Approval for Manufacturing Authority, Motorola Inc. (Mobile Phone Kitting), Fort Worth, Texas, 45221 [E7-15811]

Download as PDF Federal Register / Vol. 72, No. 155 / Monday, August 13, 2007 / Notices Signed at Washington, DC, this 6th day of August 2007. David M. Spooner, Assistant Secretary of Commercefor Import Administration, Alternate Chairman, Foreign–Trade Zones Board. Attest: Andrew McGilvray, Executive Secretary. [FR Doc. E7–15807 Filed 8–10–07; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE Foreign–Trade Zones Board [Order No. 1516] Approval for Manufacturing Authority, Motorola Inc. (Mobile Phone Kitting), Fort Worth, Texas Pursuant to its authority under the Foreign–Trade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the Foreign– Trade Zones Board (the Board) adopts the following Order: Whereas, the Alliance Corridor, Inc., grantee of FTZ 196, has requested manufacturing authority at sites in Fort Worth, Texas on behalf of Motorola Inc. (Motorola) (FTZ Docket 6–2007, filed 2/ 16/2007); Whereas, notice inviting public comment has been given in the Federal Register (72 FR 9304–9305, 3/1/2007); Whereas, the Board adopts the findings and recommendations of the examiner’s report, and finds that the requirements of the FTZ Act and Board’s regulations are satisfied, and that approval of the application is in the public interest; Now, therefore, the Board hereby orders: The application for manufacturing authority within FTZ 196 on behalf of Motorola is approved, subject to the FTZ Act and the Board’s regulations, including § 400.28. jlentini on PROD1PC65 with NOTICES Signed at Washington, DC, this 6th day of August 2007. David M. Spooner, Assistant Secretary of Commercefor Import Administration, Alternate Chairman, Foreign–Trade Zones Board. Attest: Andrew McGilvray, Executive Secretary. [FR Doc. E7–15811 Filed 8–10–07; 8:45 am] BILLING CODE 3510–DS–S VerDate Aug<31>2005 17:04 Aug 10, 2007 Jkt 211001 DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket No. 33–2007] Foreign-Trade Zone 147—Reading, PA; Application for Subzone Souriau USA (Aerospace, Industrial and R/F Connectors); York, PA An application has been submitted to the Foreign-Trade Zones Board (the Board) by the Foreign-Trade Zone Corporation of Southeastern Pennsylvania, grantee of FTZ 147, requesting special-purpose subzone status for the manufacture of aerospace, industrial and R/F connectors at the facility of Souriau USA (Souriau), located in York, Pennsylvania. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the Board (15 CFR part 400). It was formally filed on August 3, 2007. The Souriau facility (110 employees, 5 acres) is located at 25 Grumbacher Road, in York, Pennsylvania. The facility will be used for the kitting of connector parts and manufacturing and storage of cable connectors and assemblies (HTS duty rate ranges from duty-free 3.5%). Components and materials sourced from abroad (representing 95% of the value of the finished product) include: Electrical connectors; and male and female contacts (duty rate 3.5%). FTZ procedures would exempt Souriau from customs duty payments on the foreign components used in export production. The company anticipates that some 95 percent of the plant’s shipments will be exported. On its domestic sales, Souriau would be able to choose the duty rates during customs entry procedures that apply to finished connectors and kits for the foreign inputs noted above. The request indicates that the savings from FTZ procedures would help improve the plant’s international competitiveness. In accordance with the Board’s regulations, a member of the FTZ staff has been designated examiner to investigate the application and report to the Board. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is October 12, 2007. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to October 29, 2007. PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 45221 A copy of the application and accompanying exhibits will be available for public inspection at each of the following locations: U.S. Department of Commerce Export Assistance Center, 2 So. George Street, Cumberland House, Millersville, PA 17551–0302. Office of the Executive Secretary, Foreign-Trade Zones Board, U.S. Department of Commerce, Room 2111, 1401 Constitution Ave., NW., Washington, DC 20230. FOR FURTHER INFORMATION CONTACT: Elizabeth Whiteman at Elizabeth_Whiteman@ita.doc.gov or (202) 482–0473. Dated: August 3, 2007. Andrew McGilvray, Executive Secretary. [FR Doc. 07–3940 Filed 8–10–07; 8:45 am] BILLING CODE 3510–DS–M DEPARTMENT OF COMMERCE International Trade Administration [A–533–809] Certain Forged Stainless Steel Flanges from India: Notice of Final Results and Partial Rescission of Antidumping Duty Administrative Review Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On March 7, 2007, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on certain forged stainless steel flanges from India. This administrative review covers imports from Echjay Forgings Pvt., Ltd. (Echjay) and Rollwell Forge, Ltd. (Rollwell), manufacturers/exporters of the subject merchandise; we are rescinding this review with respect to Shree Ganesh Forgings, Ltd. (Shree Ganesh). The period of review is February 1, 2005, through January 31, 2006. As a result of our analysis of Echjay’s comments we have made no changes to our calculations. With respect to Rollwell, we have calculated a margin rather than use adverse facts available as in the preliminary results. We disclosed the post–preliminary calculated margin to Rollwell on June 6, 2007. In these final results we have made one change to our June 6, 2007 analysis for Rollwell. The final results for both Echjay and Rollwell are listed below in the Final Results of Review section. AGENCY: EFFECTIVE DATE: E:\FR\FM\13AUN1.SGM 13AUN1 August 13, 2007.

Agencies

[Federal Register Volume 72, Number 155 (Monday, August 13, 2007)]
[Notices]
[Page 45221]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-15811]


-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[Order No. 1516]


Approval for Manufacturing Authority, Motorola Inc. (Mobile Phone 
Kitting), Fort Worth, Texas

    Pursuant to its authority under the Foreign-Trade Zones Act of 
June 18, 1934, as amended (19 U.S.C. 81a-81u), the Foreign-Trade 
Zones Board (the Board) adopts the following Order:
    Whereas, the Alliance Corridor, Inc., grantee of FTZ 196, has 
requested manufacturing authority at sites in Fort Worth, Texas on 
behalf of Motorola Inc. (Motorola) (FTZ Docket 6-2007, filed 2/16/
2007);
    Whereas, notice inviting public comment has been given in the 
Federal Register (72 FR 9304-9305, 3/1/2007);
    Whereas, the Board adopts the findings and recommendations of the 
examiner's report, and finds that the requirements of the FTZ Act and 
Board's regulations are satisfied, and that approval of the application 
is in the public interest;
    Now, therefore, the Board hereby orders:
    The application for manufacturing authority within FTZ 196 on 
behalf of Motorola is approved, subject to the FTZ Act and the Board's 
regulations, including Sec.  400.28.
    Signed at Washington, DC, this 6th day of August 2007.

David M. Spooner,
Assistant Secretary of Commercefor Import Administration, Alternate 
Chairman, Foreign-Trade Zones Board.
    Attest:
Andrew McGilvray,
Executive Secretary.
[FR Doc. E7-15811 Filed 8-10-07; 8:45 am]
BILLING CODE 3510-DS-S

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.