
P-07-0664 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0665 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0666 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0667 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0668 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0669 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0670 09/04/07 12/02/07 CBI (S) Chemical (G) Butanoic acid,
intermediate (1R)-1-ethenylalkyl
ester
P-07-0671 09/04/07 12/02/07 CBI (G) Lamination (G) Polyurethane
adhesive adhesive
P-07-0672 09/05/07 12/03/07 CBI (G) Metal working (G) Polyethylene
fluid glycol ether acid
P-07-0673 09/05/07 12/03/07 Mane, USA (G) Perfumery (S) 2(3H)-furanone,5-
ingredient (6-heptenyl)dihydro-
P-07-0674 09/07/07 12/05/07 CBI (G) Protective (G) Oxirane,
coating substituted
siliylmethyl-,
hydrolysis products
with alkanol
zirconium(4+) salt
and silica, acetates
P-07-0675 09/06/07 12/04/07 CBI (G) Destructive use (G) Phenolic amine
(antioxidant)
P-07-0676 09/06/07 12/04/07 CBI (G) Destructive use (G) Phenolic amine
(antioxidant)
P-07-0677 09/07/07 12/05/07 Itw Devcon Futura (S) Chemical (G) Aspartic acid, N-
Coatings intermediate alkyl,N-
(isocyanatoalkyl)-
,alkyl ester
P-07-0678 09/06/07 12/04/07 CIBA Specialty (G) Paper additive (G) substituted
Chemicals Benzenemethanaminium
Corporation chloride/acrylamide/
acrylic acid/
substituted
ethanaminium
chloride polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 4 Test Marketing Exemption Notices Received From: 8/03/07 to 09/07/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-07-0020 08/07/07 09/20/07 CBI (G) Component of (G) Aliphatic
industrial use polyurethane
coating acrylate
T-07-0021 08/17/07 09/30/07 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
T-07-0022 08/10/07 09/23/07 Shell lubricants (S) Synthesis high (S) Mixture of
melt paraffinwax hydrocarbons (C20-
designed for C110) containing
numerous industrial straight and
application branched chain
alkanes produced by
synthesis from
natural gas (fisher-
tropsch)
T-07-0023 08/30/07 10/13/07 Cytec Industries Inc. (S) Flow-leveling (G) Substituted
additive for alkenyl-terminated
industrial coatings siloxanes and
silicones polymers
with substituted
acrylates, peroxide
initiated
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 56351]]
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 49 Notices of Commencement From: 8/03/07 to 09/07/07
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-05-0321 09/06/07 08/15/07 (G) Mono-methyl maleate/
acrylic acid/
hydroxypropyl
methacrylate copolymer
P-06-0069 08/29/07 08/17/07 (G) Dialkyl carbocyclo-,
reaction products with
alkadiene, by-products
from, distant residues
P-06-0166 08/06/07 07/22/07 (S) 3h-1,2,4-triazol-3-
one, 1,2-dihydro-
P-06-0229 08/27/07 08/06/07 (G) Unsaturated aliphatic
urethane acrylate
P-06-0334 08/09/07 07/17/07 (G) Modified polyurethane
P-06-0343 08/29/07 08/17/07 (G) Dialkyl carbocyclo-,
reaction products with
alkadiene, cyclized,
dehydrogenated,
isomerized, by-products
from, distant residues
P-06-0438 08/07/07 07/21/07 (G) Fatty acids, C18-
unsaturated, dimers,
hydrogenated, polymers
with polypropylene glycol
diamine, amino acid and
polyoxyalkylenepolyamine
P-06-0576 08/06/07 07/12/07 (G) Fluoroalkylacrylate
copolymer
P-06-0608 08/29/07 08/06/07 (G) Alkyl acrylate,
polymer with alkyl
acrylates, styrene and
hydroxyalkyl acrylates,
peroxide-initiated
P-06-0677 09/05/07 08/01/07 (G) Ethylene interpolymer
P-06-0690 08/15/07 07/26/07 (G) Diphenylmethane
isocyanate polyester
elastomer
P-06-0692 08/13/07 07/16/07 (G) Derivatized
hydroxylated
triglycerides
P-06-0752 08/03/07 07/27/07 (G) Modified imidazole
P-06-0815 09/04/07 08/24/07 (S) 1,2-ethanediamine, N-
[3-
(trimethoxysilyl)propyl]-
, hydrolysis products
with wollastonite
(CA(SI03))
P-06-0816 08/16/07 07/18/07 (G) Modified reaction
products of alkyl
alcohol, halogenated
alkane, substituted
epoxide, and amino
compound
P-06-0829 08/06/07 08/02/07 (S) Fatty acids, canola-
oil, me esters
P-07-0009 08/27/07 08/07/07 (G) Aqueous polyurethane
dispersion
P-07-0058 08/22/07 08/13/07 (S) 3-hexene, 1-(2-
butenyloxy)-, (3Z)-
P-07-0087 09/04/07 08/28/07 (G) Partially fluorinated
condensation polymer
P-07-0097 08/09/07 06/08/07 (S) 2-propenoic acid, 2-
methyl-, butyl ester,
polymer with
ethenylbenzene and 2-
sulfoethyl 2-methyl-2-
propenoate, ammonium salt
P-07-0220 08/13/07 07/05/07 (G) Aliphatic polyester-
polyether polyurethane
resin
P-07-0228 08/31/07 08/20/07 (G) Polyether modified
polydimethylsiloxane
P-07-0253 09/07/07 08/14/07 (G) Polyether-modified
siloxane
P-07-0258 08/22/07 08/03/07 (G) Acrylic acid polymer
with vinylphosphonic acid
and ethylene glycol
acrylate
P-07-0261 08/08/07 07/05/07 (G) Urethane acrylate
resin
P-07-0268 08/09/07 06/08/07 (G) Substituted
benzoxazolium salt
P-07-0283 08/22/07 08/14/07 (S) Thiophene, 2,5-dibromo-
3-hexyl-
P-07-0286 08/23/07 07/30/07 (G) Phenol, 4,4'-(1-
methylethylidene)bis[disu
bstituted-, polymer with
disubstituted phenol
P-07-0287 08/17/07 08/01/07 (G) Phenol, 4,4'-(1-
methylethylidene)bis[disu
bstituted-, polymer with
disubstituted phenol,
substituted propenoate
P-07-0301 08/16/07 07/30/07 (G) Thioketone
P-07-0329 09/07/07 08/16/07 (G) Derivative of 2,4-
dihydroxy benzophenone
P-07-0332 08/29/07 08/10/07 (G) Alkyloxy carboxylic
acid
P-07-0335 08/03/07 07/27/07 (G) Epoxy resin
P-07-0337 08/16/07 08/01/07 (G) Polyester polyurethane
P-07-0349 08/30/07 08/23/07 (G) Fluorinated
alkylammonium salt
P-07-0367 08/08/07 07/20/07 (G) Fluorinated zinc
dialkyldithiophosphate
P-07-0369 08/21/07 07/30/07 (S) Definition:
Extractives and thier
physically modified
derivatives. Populus
Nigra
P-07-0369 08/21/07 07/30/07 (S) Oils, poplar, Populus
Nigra
P-07-0370 08/06/07 07/23/07 (G) Glycol phosphite
P-07-0379 08/08/07 08/01/07 (S) Ethanol, 2,2',2''-
nitrilotris-, polymer
with .alpha.-hydro-
.omega.-hydroxypoly(oxy-
1,4-butanediyl) and 1,1'-
methylenebis[4-
isocyanatocyclohexane], 2-
hydroxyethyl acrylate-
blocked
P-07-0393 08/06/07 07/28/07 (G) Isocyanate functional
polyester urethane
polymer
P-07-0401 08/17/07 08/01/07 (S) 2-propenoic acid, 2-
methyl, 2-hydroxyethyl
ester, homopolymer
P-07-0412 08/23/07 08/04/07 (G) 2-propenoic acid, 2-
methyl-, polymer with 2-
ethylhexyl 2-propenoate,
methyl 2-methyl-2-
propanoate, substituted-1-
propanesulfonic acid and
2-methyl-2-propenamide
P-07-0416 08/07/07 08/06/07 (G) Aziridine homopolymer
derivative
P-07-0429 08/08/07 08/06/07 (G) Substituted propenoic
acid polymer with
substituted bisethanol
and substituted
cyclohexane
P-07-0437 09/04/07 08/26/07 (G) Siloxanes and
silicones, di-alkyl,
