Certain New Chemicals; Receipt and Status Information, 47026-47037 [E7-16318]
Download as PDF
<![CDATA[
47026
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
Mexico (as listed in ADDRESSES). The
dockets in New Mexico contain only
major items from the official Air Docket
in Washington, DC, plus those
documents added to the official Air
Docket since the October 1992
enactment of the WIPP LWA.
Dated: August 16, 2007.
Elizabeth Cotsworth,
Director, Office of Radiation and Indoor Air.
[FR Doc. E7–16612 Filed 8–21–07; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
EPA–HQ–OPPT–2007–0817; FRL–8144–7
Certain New Chemicals; Receipt and
Status Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
jlentini on PROD1PC65 with NOTICES
AGENCY:
SUMMARY: Section 5 of the Toxic
Substances Control Act (TSCA) requires
any person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory) to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a
premanufacture notice (PMN) or an
application for a test marketing
exemption (TME), and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from April 29, 2007 to
August 3, 2007, consists of the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the
specific PMN number or TME number,
must be received on or before
September 21, 2007.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2007–0817, by
one of the following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the on-line
instructions for submitting comments.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001.
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
• Hand Delivery: OPPT Document
Control Office (DCO), EPA East Bldg.,
Rm. 6428, 1201 Constitution Ave., NW.,
Washington, DC. Attention: Docket ID
number EPA–HQ–OPPT–2007–0817.
The DCO is open from 8 a.m. to 4 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
DCO is (202) 564–8930. Such deliveries
are only accepted during the Docket’s
normal hours of operation, and special
arrangements should be made for
deliveries of boxed information.
Instructions: Direct your comments to
docket ID number EPA–HQ–OPPT–
2007–0817. EPA’s policy is that all
comments received will be included in
the public docket without change and
may be made available online at https://
www.regulations.gov, including any
personal information provided, unless
the comment includes information
claimed to be Confidential Business
Information (CBI) or other information
whose disclosure is restricted by statute.
Do not submit information that you
consider to be CBI or otherwise
protected through regulations.gov or email. The regulations.gov website is an
‘‘anonymous access’’ systems, which
means EPA will not know your identity
or contact information unless you
provide it in the body of your comment.
If you send an e-mail comment directly
to EPA without going through https://
regulations.gov your e-mail address will
be automatically captured and included
as part of the comment that is placed in
the public docket and made available on
the Internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket, visit the EPA
Docket Center homepage at https://
www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket
are listed in the docket’s index available
in regulations.gov. To access the
electronic docket, go to https://
www.regulations.gov, select ‘‘Advanced
Search,’’ then ‘‘Docket Search.’’ Insert
the docket ID number where indicated
and select the ‘‘Submit’’ button. Follow
the instructions on the regulations.gov
web site to view the docket index or
access available documents. Although
listed in the index, some information is
not publicly available, e.g., Confidential
Business Information (CBI) or other
PO 00000
Frm 00075
Fmt 4703
Sfmt 4703
information whose disclosure is
restricted by statute. Certain other
material, such as copyrighted material,
will be publicly available only in hard
copy. Publicly available docket
materials are available electronically at
https://www.regulations.gov, or, if only
available in hard copy, at the OPPT
Docket. The OPPT Docket is located in
the EPA Docket Center (EPA/DC) at Rm.
3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington,
DC. The EPA/DC PublicReading Room
hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding
Federal holidays. The telephone
numberof the EPA/DC Public Reading
Room is (202) 566–1744, and the
telephone number for the OPPT Docket
is (202) 566–0280. Docket visitors are
required to show photographic
identification, pass through a metal
detector, and sign the EPA visitor log.
All visitor bags are processed through
an X-ray machine and subject to search.
Visitors will be provided an EPA/DC
badge that must be visible at all times
in the building and returned upon
departure.
FOR FURTHER INFORMATION CONTACT:
Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division,
Office of Pollution Prevention and
Toxics (7408M), Environmental
Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460–
0001; telephone number: (202) 554–
1404; e-mail address: TSCAHotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitter
of the premanufacture notices addressed
in the action. If you have any questions
regarding the applicability of this action
to a particular entity, consult the person
listed under FOR FURTHER INFORMATION
CONTACT.
B. What Should I Consider as I Prepare
My Comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or e-mail. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD ROM that
you mail to EPA, mark the outside of the
disk or CD ROM as CBI and then
identify electronically within the disk or
CD ROM the specific information that is
E:\FR\FM\22AUN1.SGM
22AUN1
47027
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
claimed CBI). In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When submitting comments, remember
to:
i. Identify the document by docket
number and other identifying
information (subject heading, Federal
Register date and page number).
ii. Follow directions - The agency may
ask you to respond to specific questions
or organize comments by referencing a
Code of Federal Regulations (CFR) part
or section number.
iii. Explain why you agree or disagree;
suggest alternatives and substitute
language for your requested changes.
iv. Describe any assumptions and
provide any technical information and/
or data that you used.
v. If you estimate potential costs or
burdens, explain how you arrived at the
estimate.
vi. Provide specific examples to
illustrate your concerns, and suggested
alternatives.
vii. Explain your views as clearly as
possible, avoiding the use of profanity
or personal threats.
viii. Make sure to submit your
comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any
person who intends to manufacture
(defined by statute to include import) a
new chemical (i.e., a chemical not on
the TSCA Inventory to notify EPA and
comply with the statutory provisions
pertaining to the manufacture of new
chemicals. Under sections 5(d)(2) and
5(d)(3) of TSCA, EPA is required to
publish a notice of receipt of a PMN or
an application for a TME and to publish
periodic status reports on the chemicals
under review and the receipt of notices
of commencement to manufacture those
chemicals. This status report, which
covers the period from April 29, 2007 to
August 3, 2007, consists of the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period.
III. Receipt and Status Report for PMNs
and TMEs
This status report identifies the PMNs
and TMEs, both pending or expired, and
the notices of commencement to
manufacture a new chemical that the
Agency has received under TSCA
section 5 during this time period. If you
are interested in information that is not
included in the following tables, you
may contact EPA as described in Unit II.
to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the PMNs received by EPA
during this period: the EPA case number
assigned to the PMN; the date the PMN
was received by EPA; the projected end
date for EPA’s review of the PMN; the
submitting manufacturer; the potential
uses identified by the manufacturer in
the PMN; and the chemical identity.
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07
Case No
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Laureth maleate
(G) Mdi prepolymer
(G) 2-propenoic acid, 2- methyl-, polymer with 2-ethylhexyl 2-propenoate,
methyl 2-methyl-2-propanoate, substituted-1-propanesulfonic acid and
2-methyl-2-propenamide
(S) Phenol, 2-bromo-4-methyl-
04/30/07
05/01/07
05/01/07
07/28/07
07/29/07
07/29/07
CBI
CBI
Nippon Gohsei USA
Company, Ltd.
(G) Intermediate
(G) Open non-dispersive (elastomer)
(G) Ink additive
P–07–0413
05/02/07
07/30/07
05/02/07
05/02/07
07/30/07
07/30/07
Boulder Scientific
Company
CBI
Dover Chemical Corporation
(S) Chemical intermediate
P–07–0414
P–07–0415
P–07–0416
P–07–0417
05/03/07
05/04/07
07/31/07
08/01/07
CBI
Plextronics, Inc.
P–07–0418
P–07–0419
P–07–0420
P–07–0421
P–07–0422
jlentini on PROD1PC65 with NOTICES
P–07–0410
P–07–0411
P–07–0412
05/04/07
05/04/07
05/04/07
05/04/07
05/04/07
08/01/07
08/01/07
08/01/07
08/01/07
08/01/07
CBI
CBI
CBI
CBI
CBI
P–07–0423
05/04/07
08/01/07
CBI
(G) Component of paint
P–07–0424
05/04/07
08/01/07
CBI
(G) Component of adhesive
P–07–0425
05/07/07
08/04/07
CBI
(G) Open non-dispersive (resin)
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Frm 00076
(G) Catalyst intermediate
(S) Lubricant additive used in industrial lubricants and metalworking
fluids
(G) Fabric performance treatment
(S) For use as a component in inks
that will function as an active layer
in printed electronic devices
(G) Synthetic lubricant base stock
(G) Synthetic lubricant base stock
(G) Synthetic lubricant base stock
(G) Synthetic lubricant base stock
(S) Waterborne flooring applications;
waterborne epoxy coatings
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
(G) Alkyl heteroalkyl chloride
(S) Soybean oil, nitrated
(G) Aziridine homopolymer derivative
(G) Modified thiophene polymer
(G) Hydrogenated polyalphaolefins
(G) Hydrogenated polyalphaolefins
(G) Hydrogenated polyalphaolefins
(G) Hydrogenated polyalphaolefins
(G)
Phenol,
4,4′-(1methylethylidene)bis-, polymer with
2-(chloromethyl)oxirane
and
a
polyol, reaction products with 5amino-1,3,3trimethylcyclohexanemethanamine
derivatives, an aromatic alkyl amine
and an alkyl amine
(G) Acrylic polymer with styrene and
polyethylene glycol methyl ether
methacrylate
(G) Acrylic polymer with vinyl acetate
and acrylonitrile
(G) Mdi polyether prepolymer
22AUN1
47028
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Case No
Received
Date
Projected
Notice
End Date
05/07/07
05/07/07
05/07/07
08/04/07
08/04/07
08/04/07
P–07–0429
05/07/07
08/04/07
P–07–0430
05/08/07
08/05/07
P–07–0431
05/04/07
P–07–0432
Use
CBI
CBI
Boulder Scientific
Company
CBI
(G) Open non-dispersive (resin)
(G) Open non-dispersive (resin)
(S) Catalytic reaction component
(G) Component of electrical laminates
08/01/07
The Dow Chemical
Company
CBI
05/04/07
08/01/07
CBI
(G) Polyester fiber
P–07–0433
P–07–0434
05/08/07
05/09/07
08/05/07
08/06/07
CBI
Ticona
(G) Catalyst
(G) Non-woven
P–07–0435
05/11/07
08/08/07
CBI
P–07–0436
05/11/07
08/08/07
CBI
(G) Coating resin for open, non-dispersive use
(S) Solder mask for printed circuit
board preparation
P–07–0437
05/11/07
08/08/07
CBI
(G) Defoamer
P–07–0438
05/11/07
08/08/07
CBI
P–07–0439
05/11/07
08/08/07
CBI
(G) Polyol component in polyester
resin synthesis - destructive use
(G) Dispersant
P–07–0440
05/14/07
08/11/07
CBI
P–07–0441
05/15/07
08/12/07
CBI
P–07–0442
05/15/07
08/12/07
CBI
(S) Alkylamino zirconium salt used in
Chemical vapor deposition methods
during the manufacture or processing of semiconductors
(G) Chemical manufacturing intermediate
(G) Coating raw material
P–07–0443
05/15/07
08/12/07
CBI
(G) Dispersant for inorganic materials
P–07–0444
05/16/07
08/13/07
CBI
P–07–0445
05/17/07
08/14/07
CBI
(S) Compatibilizer for flame retardant
for plastics
(G) Tile surface treatment
P–07–0446
P–07–0447
P–07–0448
05/17/07
05/17/07
05/18/07
08/14/07
08/14/07
08/15/07
CBI
CBI
CBI
P–07–0449
05/18/07
08/15/07
Cytec Industries Inc.
P–07–0450
05/18/07
08/15/07
P–07–0451
jlentini on PROD1PC65 with NOTICES
P–07–0426
P–07–0427
P–07–0428
Manufacturer/Importer
05/21/07
08/18/07
Vitech International
Inc.
CBI
P–07–0452
P–07–0453
P–07–0454
05/22/07
05/22/07
05/22/07
08/19/07
08/19/07
08/19/07
CBI
CBI
CBI
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Frm 00077
(G) Additive for water-soluble ink.
(G) Polyester fiber
(G) Paper treatment additive
(G) Textile treatment additive
(G) Reactant in thermoset coating;
degree of containment - (c) open,
non-dispersive use
(S) Wetting agent for industrial coatings
(S) Organic salt for dissolving inorganic salts
(G) Polyol component in polyester
resin synthesis - destructive use
(G) Coatings and inks
(G) An open non-dispersive use
(G) An open non-dispersive use
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
Chemical
(G) Mdi polyester prepolymer
(G) Mdi polyester prepolymer
(S) 1,2-cyclohexanediamine, (1r,2r)rel(G) Substituted propenoic acid polymer with substituted bisethanol and
substituted cyclohexane
(G) Brominated epoxy novolac
(G) Ncs 1: Modified polyethylene
terephthalate
(G) Ncs 2: Modified polyethylene
terephthalate
(G) Alkyl heteroaryl chloroaluminate
(G)
Copolymer
of
2,6naphthalenedicarboxylic acid dialkyl
ester and alkylene diol
(G) Copolymer of acrylic acrylates,
methacrylates and acid
(G) 2-propenoic acid, 2-methyl-,
oxiranylmethyl ester, polymer with
3-hydroxy-2-(hydroxymethyl)-2methylpropanoic acid, an alkyl
polyol and an aliphatic isocyanate
(G) Siloxanes and silicones, di-alkyl,
chlorine-terminated, polymers with
2-ethylhexyl
acrylatepolyoxyalkylene glycol reaction
products, polyoxyalkylene glycol
mono-alkyl ether-terminated
(G) Polyester polyol
(G) Polycarboxylate, modified sodium
salt
(G) Alkylamino zirconium salt
(G) Glycerides, alkyl
(G) Alkenoic acid, hydroxyalkyl ester,
polymer with alkyl diisocyanate
(G) Methacrylate copolymer with
phosphinicobis methacrylate and 2(phosphonooxy) ethyl 2-methyl-2propenoate,
sodium
salt,
peroxydisulfuric acid ([ho)s(o)2]2o2)
diammonium salt-initiated
(G) Surface modified aluminum hydroxide
(G) Fluoroalkyl methacrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Fluoroalkyl acrylate copolymer
(G) Secondary amine adduct
(G) Substituted heterocycle, polymer
with diisocyanate, substituted cyclic
diamine
and
substituted
heterocycle, alkyl ester
(G) Urea, salt
(G) Polyester polyol
(G) Acrylate ester
(G) Halide salt of an alkylamine
(G) Alkyl amine
22AUN1
47029
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Case No
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Alkyl amidoamine
(G) Alkylamine
(G) Maleic modified soybean oil alkyd
(G) Bismaleimide resin
(G) Quarternized polyether modified
aminomodified
substituted
polysiloxane
(G) Polyoxyethylene alkyl ether phosphate
(G) Derivative of a salt of a polymer
of styrene, substituted methacrylic
acid and an alkyl acrylate
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
(G) Fatty acid polymer with aliphatic
diol and aromatic diacid
(G)
Siloxanes
coated
alumina
nanoparticles
(G)
Siloxane
coated
silica
nanoparticles
(G) Reaction product of a substituted
pyridine, paraformaldehyde, hydrochloric acid, and an alkylamine
(G) Brominated epoxy novolac
05/22/07
05/22/07
05/24/07
05/24/07
05/24/07
08/19/07
08/19/07
08/21/07
08/21/07
08/21/07
CBI
CBI
CBI
CBI
Huntsman International, LLC
(G) An open non-dispersive use
(G) An open non-dispersive use
(G) Industrial ink additive
(G) Thermoset resin
(S) Moisture management agent for
cotton and synthetic fabrics
P–07–0460
05/25/07
08/22/07
CBI
(G) Monomer
P–07–0461
05/25/07
08/22/07
CBI
(G) Quality control additive
P–07–0462
05/29/07
08/26/07
CBI
(G) Component of foam
P–07–0463
05/29/07
08/26/07
CBI
(G) Component of foam
P–07–0464
05/29/07
08/26/07
CBI
(G) Component of foam
P–07–0465
05/30/07
08/27/07
Byk-Chemie USA Inc.
(S) Additive for coatings
P–07–0466
05/30/07
08/27/07
Byk-chemie USA Inc.
(S) Additive for coatings
P–07–0467
05/30/07
08/27/07
CBI
(G) Corrosion inhibitor for oilfield use
P–07–0468
05/30/07
08/27/07
05/24/07
08/21/07
P–07–0470
P–07–0471
05/31/07
06/01/07
08/28/07
08/29/07
The Dow Chemical
Company
J.M. Huber Corporation
CBI
CBI
(G) Component of electrical laminates
P–07–0469
P–07–0472
06/01/07
08/29/07
GE water and process
technologies
P–07–0473
06/01/07
08/29/07
CBI
(G) Industrial primary wastewater
clarification treatment, coagulants,
open, non-disperse
(S) Binder for wood floor lacquers
P–07–0474
06/04/07
09/01/07
P–07–0475
05/31/07
08/28/07
Eastman Chemical
Company
Huntsman Corporation
(S) Molded plastic parts; extruded
sheeting
(S) Liquid soap
P–07–0476
05/31/07
08/28/07
Huntsman Corporation
(S) Liquid soap
P–07–0477
05/31/07
08/28/07
Huntsman Corporation
(S) Liquid soap
P–07–0478
05/31/07
08/28/07
Huntsman Corporation
(S) Liquid soap
P–07–0479
05/31/07
08/28/07
Huntsman Corporation
(S) Liquid soap
P–07–0480
06/04/07
09/01/07
Cytec Industries Inc.
(G) Crosslinking resin
P–07–0481
06/05/07
09/02/07
CBI
(G) Ink additive
P–07–0482
06/05/07
09/02/07
CBI
P–07–0483
06/05/07
09/02/07
CBI
(G) Lubricant formulation for textile
fiber processing.
(G) Ink additive
P–07–0484
jlentini on PROD1PC65 with NOTICES
P–07–0455
P–07–0456
P–07–0457
P–07–0458
P–07–0459
06/07/07
09/04/07
CBI
P–07–0485
05/30/07
08/27/07
Fibro Chem LLC
(G) Specialty polyol for in-house manufacturing
(S) Odor control agent for soft and
hard surfaces
P–07–0486
06/08/07
09/05/07
CBI
(G) Emulsifier and dispersant
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Frm 00078
(S) Flame retardant
(G) Cosolvent
(G) Use: Spray-applied paint; degree
of containment: Open, non-dispersive
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
(G) Magnesium hydroxide surface
treated
(G) Alkyl cycloether
(G) Carbomonocylic dicarboxylic acid
polymer containing trimethyl substituted alkane diol and 1,6hexanediol
(G) Amphoteric acrylic polymer
(G) Dimer fatty acid based polyester
polyurethane
(G) Modified copolyester
(S) Decanoic acid, methyl-2-sulfoethyl
ester, sodium salt (1:1)
(S) Dodecanoic acid, methyl-2sulfoethyl ester, sodium salt (1:1)
(S) Tetradecanoic acid, methyl-2sulfoethyl ester, sodium salt (1:1)
(S) Hexadecanoic acid, methyl-2sulfoethyl ester, sodium salt (1:1)
(S) Fatty acids, C10–16, methyl-2sulfoethyl esters, sodium salts
(G) Alkylated glycoluril formaldehyde
resin
(G)
Phosphonium,
tetraaryl-,
tetrakis(aryl)borate(1-)
(G) Pentaerythritol cocoate
(G) Urethane polymer methacrylateblocked
(G) Mixed glycol adipate polyester
polyol
(S) Siloxanes and silicones, di-me, 3hydroxypropyl me, ethers with polyethylene glycol mono(hydrogen
succinate), zinc salts
(G) Copolymer of alkenyl
22AUN1
47030
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Case No
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
06/11/07
09/08/07
Cytec Industries Inc.
(G) Resin for paints and coatings
P–07–0488
P–07–0489
06/12/07
06/11/07
09/09/07
09/08/07
CBI
CBI
P–07–0490
06/11/07
09/08/07
Sasol North America
Inc.
P–07–0491
06/11/07
09/08/07
Sasol North America
Inc.
P–07–0492
06/13/07
09/10/07
CBI
(G) Open, non-dispersive use
(G) Additive, open, non-dispersive
use
(S) Alcohol derivatives - used alone
or blended with other alcohols as
feedstock
for
derivation
(i.e.
ethoxylation, propoxylation, sulfation, sulfonation, esterification
etc.); mining flotation aid-direct substitute for hexanol, octanol or
decanol PMN substance A and B;
metal rolling lubricant - direct
sustitute for hexanol, octanol or
decanol PMN substance A and B
(S) Alcohol derivatives - used alone
or blended with other alcohols as
feedstock
for
derivation
(i.e.
ethoxylation, propoxylation, sulfation, sulfonation, esterification
etc.); mining flotation aid-direct substitute for hexanol, octanol or
decanol PMN substance A and B;
metal rolling lubricant - direct
sustitute for hexanol, octanol or
decanol PMN substance A and B
(G) Dispersant for petroleum fraction
P–07–0493
06/13/07
09/10/07
Ticona
(S) Fibers
P–07–0494
P–07–0495
06/13/07
06/14/07
09/10/07
09/11/07
P–07–0496
06/14/07
09/11/07
CBI
Eastman Kodak Company
Huntsman International LLC
P–07–0497
P–07–0498
06/15/07
06/18/07
09/12/07
09/15/07
CBI
CBI
(G) Open non-dispersive (adhesive)
(S) Intermediate used in the manufacture of imaging media/products
(S) Preparation of pre-impregnated
cloth/fiber tapes for aerospace
composite articles
(S) Antioxidant for plastic articles
(S) Industrial coatings component; application
P–07–0499
06/18/07
09/15/07
CBI
(S) Industrial coatings component; application
P–07–0500
P–07–0501
P–07–0502
jlentini on PROD1PC65 with NOTICES
P–07–0487
06/19/07
06/19/07
06/20/07
09/16/07
09/16/07
09/17/07
CBI
CBI
CBI
(S) Prepolymer for polyurethane
(S) Prepolymer for polyurethane
(G) Polymeric coating vehicle
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Frm 00079
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
Chemical
(G) Unsaturated alkylcarboxylic acid,
polymers with alkanedioic acid,
alkyl alcohols, alkylaldehyde, substituted
triazine,
substituted
carbomonocycle and urea
(G) Pvb derivative
(G) Salt of alkylolaminoamid and
ethoxylated alcohols, phosphates
(S) 1-octanol, manufacture of, distn.
lights
(S) 1-decanol, manufacture of, distn.
lights.
(G) Maleic anhydride, polymer with Ntetradec-1-ene,N-hexadec-1-ene
and allylmethyl-poly[ethylene glycol], dicocoalkyl-, di[hydrogenated
tallow] amide/ammonium salt
(G)
Copolymer
of
2,6naphthalenedicarboxylic acid dialkyl
ester and alkylene diol
(G) Polyurethane
(G) Amino substituted benzoic acid
(S)
Oxiranemethanamine,
N-[3(oxiranylmethoxy)phenyl]-N(oxiranylmethyl)(G) Benzenpropanoic acid derivative
(S) 2-propenoic acid, 2-methyl-, butyl
ester, polymer with 2-ethylhexyl 2propenoate, 2-methylpropyl 2-methyl-2-propenoate
and
1,2propanediol
mono(2-methyl-2propenoate),
tert-bu
3,5,5trimethylhexaneperoxoate-initiated
(S) 2-propenoic acid, 2-methyl-, butyl
ester, polymer with 2-ethylhexyl 2propenoate, 2-methylpropyl 2-methyl-2-propenoate
and
1,2propanediol
mono(2-methyl-2propenoate), tert-bu peroxide-initiated
(G) Hydroxymodified silicone
(G) Hydroxymodified silicone
(G) Acrylic styrenic acrylamide
polyether ammonium salt polymer
22AUN1
47031
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Case No
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Siloxanes and silicones, di-alkyl,
hydrogen-terminated, polymers with
chlorotrialkylsilane-iso-pr alc.-silicic
acid sodium salt reaction products,
2-(7-oxabicyclo[4.1.0]alkyl
groupand 2-(trialkylsilyl) alkyl group-terminated
(G) Alkenoic acid, hydroxyalkyl ester,
polymer with alkyl diisocyanate
(G) Acrylic co-polymer
(G) 12-alkanedecen-10-yn-1-ol, (12Z)-
06/20/07
09/17/07
CBI
(G) Raw material for the manufacturing of release coatings
P–07–0504
06/20/07
09/17/07
CBI
(G) Coating raw material
P–07–0505
P–07–0506
06/21/07
06/21/07
09/18/07
09/18/07
06/22/07
06/22/07
09/19/07
09/19/07
CBI
Bedoukian research,
Inc.
CBI
CBI
(G) Color dispersant
(S) Chemical intermediate
P–07–0507
P–07–0508
P–07–0509
06/26/07
09/23/07
P–07–0510
06/26/07
09/23/07
Huntsman International, LLC
CBI
(S) Exhaust application to cotton fabric
(S) Resin for automotive coatings
P–07–0511
06/26/07
09/23/07
CBI
(S) Resin for automotive coatings
P–07–0512
06/26/07
09/23/07
CBI
(S) Resin for automotive coatings
P–07–0513
06/26/07
09/23/07
CBI
(S) Resin for automotive coatings
P–07–0514
06/20/07
09/17/07
06/27/07
06/26/07
06/28/07
09/24/07
09/23/07
09/25/07
Grain processing Corporation
CBI
CBI
CBI
(S) Animal bedding
P–07–0515
P–07–0516
P–07–0517
P–07–0518
06/28/07
09/25/07
CBI
(G) Paint
P–07–0519
P–07–0520
P–07–0521
06/28/07
06/28/07
06/26/07
09/25/07
09/25/07
09/23/07
CBI
CBI
CBI
(G) Colorant raw material
(G) Colorant raw material
(S) A component of ultraviolet light/
electron beam formulations
P–07–0522
06/28/07
09/25/07
CBI
(G) Colorant process intermediate
P–07–0523
06/28/07
09/25/07
CBI
(G) Colorant process intermediate
P–07–0524
P–07–0525
06/29/07
06/29/07
09/26/07
09/26/07
CBI
CBI
(S) Chemical intermediate
(G) Processing aid
P–07–0526
07/02/07
09/29/07
CBI
(S) Laminating adhesive
P–07–0527
P–07–0528
07/02/07
07/02/07
09/29/07
09/29/07
CBI
CBI
P–07–0529
07/03/07
09/30/07
CIBA Specialty Chemicals Corporation
(G) Lubricant additive
(G) Coating resin for open, non-dispersive use
(S) Coating systems rheology modifier
P–07–0530
jlentini on PROD1PC65 with NOTICES
P–07–0503
07/02/07
09/29/07
The Dow Chemical
Company
(S) Polymer intermediate for coatings,
adshesives, and elastomers
P–07–0531
07/02/07
09/29/07
The Dow Chemical
Company
(S) Polymer intermediate for coatings,
adshesives, and elastomers
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Frm 00080
(S) Corrosion inhibitor
(S) Diesel fuel additive
(G) Open, non-dispersive use.
(G) Adhesive
(G) Paint
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
(G) Oligomeric halogen salt
(G) Ethene-vinyl acetate-acrylatealdehyde modified polymer
(G) Reactive cyclodextrin derivative
(G) Branched acid
ester
(G) Branched acid
ester
(G) Branched acid
ester
(G) Branched acid
ester
(S) Palm kernel meal
functional polyfunctional polyfunctional polyfunctional poly-
(G) Acrylic latex
(G) Urethane resin
(G) Alkyl acrylate, polymer with alkyl
acrylates, styrene and hydroxyalkyl
acrylates, peroxide-initiated
(G) Alkyl acrylate, polymer with alkyl
acrylates, strene and hydroxyalkyl
acrylates, peroxide-initiated
(G) Aminobenzene
(G) Aminobenzene
(G) Poly[oxy(methyl-1,2-ethanediyl)],
.alpha., .alpha.′, .alpha.′′-1,2,3propanetriyltris[.omega.-hydroxy-,
polymer with aliphatic isocyanate,
2-hydroxyethyl acrylate-blocked
(G) Carbon black, (3-methylphenyl)modified, substituted
(G) Carbon black, (4-methylphenyl)modified, substituted
(G) Dialkyl methyl amine
(G) Fatty acids, hydrogenated, reaction
products
with
tetraethylenepentamine,
aliphatic
carboxylate
(G)
Acrylated-capped
polyester
polyether polyurethane
(G) Organic acid phosphate
(G) Acrylated polyurethane
(G) 2-propenoic acid, 2-methyl-,
telomer with 1-alkylthiol, alkyl 2propenoate and alkyl 2-methyl-2propenoate, ammonium salt
(G) Diol initiated polymer with fatty
acids
methyl
esters
hydroformylation products, hydrogenated
(G) Diol initiated polymer with fatty
acids
methyl
esters
hydroformylation products, hydrogenated
22AUN1
47032
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Case No
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(G) Diol initiated polymer with fatty
acids
methyl
esters
hydroformylation products, hydrogenated
(G) Diol initiated polymer with fatty
acids
methyl
esters
hydroformylation products, hydrogenated
(G) Diol initiated polymer with fatty
acids
methyl
esters
hydroformylation products, hydrogenated
(G) Diol initiated polymer with fatty
acids
methyl
esters
hydroformylation products, hydrogenated
(G) Aromatic hydrogenated poly
alkyldiene containing poly alkyl
methacrylate
(G)
Alkanenitrile,
bis(cyanoalkyl)amino
(G) Organic tallate salt
(G) Epoxy acrylic resin
07/02/07
09/29/07
The Dow Chemical
Company
(S) Polymer intermediate for coatings,
adshesives, and elastomers
P–07–0533
07/02/07
09/29/07
The Dow Chemical
Company
(S) Polymer intermediate for coatings,
adshesives, and elastomers
P–07–0534
07/02/07
09/29/07
The Dow Chemical
Company
(S) Polymer intermediate for coatings,
adshesives, and elastomers
P–07–0535
07/02/07
09/29/07
The Dow Chemical
Company
(S) Polymer intermediate for coatings,
adshesives, and elastomers
P–07–0536
07/03/07
09/30/07
CBI
P–07–0537
07/03/07
09/30/07
CBI
(S) Improver for the viscosity index
and the low temperature fluidity of
driveline oils
(G) Chemical intermediate
P–07–0538
P–07–0539
07/05/07
07/05/07
10/02/07
10/02/07
CBI
CBI
P–07–0540
07/06/07
10/03/07
CBI
P–07–0541
P–07–0542
07/09/07
07/09/07
10/06/07
10/06/07
CBI
CBI
P–07–0543
07/09/07
10/06/07
CBI
P–07–0544
07/09/07
10/06/07
CBI
P–07–0545
07/09/07
10/06/07
CBI
P–07–0546
07/09/07
10/06/07
CBI
P–07–0547
07/09/07
10/06/07
CBI
P–07–0548
P–07–0549
07/09/07
07/09/07
10/06/07
10/06/07
CBI
Cytec Industries Inc.
P–07–0550
07/10/07
10/07/07
CBI
(S) Solder mask for printed circuit
board preparation
P–07–0551
07/10/07
10/07/07
CBI
(S) Solder mask for printed circuit
board preparation
P–07–0552
P–07–0553
07/09/07
07/10/07
10/06/07
10/07/07
07/11/07
10/08/07
CBI
J.M. Huber Corporation
CBI
(G) Open non dispersive (adhesive)
(S) Flame retardant
P–07–0554
P–07–0555
07/11/07
10/08/07
CBI
(G) Ink additive
P–07–0556
P–07–0557
P–07–0558
jlentini on PROD1PC65 with NOTICES
P–07–0532
07/11/07
07/16/07
06/29/07
10/08/07
10/13/07
09/26/07
Cytec Industries Inc.
CBI
CBI
P–07–0559
07/16/07
10/13/07
CBI
(G) Coating resin additive
(G) Industrial coating
(G) Coating resin for open, non-dispersive use
(G) Rubber production
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
(G) Water repellant additive
(G) For use as an exterior coating for
aluminum ‘‘easy open ends’’ for the
beer and bevearge can market
(G) Barrier film for plastic articles
Frm 00081
(G) Pigment dispersant
(G) Base material for industrial fluids
and lubricants
(G) Base material for industrial fluids
and lubricants
(G) Base material for industrial fluids
and lubricants
(G) Base material for industrial fluids
and lubricants
(G) Base material for industrial fluids
and lubricants
(G) Base material for industrial fluids
and lubricants
(G) Open non-dispersive (binder)
(G) Mining Chemical reagent
(G) Compressor lubricant
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
(G) Modified ethylene-vinyl alcohol
(evoh) polymer
(G) Polyurethane derivative
(G) Mixed polyol - gylcerol fatty acid
ester
(G) Mixed polyol - gylcerol fatty acid
ester
(G) Mixed polyol - gylcerol fatty acid
ester
(G) Mixed polyol - gylcerol fatty acid
ester
(G) Mixed polyol - gylcerol fatty acid
ester
(G) Mixed polyol - gylcerol fatty acid
ester
(G) Aliphatc polyurethane resin
(G) Substituted alkenoic acid, ester,
polymer
with
alkenamide,
hydrolyzed, metal salts
(G) 2-propenoic acid, 2-methyl-, polymer with 2-methyl-2-propenoate, a
modified hydroxy alkenyl ester, and
an aromatic alkenyl ester, 2propenoate, initiated
(G) Propanoic acid, 3-hydroxy-2(hydroxymethyl)-2-methyl-, polymer
with alkyl polyol, a cyloaliphatic
isocyanate and a modified alkyl
ester
(G) Polyurethane
(G) magnesium trihydrate surface
treated
(G) Fatty acid ester, alcohol alkoxylate
(G)
Phosphonium,
teraaryl-,
tetrakis(aryl)borate(1-)
(G) Substituted epoxy resin
(G) Urethane acrylate
(G) Acrylated polyester urethane
(G) Tetrakis(2-ethylhexyl)thiuram disulfide
22AUN1
47033
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Case No
Received
Date
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
(S) Industrial adhesive for automotive
industry; industrial adhesive for
construction industry; industrial adhesive for electronics industry
(G) An open, non-dispersive use
(G) Acrylate modified acrylonitrile,
gutadiene styrene polymer
07/17/07
10/14/07
Kaneka Texas Corporation
P–07–0561
07/17/07
10/14/07
CBI
P–07–0562
07/18/07
10/15/07
P–07–0563
07/23/07
10/20/07
P–07–0564
07/23/07
10/20/07
P–07–0565
07/23/07
10/20/07
Three Bond International, Inc.
Cogins Pleochemicals
LLC
Cogins Oleochemicals
LLC
CBI
P–07–0566
07/23/07
10/20/07
CBI
P–07–0567
07/23/07
10/20/07
CBI
P–07–0568
07/23/07
10/20/07
CBI
P–07–0569
07/24/07
10/21/07
Henkel Corporation
P–07–0570
07/24/07
10/21/07
CBI
(G) Barrier film for plastics articles
P–07–0571
07/24/07
10/21/07
CBI
P–07–0572
07/24/07
10/21/07
Lg Chem America,
Inc.
(G) Pigment additive for industrial
coatings and ink manufacture and
for plastics compounding
(S) Plasticiser in pvc molded products
P–07–0573
07/24/07
10/21/07
Colonial Chemical,
Inc.
(S) Hard surface cleaner in high
caustic solutions
P–07–0574
07/24/07
10/21/07
Colonial Chemical,
Inc.
(S) Hard surface cleaner in high
caustic solutions
P–07–0575
07/25/07
10/22/07
CBI
P–07–0576
07/25/07
10/22/07
Dupont Company
(S) Hotmelts for automotive industry;
hotmelts for the woodworking industry
(G) Polymer adhesive and article
P–07–0577
07/25/07
10/22/07
P–07–0578
07/26/07
10/23/07
Inolex Chemical Company
Inolex Chemical Company
(G) Reactant for polymers, open nondispersive use
(G) Reactant for polymers, open nondispersive use
P–07–0579
07/26/07
10/23/07
Degussa Corporation
(S) Organic pigment for printer toner
cartridges
P–07–0580
07/26/07
10/23/07
CBI
(G) Detergent component
P–07–0581
07/27/07
10/24/07
CBI
(G) Chelating resin
P–07–0582
jlentini on PROD1PC65 with NOTICES
P–07–0560
07/27/07
10/24/07
CBI
(G) Chelating resin
P–07–0583
07/27/07
10/24/07
CBI
P–07–0584
07/30/07
10/27/07
Genencor, a Danisco
Division
(G) Chromatographic separation material
(S) Textile chemical formulation (TCF)
of denim bleaching products; laundry denim bleaching and/or modification of the cast of denim
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Frm 00082
(G) Bolt coating adhesive (open, nondispersive use)
(S) Emulsifier for oil-mud drilling fluids
(G) Metal salt of styrene - acrylic copolymer
(G) 2,6-xylidine, 4,4′-methylenedi(G) Fatty acid maleic acid amide
(S) Emulsifier for oil-mud drilling fluids
(G) Fatty acid maleic acid amide
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Additive, open, non-dispersive
use
(G) Pigment additive for industrial
coatings and ink manufacture and
for plastics compounding
(S) A polymerizable component in industrial adhesive/sealant formulations
(G) Polyester polyether urethane
block copolymer
(G) Polyester polyether urethane
block copolymer
(G) Polyester polyether urethane
block copolymer
(G)
Naphthalenesulfonic
acid,
[(chloro-methyl-sulfophenyl)
diazenyl]-hydroxy-metal salt
(S) Siloxanes and silicones, di-me,
me
[(2-methyl-1-oxo-2-propen-1yl)oxy]methyl, [(methoxymethyl[[(2methyl-1-oxo-2-propen-1yl)oxy]methyl)silyl]oxy]-terminated
(G) Modified ethylene-vinyl alcohol
(evoh) polymer
(G)
[[[[(methoxyphenyl)amino]carbonyl]oxopropyl]diazenyl]-benzoic acid
(S) Hexanoic acid, 2-ethyl-, mixed
diesters
with
benzoic
acid
triethylene glycol
(S)
D-glucopyranose,
oligomeric,
decyl octyl glycosides, 2-hydroxy-3sulfopropyl ethers, sodium salts
(S)
D-glucopyranose,
oligomeric,
C10–16-alkyl glycosides, 2-hydroxy3-sulfopropyl ethers, sodium salts
(G) Polyester of alkanedioic acid and
alkanediol
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
(G)
Hexafluoropropylene-perfluoro
(alkyl
vinyl
ether)-tetrafluoroethylene copolymer
(G) Carbomonocyclic dicarboxylic
acid, polymer with 2,2′-oxybis
(G) Carbomonocyclic dicarboxylic
acid, polymer with 2-ethyl-2hydroxymethyl-1,3-propanediol and
1,6-hexanediol
(S)
Benzenamine,
homopolymer,
cyclized,
quaternized,
hydrochlorides sulfates
(G) Stilbene containing diaromatic
nitrile
(G) Iminodiacetic acid type chelating
resin
(G) Iminodiacetic acid type chelating
resin
(G) Special ligand type ion exchange
resin
(S)
4-hydroxy-3,5dimethoxybenzamide (syringamide)
22AUN1
47034
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
I. 193 PREMANUFACTURE NOTICES RECEIVED FROM: 04/27/07 TO 08/03/07—Continued
Received
Date
Case No
Projected
Notice
End Date
Manufacturer/Importer
P–07–0585
07/30/07
10/27/07
Genencor, a Danisco
Division
P–07–0586
07/31/07
10/28/07
Gelest, Inc.
P–07–0587
P–07–0588
P–07–0589
P–07–0590
P–07–0591
P–07–0592
P–07–0593
P–07–0594
P–07–0595
08/01/07
08/01/07
08/01/07
08/01/07
08/01/07
08/01/07
08/01/07
08/01/07
08/01/07
10/29/07
10/29/07
10/29/07
10/29/07
10/29/07
10/29/07
10/29/07
10/29/07
10/29/07
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
P–07–0596
07/30/07
10/27/07
Conocophillips
P–07–0597
08/01/07
10/29/07
CBI
P–07–0598
P–07–0599
P–07–0600
P–07–0601
08/01/07
08/01/07
08/01/07
08/02/07
10/29/07
10/29/07
10/29/07
10/30/07
CBI
3m
Cytec Industries Inc.
CBI
In Table II of this unit, EPA provides
the following information (to the extent
Use
Chemical
(S) Textile chemical formulation (TCF)
of denim bleaching products; laundry denim bleaching and/or modification of the cast of denim
(S) Automotive part coating; research
(G) Chemical intermediate
(G) Chemical intermediate
(G) Paint additive
(G) Paint additive
(G) Paint additive
(G) Paint additive
(G) Paint additive
(G) Chemical intermediate
(G) Enclosed destructive use as process reactant.
(S) Diesel fuel component/transportation fuel
(G) Contained use in energy production.
(G) Modifier for electronic material
(G) Production of polmers
(S) Hardener for water-thinable paints
(G) Refrigerant for mobile air conditioning
(S) Laccase
(S)
Silane,
dichlorodimethyl-,
homopolymer
(G) N,N-dialkylalkylamine
(G) Alkyl nitrile
(G) Substituted dibasic ester
(G) Substituted dibasic ester
(G) Substituted dibasic ester
(G) Substituted dibasic ester
(G) Substituted dibasic ester
(G) N,N,N-trialkylalkylamine chloride
(G) N,N,N-trialkyalkylamine acetate
(S) Distillates, hydrocracked tallow,
C9–20
(G) Polyacrylate salt
(G)
(G)
(G)
(G)
Carboxylated nitrile rubber
Aromatic acrylate monomer
Substituted epoxy resin
Hydrofluorolefin
that such information is not claimed as
CBI) on the TMEs received:
II. 7 TEST MARKETING EXEMPTION NOTICES RECEIVED FROM: 4/27/07 TO 08/03/07
Received
Date
Case No.
Projected
Notice
End Date
Manufacturer/Importer
Use
Chemical
T–07–0013
05/18/07
07/01/07
Cytec Industries Inc.
(S) Wetting agent for industrial coatings
T–07–0014
06/11/07
07/25/07
Cytec Industries Inc.
(G) Resin for paints and coatings
T–07–0015
06/18/07
08/01/07
Forbo Adhesives, LLC
(G) Hot melt adhesive
T–07–0016
07/09/07
08/22/07
Cytec Industries Inc.
(G) Mining Chemical reagent
T–07–0017
T–07–0018
07/12/07
07/27/07
08/25/07
09/09/07
(G) Coating resin additive
(G) Non dispersive use
T–07–0019
08/01/07
09/14/07
Cytec Industries Inc.
S.C. Johnson and
Son, Inc.
Cytec Industries Inc.
(G) Substituted heterocycle, polymer
with diisocyanate, substituted cyclic
diamine
and
substituted
heterocycle, alkyl ester
(G) Unsaturated alkylcarboxylic acid,
polymers with alkanedioic acid,
alkyl alcohols, alkylaldehyde, substituted
triazine,
substituted
carbomonocycle and urea
(G) Isocyanate functional polyester
urethane polymer
(G) Substituted alkenoic acid, ester,
polymer
with
alkenamide,
hydrolyzed, metal salts
(G) Substituted epoxy resin
(G) Hydrolyzed cellulosic ether
(S) Hardener for water-thinable paints
(G) Substituted epoxy resin
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the Notices of Commencement
to manufacture received:
jlentini on PROD1PC65 with NOTICES
III. 126 NOTICES OF COMMENCEMENT FROM: 4/27/07 TO 08/03/07
Case No.
J–07–0001
P–01–0147
VerDate Aug<31>2005
Received Date
05/09/07
06/12/07
16:26 Aug 21, 2007
Commencement
Notice End Date
05/03/07
06/10/07
Jkt 211001
PO 00000
Chemical
(G) T. Reesei strain
(G) Epoxylated nitrile rubber
Frm 00083
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
22AUN1
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
47035
III. 126 NOTICES OF COMMENCEMENT FROM: 4/27/07 TO 08/03/07—Continued
Case No.
Received Date
Commencement
Notice End Date
05/25/07
05/25/07
07/11/07
07/19/07
06/12/07
07/16/07
07/31/07
04/27/07
07/18/07
07/18/07
05/11/07
07/09/07
05/25/07
06/19/07
06/07/07
05/11/07
05/11/07
06/14/07
06/29/07
05/30/07
06/26/07
07/06/07
04/19/07
07/10/07
07/10/07
12/07/05
07/03/07
05/15/07
06/11/07
05/17/07
P–05–0158
P–05–0212
P–05–0251
P–05–0264
P–05–0418
06/19/07
05/01/07
06/07/07
07/27/07
05/22/07
05/05/07
04/19/07
05/15/07
07/13/07
05/04/07
P–05–0458
P–05–0756
P–05–0791
P–06–0026
P–06–0121
P–06–0128
P–06–0239
P–06–0367
P–06–0453
P–06–0454
P–06–0455
P–06–0528
P–06–0556
P–06–0557
P–06–0558
P–06–0586
P–06–0603
P–06–0610
P–06–0613
05/07/07
05/22/07
06/26/07
07/20/07
07/23/07
06/11/07
04/30/07
05/02/07
07/02/07
05/29/07
05/29/07
07/23/07
06/29/07
06/29/07
06/29/07
07/26/07
05/29/07
06/11/07
05/23/07
04/04/07
05/02/07
05/23/07
06/29/07
06/20/07
05/31/07
03/25/07
04/02/07
06/23/07
08/02/06
08/02/06
07/13/07
06/15/07
06/12/07
06/08/07
06/20/07
10/12/06
05/31/07
04/20/07
P–06–0622
P–06–0635
P–06–0659
P–06–0660
P–06–0689
07/16/07
05/23/07
06/11/07
06/11/07
05/18/07
07/10/07
04/09/07
05/11/07
05/11/07
05/02/07
P–06–0693
P–06–0707
07/18/07
07/12/07
07/02/07
05/25/07
P–06–0747
P–06–0754
P–06–0771
P–06–0775
P–06–0791
P–06–0798
jlentini on PROD1PC65 with NOTICES
P–01–0405
P–01–0406
P–02–0135
P–03–0373
P–03–0522
P–03–0576
P–04–0010
P–04–0132
P–04–0174
P–04–0176
P–04–0547
P–04–0883
P–04–0949
P–05–0043
P–05–0067
07/17/07
06/06/07
07/09/07
07/09/07
06/11/07
06/11/07
06/25/07
05/30/07
06/06/07
06/20/07
06/04/07
06/01/07
P–06–0809
P–06–0811
P–07–0024
P–07–0051
P–07–0052
05/09/07
06/08/07
06/19/07
06/06/07
05/09/07
04/18/07
05/17/07
05/27/07
05/29/07
04/23/07
P–07–0053
P–07–0054
06/14/07
06/12/07
06/07/07
05/10/07
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Chemical
(G) Saccharide
(G) Saccharide
(S) 2(1H)-pyrimidinone, tetrahydro-1,3-dimethyl(G) Poluyurea isocyanate prepolymer
(G) Octa-alkyl ethylenediamine tetraacetamide
(G) Styrenated hydrocarbon resin, hydrogenated
(G) Salicylic acid compound
(G) Ethylhexyl oxetane
(G) Fluoroacrylate modified urethane
(G) Fluorinated oligomer alcohol
(G) Epoxy monomer
(G) Quaternary amino modified silicone-polyether copolymer
(G) Organic acids aluminum complexes
(G) Copper phthalocyanine sulfonic acid salt
(G) Fatty acids dimers, polymer with alkoxylated phenol, hydroxy ester acrylate,
cyclohexyl isocyanate and cyclic carboxylic acid
(G) Ammonium-functional methacrylate-styrene copolymer
(G) Maleic acid, sodium allyl sulphonate copolymer sodium salt
(G) Hydroxy aromatics, polymer with fluorinated aromatics
(G) Amine functional epoxy resin salted with organic acid
(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino) tris-, compound with
2-aminoethanol
(G) Polyetherimide made using substituted phthalic anhydride and diamine
(G) Polypiperidinamino derivative
(G) Quaternary copolymer
(G) Aromatic urethane acrylate oligomer
(G) Modified acrylonitrile-butadiene polymer
(G) Iron-based organic complex
(G) Emulsified waterborn polyamine hardner
(G) Fluoroelastomer
(G) Modified polylolefin
(G) Modified phenol resin
(G) Modified phenol resin
(S) Fatty acids, coco, hydrogenated, methyl-2-sulfoethyl esters, sodium salts
(G) Polyoxyalkylenesilane
(G) Silane hydride
(G) Chlorosilane
(G) Fluoroalkyl methacrylate copolymer
(G) Alkylether alkenoate
(G) Dimethyl terephthalate alkanediol copolymer
(S) 1H-3H-benzo[1,2-C:4,5-C′]difuran-1,3,5,7-tetrone, polymer with 5,5′carbonylbis[1,3-isobenzofurandione], 1,3-diisocyanatomethylbenzene and
4,4′-oxybis[benzenamine]
(S) 1,2-ethanediol, monocarbamate
(S) 6,10-dodecadien-1-ol, 3,7,11-trimethyl(G) Macrocyclic lactone derivative salt
(G) Macrocyclic lactone derivative
(G) Alkyl amino substituted triazine amino substituted benzenesulfonic acid reaction product with naphthalenesulfonato azo substituted phenyl azo substituted benzenedisulfonic acid copper compound
(G) Alkyl dimethyl betaine
(G)
Alkanoic
acid,
hydroxy-,
compd
with
[[[[(alkylamino)alkyl]amino]heterocycle][(hydro-oxobenzimidazolyl)azo]hydroxy-carbopolycyclesulfonic acid
(G) [N-(alkylbenzyl)-N,N-dimethylanilinium] [(halomethylsulfonyl)imide)]
(G) Propylene glycol mono fatty acid ester
(G) Fatty acids, methyl esters, hydroformylation products
(G) Fatty acids methyl esters hydroformylation products, hydrogenated
(G) Polyamide
(G) Substituted alkenoic acid, polymer with substituted carbomonocycle,
alkenoate, alkenoic acid and substituted polycycle, peroxide-initiated
(G) Amine modified acrylic ester
(G) Substituted bicyclic olefin
(G) Alkylamine ethoxylated
(G) Polyethylene glycol ether acid
(G) Benzenesulfonic acid azo benzenesulfonic acid azo substituted
naphthalenesulfonic acid amino substituted triazine amino substituted phenyl
sulfonyl compound
(G) Oils, watermelon, citrullus lanatus
(S) Hexanedioic acid, polymer with 1,3-diisocyanatomethylbenzene and 3-methyl-1,5-pentanediol, propylene gylcol monomethacrylate-blocked
Frm 00084
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
22AUN1
47036
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
III. 126 NOTICES OF COMMENCEMENT FROM: 4/27/07 TO 08/03/07—Continued
Case No.
Received Date
Commencement
Notice End Date
05/25/07
05/22/07
P–07–0056
P–07–0065
P–07–0075
P–07–0102
05/03/07
07/06/07
05/16/07
05/18/07
04/10/07
06/28/07
04/20/07
05/02/07
P–07–0103
05/01/07
04/13/07
P–07–0108
P–07–0117
P–07–0133
P–07–0134
P–07–0135
P–07–0136
P–07–0137
P–07–0139
P–07–0141
P–07–0149
05/08/07
05/30/07
06/07/07
06/07/07
06/07/07
06/07/07
06/07/07
06/04/07
05/07/07
05/07/07
04/15/07
05/25/07
05/17/07
05/17/07
05/17/07
05/17/07
05/17/07
05/24/07
04/02/07
04/24/07
P–07–0159
P–07–0163
05/09/07
05/07/07
04/17/07
04/30/07
P–07–0164
06/20/07
06/15/07
P–07–0166
P–07–0167
06/11/07
07/25/07
05/28/07
07/12/07
P–07–0169
P–07–0183
P–07–0188
P–07–0190
P–07–0192
P–07–0193
P–07–0194
P–07–0198
P–07–0199
07/03/07
07/09/07
07/09/07
05/04/07
05/30/07
05/11/07
05/07/07
07/25/07
05/15/07
06/24/07
06/04/07
06/04/07
04/27/07
05/23/07
05/08/07
04/22/07
06/29/07
05/09/07
P–07–0200
06/26/07
05/29/07
P–07–0202
P–07–0203
P–07–0205
P–07–0218
P–07–0226
07/05/07
07/05/07
05/29/07
05/21/07
07/25/07
06/14/07
06/18/07
05/21/07
05/07/07
06/22/07
P–07–0227
P–07–0229
P–07–0232
P–07–0235
06/29/07
07/05/07
06/15/07
06/06/07
06/25/07
06/08/07
05/10/07
05/30/07
P–07–0236
P–07–0247
P–07–0254
P–07–0255
P–07–0256
jlentini on PROD1PC65 with NOTICES
P–07–0055
06/18/07
05/31/07
05/22/07
06/05/07
07/25/07
05/15/07
05/22/07
05/16/07
05/24/07
06/21/07
P–07–0259
P–07–0262
P–07–0263
P–07–0264
05/30/07
06/04/07
06/11/07
06/12/07
05/24/07
05/23/07
05/28/07
05/30/07
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
PO 00000
Chemical
(G) 2-(dimethylamino)ethyl methyl-2-propanoate, polymer with alkyl-substituted
methyl-2-propanoate and aryl-substituted methyl-2-propanoate, salt with
mono(alkyl-substituted polyalkoxyether)butanedioates and alkyl-substituted
polyalkoxyether phosphate
(G) Modified polyacrylate block polymer
(G) Isocyanate terminated urethane polymer
(G) Acrylic polymer with vinyl compound, salt
(G) Substituted phenyl amino substituted triazine reaction product with
naphthalenesulfonic acid azo naphthalenesulfonic acid amino substituted triazine amino alkyl compound
(G) Substituted benzene sulfonic acid, salt reaction product with phenylamine
and amino alcohol and substituted propaneamide compounds with amino alcohol
(G) 1,1-diacidsubstituted -4-aminobutanol, monosodium salt
(G) Acrylated aliphatic polyurethane
(G) Polymer with carboxylic acid ester
(G) Isocyanate compound with polyurethane polyol (provisional)
(G) Polymer with carboxylic acid ester
(G) Polymer with carboxylic acid ester
(G) Polymer with carboxylic acid ester
(G) Ether alkanol
(G) Succinoyl phenylhydrazide
(S) 1,4-cyclohexanedicarboxylic acid, polymer with 1,4-cyclohexanedimethanol
and 2,5-furandione, reaction products with glycidyl neodecanoate and polyethylene-polypropylene glycol 2-aminopropyl me ether
(G) Perfluoropolyether compound
(G) Fatty acids, C18-unsatd., dimers, polymers with bisphenol A, polyalkylene
glycol diglycidyl ether and alkylene oxide
(G) Substituted phenyl amino substituted triazine reaction product with
naphthalenesulfonic
acid
azo
substituted
phenyl
substituted
naphthalenesulfonic acid amino compound
(G) Polester acrylate resin
(G) Substituted carbomonocycles, polymer with substituted glycols and
alkyldioic acid
(G) Isocyanate-functional polyurethane
(G) Sma ester
(G) Sma ester ammonium salt solution
(G) Methyl methacrylate, acrylate copolymer
(G) Polyethyleneimine polyester copolymer
(G) Formaldehyde, polymer with substituted carbomonocycles, alkyl ether
(G) Polyalkoxylated aromatic colorant
(G) Surface modified ceramic particles
(G) Alkenoic acid alkyl esters, polymer with substituted carbomonocycle, substituted epoxy alkyl ester compound with substituted amine
(S) Ethanaminium, 2-hydroxy-N,N-bis (2-hydroxyethyl)-N-methyl-, esters with
C12–20 fatty acids, me sulfates (salts)
(G) Fluorinated alcohol
(G) Fluorinated alkenyl ether
(G) Branched alkylamide, N-ethylhexyl
(S) 3-cyclooctene-1-methanol, .alpha.-ethyl(G) Mono-me ether blocked methylenediphenyl diisocyanate polyurethane polymer with polyoxypropylene diamine
(G) Polyethyleneglycol diacrylate, modified
(G) Sulfonated copolyester
(G) Polyester copolymer
(G) Tri-(substituted azo benzenesulfonic acid)- M- phelylenediamine, sodium
salts
(G) menthyl methyl ether
(G) Fatty acid modified polyester resin
(G) Organosilane derivative
(G) Phosphoric acid, alkylester, compound with morpholine
(G) Mono-me ether blocked methylenediphenyl diisocyanate polyurethane polymer
(G) Silicone polyether copolymer
(G) Linolal
(G) Bis[(substituted)phenyl]-dihydro-pyrrolo[substituted]pyrrole-dione
(G) Isocyanic acid, polymethylenepolyphenylene ester, polymer with
(chloromethyl)oxirane,
4,4′-(1-methylethylidene)bis[phenol]
and
.alpha.,.alpha.′-[(1-methylethylidene)di-4,1-phenylene]bis[.omega.hydropoly(oxy-1,2-ethanediyl)], 2-ethylhexanoate, reaction products substituted ethanols and diethylenetriamine
Frm 00085
Fmt 4703
Sfmt 4703
E:\FR\FM\22AUN1.SGM
22AUN1
Federal Register / Vol. 72, No. 162 / Wednesday, August 22, 2007 / Notices
47037
III. 126 NOTICES OF COMMENCEMENT FROM: 4/27/07 TO 08/03/07—Continued
Case No.
Commencement
Notice End Date
Received Date
P–07–0269
P–07–0270
P–07–0271
P–07–0284
P–07–0295
P–07–0302
P–07–0305
P–07–0319
P–07–0326
P–07–0330
P–07–0360
P–07–0368
P–07–0375
P–07–0396
07/18/07
06/11/07
06/11/07
06/19/07
07/25/07
07/16/07
07/05/07
07/23/07
07/23/07
07/25/07
07/17/07
07/31/07
07/19/07
07/30/07
06/14/07
05/29/07
05/29/07
06/06/07
07/17/07
06/18/07
06/21/07
06/26/07
07/11/07
07/03/07
07/09/07
07/23/07
07/13/07
07/25/07
P–92–1370
P–94–0594
P–95–1644
07/25/07
07/18/07
06/29/07
06/25/07
05/31/94
06/21/07
List of Subjects
Environmental protection, Chemicals,
Premanufacturer notices.
Dated: August 9, 2007.
Todd S. Holderman,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. E7–16318 Filed 8–21–07; 8:45 am]
BILLING CODE 6560–50–S
FEDERAL COMMUNICATIONS
COMMISSION
Notice of Public Information
Collection(s) Being Submitted for
Review to the Office of Management
and Budget
jlentini on PROD1PC65 with NOTICES
July 25, 2007.
SUMMARY: The Federal Communications
Commission, as part of its continuing
effort to reduce paperwork burden
invites the general public and other
Federal agencies to take this
opportunity to comment on the
following information collection(s), as
required by the Paperwork Reduction
Act (PRA) of 1995, Public Law 104–13.
An agency may not conduct or sponsor
a collection of information unless it
displays a currently valid control
number. No person shall be subject to
any penalty for failing to comply with
a collection of information subject to the
Paperwork Reduction Act (PRA) that
does not display a valid control number.
Comments are requested concerning (a)
Whether the proposed collection of
VerDate Aug<31>2005
16:26 Aug 21, 2007
Jkt 211001
Chemical
(G) Phosphoramidic acid, carbomonocyclic-,diphenylester
(G) Polyesterurethane resin
(G) Polyurethanesilicone resin
(G) Alkyl silicone resin
(G) Fatty acid polymer with aliphatic diol and aromatic diacid
(G) Polyester resin
(G) Dicarboxylic acid, aminoalkanoic acid and polyether copolymer
(G) Alkylaminoalcohol
(G) Polyurethane
(G) Surface modified ceramic materials and wares, chemicals
(G) Phytase
(G) Phenol, substituted-, polymer with substituted oxirane and substituted thiol
(G) Aluminum trihydrate surface treated
(S)
1,3-propanediaminium,
2-hydroxy-N,N′-bis(2-hydroxyethyl)-N,N,N′,N′tetramethyl-, dichloride
(G) Polymer of alkylene oxides, alkyl dicarboxylic acid, and alkyliminobisethanol
(S) Phenol, 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)(S)
A
binary
mixture
of
impurities:
2,9,11,13,15,22,24,26,27,28decaazatricyclo[21.3.1.1(10,14)]octacosa-1(27),10,12,14(28),23,25-hexaene12,25-diamine,
N,N′-bis(1,1,3,3-tetramethylbutyl)-2,9,15,22-tetrakis(2,2,6,6tetramethyl-4-piperidinyl)-(9ci);2,9,11,13,14-pentaazabicyclo[8.3.1]tetradeca1(14),10,12-trien-12-amine,
N-(1,1,3,3-tetramethylbutyl)-2,9-bis(2,2,6,6tetramethyl-4-piperidinyl)-(9ci)
information is necessary for the proper
performance of the functions of the
Commission, including whether the
information shall have practical utility;
(b) the accuracy of the Commission’s
burden estimate; (c) ways to enhance
the quality, utility, and clarity of the
information collected; and (d) ways to
minimize the burden of the collection of
information on the respondents,
including the use of automated
collection techniques or other forms of
information technology.
DATES: Written Paperwork Reduction
Act (PRA) comments should be
submitted on or before September 21,
2007. If you anticipate that you will be
submitting PRA comments, but find it
difficult to do so within the period of
time allowed by this notice, you should
advise the FCC contact listed below as
soon as possible.
ADDRESSES: Direct all PRA comments to
Jasmeet K. Seehra, Office of
Management and Budget, Room 10236
NEOB, Washington, DC 20503, (202)
395–3123, or via fax at 202–395–5167 or
via Internet at
Jasmeet_K._Seehra@omb.eop.gov and to
Judith-B.Herman@fcc.gov, Federal
Communications Commission, Room 1–
B441, 445 12th Street, SW., DC 20554 or
an e-mail to PRA@fcc.gov. If you would
like to obtain or view a copy of this
information collection, you may do so
by visiting the FCC PRA Web page at:
https://www.fcc.gov/omd/pra.
FOR FURTHER INFORMATION CONTACT: For
additional information or copies of the
information collection(s), contact Judith
PO 00000
Frm 00086
Fmt 4703
Sfmt 4703
B. Herman at 202–418–0214 or via the
Internet at Judith-B.Herman@fcc.gov.
SUPPLEMENTARY INFORMATION: OMB
Control Number: 3060–0779.
Title: Amendment of Part 90 of the
Commission’s Rules to Provide for Use
of the 220 MHz Band by the Private
Land Mobile Radio Service (PLMRS), PR
Docket No. 89–552.
Form No.: N/A.
Type of Review: Revision of a
currently approved collection.
Respondents: Business or other forprofit, not-for-profit institutions, and
state, local or tribal government.
Number of Respondents: 2,313
respondents; 2,313 responses.
Estimated Time Per Response: 2–20
hours.
Frequency of Response: On occasion
reporting requirement and third party
disclosure requirement.
Obligation to Respond: Required to
obtain or retain benefits.
Total Annual Burden: 23,433 hours.
Total Annual Cost: $430,600.
Privacy Act Impact Assessment: N/A.
Nature and Extent of Confidentiality:
There is a need for confidentiality.
Needs and Uses: The Commission
will submit this information collection
to OMB as a revision during this
comment period to obtain the full threeyear clearance from them. The
Commission is reporting a decrease in
the total annual burden hours and
annual costs because some of the rules
are no longer applicable because Phase
I licenses are no longer issued. In other
respects, some areas of this collection
are nil pending the potential influx of
E:\FR\FM\22AUN1.SGM
22AUN1
]]>Agencies
[Federal Register Volume 72, Number 162 (Wednesday, August 22, 2007)]
[Notices]
[Pages 47026-47037]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-16318]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
EPA-HQ-OPPT-2007-0817; FRL-8144-7
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from April 29, 2007 to August 3, 2007, consists of the PMNs and
TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before September 21, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2007-0817, by one of the following methods.
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2007-0817. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2007-0817. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
https://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through https://
regulations.gov your e-mail address will be automatically captured and
included as part of the comment that is placed in the public docket and
made available on the Internet. If you submit an electronic comment,
EPA recommends that you include your name and other contact information
in the body of your comment and with any disk or CD ROM you submit. If
EPA cannot read your comment due to technical difficulties and cannot
contact you for clarification, EPA may not be able to consider your
comment. Electronic files should avoid the use of special characters,
any form of encryption, and be free of any defects or viruses. For
additional information about EPA's public docket, visit the EPA Docket
Center homepage at https://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket's
index available in regulations.gov. To access the electronic docket, go
to https://www.regulations.gov, select ``Advanced Search,'' then
``Docket Search.'' Insert the docket ID number where indicated and
select the ``Submit'' button. Follow the instructions on the
regulations.gov web site to view the docket index or access available
documents. Although listed in the index, some information is not
publicly available, e.g., Confidential Business Information (CBI) or
other information whose disclosure is restricted by statute. Certain
other material, such as copyrighted material, will be publicly
available only in hard copy. Publicly available docket materials are
available electronically at https://www.regulations.gov, or, if only
available in hard copy, at the OPPT Docket. The OPPT Docket is located
in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington, DC. The EPA/DC PublicReading Room
hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding Federal holidays. The telephone numberof the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. Docket visitors are required to show
photographic identification, pass through a metal detector, and sign
the EPA visitor log. All visitor bags are processed through an X-ray
machine and subject to search. Visitors will be provided an EPA/DC
badge that must be visible at all times in the building and returned
upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is
[[Page 47027]]
claimed CBI). In addition to one complete version of the comment that
includes information claimed as CBI, a copy of the comment that does
not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from April 29, 2007 to August 3, 2007,
consists of the PMNs and TMEs, both pending or expired, and the notices
of commencement to manufacture a new chemical that the Agency has
received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 193 Premanufacture Notices Received From: 04/27/07 to 08/03/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-07-0410 04/30/07 07/28/07 CBI (G) Intermediate (G) Laureth maleate
P-07-0411 05/01/07 07/29/07 CBI (G) Open non- (G) Mdi prepolymer
dispersive
(elastomer)
P-07-0412 05/01/07 07/29/07 Nippon Gohsei USA (G) Ink additive (G) 2-propenoic acid,
Company, Ltd. 2- methyl-, polymer
with 2-ethylhexyl 2-
propenoate, methyl 2-
methyl-2-propanoate,
substituted-1-
propanesulfonic acid
and 2-methyl-2-
propenamide
P-07-0413 05/02/07 07/30/07 Boulder Scientific (S) Chemical (S) Phenol, 2-bromo-4-
Company intermediate methyl-
P-07-0414 05/02/07 07/30/07 CBI (G) Catalyst (G) Alkyl heteroalkyl
intermediate chloride
P-07-0415 05/02/07 07/30/07 Dover Chemical (S) Lubricant (S) Soybean oil,
Corporation additive used in nitrated
industrial
lubricants and
metalworking fluids
P-07-0416 05/03/07 07/31/07 CBI (G) Fabric (G) Aziridine
performance homopolymer
treatment derivative
P-07-0417 05/04/07 08/01/07 Plextronics, Inc. (S) For use as a (G) Modified
component in inks thiophene polymer
that will function
as an active layer
in printed
electronic devices
P-07-0418 05/04/07 08/01/07 CBI (G) Synthetic (G) Hydrogenated
lubricant base stock polyalphaolefins
P-07-0419 05/04/07 08/01/07 CBI (G) Synthetic (G) Hydrogenated
lubricant base stock polyalphaolefins
P-07-0420 05/04/07 08/01/07 CBI (G) Synthetic (G) Hydrogenated
lubricant base stock polyalphaolefins
P-07-0421 05/04/07 08/01/07 CBI (G) Synthetic (G) Hydrogenated
lubricant base stock polyalphaolefins
P-07-0422 05/04/07 08/01/07 CBI (S) Waterborne (G) Phenol, 4,4'-(1-
flooring methylethylidene)bis-
applications; , polymer with 2-
waterborne epoxy (chloromethyl)oxiran
coatings e and a polyol,
reaction products
with 5-amino-1,3,3-
trimethylcyclohexane
methanamine
derivatives, an
aromatic alkyl amine
and an alkyl amine
P-07-0423 05/04/07 08/01/07 CBI (G) Component of (G) Acrylic polymer
paint with styrene and
polyethylene glycol
methyl ether
methacrylate
P-07-0424 05/04/07 08/01/07 CBI (G) Component of (G) Acrylic polymer
adhesive with vinyl acetate
and acrylonitrile
P-07-0425 05/07/07 08/04/07 CBI (G) Open non- (G) Mdi polyether
dispersive (resin) prepolymer
[[Page 47028]]
P-07-0426 05/07/07 08/04/07 CBI (G) Open non- (G) Mdi polyester
dispersive (resin) prepolymer
P-07-0427 05/07/07 08/04/07 CBI (G) Open non- (G) Mdi polyester
dispersive (resin) prepolymer
P-07-0428 05/07/07 08/04/07 Boulder Scientific (S) Catalytic (S) 1,2-
Company reaction component cyclohexanediamine,
(1r,2r)-rel-
P-07-0429 05/07/07 08/04/07 CBI (G) Additive for (G) Substituted
water-soluble ink. propenoic acid
polymer with
substituted
bisethanol and
substituted
cyclohexane
P-07-0430 05/08/07 08/05/07 The Dow Chemical (G) Component of (G) Brominated epoxy
Company electrical laminates novolac
P-07-0431 05/04/07 08/01/07 CBI (G) Polyester fiber (G) Ncs 1: Modified
polyethylene
terephthalate
P-07-0432 05/04/07 08/01/07 CBI (G) Polyester fiber (G) Ncs 2: Modified
polyethylene
terephthalate
P-07-0433 05/08/07 08/05/07 CBI (G) Catalyst (G) Alkyl heteroaryl
chloroaluminate
P-07-0434 05/09/07 08/06/07 Ticona (G) Non-woven (G) Copolymer of 2,6-
naphthalenedicarboxy
lic acid dialkyl
ester and alkylene
diol
P-07-0435 05/11/07 08/08/07 CBI (G) Coating resin for (G) Copolymer of
open, non-dispersive acrylic acrylates,
use methacrylates and
acid
P-07-0436 05/11/07 08/08/07 CBI (S) Solder mask for (G) 2-propenoic acid,
printed circuit 2-methyl-,
board preparation oxiranylmethyl
ester, polymer with
3-hydroxy-2-
(hydroxymethyl)-2-
methylpropanoic
acid, an alkyl
polyol and an
aliphatic isocyanate
P-07-0437 05/11/07 08/08/07 CBI (G) Defoamer (G) Siloxanes and
silicones, di-alkyl,
chlorine-terminated,
polymers with 2-
ethylhexyl acrylate-
polyoxyalkylene
glycol reaction
products,
polyoxyalkylene
glycol mono-alkyl
ether-terminated
P-07-0438 05/11/07 08/08/07 CBI (G) Polyol component (G) Polyester polyol
in polyester resin
synthesis -
destructive use
P-07-0439 05/11/07 08/08/07 CBI (G) Dispersant (G) Polycarboxylate,
modified sodium salt
P-07-0440 05/14/07 08/11/07 CBI (S) Alkylamino (G) Alkylamino
zirconium salt used zirconium salt
in Chemical vapor
deposition methods
during the
manufacture or
processing of
semiconductors
P-07-0441 05/15/07 08/12/07 CBI (G) Chemical (G) Glycerides, alkyl
manufacturing
intermediate
P-07-0442 05/15/07 08/12/07 CBI (G) Coating raw (G) Alkenoic acid,
material hydroxyalkyl ester,
polymer with alkyl
diisocyanate
P-07-0443 05/15/07 08/12/07 CBI (G) Dispersant for (G) Methacrylate
inorganic materials copolymer with
phosphinicobis
methacrylate and 2-
(phosphonooxy) ethyl
2-methyl-2-
propenoate, sodium
salt,
peroxydisulfuric
acid ([ho)s(o)2]2o2)
diammonium salt-
initiated
P-07-0444 05/16/07 08/13/07 CBI (S) Compatibilizer (G) Surface modified
for flame retardant aluminum hydroxide
for plastics
P-07-0445 05/17/07 08/14/07 CBI (G) Tile surface (G) Fluoroalkyl
treatment methacrylate
copolymer
P-07-0446 05/17/07 08/14/07 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-07-0447 05/17/07 08/14/07 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-07-0448 05/18/07 08/15/07 CBI (G) Reactant in (G) Secondary amine
thermoset coating; adduct
degree of
containment - (c)
open, non-dispersive
use
P-07-0449 05/18/07 08/15/07 Cytec Industries Inc. (S) Wetting agent for (G) Substituted
industrial coatings heterocycle, polymer
with diisocyanate,
substituted cyclic
diamine and
substituted
heterocycle, alkyl
ester
P-07-0450 05/18/07 08/15/07 Vitech International (S) Organic salt for (G) Urea, salt
Inc. dissolving inorganic
salts
P-07-0451 05/21/07 08/18/07 CBI (G) Polyol component (G) Polyester polyol
in polyester resin
synthesis -
destructive use
P-07-0452 05/22/07 08/19/07 CBI (G) Coatings and inks (G) Acrylate ester
P-07-0453 05/22/07 08/19/07 CBI (G) An open non- (G) Halide salt of an
dispersive use alkylamine
P-07-0454 05/22/07 08/19/07 CBI (G) An open non- (G) Alkyl amine
dispersive use
[[Page 47029]]
P-07-0455 05/22/07 08/19/07 CBI (G) An open non- (G) Alkyl amidoamine
dispersive use
P-07-0456 05/22/07 08/19/07 CBI (G) An open non- (G) Alkylamine
dispersive use
P-07-0457 05/24/07 08/21/07 CBI (G) Industrial ink (G) Maleic modified
additive soybean oil alkyd
P-07-0458 05/24/07 08/21/07 CBI (G) Thermoset resin (G) Bismaleimide
resin
P-07-0459 05/24/07 08/21/07 Huntsman (S) Moisture (G) Quarternized
International, LLC management agent for polyether modified
cotton and synthetic aminomodified
fabrics substituted
polysiloxane
P-07-0460 05/25/07 08/22/07 CBI (G) Monomer (G) Polyoxyethylene
alkyl ether
phosphate
P-07-0461 05/25/07 08/22/07 CBI (G) Quality control (G) Derivative of a
additive salt of a polymer of
styrene, substituted
methacrylic acid and
an alkyl acrylate
P-07-0462 05/29/07 08/26/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
P-07-0463 05/29/07 08/26/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
P-07-0464 05/29/07 08/26/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
P-07-0465 05/30/07 08/27/07 Byk-Chemie USA Inc. (S) Additive for (G) Siloxanes coated
coatings alumina
nanoparticles
P-07-0466 05/30/07 08/27/07 Byk-chemie USA Inc. (S) Additive for (G) Siloxane coated
coatings silica nanoparticles
P-07-0467 05/30/07 08/27/07 CBI (G) Corrosion (G) Reaction product
inhibitor for of a substituted
oilfield use pyridine,
paraformaldehyde,
hydrochloric acid,
and an alkylamine
P-07-0468 05/30/07 08/27/07 The Dow Chemical (G) Component of (G) Brominated epoxy
Company electrical laminates novolac
P-07-0469 05/24/07 08/21/07 J.M. Huber (S) Flame retardant (G) Magnesium
Corporation hydroxide surface
treated
P-07-0470 05/31/07 08/28/07 CBI (G) Cosolvent (G) Alkyl cycloether
P-07-0471 06/01/07 08/29/07 CBI (G) Use: Spray- (G) Carbomonocylic
applied paint; dicarboxylic acid
degree of polymer containing
containment: Open, trimethyl
non-dispersive substituted alkane
diol and 1,6-
hexanediol
P-07-0472 06/01/07 08/29/07 GE water and process (G) Industrial (G) Amphoteric
technologies primary wastewater acrylic polymer
clarification
treatment,
coagulants, open,
non-disperse
P-07-0473 06/01/07 08/29/07 CBI (S) Binder for wood (G) Dimer fatty acid
floor lacquers based polyester
polyurethane
P-07-0474 06/04/07 09/01/07 Eastman Chemical (S) Molded plastic (G) Modified
Company parts; extruded copolyester
sheeting
P-07-0475 05/31/07 08/28/07 Huntsman Corporation (S) Liquid soap (S) Decanoic acid,
methyl-2-sulfoethyl
ester, sodium salt
(1:1)
P-07-0476 05/31/07 08/28/07 Huntsman Corporation (S) Liquid soap (S) Dodecanoic acid,
methyl-2-sulfoethyl
ester, sodium salt
(1:1)
P-07-0477 05/31/07 08/28/07 Huntsman Corporation (S) Liquid soap (S) Tetradecanoic
acid, methyl-2-
sulfoethyl ester,
sodium salt (1:1)
P-07-0478 05/31/07 08/28/07 Huntsman Corporation (S) Liquid soap (S) Hexadecanoic
acid, methyl-2-
sulfoethyl ester,
sodium salt (1:1)
P-07-0479 05/31/07 08/28/07 Huntsman Corporation (S) Liquid soap (S) Fatty acids,
C10 16, methyl-2-
sulfoethyl esters,
sodium salts
P-07-0480 06/04/07 09/01/07 Cytec Industries Inc. (G) Crosslinking (G) Alkylated
resin glycoluril
formaldehyde resin
P-07-0481 06/05/07 09/02/07 CBI (G) Ink additive (G) Phosphonium,
tetraaryl-,
tetrakis(aryl)borate
(1-)
P-07-0482 06/05/07 09/02/07 CBI (G) Lubricant (G) Pentaerythritol
formulation for cocoate
textile fiber
processing.
P-07-0483 06/05/07 09/02/07 CBI (G) Ink additive (G) Urethane polymer
methacrylate-blocked
P-07-0484 06/07/07 09/04/07 CBI (G) Specialty polyol (G) Mixed glycol
for in-house adipate polyester
manufacturing polyol
P-07-0485 05/30/07 08/27/07 Fibro Chem LLC (S) Odor control (S) Siloxanes and
agent for soft and silicones, di-me, 3-
hard surfaces hydroxypropyl me,
ethers with
polyethylene glycol
mono(hydrogen
succinate), zinc
salts
P-07-0486 06/08/07 09/05/07 CBI (G) Emulsifier and (G) Copolymer of
dispersant alkenyl
[[Page 47030]]
P-07-0487 06/11/07 09/08/07 Cytec Industries Inc. (G) Resin for paints (G) Unsaturated
and coatings alkylcarboxylic
acid, polymers with
alkanedioic acid,
alkyl alcohols,
alkylaldehyde,
substituted
triazine,
substituted
carbomonocycle and
urea
P-07-0488 06/12/07 09/09/07 CBI (G) Open, non- (G) Pvb derivative
dispersive use
P-07-0489 06/11/07 09/08/07 CBI (G) Additive, open, (G) Salt of
non-dispersive use alkylolaminoamid and
ethoxylated
alcohols, phosphates
P-07-0490 06/11/07 09/08/07 Sasol North America (S) Alcohol (S) 1-octanol,
Inc. derivatives - used manufacture of,
alone or blended distn. lights
with other alcohols
as feedstock for
derivation (i.e.
ethoxylation,
propoxylation,
sulfation,
sulfonation,
esterification
etc.); mining
flotation aid-direct
substitute for
hexanol, octanol or
decanol PMN
substance A and B;
metal rolling
lubricant - direct
sustitute for
hexanol, octanol or
decanol PMN
substance A and B
P-07-0491 06/11/07 09/08/07 Sasol North America (S) Alcohol (S) 1-decanol,
Inc. derivatives - used manufacture of,
alone or blended distn. lights.
with other alcohols
as feedstock for
derivation (i.e.
ethoxylation,
propoxylation,
sulfation,
sulfonation,
esterification
etc.); mining
flotation aid-direct
substitute for
hexanol, octanol or
decanol PMN
substance A and B;
metal rolling
lubricant - direct
sustitute for
hexanol, octanol or
decanol PMN
substance A and B
P-07-0492 06/13/07 09/10/07 CBI (G) Dispersant for (G) Maleic anhydride,
petroleum fraction polymer with N-
tetradec-1-ene,N-
hexadec-1-ene and
allylmethyl-
poly[ethylene
glycol], dicocoalkyl-
, di[hydrogenated
tallow] amide/
ammonium salt
P-07-0493 06/13/07 09/10/07 Ticona (S) Fibers (G) Copolymer of 2,6-
naphthalenedicarboxy
lic acid dialkyl
ester and alkylene
diol
P-07-0494 06/13/07 09/10/07 CBI (G) Open non- (G) Polyurethane
dispersive
